WorksPhysics and Astronomy
Switching between Magnetic Bloch and Néel Domain Walls with Anisotropy Modulations
Abstract
It has been shown previously that the presence of a Dzyaloshinskii-Moriya interaction in perpendicularly magnetized thin films stabilizes Néel type domain walls. We demonstrate, using micromagnetic simulations and analytical modeling, that the presence of a uniaxial in-plane magnetic anisotropy can also lead to the formation of Néel walls in the absence of a Dzyaloshinskii-Moriya interaction. It is possible to abruptly switch between Bloch and Néel walls via a small modulation of both the in-plane, but also the perpendicular magnetic anisotropy. This opens up a route towards electric field control of the domain wall type with small applied voltages through electric field controlled anisotropies.
The presence of an interfacial Dzyaloshinskii-Moriya interaction (DMI) in perpendicular (denoted “PP”) magnetized thin films stabilizes Néel type domain walls (DWs) of fixed chirality[1, 2] as opposed to the Bloch DWs favored by magnetostatics that are formed in the absence of a DMI.[3] In nanowires, Néel DWs of fixed chirality have been shown to be driven efficiently in the same direction as the conventional electric current by interfacial spin-orbit torques,[4, 5] making them appealing for potential DW devices.[6]
At the same time, electric field control of magnetism holds the promise of low-power spintronic devices. Particularly the modulation of both in-plane (IP) and PP magnetic anisotropies is well-established. Control is achieved either via interfacial strain transfer from a ferroelectric or piezoelectric substrate and inverse magnetostriction,[7, 8, 9, 10, 11] or via direct charge modulation at the interface with an insulator.[12, 13, 14, 15, 16] The latter modulates the interface anisotropy, which arises from the broken translational symmetry at the interface and spin-orbit coupling (SOC), and can give rise to PP magnetic anisotropy (PMA).[17, 18]
Broken spatial inversion symmetry and SOC are also the ingredients that give rise to the DMI. It emerges at the interface of a ferromagnet with a heavy metal,[19] or more generally at the interface with a different material due to Rashba SOC, as a result of the electrostatic potential difference between the materials.[20] The latter induces a DMI at the interface between a ferromagnetic film and an insulator, and can thus be sensitive to a gate voltage.[21, 22, 23, 24, 25, 26] This has been used for electric field control of magnetic DW motion via the modulation of the DMI.[27, 28] The DMI has also been shown to be sensitive to the application of strain,[25, 29] which opens up the route towards electric field control of DMI via coupling to a piezoelectric or ferroelectric substrate. Still, both mechanisms for tuning the DMI will also affect the magnetic anisotropy, making it difficult to disentangle their effect on magnetic DWs. Furthermore, a switch between DW types (Bloch and Néel), or a reversal of chirality with voltage remains elusive.
Similarly, the voltage control of skyrmions is currently being investigated, and the electric field induced creation, annihilation and even motion have been demonstrated.[22, 30, 31, 32] As for the case of DWs, electric fields generally affect several material parameters, making it difficult to determine the mechanism that allows for this voltage control. Recently, Chen et al. [33] reported that in a magnetic multilayer exhibiting PMA and DMI, the type of DW depends on the relative angle between the DW and a uniaxial IP magnetic anisotropy (IMA) of constant magnitude. Given the strong dependence of spin-orbit torques on DW type and the fact that magnetic anisotropies can be induced and modulated in various ways,[3] this observation raises the question about control — and possibly switching — of DW type with anisotropy modulations. In this letter, we therefore demonstrate an alternative mechanism for the control of DW type: using micromagnetic simulations and analytical modeling, we show that the presence of a uniaxial IMA of fixed orientation can also lead to the formation of Néel DWs in the absence of a DMI. It is possible to abruptly switch between Bloch and Néel DWs via a small modulation of the strength of both the IMA and PMA. This opens up a route towards efficient electric field control of the DW type with small applied voltages, as the magnetic anisotropy strength can be modulated via the direct voltage controlled magnetic anisotropy mechanism,[13, 14] or via magnetoealastic anisotropy induced through coupling to a piezoelectric element.[9, 34]
We investigated this control of DW type through micromagnetic simulations using the OOMMF software package.[35] The simulated geometry is sketched in Figure 1: it consists of a thin film of thickness . The in-plane dimensions are , and two-dimensional periodic boundary conditions[36] are used to simulate an infinite film. Simulations are initialized such that two DWs are stabilized. We choose reasonable values for the saturation magnetization and exchange stiffness .[37, 38, 39] We consider the effects of a PMA with anisotropy constant , a uniaxial IMA along the -direction (perpendicular to the DWs) with anisotropy constant , and an interfacial DMI with constant .
Figure 1. (left) Sketch of the simulation geometry with definition of directions. (right) Definition of in-plane color wheel and domain wall magnetization angle between the magnetization at the centre of the domain wall and the normal to the domain wall.
To simulate a nanowire geometry, the two-dimensional periodic boundary conditions are omitted and the width of the simulations altered in the -direction. The extent of simulations in the -direction is chosen such that DWs are not affected by finite size effects along this dimension. The DW magnetization angle is defined relative to the DW normal (Figure 1). For Bloch DWs , while for Néel DWs or . The DW width is defined as an integral over the magnetization profile of the DW, where is the polar angle between the magnetization direction and the film plane.[40] For an ideal Bloch DW this definition yields , where is the effective anisotropy.[3]
We start by reproducing the well-known effect the DMI has on the chirality of magnetic DWs in PP magnetized thin films. Images of a DW as a function of increasing DMI constant for are shown in Figure 2a. The corresponding is plotted in Figure 2d. As reported previously,[1] the DW magnetization angle rotates continuously from a Bloch towards a Néel configuration as soon as a DMI is present. Above a certain value of , saturates at , i.e. a Néel DW.

Figure 2. Domain wall images as a function of (a) DMI constant and (b) in-plane anisotropy constant for a perpendicular anisotropy constant . (c) Images as a function of for . Corresponding domain wall magnetization angles as a function of (d) , (e) , and (f) .
In the absence of a DMI, an IMA with easy axis perpendicular to the DW also allows for a tuning between Bloch and Néel DWs. The effect of an increasing IMA is shown in Figure 2b. Unlike the DMI, the anisotropy does not immediately affect the DW magnetization angle. As a function of increasing , the DW first remains of Bloch type until it switches abruptly to a Néel DW. This behaviour is highlighted in Figure 2e, where is shown as a function of . Note, that the magnitude of the IMA required to switch between DW types is about two orders of magnitude smaller than the PMA strength and does thus not significantly affect the magnetization in the domains.
For and , a Néel DW is stabilized. As shown in the images of Figure 2c, and the graph in panel (f), an increase in the PMA strength eventually leads to an abrupt switch to a Bloch DW. It is thus possible to switch between DW types by either tuning the IMA or PMA strength.
We further investigate this in a phase diagram (Figure 3a), establishing regions where Néel or Bloch DWs are stabilized as a function of and . We find that for higher values of and lower values of , Néel DWs form. Conversely, for smaller values of and larger values of , Bloch DWs are observed. The transition between Bloch and Néel DWs appears sharp, which is in stark contrast to the continuous transition observed when the DMI constant is changed. A –vs– phase diagram in the Supplemental Information[41] (SI) furthermore reveals that in the presence of a DMI, but absence of IMA, a tuning of the magnitude of has no effect on the DW magnetization angle. It is thus only this new mechanism, involving an IMA, that allows for switching between DW types via a modulation of the PMA strength, at least for the experimentally achievable parameters considered here.
Figure 3. (a) Phase diagram of the domain wall magnetization angle as a function of perpendicular () and in-plane () anisotropy constants. (b) Location of the transition between Bloch and Néel walls for a thin film (blue line), for a nanowire (orange dashed line), and according to the analytical model (black dotted line). (c) Widths of Bloch (green line) and Néel (red dashed line) domain walls just below and above the transition. The analytical expression is shown as a black dotted line.
We investigate this surprising result further by plotting the IMA strength at which the transition occurs as a function of the effective PMA (blue line in Figure 3b). We find a linear dependence of on with slope . The IMA strength at which the switch between DW types occurs thus shows a square root dependence on the effective PMA strength.
To understand this dependence, we construct a simple analytical model. The full derivation can be found in the SI.[41] The model compares the total energies of Bloch and Néel DWs for a given magnitude of and . The widths of both Néel and Bloch DWs are shown as a function of in Figure 3c, along with the theoretical value . We find excellent agreement between them, and therefore make the simplification that both types of DW types exhibit the same width.
We find that in first approximation the difference in DW surface energy between Néel () and Bloch () DWs is given by:
The first term results from the IMA, while the second term is a consequence of magnetostatics. The magnetostatic contribution arises from magnetic volume charges only.[41, 42, 43, 44] For low values of , the magnetostatic energy favoring Bloch DWs dominates. At large values of , the anisotropy energy favoring Néel DWs overcomes the magnetostatic energy. The transition between DW types is expected to occur when the difference in energy is zero. As a result, the DW is expected to switch between Bloch and Néel type when:
This dependence is plotted in Figure 3(b), where excellent agreement between results from micromagnetic simulations (blue line) and the analytical model (black dotted line) is observed. The analytical model thus explains the square root dependence of the IMA strength at which the switch between DW types occurs on the effective PMA strength. The fact that the type of DW that is stabilized also depends on is due to the fact that the IMA contribution in (Eq. (1)) depends on the DW width, which in turn depends on the PMA.
Our simulations correspond to an experimental system where IP and PP magnetic anisotropies can be tuned independently. Electric field control of DW type could be achieved by tuning the strength of one of these anisotropies with a voltage. One way would be to deposit a magnetic multilayer exhibiting PMA onto a piezoelectric substrate to induce a voltage tuneable uniaxial IMA via interfacial strain transfer and inverse magnetostriction.[11, 34] Another approach, that would also allow for local control, would be to tune the PMA strength via charge modulation at an interface.[12, 13, 14, 15, 16] This would of course require the presence of an uniaxial IMA, which could be induced in various ways. One way to achieve this would be to simply utilize the shape anisotropy in a magnetic nanowire to induce a uniaxial IMA. DWs tend to form perpendicular to the nanowire length, while the shape anisotropy induces a uniaxial anisotropy along it, which corresponds to the geometry investigated here. Nanowires are used in most DW applications, and this approach would eliminate the need for a separate mechanism to induce the uniaxial IMA. Figure 4(a) displays the phase diagram for the DW type as a function of and nanowire width . It confirms previous observations of a transition from a Bloch to a Néel DW when the nanowire width is reduced.[45, 46] It does also show that this transition depends on the strength of the PMA. Therefore, it is possible to switch between Bloch and Néel DWs for a given nanowire width when is modulated. We extract the location of the transition and express it in terms of effective anisotropies.[41] The resulting curve is plotted as an orange dashed line in Figure 3(b). It matches the results for thin films and the analytical model well, except for low values of the effective IMA and PMA strengths. We ascribe this to the fact that for wide nanowires (corresponding to a low effective ), expressing magnetostatic effects as a simple uniaxial anisotropy is too crude an approximation. Unlike the case of thin films, the transition between DW types in nanowires does not result from a competition between a magnetic anisotropy and magnetostatics. it is purely the results of magnetostatics: magnetic volume charges favor Bloch DWs, while magnetic surface charges on the edges of the nanowire are minimized for Néel DWs. For a given width of the nanowire, increasing deincreases the width of the DW which leads to a reduction of magnetic surface charges. As a result, Bloch DWs become energetically favorable. Conversely, decreasing increases the build up of magnetic surface charges, thus favoring Néel DWs.
Figure 4. (a) Phase diagram of the domain wall magnetization angle as a function of perpendicular magnetic anisotropy constant and nanowire width . (b) Domain wall images as a function of for nm.
The nanowire geometry also allows for the stabilization of intermediate DW magnetization angles . As highlighted by the inset in Figure 4(a), the transition between Bloch and Néel DWs is not as sharp as in the thin film case. This has already been observed as a function of . [47] As shown in Figure 4(b), tuning between Néel and Bloch DWs with a PMA in nanowires also involves DWs with intermediate .
Stabilizing Néel DWs with an IMA does not favor one chirality, unlike the DMI. Left- and right-handed DWs are energetically degenerate. For applications, it might be necessary to obtain Néel DWs with a fixed chirality. We now show that it is still possible to tune DW type with an anisotropy in the presence of a small DMI that yields DWs of fixed chirality. Phase diagrams as a function of and for fixed values of are shown in the SI. [41] Here, we focus on the phase diagram as a function of and for a fixed value of J/m shown in Figure 5. We observe that while a positive value of can be used to switch from a Bloch to a Néel DW when , a negative value of tunes the Néel DW obtained for large values of towards a Bloch DW. For values of , where an intermediate is obtained, negative and positive values tune the DW towards the Bloch and Néel type, respectively. A negative corresponds to an easy axis along the DW. We observe furthermore that while the transition between Bloch and Néel DWs is abrupt for , it becomes increasingly wider as increases. This is highlighted by the contour lines (blue) for DW magnetization angles of , , and .
Figure 5. Phase diagram of the domain wall magnetization angle as a function of DMI constant and in-plane anisotropy constant for a fixed magnitude of the perpendicular anisotropy constant J/m. Solid blue lines are contour lines of the simulation data for given domain wall magnetization angles of , , and . Dotted black lines are the contour lines expected from the analytical model.
The contour lines can be obtained from our analytical model by including the DMI energy in the DW surface energy. It yields the black dotted lines in Figure 5, showing excellent agreement between micromagnetic simulations and the model, and demonstrating that the contour lines are linear in .[41]
We have therefore shown, using micromagnetic simulations, that the presence of a uniaxial in-plane magnetic anisotropy can lead to the formation of Néel domain walls in the absence of a DMI. It is possible to abruptly switch between Bloch and Néel walls via a small modulation of not only the in-plane, but also the perpendicular magnetic anisotropy. In nanowires, the shape anisotropy can be used to induce the in-plane anisotropy. In this case, tuning between domain wall types with a perpendicular magnetic anisotropy proceeds via intermediate domain wall magnetization angles. The presence of a DMI widens the transition between domain wall types. A simple analytical model accounts for the dependence of domain wall type on both the in-plane and perpendicular magnetic anisotropies, and the DMI. Our results open up the route towards voltage control of domain wall type with small applied voltages through electric field controlled anisotropies. As only Néel domain walls are driven by interfacial spin orbit torques in nanowires, while Bloch domain walls are not, this could allow for efficient control of domain wall motion with electric fields. We expect that our results obtained for DWs can be extended to other chiral spin textures such as skyrmions.
Acknowledgments
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 750147. K.J.A.F. acknowledges support from the Jane and Aatos Erkko Foundation. Work at the Molecular Foundry was supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. This research used the Lawrencium computational cluster resource provided by the IT Division at the Lawrence Berkeley National Laboratory (Supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
References
References
- [1]A. Thiaville, S. Rohart, É. Jué, V. Cros, and A. Fert, EPL 100, 57002 (2012).
- [2]G. Chen, T. Ma, A. N’Diaye, H. Kwon, C. Won, Y. Wu, and A. Schmid, Nat. Commun. 4 (2013).
- [3]A. Hubert and R. Schäfer, Magnetic domains: the analysis of magnetic microstructures (Springer, 1998).
- [4]K.-S. Ryu, L. Thomas, S.-H. Yang, and S. Parkin, Nature Nanotech. 8, 527 (2013).
- [5]S. Emori, U. Bauer, S.-M. Ahn, E. Martinez, and G. Beach, Nat. Mater. 12, 611 (2013).
- [6]S. Parkin, M. Hayashi, and L. Thomas, Science 320, 190 (2008).
- [7]T. Lahtinen, J. Tuomi, and S. van Dijken, Adv. Mater. 23, 3187 (2011).
- [8]R. Streubel, D. Köhler, R. Schäfer, and L. Eng, Phys. Rev. B 87, 054410 (2013).
- [9]G. Yu, Z. Wang, M. A. Bolfath-Beygi, C. He, X. Li, K. Wong, P. Nordeen, H. Wu, G. Carman, X. Han, I. Alhomoudi, P. Amiri, and K. Wang, Appl. Phys. Lett. 106, 072402 (2015).
- [10]P. Shepley, A. Rushforth, M. Wang, G. Burnell, and T. Moore, Sci. Rep. 5, 7921 (2015).
- [11]S. Finizio, M. Foerster, M. Buzzi, B. Krüger, M. Jourdan, C. Vaz, J. Hockel, T. Miyawaki, A. Tkach, S. Valencia, F. Kronast, G. Carman, F. Nolting, and M. Kläui, Phys. Rev. Appl. 1, 021001 (2014).
- [12]M. Niranjan, C.-G. Duan, S. Jaswal, and E. Tsymbal, Appl. Phys. Lett. 96, 222504 (2010).
- [13]T. Maruyama, Y. Shiota, T. Nozaki, K. Ohta, N. Toda, M. Mizuguchi, A. Tulapurkar, T. Shinjo, M. Shiraishi, S. Mizukami, Y. Ando, and Y. Suzuki, Nature Nanotech. 4, 158 (2009).
- [14]Y. Shiota, S. Murakami, F. Bonell, T. Nozaki, T. Shinjo, and Y. Suzuki, Appl. Phys. Express 4, 043005 (2011).
- [15]W.-G. Wang, M. Li, S. Hageman, and C. L. Chien, Nat. Mater. 11, 64 (2012).
- [16]U. Bauer, L. Yao, A. Tan, P. Agrawal, S. Emori, H. Tuller, S. van Dijken, and G. Beach, Nat. Mater. 14, 174 (2015).
- [17]M. Johnson, P. Bloemen, F. den Broeder, and J. de Vries, Rep. Prog. Phys. 59, 1409 (1996).
- [18]A. Aharoni, Introduction to the Theory of Ferromagnetism, 2nd ed. (Clarendon Press, 2001).
- [19]A. Fert and P. M. Levy, Phys. Rev. Lett. 44, 1538 (1980).
- [20]A. Kundu and S. Zhang, Phys. Rev. B 92, 094434 (2015).
- [21]K. Nawaoka, S. Miwa, Y. Shiota, N. Mizuochi, and Y. Suzuki, Appl. Phys. Express 8, 063004 (2015).
- [22]T. Srivastava, M. Schott, R. Juge, V. Křižáková, M. Belmeguenai, Y. Roussigné, A. Bernand-Mantel, L. Ranno, S. Pizzini, S.-M. Chérif, A. Stashkevich, S. Auffret, O. Boulle, G. Gaudin, M. Csshiev, C. Baraduc, and H. Béa, Nano Lett. 18, 4871 (2018).
- [23]W. Zhang, H. Zhong, R. Zang, Y. Zhang, S. Yu, G. Han, G. L. Liu, S. S. Yan, S. Kang, and L. M. Mei, Appl. Phys. Lett. 113, 122406 (2018).
- [24]J. Suwardy, M. Goto, Y. Suzuki, and S. Miwa, Jpn. J. Appl. Phys. 58, 060917 (2019).
- [25]Q. Yang, Y. Cheng, Y. Li, Z. Zhou, J. Liang, X. Zhao, Z. Hu, R. Peng, H. Yang, and M. Liu, Adv. Electron. Mater. 6, 2000246 (2020).
- [26]M. Schott, L. Ranno, H. Béa, C. Baraduc, S. Auffret, and A. Bernand-Mantel, J. Magn. Magn. Mater 520, 167122 (2021).
- [27]T. Koyama, Y. Nakatani, J. Ieda, and D. Chiba, Sci. Adv. 4 (2018).
- [28]T. Koyama, J. Ieda, and D. Chiba, Appl. Phys. Lett. 116, 092405 (2020).
- [29]N. S. Gusev, A. V. Sadovnikov, S. A. Nikitov, M. V. Sapozhnikov, and O. G. Udalov, Phys. Rev. Lett. 124, 157202 (2020).
- [30]P.-J. Hsu, A. Kubetzka, A. Finco, N. Romming, K. von Bergmann, and R. Wiesendanger, Nature Nanotech. 12, 123 (2017).
- [31]M. Schott, A. Bernand-Mantel, L. Ranno, S. Pizzini, J. Vogel, H. Béa, C. Baraduc, S. Auffret, G. Gaudin, and D. Givord, Nano Lett. 17, 3006 (2017).
- [32]C. Ma, X. Zhang, J. Xia, M. Ezawa, W. Jiang, T. Ono, S. N. Piramanayagam, A. Morisako, Y. Zhou, and X. Liu, Nano Letters 19, 353 (2019).
- [33]G. Chen, A. N’Diaye, S. Kang, H. Kwon, C. Won, Y. Wu, Z. Qiu, and A. Schmid, Nat. Commun. 6 (2015).
- [34]S. Li, Q. Xue, H. Du, J. Xu, Q. Li, Z. Shi, X. Gao, M. Liu, T. Nan, Z. Hu, N. X. Sun, and W. Shao, J. Appl. Phys. 117, 17D702 (2015).
- [35]M. Donahue and D. Porter, OOMMF user’s guide, Version 1.0, Interagency Report NISTIR 6376 (National Institute of Standards and Technology, Gaithersburg, MD, 1999).
- [36]W. Wang, C. Mu, B. Zhang, Q. Liu, J. Wang, and D. Xue, Comput. Mater. Sci. 49, 84 (2010).
- [37]J. Stöhr and H. Siegmann, Magnetism: From Fundamentals to Nanoscale Dynamics (Springer, 2006).
- [38]C. Eyrich, W. Huttema, M. Arora, E. Montoya, F. Rashidi, C. Burrowes, B. Kardasz, E. Girt, B. Heinrich, O. N. Mryasov, M. From, and O. Karis, J. Appl. Phys. 111, 07C919 (2012).
- [39]T. Devolder, J.-V. Kim, L. Nistor, R. Sousa, B. Rodmacq, and B. Dieny, J. Appl. Phys. 120, 183902 (2016).
- [40]J. Jakubovics, Philos. Mag. B 38, 401 (1978).
- [41]Supplemental material contains additional phase diagrams and details of the analytical model.
- [42]A. Skaugen, P. Murray, and L. Laurson, Phys. Rev. B 100, 094440 (2019).
- [43]C. J. García-Cervera, Eur. J. Appl. Math 15, 451 (2004).
- [44]R. V. Kohn and V. V. Slastikov, Arch. Ration. Mech. Anal. 178, 227 (2005).
- [45]E. Martinez, L. Torres, and L. Lopez-Diaz, Phys. Rev. B 83, 174444 (2011).
- [46]M. D. DeJong and K. L. Livesey, Phys. Rev. B 92, 214420 (2015).
- [47]B. Boehm, A. Bisig, A. Bischof, G. Stefanou, B. J. Hickey, and R. Allenspach, Phys. Rev. B 95, 180406 (2017).



