betaFeedback

WorksPhysics and Astronomy

Large-Gap Quantum Anomalous Hall Insulators in AATiXX Class

Abstract

We theoretically propose that the monolayer AATiXX family (KTiSb, KTiBi, RbTiSb, SrTiSn) are potential candidates for large-gap quantum anomalous Hall insulators with high Chern number C=2\mathcal{C}=2. Both of the topology and magnetism in these materials are from 3d3d-orbitals of Ti. We construct the tight-binding model with symmetry analysis to reveal the origin of topology. Remarkably, quite different from the conventional ss-dd band inversion, here the topological band inversion within 3d3d orbitals is due to the crystal field and electron hopping, while spin-orbit coupling only trivially gaps out the Dirac cone at Fermi level. The general physics from the 3d3d orbitals here applies to a large class of transition metal compounds with the space group P4/nmmP4/nmm or PP-42m42m and their subgroups.

Introduction

The precise theoretical prediction and experimental realization of the quantum anomalous Hall (QAH) effect set a remarkable example for understanding and engineering topological states of quantum matter in complex materials [1, 2, 3, 4, 5, 6]. The QAH insulator has a topologically nontrivial electronic structure with a finite Chern number [7] characterized by a bulk energy gap but gapless chiral edge states, leading to the quantized Hall effect without an external magnetic field [8]. The QAH effect has been realized in magnetically doped topological insulators (TI) [9, 10, 11, 12, 13], in the intrinsic magnetic TI MnBi2_2Te4_4 [14], in the twisted bilayer graphene [15] and transition metal dichalcogenide heterobilayers [16], with comparable onset temperature of about a few Kelvin. The QAH states have been proposed for low energy cost electronic devices and topological computation [17, 18, 19], however, such low critical temperature is a major obstacle for practical applications. Seeking high-temperature QAH insulators [20, 21, 22, 23, 24, 25] has become an important goal in condensed matter physics and material sciences.

The general mechanism for QAH insulator is the spin polarized band inversion [26], where both the ferromagnetic (FM) ordering and spin-orbit coupling (SOC) are sufficiently strong. Physically, the ferromagnetism favors transition metal elements with 3d3d electron, while strong SOC prefers heavy elements. These considerations constitute the essential ingredients for QAH effect in magnetic TI by introducing magnetic dopants or intercalating magnetic layer [27, 28, 29, 30, 31]. However, the inhomogeneities from magnetic dopants [32] and defects [33] dramatically suppress the exchange gap by several order of magnitude, which fundamentally limits the fully quantized anomalous Hall effect to very low temperatures. The challenge in searching for high-temperature QAH insulators is to synergize the seemingly conflicting requirements of ferromagnetism and SOC.

Here we propose the monolayer ATiX class (KTiSb, KTiBi, RbTiSb, SrTiSn) are potential candidates for large-gap QAH insulators with high-temperature. Their stability, magnetic, electronic, and topological properties are comprehensively investigated by first principles calculations. Remarkably, these materials have Chern number C=2C = 2 in the FM ground state, where topology and magnetism are purely from dd-orbitals of Ti. We further construct the tight-binding model from orbital projected band structure and symmetry analysis to reveal the origin of topology. Remarkably, the band inversion is due to tetrahedral crystal field and hopping, while SOC only trivially gap out the Dirac cone at Fermi level. The general physics from the 3d3d orbitals here applies to material class of transition metal compounds with the space group P4/nmmP4/nmm or PP-42m42m and their subgroups.

Structure and magnetic properties

The monolayer ATiX class has a tetragonal lattice with the space group P4/nmmP4/nmm (No. 129), similar to LiFeSe [22]. As shown in Figure 1(a), each primitive cell includes five atomic layers, where each Ti atom is surrounded by four X atoms form-

Image not extracted

Figure 1. (a) and (b) Side and top views of ATiXATiX monolayer. The 2D material class has a FM ground state along zz axis with spin magnetic moment 2μB2\mu_{\mathrm{B}} per Ti atom. θ\theta is bond angle of X-Ti-X. The Wyckoff positions 2a2a and 2c2c are displayed (notation adopted from Bilbao Crystallographic Server [34, 35, 36]). The key symmetry operations include C4zC_{4z} rotation, MxM_x and MyM_y mirrors, C2xC_{2x} and C2yC_{2y} rotations. (c) Crystal field splitting and schematic diagram of the FM kinetic exchange coupling between Ti atoms.

aa (Å)θ\theta (°)MAE (meV)TcT_c (K)
KTiSb4.491012.6637
KTiBi4.56999.8662
RbTiSb4.531032.0598
SrTiSn4.50981.0436

Table 1. Lattice constants, bond angle, MAE per unit cell, and Curie temperature TcT_c from Monte Carlo simulations.

ing a distorted edge-sharing tetrahedron, and the group IA (or IIA) element A with an ultralow electronegativity easily loses valence electrons and becomes A+A^{+} (or A2+A^{2+}). These QAH materials are obtained from high-throughput screening of insulating ATiX with X from group IVA and VA. Their lattice constants are listed in Table I. The absence of imaginary phonon frequency from the phonon spectra calculations suggest the dynamical stability of monolayer ATiX structure (Fig. S1 [37]). We will mainly discuss KTiSb with similar results for this class.

To determine the magnetic ground state of monolayer ATiX, we compare five magnetic configurations: (i) FM, (ii) checkboard antiferromagnetic (AFM), (iii) collinear AFM, (iv) zigzag AFM, and (v) big zigzag AFM (see Fig. S2 [37]), and find that FM is the ground state (Table S1 [37]). Take KTiSb for example, the calculated energy of FM state is about 290, 277, 146, and 205 meV/Ti lower than the four AFM states, respectively. The energy difference is found to be similar for other monolayer ATiX. The large magnetic energy difference indicates the FM exchange coupling is strong. The magnetocrystalline anisotropy energy (MAE), defined as the total energy difference between in-plane and out-of-plane spin configurations, are listed in Table I, while a positive MAE implies an out-of-plane easy axis.

To elucidate the underlying mechanism of ferromagnetism, we analyze the orbital occupation of Ti atoms. The dd orbitals are split by the tetrahedral crystal field into doublet eg(dxy,dz2)e_g(d_{xy},d_{z^2}) and triplet t2g(dx2−y2,dxz,dyz)t_{2g}(d_{x^2-y^2},d_{xz},d_{yz}) orbitals (Figure 1(c) with coordinates in Figure 1(b)). The energy of ege_g stays lower with respect to t2gt_{2g}, because the latter point towards the negatively charged ligands. Each Ti atom is in the eg2t2g0e_g^2t_{2g}^0 configuration with the magnetic moment of 2μB2\mu_{\mathrm{B}} according to the Hund’s rule, which is consistent with the density functional theory calculation. The exchange between two neighboring Ti atoms with closed eg2e_g^2 subshell must be AFM, which is associated with the Pauli exclusion principle in the virtually excited eg1eg3e_g^1e_g^3 state. Meanwhile, the superexchange from near 90∘90^\circ Ti-X-Ti bond leads to extremely weak FM only [38]. The key is rooted in the FM ege_g-t2gt_{2g} kinetic exchange, the large radius of ligands only cause small crystal field splitting, which further make FM ege_g-t2gt_{2g} exchange dominates over AFM ege_g-ege_g exchange. Furthermore, the abab initio Heisenberg exchange parameters of KTiSb are J1=−72.6J_1=-72.6 meV, J2=−33.1J_2=-33.1 meV, and J3=16.4J_3=16.4 meV for nearest-, next-nearest-, and next-nearest-neighbor Ti-Ti pairs, respectively [37]. Negative J1J_1 means the FM exchange coupling. The Curie temperature for monolayer ATiX are listed in Table I (Fig. S3) by Monte Carlo simulations [37].

Electronic structures. Figure 2(a) displays the electronic structure of monolayer KTiSb with and without SOC. In the absence of SOC, the spin-down bands has an insulating gap, and the spin up bands form a spin polarized Dirac semimetal. Specifically, the two spin-up bands near the Fermi level are mainly contributed by dx2−y2d_{x^2-y^2} and dxyd_{xy} orbitals of Ti (Figure 3(a)), where the Dirac points along Γ\Gamma-X (Γ-Y) are protected by MyM_y (MxM_x). When including SOC, the out-of-plane ferromagnetism breaks MxM_x and MyM_y, and SOC opens a Dirac gap. The anomalous Hall conductance σxy\sigma_{xy} as a function of Fermi energy is calculated in Figure 2(c), which displays a quantized value of 2e2/h2e^2/h within the bulk gap of 187 meV. This indicates the topological nontrivial bands with Chern number C=2C=2, which is consistent with two chiral edge states dispersing within the bulk gap as in the edge local density of states calculations (Figure 2(b)). By further varying the spin orientation from −z-z to +x+x, then to the +z+z axis, the band gap monotonically decreases to close, and then reopens, which is accompanied by the topological phase transitions from C=−2C=-2 to C=2C=2 in Figure 2(i). For in-plane ferromagnetism along xx axis, the gapless Dirac points along Γ\Gamma-XX (Figure 2(g)) are protected by C2xC_{2x}, while the Dirac points along Γ\Gamma-YY are protected by MxM_x. Electronic structure of monolayer KTiBi with similar topological properties are shown in Figure 2(d)-Figure 2(f), with an indirect band gap of 80 meV. The sizable band gap (Table S2) in this family is attributed to the enhanced effective SOC strength of Ti-3d3d orbitals by bonding with the ligand heavy elements.

Image not extracted

Figure 2. Electronic structure and topological properties of monolayer KTiSb and KTiBi. (a)-(c) KTiSb, (d)-(f) KTiSb, The band structure with and without SOC; topological edge states calculated along xx direction; anomalous Hall conductance σxy\sigma_{xy} as a function of Fermi energy, respectively. (g) The band structure for FM along zz- and xx-axis of KTiSb. (h) The edge states along xx axis under FM-xx state of KTiSb. (i) Dependence of band gap and CC on the spin orientation quantified by a polar angle φ\varphi, where φ=0,π/2,π\varphi= 0,\pi/2,\pi denote the +z,+x,−z+z,+x,-z directions, respectively.

Image not extracted

Figure 3. (a) The dd-orbital projected band structures without SOC for spin up of monolayer KTiSb. (b) The IR of high symmetry point at Brillouin zone boundary, where (dxy,dx2−y2)(d_{xy},d_{x^2-y^2}) and (dxz/yz,dz2)(d_{xz/yz},d_{z^2}) are separately displayed. (c) The relation between original (labelled by Γ\Gamma-XX-YY-MM) and unfolded Brillouin zone (labelled by Γ′\Gamma'-X′X'-Y′Y'-M′M'). Here M′M' and Γ′\Gamma' are folded into Γ\Gamma. The coordinates (x,y)(x,y) and (x′,y′)(x',y') are for original and new unit cell, respectively. (d) Lattices of space group PP-4m24m2 (No. 115) and PP-42m42m (No. 111).

Symmetry and origin of topology

To reveal the origin of C=2C=2 topology in the electronic structure, we perform a systematic investigation of orbital projected band structure and symmetry analysis of irreducible representations (IR), and further construct a tight-binding model to recover the essential topological physics. Remarkably, different from the conventional ss-pp or ss-dd band inversion, where SOC not only induces topological band inversion but also opens the Dirac gap. Here, the band inversion is due to crystal field and hopping, while SOC only trivially gap out the Dirac cone at Fermi level.

The orbital projected (spin up) band structures without SOC is shown in Figure 3(a). The band inversion between dxyd_{xy} and dx2−y2d_{x^2-y^2} at Fermi level induces four Dirac points, which are gapped by SOC. Naively, these features seem to explain C=2C=2 phase well with each gapped Dirac point contributing C=1/2C=1/2. However, by calculating IR of the inverted bands at Γ\Gamma (Figure 3(b) left), we find that IR of the two bands Γ1−\Gamma^{-}_{1} and Γ2−\Gamma^{-}_{2} have the same C4zC_{4z} eigenvalue 1 (see character table in Table S3), which indicate the band inversion between dxyd_{xy} and dx2−y2d_{x^2-y^2} is trivial and does not contribute Chern number. We further write down a tight-binding model from the planar orbitals (dxy,dx2−y2)(d_{xy},d_{x^2-y^2}) as H1=∑⟨ij⟩[di†t~ijdj+H.c.]+∑⟨⟨ij⟩⟩[di†t~ij′dj+H.c.]\mathcal{H}_1=\sum_{\langle ij\rangle}[d_i^\dagger\tilde{t}_{ij}d_j+\mathrm{H.c.}]+\sum_{\langle\langle ij\rangle\rangle}[d_i^\dagger\tilde{t}'_{ij}d_j+\mathrm{H.c.}], where ⟨ij⟩\langle ij\rangle and ⟨⟨ij⟩⟩\langle\langle ij\rangle\rangle denote the nearest-neighbor (NN) and next-nearest-neighbor (NNN) sites, respectively, d=(dxyA,dx2−y2A,dxyB,dx2−y2B)Td=(d_{xy}^{A},d_{x^2-y^2}^{A},d_{xy}^{B},d_{x^2-y^2}^{B})^{T}, AA and BB denote the sublattice, t~ij\tilde{t}_{ij} and t~ij′\tilde{t}'_{ij} are hopping matrices terms with SOC included [[37]]. As displayed in Figure 4(a)-Figure 4(c), the Dirac points around Γ\Gamma from the band inversion are indeed gapped by SOC, while the Wilson loop calculation confirms the trivial topology consistent with symmetry consideration. Furthermore, as indicated by IR shown in Figure 4(a), the band structure of H1\mathcal{H}_1 without SOC has level crossing along Γ\Gamma-MM, which is contrary to the first principles calculations. All of these results suggest the topology must originate from other dd orbitals.

Image not extracted

Figure 4. The band structure and Wilson loop of the tight-binding model. (a)-(c) H1\mathcal{H}_1, (d)-(f) H2\mathcal{H}_2, (g)-(i) H\mathcal{H} from all five dd orbitals. The band structure without SOC, with SOC and Wilson loop of the lowest bands below Fermi level, respectively. The IR along symmetry lines and at symmetry points in (a) and (d) are consistent with that in Figure 3(b). (j)-(l) The band structure of H2′\mathcal{H}'_2 from (dxz,dyz,dz2)(d_{xz},d_{yz},d_{z^2}) in the new unit cell with SOC, without SOC and Wilson loop of the lowest band, respectively.

Another band inversion occurs at MM between dxzd_{xz}, dyzd_{yz} and dz2d_{z^2} (Figure 3(b) right), which is about 1 eV away from the Fermi level. The calculated IR are consistent with the Elementary Band Representations (EBR) [[39, 40, 41, 42, 43]] listed in Table II. We further construct a concrete tight-binding model H2\mathcal{H}_2 from nonplanar orbitals dxz,dyzd_{xz},d_{yz} and dz2d_{z^2} to decipher whether the band inversion at MM contributes nontrivial topology. H2=∑⟨ij⟩[ci†t^ijcj+H.c.]+∑⟨⟨ij⟩⟩[ci†t^ij′cj+H.c.]\mathcal{H}_2=\sum_{\langle ij\rangle}[c_i^\dagger\hat{t}_{ij}c_j+\mathrm{H.c.}]+\sum_{\langle\langle ij\rangle\rangle}[c_i^\dagger\hat{t}'_{ij}c_j+\mathrm{H.c.}], where c≡(dxzA,dyzA,dz2A,dxzB,dyzB,dz2B)Tc\equiv(d_{xz}^{A},d_{yz}^{A},d_{z^2}^{A},d_{xz}^{B},d_{yz}^{B},d_{z^2}^{B})^{T}, and t^ij\hat{t}_{ij} and t^ij′\hat{t}'_{ij} are general 6×66\times6 matrices denoting hopping terms with SOC included, which can be simplified by symmetry considerations. The explicit forms are listed in Supplementary Materials [[37]]. As displayed in Figure 4(d)-Figure 4(f), we use typical parameters by matching all of the IR along symmetry lines and symmetry points with Figure 3(b) and recover band inversion between M2M_2 and M3M_3. The four Dirac points along Γ\Gamma-MM gapped by SOC contribute a total Chern number C=4×1/2=2C=4\times1/2=2, which is consistent with Wilson loop of the two lowest bands. Thus the band inversion at MM accounts for C=2C=2 in monolayer ATiX.

To fully understand the band structure and topology in Figure 3(a), we need to include all of the five dd orbitals.

Γ\GammaXXMM
dxyd_{xy}Γ1−(1)⊕Γ4+(1)\Gamma^{-}_{1}(1)\oplus\Gamma^{+}_{4}(1)X2(2)X_2(2)M2(2)M_2(2)
dx2−y2d_{x^2-y^2}Γ2−(1)⊕Γ3+(1)\Gamma^{-}_{2}(1)\oplus\Gamma^{+}_{3}(1)X1(2)X_1(2)M1(2)M_1(2)
dz2d_{z^2}Γ1+(1)⊕Γ4−(1)\Gamma^{+}_{1}(1)\oplus\Gamma^{-}_{4}(1)X1(2)X_1(2)M2(2)M_2(2)
dxz,dyzd_{xz},d_{yz}Γ5+(2)⊕Γ5−(2)\Gamma^{+}_{5}(2)\oplus\Gamma^{-}_{5}(2)X1(2)⊕X2(2)X_1(2)\oplus X_2(2)M3(2)⊕M4(2)M_3(2)\oplus M_4(2)

Table 2. EBR without time-reversal symmetry for space group P4/nmmP4/nmm from Wyckoff position 2a2a.

From the above analysis, H1\mathcal{H}_1 from (dxy,dx2−y2)(d_{xy},d_{x^2-y^2}) without SOC accounts for the trivial band crossing along Γ\Gamma-X and Γ\Gamma-Y, but it inevitably introduces level crossing along Γ\Gamma-M. H2\mathcal{H}_2 from (dxz,dyx,dz2)(d_{xz},d_{yx},d_{z^2}) without SOC accounts for the topological band inversion at M, but it inevitably introduces level crossing along Γ\Gamma-M. As shown in Figure 4(a) and Figure 4(d), the IRs of the two crossed bands along Γ\Gamma-M are Σ3\Sigma_3 and Σ4\Sigma_4 in H1\mathcal{H}_1, which is just the opposite to that in H2\mathcal{H}_2. This symmetry analysis simply indicates by including inter-orbital hopping (as H12\mathcal{H}_{12}) between (dxy,dx2−y2)(d_{xy},d_{x^2-y^2}) and (dxz,dyx,dz2)(d_{xz},d_{yx},d_{z^2}), the symmetry protected band crossing along Γ\Gamma-M will be gapped even in the absence of SOC. This is clearly demonstrated in Figure 4(g) for H=H1+H2+H12\mathcal{H}=\mathcal{H}_1+\mathcal{H}_2+\mathcal{H}_{12} without SOC [37], which leaves the Dirac points along Γ\Gamma-X and Γ\Gamma-Y only. Then putting the SOC back, we see a full gap opening in Figure 4(h), and the Wilson loop for the lowest four band is topological which is equal to the direct sum of Figure 4(c) and Figure 4(f). There is a subtlety point in Figure 3(a) worth mentioning, that at Γ\Gamma the two-fold degenerate IR Γ5−\Gamma_5^- from dxz,dyzd_{xz},d_{yz} energetically lies below Γ1+(1)⊕Γ4−(1)\Gamma_1^+(1)\oplus\Gamma_4^-(1) from dz2d_{z^2}. This will not affect the topology due to opposite angular momentum from dxz±idyzd_{xz}\pm id_{yz}. Now, we understand the essential physics and reproduce the main result in Figure 3(a) and Figure 3(b) by a five dd-orbital model in Figure 4(h). Since the topological band inversion is contributed by dxzd_{xz}, dyxd_{yx}, and dz2d_{z^2} far away from Fermi level, the chiral edge states alway exist irrespective of the band crossing or gap opening along Γ\Gamma-X (Y). This explains the edge states in Figure 2(h) for FM along xx axis.

Finally, we provide an intuitive understanding why the band inversion from (dxz,dyz)(d_{xz},d_{yz}) and dz2d_{z^2} at M leads to high Chern number C=2C=2. For the unit cell in Figure 1(b), the elements at Wyckoff position 2c introduce the difference between A and B sublattice of Ti at Wyckoff position 2a. Since the topology is purely from the dd orbitals of Ti, if we ignore the difference between A and B sublattices, we can construct a new square lattice with the unit cell containing a single Ti atom (gray dash line in Figure 3(c)). The relation between unfolded (labelled by Γ′\Gamma'-X'-Y'-M') and original Brillouin zone is also displayed. Now we can rewrite H2\mathcal{H}_2 in the new unit cell as H2′\mathcal{H}'_2 from nonplanar orbitals dxz,dyzd_{xz},d_{yz} and dz2d_{z^2} only [37], and replot the band structure as shown in Figure 4(j), the band structure without SOC along Γ′\Gamma'-X'-X'-Γ′\Gamma' (black line) together with M'-X-X'-M' (gray line) almost reproduces the band features in Figure 4(d), i.e., the band structure of H1\mathcal{H}_1 is almost the folding of that of H1′\mathcal{H}'_1. According to band folding picture, the band inversion at M in the original Brillouin zone now is related to band inversion at X' in the unfolded Brillouin zone as shown in Figure 4(k). There is a C2zC_{2z} rotational symmetry at X', so the band inversion between angular momentum ℓz=±1\ell_z=\pm1 of dxz,dyzd_{xz},d_{yz} and ℓz=0\ell_z=0 of dz2d_{z^2} at X' is similar to a ss-pp band inversion with C=1C=1. The same band inversion also happens around Y' from C4zC_{4z} with another C=1C=1. Then the total Chern number is C=1+1=2C=1+1=2, which is consistent with the Wilson loop calculation in Figure 4(l). Now both X' and Y' are folded into M without gap closing, then the total Chern number of the folded bands below Fermi level remains the same.

Generalization and discussion

The model and analysis from dd orbitals above are general, and also apply to the previous reported C=2C=2 QAH insulator in monolayer TiTe [23], LiFeSe [22], FeI [24] with similar dd-orbital projected band structure and IR (Fig. S9 [37]), where the origin of topology from (dxz,dyz)(d_{xz},d_{yz}) and dz2d_{z^2} at M were overlooked. The topological physics in TiTe is from dd-orbitals of Ti at Wyckoff position 2a of space group P4/nmmP4/nmm, which is in the eg1t2g0e_g^{1}t_{2g}^{0} configuration with occupied dxyd_{xy} and dz2d_{z^2} for majority spin in the polarized state. While in LiFeSe [22] and FeI [24], each Fe takes the Wyckoff position 2a of P4/nmmP4/nmm and is in the eg4t2g3=eg2↑t2g3↑eg2↓t2g1↓e_g^4t_{2g}^3=e_g^{2\uparrow}t_{2g}^{3\uparrow}e_g^{2\downarrow}t_{2g}^{1\downarrow} configuration. The ege_g-t2gt_{2g} kinetic exchange leads to ultrastable FM, and the system is in a spin polarized state with occupied dxyd_{xy} and dz2d_{z^2} for minority spin. The similar polarized eg2t2g2e_g^{2}t_{2g}^{2} configuration with C4zC_{4z} rotational symmetry in all of these materials (Ti or Fe lattices) give rise to C=2C = 2 QAH phase with the same origin of topology.

The key ingredient for the C=2C = 2 phase is the polarized eg2t2g0e_{g}^{2}t_{2g}^{0} configuration of dd orbitals, which is generated by the distorted tetrahedral crystal field by ligands at Wyckoff position 2c. The distortion of tetrahedron will lift the degeneracy within t2gt_{2g} and ege_g, and determine the splitting and relative energetics between planar and nonplanar orbitals (Fig. S10 [37]). As long as the crystal field splitting is small compared to the dd orbital band width, the five dd orbital model here always works, namely, dxzd_{xz}, dyzd_{yz} and dz2d_{z^2} give rise to the topological band inversion. Here we suggest several layer groups in Table III, which are compatible with such a crystal field and have square lattice structure with C4zC_{4z} symmetry. For example, the most simple structures are P-4m2P\text{-}4m2 and P-42mP\text{-}42m shown in Figure 3(d). We propose similar electronic structure with same topological properties can be found in transition metal compounds with these space groups, when the dd orbital configuration eg2t2g0e_{g}^{2}t_{2g}^{0} is fulfilled. Interestingly, the octahedral crystal field could also lead to t2gt_{2g} and ege_g splitting with opposite energy sequence, the polarized t2g3eg0t_{2g}^{3}e_{g}^{0} configuration of dd orbitals together with C4zC_{4z} from certain transition metal may also lead to C=2C = 2 QAH phase, the concrete material family is left for future study.

Space groupP4/nmmP4/nmmP-42mP\text{-}42m
SubgroupP4/nP4/n, P4212P4_{2}12, P-4m2P\text{-}4m2, P-421mP\text{-}42_{1}mN/A

Table III. Two typical layer groups and their subgroups which are compatible with distorted tetrahedral crystal field and C4zC_{4z} rotational symmetry.

In summary, our work uncover C=2C = 2 QAH phase from 3d3d orbitals which applies to a large class of materials in the space group P4/nmmP4/nmm. We hope the theoretical work here can aid the search for new QAH insulators in transition metal compounds.

Acknowledgments

This work is supported by the National Key Research Program of China under Grant No. 2019YFA0308404, the Natural Science Foundation of China through Grant No. 12174066, Science and Technology Commission of Shanghai Municipality under Grant No. 20JC1415900, the Innovation Program for Quantum Science and Technology through Grant No. 2021ZD0302600, Shanghai Municipal Science and Technology Major Project under Grant No. 2019SHZDZX01.

References

  1. [1]M. Z. Hasan and C. L. Kane, “Colloquium: Topological insulators,” Rev. Mod. Phys. 82, 3045–3067 (2010).
  2. [2]Xiao-Liang Qi and Shou-Cheng Zhang, “Topological insulators and superconductors,” Rev. Mod. Phys. 83, 1057–1110 (2011).DOI
  3. [3]Yoshinori Tokura, Kenji Yasuda, and Atsushi Tsukazaki, “Magnetic topological insulators,” Nature Rev. Phys. 1, 126–143 (2019).
  4. [4]Jing Wang and Shou-Cheng Zhang, “Topological states of condensed matter,” Nature Mat. 16, 1062–1067 (2017).DOI
  5. [5]Cui-Zu Chang, Chao-Xing Liu, and Allan H. MacDonald, “Colloquium: Quantum anomalous hall effect,” arXiv: 2202.13902 (2022), 10.48550/ARXIV.2202.13902.DOI
  6. [6]B. Andrei Bernevig, Claudia Felser, and Haim Beidenkopf, “Progress and prospects in magnetic topological materials,” Nature 603, 41–51 (2022).DOI
  7. [7]D. J. Thouless, M. Kohmoto, M. P. Nightingale, and M. den Nijs, “Quantized hall conductance in a two-dimensional periodic potential,” Phys. Rev. Lett. 49, 405–408 (1982).
  8. [8]F. D. M. Haldane, “Model for a quantum hall effect without landau levels: Condensed-matter realization of the “parity anomaly”,” Phys. Rev. Lett. 61, 2015–2018 (1988).pubmed.ncbi.nlm.nih.gov/10038961
  9. [9]Cui-Zu Chang, Jingsong Zhang, Xiao Feng, Jie Shen, Zuocheng Zhang, Minghua Guo, Kang Li, Yumbo Ou, Pang Wei, Li-Li Wang, Zhong-Qing Ji, Yang Feng, Shuaihua Ji, Xi Chen, Jinfeng Jia, Xi Dai, Zhong Fang, Shou-Cheng Zhang, Ke He, Yayu Wang, Li Lu, Xu-Cun Ma, and Qi-Kun Xue, “Experimental Observation of the Quantum Anomalous Hall Effect in a Magnetic Topological Insulator,” Science 340, 167–170 (2013).DOI
  10. [10]Cui-Zu Chang, Weiwei Zhao, Duy K. Kim, Haijun Zhang, Badih A. Assaf, Don Heiman, Shou-Cheng Zhang, Chaoxing Liu, Moses H. W. Chan, and Jagadeesh S. Moodera, “High-precision realization of robust quantum anomalous hall state in a hard ferromagnetic topological insulator,” Nature Matter. 14, 473 (2015).DOI
  11. [11]M. Mogi, R. Yoshimi, A. Tsukazaki, K. Yasuda, Y. Kozuka, K. S. Takahashi, M. Kawasaki, and Y. Tokura, “Magnetic modulation doping in topological insulators toward higher-temperature quantum anomalous hall effect,” Appl. Phys. Lett. 107, 182401 (2015).DOI
  12. [12]A. J. Bestwick, E. J. Fox, Xufeng Kou, Lei Pan, Kang L. Wang, and D. Goldhaber-Gordon, “Precise quantization of the anomalous hall effect near zero magnetic field,” Phys. Rev. Lett. 114, 187201 (2015).pubmed.ncbi.nlm.nih.gov/26001016
  13. [13]R. Watanabe, R. Yoshimi, M. Kawamura, M. Mogi, A. Tsukazaki, X. Z. Yu, K. Nakajima, K. S. Takahashi, M. Kawasaki, and Y. Tokura, “Quantum anomalous hall effect driven by magnetic proximity coupling in all-telluride based heterostructure,” Appl. Phys. Lett. 115, 102403 (2019).DOI
  14. [14]Yujun Deng, Yijun Yu, Meng Zhu Shi, Zhongxun Guo, Zihan Xu, Jing Wang, Xian Hui Chen, and Yuanbo Zhang, “Quantum anomalous hall effect in intrinsic magnetic topological insulator mnbi2te4,” Science 367, 895–900 (2020).DOI
  15. [15]M. Serlin, C. L. Tschirhart, H. Polshyn, Y. Zhang, J. Zhu, K. Watanabe, T. Taniguchi, L. Balents, and A. F. Young, “Intrinsic quantized anomalous hall effect in a moiré heterostructure,” Science 367, 900–903 (2020).DOI
  16. [16]Tingxin Li, Shengwei Jiang, Bowen Shen, Yang Zhang, Lizhong Li, Zui Tao, Trithep Devakul, Kenji Watanabe, Takashi Taniguchi, Liang Fu, Jie Shan, and Kin Fai Mak, “Quantum anomalous hall effect from intertwined moiré bands,” Nature 600, 641–646 (2021).DOI
  17. [17]Xiao-Liang Qi, Taylor L. Hughes, and Shou-Cheng Zhang, “Chiral topological superconductor from the quantum hall state,” Phys. Rev. B 82, 184516 (2010).DOI
  18. [18]Jing Wang, Quan Zhou, Biao Lian, and Shou-Cheng Zhang, “Chiral topological superconductor and half-integer conductance plateau from quantum anomalous hall plateau transition,” Phys. Rev. B 92, 064520 (2015).DOI
  19. [19]Biao Lian, Xiao-Qi Sun, Abolhassan Vaezi, Xiao-Liang Qi, and Shou-Cheng Zhang, “Topological quantum computation based on chiral majorana fermions,” Proc. Natl. Acad. Sci. USA 115, 10938–10942 (2018).DOI
  20. [20]Jing-Yang You, Zhen Zhang, Bo Gu, and Gang Su, “Two-dimensional room-temperature ferromagnetic semiconductors with quantum anomalous hall effect,” Phys. Rev. Applied 12, 024063 (2019).DOI
  21. [21]Jiaxiang Sun, Xin Zhong, Wenwen Cui, Jingming Shi, Jian Hao, Meiling Xu, and Yinwei Li, “The intrinsic magnetism, quantum anomalous hall effect and curie temperature in 2d transition metal trihalides,” Phys. Chem. Chem. Phys. 22, 2429–2436 (2020).DOI
  22. [22]Yang Li, Jiaheng Li, Yang Li, Meng Ye, Fawei Zheng, Zetao Zhang, Jingheng Fu, Wenhui Duan, and Yong Xu, “High-temperature quantum anomalous hall insulators in lithium-decorated iron-based semiconductor materials,” Phys. Rev. Lett. 125, 086401 (2020).DOI
  23. [23]X. Xuan, Z. Zhang, C. Chen, and W. Guo, “Robust quantum anomalous hall states in monolayer and few-layer tite,” Nano Lett. 22, 5379–5384 (2022).DOI
  24. [24]Qilong Sun, Yandong Ma, and Nicholas Kioussis, “Two-dimensional dirac spin-gapless semiconductors with tunable perpendicular magnetic anisotropy and a robust quantum anomalous hall effect,” Mater. Horiz 7, 2071–2077 (2020).DOI
  25. [25]Zeyu Li, Yulei Han, and Zhenhua Qiao, “Chern number tunable quantum anomalous hall effect in monolayer transitional metal oxides via manipulating magnetization orientation,” Phys. Rev. Lett. 129, 036801 (2022).DOI
  26. [26]Chao-Xing Liu, Xiao-Liang Qi, Xi Dai, Zhong Fang, and Shou-Cheng Zhang, “Quantum anomalous hall effect in Hg₁₋ᵧMnᵧTe quantum wells,” Phys. Rev. Lett. 101, 146802 (2008).pubmed.ncbi.nlm.nih.gov/18851555
  27. [27]Rui Yu, Wei Zhang, Hai-Jun Zhang, Shou-Cheng Zhang, Xi Dai, and Zhong Fang, “Quantized Anomalous Hall Effect in Magnetic Topological Insulators,” Science 329, 61–64 (2010).DOI
  28. [28]Jing Wang, Biao Lian, and Shou-Cheng Zhang, “Quantum anomalous hall effect in magnetic topological insulators,” Phys. Scr. T164, 014003 (2015).DOI
  29. [29]Dongqin Zhang, Minji Shi, Tongshuai Zhu, Dingyu Xing, Haijun Zhang, and Jing Wang, “Topological axion states in the magnetic insulator mnbi₂te₄ with the quantized magnetoelectric effect,” Phys. Rev. Lett. 122, 206401 (2019).DOI
  30. [30]Jiaheng Li, Yang Li, Shiqiao Du, Zun Wang, Bing-Lin Gu, Shou-Cheng Zhang, Ke He, Wenhui Duan, and Yong Xu, “Intrinsic magnetic topological insulators in van der waals layered mnbi₂te₄-family materials,” Sci. Adv. 5, eaaw5685 (2019).DOI
  31. [31]M. M. Otrokov, I. P. Rusinov, M. Blanco-Rey, M. Hoffmann, A. Yu. Vyazovskaya, S. V. Eremeev, A. Ernst, P. M. Echenique, A. Arnau, and E. V. Chulkov, “Unique thickness-dependent properties of the van der waals interlayer antiferromagnet mnb i₂te₄ films,” Phys. Rev. Lett. 122, 107202 (2019).DOI
  32. [32]Yi Xue Chong, Xiaolong Liu, Rahul Sharma, Andrey Kostin, Genda Gu, K. Fujita, J. C. Séamus Davis, and Peter O. Sprau, “Severe dirac mass gap suppression in sb₂te₃-based quantum anomalous hall materials,” Nano Lett. 20, 8001–8007 (2020).DOI
  33. [33]M. Garnica, M. M. Otrokov, P. Casado Aguilar, I. I. Klimovskikh, D. Estyunin, Z. S. Aliev, I. R. Amiraslanov, N. A. Abdullayev, V. N. Zverev, M. B. Babany, N. T. Mamedov, A. M. Shikin, A. Arnau, A. L. Vázquez de Parga, E. V. Chulkov, and R. Miranda, “Native point defects and their implications for the dirac point gap at mnb i₂te₄(0001),” npj Quantum Mater. 7, 7 (2022).
  34. [34]M I Arroyo, J M Perezmato, C Apillas, E Kroumova, Svetoslav Ivanchev, G Madariaga, A Kirov, and Hans Wondratschek, “Bilbao crystallographic server: I. databases and crystallographic computing programs,” Z. Krist. 221, 15–27 (2006).DOI
  35. [35]Asen Kirov, Cesar Capillas, J Perez-Mato, and Hans Wondratschek, “Bilbao crystallographic server. ii. representations of crystallographic point groups and space groups,” Acta Cryst. 62, 115–28 (2006).pubmed.ncbi.nlm.nih.gov/16489249
  36. [36]J. Perez-Mato, D Orobengoa, Emre Tasci, Gemma De la Flor Martin, and A Kirov, “Crystallography online: Bilbao crystallographic server,” Bulg. Chem. Commun. 43, 183–197 (2011).
  37. [37]See Supplemental Material for methods and technical details.
  38. [38]Daniel I. Khomskii, Transition Metal Compounds (Cambridge University Press, 2004).
  39. [39]Jorrit Kruthoff, Jan de Boer, Jasper van Wezel, Charles L. Kane, and Robert-Jan Slager, “Topological classification of crystalline insulators through band structure combinatorics,” Phys. Rev. X 7, 041069 (2017).DOI
  40. [40]Barry Bradlyn, L Elcoro, Jennifer Cano, MG Vergniory, Zhijun Wang, C Felser, MI Aroyo, and B Andrei Bernevig, “Topological quantum chemistry,” Nature 547, 298 (2017).DOI
  41. [41]M. G. Vergniory, L. Elcoro, Zhijun Wang, Jennifer Cano, C. Felser, M. I. Aroyo, B. Andrei Bernevig, and Barry Bradlyn, “Graph theory data for topological quantum chemistry,” Phys. Rev. B 96, 235130 (2017).DOI
  42. [42]L. Elcoro, Barry Bradlyn, Z. Wang, M. G. Vergniory, Jennifer Cano, C. Felser, B. Bernevig, D. Orobengoa, G. D. L. Flor, and M. Aroyo, “Double crystallographic groups and their representations on the bilbao crystallographic server,” J. Appl. Crystallogr 50, 1457 (2017).DOI
  43. [43]Adrien Bouhon, Gunnar F. Lange, and Robert-Jan Slager, “Topological correspondence between magnetic space group representations and subdimensions,” Phys. Rev. B 103, 245127 (2021).DOI

Paper details

vlnc:W_pgzsc6wx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents