betaFeedback

WorksPhysics and Astronomy

SrRuO3 under tensile strain: Thickness-dependent electronic and magnetic properties

Abstract

The burgeoning fields of spintronics and topological electronics require materials possessing a unique combination of properties: ferromagnetism, metallicity, and chemical stability. SrRuO3 (SRO) stands out as a compelling candidate due to its exceptional combination of these attributes. However, understanding its behavior under tensile strain, especially its thickness-dependent changes, remains elusive. This study employs machine-learning-assisted molecular beam epitaxy to investigate SRO films with thicknesses from 1 to 10 nm. This work complements the existing focus on compressive-strained SRO, opening a new avenue for exploring its hitherto concealed potential. Using soft X-ray magnetic circular dichroism, we uncover an intriguing interplay between film thickness, electronic structure, and magnetic properties. Our key findings reveal an intensified localization of Ru 4d t2g-O 2p hybridized states at lower thicknesses, attributed to the weakened orbital hybridization. Furthermore, we find a progressive reduction of magnetic moments for both Ru and O ions as film thickness decreases. Notably, a non-ferromagnetic insulating state emerges at a critical thickness of 1 nm, marking a pivotal transition from the metallic ferromagnetic phase. These insights emphasize the importance of considering thickness-dependent properties when tailoring SRO for next-generation spintronic and topological electronic devices.

Introduction

Due to its unique combination of ferromagnetism, metallicity, chemical stability, and compatibility with other perovskite-structured oxides, the 4d4d itinerant ferromagnetic perovskite SrRuO3_3 (SRO), whose bulk Curie temperature (TCT_{\mathrm{C}}) is 165 K, has been extensively studied. [1, 2, 3, 4, 5, 6, 7, 8, 9] The recent observations of Weyl fermions in it has sparked renewed attention for investigating unique quantum transport phenomena and possible applications in the field of topological electronics.[10, 11, 12, 13, 14] In addition, a ferromagnetic state at a single monolayer SRO has been reported,[15] making it a unique candidate for realizing single-layer magnetic Weyl semimetals. Additionally, it has been reported that SRO exhibits spin-related transport phenomena such as tunneling magnetoresistance[16] and current-injected magnetization switching,[17] making SRO promising for applications in spintronics.

The successful integration of SRO into spintronics and topological electronics necessitates comprehensive consideration of its strain-dependent electrical and magnetic properties at heterointerfaces, particularly under the ubiquitous presence of epitaxial strain arising from lattice mismatch. While the thickness dependence of these properties under compressive strain on SrTiO3_3 (STO) (001) substrates has been extensively investigated,[15, 18, 19, 20, 21, 22] a critical knowledge gap exists concerning SRO under tensile strain. Notably, in compressive-strained SRO films, a well-defined critical thickness of ∼2\sim2 nm marks the transition to a non-ferromagnetic, insulating state. However, the strong coupling between lattice, electron, and spin degrees of freedom in SRO[23, 24, 25, 26, 27] casts doubt on the direct extrapolation of this behavior to tensile strain scenarios. Therefore, a systematic investigation of the thickness-dependent evolution of electronic and magnetic properties in tensile-strained SRO films is an urgent and paramount endeavor.

In this study, we investigated the magnetic and electrical properties of tensile-strained SRO films with thicknesses t=1t = 1–10 nm grown by machine-learning-assisted molecular beam epitaxy (ML-MBE).[28, 29, 30] The transport properties were characterized by magnetotransport measurements. The element-specific electronic structure and magnetic properties of the Ru 4d4d and O 2p2p states were clarified using soft X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD).[31, 32, 33, 34] Our investigation reveals a pronounced localization of the Ru 4d4d t2gt_{2g}-O 2p2p hybridized states with decreasing film thickness (tt). The magnetic moments of Ru and O ions decreased with decreasing tt and the SRO film became nonferromagnetic at t=1t = 1 nm. The increased localization also resulted in insulating electrical properties of the SRO films with t=1t = 1 and 2 nm. These results indicate that the localization due to disorders near the interface[35, 36] weakens orbital hybridization and causes the change from a ferromagnetic metallic state in thick films to a nonferromagnetic insulating state at t=1t = 1 nm.

Methods

We grew epitaxial SRO films having 0.8% tensile strain with tt of 1, 2, and 10 nm on TSO (110) substrates [Fig. 1(a)] in an MBE system equipped with multiple e-beam evaporators for Sr and Ru. The oxidation during growth was carried out with a mixture of ozone (O3_3) and O2_2 gas (∼\sim15% O3_3 + ∼\sim85% O2_2). All SRO films were prepared under the same growth conditions as in Ref. 27, in which detailed crystallographic analyses by θ\theta–2θ2\theta X-ray diffraction and high-resolution X-ray reciprocal space mapping for the SRO film with t=60t = 60 nm on TSO (110) substrate were reported. The growth parameters were optimized by Bayesian optimization, a machine learning technique.[28, 37] The sharp streaky reflection high-energy electron diffraction patterns confirmed in-plane epitaxial growth of the SRO films. Further information about the MBE setup and preparation of the substrates is described elsewhere.[28, 38]

Magnetotransport was measured using a standard four-probe method with Ag electrodes deposited on the SRO surface in a DynaCool physical property measurement system (PPMS).

The XAS and XMCD measurements were performed at the helical undulator beamline BL25SU of SPring-8.[39, 40] The monochromator resolution E/ΔEE/\Delta E was over 5,000 at the Ru M2,3M_{2,3} edges. The designed beam spot size was 10×10010 \times100–200 μm2200\ \mu\mathrm{m}^{2}. For the XMCD measurements, absorption spectra for circularly polarized X-rays with the photon helicity parallel (μ+\mu^{+}) or antiparallel (μ−\mu^{-}) to the spin polarization were obtained by reversing the photon helicity at each photon energy hνh\nu and recording them in the total-electron-yield (TEY) mode. The measurement temperature was 30 K. All XAS and XMCD spectroscopy measurements were performed at 1.92 T, the maximum applied magnetic field in the system.[39, 40] The μ+\mu^{+} and μ−\mu^{-} spectra at the Ru M2,3M_{2,3} edges and O K edge were taken under both positive and negative applied magnetic fields and averaged to eliminate spurious dichroic signals. To estimate the integrated values of the XAS spectra at the Ru M2,3M_{2,3} edges, hyperbolic tangent functions as background were subtracted from the spectra. To measure the perpendicular and in-plane magnetic moments, the angles of the external magnetic fields and incident X-rays measured from the sample surfaces were set to θ=90∘\theta= 90^\circ and 20°, respectively [Figure 1(b) and Figure 1(c)].

Image not extracted

Figure 1. Schematic diagrams depict the sample and crystal structures of the SRO films. In the crystal image, strontium, oxygen, ruthenium, and titanium are represented by yellow, blue, red, and purple spheres, respectively. Illustrations outline the measurement configurations for (b) perpendicular and (c) in-plane XAS and XMCD measurements.

RESULTS

Figure 2(a) shows the temperature dependence of the longitudinal resistivity ρ\rho for 0.8% tensile-strained epitaxial single-crystalline SRO films with thicknesses tt of 1, 2, 4, and 10 nm on TbScO3_{3} (TSO) (110) substrates grown by ML-MBE. TSO has the GdFeO3_{3} structure, which is a distorted perovskite structure with the (110) face corresponding to the pseudocubic (001) face. The ρ\rho values of the films with t=10t = 10 and 4 nm decreases with decreasing temperature TT, indicating that these films are metallic in the whole measurement temperature range. Similarly, the ρ\rho value of the 2-nm film decreases upon decreasing temperature from 300 K down to 26.5 K, but for T<26.5T < 26.5 K, ρ\rho increases with decreasing temperature, indicating insulating behavior due to weak localization of charge carriers in the low-temperature region.[15, 22] With a further decrease in tt to 1 nm [inset in Figure 2(a)], the film shows insulating behavior (dρ/dTd\rho/dT is negative) for the whole measurement temperature range. In addition, the thinner the film is, the larger the ρ\rho value becomes at each temperature. These results suggest that the interface-driven disorder causes increased resistivity and carrier localization. The residual resistivity ratio (RRR) [=ρ(300 K)/ρ(2 K)=\rho(300\ \mathrm{K})/\rho(2\ \mathrm{K})] of the SRO film with t=10t = 10 nm was 10.1. This value is smaller than that for the -0.7% compressive-strained SRO film on STO (001) substrate with t=10t = 10 nm (RRR = 21) grown by ML-MBE reported in Ref. 22. Furthermore, the -0.7% compressive-strained SRO/STO film with t=2t = 2 nm does not show insulating behavior at low temperatures.[22] While the magnitude of the absolute strain experienced by compressive-strained SRO/STO and tensile-strained SRO/TSO films may be comparable, the former exhibits a significantly higher RRR. This discrepancy, which exists even though the growth conditions are optimized by Bayesian optimization in both strain cases, highlights the profound influence of strain type on SRO's electrical properties. Notably, the emergence of an insulating state at 2 nm only in tensile-strained SRO further underscores this distinction. Considering the importance of minimizing Joule heating and energy loss in heteroepitaxial devices, these findings suggest that compressive-strained SRO, with its higher conductivity and metallic behavior at thinner thicknesses, presents a more suitable choice for metallic ferromagnetic oxide electrodes. When t=10t = 10 or 4 nm, the ρ\rho vs TT curves show a clear kink [Figure 2(a)], at which the ferromagnetic transition occurs and spin-dependent scattering is suppressed.[4] To highlight this transition, Curie temperature TCT_{\mathrm{C}} at which the dρ/dTd\rho/dT curves show a peak is also shown in black arrows in Fig. 2(a). Note that, generally, TCT_{\mathrm{C}} determined from dρ/dTd\rho/dT is a few kelvins lower than the values measured from the temperature dependence of the magnetization.[41] The TCT_{\mathrm{C}} value decreases with decreasing tt from 10 nm to 2 nm. This criterion to define TCT_{\mathrm{C}} cannot be applied to the 1-nm film due to the insulating behavior. The lower TCT_{\mathrm{C}} values in the thinner films can be attributed to the degradation of the exchange interaction in SRO. The degradation should come from disorders near the interface.

Temperature dependence of resistivity and magnetoresistance

Figure 2. (a) Temperature dependence of resistivity ρ\rho on thickness tt (=1–10 nm). Arrows indicate kinks. The inset in (a) shows data plotted with log scale for tt = 1 nm. (b) Thickness tt dependence of MR (ρ(B)−ρ(0 T))/ρ(0 T)(\rho(B)-\rho(0\ \mathrm{T}))/\rho(0\ \mathrm{T}) at 30 K with μ0H\mu_{0}H applied in the out-of-plane [110] direction of the TSO substrate.

We also performed magnetotransport measurements. Figure 2(b) shows the tt dependence of the magnetoresistance (MR) [(ρ(μ0H)−ρ(0 T))/ρ(0 T)\left(\rho(\mu_{0}H)-\rho(0\ \mathrm{T})\right)/\rho(0\ \mathrm{T})], where the magnetic field μ0H\mu_{0}H was applied in the out-of-plane [110] direction of the TSO substrate at 30 K. The SRO film with t=1t=1 nm could not be measured since ρ\rho at 30 K is larger than the measurement range of the DynaCool PPMS. For the SRO films with t=10t=10, 4, and 2 nm, negative anisotropic magnetoresistance (AMR),[42] which is proportional to the relative angle between the electric current and the magnetization, is clearly observed. This is in contrast to the positive AMR observed in compressive-strained SRO/STO films.[4, 22] According to the extended Campbell-Fert model, the negative AMR is not observed for majority spin conduction in ferromagnets; thus, the negative AMR observed here is thought to come from the minority spin conduction.[43] The AMR peak position, which corresponds to the coercive field HcH_{\mathrm{c}} of SRO,[11] becomes larger with decreasing tt. Since the magnetic domains tend to be pinned by grain boundaries and other defects, the large HcH_{\mathrm{c}} in thinner films also suggests poor crystalline quality near the interface. This result also supports the scenario that the disorders near the interface degrade the exchange interaction in SRO.

To get detailed insights into the thickness-dependent electronic structures and magnetic properties, we carried out XAS and XMCD measurements, which are tools sensitive to the element-specific electronic structure and magnetic properties.[31, 32, 33, 34] First, we show the thickness-dependent XAS and XMCD results taken in the in-plane configuration (θ=20∘\theta=20^\circ) [Figure 1(c)]. Figure 3(a)–Figure 3(c) shows XAS and XMCD spectra at the Ru M2,3M_{2,3} edge with t=10t=10, 2, and 1 nm, taken at θ=20∘\theta=20^\circ. For all the films, the Ru M3M_{3} and M2M_{2} XAS absorptions from the Ru 3p3/23p_{3/2} and 3p1/23p_{1/2} core levels into the Ru 4d4d states are observed at around 463 and 485 eV.[44, 45, 46] On the other hand, the Ru M3M_{3} and M2M_{2} XMCD absorption peaks are observed only at t=10t=10 and 2 nm, indicating that the SRO films with t=10t=10 and 2 nm are ferromagnetic at 30 K, while the SRO film with 1 nm is nonferromagnetic. Together with the magnetotransport, these results show a change from ferromagnetic metal to nonferromagnetic insulator between t=2t=2 and 1 nm. As shown in Figure 3(d)–Figure 3(f), the O KK-edge XAS and XMCD spectra represent the unoccupied electronic structures hybridized with the O 2p2p states and the O 2p2p orbital magnetic moments [Figure 3(d)–Figure 3(f)]. The absorption peak at 528.9 eV arises from the transition to the coherent part of the Ru 4d4d t2gt_{2g} states.[47] The spectra in the energy range of 529.5–531.5 eV correspond to the incoherent part of the Ru 4d4d t2gt_{2g} states, as reported by Takizawa et al.[47] and Okamoto et al.[44] As with the Ru M2,3M_{2,3} edge, the O KK-edge XMCD peaks, which represent the substantial orbital magnetic moments of the O 2p2p states, were observed only at ferromagnetic states at t=10t=10 and 2 nm and not at 1 nm. The Ru 4d4d t2gt_{2g} peak in the O KK-edge XMCD spectrum reveals a significant O 2p2p orbital magnetic moment due to a charge transfer from the O 2p2p states to the Ru 4d4d states. This suggests the formation of Ru 4d4d-O 2p2p spin-polarized bands at the Fermi level (EFE_{\mathrm{F}}).[11, 46]

Image not extracted

Figure 3. (a)–(c) XAS and XMCD spectra at the Ru M2,3M_{2,3} edge with tt = (a) 10, (b) 2, and (c) 1 nm at 30 K with a magnetic field μ0H\mu_0 H of 1.92 T at θ\theta = 20°. (d)–(f) XAS and XMCD spectra at the O KK edge with tt = (d) 10, (e) 2, and (f) 1 nm.

The large intensity of the coherent Ru 4d4d t2gt_{2g} peak at t=10t=10 nm indicates the high itinerancy and long lifetime of the hybridized Ru 4d4d t2gt_{2g}-O 2p2p states.[46, 48] To investigate the variation of the itinerancy of the hybridized state, we plotted the Ru 4d4d t2gt_{2g} peak intensity in the O KK-edge XAS spectrum normalized at 531 eV, which corresponds the absorption energy for the incoherent part of the Ru 4d4d t2gt_{2g} states, as a function of tt (blue triangles in Figure 4). In Figure 4, the data reported in Ref. 49 are also plotted for t=60t = 60 nm. The coherent peak exhibits reduced intensity as tt decreases, suggesting a decrease in the lifetimes of quasiparticles within the hybridized Ru 4d4d t2gt_{2g}-O 2p2p states. This decrease in intensity also indicates a strengthening of the localization of the hybridized states, attributed to disorders near the interface.[35, 36] The increased localization with decreasing tt is thought to be the origin of the insulating electrical properties observed in Figure 2(a). An increase in localization should result in lower hybridization strength between the Ru 4d4d t2gt_{2g} and O 2p2p states by shrinking the wave function. We also clarified the change in the magnetic moment accompanied by the weakening of the hybridization by evaluating the total magnetic moment (M=morb+mspinM = m_{\mathrm{orb}} + m_{\mathrm{spin}}) of Ru in the in-plane configuration (θ=20∘\theta= 20^\circ), M∥RuM_{\parallel}^{\mathrm{Ru}}, and the morbm_{\mathrm{orb}} of O in the in-plane configuration (θ=20∘\theta= 20^\circ), morb,∥Om_{\mathrm{orb},\parallel}^{\mathrm{O}}. According to the XMCD sum rules,[31] the integrated intensity of XMCD divided by that of XAS (XMCD/XAS integrated intensity) at the Ru M2M_2 edge is proportional to the total magnetic moment MM of Ru.[50] Therefore, the MM of Ru was evaluated by integrating the Ru M2M_2-edge XMCD/XAS intensity from 471 to 495 eV. Similarly, the morbm_{\mathrm{orb}} of O was evaluated by integrating the O KK-edge XMCD/XAS intensity[50, 51] from 527 to 531 eV, where finite O KK-edge XMCD intensity appears [Figure 3(d) and Figure 3(e)]. As shown in Figure 4, the M∥RuM_{\parallel}^{\mathrm{Ru}} (green circles) and morb,∥Om_{\mathrm{orb},\parallel}^{\mathrm{O}} (red circles) decrease with the decrease in the O KK-edge Ru 4d4d t2gt_{2g} peak intensity (blue triangles) as tt decreases from 60 to 2 nm. In Figure 4, the M∥RuM_{\parallel}^{\mathrm{Ru}} and morb,∥Om_{\mathrm{orb},\parallel}^{\mathrm{O}} values are normalized by those at t=60t = 60 nm to see the thickness dependence. This result means that the orbital magnetic moment of oxygen decreases as a result of reduced charge transfer through orbital hybridization and that the Ru 4d4d t2gt_{2g}-O 2p2p hybridization is important for the ferromagnetic ordering of Ru. When tt further decreases to 2 nm, the O KK-edge Ru 4d4d t2gt_{2g} peak intensity decreases to 0.27 times that of 60 nm, and the XMCD peak disappears at t=1t = 1 nm.

Image not extracted

Figure 4. Thickness dependence of the Ru 4d4d t2gt_{2g} peak in the O KK-edge XAS spectrum normalized at 531 eV, M∥RuM^{\mathrm{Ru}}_{\parallel}, and morb,∥om^{\mathrm{o}}_{\mathrm{orb},\parallel} at 30 K under a magnetic field μ0H\mu_{0}H of 1.92 T. The data reported in Ref. 49 are plotted for t=60t = 60 nm.

To examine how the magnetic anisotropy changes with tt, we also performed the XMCD measurements in the perpendicular (θ=90∘\theta= 90^\circ) configuration. Figure 5(a) and Figure 5(b) show the normalized XMCD spectra at the Ru M2,3M_{2,3} and O KK edges with t=10t = 10 and 2 nm at θ=90∘\theta= 90^\circ and θ=20∘\theta= 20^\circ. The morb/mspinm_{\mathrm{orb}}/m_{\mathrm{spin}} ratio of Ru is exclusively derived from the ratio of the XMCD absorption intensities at the Ru M3M_3 edge to M2M_2 edge, as dictated by the XMCD sum rules. The substantial overlap in the Ru M2,3M_{2,3}-edge spectra means that the Ru 4d4d states have a constant morb/mspinm_{\mathrm{orb}}/m_{\mathrm{spin}} of 0.081, as determined by the XMCD sum rules,[31] regardless of tt and θ\theta. Similarly, normalized O KK-edge XMCD spectra are identical to each other, meaning that the electronic structure contributing to the orbital magnetic moment of O, among the hybridized Ru 4d4d t2gt_{2g}-O 2p2p states, does not change with tt and θ\theta. Figure 5(c) shows XMCD-μ0H\mu_0H curves measured at the Ru M3M_3-edge with t=2t = 2 nm at 30 K for θ=90∘\theta= 90^\circ and θ=20∘\theta= 20^\circ. There is no large anisotropy, but the magnetic moment at 1.92 T and the remanent magnetization at 0 T are slightly larger in the in-plane configuration, indicating weak in-plane magnetic anisotropy for the SRO film with t=2t = 2 nm. To investigate more quantitatively the magnetic anisotropy in the SRO films with t>2t > 2 nm, we plotted the M∥Ru/M⊥RuM_{\parallel}^{\mathrm{Ru}}/M_{\perp}^{\mathrm{Ru}} and morb,∥O/morb,⊥Om_{\mathrm{orb},\parallel}^{\mathrm{O}}/m_{\mathrm{orb},\perp}^{\mathrm{O}} vs. tt at 30 K with a magnetic field μ0H\mu_0H of 1.92 T [Figure 5(d)]. In Figure 5(d), the data reported in Ref. 49 are also plotted for t=60t = 60 nm. Here, M⊥RuM_{\perp}^{\mathrm{Ru}} and morb,⊥Om_{\mathrm{orb},\perp}^{\mathrm{O}} are the total magnetic moment of Ru (M⊥Ru=morb,⊥Ru+mspin,⊥RuM_{\perp}^{\mathrm{Ru}} = m_{\mathrm{orb},\perp}^{\mathrm{Ru}} + m_{\mathrm{spin},\perp}^{\mathrm{Ru}}) at θ=90∘\theta= 90^\circ and the morbOm_{\mathrm{orb}}^{\mathrm{O}} at θ=90∘\theta= 90^\circ, respectively. The M∥Ru/M⊥RuM_{\parallel}^{\mathrm{Ru}}/M_{\perp}^{\mathrm{Ru}} and morb,∥O/morb,⊥Om_{\mathrm{orb},\parallel}^{\mathrm{O}}/m_{\mathrm{orb},\perp}^{\mathrm{O}} represent the magnetic anisotropy of Ru and O, respectively. A ratio larger than 1 indicates in-plane magnetic anisotropy. As reported in Ref. 49, at t=60t = 60 nm, both M∥Ru/M⊥RuM_{\parallel}^{\mathrm{Ru}}/M_{\perp}^{\mathrm{Ru}} and morb,∥O/morb,⊥Om_{\mathrm{orb},\parallel}^{\mathrm{O}}/m_{\mathrm{orb},\perp}^{\mathrm{O}} are 1.4, indicating the in-plane magnetic anisotropy with magnetic coupling between the Ru and O ions. In contrast, at t=2t = 2 and 10 nm, both M∥Ru/M⊥RuM_{\parallel}^{\mathrm{Ru}}/M_{\perp}^{\mathrm{Ru}} and morb,∥O/morb,⊥Om_{\mathrm{orb},\parallel}^{\mathrm{O}}/m_{\mathrm{orb},\perp}^{\mathrm{O}} are about 1.0–1.1 (almost isotropic), suggesting that the magnetic anisotropy is weakened by the presence of interface defects while Ru and O are still magnetically coupled. As reported in Ref. 50, in compressive-strained SRO/STO films, strong perpendicular magnetic anisotropy remained at t=10t = 10 nm, where the magnetic moment in the perpendicular direction was about 1.8 times larger than in-plane. This difference indicates that the ultrathin tensile-strained SRO is more suitable for use as a soft magnet.

Four-panel XMCD spectra, magnetic-field curves, and thickness dependence

Figure 5. (a),(b) Ru M2,3M_{2,3}-edge XMCD spectra normalized at 462.2 eV (a) and O KK-edge XMCD spectra normalized at 529.1 eV (b) with t=10t = 10 and 2 nm at θ=90∘\theta= 90^\circ and θ=20∘\theta= 20^\circ. (c) XMCD-μ0H\mu_0H curves measured at the Ru M3M_3-edge with t=2t = 2 nm at 30 K and θ=90∘\theta= 90^\circ and θ=20∘\theta= 20^\circ. (d) Thickness dependence of M∥Ru/M⊥RuM_{\parallel}^{\mathrm{Ru}}/M_{\perp}^{\mathrm{Ru}} and morb,∥o/morb,⊥om_{\mathrm{orb},\parallel}^{\mathrm{o}}/m_{\mathrm{orb},\perp}^{\mathrm{o}} at 30 K under a magnetic field μ0H\mu_0H of 1.92 T. In (d), the data reported in Ref. 49 are also plotted for t=60t = 60 nm.

Conclusion

Our systematic investigation using magnetotransport, XAS, and XMCD measurements has shed light on the interplay between thickness, strain, and electronic structure in tensile-strained SRO films. Decreasing film thickness tt reveals a progressive localization of the Ru 4d4d t2gt_{2g}-O 2p2p hybridized states, evidenced by the declining intensity of the coherent XAS peak. This localization, likely exacerbated by interfacial disorder, weakens the charge transfer-induced O 2p2p orbital moment and the Ru 4d4d magnetic moment, leading to a complete suppression of ferromagnetism at t=1t = 1 nm. Furthermore, the increasing localization coincides with the emergence of insulating behavior for t≤2t \le2 nm. Strikingly, even below t=10t = 10 nm, the in-plane magnetic anisotropy exhibits a pronounced reduction compared to thicker films, highlighting its sensitivity to the weakening of orbital hybridization under tensile strain. These findings offer valuable insights for engineering SRO-based electrodes in future electrical and spintronic devices. By carefully considering the delicate interplay between strain, thickness, and electronic structure, we can optimize SRO's behavior to achieve desired electrical and magnetic properties at the heterointerface, paving the way for innovative device architectures.

Acknowledgments

This work was partially supported by the Spintronics Research Network of Japan (Spin-RNJ). The experiment at SPring-8 was approved by the Japan Synchrotron Radiation Research Institute (JASRI) Proposal Review Committee (Proposal No. 2023B1441).

Conflict of Interest

The authors have no conflicts to disclose.

Authors' Contributions

Y. K. Wakabayashi: Conceptualization (lead); Validation (lead); Investigation (lead); Supervision (lead); Writing – Original Draft (lead); Writing – Review & editing (lead). M. Kobayashi: Investigation (supporting); Supervision (supporting); Writing – Review & editing (supporting). Y. Seki, K. Yamagami, T. Takeda, T. Ohkochi: Investigation (supporting); Writing – Review & editing (supporting). Y. Taniyasu: Writing – Review & editing (supporting). Y. Krockenberger: Investigation (supporting); Writing – Review & editing (supporting). H. Yamamoto: Writing – Review & editing (supporting).

Data Availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

Figures and figure captions

References

  1. [1]J. J. Randall, R. Ward, J. Am. Chem. Soc. 81, 2629 (1959).
  2. [2]L. Klein, J. S. Dodge, C. H. Ahn, J. W. Reiner, L. Mieville, T. H. Geballe, M. R. Beasley, A. Kapitulnik, J. Phys. Condens. Matter 8, 10111 (1996).
  3. [3]C. B. Eom, R. J. Cava, R. M. Fleming, J. M. Phillips, R. B. van Dover, J. H. Marshall, J. W. P. Hsu, J. J. Krajewski, W. F. Peck, Jr., Science 258, 1766 (1992).
  4. [4]G. Koster, L. Klein, W. Siemons, G. Rijnders, J. S. Dodge, C.-B. Eom, D. H. A. Blank, M. R. Beasley, Rev. Mod. Phys. 84, 253 (2012).
  5. [5]Y. K. Wakabayashi, Y. Krockenberger, T. Otsuka, H. Sawada, Y. Taniyasu, H. Yamamoto, Jpn. J. Appl. Phys. 62, SA0801 (2023).
  6. [6]D. Kan, M. Mizumaki, T. Nishimura, Y. Shimakawa, Phys. Rev. B 94, 214420 (2016).
  7. [7]D. E. Shai, C. Adamo, D. W. Shen, C. M. Brooks, J. W. Harter, E. J. Monkman, B. Burganov, D. G. Schlom, K.M. Shen, Phys. Rev. Lett. 110, 087004 (2013).
  8. [8]A. P. Mackenzie, J. W. Reiner, A. W. Tyler, L. M. Galvin, S. R. Julian, M. R. Beasley, T. H. Geballe, A. Kapitulnik, Phys. Rev. B 58, R13318 (1998).
  9. [9]Z. Li, S. Shen, Z. Tian, K. Hwangbo, M. Wang, Y. Wang, F. M. Bartram, L. He, Y. Lyu, Y. Dong, G. Wan, H. Li, N. Lu, J. Zang, H. Zhou, E. Arenholz, Q. He, L. Yang, W. Luo, P. Yu, Nat. Commun. 11, 184 (2020).
  10. [10]Y. Chen, D. L. Bergman, A. A. Burkov, Phys. Rev. B 88, 125110 (2013).
  11. [11]K. Takiguchi, Y. K. Wakabayashi, H. Irie, Y. Krockenberger, T. Otsuka, H. Sawada, S. A. Nikolaev, H. Das, M. Tanaka, Y. Taniyasu, H. Yamamoto, Nat. Commun. 11, 4969 (2020).
  12. [12]S. K. Takada, Y. K. Wakabayashi, Y. Krockenberger, T. Nomura, Y. Kohama, H. Irie, K. Takiguchi, S. Ohya, M. Tanaka, Y. Taniyasu, H. Yamamoto, npj Quantum Mater. 7, 102 (2022).
  13. [13]U. Kar, A. K. Singh, Y.-T. Hsu, C.-Y. Lin, B. Das, C.-T. Cheng, M. Berben, S. Yang, C.-Y. Lin, C.-H. Hsu, S. Wiedmann, W.-C. Lee, and W.-L. Lee, npj Quantum Mater. 8, 8 (2023).
  14. [14]W. Lin, L. Liu, Q. Liu, L. Li, X. Shu, C. Li, Q. Xie, P. Jiang, X. Zheng, R. Guo, Z. Lim, S. Zeng, G. Zhou, H. Wang, J. Zhou, P. Yang, Ariando, S. J. Pennycook, X. Xu, Z. Zhong, Z. Wang, J. Chen, Adv. Mater. 33, 2101316 (2021).
  15. [15]H. Boschker, T. Harada, T. Asaba, R. Ashoori, A. V. Boris, H. Hilgenkamp, C. R. Hughes, M. E. Holtz, L. Li, D. A. Muller, H. Nair, P. Reith, X. R. Wang, D. G. Schlom, A. Soukiassian, J. Mannhart, Phys. Rev. X 9, 011027 (2019).
  16. [16]K. S. Takahashi, A. Sawa, Y. Ishii, H. Akoh, M. Kawasaki, Y. Tokura, Phys. Rev. B 67, 094413 (2003).
  17. [17]L. Liu, Q. Qin, W. Lin, C. Li, Q. Xie, S. He, X. Shu, C. Zhou, Z. Lim, J. Yu, W. Lu, M. Li, X. Yan, S. J. Pennycook, J. Chen, Nat. Nanotechnol. 14, 939 (2019).
  18. [18]D. Toyota, I. Ohkubo, H. Kumigashira, M. Oshima, T. Ohnishi, M. Lippmaa, M. Takizawa, A. Fujimori, K. Ono, M. Kawasaki, H. Koinuma, Appl. Phys. Lett. 87, 162508 (2005).
  19. [19]Y. J. Chang, C. H. Kim, S.-H. Phark, Y. S. Kim, J. Yu, T. W. Noh, Phys. Rev. Lett. 103, 057201 (2009).
  20. [20]J. Xia, W. Siemons, G. Koster, M. R. Beasley, A. Kapitulnik, Phys. Rev. B 79, 140407(R) (2009).
  21. [21]X. Shen, X. Qiu, D. Su, S. Zhou, A. Li, D. Wu, J. Appl. Phys. 117, 015307 (2015).
  22. [22]S. K. Takada, Y. K. Wakabayashi, Y. Krockenberger, S. Ohya, M. Tanaka, Y. Taniyasu, H. Yamamoto, Appl. Phys. Lett. 118, 092408 (2021).
  23. [23]Q. Gan, R. A. Rao, C. B. Eom, J. L. Garrett, M. Lee, Appl. Phys. Lett. 72, 978 (1998).
  24. [24]C. U. Jung, H. Yamada, M. Kawasaki, Y. Tokura, Appl. Phys. Lett. 84, 2590 (2004).
  25. [25]A. T. Zayak, X. Huang, J. B. Neaton, K. M. Rabe, Phys. Rev. B 74, 094104 (2006).
  26. [26]D. Kan, R. Aso, H. Kurata, Y. Shimakawa, J. Appl. Phys. 113, 173912 (2013).
  27. [27]Y. K. Wakabayashi, S. K. Takada, Y. Krockenberger, Y. Taniyasu, H. Yamamoto, ACS Applied Electronic Materials 3, 2712 (2021).
  28. [28]Y. K. Wakabayashi, T. Otsuka, Y. Krockenberger, H. Sawada, Y. Taniyasu, H. Yamamoto, APL Mater. 7, 101114 (2019).
  29. [29]Y. K. Wakabayashi, T. Otsuka, Y. Krockenberger, H. Sawada, Y. Taniyasu, H. Yamamoto, npj Comput. Mater. 8, 180 (2022).
  30. [30]Y. K. Wakabayashi, T. Otsuka, Y. Krockenberger, H. Sawada, Y. Taniyasu, H. Yamamoto, APL Machine Learning 1, 026104 (2023).
  31. [31]B. T. Thole, P. Carra, F. Sette, G. van der Laan, Phys. Rev. Lett. 68, 1943 (1992).
  32. [32]C. T. Chen, Y. U. Idzerda, H. -J. Lin, N. V. Smith, G. Meigs, E. Chaban, G. H. Ho, E. Pellegrin, F. Sette, Phys. Rev. Lett. 75, 152 (1995).
  33. [33]J. Stohr, H. Konig, Phys. Rev. Lett. 75, 3748 (1995).
  34. [34]Y. K. Wakabayashi, Y. Nonaka, Y. Takeda, S. Sakamoto, K. Ikeda, Z. Chi, G. Shibata, A. Tanaka, Y. Saitoh, H. Yamagami, M. Tanaka, A. Fujimori, R. Nakane, Phys. Rev. B 96, 104410 (2017).
  35. [35]Y. K. Wakabayashi, S. K. Takada, Y. Krockenberger, K. Takiguchi, S. Ohya, M. Tanaka, Y. Taniyasu, H. Yamamoto, AIP advances 11, 035226 (2021).
  36. [36]S. K. Takada, Y. K. Wakabayashi, Y. Krockenberger, H. Irie, S. Ohya, M. Tanaka, Y. Taniyasu, H. Yamamoto, Phys. Rev. Mater. 7, 054406 (2023).
  37. [37]J. Snoek, H. Larochelle, R. P. Adams, paper presented at Advances in Neural Information Processing Systems 2012, http://papers.nips.cc/paper/4522-practical-bayesian-optimization.
  38. [38]Y. K. Wakabayashi, Y. Krockenberger, N. Tsujimoto, T. Boykin, S. Tsuneyuki, Y. Taniyasu, H. Yamamoto, Nat. Commun. 10, 535 (2019).
  39. [39]Y. Senba, H. Ohashi, Y. Kotani, T. Nakamura, T. Muro, T. Ohkochi, N. Tsuji, H. Kishimoto, T. Miura, M. Tanaka, M. Higashiyama, S. Takahashi, Y. Ishizawa, T. Matsushita, Y. Furukawa, T. Ohata, N. Nariyama, K. Takeshita, T. Kinoshita, A. Fujiwara, M. Takata, S. Goto, AIP Conf. Proc. 1741, 030044 (2016).
  40. [40]T. Nakamura, T. Muro, F. Z. Guo, T. Matsushita, T. Wakita, T. Hirono, Y. Takeuchi, K. Kobayashi, J. Electron Spectrosc. Relat. Phenom. 144-147, 1035 (2005).
  41. [41]A. Rastogi, M. Brahlek, J. M. Ok, Z. Liao, C. Sohn, S. Feldman, H. N. Lee, APL Mater. 7, 091106 (2019).
  42. [42]D. B. Kacedon, R. A. Rao, C. B. Eom, Appl. Phys. Lett. 71, 1724 (1997).
  43. [43]M. Tsunoda, Y. Komasaki, S. Kokado, S. Isogami, C. C. Chen, M. Takahashi, Appl. Phys. Express 2, 083001 (2009).
  44. [44]J. Okamoto, T. Okane, Y. Saitoh, K. Terai, S.-I. Fujimori, Y. Muramatsu, K. Yoshii,1 K. Mamiya, T. Koide, A. Fujimori, Z. Fang, Y. Takeda, M. Takano, Phys. Rev. B 76, 184441 (2007).
  45. [45]K. Terai, K. Yoshii, Y. Takeda, S. I. Fujimori, Y. Saitoh, K. Ohwada, T. Inami, T. Okane, M. Arita, K. Shimada, H. Namatame, M. Taniguchi, K. Kobayashi, M. Kobayashi, A. Fujimori, Phys. Rev. B 77, 115128 (2008).
  46. [46]Y. K. Wakabayashi, M. Kobayashi, Y. Takeda, K. Takiguchi, H. Irie, S.-i. Fujimori, T. Takeda, R. Okano, Y. Krockenberger, Y. Taniyasu, H. Yamamoto, Phys. Rev. Mater. 5, 124403 (2021).
  47. [47]47M. Takizawa, D. Toyota, H. Wadati, A. Chikamatsu, H. Kumigashira, A. Fujimori, M. Oshima, Z. Fang, M. Lippmaa, M. Kawasaki, H. Koinuma, Phys. Rev. B 72, 060404(R) (2005).
  48. [48]48H. Jeong, S. G. Jeong, A. Y. Mohamed, M. Lee, W. Noh, Y. Kim, J. S. Bae, W. S. Choi, D. Y. Cho, Appl. Phys. Lett. 115, 092906 (2019).
  49. [50]50Y. K. Wakabayashi, M. Kobayashi, Y. Seki, Y. Kotani, T. Ohkouchi, K. Yamagami, M. Kitamura, Y. Taniyasu, Y. Krockenberger, H. Yamamoto, arXiv 2309.05228 (2023).arxiv.org/abs/2309.05228
  50. [51]51J. Igarashi, K. Hirai, Phys. Rev. B 53, 6442 (1996).

Paper details

vlnc:W_pqr2ba4f
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 3

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents