betaFeedback

WorksMathematics

Structure-Preserving Integrators for Locally Conformally Symplectic Systems: Variational Methods and Globalization

Abstract

Locally conformally symplectic (LCS) manifolds are characterized by a nondegenerate two-form ΩΩ satisfying dΩ=φ∧Ω\mathrm{d}Ω=φ\wedgeΩ, where φφ is a closed one-form, called the Lee form. Although an LCS structure is locally conformal to an ordinary symplectic structure, the local symplectic descriptions need not arise from a single global symplectic form. This creates a natural local-to-global problem for geometric numerical integration: local symplectic discretizations must be compatible on chart overlaps in order to determine a globally defined numerical dynamics. We develop a Hamiltonian variational framework for the construction and globalization of structure-preserving integrators for LCS systems. The continuous theory is first recalled in a form adapted to a Type~II Hamiltonian variational principle. We then introduce exact and approximate discrete right Hamiltonians for the local symplectic representatives and identify the transformation law that they must satisfy on overlaps. This compatibility condition implies equivariance of the associated local discrete Hamiltonian maps and therefore provides a sufficient condition for their globalization. The resulting global discrete map preserves the LCS two-form conformally, with a discrete conformal factor determined by the local conformal potentials. The framework applies naturally to Type~II Hamiltonian variational integrators and, in the cotangent-type setting considered here, to symplectic Runge–Kutta methods. In particular, Gauss–Legendre methods and the implicit midpoint rule yield globally compatible LCS structure-preserving schemes. Under suitable regularity assumptions, the corresponding Lagrangian formulation is recovered through discrete Legendre transformations. Numerical examples illustrate overlap compatibility, chart switching, convergence, and discrete conformal preservation.

Introduction

Geometric numerical integration is concerned with the construction of numerical methods that reproduce, at the discrete level, geometric properties of the differential equations being approximated. In Hamiltonian mechanics, the central example is provided by symplectic integrators, which preserve the symplectic structure of phase space and typically exhibit favorable long-time behavior that is not shared by generic numerical schemes. We refer to [7, 22, 35, 37] for more details about structure-preserving integration techniques. Variational integrators provide a closely related construction based on a discretization of Hamilton’s principle [13, 18, 31], while Hamiltonian variational integrators arise from discrete Hamiltonian variational principles and generating functions [14, 24, 27].

Locally conformally symplectic geometry provides a natural extension of the symplectic setting. An LCS manifold is a triple (M,Ω,φ)(M, \Omega, \varphi) consisting of a smooth manifold MM, a nondegenerate two-form Ω\Omega, and a closed one-form φ\varphi, called the Lee form, satisfying

dΩ=φ∧Ω.(1)\mathrm{d}\Omega= \varphi\wedge\Omega. \tag*{(1)}

Since φ\varphi is closed, it is locally exact, φ∣Uα=dσα\left.\varphi\right|_{U_\alpha} = \mathrm{d}\sigma_\alpha on a suitable open covering {Uα}α∈A\{U_\alpha\}_{\alpha\in A} of MM, and Ωα=e−σαΩ∣Uα\Omega_\alpha= e^{-\sigma_\alpha}\left.\Omega\right|_{U_\alpha} is closed and nondegenerate, i.e., an ordinary symplectic form on UαU_\alpha. For more details on LCS manifolds, see [4, 5, 25, 43]. Hamilton–Jacobi theory in this setting has been developed in [15].

This local symplectic description suggests an apparently simple strategy for numerical integration: construct a symplectic integrator in each local symplectic representation and then reconstruct a numerical method for the original LCS system. The essential difficulty, however, is global. A collection of locally defined symplectic numerical maps does not, by itself, determine a global discrete dynamics. The local maps must agree on overlaps after the corresponding changes of representation are taken into account. Indeed, on a connected component of an overlap Uα∩UβU_\alpha\cap U_\beta the potentials differ by a constant, σα−σβ=Cαβ\sigma_\alpha- \sigma_\beta= C_{\alpha\beta}, so that Ωβ=cαβΩα\Omega_\beta= c_{\alpha\beta}\Omega_\alpha with cαβ=eCαβc_{\alpha\beta} = e^{C_{\alpha\beta}}, and the numerical constructions performed in the two local symplectic representations must be compatible with this overlap structure.

The purpose of the present work is to formulate this compatibility problem at the level of discrete Hamiltonian mechanics and to provide conditions under which local structure-preserving discretizations globalize to a well-defined LCS numerical dynamics. Our starting point is Hamiltonian rather than Lagrangian. This choice is important because the Hamiltonian formulation does not require the hyperregularity assumptions needed to pass between Hamiltonian and Lagrangian descriptions. We first recall the continuous LCS Hamiltonian theory and formulate its local canonical dynamics through a Type II Hamiltonian variational principle [27, 39]; this continuous material fixes the geometric and variational notation used in the discrete construction.

The discrete theory begins with the exact discrete right Hamiltonian, the Type II generating function of the exact time-hh flow of a local Hamiltonian representative HαH_\alpha. Replacing it by a computable approximation produces a local discrete Hamiltonian map which, as in ordinary discrete Hamiltonian mechanics, is symplectic in the local canonical variables. Local symplecticity, however, does not solve the globalization problem: the question is whether the discrete constructions obtained in two overlapping local representations describe the same numerical trajectory. In the cotangent-type local representation considered in this paper, we first consider overlap transformations of the form

Tαβ(q,r)=(q,cαβr).(2)T_{\alpha\beta}(q,r) = (q,c_{\alpha\beta}r). \tag*{(2)}

We show that the exact discrete right Hamiltonians satisfy a definite transformation law under this map. This motivates the corresponding compatibility condition for approximate discrete Hamiltonians,

Hβ,hd+(q,s)=cαβHα,hd+(q,cαβ−1s),(3)H_{\beta,h}^{d+}(q,s)=c_{\alpha\beta}H_{\alpha,h}^{d+}\left(q,c_{\alpha\beta}^{-1}s\right), \tag*{(3)}

which is a condition on the discrete generating functions themselves, rather than an a priori assumption on the resulting numerical maps. Under (3) the local discrete maps satisfy the equivariance relation Fβ,h∘Tαβ=Tαβ∘Fα,hF_{\beta,h}\circ T_{\alpha\beta}=T_{\alpha\beta}\circ F_{\alpha,h}, which is precisely the commutativity condition required for the local maps to glue, and after reconstruction in the original LCS variables the resulting global map FhF_h satisfies the discrete conformal preservation law

Fh∗Ω=eσα∘Fh−σαΩ,(4)F_h^*\Omega=e^{\sigma_\alpha\circ F_h-\sigma_\alpha}\Omega, \tag*{(4)}

which reproduces the characteristic conformal preservation property of the continuous LCS Hamiltonian flow. Symplecticity is thus a local geometric property of the numerical method, whereas equivariance is the compatibility property that allows those local methods to represent a single global dynamics; the globalization statement itself is straightforward once equivariance is known, and the substantive issue is to identify verifiable conditions on the discretization that guarantee it. The Type II framework provides such conditions naturally [27]: Galerkin approximations of the Hamiltonian action can be constructed so as to inherit the required scaling law. Moreover, because the transition maps (2) are linear, standard Runge–Kutta discretizations are equivariant when the same tableau is used in every local representation, and if the method is additionally symplectic the resulting global method is an LCS structure-preserving integrator. This includes the Gauss–Legendre family and, as its simplest member, the implicit midpoint rule [22, 31]. The restriction to the cotangent-type setting is relevant here: for general nonlinear coordinate transformations, Runge–Kutta methods are not automatically equivariant, and we therefore formulate the principal results under explicit hypotheses on the local symplectic representations and their transition maps rather than claiming coordinate invariance for arbitrary LCS Darboux charts. Once the Hamiltonian theory has been established, a Lagrangian counterpart can be obtained under appropriate regularity assumptions, see [1, 30, 31]; in this sense the Lagrangian formulation is complementary to, rather than logically prior to, the Hamiltonian globalization result.

The framework also extends to affine cotangent transitions

Tαβ(q,r)=(Bq+b,cαβB−Tr),T_{\alpha\beta}(q,r)=\left(Bq+b,c_{\alpha\beta}B^{-\mathsf T}r\right),

where BB is constant and invertible, bb is constant, and cαβ>0c_{\alpha\beta}>0 is constant on each connected overlap component. We derive the associated Type II transformation law, including the endpoint term arising from the translation, and verify the equivariance of Runge–Kutta methods under these transitions.

We also clarify the distinction between the LCS Hamiltonian framework and the conformal Hamiltonian systems studied in [32], for which conformally symplectic integrators have been developed, for example, in [6, 19]. For Hamiltonian systems with constant damping rate γ\gamma, the exact flow satisfies ψt∗ω=e−γtω\psi_t^*\omega=e^{-\gamma t}\omega, where ω\omega is a closed symplectic form, and conformally symplectic integrators reproduce the corresponding discrete scaling law. In contrast, the flow of an LCS Hamiltonian system satisfies

ψt∗Ω=ρtΩ,ρt(z)=exp⁡(∫0tφ(ξH)(ψs(z)) ds),\psi_t^*\Omega=\rho_t\Omega,\qquad\rho_t(z)=\exp\left(\int_0^t\varphi(\xi_H)(\psi_s(z))\,\mathrm{d}s\right),

so that the conformal factor generally depends on the initial point, rather than being determined solely by a constant damping rate. Even when the Lee form is exact, φ=dσ\varphi=\mathrm{d}\sigma, one obtains ρt=eσ∘ψt−σ\rho_t=e^{\sigma\circ\psi_t-\sigma}, which does not in general equal e−γte^{-\gamma t}; in this exact case, the flow preserves the globally defined symplectic form e−σΩe^{-\sigma}\Omega. Our discrete construction preserves the corresponding geometric relation Fh∗Ω=eσ∘Fh−σΩF_h^*\Omega=e^{\sigma\circ F_h-\sigma}\Omega for steps represented within a single chart. When the Lee form is non-exact, the conformal potentials are available only locally, and compatibility on chart overlaps is required. Our contribution is to construct compatible local symplectic integrators that define a global LCS structure-preserving method.

The results presented here build on the discrete locally conformal framework developed in [16]. While that work derives the discrete LCS Hamiltonian equations, we recover these equations by applying a Type II Hamiltonian variational principle in each local chart and expressing the resulting discrete Hamilton equations in LCS coordinates. Our contributions include this direct Hamiltonian variational derivation and the construction of globally defined integrators through compatibility conditions for local symplectic integrators on chart overlaps. We formulate and verify these conditions and provide numerical examples illustrating convergence, preservation of the LCS conformal scaling law, and consistency under chart switching.

The paper is organized as follows. § 2 recalls the continuous LCS Hamiltonian geometry and develops the Type II variational formulation required in the sequel. § 3 introduces exact and approximate discrete right Hamiltonians and the associated local symplectic maps. § 4 derives the overlap transformation law of the exact discrete right Hamiltonian, introduces the compatibility condition for approximate discrete right Hamiltonians, shows that it implies equivariance of the local discrete maps, and establishes the globalization and discrete LCS preservation results. § 5 identifies concrete classes of compatible methods, including Type II variational constructions and symplectic Runge–Kutta methods, and extends the relevant results to affine base transitions. § 7 recovers the corresponding discrete Lagrangian formulation under regularity assumptions. § 8 investigates the resulting methods numerically through convergence, overlap-consistency, chart-switching, and structure-preservation tests, and § 9 summarizes the results and discusses an open problem.

Continuous LCS Hamiltonian mechanics and variational formulation

In this section, we recall the continuous geometric framework underlying the discrete constructions developed later in the paper. Locally conformally symplectic geometry and the corresponding Hamiltonian and Lagrangian dynamics have been extensively studied in the literature [4, 5, 15, 25, 28, 43]; the purpose of this section is not to develop a new continuous theory, but to collect the ingredients that will be needed for the Hamiltonian discretization and globalization problem. The Hamiltonian viewpoint will be primary throughout the paper, and no hyperregularity assumption is required at this stage; the Lagrangian description is developed, under appropriate regularity assumptions, in § 7.

Locally conformally symplectic manifolds.

Definition 2.1. A locally conformally symplectic manifold is a triple (M,Ω,φ)(M,\Omega,\varphi), where MM is a smooth even-dimensional manifold, Ω∈Ω2(M)\Omega\in\Omega^2(M) is a nondegenerate two-form, and φ∈Ω1(M)\varphi\in\Omega^1(M) is a closed one-form such that

dΩ=φ∧Ω.(5)\mathrm{d}\Omega=\varphi\wedge\Omega. \tag*{(5)}

The one-form φ\varphi is called the Lee form.4

For the closed one-form φ\varphi, the associated Lichnerowicz–de Rham differential (see [20]) is defined by

dφ:=d−φ∧.(6)d_{\varphi} := d-\varphi\wedge. \tag*{(6)}

Since dφ=0d_{\varphi}=0, one has dφ2=0d_{\varphi}^{2}=0, and the LCS condition (5) is equivalently written as dφΩ=0d_{\varphi}\Omega=0.

The terminology “locally conformally symplectic” follows from the local exactness of the Lee form. Let {Uα}α∈A\{U_{\alpha}\}_{\alpha\in A} be an open covering of MM such that φ∣Uα=dσα\left.\varphi\right|_{U_{\alpha}}=d\sigma_{\alpha} for smooth functions σα:Uα→R\sigma_{\alpha}:U_{\alpha}\to\mathbb{R}, and define

Ωα:=e−σαΩ∣Uα,equivalentlyΩ∣Uα=eσαΩα.(7)\Omega_{\alpha}:=e^{-\sigma_{\alpha}}\left.\Omega\right|_{U_{\alpha}},\qquad\text{equivalently}\qquad\left.\Omega\right|_{U_{\alpha}}=e^{\sigma_{\alpha}}\Omega_{\alpha}. \tag*{(7)}

Then dΩα=e−σα(−dσα∧Ω+dΩ)=0d\Omega_{\alpha}=e^{-\sigma_{\alpha}}(-d\sigma_{\alpha}\wedge\Omega+d\Omega)=0 by (5), and Ωα\Omega_{\alpha} is nondegenerate since Ω\Omega is, so that (Uα,Ωα)(U_{\alpha},\Omega_{\alpha}) is a symplectic manifold. If the Lee form is globally exact, φ=dσ\varphi=d\sigma, then e−σΩe^{-\sigma}\Omega is a globally defined symplectic form and the LCS structure is said to be globally conformally symplectic. The distinction between local and global exactness of the Lee form is one of the geometric reasons why compatibility between local descriptions is important.

Overlap relations and the conformal cocycle. On each connected component of an overlap Uα∩UβU_{\alpha}\cap U_{\beta}, the local representatives of the globally defined Lee form agree, dσα=dσβd\sigma_{\alpha}=d\sigma_{\beta}, so that

σα−σβ=Cαβ,cαβ:=eCαβ>0,Ωβ=cαβΩα,(8)\sigma_{\alpha}-\sigma_{\beta}=C_{\alpha\beta},\qquad c_{\alpha\beta}:=e^{C_{\alpha\beta}}>0,\qquad\Omega_{\beta}=c_{\alpha\beta}\Omega_{\alpha}, \tag*{(8)}

where Cαβ∈RC_{\alpha\beta}\in\mathbb{R} is constant and the last identity follows from eσαΩα=eσβΩβe^{\sigma_{\alpha}}\Omega_{\alpha}=e^{\sigma_{\beta}}\Omega_{\beta} on the overlap. On a triple overlap the constants satisfy Cαβ+Cβγ=CαγC_{\alpha\beta}+C_{\beta\gamma}=C_{\alpha\gamma}, which implies

cαβcβγ=cαγ.(9)c_{\alpha\beta}c_{\beta\gamma}=c_{\alpha\gamma}. \tag*{(9)}

Thus, the constants cαβc_{\alpha\beta} define a multiplicative conformal cocycle relating the local symplectic representatives.

LCS Hamiltonian dynamics. Consider a smooth Hamiltonian function H:M→RH:M\to\mathbb{R}. The LCS Hamiltonian vector field ξH\xi_H is defined intrinsically by

ιξHΩ=dφH=dH−Hφ,(10)\iota_{\xi_H}\Omega=d_{\varphi}H=dH-H\varphi, \tag*{(10)}

which determines ξH\xi_H uniquely since Ω\Omega is nondegenerate. On the local chart UαU_{\alpha}, define the local Hamiltonian function

Hα:=e−σαH∣Uα.(11)H_{\alpha}:=e^{-\sigma_{\alpha}}\left.H\right|_{U_{\alpha}}. \tag*{(11)}

References

  1. [1]R. Abraham and J. E. Marsden. Foundations of Mechanics. Benjamin/Cummings, Reading, MA, 2nd edition, 1978.
  2. [2]A. Anahory Simoes, D. Martín de Diego, M. Lainz, and M. de León. On the geometry of discrete contact mechanics. J. Nonlinear Sci., 31(3):Paper No. 53, 2021.DOI
  3. [3]J. Bajo, M. de León, and A. López-Gordón. Geometric integrators for adiabatically closed simple thermodynamic systems. J. Phys. A, 59(6):Paper No. 065202, 2026.DOI
  4. [4]A. Banyaga. Some properties of locally conformal symplectic structures. Comment. Math. Helv., 77(2):383–398, 2002.DOI
  5. [5]G. Bazzoni. Locally conformally symplectic and Kähler geometry. EMS Surv. Math. Sci., 5(1-2):129–154, 2018.DOI
  6. [6]A. Bhatt, D. Floyd, and B. E. Moore. Second order conformal symplectic schemes for damped Hamiltonian systems. J. Sci. Comput., 66(3):1234–1259, 2016.DOI
  7. [7]S. Blanes and F. Casas. A Concise Introduction to Geometric Numerical Integration. Monographs and Research Notes in Mathematics. CRC Press, Boca Raton, FL, 2016.
  8. [8]A. Bravetti, M. Seri, M. Vermeeren, and F. Zadra. Numerical integration in celestial mechanics: a case for contact geometry. Celestial Mech. Dynam. Astronom., 132(1):Paper No. 7, 2020.DOI
  9. [9]A. Bravetti, M. Seri, and F. Zadra. New directions for contact integrators. In Geometric Science of Information (GSI 2021), pages 209–216. Springer, 2021.DOI
  10. [10]L. Colombo, M. Gamonal Fernández, and D. Martín de Diego. Variational integrators for non-autonomous Lagrangian systems. J. Comput. Appl. Math., 424:Paper No. 114966, 2023.DOI
  11. [11]M. de León and D. Martín de Diego. Variational integrators and time-dependent Lagrangian systems. Rep. Math. Phys., 49(2-3):183–192, 2002.arxiv.org/abs/math-ph/0201039
  12. [12]M. de León, D. Martín de Diego, and A. Santamaría-Merino. Discrete variational integrators and optimal control theory. Adv. Comput. Math., 26(1-3):251–268, 2007.
  13. [13]V. Duruisseaux and M. Leok. A variational formulation of accelerated optimization on Riemannian manifolds. SIAM J. Math. Data Sci., 4(2):649–674, 2022.arxiv.org/abs/2101.06552
  14. [14]V. Duruisseaux, J. M. Schmitt, and M. Leok. Adaptive Hamiltonian variational integrators and applications to symplectic accelerated optimization. SIAM J. Sci. Comput., 43(4):A2949–A2980, 2021.DOI
  15. [15]O. Esen, M. de León, C. Sardón, and M. Zajac. Hamilton–Jacobi formalism on locally conformally symplectic manifolds. J. Math. Phys., 62(3):Paper No. 033506, 2021.DOI
  16. [16]O. Esen, A. Gezici, and H. Gümral. Discrete dynamics on locally conformal framework. Proc. Inst. Math. Mech. Natl. Acad. Sci. Azerba., 50(1):133–151, 2024.arxiv.org/abs/2403.00312
  17. [17]O. Esen, A. Gezici, and H. Gümral. Variational aspect and kinetic theory of locally conformal dynamics. J. Phys. A, 57(36):365201, 2024.DOI
  18. [18]W. M. Farr. Variational integrators for almost-integrable systems. Celestial Mech. Dynam. Astronom., 103(2):105–118, 2009.DOI
  19. [19]G. França, J. Sulam, D. P. Robinson, and R. Vidal. Conformal symplectic and relativistic optimization. J. Stat. Mech. Theory Exp., 2020(12):124008, 2020.DOI
  20. [20]F. Guedira and A. Lichnerowicz. Géométrie des algèbres de Lie locales de Kirillov. J. Math. Pures Appl. (9), 63(4):407–484, 1984.
  21. [21]V. M. Guibout and A. M. Bloch. Discrete variational principles and Hamilton–Jacobi theory for mechanical systems and optimal control problems. arXiv preprint math/0409296, 2004.DOI
  22. [22]E. Hairer, C. Lubich, and G. Wanner. Geometric Numerical Integration: Structure-Preserving Algorithms for Ordinary Differential Equations, volume 31 of Springer Series in Computational Mathematics. Springer, Berlin, 2nd edition, 2006.
  23. [23]S. Haller and T. Rybicki. On the group of diffeomorphisms preserving a locally conformal symplectic structure. Ann. Global Anal. Geom., 17(5):475–502, 1999.DOI
  24. [24]S. Lall and M. West. Discrete variational Hamiltonian mechanics. J. Phys. A, 39(19):5509–5519, 2006.DOI
  25. [25]H.-C. Lee. A kind of even-dimensional differential geometry and its application to exterior calculus. Amer. J. Math., 65:433–438, 1943.DOI
  26. [26]T. Lee, M. Leok, and N. H. McClamroch. Lagrangian mechanics and variational integrators on two-spheres. Internat. J. Numer. Methods Engrg., 79(9):1147–1174, 2009.arxiv.org/abs/0707.0022
  27. [27]M. Leok and J. Zhang. Discrete Hamiltonian variational integrators. IMA J. Numer. Anal., 31(4):1497–1532, 2011.arxiv.org/abs/1001.1408
  28. [28]P. Libermann. Sur les structures presque complexes et autres structures infinitésimales régulières. Bull. Soc. Math. France, 83:195–224, 1955.DOI
  29. [29]J. C. Marrero, D. Martín de Diego, and E. Martínez. Discrete Lagrangian and Hamiltonian mechanics on Lie groupoids. Nonlinearity, 19(6):1313–1348, 2006.
  30. [30]J. E. Marsden and T. S. Ratiu. Introduction to Mechanics and Symmetry, volume 17 of Texts in Applied Mathematics. Springer-Verlag, New York, 2nd edition, 1999.
  31. [31]J. E. Marsden and M. West. Discrete mechanics and variational integrators. Acta Numer., 10:357–514, 2001.DOI
  32. [32]R. McLachlan and M. Perlmutter. Conformal Hamiltonian systems. J. Geom. Phys., 39(4):276–300, 2001.DOI
  33. [33]R. I. McLachlan, K. Modin, H. Munthe-Kaas, and O. Verdier. B-series methods are exactly the affine equivariant methods. Numer. Math., 133(3):599–622, 2016.DOI
  34. [34]A. Otiman. Locally conformally symplectic bundles. J. Symplectic Geom., 16(5):1377–1408, 2018.arxiv.org/abs/1510.02770
  35. [35]S. Reich. Symplectic integration of constrained Hamiltonian systems by composition methods. SIAM J. Numer. Anal., 33(2):475–491, 1996.DOI
  36. [36]S. Reich. Backward error analysis for numerical integrators. SIAM J. Numer. Anal., 36(5):1549–1570, 1999.DOI
  37. [37]J. M. Sanz-Serna. Symplectic integrators for Hamiltonian problems: an overview. Acta Numer., 1:243–286, 1992.
  38. [38]J. M. Sanz-Serna and M. P. Calvo. Numerical Hamiltonian Problems, volume 7 of Applied Mathematics and Mathematical Computation. Chapman and Hall, London, 1994.
  39. [39]J. M. Schmitt and M. Leok. Properties of Hamiltonian variational integrators. IMA J. Numer. Anal., 38(1):377–398, 2018.arxiv.org/abs/1609.02309
  40. [40]J. M. Schmitt, T. Shingel, and M. Leok. Lagrangian and Hamiltonian Taylor variational integrators. BIT, 58(2):457–488, 2018.arxiv.org/abs/1703.06599
  41. [41]Y. B. Suris. On the canonicity of mappings that can be generated by methods of Runge–Kutta type for integrating systems ẍ = −∂u/∂x. Zh. Vychisl. Mat. i Mat. Fiz., 29(2):202–211, 1989.DOI
  42. [42]Y. B. Suris. Hamiltonian methods of Runge–Kutta type and their variational interpretation. Mat. Model., 2(4):78–87, 1990.
  43. [43]I. Vaisman. Locally conformal symplectic manifolds. Internat. J. Math. Math. Sci., 8(3):521–536, 1985.DOI
  44. [44]M. Vermeeren, A. Bravetti, and M. Seri. Contact variational integrators. J. Phys. A, 52(44):445206, 2019.
  45. [45]J. M. Wendlandt and J. E. Marsden. Mechanical integrators derived from a discrete variational principle. Phys. D, 106(3-4):223–246, 1997.DOI

Paper details

vlnc:W_pu759a79
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 1

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents