betaFeedback

WorksPhysics and Astronomy

Detecting False Self-Consistency in Density-Functional Calculations

Abstract

Density-functional calculations feed materials databases and machine-learning models, and are declared converged when energy changes and residuals fall below thresholds. We show that these criteria, and even the agreement of independent optimizers, can accept a state from which the energy still descends or whose Hamiltonian is inconsistent with the energy. A variational formulation of self-consistency in the space of Kohn-Sham Hamiltonians yields a descent probe that exposes lower states accessible from a returned solution, and a frozen-orbital Janak test detects such an inconsistency. Both apply to any code without modification. In VASP, a UO2_2 PBE+UU calculation converges 1.46 eV above a lower state, and CoO and FeO converge as metals 0.8-0.9 eV above insulating states. In a census of 339 converged calculations on tungsten-free Materials Project structures, recomputed with a modified static protocol, 57 (16.8%) show energy decreases above the threshold, 49 without an initial energy rise exceeding the tolerance.

Introduction

Density-functional calculations [1, 2] are now routinely carried out in automated workflows, which produce materials databases and the training data of machine-learned models [3, 4, 5, 6]. The results of different codes agree at the level of meV [7] in comparisons with matched settings, but whether an individual calculation has reached an acceptable solution is rarely tested. A calculation is declared converged when successive energies agree and the residual of the density or potential is small. Neither criterion is sufficient: a stalled or oscillating iteration can fulfill both, and so can an unstable self-consistent solution or the self-consistent solution of a Hamiltonian that is not the derivative of the reported energy. The common practical safeguard, agreement between different algorithms, fails as well when the algorithms share the same Hamiltonian. For high-throughput data the consequence is not only an energy error: a falsely converged state can carry the wrong magnetic moment or the wrong band gap, and even the wrong sign of the gap, into every quantity and every model derived from it.

Three properties are at stake and must be distinguished. A state is self-consistent if its density and Hamiltonian satisfy the fixed-point condition of the Kohn-Sham equations. It is variationally stable if no descent of the implemented free energy is accessible from it within the tested variational space. A self-consistent state can be a saddle point. The Hamiltonian is consistent with the energy if it is the derivative of the implemented energy functional. Conventional stopping criteria can wrongly suggest any of the three. We use false self-consistency as an umbrella term for a calculation that is reported as converged but fails at least one of them, not only for states that violate the fixed-point equations.

Such failures occur in practice. A PBE+UU calculation of UO2\mathrm{UO}_{2} in VASP that reports convergence lies 1.46 eV above the state reached by a descent from its own orbitals (Figure 2). Under a static protocol derived from that of the Materials Project [3], CoO converges to a metal 0.79 eV above an insulating state with a gap of 1.40 eV. With a deliberately reintroduced Hamiltonian inconsistency, five independent optimizers agree on a state 7.5 meV too high [Figure 1c].

Figure 1. The two tests. a) C1, schematic: the free energy A(θ)\mathcal{A}(\theta) of the state induced by a trial Hamiltonian never falls below Amin⁡\mathcal{A}_{\min} (shaded: no admissible state). HM accepts only steps that do not raise A\mathcal{A}, whereas the energy reported for a mixed density (open circles) is not bounded. A returned state on a plateau or at an unstable stationary point can pass conventional criteria. The descent probe C1 restarts it variationally and exposes a remaining descent. b) C2, schematic: energy of frozen orbitals versus the occupation of one eigenstate. If the Hamiltonian is the derivative of the energy, the slope equals the eigenvalue ϵn\epsilon_n [Eq. (4)]. An inconsistent Hamiltonian reports a different eigenvalue, and Δn≠0\Delta_n \ne0. c) MgO with SCAN0r at the Γ\Gamma point: final energies of the optimizers, all of which report convergence, relative to the minimum of the correct code, and the outcome of C1 (largest decrease, meV) and C2 (largest ∣Δn∣|\Delta_n|, meV), with thresholds 10δ=0.2710\delta= 0.27 meV and 5 meV.

Figure 2. False convergence of UO2_2 with PBE+UU in VASP 6.4.2. Free energy relative to the end of the descent probe C1. Pulay mixing (grey, LMAXMIX=6, after a UU ramp) reports convergence (dotted line) with a band gap of 0.56 eV. C1, started from the same orbitals (blue, ALGO=All), lowers the free energy by 1.46 eV and opens the gap to 3.08 eV.

Here we show that a variational formulation of the self-consistency problem in the space of Hamiltonians, together with Janak’s theorem, provides two tests that can falsify such a result. They do not depend on the optimizer that produced the state, they distinguish a state from which a descent remains from a Hamiltonian that is inconsistent with the energy, and they apply to other codes without changes. We demonstrate them on controlled failures in our own code, on ff-electron oxides in VASP, on 22 targeted magnetic oxides computed with a database protocol, and on a census of 366 magnetic oxide structures from the Materials Project, which measures how often a calculation that reports convergence under this protocol retains a variational descent beyond its tolerance. We also state precisely what the tests cannot establish, and we give a recipe by which they can be added to an automated workflow, either as an early warning or as a full correction.

Results

Free energy as a function of the Hamiltonian

In the projector augmented-wave (PAW) method [8], the Kohn-Sham Hamiltonian H~[θ]=T^+H^0+∑αθαρ^α\widetilde{H}[\theta] = \widehat{T} + \widehat{H}_0 + \sum_\alpha\theta_\alpha\widehat{\rho}_\alpha, where T^\widehat{T} is the kinetic-energy operator and H^0\widehat{H}_0 contains the parameter-independent terms, is linear in the parameters θ=(v~(r),vτ(r),{ΔHR,ij})\theta= (\widetilde{v}(r), v_\tau(r), \{\Delta H_{R,ij}\}): the plane-wave potential, the potential of the kinetic-energy density and the one-center Hamiltonian of each atom RR. The operators ρ^α\widehat{\rho}_\alpha yield the conjugate densities ρ\rho. The eigenstates of each trial Hamiltonian, with Fermi occupations for NN electrons, define a state for which we evaluate the Mermin free energy [9]

A=EKS−TS,\mathcal{A} = E_{\mathrm{KS}} - TS,
A(θ)=Ω(θ)−θ⋅ρ(θ)+Epot[ρ(θ)].(1)\mathcal{A}(\theta) = \Omega(\theta) - \theta\cdot\rho(\theta) + E_{\mathrm{pot}}[\rho(\theta)]. \tag*{(1)}

Here Ω\Omega is the free energy of noninteracting electrons in H~[θ]\widetilde{H}[\theta] at fixed electron number NN, and EpotE_{\mathrm{pot}} contains the density-dependent contributions to the energy. Because A\mathcal{A} is the free energy of an admissible ensemble, every trial state provides an upper bound to Amin⁡\mathcal{A}_{\min}, the minimum of the implemented functional over the states representable with the same basis, PAW data sets, kk-point sampling and symmetry. It is not a bound to the exact free energy or to states outside this space. This remains true for approximate orbitals from an iterative eigensolver, provided they are orthonormal with respect to the PAW overlap operator. The gradient below assumes in addition that the orbitals are exact eigenstates of H~[θ]\widetilde{H}[\theta], that the occupations are smooth Fermi functions, so that Ω\Omega remains differentiable at degeneracies, and that EpotE_{\mathrm{pot}} depends on the state only through ρ\rho. The last condition holds for semilocal functionals, meta-GGAs and DFT+UU, but not for the Fock-type terms of hybrid functionals (Supplementary Note 1, which states the proposition and its assumptions). Since Ω\Omega is concave, with ∂Ω/∂θ=ρ\partial\Omega/\partial\theta= \rho[10],

∂A∂θ=χ(vout−θ),vout=∂Epot∂ρ,(2)\frac{\partial A}{\partial\theta} = \chi\left(v_{\mathrm{out}}-\theta\right), \qquad v_{\mathrm{out}} = \frac{\partial E_{\mathrm{pot}}}{\partial\rho}, \tag*{(2)}

where χ=∂2Ω/∂θ2\chi= \partial^{2}\Omega/\partial\theta^{2} is the symmetric, negative-semidefinite static response. The residual r=vout−θr = v_{\mathrm{out}}-\theta therefore satisfies

∂A∂θ⋅r=rTχr≤0,(3)\frac{\partial A}{\partial\theta}\cdot r = r^{T}\chi r \le0, \tag*{(3)}

so the residual is a non-ascent direction, and a strict descent direction when it has a component outside the null space of χ\chi. Besides the gauge mode below, null directions can arise, for example, from linearly dependent projector functions. Because χ\chi is semidefinite, rTχr=0r^{T}\chi r = 0 implies χr=0\chi r = 0, so that the whole gradient then vanishes: a residual in the null space of χ\chi, such as the gauge mode below, does not change the state to first order. The operator χ\chi never has to be constructed. Near the minimum θ∗\theta^{*}, r=−ε(θ−θ∗)r = -\varepsilon(\theta-\theta^{*}) with the dielectric operator ε=1−KHxcχ\varepsilon= 1-K_{\mathrm{Hxc}}\chi and the kernel KHxc=∂vout/∂ρK_{\mathrm{Hxc}} = \partial v_{\mathrm{out}}/\partial\rho, so that the Newton step is ε−1r\varepsilon^{-1}r. The inverse dielectric operator is thus the natural preconditioner in Hamiltonian space, and the Kerker filter$[11] G2/(G2+q02)G^{2}/(G^{2}+q_{0}^{2}), with G=∣G∣G = \lvert G\rvert and the screening wave vector q0q_{0}, is its Thomas-Fermi model (Supplementary Note 1).

Hamiltonian minimization (HM) minimizes A(θ)A(\theta) by Anderson steps$[12] along the preconditioned residual and accepts a step only if AA does not increase beyond the noise of the eigensolver [Fig. 1a]. Equation (3) concerns the residual itself. A preconditioned Anderson step is not guaranteed to descend, which is why every step is tested on the energy. The energy reported during density mixing, in contrast, is evaluated for a mixed density in the spirit of the Harris-Foulkes functional [13, 14]. Since the mixed density does not represent the state induced by a trial Hamiltonian, the resulting energy is not bounded by Amin⁡\mathcal{A}_{\min}. Related energy functions of the potential have been used to choose the damping of potential mixing [15, 16], where steps that raise the energy may still be accepted. In the PAW method a shift H~→H~+cO^\widetilde{H} \to\widetilde{H} + c\widehat{O} by the overlap operator leaves the state unchanged. This null direction is shared between the plane-wave and the one-center sectors and must be projected out of the residual. Otherwise, the sectors drift apart and the iteration stalls above the minimum (Supplementary Note 1). The implementation of HM and its validation are summarized in Methods.

Two tests

Both tests apply to the state returned by any optimizer. They are complementary rather than fully independent: C1 probes residual variational descent, whereas C2 probes the consistency between occupation derivatives of the implemented energy and the reported eigenvalues. Both rest on the implemented energy, so an implementation that is wrong but consistent can pass both.

C1: descent probe. The returned state is restarted with a variational optimizer, HM in VESPAW or direct minimization in other codes, and we report ΔAC1=Aend−Aret\Delta\mathcal{A}_{\mathrm{C1}} = \mathcal{A}_{\mathrm{end}} - \mathcal{A}_{\mathrm{ret}}. The reference Aret\mathcal{A}_{\mathrm{ret}} is the free energy of the state represented by the returned orbitals, evaluated in the first step of the probe, not the energy that a density-mixing code reports for an intermediate mixed density: only the former belongs to an admissible state and obeys the upper bound. A decrease beyond the tolerance demonstrates that the returned state is not the lowest state accessible to the probe, and it provides a tighter upper bound on Amin⁡A_{\min}, provided that both energies refer to the same implemented functional and numerical settings. If the decrease is continuous from the returned state, this is in addition evidence that the state is not a local minimum, within the directions and the resolution tested, either because it is not stationary or because it is an unstable stationary point. A trajectory with finite steps is not a complete stability analysis, and the evidence is strongest when the descent starts in the first steps of the probe. A lower end point alone does not establish this: an optimizer can cross a barrier and leave a metastable local minimum. We therefore also record whether the energy falls steadily, without a rise exceeding the numerical tolerance, from the returned state until the decrease exceeds the threshold. The converse is weaker: if the probe finds no decrease, the returned state is a minimum only within the tolerance, along the directions the probe explores, and for the Hamiltonian of the code, whose errors C1 inherits.

C2: frozen-orbital Janak test. C2 rests not on Hamiltonian minimization but on Janak’s theorem [17]: if the Hamiltonian is the functional derivative of the energy EE, the derivative of EE with respect to an eigenstate occupation, at fixed orbitals, equals its eigenvalue,

Δn=∂E∂fn∣ψ−ϵn=⟨ψn∣H^E−H~[θ]∣ψn⟩,(4)\Delta_n = \left.\frac{\partial E}{\partial f_n}\right|_{\psi} - \epsilon_n = \langle\psi_n | \hat{H}_E - \widetilde{H}[\theta] | \psi_n \rangle, \tag*{(4)}

where H^E\hat{H}_E is the functional derivative of the implemented energy and H~[θ]\widetilde{H}[\theta] the Hamiltonian whose eigenvalues are reported. The derivative is taken at fixed occupations of all other states and without the entropy term, which would add −T∂S/∂fn-T \partial S/\partial f_n. The orbitals are frozen because relaxing them after the occupation change would include the self-consistent response of the state. At fixed orbitals, Δn\Delta_n isolates the derivative of the implemented energy with respect to occupation. Because the orbitals are frozen, the identity holds for each state individually, also within a degenerate set, and for orbital-dependent terms such as Fock exchange and DFT+UU, provided ϵn\epsilon_n is the generalized Kohn-Sham eigenvalue of the Hamiltonian that the code uses. At a state that is not self-consistent, H^E−H~[θ]\hat{H}_E-\tilde{H}[\theta] also contains the residual, so that C2 responds to incomplete relaxation as well. The tests are therefore applied in sequence: C1 first, continued to its end point if it lowers the free energy, and C2 at that end point, where a remaining Δn\Delta_n indicates a Hamiltonian-energy inconsistency in the tested state rather than incomplete relaxation. The numerical procedure and the pass thresholds (10δ10\delta for C1, with δ\delta the energy tolerance per cell that the run claims to have met, and 5 meV for C2) are given in Methods.

C1 cannot detect a Hamiltonian-energy inconsistency because the probe shares the Hamiltonian, while C2 alone can miss incomplete relaxation in degrees of freedom that do not affect the tested frontier states. C2 is a differential test: it checks the Hamiltonian against the implemented energy, not the energy against the intended functional. Neither test can in general detect a functional that is implemented incorrectly but consistently with its derivative, and passing both does not establish that the state is the global minimum: on a nonconvex landscape, even a genuine local minimum need not be the lowest one.

Controlled failures

Two errors found during the development of VESPAW were reintroduced to test C1 and C2 on MgO with the local hybrid SCAN0r at the Γ\Gamma point (Figure 1 and Table 1), with the default tolerance δ=10−6\delta=10^{-6} Hartree (0.027 meV). In the first, the double-counting term of the onsite hybrid subtracted the kinetic-energy-density potential of the frozen core. The energy functional is unchanged, but the Hamiltonian is not its derivative. All five optimizers converge to the same wrong state. The descent probe passes: because it shares the Hamiltonian, C1 cannot detect this inconsistency. The Janak test fails by −92 and −190 meV for the lowest unoccupied and highest occupied states, compared with about 1 meV for the correct code.

In the second error, the density residual of the Pulay and Anderson mixers included Fourier components outside the cutoff sphere, which the Kerker filter never mixes. The residual stayed at a floor, the mixers stopped on the change of the energy, and Anderson mixing ended 29 meV above the minimum with an unrelaxed one-center density matrix. Its frontier orbitals are converged, so C2 passes, but C1 lowers the free energy by 29.45 meV in two accepted steps. With both errors removed, all optimizers end within 0.21 meV of the minimum and pass both tests. The two controlled failures are of opposite type, and each is caught by exactly one of the tests.

False convergence in another code

Both tests apply to VASP 6.4.2 [18, 19] without changes to the code (Table 1, procedure in Methods). For MgO, the Janak test passes for five functionals from PBE to the Fock hybrids, showing no Hamiltonian-energy inconsistency in the tested frontier states. For antiferromagnetic NiO, Pulay mixing with the default LMAXMIX=2 passes only the angular components up to L=2L = 2 of the one-center densities to the mixer and reports convergence with δ=10−7\delta= 10^{-7} eV. C1 nevertheless lowers the free energy of the returned orbitals by 30 μ\mueV, 300δ\delta, and with LMAXMIX=4 it passes.

The decrease is too small to matter physically, but it shows that the probe resolves, in another code, the signature of the residual floor in VESPAW: a consistent state from which a descent remains, not detected by the convergence criterion or the Janak test but detected by the descent probe.

A much larger C1 failure occurs for UO2\mathrm{UO}_2 (Figure 2). PBE+UU calculations of ff-electron oxides are known to end in metastable orbital states [20], and UU is commonly ramped up to steer the iteration. In an antiferromagnetic cell with 12 atoms, ramped from PBE to U−J=3.96U-J=3.96 eV with LMAXMIX=6, Pulay mixing reports convergence with tolerances from 10−410^{-4} to 10−710^{-7} eV, always at the same state, which is self-consistent according to the mixer. The descent probe, started from the same orbitals, lowers the free energy by 1.44 to 1.46 eV and ends in an insulating state with a gap of 3.08 eV instead of 0.56 eV. The first step of the descent changes the energy by only 0.5 μ\mueV, and the decrease then grows by six orders of magnitude within 11 steps. The returned state therefore suggests a nearly stationary, variationally unstable solution: a mixing scheme can come to rest there, whereas a variational descent departs. Damped electronic dynamics started from a recomputed returned state of the same kind departs in the same way for three time steps, whereas in NiO it decays (Supplementary Note 9). Residual and energy criteria cannot distinguish such a state from a minimum, but C1 can. The Janak test passes within 1 meV at the returned state and within 1.5 meV at the end point of C1: the returned state passes the consistency test, but is not a minimum. The error is not an artifact of the Γ\Gamma point: with a 2×2×22 \times2 \times2 kk-point mesh the same protocol reports convergence 0.21 eV above the end point of C1. The probe does not find the ground state. The probes from the three Γ\Gamma-point converged states end in two different minima, 24 meV apart, and a probe from random orbitals reaches a state at least 14 meV lower still.

The error need not be large to be systematic. For ferromagnetic Ce2_2O3_3 with one 4f4f electron per Ce and 20 atoms, the same protocol converges in 42 iterations with δ=10−7\delta= 10^{-7} eV. The descent probe lowers the free energy by 17.6 meV, more than 105δ10^{5}\delta, while the band gap stays at 2.5 eV: the occupied ff orbitals rotate slowly in a flat part of the landscape that the mixer does not resolve. At the returned state the Janak test fails as well, with 7 meV for the highest occupied state, because the state is not fully relaxed and C2 therefore contains a residual contribution. At the end point of the probe it passes within 1 meV. This illustrates why C2 is interpreted only after C1.

Targeted survey under a database protocol

Can such failures occur under a production database protocol? We took 22 magnetic oxides from the Materials Project [3], among them rocksalt, corundum, rutile, spinel and perovskite oxides and the cathode materials LiCoO2_2, LiNiO2_2, LiMn2_2O4_4 and LiFePO4_4, and recomputed them in their database structures with its static protocol [21, 22] (Methods). All 22 report convergence. Fifteen pass C1 within 2.1δ\delta, and seven fail (Table 2).

References

  1. [1]Hohenberg, P. & Kohn, W. Inhomogeneous electron gas. Phys. Rev. 136, B864 (1964). URL https://doi.org/10.1103/physrev.136.b864.
  2. [2]Kohn, W. & Sham, L. J. Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133 (1965). URL https://doi.org/10.1103/physrev.140.a1133.
  3. [3]Jain, A. et al. Commentary: The Materials Project: A materials genome approach to accelerating materials innovation. APL Mater. 1, 011002 (2013). URL https://doi.org/10.1063/1.4812323.
  4. [4]Curtarolo, S. et al. AFLOW: An automatic framework for high-throughput materials discovery. Comput. Mater. Sci. 58, 218–226 (2012). URL https://doi.org/10.1016/j.commatsci.2012.02.005.
  5. [5]Saal, J. E., Kirklin, S., Aykol, M., Meredig, B. & Wolverton, C. Materials Design and Discovery with High-Throughput Density Functional Theory: The Open Quantum Materials Database (OQMD). JOM 65, 1501–1509 (2013). URL https://doi.org/10.1007/s11837-013-0755-4.
  6. [6]Huber, S. P. et al. AiiDA 1.0, a scalable computational infrastructure for automated reproducible workflows and data provenance. Sci. Data 7, 300 (2020). URL https://doi.org/10.1038/s41597-020-00638-4.
  7. [7]Lejaeghere, K. et al. Reproducibility in density functional theory calculations of solids. Science 351, aad3000 (2016). URL https://doi.org/10.1126/science.aad3000.
  8. [8]Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953 (1994). URL https://doi.org/10.1103/PhysRevB.50.17953.
  9. [9]Mermin, N. D. Thermal properties of the inhomogeneous electron gas. Phys. Rev. 137, A1441 (1965). URL https://doi.org/10.1103/physrev.137.a1441.
  10. [10]Gonze, X. Towards a potential-based conjugate gradient algorithm for order-N self-consistent total energy calculations. Phys. Rev. B 54, 4383 (1996). URL https://doi.org/10.1103/PhysRevB.54.4383.
  11. [11]Kerker, G. P. Efficient iteration scheme for self-consistent pseudopotential calculations. Phys. Rev. B 23, 3082 (1981). URL https://doi.org/10.1103/PhysRevB.23.3082.
  12. [12]Anderson, D. G. Iterative procedures for nonlinear integral equations. J. ACM 12, 547 (1965). URL https://doi.org/10.1145/321296.321305.
  13. [13]Harris, J. Simplified method for calculating the energy of weakly interacting fragments. Phys. Rev. B 31, 1770 (1985). URL https://doi.org/10.1103/PhysRevB.31.1770.
  14. [14]Foulkes, W. M. C. & Haydock, R. Tight-binding models and density-functional theory. Phys. Rev. B 39, 12520 (1989). URL https://doi.org/10.1103/PhysRevB.39.12520.
  15. [15]Bendt, P. & Zunger, A. New approach for solving the density-functional self-consistent-field problem. Phys. Rev. B 26, 3114 (1982). URL https://doi.org/10.1103/PhysRevB.26.3114.
  16. [16]Herbst, M. F. & Levitt, A. A robust and efficient line search for self-consistent field iterations. J. Comput. Phys. 459, 111127 (2022). URL https://doi.org/10.1016/j.jcp.2022.111127.
  17. [17]Janak, J. F. Proof that ∂e/∂n_i = ε_i in density-functional theory. Phys. Rev. B 18, 7165 (1978). URL https://doi.org/10.1103/PhysRevB.18.7165.
  18. [18]Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169 (1996). URL https://doi.org/10.1103/PhysRevB.54.11169.
  19. [19]Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758 (1999). URL https://doi.org/10.1103/PhysRevB.59.1758.
  20. [20]Dorado, B., Amadon, B., Freyss, M. & Bertolus, M. DFT+U calculations of the ground state and metastable states of uranium dioxide. Phys. Rev. B 79, 235125 (2009).DOI
  21. [21]Ong, S. P. et al. Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis. Comput. Mater. Sci. 68, 314–319 (2013). URL https://doi.org/10.1016/j.commatsci.2012.10.028.
  22. [22]Jain, A. et al. Formation enthalpies by mixing GGA and GGA+U calculations. Phys. Rev. B 84, 045115 (2011). URL https://doi.org/10.1103/PhysRevB.84.045115.
  23. [23]Seeger, R. & Pople, J. A. Self-consistent molecular orbital methods. XVIII. Constraints and stability in Hartree-Fock theory. J. Chem. Phys. 66, 3045–3050 (1977).DOI
  24. [24]Bauernschmitt, R. & Ahlrichs, R. Stability analysis for solutions of the closed shell Kohn-Sham equation. J. Chem. Phys. 104, 9047–9052 (1996).DOI
  25. [25]Payne, M. C., Teter, M. P., Allan, D. C., Arias, T. A. & Joannopoulos, J. D. Iterative minimization techniques for ab initio total-energy calculations: molecular dynamics and conju- gate gradients. Rev. Mod. Phys. 64, 1045 (1992). URL https://doi.org/10.1103/revmodphys.64.1045.
  26. [26]Marzari, N., Vanderbilt, D. & Payne, M. C. Ensemble density-functional theory for ab initio molecular dynamics of metals and finite-temperature insulators. Phys. Rev. Lett. 79, 1337 (1997). URL https://doi.org/10.1103/PhysRevLett.79.1337.
  27. [27]Freysoldt, C., Boeck, S. & Neugebauer, J. Direct minimization technique for metals in density functional theory. Phys. Rev. B 79, 241103(R) (2009). URL https://doi.org/10.1103/PhysRevB.79.241103.
  28. [28]Cancès, E. & Le Bris, C. Can we outperform the DIIS approach for electronic structure calculations? Int. J. Quantum Chem. 79, 82 (2000). URL https://doi.org/10.1002/1097-461x(2000)79:2<82::aid-qua3>3.0.co;2-i.
  29. [29]Woods, N. D., Payne, M. C. & Hasnip, P. J. Computing the self-consistent field in Kohn-Sham density functional theory. J. Phys.: Condens. Matter 31, 453001 (2019). URL https://doi.org/10.1088/1361-648x/ab31c0.
  30. [30]Sotoudeh, M. VESPAW: variational electronic structure with projector augmented waves (2026). URL https://doi.org/10.5281/zenodo.23295633. Software, version 1.0.2.
  31. [31]Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1996). URL https://doi.org/10.1103/PhysRevLett.77.3865.
  32. [32]Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J. & Sutton, A. P. Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study. Phys. Rev. B 57, 1505 (1998). URL https://doi.org/10.1103/PhysRevB.57.1505.
  33. [33]Car, R. & Parrinello, M. Unified approach for molecular dynamics and density-functional theory. Phys. Rev. Lett. 55, 2471 (1985). URL https://doi.org/10.1103/PhysRevLett.55.2471.
  34. [34]Ong, S. P. et al. The Materials Application Programming Interface (API): A simple, flexible and efficient API for materials data based on REpresentational State Transfer (REST) principles. Comput. Mater. Sci. 97, 209–215 (2015). URL https://doi.org/10.1016/j.commatsci.2014.10.037.

Paper details

vlnc:W_pv2k2mez
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents