betaFeedback

WorksPhysics and Astronomy

Relativistic mean-field models of neutron-rich matter

Abstract

The aim of this chapter, focused on relativistic mean-field models and part of the Encyclopedia of Nuclear Physics, is to provide an introductory, self-contained discussion accessible to a broad audience, including advanced undergraduate students. The chapter surveys the fundamental ideas, assumptions, and theoretical framework underlying relativistic mean-field models, and illustrates their wide range of applications across nuclear science. Particular emphasis is placed on the central role that these models play in the construction of equations of state for strongly interacting matter, as well as on the intimate connections between nuclear experiments, astrophysical observations, and theoretical modeling. In this context, relativistic mean-field theory is shown to provide a unified description of bulk nuclear properties and dense neutron-rich matter, enabling the interpretation of the remarkable structural and observational properties of neutron stars in the emerging era of multi-messenger astronomy.

Key points

  • Theoretical Foundation: Relativistic mean-field (RMF) models utilize a framework where nucleons interact via the exchange of scalar and vector mesons.

  • Equation of State: A thermodynamic relation that quantifies how the pressure evolves as a function of the energy density. Relativistic mean-field models are critical for constructing equations of state to describe the structure of neutron stars.

  • Symmetry Energy: The nuclear symmetry energy quantifies the energy cost of converting symmetric nuclear matter into pure neutron matter—an essential component of describing neutron stars.

  • Nuclear Saturation: The models provide a natural explanation for the saturation of symmetric nuclear matter, which occurs due to the competition between intermediate-range scalar attraction and short-range vector repulsion.

  • Astrophysical Constraints: Modern RMF functionals are calibrated against both laboratory data and astrophysical observations, such as the monitoring of heavy pulsars and gravitational wave data.

  • Chemical Equilibrium: In neutron stars, the RMF framework incorporates charge neutrality and beta equilibrium, predicting a proton-to-neutron ratio that approaches 1/8 at high densities.

  • Neutron Stars: Neutron stars serve as astrophysical laboratories where theoretical models are tested at extreme densities and neutron-proton asymmetries. When coupled to the Tolman–Oppenheimer–Volkoff equations, these models yield predictions for neutron-star masses, radii, and tidal deformabilities that can be directly compared with modern multimessenger observations.

Introduction

Among the most compelling questions animating nuclear astrophysics today are: What novel states of matter emerge under conditions of extreme density and temperature? How were the heavy elements, from iron to uranium, forged in the cosmos? These—and many other fundamental questions—are addressed in the most recent Long Range Plans for Nuclear Science [39, 40]. Developed by the entire U.S. nuclear physics community, the long range plans chart a vision for the future and highlight the unparalleled breadth and depth of the field, spanning phenomena from the quark-gluon substructure of the nucleon to the microphysics of gigantic stellar explosions.

The exotic environments that shape nuclear astrophysics, from the synthesis of the heavy elements, to the composition of neutron stars, and to the cataclysmic mergers of binary neutron stars involve the presence of neutron-rich matter. Remarkably, in one clean sweep, the historical detection of gravitational waves from the binary neutron star merger GW170817 by the LIGO-Virgo collaboration [1] has provided critical insights into the nature of dense matter (Bauswein et al., 2017; Fattoyev et al., 2018; Annala et al., 2018; Abbott et al., 2018; Most et al., 2018; Tews et al., 2018; Malik et al., 2018; Radice et al., 2018; Radice and Dai, 2019; Tews et al., 2019; Capano et al., 2019; Tsang et al., 2019, 2020; Drischler et al., 2020; Landry et al., 2020; Xie and Li, 2021; Essick et al., 2021; Chatzioannou, 2022) as well as on the synthesis of the heavy elements in the cosmos [18, 15, 13, 38].

Combined with this historic discovery, long-term pulsar-timing observations have determined with high precision the mass of the millisecond pulsar PSR J0740+6620 [16, 23]. With a measured mass of M=2.08±0.07 M⊙M = 2.08 \pm0.07\,M_\odot, this compact object is currently among the most massive—and precisely measured—neutron stars known to date. By itself, this measurement already places stringent constraints on the equation of state, as it implies that the pressure support against gravitational collapse at the highest densities reached in the stellar interior must be sufficiently large to sustain such a massive star.

In turn, the Neutron Star Interior Composition Explorer (NICER) relies on pulse-profile modeling of X-ray emission from localized hot spots on the stellar surface to enable the simultaneous determination of neutron-star masses and radii. To date, among the sources that have been targeted are: PSR J0030+0451 [46, 35], the aforementioned millisecond pulsar PSR J0740+6620 [47, 36], and the brightest rotation-powered pulsar PSR J0437-4715 [14]. These pioneering observations—and future measurements with enhanced sensitivity—are of critical importance in the determination of the equation of state of neutron-star matter. Indeed, the simultaneous determination of masses and radii provides one of the most direct avenues for constraining the nuclear equation of state via the inverse stellar structure problem [31, 32].

With the goal of providing an introductory and self-contained overview of relativistic mean-field models of nuclear matter, this chapter is written for a broad readership that includes both undergraduate and graduate students. The presentation emphasizes relativistic mean-field theory as a foundational framework for understanding the nuclear equation of state and its wide-ranging applications in nuclear physics and astrophysics, particularly in the description of neutron-star matter. To this end, the formal development begins with a discussion of the basic concepts underlying the equation of state, introduced in the simplified setting of relativistic free Fermi gases. In this context, a one-component Fermi gas is examined in detail, with all important results presented in closed analytic form. Recognizing that nuclear systems are composed of both neutrons and protons, the formalism is then extended to two-component systems, leading naturally to the introduction of the nuclear symmetry energy. The discussion is further generalized to incorporate the conditions of charge neutrality and chemical equilibrium that are essential for describing neutron-star matter. With all these key concepts in place, the relativistic Walecka model is introduced to illustrate how fundamental nuclear properties—such as saturation of symmetric nuclear matter—emerge naturally from the relativistic structure of the theory. Finally, representative modern extensions of the Walecka model are discussed as examples of modern energy-density functionals calibrated, with quantified theoretical uncertainties, to a broad set of laboratory and astrophysical observables.

Formalism

Before venturing into the nuclear domain—where strong interactions are essential to unravel the complex dynamics of nuclear matter—we first introduce a simple “toy model” that illustrates the critical role of quantum mechanics in shaping the equation of state of a free Fermi gas. A free Fermi gas is an idealized collection of identical fermions that do not interact with one another. In the quantum regime relevant to such systems, the temperature is low and the density is high. Hence, the only form of “communication” between fermions arises from the Pauli exclusion principle. That is, the occupation of a single-particle state with energy ε(k)\varepsilon(k) is governed by the Fermi-Dirac distribution:

n(ε)=11+eβ(ε−μ)(1)n(\varepsilon) = \frac{1}{1+e^{\beta(\varepsilon-\mu)}} \tag*{(1)}

where ε(k)\varepsilon(k) is the energy of a (non-interacting) single-particle state, kk is the quantized momentum associated to that state, β=(kBT)−1\beta=(k_{\mathrm{B}}T)^{-1} is the inverse temperature in units of the Boltzmann constant, TT is the temperature, and μ\mu is the chemical potential. For a system containing NN fermions, the chemical potential serves as a “Lagrange multiplier” that is adjusted to ensure that the total number of particles equals NN.

In Figure 1(a) we illustrate the arrangement of spin-1/2 fermions in the limiting case of zero temperature. In this regime and in accordance with the Pauli exclusion principle, particles occupy the lowest available single-particle states sequentially—one with spin up and the other one with spin down—until all particles have been placed. The highest occupied state defines the Fermi level, with the corresponding momentum and energy referred to as the Fermi momentum and Fermi energy, respectively. The T=0T=0 curve in Figure 1(b) encapsulates this situation: at T=0T=0 (β→∞\beta\to\infty), all states with a given spin and with energies below the chemical potential μ\mu are completely filled while all the states above μ\mu remain empty, resulting in a sharp Fermi surface. However, at finite temperature (T≠0T \ne0) thermal effects smear the Fermi surface by promoting some fermions below the Fermi surface to states above it.

Figure 1. Single-particle properties of a relativistic free Fermi gas. (a) Single-particle energy ε/m\varepsilon/m as a function of the momentum k/mk/m, illustrating the relativistic dispersion relation. The Fermi momentum kFk_{\mathrm{F}} and the corresponding Fermi energy εF\varepsilon_{\mathrm{F}} are indicated at the last occupied single-particle state. All states above that are empty. (b) Occupation probability n(ε)n(\varepsilon) as a function of the scaled single-particle energy ε/μ\varepsilon/\mu, where μ\mu denotes the chemical potential. At zero temperature (T=0T=0), the distribution reduces to a sharp step function, whereas at finite temperature (T≠0T\ne0) thermal effects smear the Fermi surface.

A one-component Fermi gas

At zero temperature, the Fermi wavenumber kFk_{\mathrm{F}} serves as a convenient proxy for the number density nn of the system. To determine the total number of particles NN, one must sum over all occupied single-particle states, namely,

N=2∑kΘ(kF−∣k∣)→2∫V d3k(2π)3Θ(kF−∣k∣)=Vπ2∫0kFk2 dk=VkF33π2⟹n≡NV=kF33π2=pF33π2ℏ3.(2)N=2\sum_{\mathbf{k}}\Theta(k_{\mathrm{F}}-|\mathbf{k}|)\to2\int\frac{V\,\mathrm{d}^{3}k}{(2\pi)^{3}}\Theta(k_{\mathrm{F}}-|\mathbf{k}|)=\frac{V}{\pi^{2}}\int_{0}^{k_{\mathrm{F}}}k^{2}\,\mathrm{d}k=V\frac{k_{\mathrm{F}}^{3}}{3\pi^{2}}\Longrightarrow n\equiv\frac{N}{V}=\frac{k_{\mathrm{F}}^{3}}{3\pi^{2}}=\frac{p_{\mathrm{F}}^{3}}{3\pi^{2}\hbar^{3}}. \tag*{(2)}

Here the factor of 2 reflects the spin degeneracy, VV denotes the volume of the system, Θ(x)\Theta(x) is the Heaviside step function, and the first arrow indicates that in the thermodynamic limit—where both NN and VV approach infinity while their ratio remains finite—the discrete sum over states can be replaced by a continuous integral. The last expression determines the relation between the number density and the Fermi momentum pF≡ℏkFp_{\mathrm{F}}\equiv\hbar k_{\mathrm{F}}.

But why is the zero-temperature limit relevant, given that the core temperature of a young neutron star may reach a value as high as T=109 KT=10^{9}\,\mathrm{K}? At finite temperature, states just above the Fermi level begin to be populated at the expense of a corresponding depletion in the occupancy of states just below it; this situation is illustrated by the T≠0T\ne0 curve in Figure 1(b). In this regime, only states within an energy interval of the order of kBT≈0.1 MeVk_{\mathrm{B}}T\approx0.1\,\mathrm{MeV} around the Fermi level can be thermally excited to higher unoccupied states—those farther below remain inaccessible because they are Pauli blocked. The number of fermions excited above the Fermi level, that is, the approximate width of the T≠0T\ne0 curve, scales with the ratio of the temperature TT to the Fermi temperature TF≡εF/kBT_{\mathrm{F}}\equiv\varepsilon_{\mathrm{F}}/k_{\mathrm{B}}. Unlike the physical temperature, the Fermi temperature is entirely determined by the number density of the system. Under the extreme densities typical of a neutron-star core, this ratio is exceedingly small, yielding a fraction of thermally excited neutrons of about

NexN∼TTF∼10−3,(3)\frac{N_{\mathrm{ex}}}{N}\sim\frac{T}{T_{\mathrm{F}}}\sim10^{-3}, \tag*{(3)}

indicating that only about one in a thousand neutrons participates in thermal processes within the neutron star, such as heat capacity and thermal conductivity. Even more suppressed by the small ratio T/TFT/T_{\mathrm{F}}, are the thermal contributions to the energy density and pressure of the star, both of which scale as (T/TF)2∼10−6(T/T_{\mathrm{F}})^{2}\sim10^{-6}. Accordingly, in modeling the structure of a neutron star, it is an excellent approximation to set T≡0T\equiv0. Hence, we now proceed to compute the equation of state (EOS) of a zero-temperature, free Fermi gas.

At zero temperature, the EOS of a free Fermi gas of neutrons (or any fermion) is obtained by filling the lowest available single-particle states consistent with the Pauli exclusion principle, as depicted in Figure 1. Unlike the Fermi momentum—which is fixed solely by the number density and is therefore independent of the dispersion relation, the energy density and pressure of the system depend sensitively on the relation between the energy and the momentum. In particular, non-interacting fermions of rest mass mm obey the relativistic dispersion relation

ε(p)=(pc)2+(mc2)2,(4)\varepsilon(p)=\sqrt{(pc)^{2}+(mc^{2})^{2}}, \tag*{(4)}

where cc is the speed of light in vacuum and the momentum p=ℏkp=\hbar k is simply related to the wave number kk. Following similar steps as in Eq. (2), the energy density of a zero-temperature Fermi gas is given by

E(n)=EV=2∫d3k(2π)3ε(k)Θ(kF−∣k∣)=1π2∫0kF(ℏkc)2+(mc2)2 k2 dk(5)\mathcal{E}(n)=\frac{E}{V}=2\int\frac{\mathrm{d}^{3}k}{(2\pi)^{3}}\varepsilon(k)\Theta(k_{\mathrm{F}}-|\mathbf{k}|)=\frac{1}{\pi^{2}}\int_{0}^{k_{\mathrm{F}}}\sqrt{(\hbar kc)^{2}+(mc^{2})^{2}}\,k^{2}\,\mathrm{d}k \tag*{(5)}
=(mc2)4(ℏc)31π2∫0xFx21+x2 dx=E0[xFyF(xF2+yF2)−ln⁡(xF+yF)],(6)=\frac{(mc^{2})^{4}}{(\hbar c)^{3}}\frac{1}{\pi^{2}}\int_{0}^{x_{\mathrm{F}}}x^{2}\sqrt{1+x^{2}}\,\mathrm{d}x=\mathcal{E}_{0}\left[x_{\mathrm{F}}y_{\mathrm{F}}(x_{\mathrm{F}}^{2}+y_{\mathrm{F}}^{2})-\ln(x_{\mathrm{F}}+y_{\mathrm{F}})\right], \tag*{(6)}

where E0\mathcal{E}_{0} sets the energy scale, and xFx_{\mathrm{F}} and yFy_{\mathrm{F}} are the dimensionless Fermi momentum and Fermi energy:

E0≡18π2(mc2)4(ℏc)3,xF≡pFcmc2,yF≡εFmc2=1+xF2,(7)\mathcal{E}_{0}\equiv\frac{1}{8\pi^{2}}\frac{(mc^{2})^{4}}{(\hbar c)^{3}},\qquad x_{\mathrm{F}}\equiv\frac{p_{\mathrm{F}}c}{mc^{2}},\qquad y_{\mathrm{F}}\equiv\frac{\varepsilon_{\mathrm{F}}}{mc^{2}}=\sqrt{1+x_{\mathrm{F}}^{2}}, \tag*{(7)}

Note that while the above expression for the energy density is exact, it is instructive to examine its behavior in both the nonrelativistic (xF≪1x_{\mathrm{F}}\ll1) and ultra-relativistic (xF≫1x_{\mathrm{F}}\gg1) limits. That is,

E(n)→nmc2{1+310xF2if xF≪1,34xFif xF≫1.(8)\mathcal{E}(n)\to nmc^{2}\begin{cases}1+\dfrac{3}{10}x_{\mathrm{F}}^{2} & \text{if }x_{\mathrm{F}}\ll1,\\[6pt]\dfrac{3}{4}x_{\mathrm{F}} & \text{if }x_{\mathrm{F}}\gg1.\end{cases} \tag*{(8)}

The T=0T=0 equation of state relevant to the structure of compact stars, either white dwarfs or neutron stars, involves a relation between the pressure support against gravitational collapse and the energy density that is the source of gravity. In general, this relation is provided in parametric form; that is, both the pressure and the energy density are given in terms of the number density. In the context of a Fermi gas at zero temperature—even in the presence of interactions—the Hugenholtz–Van-Hove theorem [26]—plays a fundamental role, as it connects three key physical quantities: the energy density, the pressure, and the Fermi energy. The theorem may be expressed as follows:

EN+Pn=ϵF⟺E+P=nϵF.(9)\frac{E}{N}+\frac{P}{n}=\epsilon_{\mathrm{F}}\Longleftrightarrow\mathcal{E}+P=n\epsilon_{\mathrm{F}}. \tag*{(9)}

Invoking the Hugenholtz–Van Hove theorem and following the same definitions as in Eq. (7), one obtains the pressure of a free Fermi gas:

P(n)=E0[23xF3yF−xFyF+ln⁡(xF+yF)]⟶nmc2{xF25if xF≪1,xF4if xF≫1,(10)P(n)=\mathcal{E}_0\left[\frac{2}{3}x_{\mathrm{F}}^3y_{\mathrm{F}}-x_{\mathrm{F}}y_{\mathrm{F}}+\ln\left(x_{\mathrm{F}}+y_{\mathrm{F}}\right)\right]\longrightarrow nmc^2 \begin{cases} \frac{x_{\mathrm{F}}^2}{5} & \text{if }x_{\mathrm{F}}\ll1,\\ \frac{x_{\mathrm{F}}}{4} & \text{if }x_{\mathrm{F}}\gg1, \end{cases} \tag*{(10)}

where the arrow in the last expression denotes the appropriate nonrelativistic and relativistic limits.

In the particular case of white-dwarf stars—the final evolutionary stage of low-mass stars like our Sun—their stability and eventual gravitational collapse are both manifestations of physics beyond classical Newtonian theory. For low-mass white dwarfs, gravitational collapse is prevented by electron degeneracy pressure, which arises from the Pauli exclusion principle. However, as the mass of the star increases—and with it the electronic density—the electrons become relativistic, causing the pressure to soften from scaling as P∼n5/3P\sim n^{5/3} to P∼n4/3P\sim n^{4/3}; see Eq. (10). This reduction in pressure is no longer sufficient to counteract gravity, and the star collapses once it reaches the Chandrasekhar mass, Mch≈1.4 M⊙M_{\mathrm{ch}}\approx1.4\,M_{\odot} ([9]). Although unknown at the time, we now understand that collapsing white dwarfs form either neutron stars or black holes. Remarkably, when Chandrasekhar made this groundbreaking prediction as a newly minted graduate student, the neutron had not yet been discovered—Chadwick’s seminal paper on the “Possible Existence of a Neutron” appeared a year later ([8]). Given that the pressure support in white-dwarf stars arises primarily from electron degeneracy pressure, it is instructive to solve the equations of hydrostatic equilibrium in this context before delving into the study of neutron stars ([27]).

A two-component Fermi gas

Although a neutron star is most commonly perceived as a conglomerate of neutrons, it is energetically advantageous for some of the neutrons near the Fermi surface to undergo beta decay into protons, electrons, and antineutrinos. In anticipation of this more general situation, we aim to compute the energy and pressure of a system composed of both neutrons and protons, under the assumption that the neutron and proton densities are each conserved individually; that is, we neglect electromagnetic as well as weak interactions. In this simplified scenario, the individual neutron (nnn_n) and proton (npn_p) densities are treated as fixed, predetermined quantities. To quantify a possible neutron-proton asymmetry, we introduce a dimensionless asymmetry parameter α\alpha given by

α≡nn−npnn+np=nn−npn.(11)\alpha\equiv\frac{n_n-n_p}{n_n+n_p}=\frac{n_n-n_p}{n}. \tag*{(11)}

Following this convention, α=0\alpha=0 corresponds to symmetric nuclear matter with equal numbers of neutrons and protons, while α=1\alpha=1 represents pure neutron matter—a system made entirely of neutrons. As in the previous section, the Fermi momentum plays an important role as a proxy for the density. For a two-component system we must introduce individual neutron kFnk_{\mathrm{F}}^n and proton kFpk_{\mathrm{F}}^p Fermi momenta through the following definitions:

nn=(kFn)33π2=(1+α2)n=(1+α)kF33π2,(12)n_n=\frac{(k_{\mathrm{F}}^n)^3}{3\pi^2}=\left(\frac{1+\alpha}{2}\right)n=(1+\alpha)\frac{k_{\mathrm{F}}^3}{3\pi^2}, \tag*{(12)}
np=(kFp)33π2=(1−α2)n=(1−α)kF33π2.(13)n_p=\frac{(k_{\mathrm{F}}^p)^3}{3\pi^2}=\left(\frac{1-\alpha}{2}\right)n=(1-\alpha)\frac{k_{\mathrm{F}}^3}{3\pi^2}. \tag*{(13)}

Note that in this case the Fermi momenta kFk_{\mathrm{F}} has been defined as a proxy for the total density of the system. This yields the following expressions for the individual Fermi momenta:

nn+np=n=2kF33π2⟶{kFn=(1+α)1/3kF,kFp=(1−α)1/3kF.(14)n_n+n_p=n=\frac{2k_{\mathrm{F}}^3}{3\pi^2}\longrightarrow \begin{cases} k_{\mathrm{F}}^n=(1+\alpha)^{1/3}k_{\mathrm{F}},\\ k_{\mathrm{F}}^p=(1-\alpha)^{1/3}k_{\mathrm{F}}. \end{cases} \tag*{(14)}

We are now in a position to compute the energy per particle of a two-component system. We anticipate that as a consequence of the Pauli exclusion principle, the energy will increase as the system develops a neutron-proton asymmetry. The Pauli exclusion principle plays a dominant role because, once the system acquires a neutron excess, protons occupying states near the Fermi surface must be promoted to unoccupied states above the neutron Fermi surface and this costs energy. This process is the isospin analogue of flipping a spin in Figure 1.

To provide a more intuitive picture, it is customary to address the role of a neutron-proton asymmetry on the energy of the system in terms of two main contributions: (a) the energy of symmetric (nn=npn_n=n_p) nuclear matter and (b) the symmetry energy that provides a correction to the symmetric limit to account for the cost of turning protons into neutrons (or vice versa). To do so, we provide a Taylor expansion of the energy per nucleon in even powers of α\alpha:

EA(n,α)=EA(n,α=0)+α2S(n)+α4S4(n)+⋯(15)\frac{E}{A}(n,\alpha)=\frac{E}{A}(n,\alpha=0)+\alpha^2S(n)+\alpha^4S_4(n)+\cdots \tag*{(15)}

The reason that only even powers of α\alpha appear in the expansion is that, in the absence Coulomb interactions, it is equally costly to turn protons into neutrons than neutrons into protons. Note that throughout this contribution we neglect the very small neutron-proton mass difference. The first term in the above expansion represents the energy per particle of symmetric nuclear matter and may be directly obtained from the energy density listed in Eq. (6). That is,

EA(n,α≡0)=E(n)n.(16)\frac{E}{A}(n,\alpha\equiv0)=\frac{\mathcal{E}(n)}{n}. \tag*{(16)}

The leading-order correction to the energy of symmetric nuclear matter is the symmetry energy S(n)S(n), which plays a critical role in the structure and dynamics of both neutron-rich nuclei and neutron stars; see [25, 30, 51, 6] (Refs.(Tsang et al. 2012; Mammei et al. 2024), and references contained therein.

Assuming, as we have done so far, that the only important correlations are those induced by the Pauli exclusion principle, one obtains a remarkably simple expression for the symmetry energy:

S(n)mc2=xF26yF=16{xF2if xF≪1,xFif xF≫1.(17)\frac{S(n)}{mc^2}=\frac{x_{\mathrm{F}}^2}{6y_{\mathrm{F}}}=\frac{1}{6}\begin{cases}x_{\mathrm{F}}^2 & \text{if }x_{\mathrm{F}}\ll1,\\ x_{\mathrm{F}} & \text{if }x_{\mathrm{F}}\gg1.\end{cases} \tag*{(17)}

That is, the energy cost of converting protons into neutrons (or vice versa) increases quadratically with the Fermi momentum at low densities and becomes linear at very high densities. However, given that the neutron excess in neutron-star matter is large under conditions of chemical equilibrium, it is important to assess whether neglecting higher-order terms in the Taylor expansion is justified. It has been shown in [42] that successive terms in the expansion are strongly suppressed relative to the preceding ones. Consequently, we conclude—at least for the case of a relativistic free Fermi gas—that the so-called parabolic approximation, namely,

EA(n,α)≈EA(n,α≡0)+α2S(n),(18)\frac{E}{A}(n,\alpha)\approx\frac{E}{A}(n,\alpha\equiv0)+\alpha^2S(n), \tag*{(18)}

provides an excellent approximation to the energy of asymmetric matter. In particular, one can establish the following important connection between the energy of pure neutron matter (α=1\alpha=1), the energy of symmetric nuclear matter (α=0\alpha=0), and the symmetry energy:

EA(n,α≡1)≈EA(n,α≡0)+S(n).(19)\frac{E}{A}(n,\alpha\equiv1)\approx\frac{E}{A}(n,\alpha\equiv0)+S(n). \tag*{(19)}

In this context, the symmetry energy may be interpreted as the energy cost required to convert symmetric nuclear matter into pure neutron matter. This intuitive picture remains valid in many—although not all—more realistic models.

Chemical Equilibrium

We have now assembled all the ingredients required to construct the equation of state of neutron-star matter—at least within the Fermi-gas limit. As a macroscopic system containing a baryon number of the order of 105710^{57}, neutron-star matter must include leptons in order to ensure charge neutrality. Moreover, because neutron stars cool predominantly through neutrino emission via Urca processes, which involve both neutron beta decay and electron capture,

n→p+e−+νˉe ↔ e−+p→n+νe,(20)n\to p+e^-+\bar{\nu}_e\ \leftrightarrow\ e^-+p\to n+\nu_e, \tag*{(20)}

chemical equilibrium must also be enforced. Hence, assuming massless neutrinos with vanishing chemical potential—an excellent approximation for cold, fully catalyzed neutron stars—the energy density may be written as

EV(ρ,α)=EnV(ρn)+EpV(ρp)+EeV(ρe),(21)\frac{E}{V}(\rho,\alpha)=\frac{E_n}{V}(\rho_n)+\frac{E_p}{V}(\rho_p)+\frac{E_e}{V}(\rho_e), \tag*{(21)}

where, by charge neutrality, the electron and proton densities are equal. Moreover, to avoid confusion, we denote the baryon density by ρ\rho rather than by nn. That is,

ρn=1+α2ρandρp=ρe=1−α2ρ.(22)\rho_n=\frac{1+\alpha}{2}\rho\quad\text{and}\quad\rho_p=\rho_e=\frac{1-\alpha}{2}\rho. \tag*{(22)}

Unlike asymmetric nuclear matter, where both the baryon density ρ\rho and the neutron–proton asymmetry α\alpha may be treated as independent input parameters, in fully catalyzed neutron-star matter the asymmetry must be determined dynamically by minimizing the total energy density at each density. Specifically, the equilibrium value of α\alpha is obtained by solving the following transcendental equation:

(∂E/V∂α)ρ=0→(∂En∂N)V,T=0(∂ρn∂α)ρ+[(∂Ep∂Z)+(∂Ee∂Z)]V,T=0(∂ρp∂α)ρ=ρ2[μn−μp−μe]=0.(23)\left(\frac{\partial E/V}{\partial\alpha}\right)_{\rho}=0\to\left(\frac{\partial E_n}{\partial N}\right)_{V,T=0}\left(\frac{\partial\rho_n}{\partial\alpha}\right)_{\rho}+\left[\left(\frac{\partial E_p}{\partial Z}\right)+\left(\frac{\partial E_e}{\partial Z}\right)\right]_{V,T=0}\left(\frac{\partial\rho_p}{\partial\alpha}\right)_{\rho}=\frac{\rho}{2}\left[\mu_n-\mu_p-\mu_e\right]=0. \tag*{(23)}

Thus, in chemical equilibrium, the neutron-proton asymmetry as a function of the baryon density ρ\rho is fixed by enforcing the condition

μn=μp+μe.(24)\mu_n=\mu_p+\mu_e. \tag*{(24)}

This result is already implicit in Eq. (20) upon assuming a vanishing neutrino chemical potential. Although the condition is entirely general for neutron-star matter, in the particular case in which neutrons, protons, and electrons may be treated as relativistic free Fermi gases one finds

yFn=yFp+xFp⟺ρpρn=18(xFnyFn)3→18(25)y_{\mathrm{F}}^{n}=y_{\mathrm{F}}^{p}+x_{\mathrm{F}}^{p}\Longleftrightarrow\frac{\rho_{p}}{\rho_{n}}=\frac{1}{8}\left(\frac{x_{\mathrm{F}}^{n}}{y_{\mathrm{F}}^{n}}\right)^{3}\to\frac{1}{8} \tag*{(25)}

where the electron mass has been neglected and the arrow denotes the high-density limit, m/kFn→0m/k_{\mathrm{F}}^{n}\to0. Thus, at sufficiently high densities, the ratio of protons to neutrons approaches ρp/ρn≃1/8\rho_{p}/\rho_{n}\simeq1/8. Equivalently, the proton fraction tends to Yp=1/9Y_{p}=1/9 and the neutron–proton asymmetry approaches α=7/9\alpha=7/9. It is the requirement of charge neutrality that plays a dominant role in producing the large neutron excess characteristic of neutron stars.

The Walecka Model

The Walecka model (Walecka, 1974), which will be the focus of this section, provides a relativistic framework for understanding the structure of atomic nuclei. Among the earliest attempts at a relativistic description of the nuclear dynamics are the works of Johnson and Teller [28], Duerr [19], and Miller and Green (Miller and Green, 1972). For a complete historical account—as well as a discussion of some of the early refinements to the Walecka model—see Ref. [48]. Beyond the desire to describe the properties of nuclear matter and their impact on ground-state energies and densities of atomic nuclei, a key motivation for a relativistic approach—and one that remains true to this day—was the development of a theory of highly condensed matter that remains causal at all densities and that can be applied to neutron stars (Walecka, 1974).

The need for a relativistic theory of atomic nuclei is not rooted in the idea that nucleons move at relativistic speeds; indeed, the dimensionless Fermi momentum defined in Eq. (7) is significantly less than one. Rather, the justification lies in the modest binding energy of nuclei that emerges from a strong cancellation between an intermediate-range attraction and a strong short-range repulsion. In this context, nucleons satisfy a Dirac equation in the presence of large scalar and vector potentials—a hallmark of the relativistic approach. This fact alone reproduces the highly successful phenomenology of the nuclear shell model: a relatively small binding energy accompanied by a strong spin-orbit potential [48]. Moreover, as we show below, the Walecka model provides a natural explanation for the saturation of symmetric nuclear matter.

In the original Walecka model—also known as the σ\sigma–ω\omega model—nucleons interact through the exchange of a scalar σ\sigma meson, which provides the intermediate-range attraction, and a vector ω\omega meson, which generates the short-range repulsion. A representative Feynman diagram illustrating such a two-body interaction between a proton and a neutron is shown in Figure 2.

Figure 2. Feynman diagram illustrating the nucleon-nucleon interaction in the Walecka (σ\sigma-ω\omega) model.

Because our primary goal is to determine the equation of state of uniform nuclear matter, we assume the system to be both translationally and rotationally invariant. Under these conditions, the Lagrangian density in the mean-field approximation is given by

LMFT=ψˉ[iγμ∂μ−gVγ0V0−(M−gSϕ0)]ψ−12mS2ϕ02+12mV2V02(26)\mathcal{L}_{\mathrm{MFT}}=\bar{\psi}\left[i\gamma^{\mu}\partial_{\mu}-g_{V}\gamma^{0}V_{0}-(M-g_{S}\phi_{0})\right]\psi-\frac{1}{2}m_{S}^{2}\phi_{0}^{2}+\frac{1}{2}m_{V}^{2}V_{0}^{2} \tag*{(26)}

where ψ\psi denotes the nucleon field and we employ the standard representation of the Dirac γ\gamma matrices [41]. The intermediate-range attraction is mediated by a scalar meson of mass mSm_{S} and coupling strength gSg_{S}, represented by the mean field ϕ0\phi_{0}. Conversely, the short-range repulsion is generated by a vector meson of mass mVm_{V} and coupling strength gVg_{V}, described by the mean field V0V_{0}. The energy–momentum tensor associated with this mean-field Lagrangian is given by

Tμν=iψˉγμ∂νψ+(12ms2ϕ02−12mv2V02)gμν.(27)T_{\mu\nu}=i\bar{\psi}\gamma_{\mu}\partial_{\nu}\psi+\left(\frac{1}{2}m_s^2\phi_0^2-\frac{1}{2}m_v^2V_0^2\right)g_{\mu\nu}. \tag*{(27)}

In the mean-field approximation adopted here, the meson fields satisfy a set of Yukawa equations of the following form:

(∇2−ms2)ϕ0=−gsρs→gsϕ0≡Φ0=(gs2ms2)ρs,(28)(\nabla^2-m_s^2)\phi_0=-g_s\rho_s\rightarrow g_s\phi_0\equiv\Phi_0=\left(\frac{g_s^2}{m_s^2}\right)\rho_s, \tag*{(28)}
(∇2−mv2)V0=−gvρv→gvV0≡W0=(gv2mv2)ρv.(29)(\nabla^2-m_v^2)V_0=-g_v\rho_v\rightarrow g_vV_0\equiv W_0=\left(\frac{g_v^2}{m_v^2}\right)\rho_v. \tag*{(29)}

where ρs\rho_s is the scalar density, ρv\rho_v the conserved vector (or baryon) density, and the arrow denotes the appropriate limit for a translational/rotational invariant system. Note that we adopted the standard “nuclear-physics” convention in which the baryon density is denoted by ρ\rho rather than by nn, as in the previous sections. In turn, the nucleon field satisfies a Dirac equation with attractive scalar and repulsive vector potentials. That is,

(α⋅p+β(M−Φ0)+W0)U(p,λ)=ε(p)U(p,λ)⟺(α⋅p+βM⋆)U(p,λ)=ε⋆(p)U(p,λ),(30)(\boldsymbol{\alpha}\cdot\mathbf{p}+\beta(M-\Phi_0)+W_0)U(p,\lambda)=\varepsilon(p)U(p,\lambda)\Longleftrightarrow(\boldsymbol{\alpha}\cdot\mathbf{p}+\beta M^\star)U(p,\lambda)=\varepsilon^\star(p)U(p,\lambda), \tag*{(30)}

where α=γ0γ\alpha=\gamma^0\gamma, β=γ0\beta=\gamma^0, and U(p,λ)U(p,\lambda) denotes a four-component Dirac spinor with momentum p\mathbf{p} and spin projection λ\lambda. The arrow in the above equation indicates that, for all practical purposes, the resulting expression is formally identical to the free Dirac equation for a nucleon with an effective mass M⋆≡M−Φ0M^\star\equiv M-\Phi_0 and an effective energy ε⋆(p)≡ε(p)−W0\varepsilon^\star(p)\equiv\varepsilon(p)-W_0. This result implies that, within the mean-field approximation, the dispersion relation for a nucleon propagating in uniform nuclear matter takes the familiar relativistic form

ε(p)=p2+M⋆2+W0,(31)\varepsilon(p)=\sqrt{p^2+M^{\star2}}+W_0, \tag*{(31)}

which is formally identical to the free-particle expression, aside from the appearance of the effective mass M⋆M^\star and the constant vector mean field W0W_0. Throughout the remainder of this work, we adopt natural units with ℏ=c=1\hbar=c=1.

Following the formalism developed in Sec.2.1, the energy density of the system may be written as

E≡T00=12ms2ϕ02−12mv2V02+γ2π2∫0kFk2ε(k) dk=gs22ms2ρs2+gv22mv2ρv2+γ2π2∫0kFk2ε⋆(k) dk,(32)\mathcal{E}\equiv T_{00}=\frac{1}{2}m_s^2\phi_0^2-\frac{1}{2}m_v^2V_0^2+\frac{\gamma}{2\pi^2}\int_0^{k_F}k^2\varepsilon(k)\,dk=\frac{g_s^2}{2m_s^2}\rho_s^2+\frac{g_v^2}{2m_v^2}\rho_v^2+\frac{\gamma}{2\pi^2}\int_0^{k_F}k^2\varepsilon^\star(k)\,dk, \tag*{(32)}

where γ\gamma is the spin-isospin degeneracy: γ=4\gamma=4 for symmetric nuclear matter and γ=2\gamma=2 for pure neutron matter. As in Sec.2.1, the Fermi momentum can also be used as a proxy for the conserved vector density, namely,

ρ≡ρv≡AV=γkF36π2.(33)\rho\equiv\rho_v\equiv\frac{A}{V}=\gamma\frac{k_F^3}{6\pi^2}. \tag*{(33)}

which can then be used to obtain the energy density of an interacting Fermi gas of mass M⋆M^\star as a function of density. That is,

EF⋆(ρ)=E0⋆[xF⋆yF⋆(xF⋆2+yF⋆2)−ln⁡(xF⋆+yF⋆)],(34)\mathcal{E}_F^\star(\rho)=\mathcal{E}_0^\star\left[x_F^\star y_F^\star\left(x_F^{\star2}+y_F^{\star2}\right)-\ln\left(x_F^\star+y_F^\star\right)\right], \tag*{(34)}

where E0⋆\mathcal{E}_0^\star sets the energy scale for the problem, and xF⋆x_F^\star and yF⋆y_F^\star are the dimensionless Fermi momentum and Fermi energy defined as

E0⋆=γM⋆416π2,xF⋆≡kFM⋆,yF⋆≡1+xF⋆2.(35)\mathcal{E}_0^\star=\frac{\gamma M^{\star4}}{16\pi^2},\qquad x_F^\star\equiv\frac{k_F}{M^\star},\qquad y_F^\star\equiv\sqrt{1+x_F^{\star2}}. \tag*{(35)}

This yields a closed-form expression for the total energy density of the system as a function of the conserved baryon density ρ\rho:

E(ρ)=gs22ms2ρs2+gv22mv2ρv2+E0⋆[xF⋆yF⋆(xF⋆2+yF⋆2)−ln⁡(xF⋆+yF⋆)].(36)\mathcal{E}(\rho)=\frac{g_s^2}{2m_s^2}\rho_s^2+\frac{g_v^2}{2m_v^2}\rho_v^2+\mathcal{E}_0^\star\left[x_F^\star y_F^\star\left(x_F^{\star2}+y_F^{\star2}\right)-\ln\left(x_F^\star+y_F^\star\right)\right]. \tag*{(36)}

At first glance, it may appear that—once the conserved baryon density ρ\rho is specified—the energy density of the system could be obtained directly by evaluating the preceding expression. In practice, however, because the scalar density is not conserved, one must first determine the effective nucleon mass M⋆M^\star as a function of the baryon density. Using (28), the effective mass satisfies the following transcendental equation:

M⋆=M−(gs2ms2)ρs(kF,M⋆)=M−(gs2ms2)(γM⋆34π2)[xF⋆yF⋆−ln⁡(xF⋆+yF⋆)].(37)M^\star=M-\left(\frac{g_s^2}{m_s^2}\right)\rho_s(k_F,M^\star)=M-\left(\frac{g_s^2}{m_s^2}\right)\left(\frac{\gamma M^{\star3}}{4\pi^2}\right)\left[x_F^\star y_F^\star-\ln\left(x_F^\star+y_F^\star\right)\right]. \tag*{(37)}

Once the baryon density is fixed, this equation is solved self-consistently to obtain M⋆M^\star, which may then be substituted into (36) to determine the energy density of the system at the given density.

In a similar fashion, one can determine the pressure of the system from the energy-momentum tensor given in (27). That is,

P=13Tii=−gs22ms2ρs2+gv22mv2ρv2+γ6π2∫0kFk4ε⋆(k) dk,(38)P=\frac{1}{3}T_{ii}=-\frac{g_s^2}{2m_s^2}\rho_s^2+\frac{g_v^2}{2m_v^2}\rho_v^2+\frac{\gamma}{6\pi^2}\int_0^{k_F}\frac{k^4}{\varepsilon^\star(k)}\,dk, \tag*{(38)}

or evaluating the integral in closed form, one obtains:

P(ρ)=−gs22ms2ρs2+gv22mv2ρ02+gv2ρ0[13xF∗3yF∗−xF∗yF∗+ln⁡(xF∗+yF∗)].(39)P(\rho)=-\frac{g_s^2}{2m_s^2}\rho_s^2+\frac{g_v^2}{2m_v^2}\rho_0^2+g_v^2\rho_0\left[\frac{1}{3}x_F^{\ast3}y_F^\ast-x_F^\ast y_F^\ast+\ln\left(x_F^\ast+y_F^\ast\right)\right]. \tag*{(39)}

As in the case of the energy density, one is able to compute the pressure at a given density only after solving the transcendental equation for the effective mass M∗M^\ast.

Finally, in neutron-star matter one must enforce chemical equilibrium as expressed in Eq. (24). In the Walecka model, where the vector interaction is purely isoscalar, the condition of chemical equilibrium leads to a relation that is nearly identical to that obtained for a free relativistic Fermi gas in Eq. (25), with the sole modification that the free nucleon mass is replaced by its effective mass, M→M∗M \to M^\ast. That is,

yFn∗=yFp∗+xFp∗⟺ρpρn=18(xFn∗yFn∗)3→18.(40)y_F^{n\ast}=y_F^{p\ast}+x_F^{p\ast}\Longleftrightarrow\frac{\rho_p}{\rho_n}=\frac{1}{8}\left(\frac{x_F^{n\ast}}{y_F^{n\ast}}\right)^3\to\frac{1}{8}. \tag*{(40)}

Thus, as in the free Fermi-gas case, the proton fraction approaches Yp=1/9Y_p=1/9 in the high-density limit, corresponding to a neutron-proton asymmetry of α=7/9\alpha=7/9.

Results

As we have shown in Eq. (15), the energy of a two-component system may be approximated as the sum of the energy of symmetric nuclear matter plus the symmetry energy—with the leading-order correction scaling as the fourth power of the neutron proton asymmetry α\alpha. Using this expression, the rigorous definition of the symmetry energy is given by

S(ρ)=12(∂2E∂α2)α=0.(41)S(\rho)=\frac{1}{2}\left(\frac{\partial^2\mathcal{E}}{\partial\alpha^2}\right)_{\alpha=0}. \tag*{(41)}

However, as argued earlier in the case of a free Fermi gas, the parabolic approximation is often used in the literature to approximate the symmetry energy as the difference between the energy per nucleon of pure neutron matter and that of symmetric nuclear matter; that is,

S(ρ)≈EA(ρ,α≡1)−EA(ρ,α≡0),(42)S(\rho)\approx\frac{E}{A}(\rho,\alpha\equiv1)-\frac{E}{A}(\rho,\alpha\equiv0), \tag*{(42)}

Hence, within the scope of the parabolic approximation, the symmetry energy has a very simple interpretation: it is the energy cost at fixed density of converting symmetric nuclear matter with equal numbers of protons and neutrons to pure neutron matter. In the context of a free Fermi gas, this cost is entirely dictated by the Pauli exclusion principle. In the case of the Walecka model, the symmetry energy becomes a simple generalization of Eq. (17), namely,

S(ρ)=MxF26yF⟶M∗xF∗26yF∗.(43)S(\rho)=M\frac{x_F^2}{6y_F}\longrightarrow M^\ast\frac{x_F^{\ast2}}{6y_F^\ast}. \tag*{(43)}

In Figure 3(a) we display the equation of state for both symmetric nuclear matter (SNM) and pure neutron matter (PNM) as predicted by the Walecka model ([48] (Walecka 1974)). The binding energy per nucleon is defined by subtracting the nucleon rest mass from the total energy per particle, namely, B/A=E/A−MB/A=E/A-M. We note that SNM saturates: the binding energy per nucleon reaches a minimum at a density ρ0\rho_0, which implies that the pressure vanishes at saturation. Saturation is a hallmark of the nuclear dynamics which manifests itself in the nearly constant interior density of heavy nuclei. In the particular case of the Walecka model, the saturation mechanism is especially instructive. Although the scalar attraction is stronger than the corresponding vector repulsion,

Figure 3. Binding energy per nucleon for symmetric nuclear matter (SNM) and for pure neutron matter (PNM) as predicted by (a) the Walecka model (Walecka, 1974; Serot and Walecka, 1986) and by (b) the refined FSUGold2 model [11]. Also shown is the symmetry energy (SYM) and its parabolic approximation, defined as the energy per nucleon of pure neutron matter relative to corresponding quantity for symmetric nuclear matter (PNM-SNM).

gs2M2ms2=357.469>273.871=gv2M2mv2,(44)g_{\mathrm{s}}^2\frac{M^2}{m_{\mathrm{s}}^2}=357.469>273.871=g_{\mathrm{v}}^2\frac{M^2}{m_{\mathrm{v}}^2}, \tag*{(44)}

the scalar attraction itself saturates. Specifically, the ratio of the scalar density to the conserved vector density vanishes at high densities. As a result, the scalar attraction becomes ineffective at sufficiently large densities, so the vector repulsion ultimately dominates. In contrast, pure neutron matter—with a spin-isospin degeneracy of γ=2\gamma=2 rather than γ=4\gamma=4 as in the case of symmetric nuclear matter—does not saturate.

Also shown in Figure 3(a) is the symmetry energy computed both exactly and within the parabolic approximation, as given in Eqs. (41) and (42), respectively. While the parabolic approximation provides a reasonable description of the symmetry energy, it is not exact, particularly at high densities. Consequently, caution must be exercised when employing the parabolic approximation to quantify the role of the symmetry energy, especially in applications to neutron-star structure, where supranuclear densities are probed.

Since its inception more than five decades ago, the Walecka model ((Walecka, 1974)) has been systematically refined to achieve better agreement with both terrestrial experiments and astrophysical observations. One such refinement led to the development of the FSUGold2 model, which was calibrated using the latest experimental data and astrophysical constraints; see [11] and references contained therein. Although differences in the predicted trends relative to the original Walecka model are already apparent in Figure 3(b), we conclude this section by quantifying several of the most important distinctions between the two models.

To do so, we observe that in the vicinity of the saturation density ρ0\rho_0, the density dependence of both the energy per nucleon of symmetric nuclear matter as well as the symmetry energy are contained in a few bulk parameters. That is,

ESNM(ρ)=E(ρ,α=0)=ε0+12K0x2+⋯(45)\mathcal{E}_{\mathrm{SNM}}(\rho)=\mathcal{E}(\rho,\alpha=0)=\varepsilon_0+\frac{1}{2}K_0x^2+\cdots \tag*{(45)}
S(ρ)=J+Lx+⋯(46)S(\rho)=J+Lx+\cdots \tag*{(46)}

where x=(ρ−ρ0)/3ρ0x=(\rho-\rho_0)/3\rho_0 is a dimensionless parameter that quantifies the deviations of the density from its value at saturation. Because symmetric nuclear matter saturates, the expansion contains no term linear in xx; that is, the pressure of symmetric nuclear matter vanishes at saturation. The leading-order correction is therefore governed by the incompressibility coefficient K0K_0, which has been constrained by measurements of giant monopole resonances ([24]) to lie in the interval K0∼220K_0\sim220–240 MeV240\,\mathrm{MeV}—in excellent agreement with the value predicted by the FSUGold2 model, as shown in Table 1. Since the two free parameters of the Walecka model are calibrated to reproduce the saturation density and the binding energy per nucleon at saturation of symmetric nuclear matter, the resulting prediction for the incompressibility coefficient K0K_0 is a genuine prediction, albeit one that lies well outside the experimentally determined range; see Table 1.

Modelρ0\rho_0ε0\varepsilon_0M∗/MM^*/MK0K_0JJLL
Walecka ([48] (Walecka 1974))0.149-15.750.541547.1619.2968.46
FSUGold2 ([11])0.150-16.270.593237.8837.59112.72

Table 1. Table 1 Bulk parameters of infinite nuclear matter at saturation density ρ0\rho_0 as predicted by both the Walecka and FSUGold2 models.The quantities ε0\varepsilon_0, M∗/MM^*/M, and K0K_0 represent the binding energy per nucleon, the effective mass, and incompressibility coefficient of symmetric nuclear matter, whereas JJ and LL denote the energy and slope of the symmetry energy—all evaluated at ρ0\rho_0. With the exception of the saturation density that is given in fm−3\mathrm{fm}^{-3} and M∗/MM^*/M which is dimensionless, all other quantities are expressed in MeV.

Also listed in Table 1 are the symmetry energy JJ and its slope LL evaluated at saturation density. In the Walecka model, the symmetry energy arises entirely from the Pauli exclusion principle, since converting protons into neutrons (or vice versa) is Pauli blocked. In contrast, the FSUGold2 model includes additional dynamical contributions through the explicit coupling to the ρ\rho meson, the isovector partner of the ω\omega meson. As illustrated in Figure 3, the ρ\rho-meson contribution enhances the symmetry energy, leading to the values reported in Table 1. The significantly larger values predicted by the FSUGold2 model are in good agreement with the neutron-skin thickness of 208Pb{}^{208}\mathrm{Pb} extracted by the PREX collaboration ([3, 45]).

Conclusions and Outlook

In closing, we emphasize that the equation of state of infinite nuclear matter provides a unique window into the complex dynamics of the nuclear many-body system. The bulk properties of symmetric nuclear matter encode saturation, namely the existence of an equilibrium density that is reflected in the interior density of heavy nuclei. Moreover, unlike electronic systems, nuclear matter—composed of two distinct constituents, neutrons and protons—exhibits particularly rich dynamics as one moves away from the symmetric limit. Indeed, the symmetry energy, which quantifies the energetic cost of converting symmetric nuclear matter into pure neutron matter, lies at the forefront of the scientific mission of modern radioactive-beam facilities. Perhaps most compelling, however, is the central role played by the nuclear matter equation of state in shaping the structure, dynamics, and composition of neutron stars in the emerging era of multi-messenger astronomy. In this context, the microphysics governing neutron stars is ultimately encoded in the equation of state of nuclear matter under extreme conditions of density and neutron-proton asymmetry.

The critical role of the nuclear matter equation of state can be made quantitative through a small set of bulk parameters defined at saturation density. Among these, the incompressibility of symmetric nuclear matter K0K_0 determines the stiffness of the equation of state near saturation and is constrained primarily by measurements of isoscalar giant monopole resonances in finite nuclei. In contrast, the density dependence of the symmetry energy, commonly characterized by its slope parameter LL, controls the pressure of neutron-rich matter around saturation and plays a central role in determining the properties of both neutron-rich nuclei and neutron stars. At higher densities, relevant to the inner cores of neutron stars, the behavior of the equation of state is more naturally described in terms of the speed of sound dP/dEdP/d\mathcal{E}, whose density dependence encodes the microphysics that constrains the maximum mass, compactness, and possible phase structure of dense matter. Together, these parameters provide a coherent framework for connecting theoretical models, laboratory experiments, and astrophysical observations—an approach now commonly referred to as the density ladder, as illustrated in Figure 4 [40].

Neutron-star inspired density ladder

Figure 4. Neutron-star inspired density ladder. Akin to the cosmological distance ladder, the confluence of so many advances in nuclear astrophysics motivates the creation of the equation of state density ladder—connecting theoretical models, terrestrial nuclear experiments, and astrophysical observations. As illustrated in the figure, no single method can determine the equation of state over its vast density domain, yet each rung on the ladder informs the equation of state in a suitable density domain that overlaps with its neighboring rungs [40].

Within this broader landscape, the aim of this work was to present an introductory article accessible to a broad audience—including undergraduate students—that provides an overview of the wide-ranging applications of relativistic mean-field theory, with particular emphasis on the role of nuclear physics in constructing an equation of state capable of describing the remarkable properties of neutron stars. Rather than beginning with highly sophisticated models, we first established the essential concepts underlying the equation of state in the simple context of free Fermi gases. With these central ideas in place, we then moved to a more realistic description based on the relativistic Walecka model, in which the saturation properties of symmetric nuclear matter emerge naturally from the interplay of scalar and vector Lorentz fields. Finally, in light of the substantial progress achieved over the five decades since the introduction of the Walecka model, we introduced the FSUgold2 parametrization—a modern relativistic model accurately calibrated, with quantified theoretical uncertainties, to a broad set of laboratory and astrophysical observables—thereby mitigating many of the shortcomings of the original formulation.

Looking ahead, we conclude by illustrating in Figure 5 recent progress in both astrophysical observations of neutron stars and theoretical developments within relativistic mean-field models. Details of the four theoretical models shown in the figure may be found in Refs. [21, 11, 12]. In turn, the three confidence contours represent simultaneous mass-radius measurements of the millisecond pulsars (MSPs) PSR J0030+0451 [35, 46], PSR J0740+6620 [36, 47], and PSR J0437-4715 [14]. This classification makes MSPs ideal targets for precision mass-radius measurements, one of the central goals of the NICER mission.

Figure 5. Mass-radius relation for neutron stars as predicted by a set of four accurately calibrated relativistic models (Fattoyev and Piekarewicz, [21]; Chen and Piekarewicz [11, 12]). Also shown are NICER 68% and 95% credible intervals for the three millisecond pulsars: PSR J0030+0451 (Miller et al., [35]; Riley et al. [46]), PSR J0740+6620 (Miller et al., [36]; Riley et al. [47]), and PSR J0437-4715 (Choudhury et al., [14]). The data point at M⋆=(2.08±0.07)M⊙M_\star=(2.08 \pm0.07)M_\odot denotes the mass of PSR J0740+6620 previously obtained via Shapiro delay (Cromartie et al., [16]; Fonseca et al. [23]).

All three NICER targets are recycled neutron stars that have been spun up through accretion and possess relatively weak magnetic fields, which mitigate systematic uncertainties in modeling X-ray emission from localized hot spots on the stellar surface. Moreover, when part of binary systems, independent radio-timing mass measurements via Shapiro delay provide precise mass constraints that help break mass-radius degeneracies inherent to pulse-profile modeling. Such a mass measurement is also shown in Figure 5 for PSR J0740+6620, a neutron star that currently holds the record as the most massive—and best measured—neutron star to date [16 Fonseca] et al., 2021). As such, MSPs are uniquely suited for probing the equation of state of cold, dense matter. These developments—together with the historic detection of gravitational waves from neutron-star mergers ([1])—have spearheaded the brand-new era of multi-messenger astronomy, placing nuclear science at the forefront of such an exciting and rapidly evolving field. We hope that this chapter will inspire a new generation of scientists and offer a clear entry point to the extensive and rapidly evolving literature on this fascinating topic.

Acknowledgments

This material is based upon work supported by the U.S. Department of Energy Office of Science, Office of Nuclear Physics under Award Number DE-FG02-92ER40750.

References

  1. [1]B. P. Abbott et al. GW170817: Observation of Gravitational Waves from a Binary Neutron Star Inspiral. Phys. Rev. Lett., 119(16):161101, 2017. doi: 10.1103/PhysRevLett.119.161101.DOI
  2. [3]D. Adhikari et al. Accurate Determination of the Neutron Skin Thickness of ²⁰⁸Pb through Parity-Violation in Electron Scattering. Phys. Rev. Lett., 126(17):172502, 2021. doi: 10.1103/PhysRevLett.126.172502.DOI
  3. [6]G. F. Burgio, H. J. Schulze, C. D. X. and I. Vidaña. The nuclear symmetry energy and the neutron skin thickness in nuclei. Frontiers in Astronomy and Space Sciences, 11:1505560, 2024. doi: 10.3389/fspas.2024.1505560.DOI
  4. [8]J. Chadwick. Possible Existence of a Neutron. Nature, 129:312, 1932. doi: 10.1038/129312a0.DOI
  5. [9]S. Chandrasekhar. The maximum mass of ideal white dwarfs. Astrophys. J., 74:81, 1931.
  6. [11]W.-C. Chen and J. Piekarewicz. Building relativistic mean field models for finite nuclei and neutron stars. Phys. Rev., C90:044305, 2014.
  7. [12]W.-C. Chen and J. Piekarewicz. Searching for isovector signatures in the neutron-rich oxygen and calcium isotopes. Phys. Lett., B748:284, 2015.DOI
  8. [13]R. Chornock et al. The Electromagnetic Counterpart of the Binary Neutron Star Merger LIGO/VIRGO GW170817. IV. Detection of Near-infrared Signatures of r-process Nucleosynthesis with Gemini-South. Astrophys. J., 848(2):L19, 2017. doi: 10.3847/2041-8213/aa905c.DOI
  9. [14]D. Choudhury et al. A NICER View of the Nearest and Brightest Millisecond Pulsar: PSR J0437−4715. Astrophys. J. Lett., 971(1):L20, 2024. doi: 10.3847/2041-8213/ad5a6f.DOI
  10. [15]P. S. Cowperthwaite et al. The Electromagnetic Counterpart of the Binary Neutron Star Merger LIGO/Virgo GW170817. II. UV, Optical, and Near-infrared Light Curves and Comparison to Kilonova Models. Astrophys. J., 848(2):L17, 2017. doi: 10.3847/2041-8213/aa8fc7.DOI
  11. [16]H. T. Cromartie et al. Relativistic Shapiro delay measurements of an extremely massive millisecond pulsar. Nat. Astron., 4(1):72–76, 2019.
  12. [18]M. R. Drout et al. Light Curves of the Neutron Star Merger GW170817/SSS17a: Implications for R-Process Nucleosynthesis. Science, 358:1570–1574, 2017. doi: 10.1126/science.aao0049.DOI
  13. [19]H.-P. Duer. Relativistic Effects in Nuclear Forces. Phys. Rev., 103:469–480, 1956. doi: 10.1103/PhysRev.103.469.
  14. [21]F. J. Fattoyev and J. Piekarewicz. Has a thick neutron skin in ²⁰⁸Pb been ruled out? Phys. Rev. Lett., 111:162501, 2013. doi: 10.1103/PhysRevLett.111.162501.
  15. [23]E. Fonseca et al. Refined Mass and Geometric Measurements of the High-mass PSR J0740+6620. Astrophys. J. Lett., 915(1):L12, 2021. doi: 10.3847/2041-8213/ac03b8.
  16. [24]U. Garg and G. Colo. The Compression-Mode Giant Resonances and Nuclear Incompressibility. Prog. Part. Nucl. Phys., 101:55–95, 2018. doi: 10.1016/j.ppnp.2018.03.001.
  17. [25]C. J. Horowitz, E. F. Brown, Y. Kim, W. G. Lynch, R. Michaels, et al. A way forward in the study of the symmetry energy: experiment, theory, and observation. J. Phys. G, 41:093001, 2014.
  18. [26]N. M. Hugenholtz and L. Van Hove. A theorem on the single particle energy in a fermi gas with interaction. Physica, 24:363–376, 1958. doi: 10.1016/S0031-8914(58)95281-9.
  19. [27]C. B. Jackson, J. Taruna, S. L. Pouliot, B. W. Ellison, D. D. Lee, and J. Piekarewicz. Compact objects for everyone: A Real experiment. Eur. J. Phys., 26:695, 2005. doi: 10.1088/0143-0807/26/5/003.DOI
  20. [28]M. H. Johnson and E. Teller. Classical Field Theory of Nuclear Forces. Phys. Rev., 98:783–787, 1955. doi: 10.1103/PhysRev.98.783.DOI
  21. [30]J. M. Lattimer. Symmetry energy in nuclear and neutron stars. Nuclear Physics A, 928:276–295, 2014. Review article on the role of symmetry energy in nuclei and neutron stars.
  22. [31]L. Lindblom. Determining the nuclear equation of state from neutron-star masses and radii. Astrophys. J., 398:569, 1992. doi: 10.1086/171882.
  23. [32]L. Lindblom and T. Zhou. Uncertainty quantification for the relativistic inverse stellar structure problem. Phys. Rev. D, 111(6):063024, 2025. doi: 10.1103/PhysRevD.111.063024.
  24. [35]L. D. Miller et al. PSR J0030+0451 Mass and Radius from NICER Data and Implications for the Properties of Neutron Star Matter. Astrophys. J. Lett., 887:L24, 2019.
  25. [36]M. C. Miller et al. The Radius of PSR J0740+6620 from NICER and XMM-Newton Data. Astrophys. J. Lett., 918(2):L28, 2021. doi: 10.3847/2041-8213/ac089b.
  26. [38]M. Nicholl et al. The Electromagnetic Counterpart of the Binary Neutron Star Merger LIGO/VIRGO GW170817. III. Optical and UV Spectra of a Blue Kilonova From Fast Polar Ejecta. Astrophys. J., 848(2):L18, 2017.
  27. [39]Nuclear Science Advisory Committee. Reaching for the horizon: The 2015 long range plan for nuclear science. Technical report, U.S. Department of Energy and National Science Foundation, Oct. 2015.
  28. [40]Nuclear Science Advisory Committee. A new era of discovery: The 2023 long range plan for nuclear science. Technical report, U.S. Department of Energy and National Science Foundation, Oct. 2023.
  29. [41]M. E. Peskin and D. V. Schroeder. An Introduction to Quantum Field Theory. Westview Press, Boulder, Colorado, 1995. ISBN 978-0201503975.
  30. [42]J. Piekarewicz. Neutron Star Matter Equation of State, pages 1–20. Springer International Publishing, Cham, 2016.
  31. [45]B. T. Reed, F. J. Fattoyev, C. J. Horowitz, and J. Piekarewicz. Implications of PREX-II on the equation of state of neutron-rich matter. Phys. Rev. Lett., 126(17):127503, 2021. doi: 10.1103/PhysRevLett.126.172503.
  32. [46]T. E. Riley et al. A NICER View of PSR J0030+0451: Millisecond Pulsar Parameter Estimation. Astrophys. J. Lett., 887:L21, 2019. doi: 10.3847/2041-8213/ab48c1.
  33. [47]T. E. Riley et al. A NICER View of the Massive Pulsar PSR J0740+6620 Informed by Radio Timing and XMM-Newton Spectroscopy. Astrophys. J. Lett., 918(2):L27, 2021. doi: 10.3847/2041-8213/ac08a1.
  34. [48]B. D. Serot and J. D. Walecka. The relativistic nuclear many body problem. Adv. Nucl. Phys., 16:1–327, 1986.
  35. [51]M. Thiel, C. Sfienti, J. Piekarewicz, C. J. Horowitz, and M. Vanderhaeghen. Neutron skins of atomic nuclei: per aspera ad astra. J. Phys., G46(9):093003, 2019. doi: 10.1088/1361-6471/ab2c6d.

Paper details

vlnc:W_q2akscer
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents