betaFeedback

WorksPhysics and Astronomy

Decoupling Coherent and Particle-like Phonon Transport through Bonding Hierarchy in Soft Superionic Crystals

Abstract

Within the framework of the unified theory thermal transport model, the competing contributions of coherent and incoherent terms create a trade-off relationship, posing substantial challenges to achieving a reduction in overall κL\rm κ_L. In this work, we theoretically demonstrate that the superionic crystals X6_6Re6_6S8_8I8_8 (X = Rb, Cs) exhibit ultralow glass-like and particle-like thermal conductivities. The weak interactions between free alkali metal ions X+^+ (X = Rb, Cs) and I−^- anions induce pronounced lattice anharmonicity, which enhances phonon scattering and suppresses group velocities, thereby reducing the particle-like thermal conductivity (κp\rm κ_p). Concurrently, the significant bonding heterogeneity within the [Re6_6S8_8I6_6]4−^{4-} clusters promotes phonon dispersion flattening and low-frequency phonon localization. The resulting discretized phonon flat bands substantially diminish the glass-like thermal conductivity (κc\rm κ_c). At room temperature, the total κL\rm κ_L of X6_6Re6_6S8_8I8_8 (X = Rb, Cs) falls below 0.2 Wm−1^{-1}K−1^{-1}. Furthermore, the bonding characteristics between X+^+ and I−1^{-1} anions induce an anomalous cation mass-independent stiffening of low-frequency phonon branches in this system, resulting in counterintuitive thermal transport behavior. This work elucidates fundamental mechanisms governing heat transfer in ultralow κL\rm κ_L materials and establishes novel pathways for transcending conventional thermal conductivity limitations.

Within the framework of the unified theory thermal transport model, the competing contributions of coherent and incoherent terms create a trade-off relationship, posing substantial challenges to achieving a reduction in overall κL\kappa_{\mathrm{L}}. In this work, we theoretically demonstrate that the superionic crystals X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (X=Rb,Cs\mathrm{X} = \mathrm{Rb}, \mathrm{Cs}) exhibit ultralow glass-like and particle-like thermal conductivities. The weak interactions between free alkali metal ions X+\mathrm{X}^{+} (X=Rb,Cs\mathrm{X} = \mathrm{Rb}, \mathrm{Cs}) and I−\mathrm{I}^{-} anions induce pronounced lattice anharmonicity, which enhances phonon scattering and suppresses group velocities, thereby reducing the particle-like thermal conductivity (κp\kappa_{\mathrm{p}}). Concurrently, the significant bonding heterogeneity within the [Re6S8I6]4−[\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{6}]^{4-} clusters promotes phonon dispersion flattening and low-frequency phonon localization. The resulting discretized phonon flat bands substantially diminish the glass-like thermal conductivity (κc\kappa_{\mathrm{c}}). At room temperature, the total κL\kappa_{\mathrm{L}} of X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (X=Rb,Cs\mathrm{X} = \mathrm{Rb}, \mathrm{Cs}) falls below 0.2 Wm−1K−10.2\ \mathrm{Wm}^{-1}\mathrm{K}^{-1}. Furthermore, the bonding characteristics between X+\mathrm{X}^{+} and I−1\mathrm{I}^{-1} anions induce an anomalous cation mass-independent stiffening of low-frequency phonon branches in this system, resulting in counterintuitive thermal transport behavior. This work elucidates fundamental mechanisms governing heat transfer in ultralow κL\kappa_{\mathrm{L}} materials and establishes novel pathways for transcending conventional thermal conductivity limitations.

Introduction

The exploration of materials with ultralow lattice thermal conductivity κL\kappa_{\mathrm{L}} holds significant importance in both fundamental research and technological applications, such as thermal barrier coatings[1] and thermoelectrics[2]. Materials with intrinsically low κL\kappa_{\mathrm{L}}, typically governed by phonon-phonon scattering mechanisms, exhibit several distinctive features such as intrinsic rattling[3], lattice anharmonicity[4], ferroelectric instability[5], and structural complexity[6]. Based on these principles, a series of materials with low κL\kappa_{\mathrm{L}} at room temperature such as Tl3VSe4\mathrm{Tl}_{3}\mathrm{VSe}_{4} (0.30 Wm−1K−10.30\ \mathrm{Wm}^{-1}\mathrm{K}^{-1})[7], TlSe\mathrm{TlSe} (0.62 Wm−1K−10.62\ \mathrm{Wm}^{-1}\mathrm{K}^{-1})[8], and Cu12Sb4S13\mathrm{Cu}_{12}\mathrm{Sb}_{4}\mathrm{S}_{13} (0.67 Wm−1K−10.67\ \mathrm{Wm}^{-1}\mathrm{K}^{-1})[6] have been discovered. In addition, strategies like nanostructuring and entropy-driven point defect engineering can further suppress κL\kappa_{\mathrm{L}}[9]. The advent of machine learning methods has enabled efficient exploration of low κL\kappa_{\mathrm{L}} materials across vast chemical and structural spaces[10]. However, the κL\kappa_{\mathrm{L}} of crystalline materials cannot be arbitrarily low—it is fundamentally bounded[11]. To date, the experimentally measured κL\kappa_{\mathrm{L}} of crystals at room temperature has not fallen below 0.2 Wm−1K−10.2\ \mathrm{Wm}^{-1}\mathrm{K}^{-1}, the search for materials with ultralow κL\kappa_{\mathrm{L}} remains an active research frontier.

In the unified theory of lattice thermal conductivity proposed by Simoncelli et al.[12, 13], heat transport is governed by dual contributions from localized diffusons (glass-like thermal conductivity κc\kappa_{\mathrm{c}}) and propagating phonons (particle-like thermal conductivity κp\kappa_{\mathrm{p}}). Generally, in simple lattices with few atoms per primitive cell (PC), κL\kappa_{\mathrm{L}} is dominated by propagating phonons. However, in complex crystals with many atoms per PC, the contribution of localized diffusons becomes significant and cannot be neglected. For example, at 300 K300\ \mathrm{K}, PbTe\mathrm{PbTe} (2 atoms per PC) exhibits a total κL\kappa_{\mathrm{L}} of 2 Wm−1K−12\ \mathrm{Wm}^{-1}\mathrm{K}^{-1}, which is almost entirely contributed by κp\kappa_{\mathrm{p}}[14]. In contrast, the complex crystal Ag8GeS6\mathrm{Ag}_{8}\mathrm{GeS}_{6} (60 atoms per PC) demonstrates an ultralow κp\kappa_{\mathrm{p}} of merely 0.04 Wm−1K−10.04\ \mathrm{Wm}^{-1}\mathrm{K}^{-1}, which comparable to that of air, while its κc\kappa_{\mathrm{c}} reaches 0.43 Wm−1K−10.43\ \mathrm{Wm}^{-1}\mathrm{K}^{-1}, significantly exceeding κp\kappa_{\mathrm{p}}[11]. A viable strategy for discovering materials with ultralow κL\kappa_{\mathrm{L}} involves either minimizing κp\kappa_{\mathrm{p}} in simple lattices or suppressing κc\kappa_{\mathrm{c}} in complex crystal structures. For the former case, Zeng et al. identified AgTlI2\mathrm{AgTlI}_{2} (I4/mcm\mathrm{I4/mcm}) as a rare simple crystalline system simultaneously exhibiting low κp\kappa_{\mathrm{p}} and suppressed κc\kappa_{\mathrm{c}}[11], achieving an unprecedented room-temperature κL\kappa_{\mathrm{L}} of 0.25 Wm−1K−10.25\ \mathrm{Wm}^{-1}\mathrm{K}^{-1}. For the latter case (complex crystals), whether materials with intrinsically low κc\kappa_{\mathrm{c}} exist remains an open fundamental question in thermal transport physics.

COMPUTATIONAL METHODS

All first-principles calculations were performed using the Vienna Ab Initio Simulation Package (VASP)[19], based on density functional theory (DFT)[20, 21]. The projector augmented wave (PAW) method[22] with a plane-wave basis set was employed to describe ion-electron interactions, while exchange-correlation effects were treated within the revised Perdew-Burke-Ernzerhof functional optimized for solids (PBEsol)[23]. A plane-wave energy cutoff of 520 eV520\ \mathrm{eV} was imposed throughout the calculations. Structural relaxations utilized a 6×6×66 \times6 \times6 Monkhorst-Pack k-mesh for Brillouin zone sampling, with convergence thresholds of 10−8 eV10^{-8}\ \mathrm{eV} for energy and 10−4 eV/A˚10^{-4}\ \mathrm{eV}/\mathring{\mathrm{A}} for atomic forces. Born effective charge tensors and dielectric constants were computed via density functional perturbation theory (DFPT)[24], incorporating nonanalytic corrections to the dynamical matrix. To determine interatomic force constants (IFCs), we conducted ab initio molecular dynamics (AIMD) simulations in the NVT ensemble using a 2×2×22 \times2 \times2 supercell containing 224 atoms. The system was equilibrated for 20 ps with a timestep of 1 fs. Temperature-dependent effective potential (TDEP) methodology[25] was subsequently applied to extract second-, third-, and fourth-order IFCs at varying temperatures, employing cutoff radii of 8 Å, 6 Å, and 4 Å respectively. These cutoff values ensured comprehensive inclusion of atomic interactions governing the material’s dynamical response.

Within the Wigner formalism, the lattice thermal conductivity tensor κLαβ\kappa_{\mathrm{L}}^{\alpha\beta} decomposes into two contributions:

κLαβ=κpαβ+κcαβ,(1)\kappa_{\mathrm{L}}^{\alpha\beta} = \kappa_{\mathrm{p}}^{\alpha\beta} + \kappa_{\mathrm{c}}^{\alpha\beta}, \tag*{(1)}

where the particle-like term κpαβ\kappa_{\mathrm{p}}^{\alpha\beta} describes semiclassical phonon transport:

κpαβ=1NqV∑qsCqsvq,αsvq,βsτqs.(2)\kappa_{\mathrm{p}}^{\alpha\beta} = \frac{1}{N_{\mathrm{q}}V}\sum_{\mathbf{q}s} C_{\mathbf{q}}^{s} v_{\mathbf{q},\alpha}^{s} v_{\mathbf{q},\beta}^{s} \tau_{\mathbf{q}}^{s}. \tag*{(2)}

Here, Cqs=ℏωqs∂nqs/∂TC_{\mathbf{q}}^{s} = \hbar\omega_{\mathbf{q}}^{s}\partial n_{\mathbf{q}}^{s}/\partial T denotes the mode-resolved heat capacity, with nqsn_{\mathbf{q}}^{s} being the Bose–Einstein distribution. The coherence contribution κcαβ\kappa_{\mathrm{c}}^{\alpha\beta} captures wave-like tunneling effects between distinct phonon branches ss and s′s':

κcαβ=ℏ2kBT2VNq∑q∑s≠s′ωqs+ωqs′2vq,αs,s′vq,βs′,s×ωqsnqs(nqs+1)+ωqs′nqs′(nqs′+1)4(ωqs−ωqs′)2+(Γqs+Γqs′)2(Γqs+Γqs′).(3)\kappa_{\mathrm{c}}^{\alpha\beta} = \frac{\hbar^{2}}{k_{\mathrm{B}}T^{2}VN_{\mathrm{q}}}\sum_{\mathbf{q}}\sum_{s\ne s'}\frac{\omega_{\mathbf{q}}^{s}+\omega_{\mathbf{q}}^{s'}}{2}v_{\mathbf{q},\alpha}^{s,s'}v_{\mathbf{q},\beta}^{s',s}\times\frac{\omega_{\mathbf{q}}^{s}n_{\mathbf{q}}^{s}(n_{\mathbf{q}}^{s}+1)+\omega_{\mathbf{q}}^{s'}n_{\mathbf{q}}^{s'}(n_{\mathbf{q}}^{s'}+1)}{4(\omega_{\mathbf{q}}^{s}-\omega_{\mathbf{q}}^{s'})^{2}+(\Gamma_{\mathbf{q}}^{s}+\Gamma_{\mathbf{q}}^{s'})^{2}}(\Gamma_{\mathbf{q}}^{s}+\Gamma_{\mathbf{q}}^{s'}). \tag*{(3)}

where vq,αs,s′v_{\mathbf{q},\alpha}^{s,s'} represents the interband velocity matrix element. The Cartesian indices α,β∈{x,y,z}\alpha,\beta\in\{x,y,z\} span spatial dimensions, VV is the unit cell volume, and NqN_{\mathbf{q}} enumerates sampled phonon wavevectors in the Brillouin zone. Scattering rates Γqs\Gamma_{\mathbf{q}}^{s} quantify phonon lifetime broadening. This dual formulation reconciles semiclassical transport (κp\kappa_{\mathrm{p}}) with quantum coherence effects (κc\kappa_{\mathrm{c}}), particularly significant in materials exhibiting phonon branch degeneracies or strong anharmonicity. The κLαβ\kappa_{\mathrm{L}}^{\alpha\beta} was computed using an in-house modified version of the FourPhonon code[26, 27, 28, 29], incorporating three- and four-phonon scattering processes, and performed in a qq-mesh of 10×10×1010 \times10 \times10.

Results and discussions

The superionic crystals X6_6Re6_6S8_8I8_8 (X = Rb, Cs) adopt a cubic 0D perovskite structure[18], with Rb6_6Re6_6S8_8I8_8 having been experimentally synthesized[30]. As shown in Figure 1(a), X6_6Re6_6S8_8I8_8 crystallizes in the space group Fm3ˉmFm\bar{3}m, comprising alkali metal ions (X+^{+}), iodide ions (I−^{-}), and discrete [Re6_6S8_8I6_6]4−^{4-} clusters. The [Re6_6S8_8I6_6]4−^{4-} cluster (Figure 1(b)) serves as the fundamental building unit, featuring an octahedral Re6_6 core stabilized by direct metal-metal bonds (Re-Re: 2.60 A˚\mathring{A}). Each face of the Re6_6 octahedron is capped by a sulfur atom in μ3\mu_3 coordination (Re-S: 2.41 A˚\mathring{A}), forming a [Re6_6S8_8]2+^{2+} core. Peripheral iodides coordinate to the octahedron through Re-I bonds (2.76 A˚\mathring{A}), completing the [Re6_6S8_8I6_6]4−^{4-} cluster. Alkali metal atoms (X) occupy interstitial sites between clusters, exhibiting weak X-I interactions (Rb-I: 3.94 A˚\mathring{A}) that stabilize the crystal framework. Additional X-I-X bridging motifs (Rb-I: 3.88 A˚\mathring{A}) fill structural voids, forming ionic coordination networks. Optimized structural parameters for Rb6_6Re6_6S8_8I8_8 (Re-Re: 2.60 A˚\mathring{A}, Re-S: 2.40 A˚\mathring{A}, Re-I: 2.77 A˚\mathring{A}) show agreement with experimental data[30]. Detailed structural parameters for both Rb and Cs analogs are provided in Table S1 (see supplementary information). The system exemplifies a rattling model, where X atoms (Rb/Cs) behave as loosely bound ”rattler” guests within the rigid [Re6_6S8_8I6_6]4−^{4-} host framework.

Crystal structure, isolated cluster, and lattice thermal conductivities

Figure 1. (a)The crystal structure of X6_6Re6_6S8_8I8_8 (X = Rb, Cs); (b) The Isolated [Re6_6S8_8I6_6]4−^{4-} cluster; (c) The total lattice thermal conductivities (κL\kappa_{\mathrm{L}}), the particle-like lattice thermal conductivities (κp\kappa_{\mathrm{p}}) and the glass-like lattice thermal conductivities (κc\kappa_{\mathrm{c}}) of X6_6Re6_6S8_8I8_8 (X = Rb, Cs) from 100K to 900K.

The electronic structures of X6_6Re6_6S8_8I8_8 are presented in Fig. S1. Both Rb6_6Re6_6S8_8I8_8 and Cs6_6Re6_6S8_8I8_8 exhibit indirect bandgap semiconductor behavior, with valence band maxima (VBM) at the Γ\Gamma-point and conduction band minima (CBM) at the LL-point, yielding bandgaps (EgE_{\mathrm{g}}) of 2.42 eV and 2.45 eV, respectively. Atomic projected electronic density of states (EDOS) analysis reveals dominant contributions from S and I atomic orbitals near the VBM, while Re atomic orbitals primarily constitute the CBM. To assess thermal stability, we performed 20 ps NVT-ensemble AIMD simulations at varying temperatures (see Fig. S2).

Remarkably, both compounds maintain structural integrity up to 800 K, evidenced by minimal fluctuations in total energy. Phonon dispersion calculations within the harmonic approximation confirm dynamical stability, showing no imaginary frequencies across the Brillouin zone (Fig. S3). This stability persists under finite-temperature conditions as validated by TDEP calculations up to 800 K. Notably, temperature evolution induces distinct phonon renormalization: mid-to-high-frequency optical branches soften with increasing temperature, whereas low-frequency optical modes exhibit hardening behavior. This anomalous temperature dependence correlates with atomic vibration patterns – mid/high-frequency modes predominantly involve Re-S framework vibrations, while low-frequency modes arise from I-Rb/I-Cs interactions. The hardening of low-frequency optical branches suggests enhanced anharmonic coupling between Rb+\mathrm{Rb}^{+} and I−\mathrm{I}^{-} ionic bonds at elevated temperatures.

The cage-like crystal structure of X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (X=Rb, Cs\mathrm{X}=\mathrm{Rb},\ \mathrm{Cs}) engenders distinctive thermal transport characteristics[31]. Figure 1(c) presents the temperature-dependent κL\kappa_{\mathrm{L}} (κL=κp+κc\kappa_{\mathrm{L}}=\kappa_{\mathrm{p}}+\kappa_{\mathrm{c}}) decomposition, revealing particle-like κp\kappa_{\mathrm{p}} and coherent κc\kappa_{\mathrm{c}} contributions. At 300 K, Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} and Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} exhibit ultralow κL\kappa_{\mathrm{L}} values of 0.19 and 0.17 W m−1^{-1} K−1^{-1}, respectively, surpassing recently reported ultralow κL\kappa_{\mathrm{L}} materials including Ag8GeTe6\mathrm{Ag}_{8}\mathrm{GeTe}_{6} and AgTlI2\mathrm{AgTlI}_{2}, as well as conventional thermoelectric materials (see Table I). Notably, both compounds demonstrate weak temperature dependence with κL∝T−0.51\kappa_{\mathrm{L}}\propto T^{-0.51} (Cs) and T−0.49T^{-0.49} (Rb), signaling strong lattice anharmonicity. The particle contribution dominates the thermal transport, accounting for 90.2% (Cs) and 87.9% (Rb) of κL\kappa_{\mathrm{L}} at 300 K. This hierarchy suggests that diffusive phonon transport governs heat conduction in these superionic crystals. Intriguingly, the heavier Cs analog exhibits higher κL\kappa_{\mathrm{L}} than its Rb counterpart – a mass dependence reversal contradicting conventional Slack formalism predictions[32, 33]. Structural analysis (SI Table 1) reveals significant lattice parameter and bond length variations between the analogs. These structural distinctions likely modify interatomic force constants, thereby altering phonon scattering phase space.

MaterialC11C_{11}C12C_{12}C44C_{44}BBGGEE
Rb6_6Re6_6S8_8I8_814.547.755.3610.014.5811.91
Cs6_6Re6_6S8_8I8_816.695.556.119.275.9014.59

Table I. The elastic constants (CijC_{ij}), the bulk modulus (BB), shear modulus (GG), Young’s modulus (YY), and average wave velocity (vv) of X6_6Re6_6S8_8I8_8, unit in GPa.

For cubic symmetry systems, the independent elastic tensor components reduce to C11C_{11}, C12C_{12}, and C44C_{44}, as presented in Table I. The elastic anisotropy factor (AA), characterizing mechanical property variations along different crystallographic directions, is defined as: A=2C44C11−C12A=\frac{2C_{44}}{C_{11}-C_{12}}. Our calculations yield A=1.58A=1.58 for Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} and A=1.10A=1.10 for Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, both approaching unity, indicative of quasi-isotropic mechanical behavior. Notably, the larger anisotropy in Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} suggests directional constraints in phonon propagation that may enhance scattering processes. Comparative analysis of elastic moduli reveals weaker interatomic bonding and a more loosely packed structure in Rb6_6Re6_6S8_8I8_8, as evidenced by its lower elastic modulus. This structural characteristic correlates with enhanced lattice anharmonicity, which restricts phonon transport velocities. Supporting this interpretation, Table II demonstrates substantially reduced sound velocities in Rb6_6Re6_6S8_8I8_8 compared to its cesium counterpart. Significantly, the X6_6Re6_6S8_8I8_8 system exhibits a remarkably low κL\kappa_\mathrm{L} comparable to traditional thermoelectric materials, suggesting promising potential for energy conversion applications.

MaterialSound velocity vv (m s−1^{-1})κL\kappa_\mathrm{L} (W m−1^{-1}K−1^{-1})
Rb6_6Re6_6S8_8I8_8 (this work)1040.780.17
Ag8_8GeTe6_610990.25
Cs6_6Re6_6S8_8I8_8 (this work)1163.060.19
Ag8_8SnSe6_6†14940.36
Cu8_8GeSe6_6†17930.3
PbSe†18051.5
PbTe†18141.9

Table II. Comparative sound velocities (vv) and lattice thermal conductivities at 300 K

† Values from literature references [34, 35]

To elucidate the origin of the low lattice thermal conductivity κL\kappa_\mathrm{L} in X6_6Re6_6S8_8I8_8 compounds, we take Rb6_6Re6_6S8_8I8_8 as a prototype system. Figure 2(a) displays the projected phonon group velocities vgv_\mathrm{g} along the phonon dispersion at 300 K. The phonon dispersion exhibits remarkable flatness across the entire frequency spectrum, particularly in optical branches, indicating spatially localized vibrational modes that hinder efficient energy propagation. All phonon modes demonstrate exceptionally low vgv_g, with maximum values below 2 km s−1^{-1} and majority below 0.5 km s−1^{-1}, signifying sluggish heat transfer kinetics. The projected phonon eigenvectors in Figure 2(b) reveal distinct vibrational characteristics: acoustic branches primarily involve I atoms, while low-frequency optical branches (<2.5 THz) arise from coupled vibrations of Rb and I atoms. Notably, these low-frequency modes (<2.5 THz) dominate thermal transport, suggesting significant contributions from Rb–I vibrations to

Phonon dispersion, projected phonon dispersion, electronic localization function, and second-order force constants

Figure 2. (a) The phonon dispersion of Rb6_6Re6_6S8_8I8_8 at 300 K with group velocities vgv_g projection; (b) The projected phonon dispersion with atomic projection of Rb6_6Re6_6S8_8I8_8 at 300 K; (c) The electronic localization function (ELF) corresponding to the (0,1,1), (1,2,1), and (-1,2,-1) planes of Rb6_6Re6_6S8_8I8_8; (d) The norm of the second-order force constants ∣Φ2∣|\Phi_2| for the top three strongest bonds in X6_6Re6_6S8_8I8_8 (X = Rb, Cs). The center is the results of the relative value of the norm of the ∣Φ2∣|\Phi_2| in X6_6Re6_6S8_8I8_8 (X = Rb, Cs).

κL\kappa_{\mathrm{L}}. Both phonon dispersion and group velocity characteristics correlate strongly with interatomic bonding environments. Figure 2(c) and Fig. S4 present the electron localization function (ELF) analysis, complemented by Bader charge calculations in Table III. Clearly, two distinct iodine species emerge: (1) Covalent I1\mathrm{I}_{1} within the [Re6S8I6]4−[\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{6}]^{4-} octahedral clusters shows moderate electron localization (ELF ≈0.5\approx0.5) with incomplete charge transfer from Re, and (2) Ionic I exhibits negligible electron localization (ELF ≈0\approx0). The [Re6S8I6]4−[\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{6}]^{4-} clusters maintain partial covalent bonding (Re–S/I ELF ≈0.5\approx0.5), while Rb atoms demonstrate complete electron transfer (ELF ≈0\approx0) characteristic of ionic bonding. This dual bonding architecture – stable covalent clusters interspersed with ionic Rb+\mathrm{Rb}^{+} and I−\mathrm{I}^{-} species – creates weakly bonded structural frameworks. The resulting soft inter-cluster interactions promote extensive phonon band flattening, particularly in optical branches, ultimately suppressing κL\kappa_{\mathrm{L}} through enhanced phonon scattering and reduced phonon group velocities.

ElementFormal chargeBader effective charge
X = RbX = Cs
Rb/Cs+10.8360.999
Re+30.7840.603
S-2-0.668-0.648
I1\mathrm{I}_{1}-1-0.480-0.456
I2\mathrm{I}_{2}-1-0.751-0.850

Table III. Bader effective charges of constituent atoms in X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (X = Rb, Cs), unit in e−\mathrm{e}^{-}.

The strength of interatomic interactions can be characterized through force constants. Figure 2(d) displays the second-order average interaction force constants (∣Φ2∣|\Phi_{2}|) between key atomic pairs. Both Re–S and Re–I1 pairs exhibit large ∣Φ2∣|\Phi_{2}|, confirming the formation of stable [Re6S8I6]4−[\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{6}]^{4-} octahedral clusters. In contrast, the weak interactions between alkali metal cations X+\mathrm{X}^{+} and ionic I−\mathrm{I}^{-} suggest that X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} can be viewed as mobile X+\mathrm{X}^{+} cations and ionic I2−\mathrm{I}_{2}^{-} species within the rigid [Re6S8I6]4−[\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{6}]^{4-} framework. To explicitly demonstrate the origin of phonon band flattening, we reconstructed phonon spectra by selectively retaining specific interatomic force constants, as shown in Figure 3(a-Figure 3c). Notably, all retained interactions produce exceptionally flat phonon dispersions except for Re–S-derived optical branches above 10 THz, where stronger bonding induces greater dispersion. Figure 3(d) illustrates characteristic optical phonon modes across frequency domains at Γ\Gamma point. The low-frequency modes primarily correspond to the relative vibrations between Rb and I, the mid-frequency modes are attributed to the vibrations of I relative to the [Re6S8I6]4−[\mathrm{Re}_6\mathrm{S}_8\mathrm{I}_6]^{4-} cluster, and the high-frequency modes arise from the internal atomic vibrations within the [Re6S8I6]4−[\mathrm{Re}_6\mathrm{S}_8\mathrm{I}_6]^{4-} cluster. This mode localization hierarchy directly correlates with the hierarchy of bonding strengths revealed by ∣Φ2∣|\Phi_2| analysis.

Phonon dispersions and visualizations of phonon modes

Figure 3. (a) The phonon dispersion between Rb and I, (b) between Rb and S, and (c)between Re and S for Rb6_6Re6_6S8_8I8_8 at 300 K. The visualization of phonon mode at point in (e) low-frequency ω\omega=0.87 THz, (f) low-medium-frequency ω\omega=3.47 THz, and (g) high-frequency ω\omega=8.08 THz optical branches.v is the v-th phonon branch.

Figure 4(a,Figure 4b) presents the potential energy curves for atomic displacements along the aa-axis in X6_6Re6_6S8_8I8_8(X = Rb, Cs). The steepest potential energy curves correspond to Re and S atoms, indicating strong resistance to displacement from their local environments. In contrast, remarkably flat potential energy curves are observed for X and I2 atoms, suggesting their high mobility within the lattice. The overall lattice anharmonicity primarily stems from the motion of X and I atoms. Notably, the potential energy landscapes surrounding each atom type in Rb6_6Re6_6S8_8I8_8 and Cs6_6Re6_6S8_8I8_8 exhibit nearly identical chemical environments. Figure 4(c,Figure 4d) display the diffusion coefficients at 300 K, revealing that X and I atoms exhibit diffusion coefficients (DD) more than twice as large as those of Re and S atoms. This further confirms the loosely bound nature of Rb and I atoms moving between [Re6S8I6]4−[\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{6}]^{4-} clusters, while Re and S atoms remain constrained within the clusters. The temperature-dependent mean square displacements (MSDs) are shown in Figure 4(e,Figure 4f). All atoms demonstrate increased MSDs at higher temperatures, with X and I2\mathrm{I}_{2} atoms showing particularly large displacements in xx, yy, and zz directions. Interestingly, I1 exhibits anisotropic behavior - small MSD along xx-direction but large along yy and zz-directions, reflecting distinct chemical environments. Compared with Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, the Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} compound demonstrates greater temperature-induced variations in MSDs, consistent with its softer lattice dynamics as evidenced by sound velocity and ∣Φ2∣|\Phi_{2}| analysis.

Potential energy, diffusion coefficient, and temperature-dependent atomic mean square displacement plots for Rb₆Re₆S₈I₈ and Cs₆Re₆S₈I₈

Figure 4. The potential energy as a function of the atomic displacement of (a) Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, and (b) Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} along the a-direction. The diffusion coefficient of (c) Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, and (d) Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (d) at 300 K. The temperature-dependent atomic mean square displacements (MSD) of (e) Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, and (f) Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (f).

As shown in Figure 5(b) and Fig. S6(b), the calculated differential and cumulative κp\kappa_{\mathrm{p}} of X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} (X=Rb\mathrm{X} = \mathrm{Rb}, Cs\mathrm{Cs}) at 300 K is derived using temperature-dependent force constants.

Four-panel plots of phonon lifetimes and thermal conductivity

Figure 5. (a) The phonon lifetimes of the 3ph and 4ph as a function of phonon frequencies for Rb6_6Re6_6S8_8I8_8 at 300 K. Where the Ioffe-Regel (τIoffe−Regel=1ω\tau_{\mathrm{Ioffe-Regel}} = \frac{1}{\omega}) and Wigner (τWigner=1Δωavg\tau_{\mathrm{Wigner}} = \frac{1}{\Delta\omega_{\mathrm{avg}}}) limits are represented by dotted yellow lines and green lines. (b) Calculated cumulative and differential κp\kappa_{\mathrm{p}} as a function of phonon frequencies for Rb6_6Re6_6S8_8I8_8 at 300 K. (c) Calculated cumulative and differential κc\kappa_{\mathrm{c}} as a function of phonon frequencies for X6_6Re6_6S8_8I8_8 at 300 K. (d) The resolved κc\kappa_{\mathrm{c}} associated with various pairs of phonon frequencies (ωs\omega_{\mathrm{s}} and ωs′\omega_{\mathrm{s}}^{\prime}).

The particle-like thermal conductivity component κp3ph\kappa_{\mathrm{p}}^{3\mathrm{ph}} for Rb6_6Re6_6S8_8I8_8 and Cs6_6Re6_6S8_8I8_8 under pure three-phonon (3ph) scattering are 0.17 and 0.18 W m−1^{-1} K−1^{-1}, respectively. Upon inclusion of four-phonon (4ph) scattering, the κp3ph+4ph\kappa_{\mathrm{p}}^{3\mathrm{ph}+4\mathrm{ph}} values decrease to 0.15 and 0.17 W m−1^{-1} K−1^{-1}, with the Rb-analogue exhibiting a reduction exceeding 10%, indicating the non-negligible contribution of four-phonon scattering. The κp3ph+4ph\kappa_{\mathrm{p}}^{3\mathrm{ph}+4\mathrm{ph}} values of X6_6Re6_6S8_8I8_8 are significantly lower than those of other superionic crystals, e.g., the reported κp3ph+4ph\kappa^{3\mathrm{ph}+4\mathrm{ph}}_{\mathrm{p}} is 0.32 W m−1^{-1} K−1^{-1} for Re6_6Se8_8Cl2_2[36]. This reduction can be attributed to the structural complexity of the primitive cell. Specifically, Rb6_6Re6_6S8_8I8_8 exhibits a more complex primitive cell containing 28 atoms[37], compared to only 16 atoms in Re6_6Se8_8Cl2_2. The κp\kappa_{\mathrm{p}} generally decreases with increasing number of atoms per primitive cell, as exemplified by Ag9_9GaS6_6 containing 56 atoms per primitive cell, which exhibits an ultralow κp=0.031\kappa_{\mathrm{p}} = 0.031 W⋅\cdotm−1⋅^{-1}\cdotK−1^{-1}[38]. This negative correlation arises from enhanced phonon scattering channels in systems with larger primitive cells.

Figure 5(b) reveals two distinct growth regions of κp3ph+4ph\kappa_{\mathrm{p}}^{3\mathrm{ph}+4\mathrm{ph}} in Rb6_6Re6_6S8_8I8_8: a low-frequency regime (0–0.8 THz) contributing 83% of the total thermal conductivity, dominated by acoustic branches and the three lowest-frequency optical branches, followed by a low-frequency regime (0.8–1.7 THz) contributing 11% from low-lying optical modes. A similar frequency dependence is observed in Cs6_6Re6_6S8_8I8_8, where phonons below 2.5 THz account for 95% of κp3ph+4ph\kappa_{\mathrm{p}}^{3\mathrm{ph}+4\mathrm{ph}}. The phonon lifetime (τ\tau) distributions at 300 K, presented in Figure 5(a) and Supplementary Fig. S6(a), demonstrate significant four-phonon scattering effects. Most phonons exhibit lifetimes below 10 ps, coupled with low group velocities, collectively suppressing κp\kappa_{\mathrm{p}}. In contrast, low-frequency phonons maintain extended lifetimes (>10>10 ps) and higher group velocities, leading to their dominant contributions to κp\kappa_{\mathrm{p}}.

Within the framework of the unified lattice thermal transport theory[12, 13], the structural complexity of crystals inherently generates substantial off-diagonal thermal conductivity components κc\kappa_{\mathrm{c}} arising from wave-like phonon tunneling. As shown in Figure 5(a) and S6(a), phonon modes with lifetimes exceeding the Wigner limit (τ>Δωavg−1\tau> \Delta\omega_{\mathrm{avg}}^{-1}) predominantly contribute to the particle-like thermal conductivity κp\kappa_{\mathrm{p}}, while those with lifetimes between the Wigner and Ioffe-Regel limits (ω−1<τ<Δωavg−1\omega^{-1} < \tau< \Delta\omega_{\mathrm{avg}}^{-1}) primarily govern the wave-like tunneling component κc\kappa_{\mathrm{c}}. Here, Δωavg\Delta\omega_{\mathrm{avg}} is the average phonon band spacing, defined as Δωavg=ωmax⁡3N\Delta\omega_{\mathrm{avg}} = \frac{\omega_{\max}}{3N}, ωmax⁡\omega_{\max} is the highest phonon frequency, and N is the number of atoms in the primitive cell. In the inclusion of 4ph scattering significantly reduces phonon lifetimes in Rb6_6Re6_6S8_8I8_8, driving numerous optical branches into the wave-like tunneling regime, which results in a pronounced reduction in κp3ph+4ph\kappa_{\mathrm{p}}^{3\mathrm{ph}+4\mathrm{ph}}. Despite the abundance of phonon modes in the wave-like tunneling regime, their contributions to κc\kappa_{\mathrm{c}} remain negligible due to the predominance of mid- to high-frequency optical modes characterized by flat phonon dispersion and large frequency gaps. This is quantitatively demonstrated in Figure 5(c) and S6(c), which present the frequency-resolved cumulative κc\kappa_{\mathrm{c}} spectrum, its differential contribution, and atom-projected phonon

density of states (DOS) at 300 K. Both Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} and Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} exhibit remarkably small κc\kappa_{c} values of 0.02 and 0.018 W⋅m−1⋅K−1\mathrm{W}\cdot\mathrm{m}^{-1}\cdot\mathrm{K}^{-1}, respectively, constituting only 12% and 10% of their total lattice thermal conductivity. The primary κc\kappa_{c} contributions in Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} originate from phonon modes below 2.5 THz, as evidenced by three distinct spectral peaks. To elucidate their origins, Figure 5(d) maps the pairwise frequency combinations (ωs,ωs′)(\omega_{s},\omega_{s}^{\prime}) contributing to κc\kappa_{c}. The three peaks respectively arise from interactions between: (i) acoustic and the lowest optical branches, (ii) acoustic and low-lying optical branches, and (iii) low-lying optical branches themselves. DOS analysis reveals these spectral features predominantly stem from vibrations involving Rb and I atoms. Notably, high-frequency optical modes above 11 THz exhibit non-negligible κc\kappa_{c} contributions due to their dispersive phonon band structures and strong mode hybridization. While Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} shows similar κc\kappa_{c} characteristics, so it will not be discussed repeatedly.

A notable thermal transport anomaly emerges in X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}: Despite heavier atomic mass, Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} exhibits lower lattice thermal conductivity than Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}. Mass perturbation tests reveal negligible κL\kappa_{L} change (ΔκL≈0.001\Delta\kappa_{L}\approx0.001 Wm−1K−1\mathrm{W}\mathrm{m}^{-1}\mathrm{K}^{-1}) when replacing Rb mass with Cs in Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, indicating dominant interatomic interaction effects. Figure 2(d) reveals minimal changes in Φ2(Re\Phi_{2}(\mathrm{Re}-S)\mathrm{S}) and Φ2(Re\Phi_{2}(\mathrm{Re}-I1)\mathrm{I1}) from Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} to Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, while Φ2(Re\Phi_{2}(\mathrm{Re}-I2)\mathrm{I2}) decreases by 9.7%. In contrast, Φ2(Cs\Phi_{2}(\mathrm{Cs}-I1)\mathrm{I1}) and Φ2(Cs\Phi_{2}(\mathrm{Cs}-I2)\mathrm{I2}) increase by 16.5% and 23.6% compared to Φ2(Rb\Phi_{2}(\mathrm{Rb}-I1)\mathrm{I1}) and Φ2(Rb\Phi_{2}(\mathrm{Rb}-I2)\mathrm{I2}), respectively. As Re-I1 interactions mainly affect mid-frequency optical branches with negligible κL\kappa_{L} contribution, the anomaly originates from enhanced X-I interactions. Bader charge analysis confirms stronger ionic bonding in Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8}, with greater charge transfer between Cs and I2. X-I interactions predominantly modify acoustic and low-frequency optical branches (Figure 6(a,Figure 6b)). Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} displays a small bandgap near 0.8 THz, flattening the lowest three optical branches and reducing phonon group velocities below 1 THz (Figure 6(c)). Substituting Φ2(Cs\Phi_{2}(\mathrm{Cs}-I)\mathrm{I}) in Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} with Φ2(Rb\Phi_{2}(\mathrm{Rb}-I)\mathrm{I}) softens phonon spectra (Fig. S7). Weaker Rb-I interactions enhance anharmonicity, evidenced by higher CvC_{v} and ∣γ∣|\gamma| values in Rb6Re6S8I8\mathrm{Rb}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} compared to Cs6Re6S8I8\mathrm{Cs}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} at identical temperatures (Figure 6(d)).

Low-frequency atomic projected phonon dispersion, phonon group velocities, Grüneisen parameter, and heat capacity

Figure 6. The low-frequency atomic projected phonon dispersion of (a) Rb6_6Re6_6S8_8I8_8, and (b) Cs6_6Re6_6S8_8I8_8 at 300 K. (c) The phonon group velocities as functions of thephonon frequency for X6_6Re6_6S8_8I8_8 (X = Rb, Cs) at 300 K. (d) The gruneisen parameter (∣γ∣|\gamma|) and the heat capacity (CvC_\mathrm{v}) for X6_6Re6_6S8_8I8_8 (X = Rb, Cs) at 300 K.

The coexistence of ultralow particle-like κp\kappa_{p} and wave-like κc\kappa_{c} in X6Re6S8I8\mathrm{X}_{6}\mathrm{Re}_{6}\mathrm{S}_{8}\mathrm{I}_{8} represents a rare phenomenon in crystalline materials. While complex crystal structures generally exhibit suppressed κp\kappa_{p} through enhanced phonon scattering (due to increased number of atoms in PC and Brillouin zone folding effects), excessive structural complexity may paradoxically enhance κc\kappa_\mathrm{c}. For instance, skutterudite YbFe4_4Sb12_{12} (17 atoms in PC)[39] shows κp\kappa_\mathrm{p} = 0.83 W m−1^{-1} K−1^{-1}, and Bi4_4O4_4SeCl2_2 (22 atoms in PC)[40] achieves κp\kappa_\mathrm{p} = 0.23 W m−1^{-1} K−1^{-1}. However, further increasing crystal complexity (e.g., Cu7_7PS6_6 with 56 atoms/primitive cell[38]) reduces the average phonon band spacing Δωavg\Delta\omega_\mathrm{avg}, leading to non-negligible κc\kappa_\mathrm{c} contributions exceeding 87%. Figure 7 maps the room-temperature κp\kappa_\mathrm{p} and κc\kappa_\mathrm{c} values against primitive cell atom counts for various materials. Although X6_6Re6_6S8_8I8_8 (28 atoms in PC) does not exhibit the lowest κp\kappa_\mathrm{p}, its unique combination of high symmetry, moderate anharmonicity,

Potential pathways for pushing lattice thermal conductivity to its lower limit in inorganic materials

Figure 7. Potential pathways for pushing κ\kappa to its lower limit in inorganic materials. The dashed red line represents the current protocol to find materials with lower thermal conductivity. Lattice thermal conductivities are extracted from previous studies based on unified theory[11, 12, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49].

and distinctive phonon flat bands which arising from bonding heterogeneity and guest-host architecture, enables unprecedented suppression of κc\kappa_{\mathrm{c}} (<0.02< 0.02 W m−1^{-1} K−1^{-1}). This contrasts with systems like AgTl2_2I [11] where balanced κp/κc\kappa_{\mathrm{p}}/\kappa_{\mathrm{c}} contributions (∼\sim50% each) yield κL=0.25\kappa_{\mathrm{L}} = 0.25 W·m−1^{-1}·K−1^{-1}, demonstrating the critical role of selective phonon engineering in achieving ultralow thermal conductivity.

Conclusion

In conclusion, based on the unified theory of lattice thermal transport, we have demonstrated that the superionic crystals Rb6_6Re6_6S8_8I8_8 and Cs6_6Re6_6S8_8I8_8 achieve ultralow lattice thermal conductivity κL\kappa_{\mathrm{L}} of 0.17 and 0.19 W m−1^{-1} K−1^{-1} at 300 K, respectively, with weak temperature dependence. This exceptional behavior stems from their unique hierarchi-

Acknowledgments

This research was supported by the National Natural Science Foundation of China under Grants No. 12204402, 12304038, and the Scientific Research Foundation for Doctor of Jiangxi University of Science and Technology (jxxjbs18044); the Science and Technology Plan Project of Yingtan (202412-18904); Jiangxi Key Laboratory of Advanced Copper-based Materials (2024SSY05021).

† [email protected]

‡ [email protected]

References

References

  1. [1]1 Nitin P Padture, Maurice Gell, and Eric H Jordan. Thermal barrier coatings for gas-turbine engine applications. Science, 296(5566):280–284, 2002.pubmed.ncbi.nlm.nih.gov/11951028
  2. [2]2 Jian He and Terry M Tritt. Advances in thermoelectric materials research: Looking back and moving forward. Science, 357(6358):eaak9997, 2017.DOI
  3. [3]3 Mogens Christensen, Asger B Abrahamsen, Niels B Christensen, Fanni Juranyi, Niels H Andersen, Kim Lefmann, Jakob Andreasson, Christian RH Bahl, and Bo B Iversen. Avoided crossing of rattler modes in thermoelectric materials. Nat. Mater., 7(10):811–815, 2008.
  4. [4]Bingchao Qin, Dongyang Wang, Xixi Liu, Yongxin Qin, Jin-Feng Dong, Jiangfan Luo, Jing-Wei Li, Wei Liu, Gangjian Tan, Xinfeng Tang, et al. Power generation and thermoelectric cooling enabled by momentum and energy multiband alignments. Science, 373(6554):556–561, 2021.DOI
  5. [5]Debattam Sarkar, Tanmoy Ghosh, Subhajit Roychowdhury, Raagya Arora, Sandra Sajan, Goutam Sheet, Umesh V Waghmare, and Kanishka Biswas. Ferroelectric instability induced ultralow thermal conductivity and high thermoelectric performance in rhombohedral p-type GeSe crystal. J. Am. Chem. Soc., 142(28):12237–12244, 2020.DOI
  6. [6]Yi Xia, Vidvuds Ozoliņš, and Chris Wolverton. Microscopic mechanisms of glasslike lattice thermal transport in cubic Cu₁₂Sb₄S₁₃ tetrahedrites. Phys. Rev. Lett., 125:085901, Aug 2020.DOI
  7. [7]Saikat Mukhopadhyay, David S Parker, Brian C Sales, Alexander A Puretzky, Michael A McGuire, and Lucas Lindsay. Two-channel model for ultralow thermal conductivity of crystalline Tl₃VSe₄. Science, 360(6396):1455–1458, 2018.DOI
  8. [8]Moinak Dutta, Shidaling Matteppanavar, Matukumilli VD Prasad, Juhi Pandey, Avinash Warankar, Pankaj Mandal, Ajay Soni, Umesh V Waghmare, and Kanishka Biswas. Ultralow thermal conductivity in chain-like TlSe due to inherent Tl⁺ rattling. J. Am. Chem. Soc., 141(51):20293–20299, 2019.DOI
  9. [9]Binbin Jiang, Yong Yu, Juan Cui, Xixi Liu, Lin Xie, Jincheng Liao, Qihao Zhang, Yi Huang, Shoucong Ning, Baohai Jia, et al. High-entropy-stabilized chalcogenides with high thermoelectric performance. Science, 371(6531):830–834, 2021.DOI
  10. [10]Shuming Zeng, Lei Fang, Zonglin Gu, Xinming Wang, Yinchang Zhao, Geng Li, Yusong Tu, and Jun Ni. Ultralow lattice thermal conductivities and excellent thermoelectric properties of hypervalent triiodides XI₃ (X= Rb, Cs) discovered by machine learning method. J. Chem. Phys., 159(1), 2023.DOI
  11. [11]Zezhu Zeng, Xingchen Shen, Ruihuan Cheng, Olivier Perez, Niuchang Ouyang, Zheyong Fan, Pierric Lemoine, Bernard Raveau, Emmanuel Guilmeau, and Yue Chen. Pushing thermal conductivity to its lower limit in crystals with simple structures. Nat. Commun., 15(1):3007, 2024.DOI
  12. [12]Michele Simoncelli, Nicola Marzari, and Francesco Mauri. Unified theory of thermal transport in crystals and glasses. Nat. Phys., 15(8):809–813, 2019.DOI
  13. [13]Michele Simoncelli, Nicola Marzari, and Francesco Mauri. Wigner formulation of thermal transport in solids. Phys. Rev. X, 12:041011, Oct 2022.arxiv.org/abs/2112.06897
  14. [14]Zhiting Tian, Jivtesh Garg, Keivan Esfarjani, Takuma Shiga, Junichiro Shiomi, and Gang Chen. Phonon conduction in PbSe, PbTe, and PbTe₁₋ₓSeₓ from first-principles calculations. Phys. Rev. B, 85:184303, May 2012.DOI
  15. [18]Siqi Sun, Min Lu, Xupeng Gao, Zhifeng Shi, Xue Bai, William W Yu, and Yu Zhang. 0d perovskites: unique properties, synthesis, and their applications. Adv. Sci., 8(24):2102689, 2021.DOI
  16. [19]Georg Kresse and Jürgen Furthmüller. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B, 54(16):11169, 1996.pubmed.ncbi.nlm.nih.gov/9984901
  17. [20]P Hohenberg and WJPR Kohn. Density functional theory (dft). Phys. Rev., 136(1964):B864, 1964.
  18. [21]Walter Kohn and Lu Jeu Sham. Self-consistent equations including exchange and correlation effects. Phys. Rev., 140(4A):A1133, 1965.DOI
  19. [22]Georg Kresse and Daniel Joubert. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B, 59(3):1758, 1999.DOI
  20. [23]John P Perdew, Kieron Burke, and Matthias Ernzerhof. Generalized gradient approximation made simple. Phys. Review Lett., 77(18):3865, 1996.pubmed.ncbi.nlm.nih.gov/10062328
  21. [24]Stefano Baroni, Stefano De Gironcoli, Andrea Dal Corso, and Paolo Giannozzi. Phonons and related crystal properties from density-functional perturbation theory. Rev. Mod. Phys., 73(2):515, 2001.DOI
  22. [25]Olле Hellman and Igor A Abrikosov. Temperature-dependent effective third-order interatomic force constants from first principles. Phys. Rev. B, 88(14):144301, 2013.DOI
  23. [26]Wu Li, Lucas Lindsay, David A Broido, Derek A Stewart, and Natalio Mingo. Thermal conductivity of bulk and nanowire Mg₂SiₓSn₁−ₓ alloys from first principles. Phys. Rev. B, 86(17):174307, 2012.DOI
  24. [27]Wu Li, Jesús Carrete, Nebil A Katcho, and Natalio Mingo. Shengbte: A solver of the boltzmann transport equation for phonons. Comput. Phys. Commun., 185(6):1747–1758, 2014.DOI
  25. [28]Zherui Han, Xiaolong Yang, Wu Li, Tianli Feng, and Xilun Ruan. Fourphonon: An extension module to shengbte for computing four-phonon scattering rates and thermal conductivity. Comput. Phys. Commun., 270:108179, 2022.DOI
  26. [29]Linxuan Ji, Anqi Huang, Yiqi Huo, Yi-min Ding, Shuming Zeng, Yu Wu, and Liujiang Zhou. Influence of four-phonon scattering and wavelike phonon tunneling effects on the thermal transport properties of TiBiSe₂. Phys. Rev. B, 109:214307, Jun 2024.DOI
  27. [30]Craig C Laing, Daehan Kim, Jinu Park, Jiahong Shen, Ido Hadar, Justin M Hoffman, Jiangang He, Byungha Shin, Chris Wolverton, and Mercouri G Kanatzidis. Solution-processable mixed-anion cluster chalcohalide Rb₆Re₆S₈I₈ in a light-emitting diode. Nat. Mater., 23(2):230–236, 2024.DOI
  28. [31]Cheng Chang and Li-Dong Zhao. Anharmonicity and low thermal conductivity in thermoelectrics. Mater. Today Phys., 4:50–57, 2018.
  29. [32]Glen A Slack. Nonmetallic crystals with high thermal conductivity. J. Phys. Chem. Solids, 34(2):321–335, 1973.DOI
  30. [33]Glen A Slack. The thermal conductivity of nonmetallic crystals. Solid State Phys., 34:1–71, 1979.DOI
  31. [34]Wen Li, Siqi Lin, Binghui Ge, Jiong Yang, Wenqing Zhang, and Yanzhong Pei. Low sound velocity contributing to the high thermoelectric performance of Ag₈SnSe₆. Adv. Sci., 3(11):1600196, 2016.pubmed.ncbi.nlm.nih.gov/27980995
  32. [35]TJ Zhu, SN Zhang, SH Yang, and XB Zhao. Improved thermoelectric figure of merit of self-doped Ag₈₋ₓGeₓTe₆ compounds with glass-like thermal conductivity. Phys. Status Solidi-R., 4(11):317–319, 2010.
  33. [36]Xiangyu Zeng, Guangming Niu, Xiaowei Wang, Jutao Jiang, Laizhi Sui, Yutong Zhang, Anmin Chen, Mingxing Jin, and Kaijun Yuan. Strain-engineered thermoelectric performance in super- atomic semiconductor Re₆Se₈Cl₂: The role of four-phonon scattering and coherent phonons. J. Phys. Chem. Lett., 16:3122–3132, 2025.
  34. [37]Yi Xia, Dale Gaines, Jiangang He, Koushik Pal, Zhi Li, Mercouri G Kanatzidis, Vidvuds Ozoliņš, and Chris Wolverton. A unified understanding of minimum lattice thermal conductivity. Proc. Nat. Acad. Sci., 120(26):e2302541120, 2023.DOI
  35. [38]Niuchang Ouyang, Dongyi Shen, Chen Wang, Ruihuan Cheng, Qi Wang, and Yue Chen. Positive temperature-dependent thermal conductivity induced by wavelike phonons in complex Ag-based argyrodites. Phys. Rev. B, 111:064307, Feb 2025.arxiv.org/abs/2402.12699
  36. [39]Enrico Di Lucente, Michele Simoncelli, and Nicola Marzari. Crossover from boltzmann to wigner thermal transport in thermoelectric skutterudites. Phys. Rev. Res., 5(3):033125, 2023.DOI
  37. [40]Zhen Tong, Alessandro Pecchia, ChiYung Yam, Traian Dumitrică, and Thomas Frauenheim. Glass-like transport dominates ultralow lattice thermal conductivity in modular crystalline Bi₄O₄SeCl₂. Nano Lett., 23(20):9468–9473, 2023.DOI
  38. [41]Yi Xia, Vidvuds Ozoliņš, and Chris Wolverton. Microscopic mechanisms of glasslike lattice thermal transport in cubic Cu₁₂Sb₄S₁₃ tetrahedrites. Phys. Rev. Lett., 125(8):085901, 2020.DOI
  39. [42]Qing-Yu Xie, Peng-Fei Liu, Jiang-Jiang Ma, Li-Ming Wu, Kai-Wang Zhang, and Bao-Tian Wang. Microscopic mechanisms of glasslike lattice thermal conductivity in tetragonal α-CsCu₅Se₃. Phys. Rev. B, 108(1):014302, 2023.DOI
  40. [43]Xingchen Shen, Niuchang Ouyang, Yuling Huang, Yung-Hsiang Tung, Chun-Chuen Yang, Muhammad Faizan, Nicolas Perez, Ran He, Andrei Sotnikov, Kristin Willa, et al. Amorphous-like ultralow thermal transport in crystalline argyrodite Cu₇PS₆. Advanced Science, page 2400258, 2024.
  41. [44]Ankit Jain. Multichannel thermal transport in crystalline Tl₃VSe₄. Phys. Rev. B, 102(20):201201, 2020.DOI
  42. [45]Jingyu Li, Lიუმing Wei, Zhuoyang Ti, Jianbo Zhu, Wენya Zhai, Hang Li, and Peng-Fei Liu. Ultralow two-channel thermal conductivity in aikinitе. Mater. Today Phys., 45:101454, 2024.DOI
  43. [46]Qing-Yu Xie, Feng Xiao, Kai-Wang Zhang, and Bao-Tian Wang. Anharmonic phonon self-energy and anomalous thermal transport in the quaternary compound BaAg₂SnSe₄. Phys. Rev. B, 110(4):045203, 2024.DOI
  44. [47]T Pandey, Mao-Hua Du, David S Parker, and L Lindsay. Origin of ultralow phonon transport and strong anharmonicity in lead-free halide perovskites. Mater. Today Phys., 28:100881, 2022.DOI
  45. [48]Fan Li, Xin Liu, Jiawei Yang, Xin-Ye Wang, Yi-Chang Yang, Ni Ma, Ling Chen, and Li-Ming Wu. Long-range anion correlations mediating dynamic anharmonicity and contributing to glassy thermal conductivity in well-ordered K₂Ag₄Se₃. Small, 21(4):2409524, 2025.DOI
  46. [49]Jingyu Li, Xiyang Li, Yongsheng Zhang, Jianbo Zhu, Enyue Zhao, Maiko Kofu, Kenji Nakajima, Maxim Avdeev, Peng-Fei Liu, Jiehe Sui, et al. Crystal-liquid duality driven ultralow two-channel thermal conductivity in α-MgAgSb. Appl. Phys. Rev, 11(1), 2024.DOI

Paper details

vlnc:W_r2eudys4
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents