WorksPhysics and Astronomy
Topological domain-wall states from Umklapp scattering in twisted bilayer graphene
Abstract
Twistronics, harnessing interlayer rotation to tailor electronic states in van der Waals materials, has predominantly focused on small-angle regime. Here, we unveil the pivotal role of intervalley Umklapp scattering in large-angle twisted bilayer graphene, which governs low-energy physics and drives unconventional band topology. By constructing symmetry-constrained effective models for -twisted bilayers, we demonstrate how structural chirality imprints distinct electronic responses. The configuration exhibits a gapped spectrum with chiral interlayer coupling, while symmetric stacking configuration displays semimetallic behavior. Crucially, chirality inversion creates topological domain-wall states, which manifest as counterpropagating pseudospin modes at interfaces between oppositely twisted regions. These states, absent in untwisted bilayers, emerge from a Jackiw-Rebbi-like mechanism tied to chirality reversal. Atomistic simulations confirm these topological states and demonstrate their robustness against symmetry-breaking perturbations. The interplay between twist-induced chirality and topology opens new pathways for engineering domain-wall states in twisted materials.
Introduction
In recent years, the introduction of moiré patterns created by interlayer rotation or lattice mismatch in vertically stacked two-dimensional (2D) crystals has been extensively explored for manipulating electron behavior [1, 2, 3, 4, 5]. The twisted-moiré-driven paradigm, now termed twistronics, enables continuous tuning of electronic structures through a single rotational degree of freedom [6, 7, 8]. To date, most investigations on twisted van der Waals (vdW) materials have focused on the small-angle twist regime [9, 10, 11, 12, 13, 14]. Taking twisted bilayer graphene (tBG) as an example, a slight interlayer rotation induces a small momentum-space separation between the Dirac cones of adjacent layers. This results in low-energy physics governed primarily by intravalley scattering of Dirac electrons between neighboring layers [1, 15]. Increasing the twist angle produces two distinct momentum-space effects: First, Dirac points from the same valley in adjacent layers get widely separated, restricting the intravalley interlayer hybridization to regions far from the Dirac point where Dirac cones overlap. Second, opposite valleys from adjacent layers approach each other beyond the first Brillouin zone, enabling the moiré-lattice-assisted interlayer tunneling through Umklapp processes [11, 16, 17, 18, 19]. This mechanism, critical for hybridizing opposite valleys from different layers, governs emergent topological phases such as 2D second-order topological insulator phase [20, 21] and three-dimensional (3D) chiral topological semimetal phase [22, 23], has yet to be fully deciphered.
Here, we systematically investigate the low-energy physics of large-angle tBGs (), where intervalley Umklapp scattering dominates. By constructing symmetry-adapted models for different stackings belonging to chiral point groups or , we reveal how structural chirality () splits otherwise degenerate states and dictates band topology. For example, the -symmetric configuration exhibits a gapped spectrum with hidden Bernevig-Hughes-Zhang-like topology, while the stacking permits semimetallic phases with quadratic band crossings. Furthermore, we demonstrate that chirality reversal across domain walls generates topological protected interfacial states. These states emerge from a Jackiw-Rebbi-like mechanism, where the sign reversal in structural chirality () creates a valley-projected pseudospin texture that supports counterpropagating modes. Numerical tight-binding calculations confirm their persistence against different symmetry-breaking perturbations and also demonstrate their robustness across most tBG configurations at . Our work unveils a novel approach to achieve robust topological channels at the domain-wall boundary, with implications for chiral transport engineering in twisted vdW materials.
The rest of the paper is organized as follows. In Section Section II, we characterize the crystal structures of commensurate tBGs at with the symmetry of point group and . Section Section III builds on this foundation to develop effective low-energy models for those configurations, uniquely incorporating the intervalley Umklapp tunneling, capturing key distinctions from untwisted bilayers, with validation by atomistic Slater–Koster tight-binding (a-SKTB) calculations. In Section Section IV, we predict topological domain-wall states at chirality-reversal interfaces (), mapping the bulk to a Bernevig-Hughes-Zhang-like framework to establish nontrivial topology. Analytical domain wall models reveal a Jackiw-Rebbi-like mechanism tied to chirality reversal, and a-SKTB simulations confirm the robust in-gap modes. In Section § 5, we further discuss the resilience of these states under different symmetry-breaking perturbations.
Crystal Structure
Commensurate structures exhibit a well-defined periodicity when the twist angle satisfies [24, 25]
where, and are coprime positive integers. The twist angle is a double-valued function of , yielding pairs that corresponding to chiral structures with opposite handednesses. This structural chirality can be imprinted in electronic structures, driving chiral transport phenomena [26, 27], which is absent in untwisted bilayers. The minimal commensurate structure occurs at with , forming a moiré superlattice with 28 atoms and primitive vectors elongated by relative to monolayer graphene [28, 29]. At this angle, the intervalley Umklapp interlayer tunneling is strongest, which is negligible at small twist angles. Crucially, such small moiré scale amplifies the non-negligible influence of crystalline symmetry details, which depends sensitively on the rotation center, on low-energy electronic response properties. For instance, rotating the top layer around the hexagon center results in commensurate structures belonging to point groups (see Figure 1(a)), referred to here as the configuration. Alternatively, rotating the top layer around an overlapping atom site results in commensurate structures belonging to chiral point groups , as shown in Figure 1(b-Figure 1c). This configuration manifests in two distinct types: the configuration (see Figure 1(b)) resulting from rotation along the sublattice in the top layer () and the sublattice in the bottom layer (), and the configuration (see Figure 1(c)), involving rotation along the sublattice in the top layer () and the sublattice in the bottom layer ().
Figure 1. (a-c) Crystal structures of the , , and configurations, respectively. Red/blue colors denote top/bottom layers; solid/hollow markers distinguish sublattices. (d) Direct band gap map of local structures versus in-plane translation vector of top layer. (e) Brillouin zone schematic of monolayer Dirac points at small twist angles: solid/hollow markers denote valleys; red/blue colors indicate top/bottom layers. Layer hybridization is dominated by intervalley channel near the Dirac points (dotted black circles). (f) Brillouin zone schematic for showing points of top layer overlapping with points of bottom layer at second-zone corners (dotted green circles). Layer hybridization here is dominated by the intervalley Umklapp processes.
One observes that the three configurations in can switch to each other via in-plane translation of the top layer. As shown in Figure 1(d), displacing the top layer by converts the configuration to or . Figure 1(d) also maps the direct band gap across various reconstructed structures of tBGs at as a function of top-layer translation vector . Interestingly, the data reveal a real-space moiré periodicity of , showing a seven-fold contraction relative to [30, 31].
In tBGs, space inversion and all the mirror symmetries are broken. At , the -symmetric configurations possess the highest symmetry (space group No. 177), preserving both the and rotational symmetries inherited from monolayer graphene. While symmetry is retained in both and configurations, (space group No. 150) systems break . Beyond these three specific symmetry classes, all in-plane rotational symmetries are broken, leading to reduced symmetry constraints on electronic states. These symmetries will be important for our discussion below.
Effective Low-energy models
Interlayer coupling in tBGs obeys momentum conservation
where and are Bloch wave vectors of the two layers and and are their reciprocal lattice vectors. At small twist angles, the intervalley scattering between Dirac cones dominates the low-energy physics of tBG (see Figure 1(e)), leading to the seminal continuum model of small twist angle tBG [32, 33]. For larger angles, however, the intervalley coupling hybridizes states far from the Dirac points, while the intervalley tunneling governs the low-energy sector [17, 18]. At , the intervalley Umklapp scattering peaks due to minimized Umklapp scattering wavevector lengths.
Prior studies [34, 35] reveal similarities in the four-band low-energy spectra of tBGs at and untwisted bilayers, where -, -, and -symmetric configurations correspond to AA, AB, and BA stacking, respectively, as shown in the band structures of Figure 2(a, c, d, f). The defining factor for their differing electronic behaviors is the intervalley Umklapp tunneling, which should intrinsically encode structural chirality. To understand its role, we construct effective low-energy Hamiltonians near the moiré Brillouin zone corners under different symmetry constraints, elucidating how this process reshapes electronic structures and band topology.
Figure 2. Comparison of low-energy band structures in large-angle tBG versus untwisted bilayers. (a, d) Bulk bands of the and configurations from atomistic-SKTB method. (b, e) Corresponding effective model results. (c, f) Untwisted AA/AB-stacked bilayer graphene bands for reference. Color coding denotes -space band geometric quantity . (g, h) Intra- and interlayer chiral term effects in model: chiral hoppings restore characteristic trigonal warping in low-energy bands (only topmost valence and bottommost conduction bands are shown).
We start with the configuration, the little group at point contains the generators , , which are represented in the low-energy four-state basis at point as [36]
where and are the Pauli matrices acting on the effective layer and sublattice index, respectively, and are identity matrix. In addition, we have a combined symmetry , where is the time reversal symmetry and is the complex conjugation. In the basis of this representation, the effective four-band low-energy model of configuration is given by
The model parameters (non-chiral interlayer coupling) and (chiral interlayer coupling) are real-valued, with measured from the point, the renormalized Fermi velocity, and encoding structural handedness. Symmetry analysis identify as a hallmark of inversion symmetry breaking, which lifts the degeneracy of mirror-symmetric configurations, splitting the system into chiral left- () or right-handed () ones. These parameters are determined by fitting low-energy bands near point, while is reflected in both the energy gap as well as the band geometric quantity (c.f. Eq. (16) in Appendix B), which is sensitive to structural chirality [26]. As shown in Figure 2(a,b), our effective model reproduces both the energy dispersions and band geometric responses of the a-SKTB framework (more details in Appendix A), confirming its fidelity in capturing -symmetric tBG’s low-energy physics.
As to configuration, it breaks symmetry, the remaining rotational operators are represented as
Thus the effective model up to order is
Unlike the gapped phase, the -symmetric configuration exhibits semimetallic behavior, characterized by a quadratic band crossing at the point (see Figure 2(d-e)). We stress that the -quadratic terms in model Eq. (6) are indispensable to capture the correct band geometric quantity and trigonal warping of band structures (see Figure 2(g, h)). Furthermore, interlayer chiral coupling in this stacking manifests as -wave term, contrasting with the symmetry-protected constant coupling in the model (Eq. (4)). Note that the intralayer chirality produces an inequivalence between top and bottom layers, possibly originating from projection of higher-energy band information to lower-energy bands. For the configuration, since it is linked to the configuration by an operation, they are distinguished by the interlayer coupling given by
while the intralayer terms remain unchanged.
Topological domain-wall states
The interlayer terms in the effective model Eq. (4) partition into -preserving () and -breaking () contributions. Removing the latter reduces the Hamiltonian to the well-known -stacked bilayer graphene, while retaining it introduces a binary parameter . Although the and configurations exhibit identical band dispersions and second-order band topology [20, 21], the potential for topological protected domain-wall modes at their interface is an open question. To explore this, we construct a hybrid system with a domain wall between and and investigate its electronic structure.
To have a quantitative description, we derive a domain-wall model from the bulk . First, consider a flat edge at , with left-handed tBG () occupying and right-handed tBG () occupying (see Figure 3(a)). The domain-wall states are solved from the following Schrödinger equation
Figure 3. Topological domain-wall states induced by structural chirality. (a) Schematic of a domain wall between tBG ( configuration). A short length is shown for better representation. (b, c) Corresponding energy spectra.
with
Here is a good quantum number, while is replaced by . At , we find two exponentially localized zero-energy modes
Projecting the onto these states yields a 1D edge model
where is the wave vector along the boundary, and the Pauli matrices act on the space of .
We demonstrate that topological protected domain-wall states exist at interfaces between systems even with identical bulk bands and topological invariants. From the above derivation, one notes that the band-crossing behavior in edge spectra arises from the sign reversal of an intrinsic bulk parameter (), mirroring the Jackiw-Rebbi mechanism [37, 38], where mass inversion underpins topological edge states. When interlayer hopping vanishes, the eigenstates and are also eigenstates of with eigenvalues , describing chiral modes counterpropagating along axis. Finite hybridizes these pseudospin channels without destroying intrinsic topological nature, mirroring the effect of an in-plane Zeeman field in a Bernevig-Hughes-Zhang (BHZ) model [39]. Notably, one could map the Hamiltonian in Eq. (4) (without ) to the well-known BHZ model
which describes the quantum spin Hall effect with opposite spin currents. Finite breaks time-reversal symmetry but preserves the bulk gap, maintaining its nontrivial topology [40, 41].
Our analysis reveals that two regions of -symmetric tBGs related by spatial inversion must host topological protected domain-wall states near the valley. To verify this, we construct a tBG ribbon with right-handed tBG on the left side and left-handed tBG on the right side, imposing periodicity along the domain-wall boundary (see Figure 3(a)). Numerical a-SKTB calculations of the energy spectrum confirm the existence of these topological states that manifest themselves as in-gap band-crossing modes (red lines in Figure 3(b-Figure 3c)).
Discussion and conclusion
Topological domain-wall states are robust against weak symmetry-breaking perturbations as long as the bulk gap remains intact. To systematically probe this robustness, we introduce different symmetry-breaking on-site potentials and a uniaxial strain perturbation. Effective tight-binding simulations (more details in Appendix B) demonstrate the persistence of these states under such perturbations.
First, we incorporate a -breaking staggered potential term into the model (Eq. (9)).
The bulk gap remains open for all , and band-crossing behavior is observed (see Figure 4(a)), confirming the stability of the topological states. Next, we show that a distinct - and -breaking term still keep band-crossing behavior (see Figure 4(b)). A third perturbation, , which breaks symmetry, also preserves band-crossing behavior (see Figure 4(c)), further confirming its topological robustness. Additionally, we apply an unrealistic 7% uniaxial strain along the -axis in Figure 3(a), breaking . The bulk gap remains open, leaving the domain-wall states unaffected (see Figure 4(d)).
Figure 4. Topological robustness against different symmetry-breaking perturbations. (a-d) Energy spectra for the domain walls under , , ( meV) and 7% uniaxial strain, respectively. (e, f) Crystal structure and domain-wall states for a configuration displaced from structure by . (g, h) Alternative realization of the topological domain-wall states.
The above analysis demonstrates that topological domain-wall states persist under various symmetry-breaking perturbations. This is also verified by a-SKTB calculations (see Appendix A). Furthermore, we claim that this conclusion extends universally to tBG systems beyond the high-symmetric configuration. For generic tBG systems with arbitrary interlayer displacements, the effective Hamiltonian can be expressed as , where represents certain symmetry-breaking deviations induced by displacement. Crucially, topological domain-wall states should survive provided preserves the bulk gap, avoiding closure (e.g., gapless regimes in Figure 1(d)). This universality is exemplified for , where band-crossing behavior survives even in randomly displaced tBGs (see Figure 4(e, Figure 4f)). Notably, while -reversed domain-wall states vanish in gapless regimes, valley-Chern-dominated topological channels emerge at interfaces (see Appendix C), suggesting competing topological mechanisms.
The realization of these topological domain-wall states is constrained by the intervalley Umklapp scattering strength, here estimated at meV. Crucially, as derived from Eq. (12), when operates on the layer index, our model can also map to bilayer graphene with certain staggered potential. This equivalence enables the engineering of the topological domain-wall states at interfaces between two AA-stacked bilayers. Specifically, on the left side of the interface, sublattices and are assigned with onsite energy , while and on the right side are set to (see Figure 4(g)). Our calculations confirm the emergence of robust domain-wall states in this configuration (see Figure 4(h)), which indicates that the paradigm extends beyond graphene: analogous states arise at domain walls between -stacking and -stacking bilayers such as hexagonal boron nitride, proving broad applicability in vdW systems.
The atomistic SKTB model of tBG
The atomistic SKTB model of bilayer graphene is given by [35]
where and denote the creation and annihilation operators for the orbital on site and , respectively, symbolizes the position vector from site to , and represents the hopping amplitude between site and . We adopt the following approximations:
In the above, Å is the nearest-neighbor distance on monolayer graphene, Å represents the interlayer spacing, is the intralayer hopping energy between nearest-neighbor sites, and corresponds to the energy between vertically stacked atoms on the two layers. Here we take eV, eV, and Å to fit the dispersions of tBG from DFT result in ref [23, 42]. Hopping for Å is exponentially small and thus neglected in our calculation.
To check the topological robustness, we use the a-SKTB model to calculate the domain-wall states under three kinds of symmetry-breaking perturbations , and in the maintext. To transform from the effective basis to the atomic basis, the perturbations now become , and applied on the sublattices , , and of bilayer graphene, respectively. As Figure A1 shows, the survival of the band-crossing behavior verify the robustness of the topological domain-wall states and the effectiveness of our simplified tight-binding model in Appendix B.
Figure A1. The atomistic-SKTB band structures of domain walls under three kinds of symmetry-breaking perturbations , and .
Effective simplified tight-binding model
We also propose an effective simplified tight-binding model (sim-TB) to further understand the role of intervalley Umklapp tunneling and the corresponding topological domain-wall states. The sim-TB model for the configuration reads
where and are the Pauli matrices acting on the effective layer and sublattice index, respectively (see Figure B1(a,b)). The nearest-neighbor intralayer hopping vectors are given by , and with the amplitude . For the interlayer part, corresponds to the amplitude of direct effective interlayer and intra-sublattice hopping, while represents the chiral next-nearest interlayer and inter-sublattice hopping with hopping vectors , and and or .
Figure B1. The diagram of chiral hopping in our sim-TB model. The small/large circles represent real/effective atoms. The red and blue colors represent atoms in top and bottom layers, respectively. The empty and solid circles represent sublattice or effective sublattice and , respectively. The pure-colored segments depict the intralayer hopping with the hopping of the top/bottom layer colored by red/blue. The gradient arrows depict the interlayer hopping with the red/blue terminal expressing sublattice in the top/bottom layer. (a) depicts the chiral hopping of sim-TB model with twist angle . (b) gives the chiral hopping of sim-TB model of twist angle . Clearly, the chiral hoppings in the two configurations are connected by mirror operation. (c, d) give the intralayer and interlayer chiral hoppings of sim-TB model with twist angle , respectively. (e, f) show the bands using sim-TB model in which the topological domain-wall states are plotted by the red lines. (g, h) show the bands using sim-TB model.
The model in Eq. (4) can be obtained from a low- expansion of the sim-TB model (Eq. (15)) at the valley.
Thus, the calculation of and band geometric quantity is in good agreement with a-SKTB model. Furthermore, when , the model reduces to a tight-binding model of -stacking bilayer graphene whose Bloch basis has well-defined layers and sublattices [43].
The band geometric quantity is expressed in the form [26]
where represents the band index. The term involves operator , with . This operator helps to distinguish between the two enantiomers as it carries information about the layer degree.
Similarly, we propose a sim-TB model with Wannier-like basis centered on Wyckoff positions of configuration as below:
The hopping vectors are given by , and with the amplitude . In this tight-binding model, extra intralayer chiral hoppings , , , , and with the amplitude and non-chiral second-nearest neighbor hoppings , and with the amplitude are introduced. Furthermore, the interlayer chiral hoppings have inverse directions of intralayer chiral hoppings with the amplitude . In Figure B1(c) and (d), the Wyckoff positions of the space group of the configuration are identical to the atom positions of -stacking bilayer graphene.
Our effective sim-TB models reproduce the key topological phenomena: novel topological domain-wall states persist (Figure B1(e,f)), and valley Chern domain-wall states emerge (Figure B1(g,h)). This demonstrates quantitative agreement with the low-energy physics across all three high-symmetric configurations.
Valley transport in D3/D3′ interface
Figure 1(d) shows the band gap vanishes along the high-symmetry path connecting the and configurations. This gap closure precludes the chirality-reversal-induced topological domain-wall states discussed in the main text. We demonstrate that valley Chern number protected topological domain-wall states emerge within this gapless regime.
While valley-projected edge modes copropagate at interfaces in gated bilayer graphene [44, 45, 46], analogous valley currents arise at a domain wall (see Figure C1(c)). This stems from the identical valley Chern numbers of () and () stacking bilayer graphene, evidenced by their Berry curvatures (see Figure C1(a, b)). Our a-SKTB calculations confirm the valley Chern number protected gapless modes at this interface (see Figure C1(d, e)), which are consistent with Ref. [47]. This result establishes an intrinsic topological valley-conducting channels independent of structural chirality.
Figure C1. The topological domain-wall states of interface. (a, b) shows the normalized Berry curvature near valley, showing that valley transport of the domain wall can also be achieved in the domain wall. (c) gives the diagram of domain wall between the and configuration, which is achieved by a slight strain along the nonperiodic direction. (d, e) show the topological domain-wall states of this structure.
References
- [1]E. Y. Andrei and A. H. MacDonald, Nat. Mater. 19, 1265 (2020).
- [2]D. M. Kennes, M. Claassen, L. Xian, A. Georges, A. J. Millis, J. Hone, C. R. Dean, D. Basov, A. N. Pasupathy, and A. Rubio, Nat. Phys. 17, 155 (2021).
- [3]E. Y. Andrei, D. K. Efetov, P. Jarillo-Herrero, A. H. MacDonald, K. F. Mak, T. Senthil, E. Tutuc, A. Yazdani, and F. Young, Nat. Rev. Mater. 6, 201 (2021).
- [4]N. P. Wilson, W. Yao, J. Shan, and X. Xu, Nature 599, 383 (2021).
- [5]C. N. Lau, M. W. Bockrath, K. F. Mak, and F. Zhang, Nature 602, 41 (2022).
- [6]S. Carr, D. Massatt, S. Fang, P. Cazeaux, M. Luskin, and E. Kaxiras, Phys. Rev. B 95, 075420 (2017).
- [7]Z. Hennighausen and S. Kar, Electron. Struct. 3, 014004 (2021).
- [8]X. Sun, M. Suriyage, A. R. Khan, M. Gao, J. Zhao, B. Liu, M. M. Hasan, S. Rahman, R.-s. Chen, P. K. Lam, and Y. Lu, Chem. Rev. 124, 1992 (2024).
- [9]Y. Cao, V. Fatemi, S. Fang, K. Watanabe, T. Taniguchi, E. Kaxiras, and P. Jarillo-Herrero, Nature 556, 43 (2018).
- [10]Y. Cao, V. Fatemi, A. Demir, S. Fang, S. L. Tomarken, J. Y. Luo, J. D. Sanchez-Yamagishi, K. Watanabe, T. Taniguchi, E. Kaxiras, R. C. Ashoori, and P. Jarillo-Herrero, Nature 556, 80 (2018).
- [11]K. L. Seyler, P. Rivera, H. Yu, N. P. Wilson, E. L. Ray, D. G. Mandrus, J. Yan, W. Yao, and X. Xu, Nature 567, 66 (2019).
- [12]F. Wu, T. Lovorn, E. Tutuc, I. Martin, and A. H. MacDonald, Phys. Rev. Lett. 122, 086402 (2019).
- [13]L. Wang, E.-M. Shih, A. Ghiotto, L. Xian, D. A. Rhodes, C. Tan, M. Claassen, D. M. Kennes, Y. Bai, B. Kim, K. Watanabe, T. Taniguchi, X. Zhu, J. Hone, A. Rubio, A. N. Pasupathy, and C. R. Dean, Nat. Mater. 19, 861 (2020).
- [14]J. Cai, E. Anderson, C. Wang, X. Zhang, X. Liu, W. Holtzmann, Y. Zhang, F. Fan, T. Taniguchi, K. Watanabe, Y. Ran, T. Cao, L. Fu, D. Xiao, W. Yao, and X. Xu, Nature 622, 63 (2023).
- [15]R. Bistritzer and A. H. MacDonald, Proc. Natl. Acad. Sci. 108, 12233 (2011).
- [16]R. Bistritzer and A. H. MacDonald, Phys. Rev. B 81, 245412 (2010).
- [17]H. Yu, Y. Wang, Q. Tong, X. Xu, and W. Yao, Phys. Rev. Lett. 115, 187002 (2015).
- [18]E. M. Alekseev, D. A. Ruiz-Tijerina, M. Danovich, M. J. Hamer, D. J. Terry, P. K. Nayak, S. Ahn, S. Pak, J. Lee, J. I. Sohn, et al., Nature 567, 81 (2019).
- [19]J. Wallbank, R. Krishna Kumar, M. Holwill, Z. Wang, G. Auton, J. Birkbeck, A. Mishchenko, L. Ponomarenko, K. Watanabe, T. Taniguchi, et al., Nat. Phys. 15, 32 (2019).
- [20]M. J. Park, Y. Kim, G. Y. Cho, and S. Lee, Phys. Rev. Lett. 123, 216803 (2019).
- [21]B. Liu, L. Xian, H. Mu, G. Zhao, Z. Liu, A. Rubio, and Z. F. Wang, Phys. Rev. Lett. 126, 066401 (2021).
- [22]S. Qian, Y. Li, and C.-C. Liu, Phys. Rev. B 108, L241406 (2023).
- [23]C. Chen, X.-T. Zeng, and W. Yao, Rep. Prog. Phys. 88, 018001 (2025).
- [24]J. M. B. Lopes dos Santos, N. M. R. Peres, and A. H. Castro Neto, Phys. Rev. Lett. 99, 256802 (2007).
- [25]Y.-N. Ren, Y. Zhang, Y.-W. Liu, and L. He, Chi. Phys. B 29, 117303 (2020).
- [26]D. Zhai, C. Chen, C. Xiao, and W. Yao, Nat. Commun. 14, 1961 (2023).
- [27]J. Li, D. Zhai, C. Xiao, and W. Yao, Quantum Frontiers 3, 11 (2024).
- [28]X. Zhao, J. Qiao, S. M. Chan, J. Li, J. Dan, S. Ning, W. Zhou, S. Y. Quek, S. J. Pennycook, and K. P. Loh, Nano Letters 21, 3262 (2021).
- [29]Y. Li, F. Zhang, V.-A. Ha, Y.-C. Lin, C. Dong, Q. Gao, Z. Liu, X. Liu, S. H. Ryu, H. Kim, C. Jozwiak, A. Bostwick, K. Watanabe, T. Taniguchi, B. Kousa, X. Li, E. Rotenberg, E. Khalaf, J. A. Robinson, F. Giustino, and C.-K. Shih, Nature 625, 494 (2024).
- [30]M. G. Scheer, K. Gu, and B. Lian, Phys. Rev. B 106, 115418 (2022).
- [31]A. Dunbrack and J. Cano, Phys. Rev. B 107, 235425 (2023).
- [32]J. M. B. Lopes dos Santos, N. M. R. Peres, and A. H. Castro Neto, Phys. Rev. B 86, 155449 (2012).
- [33]M. Koshino, N. F. Q. Yuan, T. Koretsune, M. Ochi, K. Kuroki, and L. Fu, Phys. Rev. X 8, 031087 (2018).
- [34]E. J. Mele, Phys. Rev. B 81, 161405 (2010).
- [35]P. Moon and M. Koshino, Phys. Rev. B 87, 205404 (2013).
- [36]C. J. Bradley and A. P. Cracknell, The Mathematical Theory of Symmetry in Solids (Clarendon, Oxford, 1972).
- [37]R. Jackiw and C. Rebbi, Phys. Rev. D 13, 3398 (1976).
- [38]S.-Q. Shen, Topological Insulators, Springer Series in Solid-State Sciences, Vol. 174 (Springer, Berlin, Heidelberg, 2012).DOI
- [39]B. A. Bernevig, T. L. Hughes, and S.-C. Zhang, Science 314, 1757 (2006).
- [40]Y. Ren, Z. Qiao, and Q. Niu, Phys. Rev. Lett. 124, 166804 (2020).
- [41]C. Chen, Z. Song, J.-Z. Zhao, Z. Chen, Z.-M. Yu, X.-L. Sheng, and S. A. Yang, Phys. Rev. Lett. 125, 056402 (2020).
- [42]S. Shallcross, S. Sharma, and O. A. Pankratov, Phys. Rev. Lett. 101, 056803 (2008).
- [43]J. Jung and A. H. MacDonald, Phys. Rev. B 87, 195450 (2013).
- [44]F. Zhang, A. H. MacDonald, and E. J. Mele, Proc. Natl. Acad. Sci. 110, 10546 (2013).
- [45]A. Vaezi, Y. Liang, D. H. Ngai, L. Yang, and E.-A. Kim, Phys. Rev. X 3, 021018 (2013).
- [46]L. Ju, Z. Shi, N. Nair, Y. Lv, C. Jin, J. Velasco, C. Ojeda-Aristizabal, H. A. Bechtel, M. C. Martin, A. Zettl, J. Analytis, and F. Wang, Nature 520, 650 (2015).
- [47]C. Mondal, R. Ghadimi, and B.-J. Yang, Phys. Rev. B 108, L121405 (2023).

