betaFeedback

WorksPhysics and Astronomy

Magnetotropic signatures of Fulde-Ferrell Pairing in a Pauli-limited superconductor

Abstract

Resonant torsion magnetometry measures the angular curvature of the free energy and is sensitive to magnetic anisotropy. We calculate its response for a clean Pauli-limited superconductor with single-plane-wave Fulde-Ferrell pairing. Field rotation drives a first-order transition from the uniform condensate into the finite-momentum phase and a continuous transition into the normal state. The first-order line produces a sharp softening whose integrated weight is fixed by the magnetization jump, so the dip alone does not identify finite momentum. The distinguishing response is a broad softening inside the Fulde-Ferrell phase, caused by relaxation of the gap and pairing momentum, followed by a finite step at the upper critical field.

Introduction

In a conventional spin-singlet superconductor, electrons with opposite momenta and spins form Cooper pairs with zero center-of-mass momentum. A magnetic field polarizes the spin populations through the Zeeman interaction, creating a mismatch between their Fermi surfaces that suppresses uniform pairing at the Pauli limit [1, 2]. Fulde and Ferrell, and independently Larkin and Ovchinnikov, showed that pairing can survive with a finite center-of-mass momentum, which partly compensates this mismatch [3, 4]. Such phases require clean samples and weak orbital depairing [5].

Sr2RuO4\mathrm{Sr}_2\mathrm{RuO}_4 is a relevant system for this study, as its in-plane upper critical field becomes first-order at low temperatures [6, 7], torque magnetometry reveals a high-field anomaly [8], and NMR spectra show features consistent with spatially modulated spin polarization [9]. Magnetostriction also finds a high-field anomaly, although its relation to the NMR boundary remains unsettled [10, 11].

These observations suggest a high-field superconducting phase diagram, but the identification of finite-momentum pairing remains challenging. Resonant torsion magnetometry provides complementary information by converting the angular curvature of the free energy into a shift of a mechanical resonance [12, 13]. This approach provides high sensitivity for micron-scale samples, where conventional magnetization measurements can be challenging. The magnetotropic response contains both magnetization and spin susceptibility contributions, whose relative importance depends on field orientation. An in-plane field isolates the magnetization term, whereas tilted fields probe both contributions. Here, we calculate the magnetotropic response of a clean Pauli-limited superconductor in which finite-momentum pairing is allowed and examine its evolution with magnetic field and angle. We use the angular dependence to investigate how the response at phase boundaries differs from that within the high-field superconducting state.

Measurement Geometry and Theoretical Model

Measurement Principle

We consider the cantilever geometry illustrated in Figure 1(a). A superconducting sample of volume VsV_s is mounted near the free end of a cantilever with mode stiffness SnS_n and frequency f0f_0. A magnetic field of fixed magnitude makes an angle θ\theta with the crystalline cc axis, while the cantilever motion produces a small angular modulation δθ(t)\delta\theta(t).

Figure 1. Cantilever geometry and superconducting order parameters. (a) A superconducting sample mounted near the free end of a cantilever undergoes small angular oscillations δθ(t)\delta\theta(t) about a field orientation θ\theta. (b) In the uniform state, the order parameter is constant, Δ(r)=Δ0\Delta(\mathbf{r})=\Delta_0. In the FF state, Δ(r)=Δqeiq⋅r\Delta(\mathbf{r})=\Delta_q e^{i\mathbf{q}\cdot\mathbf{r}}, so its magnitude remains constant while its phase winds along q\mathbf{q}.

For an equilibrium sample free energy Feq(θ)\mathcal{F}_{\mathrm{eq}}(\theta), the torque is τ=−∂θFeq\tau=-\partial_\theta\mathcal{F}_{\mathrm{eq}} and its linear restoring term is −kδθ-k\delta\theta with k=∂θ2Feqk=\partial_\theta^2\mathcal{F}_{\mathrm{eq}}. While the static torque shifts the mean cantilever position, its angular derivative modifies the stiffness and hence the resonance frequency, f=f01+k/Snf=f_0\sqrt{1+k/S_n}. For ∣k∣≪Sn|k|\ll S_n, the relative frequency shift is Δf/f0≃k/(2Sn)\Delta f/f_0\simeq k/(2S_n) [12, 13]. To isolate the superconducting contribution, we subtract the normal-state background and define the free-energy density Feq=(Feq−FN)/Vs\mathcal{F}_{\mathrm{eq}}=(F_{\mathrm{eq}}-F_N)/V_s. The resulting frequency shift is Δf/f0=VsΔκ/(2Sn)\Delta f/f_0=V_s\Delta\kappa/(2S_n), where Δκ=∂θ2Feq\Delta\kappa=\partial_\theta^2\mathcal{F}_{\mathrm{eq}} is the magnetotropic coefficient per unit volume. Positive Δκ\Delta\kappa stiffens the mode and negative Δκ\Delta\kappa softens it.

Single-qq superconducting model

We consider a clean, single-band superconductor with spin-singlet pairing and a cylindrical Fermi surface, characterized by Fermi velocity vFv_F and density of states N(0)N(0) per spin. We set kB=ℏ=1k_B=\hbar=1.

For a diagonal gg tensor, the Zeeman energy is h(θ)=bg(θ)h(\theta)=bg(\theta), where g(θ)=(sin⁡2θ+ε2cos⁡2θ)1/2g(\theta)=(\sin^2\theta+\varepsilon^2\cos^2\theta)^{1/2}, b=gaμBB/2b=g_a\mu_BB/2, and ε=gc/ga\varepsilon=g_c/g_a. The isotropic limit ε=1\varepsilon=1 gives no angular response, while ε=0\varepsilon=0 eliminates the Zeeman coupling along cc. For 0<ε<10<\varepsilon<1, the coupling increases as the field is rotated toward the plane and may drive the system through the uniform, FF, and normal phases. Thus, ε\varepsilon controls the angular positions of the phase boundaries and the magnitude of the magnetotropic response. We use ε=0.5\varepsilon=0.5 as an illustrative value. Quantitative comparison with a specific material requires its corresponding gg-factor anisotropy. Orbital depairing is omitted, so the model is most applicable near orientations where orbital pair breaking is weak.

To describe finite-momentum pairing, we adopt the Fulde–Ferrell (FF) ansatz Δ(r)=Δeiq⋅r\Delta(\mathbf{r})=\Delta e^{i\mathbf{q}\cdot\mathbf{r}}, where q\mathbf{q} is the center-of-mass momentum of the Cooper pairs. This corresponds to pairing between states (k+q/2,↑)(\mathbf{k}+\mathbf{q}/2,\uparrow) and (−k+q/2,↓)(-\mathbf{k}+\mathbf{q}/2,\downarrow). It has a winding phase and constant ∣Δ∣|\Delta|, as shown in Figure 1(b).

Near the Fermi surface, ξk±q/2≃ξk±Qcos⁡ϕ\xi_{\mathbf{k}\pm\mathbf{q}/2}\simeq\xi_k\pm Q\cos\phi with Q=vFq/2Q=v_Fq/2. In the corresponding Nambu basis the mean-field Hamiltonian is

Hk=(Qcos⁡ϕ−h)τ0+ξkτ3+Δτ1,(1)\mathcal{H}_{\mathbf{k}}=(Q\cos\phi-h)\tau_0+\xi_k\tau_3+\Delta\tau_1, \tag*{(1)}

where the first term describes the residual mismatch between the Zeeman energy and the shift associated with finite-momentum pairing. The resulting quasiparticle branches are E±=ξk2+Δ2±(h−Qcos⁡ϕ)E_{\pm} = \sqrt{\xi_{\mathbf{k}}^{2}+\Delta^{2}} \pm(h-Q\cos\phi).

Integrating over ξk\xi_{\mathbf{k}} and expressing the pairing interaction in terms of TcT_c gives the superconducting free-energy density relative to the normal state [3, 14, 16]:

F(Δ,Q,h)N(0)=Δ2ln⁡TTc+2πT∑n≥0[Δ2ω~n−2Re⁡(ω~n2+Δ2−ω~n)]ϕ(2)\frac{\mathcal{F}(\Delta,Q,h)}{N(0)}=\Delta^{2}\ln\frac{T}{T_c}+2\pi T\sum_{n\geq0}\left[\frac{\Delta^{2}}{\widetilde{\omega}_n}-2\operatorname{Re}\left(\sqrt{\widetilde{\omega}_n^{2}+\Delta^{2}}-\widetilde{\omega}_n\right)\right]_{\phi} \tag*{(2)}

where ω~n=ωn+i(h−Qcos⁡ϕ)\widetilde{\omega}_n=\omega_n+i(h-Q\cos\phi), ωn=πT(2n+1)\omega_n=\pi T(2n+1), and the angular brackets denote an average over the cylindrical Fermi surface.

For a cylindrical Fermi surface, the free energy depends only on the magnitude of the pairing momentum, leaving its in-plane direction degenerate. At each temperature TT and Zeeman field hh, we minimize F\mathcal{F} with respect to Δ\Delta and QQ and compare the uniform, FF, and normal states. These minimization conditions yield the gap equation and the zero-current condition, respectively. The global minimum determines the equilibrium values Δ∗\Delta^{*}, Q∗Q^{*}, and Feq\mathcal{F}_{\mathrm{eq}}. To locate the continuous upper critical line, where Δ\Delta vanishes, we expand Eq. (2) to quadratic order in Δ\Delta and minimize its coefficient over QQ. Along this line, the optimal QQ first becomes nonzero at the Lifshitz tricritical point. The Matsubara sum and angular integration are evaluated numerically, with convergence checked by increasing the cutoff and number of angular points.

Magnetotropic response and condensate relaxation

At fixed BB and TT, rotation changes h(θ)h(\theta) and the equilibrium values Δ∗\Delta_{*} and Q∗Q_{*}. The cantilever therefore probes the minimized function Feq[h(θ)]\mathcal{F}_{\mathrm{eq}}[h(\theta)], not a curvature at fixed order parameters. The chain rule gives

Δκ(θ)=F′′(h)hθ2+F′(h)hθθ,(3)\Delta\kappa(\theta)=\mathcal{F}^{\prime\prime}(h)h_{\theta}^{2}+\mathcal{F}^{\prime}(h)h_{\theta\theta}, \tag*{(3)}

where primes are total derivatives with respect to hh, hθ=b(1−ε2)sin⁡θcos⁡θ/gh_{\theta}=b(1-\varepsilon^{2})\sin\theta\cos\theta/g and hθθ=∂θhθh_{\theta\theta}=\partial_{\theta}h_{\theta}. The first term is the susceptibility contribution, and the second is the magnetization contribution [13]. Their geometric factors vary independently with angle, which allows suitable orientations to emphasize one part of the response. Since F\mathcal{F} is defined relative to the normal-state free energy, its equilibrium derivative satisfies F′=−δM\mathcal{F}^{\prime}=-\delta M, where δM=Ms−MN\delta M=M_s-M_N. Consequently, F′′=χN−χs\mathcal{F}^{\prime\prime}=\chi_N-\chi_s, with χN=2N(0)\chi_N=2N(0). For x=(Δ,Q)x=(\Delta,Q) and order-parameter Hessian Hij=∂2F/∂xi∂xjH_{ij}=\partial^{2}\mathcal{F}/\partial x_i\partial x_j, differentiation of the stationarity conditions gives

F′′=Fhh−Fhxi(H−1)ijFxjh.(4)\mathcal{F}^{\prime\prime}=\mathcal{F}_{hh}-\mathcal{F}_{hx_i}(H^{-1})_{ij}\mathcal{F}_{x_jh}. \tag*{(4)}

The first term describes the curvature at fixed order parameters, while the second accounts for their relaxation. Since HH is positive definite on a stable branch, the relaxation term lowers the free-energy curvature relative to a calculation with fixed order parameters. It can therefore enhance χs=χN−F′′\chi_s=\chi_N-\mathcal{F}^{\prime\prime} above χN\chi_N. Equations (3) and (4) connect the microscopic relaxation of the condensate to the measured frequency shift.

Phase Diagram and Spin Response

Figure 2(a) shows the mean-field phase diagram. Above the Lifshitz point (TL,hL)=(0.561,1.073)Tc(T_L,h_L)=(0.561,1.073)T_c, the uniform superconducting state undergoes a continuous transition into the normal state [14]. Below this point, the FF phase occupies a finite field interval between the first-order transition at h1h_1 and the continuous transition at hc2h_{c2} [15, 16]. For comparison, the q=0q=0 model exhibits a Pauli-limited transition at hPh_P, only slightly above h1h_1 [17]. Thus, the position of the first-order transition alone does not establish finite-momentum pairing.

Figure 2. Mean-field thermodynamics. (a) Phase diagram in the (T,h)(T,h) plane. The boundaries h1h_1 and h2≡hc2h_2 \equiv h_{c2} mark the first-order uniform-to-FF and continuous FF-to-normal transitions, respectively. The dotted curve is the q=0q = 0 Pauli boundary, and the vertical line indicates T=0.2TcT = 0.2T_c, used in panels (b) and (c). (b) Gap Δ\Delta of the uniform (blue) and FF (orange) solutions and pairing momentum Q=vFq/2Q = v_Fq/2 (black) along the T=0.2TcT = 0.2T_c cut. Solid segments denote the stable equilibrium phases, whereas dashed segments show metastable continuations. (c) Spin susceptibility χs=dM/dh\chi_s = dM/dh, normalized by the normal-state value χN\chi_N. The solid blue and orange curves show the equilibrium susceptibility in the uniform and FF phases, including relaxation of Δ\Delta and QQ. The dashed orange curve shows the FF susceptibility evaluated with Δ\Delta and QQ held fixed. The dotted curve is the q=0q = 0 control, and the horizontal gray line denotes the normal-state value.

At T=0.2TcT = 0.2T_c, the evolution of the gap Δ\Delta and pairing momentum QQ is shown in Figure 2(b). At h1=1.196Tch_1 = 1.196T_c, the gap decreases discontinuously from 1.71Tc1.71T_c to 0.57Tc0.57T_c, while QQ jumps from zero to 1.30Tc1.30T_c. With increasing field, the FF gap decreases continuously and vanishes at hc2=1.352Tch_{c2} = 1.352T_c. The dashed metastable branches indicate possible hysteresis if switching is delayed.

Figure 2(c) shows the corresponding spin susceptibility χs=dM/dh\chi_s = dM/dh, normalized to its normal-state value χN\chi_N. In the uniform superconducting state, the susceptibility is suppressed below χN\chi_N because singlet pairing suppresses spin polarization. On entering the FF phase, the susceptibility (solid orange curve) increases sharply to χs/χN=2.1\chi_s/\chi_N = 2.1 at h1h_1 and remains enhanced throughout the FF region, reaching 1.451.45 just below hc2h_{c2}. This curve includes relaxation of both Δ\Delta and QQ. For comparison, the dashed orange curve shows the response with Δ\Delta and QQ held at their initial equilibrium values. The enhancement above χN\chi_N disappears in this case, demonstrating that it originates from the readjustment of the condensate. The relaxation lowers the gap Δ\Delta and raises the optimal pairing momentum QQ, allowing a larger portion of the Fermi surface to support spin-polarized quasiparticles. At hc2h_{c2}, the susceptibility returns to its normal-state value, producing a finite step in the free-energy curvature, F′′(hc2−)=−0.89 N(0)\mathcal{F}''(h_{c2}^{-}) = -0.89\,N(0).

Since χs=dM/dh\chi_s = dM/dh, the enhanced susceptibility means that the magnetization increases more rapidly with field within the FF phase than in the normal state. At the first-order boundary h1h_1, the magnetization also exhibits a discontinuous jump ΔM=2.06N(0)Tc\Delta M = 2.06N(0)T_c, corresponding to approximately 86%86\% of χNh1\chi_N h_1, so the FF state is already strongly polarized at its lower boundary. Together, the positive magnetization jump and the negative slope of h1(T)h_1(T) imply through dh1/dT=−ΔS/ΔMdh_1/dT = -\Delta S/\Delta M that the FF phase has the larger entropy at the transition. These two effects appear differently in the magnetotropic response: the smooth enhancement of χs\chi_s modifies the regular response within the FF phase, whereas the discontinuous jump ΔM\Delta M produces the singular contribution at the first-order boundary discussed below.

Resonator Signal

Let θ1\theta_1 denote the angle at which the first-order transition from the uniform to the FF state occurs, such that h(θ1)=h1h(\theta_1)=h_1. At this angle, the equilibrium free energy develops a kink, giving a singular contribution to its angular curvature, Δκ(θ)=W1δ(θ−θ1)\Delta\kappa(\theta)=W_1\delta(\theta-\theta_1), where W1=−hθ(θ1)ΔMW_1=-h_\theta(\theta_1)\Delta M and ΔM\Delta M is the magnetization jump from the uniform to the FF state. Although its value is concentrated at a single angle, its integrated weight is finite, ∫dθ Δκ=W1\int d\theta\,\Delta\kappa=W_1. Since the sample torque is τ=−Vs dFeq/dθ\tau=-V_s\,dF_{\rm eq}/d\theta, the weight corresponds to a finite torque jump Δτ=−VsW1\Delta\tau=-V_sW_1.

During the measurement, the cantilever oscillates as θ(t)=θ0+Acos⁡(ωt)\theta(t)=\theta_0+A\cos(\omega t). The sample torque, therefore, modifies the effective angular stiffness of the cantilever and shifts its resonance frequency. In the weak-coupling limit, this frequency shift is

(Δff0)A=Vs2Sn∫−AAdx KA(x)Δκ(θ0+x),KA(x)=2A2−x2πA2.(5)\left(\frac{\Delta f}{f_0}\right)_A=\frac{V_s}{2S_n}\int_{-A}^{A}dx\,\mathcal{K}_A(x)\Delta\kappa(\theta_0+x),\qquad\mathcal{K}_A(x)=\frac{2\sqrt{A^2-x^2}}{\pi A^2}. \tag*{(5)}

Here KA(x)\mathcal{K}_A(x) is the normalized finite-amplitude kernel. Convolution with this kernel transforms the ideal delta-function singularity into the finite line shape W1KA(θ1−θ0)W_1\mathcal{K}_A(\theta_1-\theta_0) with width 2A2A and extremal curvature 2W1/(πA)2W_1/(\pi A). Its integrated weight remains W1W_1, while its peak magnitude scales as 1/A1/A.

Figure 3 summarizes the predicted magnetotropic response at T=0.2TcT=0.2T_c and ε=0.5\varepsilon=0.5. Figure 3(a) shows an angle sweep at fixed b=1.40Tcb=1.40T_c. At the first-order uniform-to-FF transition, θ1=53.1∘\theta_1=53.1^\circ, the magnetization jump produces a singular contribution with integrated weight W1=−1.22N(0)Tc2W_1=-1.22N(0)T_c^2, indicated by the arrow. Finite cantilever amplitude and angular spread broaden this singularity into the dip shown in the inset, with peak frequency shift Δf/f0≃−7.5×10−4\Delta f/f_0\simeq-7.5\times10^{-4}. Its weight is close to the q=0q=0 value, WP=−1.34N(0)Tc2W_P=-1.34N(0)T_c^2, so the first-order dip alone does not distinguish the FF phase. The clearer difference is the negative response that persists across the approximately 20∘20^\circ FF interval and ends at the continuous transition θ2=72.5∘\theta_2=72.5^\circ.

Figure 3. Magnetotropic response at T=0.2TcT = 0.2T_{\mathrm{c}} and ε=0.5\varepsilon= 0.5. (a) Angle sweep at fixed b=1.40Tcb = 1.40T_{\mathrm{c}}. Blue, orange, and gray curves show the regular response in the uniform, FF, and normal phases, respectively. The dotted curve is the q=0q = 0 control. Arrows show the integrated weights of the singular first-order contributions. The inset shows the broadened frequency shift line shape near θ1\theta_1 for oscillation amplitude A=0.2∘A = 0.2^\circ and angular spread 0.1∘0.1^\circ. (b) Field sweeps at θ=90∘\theta= 90^\circ (black) and θ=70∘\theta= 70^\circ (orange). Solid curves show the equilibrium finite-qq response, dotted curves the q=0q = 0 control, and dashed curves metastable continuations. (c) Regular response in the field-angle plane. Red and blue denote positive and negative Δκ\Delta\kappa, respectively. The solid and dashed black lines mark the uniform-to-FF and FF-to-normal boundaries, and the horizontal line corresponds to the angle sweep in panel (a).

Figure 3(b) compares field sweeps at θ=90∘\theta=90^\circ and 70∘70^\circ. For an in-plane field, hθ=0h_\theta=0, so the response depends only on the magnetization difference, Δκ=(1−ε2)b δM\Delta\kappa=(1-\varepsilon^2)b\,\delta M. At 70∘70^\circ, both the magnetization and susceptibility terms are present. Immediately below hc2h_{c2}, the response is −0.11N(0)Tc2-0.11N(0)T_c^2, which jumps to zero upon entering the normal state. Comparing these orientations, therefore, provides complementary information about δM\delta M and χs\chi_s. Figure 3(c) combines these results in the field-angle plane. The FF phase appears as a negative-response band between the first-order and continuous phase boundaries. This band disappears when qq is constrained to zero, leaving the geometric sign change near 44∘44^\circ. Deviations from the predicted dependence on h(θ)h(\theta) would indicate physics beyond the Zeeman-only model, potentially including orbital effects.

For representative Sr2_2RuO4_4 parameters [18], the predicted frequency-shift scale is approximately 4×10−64\times10^{-6} per plotted unit, above the demonstrated sensitivity of 6×10−96\times10^{-9} [12]. The actual signal will depend on background subtraction and on how orbital depairing modifies the FF region.

Discussion

The first-order dip is fixed by the magnetization jump and is not unique to finite momentum. Its integrated weight is the robust quantity, whereas its height depends on the cantilever amplitude and the angular spread of the sample. The nearly equal weights of the FF and q=0q=0 transitions show that this dip locates a thermodynamic boundary but cannot by itself identify the state on its high-field side.

A more selective prediction is the broad softening within the FF phase, followed by a finite step at the upper critical field. An experimental analysis can separate these features by repeating the sweep at several oscillation amplitudes. The singular peak should scale approximately as 1/A1/A while retaining its area, whereas the regular FF background and the upper-boundary step should remain unchanged. Comparing field sweeps at two orientations then separates the magnetization and susceptibility terms. in Eq. (3). Reversing the sweep provides an independent check for metastability, while a simultaneous dissipation signal would reveal delayed switching.

Quantitative modeling of Sr2RuO4\mathrm{Sr}_2\mathrm{RuO}_4 requires the competing Larkin–Ovchinnikov state, orbital depairing, multiband structure and spin-orbit-entangled pseudospins [5, 8, 11, 18]. These effects can shift the phase boundaries, modify the response, or restrict the stability of finite-momentum pairing. They do not alter the main distinction between a localized transition dip and a softening. Magnetotropic measurements can therefore test the thermodynamics inside the proposed high-field state rather than only locate its boundary.

References

  1. [1]A. M. Clogston, Phys. Rev. Lett. 9, 266 (1962).
  2. [2]B. S. Chandrasekhar, Appl. Phys. Lett. 1, 7 (1962).
  3. [3]P. Fulde and R. A. Ferrell, Phys. Rev. 135, A550 (1964).
  4. [4]A. I. Larkin and Yu. N. Ovchinnikov, Zh. Eksp. Teor. Fiz. 47, 1136 (1964) [Sov. Phys. JETP 20, 762 (1965)].
  5. [5]Y. Matsuda and H. Shimahara, J. Phys. Soc. Jpn. 76, 051005 (2007).
  6. [6]S. Yonezawa, T. Kajikawa, and Y. Maeno, Phys. Rev. Lett. 110, 077003 (2013).
  7. [7]S. Kittaka et al., Phys. Rev. B 90, 220502(R) (2014).
  8. [8]N. Kikugawa et al., Phys. Rev. B 93, 184513 (2016).
  9. [9]K. Kinjo et al., Science 376, 397 (2022).
  10. [10]S. Kittaka et al., J. Phys. Soc. Jpn. 95, 014704 (2026).
  11. [11]Y. Maeno, S. Yonezawa, and A. Ramírez, J. Phys. Soc. Jpn. 93, 062001 (2024).
  12. [12]K. A. Modic et al., Nat. Commun. 9, 3975 (2018).
  13. [13]A. Shekhter et al., Phys. Rev. B 108, 035111 (2023).
  14. [14]D. Saint-James, G. Sarma, and E. J. Thomas, Type II Superconductivity (Pergamon, Oxford, 1969).
  15. [15]H. Burkhardt and D. Rainer, Ann. Phys. (Leipzig) 3, 181 (1994).
  16. [16]H. Shimahara, Phys. Rev. B 50, 12760 (1994).
  17. [17]G. Sarma, J. Phys. Chem. Solids 24, 1029 (1963).
  18. [18]A. P. Mackenzie and Y. Maeno, Rev. Mod. Phys. 75, 657 (2003).

Paper details

vlnc:W_rfhyrxer
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents