betaFeedback

WorksPhysics and Astronomy

Universal Relations for Elastic Hybrid Stars and Quark Stars

Abstract

Some compact stars may contain deconfined quark matter, forming hybrid stars or quark stars. If the quark matter forms an inhomogeneous condensate in the crystalline color superconducting phase, its rigidity may be high enough to noticeably alter the stellar properties. In this paper, we investigate whether these elastic stars follow the universal relations, i.e., relations insensitive to equations of state, that have been well established for fluid stars. We improve upon previous studies by allowing quark matter in the background, static, and spherically symmetric configuration to be sheared. Such background shear can be treated in the form of an effective pressure anisotropy. We then calculate the moment of inertia II, tidal deformability λ2λ_2, and spin-induced quadrupole moment QQ of these models with pressure anisotropy. The II-λ2λ_2-QQ universal relations for the elastic hybrid (quark) star models are valid up to a variation of ≈3%(4%)\approx3\%(4\%), larger than that for typical fluid star models, when the maximal magnitude of quark matter shear modulus is considered in the crystalline color superconducting phase from realistic calculations. The uncertainty in universal relations related to the stellar compactness for these elastic star models, on the other hand, remain comparable to those for typical fluid star models. Our results demonstrate the validity of universal relations for hybrid stars and quark stars with a realistic degree of pressure anisotropy due to the crystalline color superconducting quark matter.

Introduction

The equation of state (EOS) for ultradense matter that constitutes compact stars is highly uncertain. Conventionally, compact stars are modeled using nuclear matter (NM) EOS, and are referred to as neutron stars (NSs). Alternatively, some compact stars may be hybrid stars (HSs) that contain a deconfined quark matter (QM) core inside the NM envelope [1, 2], or even quark stars (QSs) consisting of pure QM [3]. Although NSs are typically described as isotropic perfect NM fluids, the QM core of HSs and QSs may have an extremely high rigidity. For example, QM may form an inhomogeneous condensate in the crystalline color superconducting (CCS) phase [4, 5, 6, 7, 8]. After a core-collapse supernova explosion, the internal temperature of the newly formed protoneutron star rapidly drops from ∼10 MeV\sim10\,\mathrm{MeV} to ∼0.1 MeV\sim0.1\,\mathrm{MeV} within a few minutes through neutrino cooling. The formation of different quark phases inside the protoneutron star, including the CCS phase, was discussed in literature [9, 10, 11]. The shear modulus of the CCS QM in compact stars was predicted to be up to 1000 times higher than that of conventional NS crust models [12].

Stellar elasticity gives rise to pressure anisotropy [13, 14], i.e., the radial pressure being different from the tangential one. Several phenomenological anisotropy models (see, e.g., Refs. [15, 16]) were proposed to describe pressure anisotropy, where the degree of anisotropy can be parametrized. As the source of pressure anisotropy is not explicitly specified in these phenomenological models, they can be applied to describe pressure anisotropy from different physical origins, including the QM shear modulus aforementioned, strong magnetic field [17, 18, 19, 20], pion condensation [21, 22, 23], dark matter [24, 25, 26], and dark energy [27, 28]. A new theory of self-gravitating anisotropic fluids was recently formulated [29], first in Newtonian gravity based on liquid crystal [30] and then extended to general relativity [31]. On the other hand, the theory of elasticity in general relativity was formulated in Refs. [13, 14, 32], and was applied to model elastic stars [13, 32, 33]. Macroscopic properties of HSs and QSs, such as the mass-radius (MM-RR) relations, stellar compactness C≡M/RC \equiv M/R, and Tolman-Oppenheimer-Volkoff (TOV) limits (maximum-mass configurations), can be significantly altered due to elasticity [32, 33, 34].

The universal relations between CC and quantities related to multipole moments, such as the moment of inertia II, tidal deformability λ2\lambda_2, and spin-induced quadrupole moment QQ [35, 36], were identified for slowly rotating or tidally deformed NSs [37, 38, 39, 40, 41, 42, 43], in the sense that these relations are insensitive to particular EOS within the uncertainty of ∼10%\sim10\% [44]. In 2013, the II-λ2\lambda_2-QQ universality for NSs was discovered with a validity of ∼1%\sim1\% [45, 46]. Later on, the investigation on universal relations was further extended to rapidly rotating stars [47, 48, 49, 50, 51, 52, 53, 54]. We refer the readers to Ref. [44] for a review of the universal relations. While the above studies focus on fluid stars, the tidal deformation [55, 56, 57, 58] of elastic stars have also been studied. For example, Ref. [58] showed that the CC-λ2\lambda_2 relations for elastic HSs deviates from that for fluid NSs, where the background configuration of the elastic HS models is assumed to be unsheared. Likewise, the universal relations for anisotropic NSs were also found to be slightly less robust compared to those for isotropic NSs [59, 60, 61, 62]. These studies, nevertheless, employ phenomenological anisotropy models [15, 16] that parametrize the degree of pressure anisotropy, so the dependence of the deviation in the universal relations on the physical origin of pressure anisotropy is uncertain. It is also unclear whether the deviation remains noticeable when realistic elastic stellar background configurations and anisotropy models are considered when going beyond spherical symmetry. A comprehensive study of universal relations for elastic stars based on realistic sheared background configurations is still missing.

In this paper, we study the II-λ2\lambda_2-QQ-CC relations for elastic HS and QS models in the slow rotation or small tidal deformation approximation by self-consistently constructing the static, spherically symmetric background configuration of these elastic star models in general relativity [13] under the influence of QM in the CCS phase [12]. As already mentioned, Karlovini and Samuelsson [13] showed that background shear can be treated within the framework of effective pressure anisotropy. Thus, we follow the work of Ref. [59] on universal relations for anisotropic NSs to construct slowly rotating or tidally deformed elastic star models. While the II-λ2\lambda_2-QQ-CC relations have been demonstrated to be insensitive to EOS for fluid NSs, we aim to investigate their validity for the elastic stars with a realistic degree of pressure anisotropy associated with the shear modulus of QM in the CCS phase.

Let us briefly summarize our main findings. The MM-RR relations and stellar compactness CC for elastic HSs and QSs can be significantly altered when the rigidity of QM in the CCS phase is taken into account. The TOV limits of the elastic HSs and QSs are enhanced by a few percent with respect to their fluid limits in the extreme cases. For all elastic star models we examined, CC increases, but Iˉ\bar{I}, λˉ2\bar{\lambda}_2, and Qˉ\bar{Q} decrease relative to their fluid limits when comparing two configurations with the same central pressure. Systematic shifts in the II-λ2\lambda_2-QQ-CC relations associated with the QM shear modulus are found for these elastic star models. The II-λ2\lambda_2-QQ relations for the elastic HS (QS) models can show an EOS variation of ≈3%(4%)\approx3\%(4\%), more pronounced than typical fluid star models. Meanwhile, the deviation in the universal relations involving CC for these elastic stars is still compatible with those for other fluid star models.

The remainder of the paper is organized as follows. In Sec. II, we introduce the elastic HS and QS models used in this paper. In Sec. III, we present our numerical results of the II-λ2\lambda_2-QQ-CC relations for these models and discuss the impacts of the QM shear modulus on the universal relations. Finally, we summarize our findings and compare the results with other relevant literature in Sec. IV. We use the geometrized unit system with G=c=1G=c=1 throughout the paper unless otherwise specified.

Methods

In this paper, we use the quasi-Hookean EOS to describe the total energy density ρ\rho of elastic materials,

ρ=ρ~+μ~S2,(1)\rho=\tilde{\rho}+\tilde{\mu}S^2, \tag*{(1)}

where μ~\tilde{\mu} is the shear modulus and S2S^2 is the shear scalar. Equation (1) expresses ρ\rho as a sum of the unsheared energy density ρ~\tilde{\rho} and a sheared component depending on the magnitude of shear deformation. The unsheared pressure p~\tilde{p} is related to ρ~\tilde{\rho} by further providing a fluid EOS. We refer the readers to Refs. [13, 33] for more details on the quasi-Hookean EOS.

To construct HS models, we need hybrid EOS to relate p~\tilde{p} and ρ~\tilde{\rho} for the QM core and the NM envelope. We employ the constant speed of sound (CSS) parametrization [2] to construct the hybrid EOS via the Maxwell construction,

ρ~(p~)={ρNM(p~),p~≤ptrans,ρNM(ptrans)+Δρ+cQM−2(p~−ptrans),p~>ptrans.(2)\tilde{\rho}(\tilde{p}) = \begin{cases} \rho_{\mathrm{NM}}(\tilde{p}), & \tilde{p}\leq p_{\mathrm{trans}},\\ \rho_{\mathrm{NM}}(p_{\mathrm{trans}})+\Delta\rho+c_{\mathrm{QM}}^{-2}(\tilde{p}-p_{\mathrm{trans}}), & \tilde{p}>p_{\mathrm{trans}}. \end{cases} \tag*{(2)}

Here, the transition pressure ptransp_{\mathrm{trans}}, energy gap Δρ\Delta\rho, and QM sound speed squared cQM2c_{\mathrm{QM}}^2 are the CSS parameters that determine the properties of the QM part of the hybrid EOS. A NM EOS that expresses the NM energy density ρNM\rho_{\mathrm{NM}} as a function of p~\tilde{p} up to ptransp_{\mathrm{trans}} is also required. We use the Akmal-Pandharipande-Ravenhall (APR) EOS1 [63, 64, 65, 66] to construct the NM part of the hybrid EOS. Alternatively, we use the Bombaci-Lोgota (BL) EOS2 [67, 68] and the Shen-Toki-Oyamatsu-Sumiyoshi (STOS) EOS3 [69, 70, 71], at β\beta-equilibrium and the lowest temperature available (0.10.1 MeV), for constructing other hybrid EOS in order to investigate the effects of varying the NM EOS on our main results. These EOS tables are available in CompOSE [72, 73, 74]. Meanwhile, QS models can also be constructed using Eq. (2) by neglecting the NM part.

By computing the low-energy effective Lagrangian for the phonon modes that originate from the spontaneous breaking of translation invariance by the crystalline condensates, Ref. [12] derived the shear modulus of QM in the CCS phase,

μ~=2.47 MeV fm−3(Δ10 MeV)2(μq400 MeV)2,(3)\tilde{\mu}=2.47\ \mathrm{MeV\ fm}^{-3}\left(\frac{\Delta}{10\ \mathrm{MeV}}\right)^2\left(\frac{\mu_q}{400\ \mathrm{MeV}}\right)^2, \tag*{(3)}

where Δ\Delta is the gap parameter between about 5 and 25 MeV and μq\mu_q is the quark chemical potential. At high-density limit, ρ∝μq4\rho\propto\mu_q^4 for ultrarelativistic free Fermi gas, and hence the above equation reduces to a form of [33, 75]

μ~=κρ,(4)\tilde{\mu}=\kappa\sqrt{\rho}, \tag*{(4)}

where κ\kappa is a fitting coefficient to Eq. (3). In the following calculations, we adopt Eq. (4) to approximate the CCS QM shear modulus inside the HSs and QSs. The maximum value of κ\kappa is 7×1026 cm1/2 g1/2 s−27 \times10^{26}\ \mathrm{cm}^{1/2}\ \mathrm{g}^{1/2}\ \mathrm{s}^{-2} when taking Δ=25 MeV\Delta= 25\ \mathrm{MeV} in Eq. (3).

The static, spherically symmetric background configuration of the elastic HS and QS models is modeled with anisotropic pressure. The stress-energy tensor for elastic stars with scalar pressure anisotropy is given by [59]

Tαβ=ρuαuβ+prkαkβ+ptΠαβ,(5)T_{\alpha\beta} = \rho u_{\alpha}u_{\beta} + p_r k_{\alpha}k_{\beta} + p_t \Pi_{\alpha\beta}, \tag*{(5)}

where prp_r (ptp_t) is the radial (tangential) pressure, uαu^{\alpha} is the four-velocity, kαk^{\alpha} is the unit normal vector in the radial direction orthogonal to uαu^{\alpha}, and Παβ\Pi_{\alpha\beta} is the projection operator onto a two-surface orthogonal to both uαu^{\alpha} and kαk^{\alpha},

Παβ=gαβ+uαuβ−kαkβ,(6)\Pi_{\alpha\beta} = g_{\alpha\beta} + u_{\alpha}u_{\beta} - k_{\alpha}k_{\beta}, \tag*{(6)}

where gαβg_{\alpha\beta} is the spacetime metric. We calculate the stellar compactness CC of the stars from this background configuration. We refer the readers to Appendix § 1.2.1 for the derivation of the corresponding background equations.

The moment of inertia II, tidal deformability λ2\lambda_2, and spin-induced quadrupole moment QQ of the elastic HS and QS models are obtained by imposing perturbations to the metric up to the second order in slow rotation or the first order in small tidal deformation. Once again, we refer the readers to Appendix § 1.2.1 for the details of the corresponding perturbation equations. We next define the following dimensionless quantities:

Iˉ=IM3,λˉ2=λ2M5,Qˉ=QM3χ2,(7)\bar{I} = \frac{I}{M^3},\quad\bar{\lambda}_2 = \frac{\lambda_2}{M^5},\quad\bar{Q} = \frac{Q}{M^3\chi^2}, \tag*{(7)}

where χ=J/M2\chi= J/M^2 with JJ being the magnitude of the spin angular momentum, and we study their universal relations.

Based on astrophysical observations and terrestrial experiments, all the HS and QS models presented in this paper, unless otherwise specified, are compatible with the following constraints:

  1. The maximum wave speeds do not violate the causality limit (see Refs. [13, 33] for the calculation of different wave speeds in elastic materials).

  1. The MM-RR relations are compatible with the gravitational-wave event GW170817 from a binary NS merger [76], as well as the measurement of typical-mass (≈1.4M⊙\approx1.4M_{\odot}) and high-mass (≈2M⊙\approx2M_{\odot}) pulsars by NICER [77, 78].

  1. For the HS models, the transition densities on the NM side are above the nuclear saturation density ρ0≡2.6×1014 g cm−3\rho_0 \equiv2.6 \times10^{14}\ \mathrm{g\ cm}^{-3}.

  1. For the QS models, the MM-RR relations are compatible with the observation of the central compact object within the supernova remnant HESS J1731-347 [79], which is hypothesized to be a QS [80, 81].

Note that other constraints on the EOS properties were proposed. For example, the pressure at twice the nuclear saturation density is constrained to be 3.5−1.7+2.7×1034 erg cm−33.5^{+2.7}_{-1.7} \times10^{34}\ \mathrm{erg\ cm}^{-3}, at the 90% credible interval, based on the analysis of the gravitational-wave event GW170817 [76]. Reference [2] applied the Seidov stability condition [82] to define the critical energy gap Δρcrit\Delta\rho_{\mathrm{crit}},

Δρcritρtrans=12+32ptransρtrans,(8)\frac{\Delta\rho_{\mathrm{crit}}}{\rho_{\mathrm{trans}}} = \frac{1}{2} + \frac{3}{2}\frac{p_{\mathrm{trans}}}{\rho_{\mathrm{trans}}}, \tag*{(8)}

where ρtrans\rho_{\mathrm{trans}} is the energy density at ptransp_{\mathrm{trans}} for the NM EOS. When Δρ>Δρcrit\Delta\rho> \Delta\rho_{\mathrm{crit}}, a cusp or even a disconnected branch emerges at the phase transition point in the MM-RR relations for HSs (see Ref. [2] for the detailed discussions on the possible topologies of the MM-RR relations for HSs). To explore the variation in universal relations for elastic HSs and QSs within regions in the parameter space close to the boundaries of the allowed region, we do not impose these EOS property constraints explicitly on our HS and QS models.

We first construct a canonical HS model with a specific set of CSS parameters {ptrans,Δρ,cQM2}\{p_{\mathrm{trans}}, \Delta\rho, c_{\mathrm{QM}}^2\} as an example to illustrate the general impacts of the QM shear modulus on the elastic stars. After that, we scan through the CSS parameter space to examine the validity of universal relations that have been established for fluid NSs with respect to these HS models. We also discuss the impact of using different NM EOS to construct the HS models on the results. Finally, we perform the same on the elastic QS models.

Results

We now present, in turn, our results for the HS and QS models.

Hybrid stars

Canonical model

The canonical HS model adopts the APR EOS as the NM part and {ptrans,Δρ,cQM2}={6.00×1033 erg cm−3,2.00×1013 g cm−3,0.33c2}\{p_{\mathrm{trans}},\Delta\rho,c_{\mathrm{QM}}^2\} = \{6.00 \times10^{33}\ \mathrm{erg\ cm}^{-3}, 2.00 \times10^{13}\ \mathrm{g\ cm}^{-3}, 0.33c^2\} for the CSS parameters. The corresponding transition density of this hybrid EOS on the NM side is 1.34ρ01.34\rho_0, and the TOV limit is ≈2.2M⊙\approx2.2M_{\odot}, similar to that of a NS with the same NM EOS. In the following, we discuss only the behavior of configurations above 1M⊙1M_{\odot} that are astrophysically relevant. The MM-RR relations for the canonical HS models with κ\kappa up to 7×1026 cm1/2 g1/2 s−27 \times10^{26}\ \mathrm{cm}^{1/2}\ \mathrm{g}^{1/2}\ \mathrm{s}^{-2} are shown in Figure 1. The presence of the QM shear modulus effectively stiffens the EOS, and thus a more massive HS can be supported. The TOV limit is enhanced by ≈5%\approx5\% when the maximum value of κ\kappa is considered compared to the fluid limit, qualitatively and quantitatively in agreement with the results reported in Ref. [33].

Figure 1. MM-RR relations for the APR EOS model (black dashed curve) and the canonical HS model (see the main text for the definition) with different values of κ\kappa. The red dash-dotted curve represents the fluid limit, and the blue (green) solid curves represent the elastic models with κ=7×1025(26) cm1/2 g1/2 s−2\kappa= 7 \times10^{25(26)}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2}. These curves transit from translucent to opaque at 1 M⊙1\,M_{\odot}, and terminate at their TOV limits. The HS models satisfy the MM-RR relations for the gravitational-wave event GW170817 (brown error bar) at the 90% credible interval [76], as well as the pulsars PSR J0030+0451 (an updated constraint from this pulsar is also available [83]) and PSR J0740+6620 (purple error bars) measured by NICER at the 68% credible intervals [77, 78]. We also present the MM-RR relation for the central compact object within the supernova remnant HESS J1731-347 (orange error bar) at the 68% credible interval [79] as a reference. The subplot in the upper-right corner focuses on the MM-RR relations for the HS models near the TOV limits.

Next, we analyze the effects of the QM shear modulus on the universal relations for the HS models. Figure 2 shows that the presence of the QM shear modulus always increases CC, as well as decreases Iˉ\bar{I}, λˉ2\bar{\lambda}_2, and Qˉ\bar{Q} for an elastic star at any given central pressure pcp_c. Such effects are more pronounced for high-mass configurations with larger pcp_c, where the elastic QM cores are more massive.

Figure 2. CC, Iˉ\bar{I}, λˉ2\bar{\lambda}_2, and Qˉ\bar{Q} versus pcp_c for the models displayed in Figure 1. The configuration at 1 M⊙1\,M_{\odot} is indicated by a marker in each curve. All the HS models above 1 M⊙1\,M_{\odot} in the plots have a sufficiently high value of pcp_c to contain a QM core. The elastic models always have larger CC but smaller Iˉ\bar{I}, λˉ2\bar{\lambda}_2, and Qˉ\bar{Q} relative to the fluid limit at the same pcp_c.

The II-λ2\lambda_2-QQ-CC relations for the above models are further displayed in Figure 3. At the fluid limits, the II-λ2\lambda_2-QQ relations for the APR EOS model and the canonical HS model are universal, i.e., deviate from most of the other EOS, represented by the fitting formulas [44], by less than 1%. When the nonvanishing QM shear modulus is introduced to the canonical HS model, the II-λ2\lambda_2-QQ relation curves shift systematically. Qualitatively, the II-λ2\lambda_2 and II-QQ relation curves shift upward, while the QQ-λ2\lambda_2 relation curve shifts downward, when κ\kappa increases. In particular, the magnitude of the percentage relative difference of the II-QQ and QQ-λ2\lambda_2 relations from the fitting formulas reaches ≈2%\approx2\% when the maximum value of κ\kappa is considered. Similar systemic shifts are observed for the universal relations related to CC as well for the elastic HS models, where the II-CC, CC-λ2\lambda_2, and QQ-CC relation curves all shift upward when κ\kappa increases. However, the deviation in these universal relations for elastic HS models (≈5%\approx5\% at κ=7×1026 cm1/2 g1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2}) is not significant, since the APR EOS and other realistic EOS models can already deviate from the fitting formulas by a similar magnitude [44].

Figure 3. Upper: universal relations for the models displayed in Figure 1. Lower: percentage relative difference in the universal relations between the models and the fitting formulas [44]. The brown solid curves represent the fitting formulas. The maximum variability of the fitting formulas for fluid NSs is further shaded in the lower panels: (a) I−λ2I-\lambda_{2} relations, 0.7%; (b) I−QI-Q relations, 2%; (c) Q−λ2Q-\lambda_{2} relations, 2%; (d) I−CI-C relations, 10%; (e) C−λ2C-\lambda_{2} relations: 7%; (f) Q−CQ-C relations: 10%. Unlike most of the other literature, we do not take the absolute value of the percentage relative difference in the lower panels, so that the systematic shifts due to the QM shear modulus can be read off more easily.

Parameter scan

Subsequently, we vary the CSS parameters from those adopted in the canonical HS model. The II-QQ and QQ-λ2\lambda_2 relations show similar magnitude of deviation in general, which is larger than that of the II-λ2\lambda_2 relations. Hence, we focus on the discussions on the II-QQ relations to quantify the effects of the QM shear modulus in the following. We also skip the detailed discussions on the universal relations related to CC because the deviation owing

ing to the QM shear modulus cannot noticeably overwhelm the uncertainty among different NM EOS. Keeping cQM2=0.33c2c_{\mathrm{QM}}^2 = 0.33c^2 and varying ptransp_{\mathrm{trans}} (Δρ\Delta\rho) linearly between 2×10332 \times10^{33}–1034 erg cm−310^{34}\,\mathrm{erg\,cm}^{-3} (2×10132 \times10^{13}–1014 g cm−310^{14}\,\mathrm{g\,cm}^{-3}), we construct a collection of 361 hybrid EOS in total. We also construct another collection of hybrid EOS with cQM2=0.66c2c_{\mathrm{QM}}^2 = 0.66c^2, where the varying range of ptransp_{\mathrm{trans}} and Δρ\Delta\rho are slightly adjusted to produce more models that satisfy the constraints listed in § 1.1. The MM-RR relations and the deviation in the II-QQ relations for the corresponding HS models are shown in Figure 4 and Figure 5, where κ=7×1026 cm1/2 g1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2} is assumed. As a general trend, the deviation in the II-QQ relations is more pronounced for smaller values of ptransp_{\mathrm{trans}}, Δρ\Delta\rho, and cQM2c_{\mathrm{QM}}^2. For a fixed value of cQM2c_{\mathrm{QM}}^2, smaller values of ptransp_{\mathrm{trans}} and Δρ\Delta\rho usually correspond to effectively stiffer EOS. Hence, the elastic

Figure 4. (a) Same as Figure 1, but for a collection of HS models with varying values of ptransp_{\mathrm{trans}} and Δρ\Delta\rho. These models adopt cQM2=0.33c2c_{\mathrm{QM}}^2 = 0.33c^2 and κ=7×1026 cm1/2 g−1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{-1/2}\,\mathrm{s}^{-2}. The HS models violating the Seidov stability condition, i.e., with Δρ>Δρcrit\Delta\rho> \Delta\rho_{\mathrm{crit}}, are shown in cyan, and the remaining are shown in gray. (b) Deviation in the II-QQ relations, which represent the extrema of percentage relative difference between these HS models and the fitting formulas [44], in ptrans/ρtransp_{\mathrm{trans}}/\rho_{\mathrm{trans}}-Δρ/ρtrans\Delta\rho/\rho_{\mathrm{trans}} plane. To demonstrate the parameter space explored, we also use black dots to indicate the models that are not fully compatible with all the constraints listed in § 1.1. The region where the Seidov stability condition is violated is shaded in cyan. The two purple dash-dotted vertical lines indicate the position where ρtrans=1.0\rho_{\mathrm{trans}} = 1.0 and 1.5ρ01.5\rho_0, respectively. In both panels, the particular model with the largest magnitude of deviation in the II-QQ relations is highlighted in red.

Figure 5. Same as Figure 4, but for HS models with cQM2=0.66c2c_{\mathrm{QM}}^2 = 0.66c^2.

Figure 7. Same as Fig. 5, but for HS models with the BL EOS being the NM part.

HS model with the largest magnitude of deviation in the II-QQ relations usually appears near the upper-right edge in the MM-RR relations among all models. To access the largest possible magnitude of deviation, we additionally construct several hybrid EOS with even smaller values of these CSS parameters. At cQM2=0.24c2c_{\mathrm{QM}}^{2}=0.24c^{2}, we find a few HS models with deviation ≈2.7%\approx2.7\% in the II-QQ relations. The hybrid EOS are too soft to produce massive enough models that are compatible with the MM-RR relation measurement of the pulsar PSR J0740+6620 with further smaller values of cQM2c_{\mathrm{QM}}^{2}. Thus, we conclude that the II-λ2\lambda_{2}-QQ relations for the elastic HS models are valid up to 3%.

We remark that a few HS models presented in Figure 4 and Figure 5 are also compatible with the MM-RR relation for the central compact object within the supernova remnant HESS J1731-347. Also, some HS models in these figures lie in the region where the Seidov stability condition is violated, i.e., with Δρ>Δρcrit\Delta\rho> \Delta\rho_{\mathrm{crit}} [see Eq. (8) for the definition of Δρcrit\Delta\rho_{\mathrm{crit}}]. In these exceptional cases, we do not observe significantly larger deviation in the universal relations.

To estimate the sensitivity of the universal relations for elastic HSs to the NM part of hybrid EOS, we repeat the above calculations using the BL and STOS EOS for constructing the hybrid EOS. The APR, BL, and STOS EOS have low, intermediate, and high stiffness in terms of sound speed squared cQM2=dpdρc_{\mathrm{QM}}^{2}=\frac{d p}{d \rho} below ≈3ρ0\approx3\rho_{0}, respectively.4 The calculation results are shown in Figure 6–Figure 9 for these new HS models.

M-R relations for HS models with the BL EOS being the NM part

(a)

I-Q relations for HS models with the BL EOS being the NM part

(b)

Figure 6. Same as Fig. 4, but for HS models with the BL EOS being the NM part.

Figure 9. Same as Fig. 5, but for HS models with the STOS EOS being the NM part.

As a whole, the effects of the QM shear modulus on the new HS models using the BL EOS, such as the enhancement of the TOV limits and the magnitude of deviation in the universal relations, are similar to those on the original HS models using the APR EOS. In Figure 8 and Figure 9, meanwhile, we find that several HS models using the STOS EOS feature a strong phase transition, and hence a disconnected branch emerges in the MM-RR relations. The deviation in the II-QQ relations change sign when the phase transition is sufficiently strong. Figure 10 shows the II-QQ relations for the HS model with {ptrans,Δρ,cQM2}={2.20×1034 erg cm−3,3.55×1013 g cm−3,0.66 c2}\{p_{\mathrm{trans}},\Delta\rho,c_{\mathrm{QM}}^{2}\}=\{2.20\times10^{34}\ {\rm erg\,cm}^{-3},3.55\times10^{13}\ {\rm g\,cm}^{-3},0.66\,c^{2}\}, i.e., the particular model with the largest magnitude of deviation in the II-QQ relations, as an example to elucidate such a phenomenon. At the onset of phase transition, a kink appears in the II-QQ relation curve at Qˉ≈15\bar{Q}\approx15, and the curve bends downward drastically until Qˉ≈10\bar{Q}\approx10. Even at the fluid limit, the magnitude of deviation reaches ≈2.5%\approx2.5\% where the bending curve reaches the minimum. In fact, it has been shown that fluid HSs with a strong phase transition have an uncertainty up to ∼3%\sim3\% in the II-Λ2\Lambda_{2}-QQ relations [51], which supports our finding in Figure 10.

M-R and I-Q relations for HS models with the STOS EOS as the NM part

Figure 8. Same as Fig. 4, but for HS models with the STOS EOS being the NM part.

Figure 10. Same as in Figure 3(b), but for the HS model highlighted in red displayed in Figure 9 with different values of κ\kappa. This model features a strong phase transition with Δρ\Delta\rho considerably larger than Δρcrit\Delta\rho_{\mathrm{crit}}. A kink appears in the II-QQ relation curves at Qˉ≈15\bar{Q} \approx15 where the phase transition occurs. The deviation in the II-QQ relations reach the extrema at Qˉ≈10\bar{Q} \approx10 near the phase transition point instead of the TOV limits.

On the other hand, the general effects of the QM shear modulus, as illustrated in Figure 3(b), are to shift the II-QQ relation curves upward. For this particular model, the deviation in the II-QQ relations reach the extremum near the phase transition point, in contrast to many other HS models aforementioned that reach the extrema near the TOV limits, even if κ=7×1026 cm1/2 g1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2} is considered. The extremum near the phase transition point is not related to the QM shear modulus, which mainly affects the II-QQ relations for the high-mass configurations. For the majority of elastic HS models without featuring a strong phase transition, the universal relation curves are qualitatively similar to those of the canonical HS model presented in Figure 3. In summary, we believe our conclusions on the general impacts of the QM shear modulus on the elastic stars do not depend sensitively on the NM part of the hybrid EOS.

Quark stars

We next study QS models. We set ptrans=0p_{\mathrm{trans}} = 0 and vary the other two CSS parameters.5 The MM-RR and II-QQ relations for such a collection of elastic QS models with κ=7×1026 cm1/2 g1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2} are shown in Figure 11. In comparison to the previous section regarding the universal relations for the elastic HSs, we observe slightly larger deviation in these relations for the elastic QSs.

M–R and I–Q relations for quark-star models

Figure 11. (a) Same as in Figure 4(a), but for QS models with varying values of cQM2c_{\mathrm{QM}}^{2} and Δρ\Delta\rho. (b) Same as in Figure 4(b), but in cQM2c_{\mathrm{QM}}^{2}–Δρ\Delta\rho plane.

Although these QS models can satisfy the II-λ2\lambda_2-QQ universality at the fluid limits, the deviation can reach ≈4%\approx4\% when κ=7×1026 cm1/2 g1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2} is considered. Similar to the canonical HS model, the II-λ2\lambda_2 and II-QQ relation curves for the QS models shift upward, and the QQ-λ2\lambda_2 relation curve shifts downward when κ\kappa increases. The above comparison indicates that the systematic shifts in the II-λ2\lambda_2-QQ relation curves do not qualitatively depend on the presence of the fluid NM envelope.

The universal relations related to CC are less robust for low-mass QSs, which have significantly smaller radii, and hence larger CC, relative to the radius of NSs at the same mass. Within the CSS parametrization framework, QS models with different surface densities can be constructed by tuning the value of Δρ\Delta\rho while keeping cQM2c_{\mathrm{QM}}^2 constant. Figure 12 shows the II-CC relations for a few QS models as an example. They adopt different values of Δρ\Delta\rho but the same value of cQM2=0.27 c2c_{\mathrm{QM}}^2 = 0.27\,c^2. From our numerical results, the II-CC relations for these QS models are almost identical at the fluid limits (see [84, 85] for relevant discussions from the post-Minkowskian expansion approach and the connection to incompressible stars). For the same set of QS models with κ=7×1026 cm1/2 g1/2 s−2\kappa= 7 \times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2}, on the other hand, the curves vary by ∼1%\sim1\% near the TOV limits, i.e., the presence of the QM shear modulus breaks the degeneracy of these QS models with different values of Δρ\Delta\rho but same cQM2c_{\mathrm{QM}}^2, introducing systematic shifts to the curves with respect to the fluid limits. Likewise, variations in the CC-λ2\lambda_2 and QQ-CC relation curves with a similar magnitude are observed for these elastic QS models.

Relations for quark-star models with different values of $\Delta\rho$

Figure 12. Same as in Figure 3(d), but for a few QS models with cQM2=0.27 c2c_{\mathrm{QM}}^{2}=0.27\,c^{2} and different values of Δρ\Delta\rho. The dash-dotted curve (overlapping with each other in the figure) represents the fluid limits, and the solid curves represent the elastic models with κ=7×1026 cm1/2 g1/2 s−2\kappa=7\times10^{26}\,\mathrm{cm}^{1/2}\,\mathrm{g}^{1/2}\,\mathrm{s}^{-2}. This figure focuses on the curves near the TOV limits, where the variation among the solid curves becomes noticeable.

Finally, we remark that the magnitude of deviation in the universal relations for elastic stars reported above is obtained based on the calculation results of the QM shear modulus by Ref. [12]. If an even larger value of QM shear modulus is realized in future studies, one would expect even larger deviation in these universal relations for elastic stars in our formulation.

Conclusions and Discussions

In this paper, we investigated the II-λ2\lambda_2-QQ-CC relations for elastic HS and QSs in the slow rotation and small tidal deformation approximation. The corresponding background and perturbation equations were obtained using the stress-energy tensor with scalar pressure anisotropy. In comparison to the earlier study of Ref. [59] employing the same formulation, where phenomenological anisotropy models were assumed, we adopted a fully relativistic theory of elasticity to describe the nonlinear stress-strain relation [13]. Hence, we were able to construct the sheared background of elastic stars in a self-consistent manner, with a physical origin of pressure anisotropy associated with the QM in the CCS phase. As a whole, we found that the deviation in the II-λ2\lambda_2-QQ-CC relations for our elastic star models from the fluid limits is smaller than the results reported in Ref. [59] within the anisotropy range of $\lambda_{\mathrm{H}}, \lambda_{\mathrm{BL}} = [-2, 2]`.

The studies in Refs. [55, 56, 58] investigated the I−λ2I-\lambda_{2} and C−λ2C-\lambda_{2} relations for elastic HS and QSs containing the CCS QM with unsheared background configuration models. Although λ2\lambda_{2} of these elastic stars were significantly reduced relative to the fluid limits, II and CC remained unchanged. Thus, a large deviation was found in their I−λ2I-\lambda_{2} and C−λ2C-\lambda_{2} relations from the fluid limits up to tens of percentages, purely due to the reduction in λ2\lambda_{2}. For our elastic star models with a sheared background, on the other hand, all these quantities undergo systematic shifts relative to the fluid limits at any pcp_{c} (see Figure 2). Take the C−λ2C-\lambda_{2} relation as an example. In Ref. [58], Figure 1 shows the deviation in the C−λ2C-\lambda_{2} relations for their elastic HS models from the fitting formula for fluid NSs (the same fitting formula as we used in this paper). The curves representing the elastic HS models lie below the fitting formula because λ2\lambda_{2} is remarkably reduced by the QM shear modulus, whereas CC remains compatible with typical fluid NS models. In Figure 3, in contrast, the C−λ2C-\lambda_{2} relation curves for our elastic HS models are above the fitting formula as well as the fluid limit curve, in which λ2\lambda_{2} (CC) decreases (increases) when the effects of the QM shear modulus are taken into account. The resulting deviation in the C−λ2C-\lambda_{2} relations from the fitting formula for our models, therefore, is qualitatively different from that reported in Ref. [58]. Also, the magnitude of deviation in our cases is somehow canceled out by the mutual shift in CC and λ2\lambda_{2} of the elastic stars.

The results in this paper appear to be different from the conclusion of previous work on solid QSs, where the I−λ2I-\lambda_{2} relations are found to be significantly deviate from the fluid case by up to ∼30%\sim30\%. This deviation can either arise from the assumption in the previous work, where the background star is taken to be unsheared, or from the assumption in the formalism we employ here. Strictly speaking, the formulation we employ here for the nonradial perturbations (i.e., on determining λ2\lambda_{2} and QQ) does not fully capture the elastic deformation. In particular, some off-diagonal terms in the spatial part of the perturbed stress-energy tensor are missing due to a restrictive assumption on the solid EOS in the perturbed configuration6. However, these missing components are proportional to the transverse sound speeds (see Ref. [86]), which are much smaller than the perturbations in the diagonal components that scale as the longitudinal sound speeds [33], even at the same perturbative level. Therefore, we expect the results reported here to serve as a reasonable first approximation of the true elastic deformations based on the existing formalism for anisotropic stars. Our next goal is to develop the full perturbation equations for polar deformations based on relativistic elastic theory [86, 87].

Another important direction for future work is to investigate the origin of universality. Reference [88] pointed out that isodensity contours inside stars become increasingly self-similar as CC grows. This observation suggests that an approximate, emergent symmetry may underlie the origin of universality. The authors further showed that the EOS variation in the II-λ2\lambda_2-QQ relations increases as the isodensity contours deviate from self-similarity. Since self-similarity becomes exact in the limit of incompressible stars, this evidence supports the idea that universality arises because realistic NSs are effectively ”close to” incompressible configurations. This conjecture was further strengthened in Ref. [89], where the authors explicitly demonstrated that the EOS dependence in the universal relations between λ2\lambda_2 and the fundamental-mode oscillation frequency is suppressed by adopting a modified Tolman VII model in the Newtonian limit and perturbing about the incompressible limit (see also Refs. [43, 90, 91, 92] for additional studies exploring possible origins of universality in various relations). It would be interesting to determine whether the origin of universality can be understood at a more fundamental level.

Acknowledgments

We thank Zoey Zhiyuan Dong for helpful discussions. C. M. Y. is supported by grants from the Research Grant Council of the Hong Kong Special Administrative Region, China (Projects No. 14300320 and No. 14304322) and the European Union through ERC Synergy Grant HeavyMetal No. 101071865. S. Y. L. acknowledges support from Montana NASA EPSCoR Research Infrastructure Development under Award No. 80NSSC22M0042. K. Y. acknowledges support from NSF Grant No. PHY2339969 and the Owens Family Foundation.

Background and Perturbation Equations

In this appendix, we review how to obtain the perturbation equations of a slowly rotating, tidally deformed elastic star with a static, spherically symmetric, and sheared background. We introduce metric perturbations δw\delta w, δh\delta h, δk\delta k, and δm\delta m, up to the second order in slow rotation, to the metric ansatz of a static, spherically symmetric star in the Schwarzschild coordinates (tˉ,rˉ,θ,ϕ)(\bar{t},\bar{r},\theta,\phi) [46, 59],

ds2=−eν(1+2ϵ2δh)dt2+eλ(1+2ϵ2δmrˉ−2m)drˉ2+rˉ2(1+2ϵ2δk){dθ2+sin⁡2θ(dϕ−ϵ(Ω−δw))2}+O(ϵ3),(9)\mathrm{d}s^2=-e^{\nu}\left(1+2\epsilon^2\delta h\right)\mathrm{d}t^2+e^{\lambda}\left(1+\frac{2\epsilon^2\delta m}{\bar{r}-2m}\right)\mathrm{d}\bar{r}^2+\bar{r}^2\left(1+2\epsilon^2\delta k\right)\left\{\mathrm{d}\theta^2+\sin^2\theta\left(\mathrm{d}\phi-\epsilon\left(\Omega-\delta w\right)\right)^2\right\}+\mathcal{O}\left(\epsilon^3\right), \tag*{(9)}

where ϵ\epsilon is a bookkeeping parameter to count the order of slow rotation and Ω\Omega is the angular frequency of the star. ν(rˉ)\nu(\bar{r}) and λ(rˉ)\lambda(\bar{r}) are the metric functions, where eλe^\lambda can be written as

eλ(rˉ)=[1−2m(rˉ)rˉ]−1,(10)e^{\lambda(\bar{r})}=\left[1-\frac{2m(\bar{r})}{\bar{r}}\right]^{-1}, \tag*{(10)}

with mm being the gravitational mass enclosed within a sphere of radius rˉ\bar{r}.

We decompose the metric perturbations in terms of Legendre polynomials,

δw(rˉ,θ)=ω1(rˉ)P1′(cos⁡θ),(11)\delta w(\bar{r},\theta)=\omega_1(\bar{r})P_1'(\cos\theta), \tag*{(11)}
δh(rˉ,θ)=h0(rˉ)+h2(rˉ)P2(cos⁡θ),(12)\delta h(\bar{r},\theta)=h_0(\bar{r})+h_2(\bar{r})P_2(\cos\theta), \tag*{(12)}
δm(rˉ,θ)=m0(rˉ)+m2(rˉ)P2(cos⁡θ),(13)\delta m(\bar{r},\theta)=m_0(\bar{r})+m_2(\bar{r})P_2(\cos\theta), \tag*{(13)}
δk(rˉ,θ)=k2(rˉ)P2(cos⁡θ),(14)\delta k(\bar{r},\theta)=k_2(\bar{r})P_2(\cos\theta), \tag*{(14)}

where Pl(cos⁡θ)P_l(\cos\theta) is the llth order Legendre polynomial and Pl′(cos⁡θ)=dPl(cos⁡θ)/dcos⁡θP_l'(\cos\theta)=\mathrm{d}P_l(\cos\theta)/\mathrm{d}\cos\theta. Further, we introduce a new radial coordinate rr via a new function ξ\xi,

rˉ(r,θ)=r+ϵ2ξ(r,θ)+O(ϵ3),(15)\bar{r}(r,\theta)=r+\epsilon^2\xi(r,\theta)+\mathcal{O}\left(\epsilon^3\right), \tag*{(15)}

and the Legendre decomposition of ξ\xi is given by

ξ(r,θ)=ξ0(r)+ξ2(r)P2(cos⁡θ).(16)\xi(r,\theta)=\xi_0(r)+\xi_2(r)P_2(\cos\theta). \tag*{(16)}

We introduce the above radial coordinate transformation such that the perturbed energy density ρ[rˉ(r,θ)]\rho[\bar{r}(r,\theta)] is the same as the unperturbed energy density at rr. By substituting Eq. (9) and the stress-energy tensor given by Eq. (5) into the Einstein equations, we obtain the background and perturbation equations for the elastic star from the equation of motion.

Background equations

At O(ϵ0)\mathcal{O}(\epsilon^{0}), we obtain the TOV equations from the equation of motion,

dmdr=4πr2ρ,(17)\frac{dm}{dr}=4\pi r^{2}\rho, \tag*{(17)}
dνdr=4πr3pr+mr(r−2m),(18)\frac{d\nu}{dr}=\frac{4\pi r^{3}p_{r}+m}{r(r-2m)}, \tag*{(18)}
dprdr=−(ρ+pr)4πpr3+mr(r−2m)−2σ0r.(19)\frac{dp_{r}}{dr}=-(\rho+p_{r})\frac{4\pi pr^{3}+m}{r(r-2m)}-\frac{2\sigma_{0}}{r}. \tag*{(19)}

Here, we introduce the background anisotropy σ0≡pr−pt\sigma_{0}\equiv p_{r}-p_{t} to denote the difference between prp_{r} and ptp_{t}. Following [13, 33], the TOV equations are further reformulated into a new set of differential equations, with {m,p~,z}\{m,\tilde{p},z\} being independent variables,

dmdr=4πr2ρ,(20)\frac{dm}{dr}=4\pi r^{2}\rho, \tag*{(20)}
dp~dr=β~rβr{−(ρ+pr)4πpr3+mr−2m−2σ0+4(eλ/2z−1)[μ~+3μ~S2+σ02(Ω~−1)]},(21)\frac{d\tilde{p}}{dr}=\frac{\tilde{\beta}}{r\beta_{r}}\left\{-(\rho+p_{r})\frac{4\pi pr^{3}+m}{r-2m}-2\sigma_{0}+4\left(e^{\lambda/2}z-1\right)\left[\tilde{\mu}+3\tilde{\mu}S^{2}+\frac{\sigma_{0}}{2}\left(\tilde{\Omega}-1\right)\right]\right\}, \tag*{(21)}
dzdr=zr[rβ~dp~dr−3(eλ/2z−1)],(22)\frac{dz}{dr}=\frac{z}{r}\left[\frac{r}{\tilde{\beta}}\frac{d\tilde{p}}{dr}-3\left(e^{\lambda/2}z-1\right)\right], \tag*{(22)}

where

σ0=−μ~2(z−2−z2),(23)\sigma_{0}=-\frac{\tilde{\mu}}{2}\left(z^{-2}-z^{2}\right), \tag*{(23)}
S2=16(z−1−z)2,(24)S^{2}=\frac{1}{6}\left(z^{-1}-z\right)^{2}, \tag*{(24)}
pr=p~+(Ω~−1)μ~S2+23σ0,(25)p_{r}=\tilde{p}+\left(\tilde{\Omega}-1\right)\tilde{\mu}S^{2}+\frac{2}{3}\sigma_{0}, \tag*{(25)}
β~=(ρ~+p~)dp~dρ~,(26)\tilde{\beta}=(\tilde{\rho}+\tilde{p})\frac{d\tilde{p}}{d\tilde{\rho}}, \tag*{(26)}
βr=β~+43μ~+[Ω~(Ω~−1)+β~dΩ~dp~]μ~S2+4[μ~S2+σ03(Ω~−12)],(27)\beta_{r}=\tilde{\beta}+\frac{4}{3}\tilde{\mu}+\left[\tilde{\Omega}\left(\tilde{\Omega}-1\right)+\tilde{\beta}\frac{d\tilde{\Omega}}{d\tilde{p}}\right]\tilde{\mu}S^{2}+4\left[\tilde{\mu}S^{2}+\frac{\sigma_{0}}{3}\left(\tilde{\Omega}-\frac{1}{2}\right)\right], \tag*{(27)}
Ω~=β~μ~dμ~dp~,(28)\tilde{\Omega}=\frac{\tilde{\beta}}{\tilde{\mu}}\frac{d\tilde{\mu}}{d\tilde{p}}, \tag*{(28)}

Here, z=nr/ntz=n_{r}/n_{t}, where nrn_{r} (ntn_{t}) is the linear particle number density in radial (tangential) direction. The variables with an overhead tilde represent the unsheared components.

We integrate Eqs. (20)–(22) under the following boundary conditions to obtain the background and σ0\sigma_{0} profiles of the elastic star.

The boundary conditions near r=0r=0 are given by

m=43πρcr3+O(r4),(29)m=\frac{4}{3}\pi\rho_{c}r^{3}+\mathcal{O}(r^{4}), \tag*{(29)}
p~=pc−2πβ~c(ρc+pc)(ρc+3pc)−4μ~cρc3(β~c+43μ~c)r2+O(r3),(30)\tilde{p}=p_{c}-2\pi\tilde{\beta}_{c}\frac{(\rho_{c}+p_{c})(\rho_{c}+3p_{c})-4\tilde{\mu}_{c}\rho_{c}}{3\left(\tilde{\beta}_{c}+\frac{4}{3}\tilde{\mu}_{c}\right)}r^{2}+\mathcal{O}(r^{3}), \tag*{(30)}
z~=1−4π(ρc+pc)(ρc+3pc)+3β~cρc15(β~c+43μ~c)r2+O(r3),(31)\tilde{z}=1-4\pi\frac{(\rho_{c}+p_{c})(\rho_{c}+3p_{c})+3\tilde{\beta}_{c}\rho_{c}}{15\left(\tilde{\beta}_{c}+\frac{4}{3}\tilde{\mu}_{c}\right)}r^{2}+\mathcal{O}(r^{3}), \tag*{(31)}

where the variables with a subscript c represent the values at the center, which are unsheared by construction. From the solid quark core to the fluid envelope in the HS models (or the vacuum in the QS models), σ0\sigma_{0} is discontinuous. By requiring prp_{r} to be continuous across the core-envelope interface, we substitute Eqs. (23) and (24) into Eq. (25) to obtain the junction condition on p~\tilde{p},

p~+=p~−−μ~−6[(1−Ω~−)(z−−1−z−)2+2(z−−2−z−2)],(32)\tilde{p}_{+}=\tilde{p}_{-}-\frac{\tilde{\mu}_{-}}{6}\left[\left(1-\tilde{\Omega}_{-}\right)\left(z_{-}^{-1}-z_{-}\right)^{2}+2\left(z_{-}^{-2}-z_{-}^{2}\right)\right], \tag*{(32)}

where the variables with a subscript −- (++) represent the values evaluated at the core (envelope) side of the interface. For the HS models with a fluid envelope, p~+=ptrans\tilde{p}_{+}=p_{\mathrm{trans}} at the outer side of the interface; for the QS models, p~+=0\tilde{p}_{+}=0 as the vacuum is reached directly outside the solid quark core. We refer the readers to Refs. [13, 33] for more discussions on this junction condition. The boundary condition on p~\tilde{p} at the stellar surface is given by

pr=0,(33)p_{r}=0, \tag*{(33)}

i.e., a vanishing radial pressure. The total gravitational mass MM and radius RR of the star are determined when the above boundary condition is met. Finally, the boundary condition on eνe^{\nu} at RR is given by

eν=1−2MR.(34)e^{\nu}=1-\frac{2M}{R}. \tag*{(34)}

Perturbation equations

Let us next review the perturbation equations. At O(ϵ1)\mathcal{O}(\epsilon^{1}), the equation of motion reads

d2ω1dr2=4πr2(ρ+pr)eλ−1rdω1dr+16π(ρ+pr−σ0)eλω1,(35)\frac{d^{2}\omega_{1}}{dr^{2}}=\frac{4\pi r^{2}(\rho+p_{r})e^{\lambda}-1}{r}\frac{d\omega_{1}}{dr}+16\pi(\rho+p_{r}-\sigma_{0})e^{\lambda}\omega_{1}, \tag*{(35)}

and at O(ϵ2)\mathcal{O}(\epsilon^{2}), the equation of motion reads

σ2(2)=(ρ+pr−σ0)h2−σ0r−2mm2+[(ρ+pr)(4πprr3+m)r(r−2m)+dσ0dr+2σ0r]ξ2+r23(ρ+pr−σ0)e−νω12,(36)\sigma_{2}^{(2)} = (\rho+ p_r - \sigma_0)h_2 - \frac{\sigma_0}{r-2m}m_2 + \left[\frac{(\rho+p_r)(4\pi p_r r^3+m)}{r(r-2m)}+\frac{\mathrm{d}\sigma_0}{\mathrm{d}r}+\frac{2\sigma_0}{r}\right]\xi_2+\frac{r^2}{3}(\rho+p_r-\sigma_0)e^{-\nu}\omega_1^2, \tag*{(36)}
m2=−re−λh2+r46e−(ν+λ)[re−λ(dω1dr)2+16πrω12(ρ+pr−σ0)],(37)m_2=-re^{-\lambda}h_2+\frac{r^4}{6}e^{-(\nu+\lambda)}\left[re^{-\lambda}\left(\frac{\mathrm{d}\omega_1}{\mathrm{d}r}\right)^2+16\pi r\omega_1^2(\rho+p_r-\sigma_0)\right], \tag*{(37)}
dh2dr=−4πprr3−m+rreλdk2dr+3reλh2+2reλk2+1+8πprr2r2e2λm2+r312e−ν(dω1dr)2+4π(ρ+pr)4πprr3+mre2λξ2+8πeλσ0ξ2,(38)\begin{aligned} \frac{\mathrm{d}h_2}{\mathrm{d}r}={}&-\frac{4\pi p_r r^3-m+r}{r}e^\lambda\frac{\mathrm{d}k_2}{\mathrm{d}r}+\frac{3}{r}e^\lambda h_2+\frac{2}{r}e^\lambda k_2+\frac{1+8\pi p_r r^2}{r^2}e^{2\lambda}m_2+\frac{r^3}{12}e^{-\nu}\left(\frac{\mathrm{d}\omega_1}{\mathrm{d}r}\right)^2\\ &+4\pi(\rho+p_r)\frac{4\pi p_r r^3+m}{r}e^{2\lambda}\xi_2+8\pi e^\lambda\sigma_0\xi_2, \tag*{(38)} \end{aligned}
dk2dr=−dh2dr−4πprr3+3m−rr2eλh2+4πprr3−m+rr3e2λm2,(39)\frac{\mathrm{d}k_2}{\mathrm{d}r}=-\frac{\mathrm{d}h_2}{\mathrm{d}r}-\frac{4\pi p_r r^3+3m-r}{r^2}e^\lambda h_2+\frac{4\pi p_r r^3-m+r}{r^3}e^{2\lambda}m_2, \tag*{(39)}
dξ2dr=r−2m6r[(ρ+pr)(4πprr3+m)+2(r−2m)σ0]{−6r2(ρ+pr)dh2dr−12σ0r2dk2dr−3[r2(ρ+pr)d2νdr2−4σ0]ξ2−12rσ0(2)+2r3(ρ+pr−σ0)e−νω1[(rdνdr−2)ω1−2rdω1dr]}.(40)\begin{aligned} \frac{\mathrm{d}\xi_2}{\mathrm{d}r}={}&\frac{r-2m}{6r\left[(\rho+p_r)(4\pi p_r r^3+m)+2(r-2m)\sigma_0\right]}\Biggl\{-6r^2(\rho+p_r)\frac{\mathrm{d}h_2}{\mathrm{d}r}-12\sigma_0r^2\frac{\mathrm{d}k_2}{\mathrm{d}r}\\ &-3\left[r^2(\rho+p_r)\frac{\mathrm{d}^2\nu}{\mathrm{d}r^2}-4\sigma_0\right]\xi_2-12r\sigma_0^{(2)}+2r^3(\rho+p_r-\sigma_0)e^{-\nu}\omega_1\left[\left(r\frac{\mathrm{d}\nu}{\mathrm{d}r}-2\right)\omega_1-2r\frac{\mathrm{d}\omega_1}{\mathrm{d}r}\right]\Biggr\}. \tag*{(40)} \end{aligned}

The boundary conditions near r=0r=0 are given by

ω1=ω1c+85π(pc+ρc)ω1cr2+O(r3),(41)\omega_1=\omega_{1c}+\frac{8}{5}\pi(p_c+\rho_c)\omega_{1c}r^2+O(r^3), \tag*{(41)}
h2=C1r2+O(r3),(42)h_2=C_1r^2+O(r^3), \tag*{(42)}
k2=−C1r2+O(r3),(43)k_2=-C_1r^2+O(r^3), \tag*{(43)}
m2=−C1r3+O(r4),(44)m_2=-C_1r^3+O(r^4), \tag*{(44)}
ξ2=−(3C1eνc+ω1c2)(pc+ρc)2[2π(3pc+ρc)(pc+ρc)+3σ02]eνcr+O(r2),(45)\xi_2=-\frac{(3C_1e^{\nu_c}+\omega_{1c}^2)(p_c+\rho_c)}{2[2\pi(3p_c+\rho_c)(p_c+\rho_c)+3\sigma_{02}]e^{\nu_c}}r+O(r^2), \tag*{(45)}
σ2(2)=−(3C1eνc+ω1c2)(pc+ρc)σ02[2π(3pc+ρc)(pc+ρc)+3σ02]eνcr2+O(r3),(46)\sigma_2^{(2)}=-\frac{(3C_1e^{\nu_c}+\omega_{1c}^2)(p_c+\rho_c)\sigma_{02}}{[2\pi(3p_c+\rho_c)(p_c+\rho_c)+3\sigma_{02}]e^{\nu_c}}r^2+O(r^3), \tag*{(46)}

where σ02\sigma_{02} is a Taylor coefficient given by

σ0=σ02r2+O(r3).(47)\sigma_0=\sigma_{02}r^2+O(r^3). \tag*{(47)}

Together with the background configuration of the elastic star, we integrate Eq. (35) and Eqs. (38)–(40) to obtain the interior solution of ω1\omega_1, h2h_2, k2k_2, and ξ2\xi_2, respectively. The constants ω1c\omega_{1c} and C1C_1 are determined by matching the interior and exterior solutions on the stellar surface at RR. Subsequently, the moment of inertia II and spin-induced quadrupole moment QQ of a slowly rotating, isolated star can be extracted from the exterior solutions ω1ext\omega_1^{\mathrm{ext}} and h2exth_2^{\mathrm{ext}}, respectively,

ω1ext=Ω(1−2Ir3),(48)\omega_1^{\mathrm{ext}}=\Omega\left(1-\frac{2I}{r^3}\right), \tag*{(48)}
h2ext=−Qr3+O(1r4).(49)h_2^{\mathrm{ext}}=-\frac{Q}{r^3}+O\left(\frac{1}{r^4}\right). \tag*{(49)}

Meanwhile, the tidal deformability λ2\lambda_2 of a nonrotating, tidally deformed star can be calculated by solving Eqs. (36)–(40) with ω1=0\omega_1=0. λ2\lambda_2 is related to the tidal Love number k2tidk_2^{\mathrm{tid}} as

λ2=23k2tidR5.(50)\lambda_2=\frac{2}{3}k_2^{\mathrm{tid}}R^5. \tag*{(50)}

k2tidk_2^{\mathrm{tid}} can be calculated from

k2tid=85C5(1−2C)2[2+2C(y−1)−y]×{2C[6−3y+3C(5y−8)]+4C3[13−11y+C(3y−2)+2C2(1+y)]+3(1−2C)2[2−y+2C(y−1)]ln⁡(1−2C)}−1,(51)\begin{aligned} k_2^{\mathrm{tid}}={}&\frac{8}{5}C^5(1-2C)^2[2+2C(y-1)-y]\\ &\times\{2C[6-3y+3C(5y-8)]\\ &+4C^3[13-11y+C(3y-2)+2C^2(1+y)]\\ &+3(1-2C)^2[2-y+2C(y-1)]\ln(1-2C)\}^{-1}, \tag*{(51)} \end{aligned}

where

y=rh2extdh2extdr∣r=R.(52)y=\left.\frac{r}{h_2^{\mathrm{ext}}}\frac{\mathrm{d}h_2^{\mathrm{ext}}}{\mathrm{d}r}\right|_{r=R}. \tag*{(52)}

We refer the readers to Refs. [35, 36, 46, 59] for more detail on matching the interior and exterior solutions of ω1\omega_1, h2h_2, k2k_2, and ξ2\xi_2. The above set of equations reduces to the background and perturbation equations for fluid stars with isotropic pressure [46], i.e., pr=pt=pp_r=p_t=p, when σ0\sigma_0 vanishes.

In this paper, the numerical integration of Eqs. (20)–(22), (A27), and (A30)–(A32) is performed using the explicit fourth-order Runge-Kutta method. We verify that the fluid limit results are recovered when μ~\tilde{\mu} is taken to be an infinitesimally small value. Also, we compare our numerical results with Refs. [33, 46, 59] to validate our code implementation. We obtain consistent results when the same physical models are used.

Junction condition on ξ2\xi_{2}

Similar to p~\tilde{p}, the quantity ξ\xi is also discontinuous at the core-envelope interface due to the jump in σ0\sigma_{0} [see Eqs. (A28) and (A32)]. Although its value inside the fluid envelope can be found directly by setting σ0=σ2(2)=0\sigma_{0}=\sigma_{2}^{(2)}=0 in Eq. (A28), we here derive the junction condition that determines its jump for completeness.

First, we can write discontinuous σ0\sigma_{0} as

σ0=Θ(rt−r)σ0−+Θ(r−rt)σ0+,(53)\sigma_{0}=\Theta(r_{t}-r)\sigma_{0}^{-}+\Theta(r-r_{t})\sigma_{0}^{+}, \tag*{(53)}

where Θ(x)\Theta(x) is the Heaviside step function with the half-maximum convention [i.e., Θ(0)=1/2\Theta(0)=1/2], the subscript tt represents that the quantity is evaluated at the transition point, and the superscript −- (++) represents the core (envelope) side value of a quantity that is discontinuous at rtr_{t}. In our model, σ0+=0\sigma_{0}^{+}=0. However, we keep it unspecified here to make the final expression generic. The derivative in (36) is thus given by

dσ0dr=Θ(rt−r)dσ0−dr+Θ(r−rt)dσ0+dr+(σ0,t+−σ0,t−)δ(r−rt).(54)\frac{d\sigma_{0}}{dr}=\Theta(r_{t}-r)\frac{d\sigma_{0}^{-}}{dr}+\Theta(r-r_{t})\frac{d\sigma_{0}^{+}}{dr}+\left(\sigma_{0,t}^{+}-\sigma_{0,t}^{-}\right)\delta(r-r_{t}). \tag*{(54)}

Applying (54) to (40) and integrating, we obtain

ξ2,t+−ξ2,t−ξ2,t++ξ2,t−=2rt(σ0,t+−σ0,t−)(dpr−dr+dpr+dr)−1.(55)\frac{\xi_{2,t}^{+}-\xi_{2,t}^{-}}{\xi_{2,t}^{+}+\xi_{2,t}^{-}}=\frac{2}{r_{t}}\left(\sigma_{0,t}^{+}-\sigma_{0,t}^{-}\right)\left(\frac{d p_{r}^{-}}{d r}+\frac{d p_{r}^{+}}{d r}\right)^{-1}. \tag*{(55)}

In practical calculations, we compute ξ2,t+\xi_{2,t}^{+} by setting σ0=σ2(2)=0\sigma_{0}=\sigma_{2}^{(2)}=0 in (36), and the numerical results are consistent with that obtained using (55).

References

References

  1. [1]M. Alford, M. Braby, M. W. Paris, and S. Reddy, Hybrid stars that masquerade as neutron stars, Astrophys. J. 629, 969 (2005), arXiv:nucl-th/0411016.DOI
  2. [2]M. G. Alford, S. Han, and M. Prakash, Generic conditions for stable hybrid stars, Phys. Rev. D 88, 083013 (2013), arXiv:1302.4732 [astro-ph.SR].DOI
  3. [3]E. Witten, Cosmic Separation of Phases, Phys. Rev. D 30, 272 (1984).DOI
  4. [4]M. G. Alford, K. Rajagopal, and F. Wilczek, QCD at finite baryon density: Nucleon droplets and color superconductivity, Phys. Lett. B 422, 247 (1998), arXiv:hep-ph/9711395.DOI
  5. [5]M. G. Alford, K. Rajagopal, and F. Wilczek, Color flavor locking and chiral symmetry breaking in high density QCD, Nucl. Phys. B 537, 443 (1999), arXiv:hep-ph/9804403.DOI
  6. [6]M. G. Alford, J. A. Bowers, and K. Rajagopal, Crystalline color superconductivity, Phys. Rev. D 63, 074016 (2001), arXiv:hep-ph/0008208.DOI
  7. [7]K. Rajagopal and R. Sharma, The Crystallography of Three-Flavor Quark Matter, Phys. Rev. D 74, 094019 (2006), arXiv:hep-ph/0605316.DOI
  8. [8]R. Anglani, R. Casalbuoni, M. Ciminale, N. Ippolito, R. Gatto, M. Mannarelli, and M. Ruggieri, Crystalline color superconductors, Rev. Mod. Phys. 86, 509 (2014), arXiv:1302.4264 [hep-ph].DOI
  9. [9]M. G. Alford, Color superconducting quark matter, Ann. Rev. Nucl. Part. Sci. 51, 131 (2001), arXiv:hep-ph/0102047.DOI
  10. [10]M. G. Alford, A. Schmitt, K. Rajagopal, and T. Schäfer, Color superconductivity in dense quark matter, Rev. Mod. Phys. 80, 1455 (2008), arXiv:0709.4635 [hep-ph].DOI
  11. [11]G. Pagliara, Formation of quark phases in protoneutron stars: the transition from the 2SC to the normal quark phase, Phys. Rev. D 83, 125013 (2011), arXiv:1012.3046 [nucl-th].
  12. [12]M. Mannarelli, K. Rajagopal, and R. Sharma, The Rigidity of crystalline color superconducting quark matter, Phys. Rev. D 76, 074026 (2007), arXiv:hep-ph/0702021.DOI
  13. [13]M. Karlovini and L. Samuelsson, Elastic stars in general relativity. 1. Foundations and equilibrium models, Class. Quant. Grav. 20, 3613 (2003), arXiv:gr-qc/0211026.DOI
  14. [14]M. Karlovini, L. Samuelsson, and M. Zarroug, Elastic stars in general relativity. 2. Radial perturbations, Class. Quant. Grav. 21, 1559 (2004), arXiv:gr-qc/0309056.DOI
  15. [15]R. L. Bowers and E. P. T. Liang, Anisotropic Spheres in General Relativity, Astrophys. J. 188, 657 (1974).DOI
  16. [16]D. Horvat, S. Ilijic, and A. Marunovic, Radial pulsations and stability of anisotropic stars with quasi-local equation of state, Class. Quant. Grav. 28, 025009 (2011), arXiv:1010.0878 [gr-qc].DOI
  17. [17]X.-G. Huang, M. Huang, D. H. Rischke, and A. Sedrakian, Anisotropic Hydrodynamics, Bulk Viscosities and R-Modes of Strange Quark Stars with Strong Magnetic Fields, Phys. Rev. D 81, 045015 (2010), arXiv:0910.3633 [astro-ph.HE].DOI
  18. [18]E. J. Ferrer, V. de la Incera, J. P. Keith, I. Portillo, and P. L. Springsteen, Equation of State of a Dense and Magnetized Fermion System, Phys. Rev. C 82, 065802 (2010), arXiv:1009.3521 [hep-ph].DOI
  19. [19]S. Yazadjiev, Relativistic models of magnetars: Nonperturbative analytical approach, Phys. Rev. D 85, 044030 (2012), arXiv:1111.3536 [gr-qc].DOI
  20. [20]L. M. Becerra-Vergara, and F. D. Lora-Clavijo, Realistic anisotropic neutron stars: Pressure effects, Phys. Rev. D 109, 043025 (2024), arXiv:2401.10311 [astro-ph.HE].
  21. [21]R. F. Sawyer and D. J. Scalapino, Pion condensation in superdense nuclear matter, Phys. Rev. D 7, 953 (1973).
  22. [22]W. H. Dickhoff, A. Faessler, J. Meyer-Ter-Vehn, and H. Muther, Pion Condensation and Realistic Interactions, Phys. Rev. C 23, 1154 (1981).DOI
  23. [23]A. B. Migdal, E. E. Saperstein, M. A. Troitsky, and D. N. Voskresensky, Pion degrees of freedom in nuclear matter, Phys. Rept. 192, 179 (1990).DOI
  24. [24]P. H. R. S. Moraes, G. Panotopoulos, and I. Lopes, Anisotropic Dark Matter Stars, Phys. Rev. D 103, 084023 (2021), arXiv:2101.02207 [gr-qc].DOI
  25. [25]J. Bramante and N. Raj, Dark matter in compact stars, Phys. Rept. 1052, 1 (2024), arXiv:2307.14435 [hep-ph].arxiv.org/abs/2307.14435
  26. [26]S. K. Maurya, K. N. Singh, A. Aziz, S. Ray, and G. Mustafa, Compact stars with dark matter induced anisotropy in complexity-free background and effect of dark matter on gw echoes, Monthly Notices of the Royal Astronomical Society 527, 5192 (2023), https://academic.oup.com/mnras/article-pdf/527/3/5192/53936957/stad3562.pdf
  27. [27]C. R. Ghezzi, Anisotropic dark energy stars, Astrophys. Space Sci. 333, 437 (2011), arXiv:0908.0779 [gr-qc].DOI
  28. [28]K. Das and N. Ali, Anisotropic charged dark energy star, Astrophys. Space Sci. 356, 57 (2015), arXiv:1403.5219 [physics.gen-ph].DOI
  29. [29]T. Cadogan and E. Poisson, Self-gravitating anisotropic fluids. I: context and overview, Gen. Rel. Grav. 56, 118 (2024), arXiv:2406.03185 [gr-qc].arxiv.org/abs/2406.03185
  30. [30]T. Cadogan and E. Poisson, Self-gravitating anisotropic fluid. II: Newtonian theory, Gen. Rel. Grav. 56, 119 (2024), arXiv:2406.03191 [gr-qc].arxiv.org/abs/2406.03191
  31. [31]T. Cadogan and E. Poisson, Self-gravitating anisotropic fluid. III: relativistic theory, Gen. Rel. Grav. 56, 120 (2024), arXiv:2406.03196 [gr-qc].arxiv.org/abs/2406.03196
  32. [32]A. Alho, J. Natário, P. Pani, and G. Raposo, Compact elastic objects in general relativity, Phys. Rev. D 105, 044025 (2022), [Erratum: Phys.Rev.D 105, 129903 (2022)], arXiv:2107.12272 [gr-qc].DOI
  33. [33]Z. Z. Dong, S. Y. Lau, and K. Yagi, New modeling for hybrid stars with an elastic quark core, Phys. Rev. D 111, 123043 (2025), arXiv:2412.16636 [gr-qc].DOI
  34. [34]A. Alho, J. Natário, P. Pani, and G. Raposo, Compactness bounds in general relativity, Phys. Rev. D 106, L041502 (2022), arXiv:2202.00043 [gr-qc].DOI
  35. [35]J. B. Hartle, Slowly rotating relativistic stars. 1. Equations of structure, Astrophys. J. 150, 1005 (1967).
  36. [36]J. B. Hartle and K. S. Thorne, Slowly Rotating Relativistic Stars. II. Models for Neutron Stars and Supermassive Stars, Astrophys. J. 153, 807 (1968).DOI
  37. [37]D. G. Ravenhall and C. J. Pethick, Neutron Star Moments of Inertia, Astrophys. J. 424, 846 (1994).DOI
  38. [38]M. Bejger and P. Haensel, Moments of inertia for neutron and strange stars: Limits derived for the Crab pulsar, Astron. Astrophys. 396, 917 (2002), arXiv:astro-ph/0209151.DOI
  39. [39]J. M. Lattimer and B. F. Schutz, Constraining the equation of state with moment of inertia measurements, Astrophys. J. 629, 979 (2005), arXiv:astro-ph/0411470.DOI
  40. [40]M. Urbanec, J. C. Miller, and Z. Stuchlík, Quadrupole moments of rotating neutron stars and strange stars, Monthly Notices of the Royal Astronomical Society 433, 1903 (2013), https://academic.oup.com/mnras/article-pdf/433/3/1903/4051531/stt858.pdf.DOI
  41. [41]M. Bauböck, E. Berti, D. Psaltis, and F. Özel, Relations Between Neutron-Star Parameters in the Hartle-Thorne Approximation, Astrophys. J. 777, 68 (2013), arXiv:1306.0569 [astro-ph.HE].DOI
  42. [42]C. Breu and L. Rezzolla, Maximum mass, moment of inertia and compactness of relativistic stars, Mon. Not. Roy. Astron. Soc. 459, 646 (2016), arXiv:1601.06083 [gr-qc].DOI
  43. [43]N. Jiang and K. Yagi, Analytic I-Love-C relations for realistic neutron stars, Phys. Rev. D 101, 124006 (2020), arXiv:2003.10498 [gr-qc].DOI
  44. [44]K. Yagi and N. Yunes, Approximate Universal Relations for Neutron Stars and Quark Stars, Phys. Rept. 681, 1 (2017), arXiv:1608.02582 [gr-qc].DOI
  45. [45]K. Yagi and N. Yunes, I-Love-Q, Science 341, 365 (2013), arXiv:1302.4499 [gr-qc].DOI
  46. [46]K. Yagi and N. Yunes, I-Love-Q Relations in Neutron Stars and their Applications to Astrophysics, Gravitational Waves and Fundamental Physics, Phys. Rev. D 88, 023009 (2013), arXiv:1303.1528 [gr-qc].DOI
  47. [47]D. D. Doneva, S. S. Yazadjiev, N. Stergioulas, and K. D. Kokkotas, Breakdown of I-Love-Q universality in rapidly rotating relativistic stars, Astrophys. J. Lett. 781, L6 (2013), arXiv:1310.7436 [gr-qc].DOI
  48. [48]G. Pappas and T. A. Apostolatos, Effectively universal behavior of rotating neutron stars in general relativity makes them even simpler than their Newtonian counterparts, Phys. Rev. Lett. 112, 121101 (2014), arXiv:1311.5508 [gr-qc].
  49. [49]S. Chakrabarti, T. Delsate, N. Gürlebeck, and J. Steinhoff, I-Q relation for rapidly rotating neutron stars, Phys. Rev. Lett. 112, 201102 (2014), arXiv:1311.6509 [gr-qc].DOI
  50. [50]K. Yagi, K. Kyutoku, G. Pappas, N. Yunes, and T. A. Apostolatos, Effective No-Hair Relations for Neutron Stars and Quark Stars: Relativistic Results, Phys. Rev. D 89, 124013 (2014), arXiv:1403.6243 [gr-qc].DOI
  51. [51]V. Paschalidis, K. Yagi, D. Alvarez-Castillo, D. B. Blaschke, and A. Sedrakian, Implications from GW170817 and I-Love-Q relations for relativistic hybrid stars, Phys. Rev. D 97, 084038 (2018), arXiv:1712.00451 [astro-ph.HE].DOI
  52. [52]N. K. Largani, T. Fischer, A. Sedrakian, M. Cierniak, D. E. Alvarez-Castillo, and D. B. Blaschke, Universal relations for rapidly rotating cold and hot hybrid stars, Mon. Not. Roy. Astron. Soc. 515, 3539 (2022), arXiv:2112.10439 [astro-ph.HE].DOI
  53. [53]G. Papigkiotis and G. Pappas, Universal relations for rapidly rotating neutron stars using supervised machine-learning techniques, Phys. Rev. D 107, 103050 (2023), arXiv:2303.04273 [astro-ph.HE].DOI
  54. [54]C. J. Krüger and S. H. Völkel, Rapidly rotating neutron stars: Universal relations and EOS inference, Phys. Rev. D 108, 124056 (2023), arXiv:2309.05643 [gr-qc].DOI
  55. [55]S. Y. Lau, P. T. Leung, and L. M. Lin, Tidal deformations of compact stars with crystalline quark matter, Phys. Rev. D 95, 130302 (2017), arXiv:1705.01710 [astro-ph.HE].DOI
  56. [56]S. Y. Lau, P. T. Leung, and L. M. Lin, Two-layer compact stars with crystalline quark matter: Screening effect on the tidal deformability, Phys. Rev. D 99, 023018 (2019), arXiv:1808.08107 [astro-ph.HE].DOI
  57. [57]F. Gittins, N. Andersson, and J. P. Pereira, Tidal deformations of neutron stars with elastic crusts, Phys. Rev. D 101, 103025 (2020), arXiv:2003.05449 [astro-ph.HE].DOI
  58. [58]Z. Z. Dong, J. C. Faggert, S. Y. Lau, and K. Yagi, Love-C relations for elastic hybrid stars, Gen. Rel. Grav. 56, 113 (2024), arXiv:2405.20228 [gr-qc].DOI
  59. [59]K. Yagi and N. Yunes, I-Love-Q anisotropically: Universal relations for compact stars with scalar pressure anisotropy, Phys. Rev. D 91, 123008 (2015), arXiv:1503.02726 [gr-qc].DOI
  60. [60]H. C. Das, I-Love-C relation for an anisotropic neutron star, Phys. Rev. D 106, 103518 (2022), arXiv:2208.12566 [gr-qc].DOI
  61. [61]S. R. Mohanty, S. Ghosh, P. Routaray, H. C. Das, and B. Kumar, The impact of anisotropy on neutron star properties: insights from I–F–C universal relations, JCAP 03 054 arXiv:2305.15724 [nucl-th].
  62. [62]J. M. Z. Pretel and C. Zhang, Universal relations for anisotropic interacting quark stars, JCAP 10, 032 (2021), arXiv:2401.12519 [nucl-th].
  63. [63]A. Akmal, V. R. Pandharipande, and D. G. Ravenhall, The Equation of state of nucleon matter and neutron star structure, Phys. Rev. C 58, 1804 (1998), arXiv:nucl-th/9804027.DOI
  64. [64]P. Haensel, A. Y. Potekhin, and D. G. Yakovlev, Neutron stars 1: Equation of state and structure, Vol. 326 (Springer, New York, USA, 2007).
  65. [65]P. J. Davis, H. D. Thi, A. F. Fantina, F. Gulminelli, M. Oertel, and L. Suleiman, Inference of neutron-star properties with unified crust-core equations of state for parameter estimation, Astron. Astrophys. 687, A44 (2024), arXiv:2406.14906 [astro-ph.HE].DOI
  66. [66]P. J. Davis, H. Dinh Thi, A. F. Fantina, F. Gulminelli, M. Oertel, and L. Suleiman, Crust (unified) tool for equation-of-state reconstruction (CUTER) v2, Eur. Phys. J. A 61, 120 (2025), arXiv:2506.08658 [astro-ph.HE].DOI
  67. [67]F. Douchin and P. Haensel, A unified equation of state of dense matter and neutron star structure, Astron. Astrophys. 380, 151 (2001), arXiv:astro-ph/0111092.
  68. [68]I. Bombaci and D. Logoteta, Equation of state of dense nuclear matter and neutron star structure from nuclear chiral interactions, Astron. Astrophys. 609, A128 (2018), arXiv:1805.11846 [astro-ph.HE].DOI
  69. [69]H. Shen, H. Toki, K. Oyamatsu, and K. Sumiyoshi, Relativistic equation of state of nuclear matter for supernova explosion, Prog. Theor. Phys. 100, 1013 (1998), arXiv:nucl-th/9806095.DOI
  70. [70]H. Shen, H. Toki, K. Oyamatsu, and K. Sumiyoshi, Relativistic equation of state of nuclear matter for supernova and neutron star, Nucl. Phys. A 637, 435 (1998), arXiv:nucl-th/9805035.DOI
  71. [71]Y. Sugahara and H. Toki, Relativistic mean field theory for unstable nuclei with nonlinear sigma and omega terms, Nucl. Phys. A 579, 557 (1994).
  72. [72]S. Typel, M. Oertel, and T. Klähn, CompOSE Comp-Star online supernova equations of state harmonising the concert of nuclear physics and astrophysics compose.obspm.fr, Phys. Part. Nucl. 46, 633 (2015), arXiv:1307.5715 [astro-ph.SR].
  73. [73]M. Oertel, M. Hempel, T. Klähn, and S. Typel, Equations of state for supernovae and compact stars, Rev. Mod. Phys. 89, 015007 (2017), arXiv:1610.03361 [astro-ph.HE].DOI
  74. [74]S. Typel et al. (CompOSE Core Team), CompOSE Reference Manual, Eur. Phys. J. A 58, 221 (2022), arXiv:2203.03209 [astro-ph.HE].arxiv.org/abs/2203.03209
  75. [75]J. C. Faggert, Probing Crystalline Color Superconducting Phase of Quark Matter through Universal Relations for Hybrid Stars, Virginia U. 10.18130/njvn-1964 (2023).DOI
  76. [76]B. P. Abbott et al. (LIGO Scientific, Virgo), GW170817: Measurements of neutron star radii and equation of state, Phys. Rev. Lett. 121, 161101 (2018), arXiv:1805.11581 [gr-qc].
  77. [77]M. C. Miller et al., PSR J0030+0451 Mass and Radius from NICER Data and Implications for the Properties of Neutron Star Matter, Astrophys. J. Lett. 887, L24 (2019), arXiv:1912.05705 [astro-ph.HE].
  78. [78]T. Salmi et al., The Radius of the High-mass Pulsar PSR J0740+6620 with 3.6 yr of NICER Data, Astrophys. J. 974, 294 (2024), arXiv:2406.14466 [astro-ph.HE].DOI
  79. [79]V. Doroshenko, V. Suleimanov, G. Pühlhofer, and A. Santangelo, A strangely light neutron star within a supernova remnant, Nature Astron. 6, 1444 (2022).DOI
  80. [80]I. A. Rather, G. Panotopoulos, and I. Lopes, Quark models and radial oscillations: decoding the HESS J1731-347 compact object’s equation of state, Eur. Phys. J. C 83, 1065 (2023), arXiv:2307.03703 [astro-ph.HE].DOI
  81. [81]F. Di Clemente, A. Drago, and G. Pagliara, Is the Compact Object Associated with HESS J1731-347 a Strange Quark Star? A Possible Astrophysical Scenario for Its Formation, Astrophys. J. 967, 159 (2024), arXiv:2211.07485 [astro-ph.HE].DOI
  82. [82]Z. F. Seidov, The Stability of a Star with a Phase Change in General Relativity Theory, Soviet Astronomy 15, 347 (1971).
  83. [83]S. Vinciguerra et al., An Updated Mass–Radius Analysis of the 2017–2018 NICER Data Set of PSR J0030+0451, Astrophys. J. 961, 62 (2024), arXiv:2308.09469 [astro-ph.HE].DOI
  84. [84]T. K. Chan, A. P. O. Chan, and P. T. Leung, I-Love relations for incompressible stars and realistic stars, Phys. Rev. D 91, 044017 (2015), arXiv:1411.7141 [astro-ph.SR].DOI
  85. [85]T. K. Chan, A. P. O. Chan, and P. T. Leung, Universality and stationarity of the I-Love relation for self-bound stars, Phys. Rev. D 93, 024033 (2016), arXiv:1511.08566 [gr-qc].DOI
  86. [86]M. Karlovini and L. Samuelsson, Elastic stars in general relativity: Iv. axial perturbations, Class. Quantum Grav. 24, 3171–3189 (2007).DOI
  87. [87]B. Carter, Elastic perturbation theory in general relativity and a variation principle for a rotating solid star, Commun. Math. Phys 30, 261–286 (1973).DOI
  88. [88]K. Yang, L. C. Stein, G. Pappas, N. Yunes, and T. A. Apostolatos, Why I-Love-Q: Explaining why universality emerges in compact objects, Phys. Rev. D 90, 063010 (2014), arXiv:1406.7587 [gr-qc].
  89. [89]T. K. Chan, Y. H. Sham, P. T. Leung, and L. M. Lin, Multipolar universal relations between f-mode frequency and tidal deformability of compact stars, Phys. Rev. D 90, 124023 (2014), arXiv:1408.3789 [gr-qc].DOI
  90. [90]Y. H. Sham, T. K. Chan, L. M. Lin, and P. T. Leung, Unveiling the universality of I-Love-Q relations, Astrophys. J. 798, 121 (2015), arXiv:1410.8271 [gr-qc].DOI
  91. [91]K. Kyutoku, Assessment of universal relations among second-order moments of relativistic stars via reformulated perturbation equations, Phys. Rev. D 112, 024059 (2025), arXiv:2503.00098 [gr-qc].DOI
  92. [92]T. Katagiri, G. R. Mukkamala, and K. Yagi, Theoretical modeling of approximate universality of tidally deformed neutron stars, Phys. Rev. D 112, 023030 (2025), arXiv:2505.05429 [gr-qc].arxiv.org/abs/2505.05429

Paper details

vlnc:W_rg738djx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents