betaFeedback

WorksPhysics and Astronomy

Automate the geometric SMEFT at dimension eight

Abstract

We present the first complete dimension-eight implementation of the geometric Standard Model Effective Field Theory (geoSMEFT) as UFO models for event generators such as MadGraph. The models contain all 674 baryon-number-conserving operators, with minimal flavour violation for the fermionic operators, and are also provided in the Murphy basis. We include dimension-six contributions and electroweak input-parameter corrections consistently through order 1/Λ41/Λ^4, and provide dimension-eight squared contributions as a diagnostic of EFT truncation. We validate the implementation against independent calculations and Ward identities. To make these models practical for collider studies, we develop a standalone tool that identifies all operators contributing to a given process at tree level, including those entering through input-parameter shifts. It reports their expected energy scaling and generates a restriction card to reduce the computational cost of event generation. The same geometric construction allows us to calculate two- and three-point functions beyond dimension eight, to arbitrary order in 1/Λ21/Λ^2. The models and the tool are publicly available.

Prepared for submission to JHEP

Introduction

The Standard Model Effective Field Theory (SMEFT) extends the Standard Model (SM) by higher-dimensional operators consistent with its gauge symmetries [1, 2],

LSMEFT=LSM+∑d>4∑jCj(d)Λd−4Qj(d).(1)\mathcal{L}_{\mathrm{SMEFT}} = \mathcal{L}_{\mathrm{SM}} + \sum_{d>4} \sum_j \frac{C_j^{(d)}}{\Lambda^{d-4}} Q_j^{(d)}. \tag*{(1)}

Here Cj(d)C_j^{(d)} denotes the Wilson coefficient of the operator Qj(d)Q_j^{(d)}, and Λ\Lambda is the scale of new physics. At dimension six, established tools connect the Warsaw basis [3] to event generators through FeynRules [4, 5] and the UFO format [6, 7, 8, 9, 10, 11]. At order 1/Λ41/\Lambda^4, the squared dimension-six contributions enter alongside the interference of dimension-eight operators with the SM. Dimension-eight operators also provide independent constraints on new physics, including positivity bounds derived from fundamental properties of scattering amplitudes [12, 13, 14, 15, 16, 17]. However, their large number has limited most phenomenological studies to selected operators, including studies of Higgs physics [18, 19, 20, 21, 22, 23, 24, 25], electroweak precision observables [26, 27], Drell-Yan production [28, 29, 30, 31], diboson production [32, 33], and quartic gauge interactions [34].

The complete dimension-eight operator basis is already known. Li et al. constructed a basis from the correspondence between operators and on-shell amplitudes [35], while Murphy independently presented a basis in a notation similar to the Warsaw basis [36]. Their operator counts agree with the Hilbert series calculations of Refs. [37, 38], which extend the earlier dimension-eight analysis of Ref. [39]. Automated methods for constructing operator bases, matching, and renormalisation have also been developed [40, 41, 42, 43, 44, 45, 46, 47, 48]. Several event-generator implementations are available, including the bosonic dimension-eight sector in SmeftFR [49, 50], models for anomalous quartic gauge couplings [51, 52, 53], and implementations for specific processes [54, 55]. More recently, a complete dimension-eight UFO model in the {MW,MZ,GF}\{M_W, M_Z, G_F\} input scheme was presented using Matchete [48, 56]. The challenge is therefore not simply to implement the operator basis, but to make the complete theory practical for collider calculations.

In this work, we provide the first complete dimension-eight implementation compatible with the geometric SMEFT (geoSMEFT) [57]. Our UFO models contain all 674 baryon-number-conserving operators, with the flavour structure of the fermionic operators given by minimal flavour violation (MFV). The default basis differs from our corrected implementation of the Murphy basis only in the ψ2H2D3\psi^2 H^2 D^3 class, which we replace with operators that do not contribute to vertices with fewer than four fields [22, 31]. This preserves the geoSMEFT description of the two- and three-point functions. We also provide models in the Murphy basis, including the corrections discussed in § 3. Both the {MW,MZ,GF}\{M_W, M_Z, G_F\} and {α,MZ,GF}\{\alpha, M_Z, G_F\} input schemes are implemented [58, 59]. The combined models include the dimension-six sector of SMEFTsim [8, 9] in its U35 setup, which keeps the leading flavour structure of each operator in powers of the Yukawa couplings and allows complex Wilson coefficients. The electroweak input-parameter relations are derived through order 1/Λ41/\Lambda^4, including terms quadratic in the dimension-six coefficients [26, 60].

Using the full basis in an event generator is computationally expensive, and identifying which operators contribute to a particular process is not straightforward. To address this, we develop a standalone program, the selector, which identifies all operators that can contribute to a given process at tree level. It includes operators that enter directly through interaction vertices and those that contribute indirectly through shifts in the electroweak input parameters. The selector also reports the expected energy dependence of each operator [61], allowing users to identify potentially energy-enhanced contributions. It then automatically generates a restriction card for MadGraph5_aMC@NLO, removing irrelevant operators during model import and reducing the work needed to prepare the model.

The models allow calculations consistently through order 1/Λ41/\Lambda^{4}, including dimension-six interference and squared contributions together with dimension-eight interference. The dimension-eight squared terms can also be calculated, providing a useful diagnostic of the EFT truncation, although they do not constitute a complete prediction at order 1/Λ81/\Lambda^{8}. We demonstrate these capabilities in four LHC studies, examining the energy dependence of different operator classes, contributions that do not interfere with the SM at tree level, and the relative size of dimension-eight interference and squared terms.

The geoSMEFT formulation also allows us to extend the implementation beyond dimension eight. We automate the operators contributing to two- and three-point functions at arbitrary order, with the corresponding input-parameter relations [57, 60]. A model expanded through dimension 2N+42N+4 therefore includes these functions through order 1/Λ2N1/\Lambda^{2N}, allowing systematic higher-order predictions for electroweak and Higgs pole observables at tree level.

To construct the models, we write down the operators and generate their FeynRules expressions automatically, checking their gauge structure, Hermiticity, and CP properties. We validate the resulting models against independent implementations and through Ward identities.

The paper is organised as follows. § 2 introduces the geoSMEFT and our choice of basis, while § 3 describes the operator conventions and classifications. § 4 presents the model construction, input schemes, and selector, and § 5 describes the energy counting. § 6 collects the validation tests, and § 7 applies the models and the counting to four LHC studies. § 7.2 and § 7.3 examine contributions that do not interfere with the SM at tree level and the size of dimension-eight squared terms relative to the interference. The appendices provide further conventions, validation details, the energy counting of four representative processes, and the complete results for each process (Sections A to D).

The geometric SMEFT

The geometric SMEFT (geoSMEFT) provides a systematic description of two- and three-point interactions to arbitrary order in the SMEFT expansion [57]. We first review its construction, then explain how it guides our choice of dimension-eight basis.

The geometric SMEFT starts from the observation that the four real components ϕI\phi^I, I=1,…,4I = 1,\ldots,4, of the Higgs doublet can be treated as coordinates on a field space [62, 63]. A field redefinition ϕ→ϕ′(ϕ)\phi\to\phi'(\phi) is then a change of coordinates, under which physical observables remain invariant. The Higgs kinetic term,

12hIJ(ϕ)(Dμϕ)I(Dμϕ)J,(2)\frac{1}{2}h_{IJ}(\phi)(D_\mu\phi)^I(D^\mu\phi)^J, \tag*{(2)}

defines a metric hIJh_{IJ} on this space. In the SM the metric is flat, while higher-dimensional operators introduce curvature. The geometry therefore provides a description of the Higgs interactions that does not depend on the choice of field coordinates.

The geoSMEFT extends this description to gauge bosons and fermions by organizing the Lagrangian in terms of field-dependent functions [57, 64],

L⊃12hIJ(ϕ)(Dμϕ)I(Dμϕ)J−14gAB(ϕ)WμνAWB,μν−V(ϕ)+kIJA(ϕ)(Dμϕ)I(Dνϕ)JWμνA+fABC(ϕ)WνA,μWρB,νWμC,ρ+[Y(ϕ)ψˉ1ψ2+dA(ϕ)ψˉ1σμνψ2WμνA+h.c.]+LI,A(ϕ)(Dμϕ)Iψˉ1γμσAψ2+⋯ .(3)\begin{aligned} \mathcal{L} \supset{}& \frac{1}{2}h_{IJ}(\phi)(D_\mu\phi)^I(D^\mu\phi)^J-\frac{1}{4}g_{AB}(\phi)\mathcal{W}^A_{\mu\nu}\mathcal{W}^{B,\mu\nu}-V(\phi) \\ &+k_{IJ}^A(\phi)(D^\mu\phi)^I(D^\nu\phi)^J\mathcal{W}^A_{\mu\nu}+f_{ABC}(\phi)\mathcal{W}^{A,\mu}_{\nu}\mathcal{W}^{B,\nu}_{\rho}\mathcal{W}^{C,\rho}_{\mu} \\ &+\left[Y(\phi)\bar{\psi}_1\psi_2+d_A(\phi)\bar{\psi}_1\sigma^{\mu\nu}\psi_2\mathcal{W}^A_{\mu\nu}+\mathrm{h.c.}\right]+L_{I,A}(\phi)(D^\mu\phi)^I\bar{\psi}_1\gamma_\mu\sigma^A\psi_2+\cdots. \tag*{(3)} \end{aligned}

Here WA={W1,W2,W3,B}\mathcal{W}^A=\{W^1,W^2,W^3,B\}, σA={σI,1}\sigma_A=\{\sigma^I,1\}, and flavour indices are suppressed. The omitted terms include gluonic interactions and CP-odd counterparts. The field-dependent functions, called connections, organize towers of higher-dimensional operators through their expansion in H†H/Λ2H^\dagger H/\Lambda^2. For example, the Higgs metric hIJh_{IJ} receives contributions from QH□Q_{H\Box} and QHDQ_{HD} at dimension six, and from QH6(1)Q_{H^6}^{(1)} and QH6(2)Q_{H^6}^{(2)} at dimension eight.

The advantage of this organization becomes clear when choosing an operator basis. Integration by parts and the equations of motion allow operators to be rearranged so that all contributions to vertices with at most three fields are contained in the connections [31, 57, 65]. The two- and three-point functions are then determined entirely by these functions and their derivatives evaluated at the vacuum. They describe the masses, field normalizations, and interactions of the SM particles. The number of independent operator structures contributing to each connection reaches a fixed value at finite mass dimension. The connection kIJAk^A_{IJ} acquires one additional CP-even structure at dimension ten [57], and the same structure with the dual field strength gives its CP-odd counterpart. The connections can therefore be constructed to arbitrary order in v/Λv/\Lambda [57, 60], even though the total number of SMEFT operators continues to grow. This simplification does not extend to vertices with four or more fields. The Warsaw basis already has the required structure at dimension six [3, 22, 31].

The geoSMEFT has been used to derive background-field gauge fixing, Ward identities, and Feynman rules [64, 66, 67, 68], and to calculate higher-order corrections to electroweak and Higgs observables [19, 20, 21, 22, 23, 26, 31, 33]. It also provides a systematic treatment of input parameters, fermion masses, and renormalisation [60, 69, 70, 71, 72, 73], while the field-space geometry clarifies the relation between SMEFT and HEFT [63, 74, 75, 76, 77, 78, 79].

The operator basis

We construct our dimension-eight models from the Murphy basis [36]. The following subsections establish the conventions and operator counting, describe the basis change required by the geoSMEFT, and present corrections to the published expressions and the CP assignments.

Conventions and counting

We follow the conventions of the Murphy basis [36], with the covariant derivative and dual field strengths defined as

Dμ=∂μ+ig1yBμ+ig2tIWμI+ig3TAGμA,X~μν=12ϵμνρσXρσ,H~j=ϵjkH†k,(4)\begin{aligned} D_\mu&= \partial_\mu+ i g_1 y B_\mu+ i g_2 t^I W_\mu^I + i g_3 T^A G_\mu^A, \\ \widetilde{X}_{\mu\nu} &= \frac{1}{2}\epsilon_{\mu\nu\rho\sigma}X^{\rho\sigma}, \qquad\widetilde{H}_j = \epsilon_{jk}H^{\dagger k}, \tag*{(4)} \end{aligned}

where tI=τI/2t^I = \tau^I/2 and ϵ0123=+1\epsilon_{0123} = +1. We also use iH†Dμ↔H=iH†(DμH)−i(DμH†)HiH^\dagger\overleftrightarrow{D_\mu}H = iH^\dagger(D_\mu H) - i(D_\mu H^\dagger)H. Further conventions are collected in Table 5. We group operators into 21 classes according to their field and derivative content, following the Murphy basis.

objectMurphy basisour FeynRules form
SU(2)wSU(2)_w, SU(3)cSU(3)_c generatorstI=τI/2t^I = \tau^I/2, TA=λA/2T^A = \lambda^A/2τI→2Ta\tau^I \to2\mathrm{Ta}, T\mathrm{T}
dABCd^{ABC}, ϵjk\epsilon_{jk}{TA,TB}\{T^A,T^B\} symbol, ϵ12=+1\epsilon_{12}=+1dSUN, Eps
H~\widetilde{H}H~j=ϵjkH†k\widetilde{H}_j = \epsilon_{jk}H^{\dagger k}Eps Phibar
Levi-Civita, dual tensorϵ0123=+1\epsilon_{0123}=+1, X~=12ϵX\widetilde{X}=\frac{1}{2}\epsilon XEps with verified sign
σμν\sigma^{\mu\nu}i2[γμ,γν]\frac{i}{2}[\gamma^\mu,\gamma^\nu]antisymmetrised Ga product
Hermitian derivativeiH†D↔μHiH^\dagger\overleftrightarrow{D}_\mu Hexpanded two-term form
Wilson coefficientsCQ/Λ4C Q/\Lambda^4, [C]=0[C]=0c/Λ4c/\Lambda^4, Λ\Lambda external

Table 5. Sign and normalization conventions used in the operator implementation. The accompanying documentation gives the full dictionary and the evidence supporting each choice.

The Murphy basis contains 674 baryon-number-conserving operator structures, of which 438 have real coefficients and 236 have complex coefficients. Counting the real and imaginary parts of complex coefficients separately gives, in the one-generation limit,

Nterm=438+2×236=910=895+15.(5)N_{\mathrm{term}} = 438 + 2 \times236 = 910 = 895 + 15. \tag*{(5)}

Of these 910 terms, 15 vanish or become redundant for one generation, leaving 895 independent terms, in agreement with Hilbert series counting [37]. Including the 98 independent baryon-number-violating terms gives the familiar total of 993. These counts refer to the operator basis, not the additional flavour structures introduced by MFV. Table 1 summarizes the counting for all 21 operator classes.

ClassΔB=0\Delta B = 0ΔB≠0\Delta B \ne0RealComplexComponentsOddRe odd
1X4X^443043043170
2H8H^81010100
3H6D2H^6D^22020200
4H4D4H^4D^43030300
5X3H2X^3H^26060630
6X2H4X^2H^41001001050
7X2H2D2X^2H^2D^21801801870
8XH4D2XH^4D^26060630
9ψ2X2H\psi^2X^2H48004896025
10ψ2XH3\psi^2XH^31100112200
11ψ2H2D3\psi^2H^2D^31501411600
12ψ2H5\psi^2H^53003600
13ψ2H4D\psi^2H^4D1201111320
14ψ2X2D\psi^2X^2D57057057170
15ψ2XH2D\psi^2XH^2D86080692403
16ψ2XHD2\psi^2XHD^22400244800
17ψ2H3D2\psi^2H^3D^21800183609
18ψ4H2\psi^4H^2551034319620
19ψ4X\psi^4X1412811455224577
20ψ4HD\psi^4HD681608416800
21ψ4D2\psi^4D^247639146700
Total67460438296103015344

Table 1. Dimension-eight operators organized into the 21 classes of the Murphy basis. The real and complex columns distinguish the coefficient types, while “Components” counts a complex coefficient twice. The coefficient-counting columns include both baryon-number-conserving and baryon-number-violating operators. The CP columns count operators with CP-odd real coefficients (“Odd”) and complex coefficients whose real parts are CP odd (“Re odd”). These counts refer to the operator basis before introducing the MFV flavour structures.

We implement the dimension-eight basis assuming minimal flavour violation (MFV), with U(3)5U(3)^5 flavour symmetry broken only by the SM Yukawa matrices. We retain independent flavour structures at leading order and with two additional Yukawa matrices, including independent four-fermion contractions. For four-fermion operators, we also retain structures with four additional quark Yukawa matrices that remain independent when only the top and bottom Yukawa couplings are nonzero. The leading structure keeps the original operator coefficient, while additional flavour structures have independent coefficients. Complex coefficients are retained. Of the 585 baryon-number-conserving fermionic operators, 584 have a nonzero structure within this expansion. Together, these fermionic operators give 2247 flavour structures and 3315 real parameters.

Choice of dimension-eight basis

To preserve the geoSMEFT description of two- and three-point functions, we modify one class of the Murphy basis, ψ2H2D3\psi^2 H^2 D^3. The fifteen operators in this class can generate momentum-dependent three-point interactions that are not contained in the geoSMEFT connections [22,

[31]. For example,

Qℓ2H2D3(1)=i(lˉpγμDνlr)(D(μDν)H†H).(6)Q_{\ell^2H^2D^3}^{(1)} = i(\bar{l}_p\gamma^\mu D^\nu l_r)(D_{(\mu}D_{\nu)}H^\dagger H). \tag*{(6)}

Replacing the undifferentiated Higgs field by its vacuum expectation value produces a vertex involving two fermions and a gauge or Higgs boson. Such contributions are physically equivalent to operators with more fields through integration by parts and the equations of motion, but they prevent the geoSMEFT expressions for the three-point interactions from being applied directly.

We therefore replace these fifteen operators with a set in which every Higgs field carries a derivative, following Refs. [22, 31] for the fourteen operators whose current contains a single fermion type. These operators have no vertices with fewer than four fields. For each fermion current ψ=l,e,q,u,d\psi=l,e,q,u,d, we define

Qψ2H2D3(g1)=i(ψˉpγμψr)[(DνH)†D(μDν)H−(D(μDν)H)†DνH],Qψ2H2D3(g2)=(ψˉpγμD↔νψr)[(DμH)†DνH+(DνH)†DμH],(7)\begin{aligned} Q_{\psi^2H^2D^3}^{(g1)} &= i(\bar{\psi}_p\gamma^\mu\psi_r)\left[(D^\nu H)^\dagger D_{(\mu}D_{\nu)}H-(D_{(\mu}D_{\nu)}H)^\dagger D^\nu H\right],\\ Q_{\psi^2H^2D^3}^{(g2)} &= (\bar{\psi}_p\gamma^\mu\overleftrightarrow{D}_\nu\psi_r)\left[(D_\mu H)^\dagger D_\nu H+(D_\nu H)^\dagger D_\mu H\right], \tag*{(7)} \end{aligned}

where D(μDν)=(DμDν+DνDμ)/2D_{(\mu}D_{\nu)}=(D_\mu D_\nu+D_\nu D_\mu)/2. The corresponding triplet operators for ll and qq contain a τI\tau^I in each bilinear. The remaining operator is

QudH2D3(g)=i(uˉpγμdr)[(DνH~)†D(μDν)H].(8)Q_{udH^2D^3}^{(g)}=i(\bar{u}_p\gamma^\mu d_r)\left[(D^\nu\widetilde{H})^\dagger D_{(\mu}D_{\nu)}H\right]. \tag*{(8)}

It contributes (CQudH2D3(g)+h.c.)/Λ4(CQ_{udH^2D^3}^{(g)}+\mathrm{h.c.})/\Lambda^4 to the Lagrangian, with CC complex. The fourteen operators with real coefficients are Hermitian as written and CP even. The real part of the coefficient of QudH2D3(g)Q_{udH^2D^3}^{(g)} also multiplies the CP-even combination.

The two bases are related by integration by parts and the equations of motion. We check that they span the same space of contact amplitudes involving two fermions and two Higgs bosons, reproducing the Hilbert series counting for one, two and three generations [37]. However, the full change of basis also shifts coefficients of operators with more fields and, through the Higgs equations of motion, dimension-six coefficients at order mH2/Λ4m_H^2/\Lambda^4. A direct translation of the fifteen coefficients is therefore insufficient to specify an equivalent point in the full theory. We consequently also provide models in the original Murphy basis.

Hermiticity and corrections to the Murphy basis

We modify 84 operator expressions in the published Murphy basis [36]. Of these, 68 are anti-Hermitian as written, 14 are implemented through their Hermitian parts in the Murphy-basis models, and two vanish identically. We discuss these corrections below.

Of the 68 anti-Hermitian operators, 62 belong to the classes ψ2X2D\psi^2X^2D and ψ2XH2D\psi^2XH^2D. These contain D↔\overleftrightarrow{D} without the factor of ii required for Hermiticity. The remaining six belong to XH4D2XH^4D^2, where the contraction of DμH†DνHD^\mu H^\dagger D^\nu H, with or without τI\tau^I, with an antisymmetric field strength is anti-Hermitian. In each case, inserting a factor of ii makes the operator Hermitian. The missing factors in the ψ2XH2D\psi^2XH^2D class were also noted in Ref. [47].

The other 14 operators belong to ψ2H2D3\psi^2H^2D^3. Their Hermitian conjugates do not coincide with the printed expressions, and inserting a factor of ii does not make them Hermitian. In models using the original Murphy basis, we therefore implement these operators as

12C(Q+Q†),(9)\frac{1}{2}C(Q+Q^\dagger), \tag*{(9)}

with CC real. In our default basis, these operators are replaced by the Hermitian operators introduced in the previous subsection.

Finally, as also noted in Ref. [47], the operators QudWH2(1,2)Q_{udWH^2}^{(1,2)} vanish as printed in the Murphy basis. Their Higgs current H~†D↔μIH\widetilde{H}^{\dagger}\overleftrightarrow{D}^{I}_{\mu}H vanishes because it contracts two identical doublets with the symmetric matrix ϵτI\epsilon\tau^{I}. However, the Hilbert series predicts two independent operators with this field content [37]. We therefore use

QudWH2(1)=(u‾pγνdr)Dμ(H~†τIH)WμνI,QudWH2(2)=(u‾pγνdr)Dμ(H~†τIH)W~μνI,(10)Q_{udWH^2}^{(1)} = \left(\overline{u}_{p}\gamma^\nu d_{r}\right)D^\mu\left(\widetilde{H}^{\dagger}\tau^{I}H\right)W^{I}_{\mu\nu}, \\ Q_{udWH^2}^{(2)} = \left(\overline{u}_{p}\gamma^\nu d_{r}\right)D^\mu\left(\widetilde{H}^{\dagger}\tau^{I}H\right)\widetilde{W}^{I}_{\mu\nu}, \tag*{(10)}

each supplemented by its Hermitian conjugate. Unlike the printed expressions, these operators are nonzero and independent modulo integration by parts and the equations of motion. We retain the original operator labels. In addition to these changes, we correct several typographical errors in the published operator expressions, summarized in Table 2.

Operator(s)Correction to the published expression
Class 13: ψ2H4D\psi^2H^4DRestore the barred fermion in each bilinear.
Qℓeq2HD(6)Q_{\ell eq2HD}^{(6)}Replace γν\gamma^\nu with γμ\gamma^\mu to match the derivative index.
Qℓqd2H2Q_{\ell qd^2H^2}Restore the charge-conjugation matrix in the (lq)(lq) bilinear.
Qeq2dH2Q_{e q2dH^2}Restore the charge-conjugation matrix in the (ed)(ed) bilinear.
Qq2H2D3(4)Q_{q^2H^2D^3}^{(4)}Correct the printed label from D2D^2 to D3D^3.
Qℓq2uHD(1,2,3)Q_{\ell q^2uHD}^{(1,2,3)}Replace ϵjnHn†\epsilon_{jn}H^{n\dagger} with the appropriate H~\widetilde{H} contraction.

Table 2. Additional corrections to the operator expressions in the Murphy basis [36]. The Hermiticity corrections and the two vanishing operators are discussed in the text.

CP parity

We determine the CP parity of each dimension-eight operator from the transformation of its fields, using the rules in Section A.2. Under CP, an operator transforms as Q→ηQ†Q \to\eta Q^{\dagger}, where η=±1\eta= \pm1. For a complex coefficient, the real and imaginary parts multiply the Hermitian combinations Q+Q†Q + Q^{\dagger} and i(Q−Q†)i(Q - Q^{\dagger}), with CP parities η\eta and −η-\eta, respectively.

A common shortcut is to classify an operator as CP odd when it contains an odd number of dual field strengths. This works for the dimension-six operators with real coefficients, but fails for 170 of the 438 corresponding dimension-eight operators. For example,

Qℓ2q2B(1)=(ℓ‾γμℓ)(q‾γνq)Bμν(11)Q_{\ell^2q^2B}^{(1)} = \left(\overline{\ell}\gamma^\mu\ell\right)\left(\overline{q}\gamma^\nu q\right)B_{\mu\nu} \tag*{(11)}

is CP odd despite containing no dual field strength. Under CP, both fermion currents and the field strength change sign, giving an overall minus sign. Its partner Qℓ2q2B(2)Q_{\ell^2q^2B}^{(2)}, containing B~μν\widetilde{B}_{\mu\nu}, is instead CP even. Similar effects occur in ψ2XH2D\psi^2XH^2D, where the Higgs current replaces one of the fermion currents, and in ψ2X2D\psi^2X^2D, where the SU(2)SU(2) antisymmetric tensor can change the CP assignment. This classification also reproduces the known CP properties of operators contributing to neutral triple gauge couplings, which first arise at dimension eight [54].

Of the 236 operators with complex coefficients, the real part is CP even for 192 operators and CP odd for the remaining 44. These assignments classify the operator structures before inserting the MFV flavour tensors. The Yukawa matrices can introduce additional CP violation through their complex phases.

Implementation

We describe the construction of the event-generator models, including the input-parameter treatment and higher-order extension, followed by the tools for selecting and running a process.

Model construction

We construct the models in FeynRules from the dimension-eight operator definitions of § 3, together with the SM Lagrangian and, for the combined models, the dimension-six sector of SMEFTsim [8, 9]. Each operator is defined by its fields, derivatives and index contractions. We check the mass dimensions and gauge contractions of these definitions and construct Hermitian Lagrangian terms. We then implement the flavour structures, input parameter relations and field normalizations, and export the resulting vertices in UFO format. Identically vanishing vertices are removed to avoid problems in ALOHA [80]. The 60 baryon-number-violating operators are included in the operator definitions but not exported, since their fermion-flow structures are not supported by ALOHA.

We provide eight model variants, corresponding to two dimension-eight bases, two electroweak input schemes and the choice of including dimension-six operators. The default models use the geoSMEFT-compatible basis of § 3, while the alternative models use the corrected Murphy basis. In the default basis, dim8_mw and dim8_is contain dimension-eight operators, while dim68_mw and dim68_is also include dimension six. The suffixes denote the {MW,MZ,GF}\{M_W, M_Z, G_F\} and {α,MZ,GF}\{\alpha, M_Z, G_F\} input schemes. The Murphy-basis variants carry the additional suffix _murphy. In both schemes, we derive the input relations consistently through order 1/Λ41/\Lambda^4, including terms quadratic in dimension-six coefficients.

The dimension-eight fermionic interactions use the MFV expansion of § 3.1. By default, YuY_u and YeY_e are diagonal and Yd=VCKMdiag⁡(yd,ys,yb)Y_d = V_{\mathrm{CKM}}\operatorname{diag}(y_d, y_s, y_b), with only the top and bottom Yukawa couplings nonzero.

For the combined models, we use the dimension-six operators of SMEFTsim [8, 9] with its U(3)5U(3)^5 flavour structure. The additional field and input-parameter corrections needed at order 1/Λ41/\Lambda^4 are described in § 4.2, and their coupling-order assignments in § 4.4.

Input parameters

The electroweak parameters g1g_1, g2g_2 and vv are fixed using either {MW,MZ,GF}\{M_W, M_Z, G_F\} or {α,MZ,GF}\{\alpha, M_Z, G_F\}. In the SMEFT, higher-dimensional operators modify the relations between these inputs and the Lagrangian parameters through field normalizations, electroweak mixing and corrections to the measured processes. For example, operators contributing to muon decay shift the relation between GFG_F and the Higgs vacuum expectation value, so the SMEFT value vˉT\bar{v}_T differs from v^T=(2GF)−1/2\hat{v}_T = \left(\sqrt{2}G_F\right)^{-1/2}. An operator can therefore affect a process through the input parameters even when it has no vertex in that process. We derive the input relations through order 1/Λ41/\Lambda^4, including dimension-six-squared terms, using the geoSMEFT connections [22, 26, 57, 60]. In the {MW,MZ,GF}\{M_W, M_Z, G_F\} scheme, the electromagnetic coupling receives SMEFT corrections, while in the {α,MZ,GF}\{\alpha, M_Z, G_F\} scheme these corrections appear instead in the predicted WW mass.

We also fix αs\alpha_s, the fermion masses and the Higgs mass to their input values. The vacuum contributions of QHGQ_{HG} and QG2H4(1)Q_{G^2H^4}^{(1)} are absorbed into the gluon field and coupling, leaving interactions with at least one Higgs boson [57, 69]. Similarly, the mass contributions of ψ2H3\psi^2 H^3 and ψ2H5\psi^2 H^5 are absorbed into the Yukawa couplings, while the Higgs quartic is determined from the Higgs mass, including corrections to the potential and field normalization. All input and field corrections are expanded through order 1/Λ41/\Lambda^4. We also apply their first-order shifts to the dimension-six interactions, which generates additional terms at order 1/Λ41/\Lambda^4. These contributions carry the corresponding MadGraph5_aMC@NLO coupling orders, NP = 1 and NP = 2.

In the {α,MZ,GF}\{\alpha, M_Z, G_F\} scheme the WW mass is a prediction, so the Wilson coefficients shift it. The shifted mass enters the WW propagators and the phase space. MadGraph5_aMC@NLO assigns EFT coupling orders only to couplings, so the mass shift carries no NP order and is present in every run, including the SM run NP=0. Following SMEFTsim [9], we keep the shifted mass in the propagators rather than expanding it. Selecting NP^2==1 or NP^2==2 therefore misses part of the correction at that order, and we recover it from the runs that contain the mass shift.

Let CC denote the Wilson coefficients of both sectors, with C=0C = 0 the SM, and define t=1/Λ2t = 1/\Lambda^2. The mass shift enters the SM run and the dimension-six interference, and we expand their combination,

X(t)=σNP=0(C)−σNP=0(0)+σNP2=1(C)=x1t+x2t2+O(t3).(12)X(t) = \sigma_{\mathrm{NP}=0}(C) - \sigma_{\mathrm{NP}=0}(0) + \sigma_{\mathrm{NP}^2=1}(C) = x_1 t + x_2 t^2 + O(t^3). \tag*{(12)}

The corrections through order 1/Λ41/\Lambda^4 are then

σ1/Λ2=x1t,σ1/Λ4=σNP2=2(C)+x2t2+O(t3).(13)\sigma_{1/\Lambda^2} = x_1 t,\qquad\sigma_{1/\Lambda^4} = \sigma_{\mathrm{NP}^2=2}(C) + x_2 t^2 + O(t^3). \tag*{(13)}

The coefficient x1x_1 is the dimension-six interference together with the first-order change of the SM rate. The coefficient x2x_2 contains the change of the SM rate from the order-1/Λ41/\Lambda^4 mass shift and from the square of the order-1/Λ21/\Lambda^2 shift, and the change of the dimension-six interference from the order-1/Λ21/\Lambda^2 shift. The term σNP2=2\sigma_{\mathrm{NP}^2=2}, which contains the dimension-six square, changes with the mass only at order 1/Λ61/\Lambda^6. In the dimension-eight-only models the mass first shifts at order 1/Λ41/\Lambda^4 and σNP2=1\sigma_{\mathrm{NP}^2=1} vanishes, so x1=0x_1 = 0 and the missing term at this order is σNP=0(C)−σNP=0(0)\sigma_{\mathrm{NP}=0}(C) - \sigma_{\mathrm{NP}=0}(0).

We obtain x1x_1 and x2x_2 by evaluating X(t)X(t) at several values of Λ\Lambda, with the Wilson coefficients held fixed. Changing the fitted scales tests the extraction. The numerical validation is described in § 6, and practical choices of fit scales are discussed in Section B.2.

Higher-order two- and three-point interactions

The geoSMEFT makes higher-order calculations practical for electroweak and Higgs pole observables. At tree level, the WW and ZZ partial widths and the decay h→ffˉh \to f\bar{f} depend on two- and three-point interactions together with the input parameter relations. The geometric connections organize these interactions, allowing successive EFT corrections to be calculated within the implemented flavour expansion without constructing the complete operator basis at every higher dimension [57]. Our models extend this sector through dimension twelve.

We implement this construction by generating the operator towers associated with the connections. Most are obtained from a dimension-eight operator QQ as

CQ(8+2k)Λ4+2k(H†H)kQ,(14)\frac{C_{Q}^{(8+2k)}}{\Lambda^{4+2k}}(H^\dagger H)^k Q, \tag*{(14)}

with an independent Wilson coefficient at each dimension. We also include the additional structure in kIJAk^{A}_{IJ} that first appears at dimension ten and its CP-odd counterpart. Increasing the truncation order therefore extends a known set of towers, while retaining their flavour structures and gauge contractions.

We retain the Higgs dependence when generating the interactions, since both the vacuum values and the Higgs derivatives of the connections enter couplings such as hVVhVV and hffˉh f\bar{f}. In unitary gauge, before canonical field normalization,

(H†H)k=(vˉT+h)2k2k.(15)(H^\dagger H)^k = \frac{(\bar{v}_{T}+h)^{2k}}{2^k}. \tag*{(15)}

We generate the full products (H†H)kQ(H^\dagger H)^k Q in FeynRules, including the Higgs dependence of both the prefactor and QQ. The two- and three-point classification counts the fields in the resulting interaction after symmetry breaking: hVVhVV and hffˉh f\bar{f} are three-point vertices, whereas hhVVhhVV is a four-point vertex.

The construction takes the desired order NN in 1/Λ21/\Lambda^2 as an input. Thus N=2N=2 includes contributions through dimension eight, while N=4N=4 extends the two- and three-point interactions through dimension twelve. We perform this extension in the {MW,MZ,GF}\{M_W,M_Z,G_F\} input scheme. Alongside the operator towers, we expand the field normalizations, electroweak mixing, input parameter relations, Higgs potential and Yukawa couplings through the same order. Products of lower-order corrections are retained whenever they contribute through 1/Λ2N1/\Lambda^{2N}. The determination of GFG_F also includes the higher-dimensional four-lepton contributions to muon decay [60], to which we add the interference and squared terms from the Yukawa-suppressed scalar coupling.

We export the resulting interactions in UFO format. Vertices with at most three fields keep every term through order 1/Λ2N1/\Lambda^{2N}, while vertices with four or more fields keep the terms through 1/Λ41/\Lambda^4, as in dim68_mw. We provide the models with N=2N=2 and N=4N=4, dim68_mw-geo2 and dim68_mw-geo4. Through order 1/Λ41/\Lambda^4 both are dim68_mw, and in dim68_mw-geo4 the higher orders are requested in MadGraph5_aMC@NLO with NP<=4. We validate both models in § 6.

We illustrate the higher-order calculation with the leptonic ZZ width [26, 60]. Figure 1 compares the size of each order in 1/Λ21/\Lambda^2 with the relative uncertainty of the LEP measurement [81] and an estimate for FCC-ee.1 For this benchmark, the correction at order 1/Λ41/\Lambda^4 remains larger than the estimated FCC-ee uncertainty for scales up to about 11 TeV. Computing the higher orders allows us to assess how far the EFT expansion must be retained for a given coefficient choice and experimental precision.

Figure 1. Relative size of successive orders in 1/Λ21/\Lambda^2 in the leptonic ZZ width, with Cj(d)=1C_j^{(d)}=1 for every Wilson coefficient that enters the decay. Each curve is ∣ΓN−ΓN−1∣/ΓSM|\Gamma_N-\Gamma_{N-1}|/\Gamma_{\mathrm{SM}}, where ΓN\Gamma_N is the tree-level width in dim68_mw_geo4 truncated at order 1/Λ2N1/\Lambda^{2N} with every product of amplitudes at that order, so the curve at order 1/Λ41/\Lambda^4 includes the dimension-six terms at second order. The dashed lines are the relative uncertainty of the LEP measurement and the FCC-ee estimate.

Extracting a pole width from a simple resonant process, such as e+e−→Z→μ+μ−e^+e^- \to Z \to\mu^+\mu^-, also requires controlling contributions that do not pass through the resonance. For a narrow, isolated resonance, two small parameters enter,

ϵ=v2Λ2,δ=ΓM,(16)\epsilon= \frac{v^2}{\Lambda^2}, \qquad\delta= \frac{\Gamma}{M}, \tag*{(16)}

where MM and Γ\Gamma are the resonance mass and width. For a continuum that varies smoothly across the resonance, the corrections relative to the leading pole amplitude A0A_0 scale schematically as

ΔApole(n)A0∼Cnϵn,ΔAcontinuum(m)A0∼Dmδϵm,(17)\frac{\Delta\mathcal{A}_{\mathrm{pole}}^{(n)}}{\mathcal{A}_0} \sim C_n \epsilon^n,\qquad\frac{\Delta\mathcal{A}_{\mathrm{continuum}}^{(m)}}{\mathcal{A}_0} \sim D_m \delta\epsilon^m, \tag*{(17)}

where CnC_n and DmD_m represent the relevant coefficient combinations. The additional δ\delta reflects the absence of the resonant enhancement [22]. For comparable coefficients and coupling factors, an omitted continuum contribution can compete with a retained pole correction when ϵn−m≲δ\epsilon^{n-m} \lesssim\delta. Both expansions therefore help determine which terms must be included when using higher-order pole predictions to interpret scattering data.2

The relations between vertices with different Higgs multiplicities can help distinguish contributions from different operator dimensions. Comparisons across these channels must also include independent higher-point interactions. For example, a qqˉhZq\bar{q}hZ contact interaction outside the geometric connections can contribute to qqˉ→hZ→hℓ+ℓ−q\bar{q} \to hZ \to h\ell^{+}\ell^{-} with the same ZZ resonance as the geometric terms [22]. Unlike the continuum contributions of Equation (17), it is therefore not suppressed by δ\delta. Our complete dimension-eight models include these contributions. Beyond dimension eight, these analyses require both the higher-point vertices from the geometric towers and the independent higher-point interactions. As geometric descriptions of additional higher-point interactions are developed, they can be incorporated into the automation. This would extend the higher-order treatment to more general resonant processes.

Operator selection and code usage

Only a subset of the dimension-eight operators can contribute to a given process. We provide a selector that identifies possible tree-level contributions before diagram generation. Using the vertices generated by FeynRules, it connects operator interactions to the external particles through SM vertices and propagators, and includes contributions through the input parameter relations. This identifies operators that may contribute. It does not require their interference with the SM to be nonzero. Selection runs without MadGraph5_aMC@NLO and requires no model rebuild.

The models and scripts are available at https://github.com/benleo12/autom8smeft. The released UFO models can be imported directly into MadGraph5_aMC@NLO without running FeynRules or Mathematica. Figure 2 gives the command templates, with PROCESS standing for the requested process and sel naming the restriction card. A runnable example is given in Section B.1.

Workflow for selecting operators and generating a process

Figure 2. Workflow for selecting operators and generating a process. The selector uses the model’s vertices to find contributing operators and create a restriction card. MadGraph then computes the requested EFT contributions. Grey entries apply to the combined dimension-six/eight models. The dimension-eight square is obtained in a dimension-eight-only model, or with the dimension-six coefficients switched off in a combined model. Rebuilding the model with FeynRules requires Mathematica, but selecting and running operators does not.

For combined models, the selector also accounts for contributions with two dimension-six insertions, including corrections to dimension-six interactions from field and input parameter shifts. Choosing --model dim68_mw --with-dim6 retains the selected coefficients from both dimensions. Without --with-dim6, the written restriction card sets the dimension-six coefficients to zero.

The selector also uses the energy counting of § 5 to assign powers of λ\lambda to the contributions. With --max-power N, the restriction card retains operators whose assigned power lies within NN powers of λ\lambda above the SM amplitude. In combined models, it also retains dimension-six coefficients that enter only with a second insertion, for which the counting assigns no power. Other entries without an assigned power are excluded by this cut. This optional selection focuses the calculation on contributions expected to grow fastest relative to the SM at high energies, v≪E≪Λv \ll E \ll\Lambda.

Wilson coefficients are set in the run’s parameter card: dimension-eight coefficients appear in DIM8, additional MFV flavour coefficients in DIM8F, and dimension-six coefficients in DIM6. The nonzero values in a restriction card are placeholders that preserve the selected parameters during model import. Their physical values are set subsequently in the parameter card. Inputs that vanish at import can also remove interactions. Calculations requiring nonzero light-fermion Yukawa couplings therefore use restriction cards generated with those couplings nonzero. Each model also provides cards for individual operator classes and useful combinations.

In MadGraph5_aMC@NLO, the coupling order NP counts powers of 1/Λ21/\Lambda^{2}. Thus NP^2==1 selects the dimension-six interference, while NP^2==2 selects contributions at order 1Λ4\frac{1}{\Lambda^{4}}. These include the dimension-eight interference, the square of the first-order dimension-six amplitude, and the SM interference with amplitude terms quadratic in dimension-six coefficients. In a dimension-eight-only model, NP2=2\mathrm{NP}^{2}=2 gives the dimension-eight interference, and NP2=4\mathrm{NP}^{2}=4 gives its square. The additional treatment of the shifted WW mass in the {α,MZ,GF}\{\alpha, M_Z, G_F\} scheme is described in § 4.2. Section B.1 gives the commands for a first calculation.

The selector identifies which operators matter for the requested process and writes a restriction card for MadGraph5_aMC@NLO. MadGraph5_aMC@NLO already finds the allowed diagrams, but it first prepares the model, including interactions irrelevant to that process. The restriction card removes those interactions during import, reducing this preparation work. The operator list and energy counting can also guide calculations with other event generators.

Operator contributions and energy scaling

The selector identifies operators that can contribute to a requested process. Here we explain the possible contributions through contact interactions, exchange diagrams and input-parameter shifts, and introduce a general counting of their energy dependence. This counting helps identify the interactions that can become most visible relative to the SM at high energies. We then describe how the rules apply to complete tree diagrams and different polarizations. Explicit amplitude expansions for representative processes are collected in Section C.

Routes into a process

Operators can contribute through contact interactions involving all external particles, through exchange diagrams, or through shifts of the input parameters. Figure 3 illustrates these possibilities in one process, pp→W+W−pp \to W^{+}W^{-}. The selection procedure applies the same tests to any requested external state.

Figure 3. Four examples of dimension-eight contributions to pp→W+W−pp \to W^{+}W^{-}. A filled circle is a dimension-eight vertex and an open circle an SM one.

The selector takes a vertex from a SMEFT operator and tries to connect it to the particles of the process using SM vertices. If it can, the operator is kept. In Figure 3(a), the new vertex already has all four particles of the process, so nothing else is needed. In Figure 3(b), it has the two WW bosons and a ZZ. An SM vertex connects the ZZ to the incoming quark pair, completing the diagram. The selector tries each vertex supplied by the operator and can add chains of SM vertices if needed. It checks whether these connections are possible without calculating matrix elements.3

For two dimension-six insertions, the selector tests pairs of vertices from the same operator or from two different operators. It connects the pair through a propagator or a chain of SM interactions, then completes the remaining connections with SM vertices. Operators that can contribute this way through order 1/Λ41/\Lambda^{4} are retained.

Input-parameter contributions are handled separately. The code checks whether the process admits an SM tree containing an electroweak vertex. If so, it also retains the operators entering the electroweak input relations of the selected model. Their coefficients can modify the electroweak parameters in the amplitude even when their own interaction vertices do not enter its tree diagrams. In Figure 3, panel (c) illustrates an input-parameter shift. Panel (d) shows a contact interaction in a channel without a tree-level SM amplitude. The selector retains this contribution as well. With dimension-six coefficients set to zero, its first tree-level contribution to the partonic cross section is the dimension-eight square, at order 1/Λ81/\Lambda^{8}.

Energy counting

High-energy collider measurements offer sensitivity to heavy new particles through their virtual effects. Higher-dimensional interactions can generate contributions that grow relative to the SM prediction, making the tails of kinematic distributions promising places to search for deviations. Operators of the same mass dimension can differ substantially in this behaviour because they carry different powers of energy and the Higgs vacuum expectation value. We use the energy counting of Ref. [61] in the regime v≪E≪Λv \ll E \ll\Lambda to identify contributions with the strongest growth relative to the SM. This organizes the calculation around the effects that can become most visible above the SM background, while allowing subleading contributions to be included systematically.

The high-energy expansion complements the geoSMEFT treatment of pole observables. In an on-shell two-body decay, such as Z→ffˉZ \to f\bar{f} or h→ffˉh \to f\bar{f}, the kinematics are fixed by the particle masses and the relevant expansion is in v/Λv/\Lambda [57, 61]. Scattering processes with four or more external particles can instead probe energies far above vv. Three-point vertices can enter these processes through internal lines, as in panel (b) of Figure 3, and their energy dependence must then be assessed within the complete diagram.

We organize the double expansion in v/Λv/\Lambda and E/ΛE/\Lambda using a single dimensionless power counting parameter,

(Λ,E,v)∼(λ−3,λ−2,λ−1).(\Lambda,E,v) \sim(\lambda^{-3},\lambda^{-2},\lambda^{-1}).

Consider a dimension-eight operator containing NfN_f fermions, NHN_H Higgs fields, NXN_X field strengths and NDN_D derivatives. For an nn-leg contact interaction, its field content allows the leading scaling

An(8)∼E8−n−pvpΛ4∼λ2n−4+p,p=max⁡[Nf+NX+NH−n,0],(18)\begin{aligned} \mathcal{A}^{(8)}_n &\sim\frac{E^{8-n-p}v^p}{\Lambda^4} \sim\lambda^{2n-4+p},\\ p&=\max[N_f+N_X+N_H-n,0], \tag*{(18)} \end{aligned}

where Wilson coefficients and SM coupling factors are suppressed. The integer pp is the minimum number of Higgs fields that must be replaced by their vacuum expectation value.

An unsuppressed SM amplitude has the reference scaling AnSM∼E4−n\mathcal{A}^{\mathrm{SM}}_n \sim E^{4-n}. The relative dimension-eight contribution therefore scales as

An(8)AnSM∼E4Λ4(vE)p.\frac{\mathcal{A}^{(8)}_n}{\mathcal{A}^{\mathrm{SM}}_n}\sim\frac{E^4}{\Lambda^4}\left(\frac{v}{E}\right)^p.

This expression makes the physical ordering transparent. Contributions with p=0p=0 have the strongest relative growth, while each additional vacuum insertion introduces a suppression of v/Ev/E. At four legs, the corresponding powers are λ4\lambda^4 for E4/Λ4E^4/\Lambda^4, λ6\lambda^6 for E2v2/Λ4E^2v^2/\Lambda^4, and λ8\lambda^8 for v4/Λ4v^4/\Lambda^4. Their numerical importance also depends on the Wilson coefficients, couplings and interference with the SM.

A class generally contains several vertices with the same number of legs. Whether a particular operator and external state realize the leading power depends on the gauge contractions and polarization. For example, QG2H2D2(1)Q^{(1)}_{G^2H^2D^2} has a gghhgghh vertex with no vacuum insertion, giving λ4\lambda^4. Its ggW+W−ggW^+W^- vertex instead obtains both WW bosons from covariant derivatives acting on Higgs vacuum values. For transverse WW bosons, this contribution scales as λ6\lambda^6.

The allowed vertex multiplicities follow from the same field content. Fermions and field strengths each supply at least one leg. A differentiated Higgs field also supplies a leg when replaced by its vacuum value, through the gauge-field term in Dμ⟨H⟩D_\mu\langle H\rangle. At most, a non-Abelian field strength supplies two gauge bosons and each covariant derivative supplies one additional gauge boson. Thus

max⁡[Nf+NX+NHD,3]≤n≤Nf+NH+2NX+ND.(19)\max[N_f+N_X+N_{HD},3]\le n\le N_f+N_H+2N_X+N_D. \tag*{(19)}

Here NHDN_{HD} is the smallest number of differentiated Higgs fields among the terms of the operator or class under consideration, after writing derivatives as acting on individual fields. The lower bound of three excludes the vacuum energy, tadpoles and two-point terms, which are treated through the vacuum condition, field normalizations and input relations (§ 4.2). Particular gauge contractions or external particles can further restrict the allowed vertices.

The differentiated Higgs fields raise the lower bound to four for H4D4H^4D^4, X2H2D2X^2H^2D^2, ψ2XH2D\psi^2XH^2D, ψ2XHD2\psi^2XHD^2 and ψ2H3D2\psi^2H^3D^2. These classes have no three-point vertex. The operators replacing ψ2H2D3\psi^2H^2D^3 in the default basis also have no three-point vertex (§ 3).

classλ\lambda at n=n =
456
1X4X^4λ4\lambda^4λ6\lambda^6λ8\lambda^8
2H8H^8λ8\lambda^8λ9\lambda^9λ10\lambda^{10}
3H6D2H^6D^2λ6\lambda^6λ7\lambda^7λ8\lambda^8
4H4D4H^4D^4λ4\lambda^4λ6\lambda^6λ8\lambda^8
5X3H2X^3H^2λ5\lambda^5λ6\lambda^6λ8\lambda^8
6X2H4X^2H^4λ6\lambda^6λ7\lambda^7λ8\lambda^8
7X2H2D2X^2H^2D^2λ4\lambda^4λ6\lambda^6λ8\lambda^8
8XH4D2XH^4D^2λ5\lambda^5λ6\lambda^6λ8\lambda^8
9ψ2X2H\psi^2X^2Hλ5\lambda^5λ6\lambda^6λ8\lambda^8
10ψ2XH3\psi^2XH^3λ6\lambda^6λ7\lambda^7λ8\lambda^8
11ψ2H2D3\psi^2H^2D^3λ4\lambda^4λ6\lambda^6λ8\lambda^8
classλ\lambda at n=n =
456
12ψ2H5\psi^2H^5λ7\lambda^7λ8\lambda^8λ9\lambda^9
13ψ2H4D\psi^2H^4Dλ6\lambda^6λ7\lambda^7λ8\lambda^8
14ψ2X2D\psi^2X^2Dλ4\lambda^4λ6\lambda^6λ8\lambda^8
15ψ2XH2D\psi^2XH^2Dλ5\lambda^5λ6\lambda^6λ8\lambda^8
16ψ2XHD2\psi^2XHD^2λ4\lambda^4λ6\lambda^6λ8\lambda^8
17ψ2H3D2\psi^2H^3D^2λ5\lambda^5λ6\lambda^6λ8\lambda^8
18ψ4H2\psi^4H^2λ6\lambda^6λ7\lambda^7λ8\lambda^8
19ψ4X\psi^4X–λ6\lambda^6λ8\lambda^8
20ψ4HD\psi^4HDλ5\lambda^5λ6\lambda^6λ8\lambda^8
21ψ4D2\psi^4D^2λ4\lambda^4λ6\lambda^6λ8\lambda^8

Table 3. Leading powers allowed by the field content of each dimension-eight class at four, five and six legs. Within a column, a smaller power corresponds to stronger relative energy growth. Additional vacuum insertions give higher powers of λ\lambda. The entries λ4\lambda^4, λ6\lambda^6 and λ8\lambda^8 at four, five and six legs have p=0p=0 and scale as E4/Λ4E^4/\Lambda^4 relative to an unsuppressed SM amplitude. A dash indicates the absence of a contact vertex with that multiplicity. The power realized in a process also depends on its external particles and polarizations.

At four legs, seven classes allow p=0p=0. Three are bosonic, X4X^4, H4D4H^4D^4 and X2H2D2X^2H^2D^2. Three contain a fermion pair, ψ2X2D\psi^2X^2D, ψ2H2D3\psi^2H^2D^3 and ψ2XHD2\psi^2XHD^2. The seventh is ψ4D2\psi^4D^2. Additional external particles can expose stronger energy growth from other classes. Fourteen classes allow p=0p=0 at five legs, and every class except H8H^8 and ψ2H5\psi^2H^5 allows it at six. The class ψ4X\psi^4X first contributes through a five-point vertex because none of its four fermions or its field strength can be replaced by a vacuum value.

Energy growth produces a leading interference contribution only when the SM has a nonzero amplitude with matching external helicities [83]. With light-fermion masses and Yukawa couplings neglected, contributions whose external chiralities cannot match an SM amplitude do not interfere. This excludes the chirality-changing structures of ψ2XHD2\psi^2XHD^2 and eight of the 47 baryon-number-conserving operators in ψ4D2\psi^4D^2,

QleqdD2(1,2),Qq2udD2(1,2,3),QlequD2(1,2,3).Q_{\mathrm{leqdD2}}^{(1,2)}, \qquad Q_{q^2udD^2}^{(1,2,3)}, \qquad Q_{\mathrm{lequD2}}^{(1,2,3)}.

The counting therefore identifies the potential energy enhancement, while the available SM amplitudes determine whether that enhancement appears in the interference.

Amplitude expansion and polarization

Our earlier counting assigns powers of λ\lambda to individual vertices [61]. Here the code builds tree diagrams for a chosen process and adds the powers from their vertices and propagators. The result gives the leading allowed powers of the amplitude A\mathcal{A}, before squaring. The counting rules of Equation (18) apply to each vertex and propagator. An SM three-point contribution scales as λ−2\lambda^{-2} when a momentum or fermion wavefunctions supply a power of energy, and as λ−1\lambda^{-1} when it is proportional to vv. An SM four-point vertex has weight λ0\lambda^{0}, and a propagator has weight λ4\lambda^{4}. A dimension-dd vertex with mm legs and pp vacuum insertions has weight

λd−12+2m+p.\lambda^{d-12+2m+p}.

Adding these weights gives the power of each tree. For each operator class and topology, we retain the smallest power.

The unsuppressed SM reference amplitude for nn external particles scales as λ2n−8\lambda^{2n-8}. A dimension-eight contribution four powers of λ\lambda above this reference has relative growth E4/Λ4E^{4}/\Lambda^{4}. Additional vacuum insertions reduce the energy enhancement as described in Equation (18).

Knowing the diagram also tells us which legs are external. We can therefore specify their polarizations and count transverse and longitudinal W/ZW/Z states separately.4 For each longitudinal boson, Goldstone equivalence [84, 85, 86] gives a Goldstone component and a residual gauge component carrying an extra factor MV/E∼λM_{V}/E \sim\lambda. The code counts the allowed trees for both components using the same vertex and propagator rules, then keeps the smallest power.

The command ./dim8 series constructs the expansion for a requested process using the selected model’s vertices. The default combined model includes dimension-six and dimension-eight operators. The --model option selects the basis and input scheme, and the code checks that the vertex data agree with that model. Contributions entering only through the input relations are listed separately, with leading relative weights λ4\lambda^{4} at dimension six and λ8\lambda^{8} at dimension eight.

The restriction to one EFT insertion applies only to the displayed energy-counting series, which retain the leading power of each class in each topology. The combined models include the dimension-six square and amplitudes with two dimension-six insertions, as described in § 4.4. The powers classify the allowed amplitude contributions. The interference also depends on their helicities and on cancellations in the complete amplitude. Section C gives explicit expansions for the processes used in the phenomenological studies.

Validation

We validate the implementation through comparisons with independent models, numerical tests of Lorentz invariance and CP, and checks of the input-parameter treatment, operator selector and higher-order interactions.

We verify the geoSMEFT structure directly from the generated vertices, including Goldstone bosons. In the default basis, every dimension-eight operator contributing to a vertex with at most three fields belongs to the geoSMEFT connections. The corresponding check in the Murphy basis finds the fifteen additional operators of ψ2H2D3\psi^{2}H^{2}D^{3}.

For dimension eight, we compare our Feynman rules with SmeftFR v3 [49] and models developed independently for our previous work. The SmeftFR comparison covers 87 of the 89 bosonic operators. For 44 operators, all Feynman rules of the difference between the two Lagrangians vanish. For the remaining 43 operators in X4X^{4}, we establish equality directly as polynomials in the field strengths. The two operators in H6D2H^{6}D^{2} are excluded because the bases differ by equations of motion. Our earlier implementations provide additional operator-by-operator comparisons in both the bosonic and fermionic sectors. We also reproduce the dimension-eight interference in published studies of Higgs production in vector-boson fusion [23], Drell–Yan production [29] and diboson production [32], as well as the dimension-six and dimension-eight corrections to the ZZ-boson couplings up to order 1/Λ41/\Lambda^{4} [26].

We compare the dimension-six sector with SMEFTsim [8, 9] in both input schemes. With dimension-eight coefficients set to zero, we vary all 85 real dimension-six parameters individually and compare the vertices at order 1/Λ21/\Lambda^{2}. All 1648 comparisons in the {MW,MZ,GF}\{M_W,M_Z,G_F\} scheme and all 1639 in the {α,MZ,GF}\{\alpha,M_Z,G_F\} scheme agree. These comparisons include the input-parameter corrections and the operators QHGQ_{HG} and ψ2H3\psi^{2}H^{3}, whose implementation differs from SMEFTsim. The comparison is restricted to first order because our models also include dimension-six-squared corrections.

We validate the fixed-order extraction described in § 4.2 using the combined {α,MZ,GF}\{\alpha,M_Z,G_F\} model, with all Wilson coefficients set to one. In udˉ→e+νeu\bar{d}\to e^{+}\nu_e, the reconstructed 1/Λ41/\Lambda^{4} contribution agrees with an independent expansion of the full squared amplitude at fixed phase-space points. This tests both the mass shift of the dimension-six interference and the contribution quadratic in the dimension-six mass shift. For the integrated cross section at 13.6 TeV, with meν>100m_{e\nu}>100 GeV and Λ=3\Lambda=3 TeV, the full 1/Λ41/\Lambda^{4} contribution is 26.1 fb. The NP2=2NP^{2}=2 contribution evaluated at the unshifted mass supplies 14.6 fb. Including the extracted mass-shift terms reproduces the full result to within 0.2 fb.

The mass shifts can also change the sign of the leading correction. In pp→W+W−pp\to W^{+}W^{-} at 13.6 TeV with Λ=3\Lambda=3 TeV, NP2=1NP^{2}=1 gives −1.38-1.38 pb, while the complete 1/Λ21/\Lambda^{2} contribution is +0.53±0.04+0.53\pm0.04 pb. At order 1/Λ41/\Lambda^{4}, the mass shifts add +0.26±0.08+0.26\pm0.08 pb to the 1.12 pb supplied by NP2=2NP^{2}=2. The quoted uncertainties are errors on the mean estimated from three independent random seeds.

We test Lorentz invariance in the exported UFO models using the check lorentz command of MADGRAPH5_AMC@NLO. For processes with external massless gauge bosons, this test is sensitive to violations of Ward identities. With all dimension-eight coefficients set to 0.7 and Λ=1\Lambda=1 TeV, all 29 tested processes pass in each of the four default-basis models. Omitting the SMEFT corrections to the input parameters and field normalizations causes eleven processes to fail, including uuˉ→ggu\bar{u}\to gg, gg→gggg\to gg, gg→ggggg\to ggg and udˉ→W+γu\bar{d}\to W^{+}\gamma. These controls demonstrate the importance of including those corrections consistently. With dimension-six coefficients switched on, all 29 processes pass at both NP≤1NP\leq1 and NP≤2NP\leq2 in the two combined models of the default basis. Electroweak processes also pass with both vectors switched on.

We test the CP assignments using five inclusive processes: pp→W+W−pp \to W^{+}W^{-}, ZZZZ, ZhZh, e+e−γe^{+}e^{-}\gamma and e+e−ge^{+}e^{-}g. For the CP-symmetric phase-space and luminosity combinations used here, CP-odd contributions cannot interfere with the SM in the total rate. We switch on the 153 CP-odd operators with real coefficients and the CP-odd components of the 236 operators with complex coefficients. Their interference is consistent with zero in all five processes, while their squared contributions remain nonzero. The additional flavour structures are tested with nonzero light-fermion masses and Cabibbo angle at Λ=3\Lambda= 3 TeV. Their 1108 CP-odd components also give interference consistent with zero, while the CP-even components give nonzero interference.

As a control, we repeat the tests with the dual-counting assignment of § 3.4. The 86 operators classified as CP odd only by dual counting give nonzero interference, whereas the 84 classified as CP odd by our derivation give interference consistent with zero.

We further check the completeness of the operator selector against MadGraph5_aMC@NLO. For representative processes, we generate diagrams using only the dimension-eight operators excluded by the selector and find no diagrams with a dimension-eight insertion. At dimension six, contributions from different vertices can cancel, so we compare squared matrix elements through order 1/Λ41/\Lambda^4, with and without the excluded coefficients. They agree at the tested phase-space points. These checks test the selection of contributions through both contact and exchange diagrams.

Finally, we test the higher-order construction in the {MW,MZ,GF}\{M_W, M_Z, G_F\} scheme against the geoSMEFT relations. The two-point functions and fermion masses must retain their canonical input values through order 1/Λ2N1/\Lambda^{2N}, with residual corrections scaling as Λ−2(N+1)\Lambda^{-2(N+1)}. We compare the left-handed WW-electron coupling, at zero electron Yukawa coupling, with its all-orders expression [57, 60] expanded to the chosen order. For vertices with at most three fields and no external Higgs boson, we compare the term linear in each tower coefficient with its dimension-eight parent. After factoring out the Wilson coefficients and powers of Λ\Lambda, the ratio must be (v2/2)k(v^2/2)^k for the descendant (H†H)kQ(H^\dagger H)^k Q. At N=2N = 2, the construction also reproduces the two- and three-point vertices of the ordinary dimension-six/eight model.

We run these tests on the models with N=2N = 2 and N=4N = 4. In both, the residuals of the two-point functions, the fermion masses and the WW-electron coupling fall as Λ−2(N+1)\Lambda^{-2(N+1)}. The comparison with a dimension-eight parent cannot test the two towers that have none. The first is the additional structure in kJIk^I_J, with its CP-odd counterpart. At the vacuum its operator of dimension ten gives the vertices W+W−γW^{+}W^{-}\gamma, hZγhZ\gamma and hZZhZZ of QWH4D2(1)Q^{(1)}_{WH^4D^2}, or of QWH4D2(2)Q^{(2)}_{WH^4D^2} for the CP-odd counterpart, multiplied by v2/2v^2/2. The second is a four-lepton operator that first appears at dimension ten. It reaches the vertices only through the relation for GFG_F, where it acts as Ql4H2(1)Q^{(1)}_{l^4H^2} multiplied by −v2/2-v^2/2. We test both relations, and compare the members of dimension twelve of these towers with those of dimension ten.

We also check that every coupling of the exported models scales as Λ−2n\Lambda^{-2n} with its NP order nn, and that no term is dropped or counted twice, by comparing every vertex with dim68_mw through 1/Λ41/\Lambda^4 and every vertex with at most three fields with the untruncated interactions beyond that order.

Dimension-eight effects in four LHC studies

We use four LHC studies to illustrate how the operator contributions identified above appear in cross sections and kinematic distributions: diboson production, triboson production, Higgs-pair production in vector-boson fusion and high-mass Drell–Yan production. These twelve processes probe complementary combinations of gauge, Higgs and fermion interactions.

All studies use dim8_mw, which contains no dimension-six sector. We calculate the interference of a single dimension-eight insertion with the SM at order 1/Λ41/\Lambda^4, including the input-parameter corrections. We also calculate the square of the single-insertion amplitude at order 1/Λ81/\Lambda^8 to compare its size with the interference. The calculations use MadGraph5_aMC@NLO with the coupling orders and restriction cards described in § 4. The study scripts are released with the models.

We consider proton-proton collisions at a centre-of-mass energy of 13.6 TeV and take Λ=3\Lambda= 3 TeV. Each real Wilson coefficient switched on is set to one. For complex coefficients, both the real and imaginary parts are set to one. These choices also apply to the additional MFV flavour structures. At fixed coefficients and cuts, changing Λ\Lambda rescales the interference by (3 TeV/Λ)4(3\ \mathrm{TeV}/\Lambda)^4 and the squared contribution by (3 TeV/Λ)8(3\ \mathrm{TeV}/\Lambda)^8.

All cross sections are computed at leading order using the NNPDF2.3 QED LO set with αs(MZ)=0.130\alpha_s(M_Z) = 0.130 [87]. The initial-state partons and jets comprise gluons and the u,d,s,cu,d,s,c quarks and antiquarks. The renormalisation and factorisation scales are set event by event to HT/2H_T/2, and the gauge and Higgs bosons are on shell and undecayed. We use

MW=80.387 GeV,MZ=91.1876 GeV,GF=1.16637×10−5 GeV−2,M_W = 80.387\ \mathrm{GeV}, \qquad M_Z = 91.1876\ \mathrm{GeV}, \qquad G_F = 1.16637 \times10^{-5}\ \mathrm{GeV}^{-2},

together with mh=125m_h = 125 GeV and mt=172m_t = 172 GeV. These electroweak inputs give α−1=132.25\alpha^{-1} = 132.25 at tree level.

The tables and figures use runs of 10510^5 events for each SM rate, interference and square, and of 10610^6 events where 10510^5 leaves a Monte Carlo error above five per cent. The kinematic cuts for all processes, the run records and the consistency checks are given in Section D.

Cross sections and operator contributions

Switching on one operator class at a time separates the effects of different field contents, while retaining the interference among operators within that class in the squared term. A short worked example is provided in Section B.1.

We characterize each class by

δ=σ1/Λ4σSM,R=σ1/Λ8∣σ1/Λ4∣,(20)\delta= \frac{\sigma_{1/\Lambda^4}}{\sigma_{\mathrm{SM}}}, \qquad R = \frac{\sigma_{1/\Lambda^8}}{\lvert\sigma_{1/\Lambda^4}\rvert}, \tag*{(20)}

where σ1/Λ4\sigma_{1/\Lambda^4} is the interference with the SM and σ1/Λ8\sigma_{1/\Lambda^8} denotes the square of the single-insertion dimension-eight amplitude. The signed quantity δ\delta measures the change in the rate relative to the SM. The ratio RR compares the squared contribution with the magnitude of the interference.

Table 4 collects one process from each study, and Table 6 in Section D extends the interference results to all twelve processes. The pattern of nonzero entries identifies which interactions each process probes. Comparing their sizes then shows how strongly the chosen coefficients affect the inclusive rates. The following subsections discuss these patterns and the additional information in the kinematic distributions. The ratio depends on the coefficient choice and cuts. Under a common rescaling Ci→aCiC_i \to aC_i within a class, R→∣a∣RR \to\lvert a\rvert R. Its interpretation as a truncation diagnostic is discussed in § 7.3.

classpp→W+W−pp \to W^{+}W^{-} δ\delta [10−410^{-4}]pp→W+W−pp \to W^{+}W^{-} RRpp→W+W−W+pp \to W^{+}W^{-}W^{+} δ\delta [10−410^{-4}]pp→W+W−W+pp \to W^{+}W^{-}W^{+} RRpp→HHjjpp \to HHjj δ\delta [10−410^{-4}]pp→HHjjpp \to HHjj RRpp→e+e−pp \to e^{+}e^{-} δ\delta [10−410^{-4}]pp→e+e−pp \to e^{+}e^{-} RR
1 X4\mathrm{X}^{4}*[81]+16.41.0––––
2 H8\mathrm{H}^{8}––––+5.77< 0.01––
3 H6D2\mathrm{H}^{6}\mathrm{D}^{2}−0.01< 0.01−0.01< 0.01−0.30< 0.01−0.60< 0.01
4 H4D4\mathrm{H}^{4}\mathrm{D}^{4}––−0.03< 0.01+11.40.011––
5 X3H2\mathrm{X}^{3}\mathrm{H}^{2}−0.010.011−0.020.27––––
6 X2H4\mathrm{X}^{2}\mathrm{H}^{4}−0.060.12+0.44< 0.01−13.30.059−0.98< 0.01
7 X2H2D2\mathrm{X}^{2}\mathrm{H}^{2}\mathrm{D}^{2}*[1.3]−0.010.17+8.526.4––
8 XH4D2\mathrm{X}\mathrm{H}^{4}\mathrm{D}^{2}−0.01< 0.01−0.09< 0.01−0.54< 0.01––
9 ψ2X2H\psi^{2}\mathrm{X}^{2}\mathrm{H}––––––––
10 ψ2XH3\psi^{2}\mathrm{X}\mathrm{H}^{3}––––––––
11 ψ2H2D3\psi^{2}\mathrm{H}^{2}\mathrm{D}^{3}−0.134.5−8.492.4−1.1012––
12 ψ2H5\psi^{2}\mathrm{H}^{5}––––––––
13 ψ2H4D\psi^{2}\mathrm{H}^{4}\mathrm{D}+0.19< 0.01+2.12< 0.01+16.50.098−0.51< 0.01
14 ψ2X2D\psi^{2}\mathrm{X}^{2}\mathrm{D}−4.300.74−1125.2––*[11]
15 ψ2XH2D\psi^{2}\mathrm{X}\mathrm{H}^{2}\mathrm{D}+0.110.41+2.652.0+11.94.1––
16 ψ2XHD2\psi^{2}\mathrm{X}\mathrm{H}\mathrm{D}^{2}––––––––
17 ψ2H3D2\psi^{2}\mathrm{H}^{3}\mathrm{D}^{2}––––––––
18 ψ4H2\psi^{4}\mathrm{H}^{2}+0.45< 0.01+0.68< 0.01+22.516+4.55< 0.01
19 ψ4X\psi^{4}\mathrm{X}––––––––
20 ψ4HD\psi^{4}\mathrm{H}\mathrm{D}––––––––
21 ψ4D2\psi^{4}\mathrm{D}^{2}–––––––+20.817

Table 4. How much each dimension-eight class changes four LHC processes at order 1/Λ41/\Lambda^{4}, and how large its square is compared with that change. All entries are for the LHC at 13.6 TeV, with every coefficient of the class at one and Λ=3\Lambda= 3 TeV, and the HHjjHHjj and e+e−e^{+}e^{-} samples carry the cuts of Table 6. δ\delta is the interference with the SM (NP^2==2) in units of 10−410^{-4} of the SM rate, and R=σ1/Λ8/∣σ1/Λ4∣R = \sigma_{1/\Lambda^{8}}/\lvert\sigma_{1/\Lambda^{4}}\rvert is the square of the class over its interference. The Monte Carlo error of every entry is below five per cent. An asterisk marks a nonzero squared contribution with no tree-level SM interference. The number in square brackets gives the square in units of 10−410^{-4} of the SM rate. A dash means no diagram. The shaded classes are discussed in the text.

classW+W−W^{+}W^{-}W+ZW^{+}ZW−ZW^{-}ZZZZZW+W−W+W^{+}W^{-}W^{+}W+W−W−W^{+}W^{-}W^{-}W+W−ZW^{+}W^{-}ZW+ZZW^{+}ZZZZZZZZHHjjHHjje+e−e^{+}e^{-}e+e−γe^{+}e^{-}\gamma
σSM\sigma_{\mathrm{SM}} [pb]68.416.39.889.890.07860.04250.08970.01890.00988.7×10−48.7 \times10^{-4}1.250.0193
1 X4X^{4}*––*+16.4+12.9+3.13+11.4+33.8––*
2 H8H^{8}–––––––––+5.77––
3 H6D2H^{6}D^{2}−0.01+0.18+0.18+0.35−0.01−0.01+0.22+0.34+0.57−0.30−0.60−1.49
4 H4D4H^{4}D^{4}––––−0.03−0.03−0.01−0.03−0.11+11.4––
5 X3H2X^{3}H^{2}−0.01−0.08−0.08–−0.02−0.03+0.58−0.15––––
6 X2H4X^{2}H^{4}−0.06+1.15+1.15+2.05+0.44+0.43+1.29+2.22+4.34−13.3−0.98−3.24
7 X2H2D2X^{2}H^{2}D^{2}*––*−0.44−0.36−0.09−0.87−1.76+8.52––
8 XH4D2XH^{4}D^{2}−0.01−0.06−0.06–−0.09−0.07−0.07−0.17−0.19−0.54––
9 ψ2X2H\psi_{2}X^{2}H––––––––––––
10 ψ2XH3\psi_{2}XH^{3}––––––––––––
11 ψ2H2D3\psi_{2}H^{2}D^{3}−0.13−1.41−1.05+0.68−8.49−5.86−8.01−18.9−13.8−1.10––
12 ψ2H5\psi_{2}H^{5}––––––––––––
13 ψ2H4D\psi_{2}H^{4}D+0.19+1.19+1.16+0.64+2.12+1.99+1.49+3.92+6.18+16.5−0.51−1.58
14 ψ2X2D\psi_{2}X^{2}D−4.30−10.4−7.84−5.94−112−78.4−198−240−45.3–*−8.20
15 ψ2XH2D\psi_{2}XH^{2}D+0.11+0.83+0.73−0.27+2.65+2.25+0.58+5.84+7.18+11.9–+0.04
16 ψ2XHD2\psi_{2}XHD^{2}––––––––––––
17 ψ2H3D2\psi_{2}H^{3}D^{2}––––––––––––
18 ψ4H2\psi_{4}H^{2}+0.45+0.45+0.45+0.45+0.68+0.68+0.68+0.68+0.68+22.5+4.55+2.62
19 ψ4X\psi_{4}X–––––––––––−2.09
20 ψ4HD\psi_{4}HD––––––––––––
21 ψ4D2\psi_{4}D^{2}––––––––––+20.8−40.6

Table 6. Dimension-eight interference in the twelve benchmark processes, in units of 10−410^{-4} of the corresponding SM rate. The first row gives the SM cross sections in pb. The Monte Carlo error of every entry is below five per cent. An asterisk denotes a nonzero squared contribution without tree-level SM interference, and a dash denotes no contributing diagram. The shaded classes are discussed in the main text. The settings and cuts are given in this appendix.

Which classes contribute

The processes probe complementary sets of interactions. The pattern of entries in Table 4 and Table 6 reflects the multiplicity and gauge structure of the operator vertices, together with the flavour assumptions of the benchmark.

Vertex multiplicity provides a first selection rule. The class ψ4X\psi^{4}X requires at least five external particles because none of its four fermions or its field strength can be replaced by a vacuum value. It therefore has no contribution to ordinary dilepton production, but becomes accessible when a photon is added to the final state. Additional final-state particles can thus expose interactions that are absent in a lower-multiplicity process.

The identities of the external particles matter as well. The four-point vertices of X4X^{4}, H4D4H^{4}D^{4} and X2H2D2X^{2}H^{2}D^{2} are purely bosonic. At tree level, they cannot connect to an initial quark pair while leaving only two outgoing bosons. They can, however, contribute to the interference in triboson production. Gauge contractions further distinguish the channels. The class X3H2X^{3}H^{2} contributes to triboson channels containing charged WW bosons but gives no tree-level contribution to ZZZZZZ, since three neutral gauge fields cannot saturate its antisymmetric SU(2)SU(2) contraction.

Six chirality-flipping classes are absent under the flavour and Yukawa restrictions used here:

ψ2X2H,ψ2XH3,ψ2H5,ψ2XHD2,ψ2H3D2,ψ4HD.\psi^{2}X^{2}H,\qquad\psi^{2}XH^{3},\qquad\psi^{2}H^{5},\qquad\psi^{2}XHD^{2},\qquad\psi^{2}H^{3}D^{2},\qquad\psi^{4}HD.

Their MFV coefficients contain Yukawa matrices. Only the top and bottom Yukawa couplings are retained in these benchmarks, and neither quark appears among the external particles. Restoring light-fermion Yukawa couplings makes these interactions available, with mass-suppressed interference in the chirality-preserving SM channels.

The asterisks identify nonzero squared contributions with no tree-level SM interference. In gluon-initiated diboson production, for example, X4X^{4} and X2H2D2X^{2}H^{2}D^{2} supply contact interactions, while the SM amplitude is loop induced. Their first contribution in our tree-level, dimension-eight-only calculation is therefore the squared amplitude at order 1/Λ81/\Lambda^{8}. These channels provide access to interactions absent from the quark-initiated interference. The size and energy dependence of their squared contributions are discussed in § 7.3.

Energy growth and the truncation

High-energy distributions can make heavy new physics more visible by enhancing the SMEFT contribution relative to the SM background. The same growth can make a prediction based on the interference sensitive to the terms it omits. We therefore examine both the interference relative to the SM and the size of the squared dimension-eight amplitude across invariant-mass bins.

Comparisons with calculable terms beyond the retained order have been used to assess truncation effects in dimension-six analyses [18, 26, 29, 31, 88, 89]. The diagnostic used here omits dimension-ten interference at order 1/Λ61/\Lambda^{6} and the other terms required for a complete prediction at order 1/Λ81/\Lambda^{8}. When R>1R>1, the calculated square exceeds the magnitude of the retained interference. This does not by itself determine whether the EFT expansion converges, since suppression or cancellation of the interference can also make RR large [90]. All results below use Λ=3\Lambda= 3 TeV and unit coefficients. The distributions and cumulative upper cuts carry Monte Carlo errors obtained from the event weights and the cross-section normalisation, as described in Section B.1.

The gain in sensitivity is illustrated by pp→W+W−pp \to W^{+}W^{-} in Figure 4. For the leading interference class, ψ2X2D\psi^{2}X^{2}D, the magnitude of the interference rises from a few times 10−510^{-5} of the SM rate at low pair mass to several per cent above 1.4 TeV. The class ψ2H4D\psi^{2}H^{4}D, whose longitudinal contribution enters at λ6\lambda^{6}, grows by a factor of about six between 200 GeV and 1 TeV, reaching 10−410^{-4} of the SM rate. Over the same range, the relative contribution of X2H4X^{2}H^{4} stays nearly constant, between 0.7 and 0.9×10−50.9 \times10^{-5}.

Figure 4. The interference of ψ2X2D\psi^{2}X^{2}D in pp→W+W−pp \to W^{+}W^{-} grows with the mass of the boson pair to several per cent of the SM, and its square reaches the interference at the high-mass end. The upper panel shows the SM and the interference of the four classes named beside the curves, each switched on alone, and the lower panel the ratio of each interference to the SM. Both panels show absolute values, since the sign varies from class to class (Table 4). The grey dashed curve is the square of ψ2X2D\psi^{2}X^{2}D over the SM. The shaded bands are the Monte Carlo errors. The cross section is given per 100 GeV, with bins that widen with the mass, at 13.6 TeV, Λ=3\Lambda= 3 TeV and unit coefficients.

The square of ψ2X2D\psi^{2}X^{2}D grows more rapidly than its interference. It reaches 44 per cent of the interference magnitude between 1.6 and 2 TeV and overtakes it near 2.2 TeV. The inclusive ratio, R=0.74R = 0.74, hides this variation. About 70 per cent of the square comes from mWW>3m_{WW} > 3 TeV, above the chosen value of Λ\Lambda, compared with only 4 per cent of the interference. Restricting the sample to mWW<3m_{WW} < 3 TeV reduces RR to 0.24. For unit coefficients at Λ=3\Lambda= 3 TeV, the expansion is therefore not under control at the highest pair masses. These results motivate examining the comparison in mass bins and under upper cuts, or at smaller coefficients, before using an interference-only prediction [91].

The gluonic X4X^{4} interactions illustrate a contribution that such a prediction misses entirely at tree level. Their square is 8.1×10−38.1 \times10^{-3} of the SM rate, about twenty-two times the magnitude of the total dimension-eight interference in this benchmark. With the same coefficients, an upper cut near 1 TeV is needed to keep the cumulative X4X^{4} square below the magnitude of the ψ2X2D\psi^{2}X^{2}D interference. This is consistent with Refs. [92, 93], which find in gluon-fusion WWWW production that the square of the gluonic X4X^{4} interactions dominates at high mass. This comparison depends on the relative coefficients of the two classes and does not define a universal cutoff.

Figure 5 shows how the pattern changes in pp→HHjjpp \to HHjj. Between 200 GeV and 2 TeV, the interference relative to the SM grows by about two orders of magnitude for H4D4H^{4}D^{4} and by a factor of about thirty for X2H2D2X^{2}H^{2}D^{2}, reaching around one per cent in both cases. For H4D4H^{4}D^{4}, this growth arises in the longitudinal-vector-boson channel, as described in Section C. By contrast, the magnitude of the X2H4X^{2}H^{4} interference falls from 2.6×10−32.6 \times10^{-3} of the SM rate at low pair mass to about 10−310^{-3} above 500 GeV. The square of X2H2D2X^{2}H^{2}D^{2} overtakes its interference near 1.2 TeV, and its inclusive ratio is R=6.4R = 6.4. For ψ4H2\psi^{4}H^{2}, the square becomes comparable to the interference near the Higgs-pair threshold, making an interference-only prediction unreliable over most of the plotted range. The dip in the interference reflects a change of sign.

Figure 5. Selected dimension-eight contributions to electroweak HHjjHHjj production. The panels are as in Figure 4, with the cuts of Section D, at 13.6 TeV, Λ=3\Lambda= 3 TeV and unit coefficients. The grey curves show the squared contributions relative to the SM, with short dashes for X2H2D2X^2H^2D^2 and long dashes for ψ4H2\psi^4H^2. The shaded bands are the Monte Carlo errors.

Conclusions

We have automated the construction of tree-level SMEFT models through dimension eight and their use in collider calculations. The models include all 674 baryon-number-conserving dimension-eight operators, with minimal flavour violation for the fermionic interactions. We provide two operator bases and two electroweak input schemes, each with or without the dimension-six sector of SMEFTsim. The combined models include the input and field corrections required for predictions through order 1/Λ41/\Lambda^4, including terms quadratic in the dimension-six coefficients. The extraction follows the scheme-dependent treatment in § 4.2, including the effects of the predicted WW mass in the {α,MZ,GF}\{\alpha, M_Z, G_F\} scheme.

The default basis is adapted to the geoSMEFT, so that its two- and three-point interactions are organized by the geometric connections. Beyond dimension eight, we generate the associated operator towers and expand the field normalizations and input relations to the same order in the {MW,MZ,GF}\{M_W, M_Z, G_F\} scheme. This makes it possible to study successive EFT corrections to electroweak and Higgs pole observables without constructing the complete operator basis at every higher dimension. The extension retains independent coefficients at each dimension. Extracting pole observables from scattering data also requires assessing the narrow-width expansion and the contributions of higher-point interactions.

The operator selector makes the full dimension-eight basis practical for a specified process. It identifies possible tree-level contributions, including effects through the input parameters and contributions with two dimension-six insertions, and writes a restriction card for MadGraph5_aMC@NLO. The resulting calculation uses the standard event-generator workflow without rebuilding the model. Energy counting then identifies contributions that can grow relative to the SM background, helping to focus searches on interactions and kinematic regions with enhanced sensitivity to heavy new physics.

Our four LHC studies cover twelve processes in diboson and triboson production, Higgs-pair production through vector-boson fusion, and high-mass Drell–Yan. They illustrate how different final states probe complementary interactions and how distributions reveal effects that inclusive rates can obscure. Comparing the dimension-eight interference with the square of its amplitude identifies benchmarks and kinematic regions where an interference-only prediction omits a sizeable calculated contribution. The comparison depends on the coefficients and cuts, and assessing EFT convergence also requires the other higher-order terms.

The combined models are particularly useful for estimating truncation uncertainties. Ref. [89] uses the square of the dimension-six amplitude, which dimension-six tools already compute, to estimate the complete order-1/Λ41/\Lambda^4 dependence of dimension-six analyses. Our combined models give the complete order 1/Λ41/\Lambda^4, including the dimension-eight interference, in the same MadGraph5_aMC@NLO calculation, so this estimate can now be tested directly.

The validation combines comparisons with independent implementations, vertex-level checks against SMEFTsim, and numerical tests of the exported models. We release both the UFO models and the code that builds and checks them. The models can be imported directly into MadGraph5_aMC@NLO, and the worked example in Section B.1 gives the steps for a first calculation. Retaining explicit fermion generation indices also provides a starting point for future extensions beyond minimal flavour violation.

Code availability

The UFO models, the operator selector and the code that builds and checks the models are publicly available at https://github.com/benleo12/autom8smeft.

Acknowledgments

We used Claude Fable 5.1 (Anthropic) to extend our private implementations of about 200 operators to the full dimension-eight operator set in both the Murphy and geoSMEFT-compatible bases, and to streamline the code that builds and checks the models.

Research at Perimeter Institute is supported in part by the Government of Canada through the Department of Innovation, Science and Economic Development and by the Province of Ontario through the Ministry of Colleges and Universities. B.A. was supported in part by the Canadian AI Safety Institute Research Program at CIFAR. This work was performed in part at the Aspen Center for Physics, with support for B.A. by a grant from the Simons Foundation (1161654, Troyer). The work of AM is partially supported by the National Science Foundation under Grant Number PHY-2412701.

Conventions and CP assignment

Field and operator conventions

Table 5 summarizes the field and operator conventions used in the implementation. These fix the signs and normalizations needed to compare the generated interactions with the operator definitions. The accompanying documentation records the definitions and checks supporting these choices.

We use the covariant derivative

Dμ=∂μ+igAμ,(21)D_\mu= \partial_\mu+ igA_\mu, \tag*{(21)}

implemented in FeynRules by setting FR$DSign = -1. The FeynRules default uses the opposite sign. The two conventions are related by changing the sign in the covariant derivative together with Aμ→−AμA_\mu\to-A_\mu. Under this simultaneous change, the covariant derivative and SM predictions are unchanged, while each field strength changes sign. The Wilson coefficients therefore satisfy

Cidefault=(−1)nXCiours,(22)C_i^{\mathrm{default}} = (-1)^{n_X} C_i^{\mathrm{ours}}, \tag*{(22)}

where nXn_X is the number of field strengths in the operator. Operators built only from Higgs fields, fermions and covariant derivatives carry no relative sign.

For tensor fermion bilinears, we use σμν=i2[γμ,γν]\sigma^{\mu\nu} = \frac{i}{2}[\gamma^\mu,\gamma^\nu], implemented as an explicit antisymmetrised product of two gamma matrices.

The CP assignment

For the CP transformation defined in § 3.4, we obtain the sign η\eta from the building blocks of the operator. A scalar fermion bilinear contributes +1+1, while a vector or tensor bilinear contributes −1-1, with or without derivatives. Each field strength contributes −1-1 and each dual field strength +1+1. The additional sign for a dual comes from the Levi-Civita tensor.

Gauge-index contractions also enter the assignment. Each ϵIJK\epsilon^{IJK} or fABCf^{ABC} contributes −1-1, while dABCd^{ABC} and Kronecker deltas contribute +1+1. These signs follow from the transposition properties of the generators. For SU(2)\mathrm{SU}(2), (τI)T=sIτI(\tau^{I})^{T}=s_{I}\tau^{I} with s1s2s3=−1s_{1}s_{2}s_{3}=-1, and the corresponding relations hold for the Gell-Mann matrices. Higgs factors contribute +1+1 in the relation to the Hermitian-conjugate operator. An explicit factor of ii contributes −1-1.

We apply this rule to the corrected operator forms used in the models, including any factor of ii restored for Hermiticity. The resulting assignments are recorded in the coefficient dictionary and tested numerically as described in § 6.

Practical use and implementation checks

We begin with a short calculation using a released model. The remaining subsections describe the fixed-order extraction, comparisons with other implementations, removal of vanishing structures and operator dictionary.

A short worked example

We calculate the interference of the ψ2X2D\psi^{2}X^{2}D class with the SM in pp→W+W−pp \to W^{+}W^{-}. This example uses a released model, Python 3.11 and a working MadGraph5_aMC@NLO installation. No FeynRules or Mathematica step is required. Run the shell commands from the root of the downloaded repository. First set the path to MadGraph5_aMC@NLO and unpack the model:

export MG5_DIR=/path/to/MG5_aMC
tar -xJf models/dim8_mw.tar.xz -C models
python3.11 "$MG5_DIR/bin/mg5_aMC"

At the MadGraph5_aMC@NLO prompt, import the supplied class-14 restriction and generate the interference:

import model ./models/dim8_mw-cls14
generate p p > w+ w- NP^2==2
output ww_cls14
quit

Back in the shell, set the parameters and generate events:

python3 examples/studies/set_cards.py ww_cls14 \
    dim8_all=1 Lam=3000 MT=172 ymt=172 \
    ebeam1=6800 ebeam2=6800 nevents=100000 \
    dynamical_scale_choice=3 hel_recycling=False
python3.11 ww_cls14/bin/generate_events -f

These commands set the retained coefficients to one, Λ=3\Lambda= 3 TeV, the collider energy to 13.6 TeV and both scales to HT/2H_T/2. Helicity recycling is disabled for compatibility with the dimension-eight Lorentz structures. The card-setting script rejects unknown parameter names. The stored benchmark gives an interference of approximately −0.029-0.029 pb, with independent runs fluctuating within their Monte Carlo uncertainties. The events are written to ww_cls14/Events/run_01/.

  • Changing the process or operator selection. To select all operators that can contribute to a process, use

./dim8 select "p p > w+ w-" --card ww

For this example, the selector finds 95 operators through interaction vertices and six through the input relations alone. The restriction card retains 313 real dimension-eight coefficient entries. Import ./models/dim8-mw-ww to use it in place of the class-14 restriction. For another final state, change the process string in both the selection and generation commands and choose new card and output names. The optional command

./dim8 count "psi^2X^2D"

reports the class’s leading powers, λ4\lambda^4 at four legs, λ6\lambda^6 at five and λ8\lambda^8 at six. Contributions that require light-fermion Yukawa couplings need a restriction card that retains those couplings, as explained in § 4.4.

  • Adding the SM and squared contribution. Repeat the generation with NP=0 and the output name ww_sm for the SM reference. Use NP<=2 NP^2==4 and ww_cls14_sq for the squared single-insertion term. Apply the same parameters and run settings to each output directory before generating events. The stored benchmark gives approximately 68.4 pb for the SM and 0.022 pb for the square, corresponding to δ=−4.3×10−4\delta=-4.3 \times10^{-4} and R=0.74R=0.74 in Table 4.

  • Automated studies and distributions. The study driver can run the SM, interference and square together and retain the records used by the plotting scripts. A small study of the same class is configured by

mkdir -p ww_study
printf "p p > w+ w-\n" > ww_study/processes.txt
printf "cls14\n" > ww_study/classes.txt
DIM8_ORDERS=NP=0 examples/studies/run_study.sh \
    ww_study models/dim8_mw 100000

The process list can contain several final states and their cuts, and the class list can contain several restriction cards. The driver saves the rates and recorded samples needed by the plotting tools, following the procedure in Section D. The plotting tools retain signed interference weights and report statistical uncertainties for mass bins, upper mass cuts and the ratio RR. Bin uncertainties combine fluctuations in the weighted bin fraction with the integration error, retaining the correlation between the bin and the total event weight. The SM, interference and square are generated in separate runs and their errors are propagated independently. Plotting requires Matplotlib. The distribution study supplied with the repository gives the commands used for the figures in this paper.

Fixed-order extraction in the {α,MZ,GF}\{\alpha, M_Z, G_F\} scheme

The extraction follows § 4.2. We hold the Wilson coefficients fixed, evaluate X(t)X(t) at several values of Λ\Lambda, and fit the coefficients of its expansion in t=1/Λ2t = 1/\Lambda^2. The default scales, Λ=2\Lambda= 2, 3 and 4 TeV, are suitable for the produced-WW and off-shell benchmarks studied here. Changing the fitted scales tests the sensitivity to higher-order terms. Near a resolved WW resonance, larger scales are needed to keep the shift in MW2M_W^2 small compared with MWΓWM_W\Gamma_W.

Within each scan, the runs use a common random seed. Repeating the scan with independent seeds gives an estimate of the statistical uncertainty from their spread. A scan is included in the fit only when all required runs are present. We compare the extracted coefficients with an independent fixed-order expansion for uˉd→e+νe\bar{u}d \to e^+\nu_e and pp→W+W−pp \to W^+W^-, as described in § 6.

Comparisons with other implementations

For the comparison with SMEFTFR, we load its dimension-eight operators into our FeynRules model. Both implementations then use the same fields, covariant derivative and unitary gauge. This tests the operator definitions in a common convention. We evaluate vertices of the difference at random momenta satisfying momentum conservation, with Levi-Civita tensors expanded explicitly. Expressions containing dual field strengths can cancel through momentum conservation and the Schouten identity. The operators in XH4D2XH^4D^2 also require the relative factor of ii discussed in § 3, since SMEFTFR implements the forms printed in the Murphy basis.

For the dimension-six comparison, we use the U(3)5U(3)^5 UFO models of SMEFTsim version 3.0.2 and its default inputs. We set the CKM matrix to the identity so that the different CKM parameterizations coincide. For each coefficient, symmetric finite differences extract the derivative of every coupling at zero coefficient, cancelling quadratic and cubic terms. The two implementations can decompose a vertex differently into Lorentz structures, colour tensors and Dirac projectors. We therefore compare fully contracted vertices at common random momenta, colour vectors, polarization vectors and spinors.

The released validation tools also run the Lorentz and CP tests described in § 6. Separate audits check the EFT order assigned to each coefficient-dependent coupling and the mass dimension of every dimension-eight vertex. These checks complement the comparisons with independent implementations.

Vanishing structures

The exported interactions can contain Lorentz structures that cancel identically but remain unsimplified in the FeynRules output. Such structures can cause ALOHA to generate routines that fail to compile. We identify candidates for removal by evaluating them at generic momenta satisfying momentum conservation, with generic wavefunctions. This distinguishes cancellations of the structure itself from zeros that require particular on-shell external states. For four-fermion vertices, the contractions include the relative signs assigned by MadGraph5_aMC@NLO to crossed fermion pairings.

Cancellations can also involve several structures or vertices. We group structures with common external particles by their couplings and test their signed sums. The tests use generic parameter values, including nonzero light-fermion Yukawa couplings, and compare the summed vertices before and after removal at common numerical points. These comparisons provide numerical checks that the retained interactions reproduce the original export.

Some zeros have a direct physical interpretation. The vacuum part of (H†H)2XX~(H^\dagger H)^2 X\widetilde{X} is a theta term, so its three-boson interaction without an external Higgs boson vanishes as a total derivative. The four-gluon vacuum interaction of QG2H4(1)Q_{G^2H^4}^{(1)} instead cancels the correction generated by gluon-field normalization, as required by the input treatment in § 4.2.

The leading flavour structures of thirteen operators vanish. Twelve belong to the four-fermion field-strength families l4Bl^4B, q4Bq^4B, e4Be^4B, u4Bu^4B and d4Bd^4B. With identical flavour contractions, the product of the two currents is symmetric in the Lorentz indices contracted with the antisymmetric field strength. The thirteenth is Qq4H2(5)Q_{q^4H^2}^{(5)}, whose ϵIJK\epsilon^{IJK} contracts two identical triplet currents. Additional MFV structures distinguish the currents and give nonzero vertices for all thirteen operators except Qe4B(2)Q_{e^4B}^{(2)}, which has no vertex within the implemented flavour expansion.

Operator dictionary

The accompanying machine-readable operator dictionary lists each coefficient name, its contribution to the Lagrangian and its CP assignment. It is generated from the same operator definitions as the model parameter cards and is also supplied in \LaTeX{} form. Each basis contains 734 entries, including the 674 baryon-number-conserving operators used in the models. The combined source contains 749 because it includes both sets of fifteen operators in ψ2H2D3\psi^2H^2D^3. The dictionary also identifies the thirteen operators whose leading flavour structure vanishes and records the reason.

Energy counting for representative processes

We apply the counting rules of § 5.3 to four representative processes. The expansions show how different interactions can produce energy growth relative to the SM. They use the default geometric basis and the {MW,MZ,GF}\{M_W, M_Z, G_F\} input scheme, with both dimension-six and dimension-eight operators.

We write cXc_X for a generic Wilson coefficient in class XX. The factors Λ^−2\hat{\Lambda}^{-2} and Λ^−4\hat{\Lambda}^{-4} label the operator dimension, with the physical suppression by Λ\Lambda already included in the powers of λ\lambda. The displayed expressions contain one EFT insertion. Numerical factors, Lorentz structures, universal input-parameter shifts and terms with two dimension-six insertions are not written separately. We set the light-fermion Yukawa couplings to zero and omit external fermion chiralities with no SM counterpart.

These are schematic expansions of allowed contributions. Gauge cancellations and helicity selection can remove a leading term from an amplitude or its interference. Terms with relative counting E4/Λ4E^{4}/\Lambda^{4} are highlighted in bold. Unless stated otherwise, external vector bosons are transverse.

qqˉ→W+W−q\bar{q}\to W^{+}W^{-}

After unpacking the combined model, the command ./dim8 series "u u > w+ w-" gives the expansion. For transverse WW bosons, the SM contributes through ss-channel and tt-channel exchange, while the SMEFT also supplies a contact interaction:

As=λ0gqqVgVVV+λ2gqqVcX3/Λ^2+λ4(gqqVcX2H2+gVVVcψ2H2D)/Λ^2+λ6gqqVcX3H2/Λ^4+λ8[gqqV(cX2H4+cXH4D2)+gVVVcψ2H4D]/Λ^4,At=λ0gqqV2+λ4gqqVcψ2H2D/Λ^2+λ8gqqVcψ2H4D/Λ^4,Ac=λ4cψ2X2D/Λ^4+λ6(cψ2XH2D+cψ2H2D3)/Λ^4.(23)\begin{aligned} \mathcal{A}_{s}={}&\lambda^{0}g_{qqV}g_{VVV}+\lambda^{2}g_{qqV}c_{X^{3}}/\hat{\Lambda}^{2}+\lambda^{4}(g_{qqV}c_{X^{2}H^{2}}+g_{VVV}c_{\psi^{2}H^{2}D})/\hat{\Lambda}^{2}\\ &+\lambda^{6}g_{qqV}c_{X^{3}H^{2}}/\hat{\Lambda}^{4}+\lambda^{8}[g_{qqV}(c_{X^{2}H^{4}}+c_{XH^{4}D^{2}})+g_{VVV}c_{\psi^{2}H^{4}D}]/\hat{\Lambda}^{4},\\ \mathcal{A}_{t}={}&\lambda^{0}g_{qqV}^{2}+\lambda^{4}g_{qqV}c_{\psi^{2}H^{2}D}/\hat{\Lambda}^{2}+\lambda^{8}g_{qqV}c_{\psi^{2}H^{4}D}/\hat{\Lambda}^{4},\\ \mathcal{A}_{c}={}&\lambda^{4}c_{\psi^{2}X^{2}D}/\hat{\Lambda}^{4}+\lambda^{6}(c_{\psi^{2}XH^{2}D}+c_{\psi^{2}H^{2}D^{3}})/\hat{\Lambda}^{4}. \tag*{(23)} \end{aligned}

The unsuppressed SM amplitude is of order λ0\lambda^{0}. At dimension six, the X3X^{3} term at λ2\lambda^{2} therefore grows as E2/Λ2E^{2}/\Lambda^{2}, while the terms at λ4\lambda^{4} scale as v2/Λ2v^{2}/\Lambda^{2}. At dimension eight, the strongest growth comes from the ψ2X2D\psi^{2}X^{2}D contact interaction at λ4\lambda^{4}, highlighted in bold. It scales as E4/Λ4E^{4}/\Lambda^{4} and requires no additional SM vertex. The contact terms at λ6\lambda^{6} scale as E2v2/Λ4E^{2}v^{2}/\Lambda^{4}, while the terms at λ8\lambda^{8} have no energy enhancement.

These powers describe the amplitudes. Their interference with the SM also depends on helicity. In particular, the leading transverse amplitudes generated by X3X^{3} do not interfere with the SM in the massless limit, so their amplitude growth does not directly translate into the same enhancement of the interference [83].

For WLWLW_{L}W_{L}, the full SM amplitude remains of order λ0\lambda^{0} after the gauge cancellations. The Higgs-current class ψ2H2D\psi^{2}H^{2}D now contributes at λ2\lambda^{2}, giving E2/Λ2E^{2}/\Lambda^{2} growth. At dimension eight, ψ2H2D3\psi^{2}H^{2}D^{3} contributes at λ4\lambda^{4}, giving E4/Λ4E^{4}/\Lambda^{4} growth. The classes ψ2H4D\psi^{2}H^{4}D and XH4D2XH^{4}D^{2} contribute at λ6\lambda^{6}, corresponding to E2v2/Λ4E^{2}v^{2}/\Lambda^{4}. Thus the leading dimension-eight growth comes from different classes in the transverse and longitudinal channels. Resolving the polarization can help distinguish the interactions responsible for a high-energy deviation.

The assignment to individual classes follows the chosen operator basis. In the default basis, ψ2XH2D\psi^{2}XH^{2}D and ψ2H2D3\psi^{2}H^{2}D^{3} have no three-point vertices and contribute to the transverse amplitude only through their contact terms. The Murphy basis gives a different distribution between contact and exchange contributions.5

qqˉ→e+e−q\bar{q}\to e^{+}e^{-}

The SM contributes through neutral-boson exchange, while four-fermion operators also give a contact interaction:

As=λ0gqqVgeeV+λ4(gqqV+geeV)cψ2H2D/Λ^2+λ8(gqqV+geeV)cψ2H4D/Λ^4,Ac=λ2cψ4/Λ^2+λ4cψ4D2/Λ^4+λ6cψ4H2/Λ^4.(24)\begin{aligned} \mathcal{A}_{s}&=\lambda^{0}g_{qqV}g_{eeV}+\lambda^{4}(g_{qqV}+g_{eeV})c_{\psi^{2}H^{2}D}/\hat{\Lambda}^{2}+\lambda^{8}(g_{qqV}+g_{eeV})c_{\psi^{2}H^{4}D}/\hat{\Lambda}^{4},\\ \mathcal{A}_{c}&=\lambda^{2}c_{\psi^{4}}/\hat{\Lambda}^{2}+\lambda^{4}c_{\psi^{4}D^{2}}/\hat{\Lambda}^{4}+\lambda^{6}c_{\psi^{4}H^{2}}/\hat{\Lambda}^{4}. \tag*{(24)} \end{aligned}

The leading contact contributions scale as E2/Λ2E^2/\Lambda^2 for ψ4\psi^4 and E4/Λ4E^4/\Lambda^4 for ψ4D2\psi^4D^2. The two derivatives in the latter supply the additional powers of energy. In ψ4H2\psi^4H^2, replacing the Higgs fields by their vacuum values instead gives E2v2/Λ4E^2v^2/\Lambda^4. The displayed current-operator terms shift the neutral-current couplings without energy enhancement. The class ψ2H2D3\psi^2H^2D^3 is absent because it has no three-point vertex in the default basis.

qq′→qq′HHqq' \to qq'HH

Higgs-pair production with two jets illustrates how additional external particles expose interactions with fewer vacuum insertions. For example, ψ4H2\psi^4H^2 gives E2v2/Λ4E^2v^2/\Lambda^4 in a four-fermion amplitude, but its six-point contact interaction contributes at relative order E4/Λ4E^4/\Lambda^4 in this process.

We separate contributions with a bosonic VV→HHVV \to HH core from those involving EFT interactions on the quark lines or a six-point contact. Two SM quark currents and two propagators dress the core with λ−4λ8=λ4\lambda^{-4}\lambda^8 = \lambda^4. We first consider transverse vectors in the core. To keep the expansion compact, let CXC_X denote the relevant linear combinations of coefficients in class XX, including their SM coupling factors. With aSMcorea_{\mathrm{SM}}^{\mathrm{core}} denoting the coefficient of the leading SM power, representative terms are

Acore∼λ4[aSMcore+λ2CX2H2Λ^2+λ4(CH4D2Λ^2+CX2H2D2Λ^4)+λ6Λ^4(CH4D4+CX2H4+CXH4D2)+λ8CH6D2Λ^4+⋯ ],\mathcal{A}_{\mathrm{core}} \sim\lambda^4 \left[ a_{\mathrm{SM}}^{\mathrm{core}} + \lambda^2 \frac{C_{X^2H^2}}{\widehat{\Lambda}^2} + \lambda^4 \left( \frac{C_{H^4D^2}}{\widehat{\Lambda}^2} + \frac{\mathbf{C}_{X^2H^2D^2}}{\widehat{\Lambda}^4} \right) + \frac{\lambda^6}{\widehat{\Lambda}^4} \left( C_{H^4D^4} + C_{X^2H^4} + C_{XH^4D^2} \right) + \lambda^8 \frac{C_{H^6D^2}}{\widehat{\Lambda}^4} + \cdots\right],
Aline∼λ6Cψ2H2DΛ^2+λ8Λ^4(Cψ2H2D3+Cψ2XH2D+Cψ4H2)+λ10Cψ2H4DΛ^4+⋯ .(25)\mathcal{A}_{\mathrm{line}} \sim\lambda^6 \frac{C_{\psi^2H^2D}}{\widehat{\Lambda}^2} + \frac{\lambda^8}{\widehat{\Lambda}^4} \left( C_{\psi^2H^2D^3} + C_{\psi^2XH^2D} + C_{\psi^4H^2} \right) + \lambda^{10} \frac{C_{\psi^2H^4D}}{\widehat{\Lambda}^4} + \cdots. \tag*{(25)}

The SM core includes both the VVHHVVHH contact interaction and exchange diagrams. In Feynman gauge, the latter include Goldstone exchange at the leading power. The displayed core therefore represents their combined counting, rather than a contact interaction alone. Subleading terms include Higgs exchange and contributions from the potential classes H6H^6 and H8H^8.

The core class X2H2X^2H^2 and the quark-current class ψ2H2D\psi^2H^2D both give relative E2/Λ2E^2/\Lambda^2 growth. At dimension eight, the four classes highlighted in bold give relative E4/Λ4E^4/\Lambda^4 growth. Three involve the external quark lines, including the six-point interaction of ψ4H2\psi^4H^2.

The longitudinal channel supplies additional energy-enhanced contributions. Here a polarization assignment refers to the on-shell VV→HHVV \to HH core in the effective-vector-boson approximation. Applying the equivalence theorem to this core places H4D2H^4D^2 at λ2\lambda^2, H4D4H^4D^4 at λ4\lambda^4 and H6D2H^6D^2 at λ6\lambda^6, before the quark-current dressing. Thus H4D4H^4D^4 can produce relative E4/Λ4E^4/\Lambda^4 growth through longitudinal bosons, while X2H2D2X^2H^2D^2 supplies this growth in the transverse channel. The counting identifies these mechanisms without assuming that the unpolarized sample is dominated by longitudinal bosons.

uˉd→W+W−W+\bar{u}d \to W^{+}W^{-}W^{+}

The SM amplitude begins at λ2\lambda^{2}. Its leading topologies include successive gauge-boson emissions from the quark line, diagrams with triple-gauge vertices, and a quartic-gauge vertex connected to the quark current. Using CXC_X as above to include the topology-dependent SM coupling factors, the leading class powers are

A∼λ2aSM+λ4CX3Λ^2+λ6[CX2H2+Cψ2H2DΛ^2+CX4+Cψ2X2DΛ^4]+λ8Λ^4(CX3H2+CX2H2D2+Cψ2H2D3+Cψ2XH2D)+λ10Λ^4(CH4D4+CX2H4+CXH4D2+Cψ2H4D)+⋯(26)\mathcal{A} \sim\lambda^{2}a_{\mathrm{SM}}+\lambda^{4}\frac{C_{X^{3}}}{\hat{\Lambda}^{2}}+\lambda^{6}\left[\frac{C_{X^{2}H^{2}}+C_{\psi^{2}H^{2}D}}{\hat{\Lambda}^{2}}+\frac{C_{X^{4}}+C_{\psi^{2}X^{2}D}}{\hat{\Lambda}^{4}}\right] +\frac{\lambda^{8}}{\hat{\Lambda}^{4}}\left(C_{X^{3}H^{2}}+C_{X^{2}H^{2}D^{2}}+C_{\psi^{2}H^{2}D^{3}}+C_{\psi^{2}XH^{2}D}\right) +\frac{\lambda^{10}}{\hat{\Lambda}^{4}}\left(C_{H^{4}D^{4}}+C_{X^{2}H^{4}}+C_{XH^{4}D^{2}}+C_{\psi^{2}H^{4}D}\right)+\cdots \tag*{(26)}

where aSMa_{\mathrm{SM}} is the coefficient of the leading SM power. The quark-current factors in CXC_X include the charged-current flavour structure appropriate to the incoming udˉu\bar{d} state.

The dimension-six class X3X^{3} gives relative E2/Λ2E^{2}/\Lambda^{2} growth. The classes X2H2X^{2}H^{2} and ψ2H2D\psi^{2}H^{2}D enter at λ6\lambda^{6} and have no corresponding energy enhancement. At dimension eight, X4X^{4} and ψ2X2D\psi^{2}X^{2}D lead at relative order E4/Λ4E^{4}/\Lambda^{4}. The former contributes through a four-boson interaction, while the latter contributes through qqˉWWq\bar{q}WW interactions and five-point contact terms. The additional final-state boson allows X4X^{4} to interfere with the SM at tree level in quark annihilation. In diboson production its gluonic contact contribution instead has no tree-level SM counterpart. Longitudinal polarizations require the separate counting described in Section C.1.

Complete numerical results

Table 6 gives the dimension-eight interference for all 21 operator classes in the twelve processes of § 7. The entries are the signed quantity δ\delta of Equation (20), in units of 10−410^{-4}. Four columns appear in Table 4. All results use 13.6 TeV proton collisions, Λ=3\Lambda= 3 TeV and unit coefficients within one class at a time, with the flavour and input choices of § 7.

The Drell–Yan samples require mee>200m_{ee} > 200 GeV, pTℓ>10p_{T}^{\ell} > 10 GeV, ∣ηℓ∣<2.5|\eta_{\ell}| < 2.5 and ΔR(ℓ,ℓ)>0.4\Delta R(\ell,\ell) > 0.4. The photon channel additionally requires pTγ>20p_{T}^{\gamma} > 20 GeV, ∣ηγ∣<2.5|\eta_{\gamma}| < 2.5 and ΔR(γ,ℓ)>0.4\Delta R(\gamma,\ell) > 0.4. The electroweak HHjjHHjj sample is generated with QCD=0, pTj>25p_{T}^{j} > 25 GeV, ∣ηj∣<5|\eta_{j}| < 5, mjj>400m_{jj} > 400 GeV and ΔR(j,j)>0.4\Delta R(j,j) > 0.4. No kinematic cuts are applied to the diboson or triboson samples.

The accompanying study results provide absolute cross sections, Monte Carlo integration errors, squared contributions and the WW mass used in each run. MadGraph5_aMC@NLO estimates the integration error from the absolute values of the event weights, which under-states the error of an interference, whose weights take both signs. For Table 4 and Table 6 we instead take the integration error and the error of the mean of the signed event weights added in quadrature, an upper bound on the error. The run records identify the model version, generator version, restriction card, parameter and run cards, and event sample. The table and figure scripts check these records and their consistency with the released model before using the results. The study driver retains the generated event files. Separate per-operator results for pp→W+W−pp \to W^{+}W^{-} cover the 95 operators with a vertex in the process and the six entering through the input relations alone.

References

  1. [1]W. Buchmuller and D. Wyler, Effective Lagrangian Analysis of New Interactions and Flavor Conservation, Nucl. Phys. B 268 (1986) 621.
  2. [2]I. Brivio and M. Trott, The Standard Model as an Effective Field Theory, Phys. Rept. 793 (2019) 1 [1706.08945].DOI
  3. [3]B. Grzadkowski, M. Iskrzynski, M. Misiak and J. Rosiek, Dimension-Six Terms in the Standard Model Lagrangian, JHEP 10 (2010) 085 [1008.4884].DOI
  4. [4]N. D. Christensen and C. Duhr, FeynRules - Feynman rules made easy, Comput. Phys. Commun. 180 (2009) 1614 [0806.4194].DOI
  5. [5]A. Alloul, N. D. Christensen, C. Degrande, C. Duhr and B. Fuks, FeynRules 2.0 - A complete toolbox for tree-level phenomenology, Comput. Phys. Commun. 185 (2014) 2250 [1310.1921].
  6. [6]C. Degrande, C. Duhr, B. Fuks, D. Grellscheid, O. Mattelaer and T. Reiter, UFO - The Universal FeynRules Output, Comput. Phys. Commun. 183 (2012) 1201 [1108.2040].DOI
  7. [7]L. Darmé et al., UFO 2.0: the ‘Universal Feynman Output’ format, Eur. Phys. J. C 83 (2023) 631 [2304.09883].
  8. [8]I. Brivio, Y. Jiang and M. Trott, The SMEFTsim package, theory and tools, JHEP 12 (2017) 070 [1709.06492].DOI
  9. [9]I. Brivio, SMEFTsim 3.0 — a practical guide, JHEP 04 (2021) 073 [2012.11343].DOI
  10. [10]C. Degrande, G. Durieux, F. Maltoni, K. Mimasu, E. Vryonidou and C. Zhang, Automated one-loop computations in the standard model effective field theory, Phys. Rev. D 103 (2021) 096024 [2008.11743].DOI
  11. [11]J. Allwall, R. Frederix, S. Frixione, V. Hirschi, F. Maltoni, O. Mattelaer et al., The automated computation of tree-level and next-to-leading order differential cross sections, and their matching to parton shower simulations, JHEP 07 (2014) 079 [1405.0301].
  12. [12]A. Adams, N. Arkani-Hamed, S. Dubovsky, A. Nicolis and R. Rattazzi, Causality, analyticity and an IR obstruction to UV completion, JHEP 10 (2006) 014 [hep-th/0602178].DOI
  13. [13]G. N. Remmen and N. L. Rodd, Consistency of the Standard Model Effective Field Theory, JHEP 12 (2019) 032 [1908.09845].DOI
  14. [14]C. Zhang and S.-Y. Zhou, Positivity bounds on vector boson scattering at the LHC, Phys. Rev. D 100 (2019) 095003 [1808.00010].DOI
  15. [15]Q. Bi, C. Zhang and S.-Y. Zhou, Positivity constraints on aQGC: carving out the physical parameter space, JHEP 06 (2019) 137 [1902.08977].DOI
  16. [16]G. N. Remmen and N. L. Rodd, Flavor Constraints from Unitarity and Analyticity, Phys. Rev. Lett. 125 (2020) 081601 [2004.02885].DOI
  17. [17]C. Zhang, SMEFTs living on the edge: determining the UV theories from positivity and extremality, JHEP 12 (2022) 096 [2112.11665].DOI
  18. [18]C. Hays, A. Martin, V. Sanz and J. Setford, On the impact of dimension-eight SMEFT operators on Higgs measurements, JHEP 02 (2019) 123 [1808.00442].DOI
  19. [19]T. Corbett, A. Martin and M. Trott, Consistent higher order σ (𝒢𝒢 → h), Γ(h → 𝒢𝒢) and Γ(h → γγ) in geoSMEFT, JHEP 12 (2021) 147 [2107.07470].
  20. [20]A. Martin and M. Trott, ggh variations, Phys. Rev. D 105 (2022) 076004 [2109.05595].DOI
  21. [21]A. Martin and M. Trott, More accurate σ (𝒢𝒢 → h), Γ(h → 𝒢𝒢, 𝒜𝒜, Ψ̄Ψ) and Higgs width results via the geoSMEFT, JHEP 01 (2024) 170 [2305.05879].
  22. [22]T. Corbett and A. Martin, Higgs associated production with a vector decaying to two fermions in the geoSMEFT, SciPost Phys. 16 (2024) 019 [2306.00053].arxiv.org/abs/2306.00053
  23. [23]B. Assi and A. Martin, Energy-enhanced dimension eight SMEFT effects in VBF Higgs production, JHEP 02 (2025) 029 [2410.21563].arxiv.org/abs/2410.21563
  24. [24]S. Dawson, S. Homiller and M. Sullivan, Impact of dimension-eight SMEFT contributions: A case study, Phys. Rev. D 104 (2021) 115013 [2110.06929].DOI
  25. [25]J. Ellis, K. Mimasu and F. Zampedri, Dimension-8 SMEFT analysis of minimal scalar field extensions of the Standard Model, JHEP 10 (2023) 051 [2304.06663].arxiv.org/abs/2304.06663
  26. [26]T. Corbett, A. Helset, A. Martin and M. Trott, EWPD in the SMEFT to dimension eight, JHEP 06 (2021) 076 [2102.02819].DOI
  27. [27]T. Corbett, J. Desai, O. J. P. Éboli, M. C. Gonzalez-Garcia, M. Martines and P. Reimitz, Impact of dimension-eight SMEFT operators in the electroweak precision observables and triple gauge couplings analysis in universal SMEFT, Phys. Rev. D 107 (2023) 115013 [2304.03305].DOI
  28. [28]S. Alioli, R. Boughezal, E. Mereghetti and F. Petriello, Novel angular dependence in Drell-Yan lepton production via dimension-8 operators, Phys. Lett. B 809 (2020) 135703 [2003.11615].DOI
  29. [29]R. Boughezal, E. Mereghetti and F. Petriello, Dilepton production in the SMEFT at O(1/Λ⁴), Phys. Rev. D 104 (2021) 095022 [2106.05337].DOI
  30. [30]R. Boughezal, Y. Huang and F. Petriello, Exploring the SMEFT at dimension eight with Drell-Yan transverse momentum measurements, Phys. Rev. D 106 (2022) 036020 [2207.01703].DOI
  31. [31]T. Kim and A. Martin, Monolepton production in SMEFT to O(1/Λ⁴) and beyond, JHEP 09 (2022) 124 [2203.11976].DOI
  32. [32]C. Degrande and H.-L. Li, Impact of dimension-8 SMEFT operators on diboson productions, JHEP 06 (2023) 149 [2303.10493].DOI
  33. [33]A. Martin, A case study of SMEFT O(1/Λ⁴) effects in diboson processes: pp → W±(ℓ±ν)γ, JHEP 05 (2024) 223 [2312.09867].DOI
  34. [34]J. Ellis and S.-F. Ge, Constraining Gluonic Quartic Gauge Coupling Operators with gg → γγ, Phys. Rev. Lett. 121 (2018) 041801 [1802.02416].DOI
  35. [35]H.-L. Li, Z. Ren, J. Shu, M.-L. Xiao, J.-H. Yu and Y.-H. Zheng, Complete set of dimension-eight operators in the standard model effective field theory, Phys. Rev. D 104 (2021) 015026 [2005.00008].DOI
  36. [36]C. W. Murphy, Dimension-8 operators in the Standard Model Effective Field Theory, JHEP 10 (2020) 174 [2005.00059].DOI
  37. [37]B. Henning, X. Lu, T. Melia and H. Murayama, 2, 84, 30, 993, 560, 15456, 11962, 261485, ...: Higher dimension operators in the SM EFT, JHEP 08 (2017) 016 [1512.03433].
  38. [38]C. B. Marinissen, R. Rahn and W. J. Waalewijn, ..., 83106786, 114382724, 1509048322, 2343463290, 27410087742, ... efficient Hilbert series for effective theories, Phys. Lett. B 808 (2020) 135632 [2004.09521].
  39. [39]L. Lehman and A. Martin, Low-derivative operators of the Standard Model effective field theory via Hilbert series methods, JHEP 02 (2016) 081 [1510.00372].DOI
  40. [40]J. C. Criado, BasisGen: automatic generation of operator bases, Eur. Phys. J. C 79 (2019) 256 [1901.03501].DOI
  41. [41]R. M. Fonseca, The Sym2Int program: going from symmetries to interactions, J. Phys. Conf. Ser. 873 (2017) 012045 [1703.05221].DOI
  42. [42]R. V. Harlander and M. C. Schaaf, AutoEFT: Automated operator construction for effective field theories, Comput. Phys. Commun. 300 (2024) 109198 [2309.15783].
  43. [43]M. Chala, Á. Díaz-Carmona and G. Guedes, A Green’s basis for the bosonic SMEFT to dimension 8, JHEP 05 (2022) 138 [2112.12724].DOI
  44. [44]M. Chala, G. Guedes, M. Ramos and J. Santiago, Towards the renormalisation of the Standard Model effective field theory to dimension eight: Bosonic interactions I, SciPost Phys. 11 (2021) 065 [2106.05291].DOI
  45. [45]S. Das Bakshi, M. Chala, Á. Díaz-Carmona and G. Guedes, Towards the renormalisation of the Standard Model effective field theory to dimension eight: bosonic interactions II, Eur. Phys. J. Plus 137 (2022) 973 [2205.03301].arxiv.org/abs/2205.03301
  46. [46]R. Boughezal, Y. Huang and F. Petriello, Renormalization-group running of dimension-8 four-fermion operators in the SMEFT, Phys. Rev. D 110 (2024) 116015 [2408.15378].
  47. [47]S. Das Bakshi, M. Chala and Z. Ren, Renormalization of the SMEFT to dimension eight: Fermionic interactions II, JHEP 10 (2026) 211 [2606.19202].arxiv.org/abs/2606.19202
  48. [48]J. Fuentes-Martín, M. König, J. Pagès, A. E. Thomsen and F. Wilsch, A proof of concept for matchete: an automated tool for matching effective theories, Eur. Phys. J. C 83 (2023) 662 [2212.04510].
  49. [49]A. Dedes, J. Rosiek, M. Ryczkowski, K. Suxho and L. Trifillis, SmeftFR v3 – Feynman rules generator for the Standard Model Effective Field Theory, Comput. Phys. Commun. 294 (2024) 108943 [2302.01353].DOI
  50. [50]A. Dedes, M. Paraskevas, J. Rosiek, K. Suxho and L. Trifillis, SmeftFR – Feynman rules generator for the Standard Model Effective Field Theory, Comput. Phys. Commun. 247 (2020) 106931 [1904.03204].DOI
  51. [51]O. J. P. Eboli, M. C. Gonzalez-Garcia and J. K. Mizukoshi, pp → jje±μ±νν and jje±μ∓νν at O(α⁶_em) and O(α⁴_emα²_s) for the study of the quartic electroweak gauge boson vertex at CERN LHC, Phys. Rev. D 74 (2006) 073005 [hep-ph/0606118].
  52. [52]O. J. P. Éboli and M. C. Gonzalez-Garcia, Classifying the bosonic quartic couplings, Phys. Rev. D 93 (2016) 093013 [1604.03555].DOI
  53. [53]G. Durieux, G. N. Remmen, N. L. Rodd, O. J. P. Éboli, M. C. Gonzalez-Garcia, D. Kondo et al., LHC EFT WG note: Basis for anomalous quartic gauge couplings, SciPost Phys. Comm. Rep. (2025) 6 [2411.02483].DOI
  54. [54]C. Degrande, A basis of dimension-eight operators for anomalous neutral triple gauge boson interactions, JHEP 02 (2014) 101 [1308.6323].DOI
  55. [55]H. El Faham, G. Ventura and E. Vryonidou, Diboson production in the SMEFT at dimension-8, JHEP 04 (2026) 050 [2511.04338].
  56. [56]L. Hourtz, T. Ketheeswaran, M. Krämer, A. E. Thomsen, P. Weber and F. Wilsch, UFO Sightings with Machete: Connecting BSM Lagrangians with Event Generators, 2609.28619.arxiv.org/abs/2609.28619
  57. [57]A. Helset, A. Martin and M. Trott, The Geometric Standard Model Effective Field Theory, JHEP 03 (2020) 163 [2001.01453].DOI
  58. [58]I. Brivio and M. Trott, Scheming in the SMEFT... and a reparameterization invariance!, JHEP 07 (2017) 148 [1701.06424].DOI
  59. [59]I. Brivio, S. Dawson, J. de Blas, G. Durieux, P. Savard, A. Denner et al., Electroweak input parameters, 2111.12515.arxiv.org/abs/2111.12515
  60. [60]C. Hays, A. Helset, A. Martin and M. Trott, Exact SMEFT formulation and expansion to O(Λ⁴/Λ⁴), JHEP 11 (2020) 087 [2007.00565].DOI
  61. [61]B. Assi and A. Martin, Energy-enhanced expansion of the standard model effective field theory, Phys. Rev. D 112 (2025) 015024 [2504.10617].arxiv.org/abs/2504.10617
  62. [62]R. Alonso, E. E. Jenkins and A. V. Manohar, A Geometric Formulation of Higgs Effective Field Theory: Measuring the Curvature of Scalar Field Space, Phys. Lett. B 754 (2016) 335 [1511.00724].DOI
  63. [63]R. Alonso, E. E. Jenkins and A. V. Manohar, Geometry of the Scalar Sector, JHEP 08 (2016) 101 [1605.03602].DOI
  64. [64]A. Helset, M. Paraskevas and M. Trott, Gauge fixing the Standard Model Effective Field Theory, Phys. Rev. Lett. 120 (2018) 25801 [1803.08001].DOI
  65. [65]M. Misiak, M. Paraskevas, J. Rosiek, K. Suxho and B. Zglinicki, Effective Field Theories in Rξ gauges, JHEP 02 (2019) 051 [1812.11513].DOI
  66. [66]T. Corbett, A. Helset and M. Trott, Ward Identities for the Standard Model Effective Field Theory, Phys. Rev. D 101 (2020) 013005 [1909.08470].DOI
  67. [67]T. Corbett and M. Trott, One loop verification of SMEFT Ward Identities, SciPost Phys. 10 (2021) 144 [2010.08451].arxiv.org/abs/2010.08451
  68. [68]T. Corbett, The Feynman rules for the SMEFT in the background field gauge, JHEP 03 (2021) 001 [2010.15852].DOI
  69. [69]M. Trott, αₛ as an input parameter in the SMEFT, 2306.14784.arxiv.org/abs/2306.14784
  70. [70]J. Talbert and M. Trott, Dirac masses and mixings in the (geo)SM(EFT) and beyond, JHEP 11 (2021) 009 [2107.03951].DOI
  71. [71]A. Helset, E. E. Jenkins and A. V. Manohar, Renormalization of the Standard Model Effective Field Theory from geometry, JHEP 02 (2023) 063 [2212.03253].DOI
  72. [72]B. Assi, A. Helset, A. V. Manohar, J. Pagès and C.-H. Shen, Fermion geometry and the renormalization of the Standard Model Effective Field Theory, JHEP 11 (2023) 201 [2307.03187].arxiv.org/abs/2307.03187
  73. [73]B. Assi, A. Helset, J. Pagès and C.-H. Shen, Renormalizing two-fermion operators in the SMEFT via supergeometry, JHEP 12 (2025) 082 [2504.18537].arxiv.org/abs/2504.18537
  74. [74]T. Cohen, N. Craig, X. Lu and D. Sutherland, Is SMEFT Enough?, JHEP 03 (2021) 237 [2008.08597].DOI
  75. [75]T. Cohen, N. Craig, X. Lu and D. Sutherland, Unitarity violation and the geometry of Higgs EFTs, JHEP 12 (2021) 003 [2108.03240].DOI
  76. [76]R. Alonso and M. West, Roads to the Standard Model, Phys. Rev. D 105 (2022) 096028 [2109.13290].DOI
  77. [77]R. Gómez-Ambrosio, F. J. Llanes-Estrada, A. Salas-Bernárdez and J. J. Sanz-Cillero, Distinguishing electroweak EFTs with WLWL→n×h, Phys. Rev. D 106 (2022) 053004 [2204.01763].
  78. [78]R. Gómez-Ambrosio, F. J. Llanes-Estrada, A. Salas-Bernárdez and J. J. Sanz-Cillero, SMEFT is falsifiable through multi-Higgs measurements (even in the absence of new light particles), Commun. Theor. Phys. 75 (2023) 095202 [2207.09848].
  79. [79]A. Salas-Bernardez, J. J. Sanz-Cillero, F. J. Llanes-Estrada and R. Gomez-Ambrosio, SMEFT as a slice of HEFT’s parameter space, EPJ Web Conf. 274 (2022) 08013 [2211.09605].
  80. [80]P. de Aquino, W. Link, F. Maltoni, O. Mattelaer and T. Stelzer, ALOHA: Automatic Libraries Of Helicity Amplitudes for Feynman Diagram Computations, Comput. Phys. Commun. 183 (2012) 2254 [1108.2041].DOI
  81. [81]Particle Data Group collaboration, Review of particle physics, Phys. Rev. D 110 (2024) 030001.
  82. [82]FCC collaboration, Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors, Eur. Phys. J. C 85 (2025) 1468 [2505.00272].
  83. [83]A. Azatov, R. Contino, C. S. Machado and F. Riva, Helicity selection rules and noninterference for BSM amplitudes, Phys. Rev. D 95 (2017) 065014 [1607.05236].DOI
  84. [84]M. S. Chanowitz and M. K. Gaillard, The TeV Physics of Strongly Interacting W’s and Z’s, Nucl. Phys. B 261 (1985) 379.DOI
  85. [85]A. Wulzer, An Equivalent Gauge and the Equivalence Theorem, Nucl. Phys. B 885 (2014) 97 [1309.6055].DOI
  86. [86]G. Cuomo, L. Vecchi and A. Wulzer, Goldstone Equivalence and High Energy Electroweak Physics, SciPost Phys. 8 (2020) 078 [1911.12366].DOI
  87. [87]NNPDF collaboration, Parton distributions with QED corrections, Nucl. Phys. B 877 (2013) 290 [1308.0598].
  88. [88]M. Trott, Methodology for theory uncertainties in the standard model effective field theory, Phys. Rev. D 104 (2021) 095023 [2106.13794].DOI
  89. [89]B. Assi, A. Martin and W. Shepherd, EFT validity and truncation uncertainty from few nuisance parameters, JHEP 11 (2026) 087 [2607.02649].
  90. [90]I. Brivio et al., Truncation, validity, uncertainties, 2201.04974.arxiv.org/abs/2201.04974
  91. [91]R. Contino, A. Falkowski, F. Goertz, C. Grojean and F. Riva, On the Validity of the Effective Field Theory Approach to SM Precision Tests, JHEP 07 (2016) 144 [1604.06444].
  92. [92]D. Gillies, A. Banfi, A. Martin and M. A. Lim, Dimension-8 operators in W⁺W⁻ production via gluon fusion, JHEP 06 (2025) 111 [2412.16020].arxiv.org/abs/2412.16020
  93. [93]D. Gillies, A. Banfi and A. Martin, Probing EFT breakdown in the tails of W⁺W⁻ observables, Eur. Phys. J. C 86 (2026) 1084 [2601.19495].arxiv.org/abs/2601.19495

Paper details

vlnc:W_rm6yjf7b
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Fable 5.1 (bare)

View statement
Looking for related papers…
Contents