WorksPhysics and Astronomy
Disentangling Spin and Orbital Contributions in the Search for Altermagnetic Terahertz Conversion in RuO2
Abstract
Rutile RuO2 has emerged as a prominent candidate altermagnet, yet the microscopic origin of its reported charge-angular-momentum conversion remains unsettled. Recent theoretical and experimental advances have highlighted a potentially dominant role of orbital transport, raising a fundamental ambiguity between spin- and orbital-mediated conversion in RuO2. Here, we report the first experimental disentanglement of the spin- and orbital-to-charge conversion channels in RuO2 heterostructures using terahertz emission spectroscopy. We identify Fe as a predominantly spin-current injector, whereas Ni and permalloy predominantly inject orbital currents, revealing a substantial orbital contribution to ultrafast terahertz emission. Under controlled spin-current injection, we find no evidence for inverse altermagnetic spin-splitting effect. Instead, the observed anisotropy is consistent with an anisotropic inverse spin Hall response that is strongly conditioned by the near-interface environment. Under orbital-current injection, the anisotropy is markedly weaker, indicating that orbital-to-charge conversion is largely isotropic in RuO2. Our results establish orbital transport and interface-conditioned spin Hall conversion as key to terahertz emission from RuO2, underscoring the need to disentangle spin, orbital, and interfacial contributions before assigning anisotropy to altermagnetism.
Introduction
Rutile has become one of the most intensively studied candidate altermagnets. In these collinear, compensated antiferromagnets, crystal symmetry permits momentum-dependent spin splitting, allowing ferromagnetic-like spin polarization to coexist with zero net magnetization [1, 2, 3, 4, 5]. A key transport consequence is the altermagnetic spin-splitting effect (ASSE), whereby a longitudinal charge current generates a transverse spin-polarized current whose polarization is governed by the Néel vector and crystal orientation [6, 7, 8, 9]. Its reciprocal process, the inverse altermagnetic spin-splitting effect (IASSE) [10, 11, 12], converts an injected spin current into a transverse charge current, offering a potential probe of the underlying altermagnetic electronic structure. Although numerous experiments have reported signatures consistent with altermagnetism in [6, 7, 9, 10, 11, 12, 13, 14], recent transport, neutron-scattering, muon-spin-rotation, and spin- and angle-resolved photoemission measurements have challenged this interpretation, reporting no evidence for long-range antiferromagnetic order or the proposed altermagnetic band structure [15, 16, 17, 18, 19].
Recent advances have added an important orbital dimension to this debate. In the calculated altermagnetic phase of , the orbital Hall effect (OHE) is predicted to exceed the spin Hall effect by two orders of magnitude and carry the opposite sign, so that orbital-to-spin conversion can generate signals that would otherwise appear spin-Hall-like [20]. Theory further predicts a crystal-orientation dependence of orbital responses in -wave altermagnets [21]. Experimentally, recent torque measurements on (101)-oriented have provided evidence for the generation of orbital currents [22]. These findings establish orbital angular momentum as an important degree of freedom in -based transport. By Onsager reciprocity, the inverse orbital Hall effect (IOHE) should therefore provide a corresponding orbital-to-charge conversion channel under angularmomentum injection. Charge-angular-momentum interconversion in can thus no longer be interpreted within a spin-only picture.
This unresolved spin-orbital ambiguity is particularly important for spintronic terahertz emission spectroscopy (STES), which has been widely used to search for the IASSE in . In a typical STES experiment, femtosecond excitation of a ferromagnetic metal (FM) launches ultrafast spin [23, 24, 25] and orbital currents [26, 27, 28] into an adjacent layer. These currents can be converted into transverse charge currents through the inverse spin Hall effect (ISHE) and IOHE, respectively, generating broadband terahertz emission. If present, the IASSE provides an additional spin-to-charge conversion channel with a characteristic anisotropy governed by the Néel vector and the crystal orientation. Crucially, within the existing theoretical framework, the IASSE requires spin-current injection.
Early STES measurements on the |permalloy (Py) bilayers reported an anisotropic terahertz response after field annealing and attributed it to the IASSE [12]. More recent studies of the |Py and |CoFeB heterostructures, however, have suggested that the IASSE contribution is at most minor, with anisotropic ISHE, the electrically anisotropic conductivity (EAC) of [29] and substrate birefringence accounting for most of the observed angular anisotropy [30, 31]. Yet these analyses generally assumed predominantly spin-current injection and did not explicitly account for orbital-current-induced terahertz emission. It therefore remains unclear not only which angular-momentum channel dominates the terahertz emission, but also which conversion mechanism governs its angular anisotropy.
In this work, we report the first experimental disentanglement of the spin- and orbital-to-charge conversion in , establishing distinct spin- and orbital-dominant injection regimes. This separation reveals a substantial orbital contribution to ultrafast terahertz emission in Ni- and Pybased RuO heterostructures and, crucially, identifies Fe-based structures as a controlled spin-injection platform for assessing the IASSE. Under such well-defined spin-current injection, we find no evidence for the IASSE. Instead, the observed spin-current-induced anisotropy is consistent with an anisotropic inverse spin Hall response that is strongly conditioned by the near-interface environment. Under predominantly orbital-current injection, the anisotropy is markedly reduced, indicating that the dominant orbital-to-charge conversion is comparatively isotropic. These results provide a framework for identifying altermagnetic charge-angular-momentum conversion in systems where spin, orbital, and interfacial responses coexist.
Distinguishing Spin- and Orbital-Current-Induced Signals in RuO|FM
Figure 1a illustrates the experimental principle. Femtosecond excitation of the FM layer injects spin () and orbital () currents into the adjacent RuO, where they are converted into transverse charge currents through the ISHE and IOHE, respectively, generating terahertz emission. The two contributions are distinguished by complementary polarity and thickness signatures. Because the spin and orbital Hall conductivities of RuO are predicted to have opposite signs [20], they produce opposite emission polarities, whereas their distinct transport lengths give rise to different dependences on the RuO thickness, .

Figure 1. STES measurements of heterostructures. (a) Schematic of the experimental principle for distinguishing spin- and orbital-current contributions to the terahertz emission from heterostructures with Fe, Ni, and Py as the FM layer. The IASSE is activated only by spin-current injection into along , as schematically illustrated by the shifted Fermi surfaces. Inset: Unit cell of rutile . The , , and crystallographic directions are denoted by a, b, and c, respectively, and L indicates the Néel vector. The blue shaded plane denotes the surface. (b) Terahertz signals emitted from , , and . For clarity, the Py- and Fe-based traces are vertically offset by +400 and +800, respectively, and the Fe- and Ni-based signals are multiplied by a factor of two. The corresponding terahertz-emission polarities are indicated.
Single-crystal RuO(101) wedge films were grown on AlO(102) substrates using DC magnetron sputtering, with varying continuously across the 6-mm-long sample at a gradient of 1.33 nm mm. A uniform 3-nm-thick FM layer of Fe, Ni, or Py was subsequently deposited on the wedge to serve as the spin- or orbital-current source. These ferromagnets provide distinct injection characteristics: laser-excited Fe predominantly injects spin-polarized currents, whereas Ni generates a substantial orbital current in addition to its spin current [26, 32, 33]. For Py, which has been widely employed as a spin-source in earlier STES studies [12, 30], the dominant character of the injected current is determined experimentally below.
The -dependent terahertz emission was measured by scanning the laser spot along the wedge-gradient direction and recording the emitted terahertz fields using free-space electro-optic sampling (EOS) [34, 35]. The laser was focused to a spot in diameter, with the effective thickness resolution determined by the spot size, local thickness gradient, and translation step. This approach provides dense, high-resolution sampling of , enabling the distinct thickness dependences of the spin- and orbital-current-induced terahertz signals to be resolved [26].
As shown in Figure 1a, we define a laboratory coordinate system with the sample plane lying in the - plane and the terahertz emission along the axis. The and axes are aligned with the RuO [10] and [10\bar{1}] crystallographic directions, respectively. The Néel vector () of altermagnet RuO is expected to be oriented along [1] and therefore lies in the - plane, at an angle of with respect to the axis [36]. During measurements, an external magnetic field Oe was applied in the - plane to orient the magnetization of the FM layer, at a field angle of relative to the axis. The - and -polarized components of the emitted terahertz field, and , were selected using a terahertz polarizer before the EOS detection. Further details of the sample fabrication and experimental setup are provided in Supplementary Section S1.
In addition to the spin- and orbital-current-induced contributions, the terahertz emission from the RuO(101)|FM heterostructures contains an -independent contribution, which we denote . It originates from the deflection of photoinduced charge currents injected from the FM layer by the EAC of RuO [29] and is therefore polarized along the RuO [10\bar{1}] direction, corresponding to the axis. We separate it by recording two EOS waveforms at opposite field directions, and . Because the spin- and orbital-current-induced signals reverse sign upon reversal of , whereas remains unchanged, the antisymmetric and symmetric combinations and yield the M-dependent (MD) emission and , respectively. Details of data analysis are provided in Supplementary Section S2.
Figure 1b compares of , , and , where the number in parentheses denotes the thickness in nanometres. Remarkably, the Ni- and Py-based heterostructures share the same emission polarity, opposite to that of . This polarity contrast suggests distinct dominant angular-momentum channels: spin-current injection dominates the emission from , whereas orbital-current injection dominates that from and , as further supported by their dependences below. The terahertz polarity of is also opposite to that of , a benchmark spintronic terahertz emitter, under the same detection configuration (Supplementary Section S3), indicating an opposite sign of the effective spin Hall response in and Pt, consistent with recent studies [20].
Figures 2a-c further show the evolution of as a function of for , , and , respectively. The corresponding field amplitudes extracted at are plotted in Figure 2d-Figure 2f. For comparison, these panels also display the thickness dependence of the M-independent component, .

Figure 2. Figure 2. RuO-thickness-dependent terahertz emission of RuO|FM heterostructures. (a-c) Two-dimensional plots of magnetization-dependent (M-dependent) terahertz waveforms as a function of RuO thickness, , for RuO|Py(3), RuO|Ni(3), and RuO|Fe(3), respectively. (d) Terahertz amplitudes extracted at as a function of for RuO|Py(3). Green circles denote the M-dependent component, , and blue squares denote the M-independent EAC-induced component, . The solid line indicates the model fit. The threshold regime of is highlighted by the blue shaded region, with the threshold thickness indicated. The peak amplitude is labeled by an arrow. (e) Same as (d), but for RuO|Ni(3). (f) Same as (d), but for RuO|Fe(3). The interface-related peak amplitude is additionally indicated. Dashed lines represent the interface-related and bulk-related contributions extracted from the fitting. (g-h) Same as (d), but for RuO|Cu(2)|Py(3) and RuO|Cu(2)|Ni(3), respectively. (i) Same as (f), but for RuO|Cu(2)|Fe(3).
The clear polarity contrast persists over the entire thickness range. remains negative for both and , whereas it remains positive for . Moreover, the Ni- and Py-based heterostructures exhibit remarkably similar dependences (Figure 2d and Figure 2e), suggesting a common terahertz emission mechanism. In both cases, the terahertz amplitude rises sharply with , peaks at nm, and then gradually decreases. By contrast, displays a more complex, non-monotonic evolution characterized by two maxima (Figure 2f). The first maximum near nm is followed by a decrease and then a second maximum near nm before the signal decays at larger thicknesses.
Interestingly, the signals of all samples display a threshold-like behavior: amplitude does not increase until reaches a critical thickness . This behavior can be attributed to the fact that the EAC-induced terahertz emission can only emerge when the layer is sufficiently thick to establish anisotropic electrical conductivity. Accordingly, we use as a qualitative measure of the thickness at which the layer develops sufficiently well-defined crystalline order to support anisotropic electrical transport.
Distinguishing Bulk and Interfacial Conversion Mechanisms
The sharp rise of at small in all three heterostructures may initially suggest interfacial terahertz conversion mechanisms. Indeed, recent studies have reported an interfacial Rashba-Edelstein effect at the iron garnet (YIG) interface, which was invoked to explain the opposite signal polarity relative to [37]. To test this possibility, we inserted a 2-nm Cu spacer layer between and the FM layer. If the terahertz emission were dominated by interfacial conversion, Cu insertion would be expected to strongly suppress the signal and substantially alter its dependence.
In Figure 2g-Figure 2i, we present the and amplitudes as functions of for the heterostructures. For both and , Cu insertion does not alter the overall trend of the thickness dependence (Figure 2g, Figure 2h), indicating that the inverse orbital Rashba-Edelstein effect (IOREE) is unlikely the dominant conversion mechanism. Both series show a non-negligible terahertz emission at nm with and without Cu insertion. In the bare Ni and Py films, this background arises from the magnetic dipole emission [38, 39] and the anomalous Hall effect [40], whereas Cu(2)|Ni and Cu(2)|Py additionally contain an IOHE contribution from Cu [27]. After subtracting these backgrounds, the net peak amplitude is reduced by 30–40% upon Cu insertion, which can be attributed to the attenuation of injected orbital currents by the Cu layer. The preservation of the characteristic dependence therefore supports bulk-mediated IOHE in , rather than interfacial IOREE, as the dominant orbital-to-charge conversion mechanism.
exhibits a qualitatively different response. Although the characteristic double-peak structure persists, the low- peak, , is suppressed by >70%, whereas the high- peak, , is reduced only by ~30% (Figure 2i). The markedly different sensitivities of the two peaks to Cu insertion indicate that from comprises two distinct contributions.
The low- component, dominant below nm, is strongly sensitive to the interface. Although this behavior may initially suggest an interfacial inverse spin Rashba–Edelstein effect (ISREE) [41, 42], a model combining interfacial and bulk conversion fails to reproduce the observed double-peak structure (see below and Supplementary Section S4), arguing against ISREE as the dominant origin. Notably, the nm regime coincides with the onset region of , where the crystallinity is not yet fully developed. The first peak is therefore more plausibly associated with enhanced spin-to-charge conversion in a structurally or chemically modified near-interface region, potentially involving Ru-Fe-O intermixing.
By contrast, the high- component, dominant above nm, is attributed to bulk-mediated spin-to-charge conversion in crystalline , such as the ISHE and IASSE. Its ~30% reduction upon Cu insertion is consistent with attenuation of the injected spin current together with electrical shunting by the Cu spacer. Importantly, this bulk-mediated conversion can still be highly sensitive to the near-interface crystalline and electronic environment because the relevant ultrafast transport length is only nanometre scale (see below).
After excluding the interfacial Rashba–Edelstein conversion as the dominant emission mechanism, we model the spin- and orbital-current-induced terahertz signals using a bulk-conversion formalism established for ISHE-driven terahertz emission [24, 43]. Here, the spin and orbital channels are treated within the same theoretical framework, enabling direct quantitative comparison of the extracted parameters (e.g., diffusion lengths). The spin- and orbital-associated terahertz amplitudes are described by
where is the spin (orbital) amplitude coefficient, is the FM-layer thickness (fixed at 3 nm in this study), and is the spin (orbital) diffusion length. represents -dependent impedance, given by , where and are the refractive indices of the substrate and air, is the free-space impedance, and and are respectively the terahertz conductivities of the FM and RuO layers, determined from terahertz transmission measurements.
For RuO|Fe and RuO|Cu(2)|Fe, an additional phenomenological term is introduced to describe the low-, near-interface contribution:
where is the amplitude coefficient, is the peak thickness of the near-interface contribution, and is its width. The Gaussian form phenomenologically captures the enhanced conversion in the structurally or chemically modified near-interface regime without assigning it to a specific microscopic mechanism. In particular, an explicit ISREE-based contribution fails to reproduce the characteristic double-peak thickness dependence (Supplementary Fig. S4), further arguing against interfacial Rashba-Edelstein conversion as its dominant origin.
The fitting results, shown as solid lines in Figure 2d-Figure 2i, reproduce the amplitude as a function of for and their Cu-inserted counterparts. For and , the near-interface and bulk-mediated spin-to-charge contributions are further decomposed, as shown by the dashed lines. The fits yield spin diffusion lengths, , of ~1.18 nm for and ~1.58 nm for . In contrast, the orbital diffusion lengths () extracted from and , as well as their Cu-inserted counterparts, range from 0.21 to 0.41 nm. This substantially shorter indicates that the injected orbital angular momentum relaxes over a much shorter length scale than spin in , consistent with recent observations in heavy metals [26]. Importantly, both length scales are nanometre-scale, indicating that the bulk-mediated ISHE and IOHE signals predominantly sample a narrow region of adjacent to the interface.
For the Ni- and Py-based heterostructures, the -dependent fits include only the dominant IOHE contribution, because the weaker spin-current-induced emission is not separately resolved in the thickness-dependent signals. Nevertheless, such a residual spin contribution may become relevant to the angular anisotropy of the terahertz emission (see below).
Angular Anisotropy of Spin- and Orbital-Current-Induced Terahertz Emission in
Having disentangled the spin- and orbital-current contributions to the terahertz emission, we next examine the angular anisotropy under both spin- and orbital-dominant injection. Because the IASSE is a bulk spin-to-charge conversion process that requires spin-current injection, and in the bulk-conversion regime ( nm) provide suitable platforms for assessing the IASSE in . heterostructures, in contrast, provide a complementary platform for investigating the angular response under predominantly orbital-current injection.
In Figure 3a-Figure 3b, we present the M-dependent components of and terahertz fields as a function of the magnetic-field angle for and , respectively, with the corresponding peak-to-peak amplitudes, , indicated. Figure 3c-Figure 3e summarize the angular dependence of for , , and , respectively. Although both field components exhibit approximately sinusoidal dependence on , the signed peak amplitudes of their angular variations differ markedly among the samples. In , the peak amplitude of is larger than that of . By contrast, in , the peak amplitude of is larger than that of , corresponding to an anisotropy of opposite sign. exhibits an overall terahertz polarity opposite to that of the Fe-based heterostructures. Nevertheless, its signed anisotropy has the same sign as that of , with the signed peak amplitude of higher (less negative) than that of .

Figure 3. Angular anisotropy of terahertz emission from -based heterostructures. (a-b) and terahertz fields measured under different magnetic-field angles, , for and , respectively. The peak-to-peak amplitude, , is indicated in (a). (c-e) Peak-to-peak amplitudes for the and components for , , and , respectively. Dashed lines show fits to sinusoidal functions. (f-h) Zoom-in views of the shaded areas in (c-e), respectively, highlighting the anisotropy between the and peak amplitudes. Black and red dash-dotted lines indicate the peak amplitudes of and , respectively.
To elucidate the origin of the angular anisotropy, we resolve the measured terahertz field into components parallel () and perpendicular () to the magnetization . This transformation provides a convenient symmetry basis for separating the isotropic transverse response from additional anisotropic conversion channels. Accurate conversion from (, ) to (, ) (inset of Figure 4a), however, requires two experimental corrections. First, the birefringence of the substrate and the anisotropic terahertz conductivity of impose an amplitude anisotropy between and . For this correction, the terahertz refractive indices of and conductivities of along and were independently determined by terahertz transmission spectroscopy. Second, the magnetic anisotropy of Fe causes the magnetization angle to deviate slightly from the applied-field angle . This deviation can be calibrated by -dependent magneto-optical Kerr effect measurements, ensuring that the projected amplitudes are referenced to the actual magnetization direction. Details of these corrections are provided in Supplementary Section S5.

Figure 4. Angular anisotropy of terahertz emission from Fe- and Ni-based heterostructures. (a-c) and terahertz amplitudes as functions of the magnetization angle, , for , , and , respectively. Inset in (a): Schematic illustration of the transformation between the measured and components and the magnetization-referenced and components. Solid lines in (b) and (c) show fits to the expected angular dependence for the IASSE. (d) Terahertz amplitudes polarized along the and crystallographic directions for , plotted as functions of the Cu-layer thickness, . The dashed line indicates the signal decay expected from attenuation of the injected spin current and increased shunting effect with increasing . Inset: Schematic of the experimental geometry. (e) Anisotropy parameter as a function of for . (f-g) Same as (d) and (e), respectively, but for .
Figure 4a-Figure 4c display the corrected and amplitudes as functions of for , and , respectively. In , is nearly suppressed, whereas remains essentially independent of , indicating little intrinsic angular anisotropy after the electrodynamic corrections. The apparent - anisotropy in Figure 3c and Figure 3f therefore arises predominantly from substrate birefringence and the anisotropic terahertz conductivity of [30, 31]. By contrast, qualitatively different angular responses emerge in and (Figure 4b, Figure 4c). In both samples, exhibits a pronounced two-fold angular modulation following , whereas consists of a -independent background superimposed on a modulation.
Discussion and Conclusion
The contrasting responses of the Fe-based heterostructures reveal a pronounced sensitivity of the terahertz anisotropy to the near-interface environment of . Although shows essentially no intrinsic angular anisotropy, a pronounced anisotropy emerges after insertion of a 2-nm Cu spacer. Given the short spin diffusion length in , this contrast suggests that the anisotropic terahertz response probed by STES is strongly weighted towards the near-interface region.
To further examine this interface sensitivity, Figure 4d shows the Cu-thickness dependence of the terahertz amplitudes resolved along the two in-plane crystallographic directions of . We denote the components polarized along and as and , respectively. At small , the two components remain nearly isotropic. Their amplitudes initially increase, reaching a maximum near nm, and subsequently decrease as spin-current transmission is attenuated and electrical shunting increases. To quantify their relative difference, we define an anisotropy parameter . As shown in Figure 4e, the anisotropy begins to develop above nm and becomes nearly saturated around nm. Notably, the EAC-induced terahertz emission also exhibits a maximum around nm (Supplementary Section S6). The coincidence of these characteristic thickness scales further suggests that the anisotropic terahertz response is closely related to Cu-induced changes in the near-interface crystalline and electronic environment of .
This raises the question of whether the interface-sensitive anisotropy in could originate from the IASSE. Recent muon-spin-rotation [44] and magneto-optical Kerr effect (MOKE) measurements [45] have reported magnetic order confined to the near-surface region of thin-film , raising the possibility that altermagnetic-related responses, if present, may be enhanced or confined near the interface.
Within the theoretical description of the IASSE, a spin current injected along generates a terahertz field , where denotes the IASSE conversion efficiency, and is the unit vector along the Néel vector . In the present geometry, the components parallel and perpendicular to are given by
and
However, the injected spin current can also undergo spin-to-charge conversion through the ISHE. Owing to the crystal symmetry of , the ISHE itself can be anisotropic, yielding [19]
and
where and . Here, , , and denote the crystallographic spin Hall conductivity (SHC) tensor components, and is the angle between [1] and the (101) surface normal. Their definitions and the detailed tensor transformation are provided in Supplementary Section S7. Importantly, Eqs. (3) and (4) contain the same angular harmonics. The angular anisotropy observed in RuO(4)|Cu(2)|Fe is therefore consistent with that expected for the IASSE, but is not unique to it. An anisotropic ISHE (AISHE) can produce the same dependence.
The thickness-dependent crystallographic polarization provides an additional criterion for assessing its consistency with the IASSE. In the present geometry, the IASSE contribution is expected predominantly along the RuO [10] direction. Experimentally, however, the Cu-induced anisotropy arises mainly from the enhancement of rather than (Figure 4d). Thus, although the angular dependence in RuO(4)|Cu(2)|Fe is compatible with the IASSE, its crystallographic polarization is inconsistent with that expected for the IASSE. Together with the pronounced sensitivity to Cu insertion, this result argues against an IASSE origin and instead points to the AISHE whose anisotropy is strongly conditioned by the near-interface crystal and electronic structure of RuO.
The Ni-based heterostructures further allow us to examine, for the first time, terahertz anisotropy in RuO under predominantly orbital-current injection. Two observations are particularly informative. First, although the overall terahertz polarity of RuO|Ni is opposite to that of the Fe-based heterostructures, the phase and sign of its angular anisotropy are similar to those observed in RuO(4)|Cu(2)|Fe (Figure 4b and Figure 4c). Second, the relative anisotropy is substantially weaker in the Ni-based heterostructures. As shown in Figure 4e and Figure 4g, the absolute value of reaches as large as 0.6 in RuO(4)|Cu|Fe but remains below 0.12 in RuO(4)|Cu|Ni even for up to 4 nm. These observations indicate that the conversion channel dominating the total terahertz emission is not necessarily the one governing its angular anisotropy.
Although the relative magnitudes of the spin and orbital currents injected from Ni cannot be independently quantified, the Ni-based data nevertheless impose an important constraint on their respective conversion anisotropies. The total terahertz emission is dominated by the orbital channel, yet its anisotropy has the same phase as the spin-current-driven AISHE in the Fe-based heterostructures and is inconsistent with that expected from the orbital Hall response. If orbital-to-charge conversion possessed an anisotropy comparable to that of spin-to-charge conversion, the dominant orbital contribution would also dominate the anisotropic response. Instead, the net anisotropy follows the subdominant spin channel. This observation therefore indicates that the orbital-to-charge conversion in is substantially more isotropic than its spin counterpart.
Our first-principles calculations support this interpretation. We calculate only the even-symmetry components of the spin and orbital Hall conductivity tensors for antiferromagnetic with the Néel vector along . When the spin or orbital current is injected along with its polarization along or , the calculated orbital Hall conductivity has the opposite sign to, but a much larger magnitude than, the spin Hall conductivity [20]. Moreover, both Hall conductivities have larger magnitudes for polarization along than for polarization along . The calculated relative anisotropy is ~39% for the spin Hall response but only ~9% for the orbital Hall response (Supplementary Section S8). Because the spin- and orbital-mediated terahertz signals have opposite polarities, these tensor anisotropies lead to opposite anisotropy phases in the emitted field, consistent with the experimental discrimination between the two channels. Thus, theory and experiment consistently indicate a substantially weaker orbital than spin Hall conversion anisotropy. A quantitative separation of the two contributions and a direct determination of the orbital Hall anisotropy nevertheless remain challenging and will require independent calibration of the injected spin and orbital currents.
In conclusion, we experimentally disentangle spin- and orbital-to-charge conversion in
References
- [1]L. Yuan, Z. Wang, J. Luo, E. I. Rashba, and A. Zunger, Giant momentum-dependent spin splitting in centrosymmetric low-Z antiferromagnets, Phys. Rev. B 102, 14422 (2020).DOI
- [2]L. Šmejkal, R. González-hernández, T. Jungwirth, and J. Sinova, Crystal time-reversal symmetry breaking and spontaneous Hall effect in collinear antiferromagnets, Sci. Adv. 6, eaaz8809 (2020).DOI
- [3]I. I. Mazin, K. Koepernik, M. D. Johannes, and L. Smejkal, Prediction of unconventional magnetism in doped FeSb2, Proc. Natl. Acad. Sci. U. S. A. 118, e2108924118 (2021).DOI
- [4]S. Hayami, Y. Yanagi, and H. Kusunose, Momentum-Dependent Spin Splitting by Collinear Antiferromagnetic Ordering, J. Phys. Soc. Japan 88, 123702 (2019).DOI
- [5]Š. Libor, J. Sinova, and T. Jungwirth, Emerging Research Landscape of Altermagnetism, Phys. Rev. X 12, 040501 (2022).arxiv.org/abs/2204.10844
- [6]H. Bai et al., Observation of Spin Splitting Torque in a Collinear Antiferromagnet RuO2, Phys. Rev. Lett. 128, 197202 (2022).DOI
- [7]S. Karube, T. Tanaka, D. Sugawara, N. Kadoguchi, M. Kohda, and J. Nitta, Observation of Spin-Splitter Torque in Collinear Antiferromagnetic RuO2, Phys. Rev. Lett. 129, 137201 (2022).DOI
- [8]R. González-Hernández, L. Šmejkal, K. Výborný, Y. Yahagi, J. Sinova, T. Jungwirth, and J. Železný, Efficient Electrical Spin Splitter Based on Nonrelativistic Collinear Antiferromagnetism, Phys. Rev. Lett. 126, 127701 (2021).
- [9]A. Bose et al., Tilted spin current generated by the collinear antiferromagnet ruthenium dioxide, Nat. Electron. 5, 267 (2022).DOI
- [10]C. Liao, Y. Wang, Y. Tien, S. Huang, and D. Qu, Separation of Inverse Altermagnetic Spin- Splitting Effect from Inverse Spin Hall Effect in RuO₂, Phys. Rev. Lett. 133, 56701 (2024).
- [11]Y. Guo et al., Direct and Inverse Spin Splitting Effects in Altermagnetic RuO₂, Adv. Sci. 11, 2400967 (2024).DOI
- [12]Y. Liu, H. Bai, Y. Song, Z. Ji, S. Lou, Z. Zhang, and C. Song, Inverse Altermagnetic Spin Splitting Effect-Induced Terahertz Emission in RuO₂, Adv. Opt. Mater. 11, 2300177 (2023).DOI
- [13]Z. Feng et al., An anomalous Hall effect in altermagnetic ruthenium dioxide, Nat. Electron. 5, 735 (2022).DOI
- [14]H. Bai et al., Efficient Spin-to-Charge Conversion via Altermagnetic Spin Splitting Effect in Antiferromagnet RuO₂, Phys. Rev. Lett. 130, 216701 (2023).DOI
- [15]J. Liu, J. Zhan, T. Li, J. Liu, S. Cheng, Y. Shi, L. Deng, and M. Zhang, Absence of Altermagnetic Spin Splitting Character in Rutile Oxide RuO₂, Phys. Rev. Lett. 133, 176401 (2024).DOI
- [16]P. Keßler et al., Absence of magnetic order in RuO₂: insights from μSR spectroscopy and neutron diffraction, Npj Spintron. 2, 50 (2024).
- [17]M. Hiraishi, H. Okabe, A. Koda, R. Kadono, T. Muroi, D. Hirai, and Z. Hiroi, Nonmagnetic Ground State in RuO₂ Revealed by Muon Spin Rotation, Phys. Rev. Lett. 132, 166702 (2024).DOI
- [18]Y. Wang et al., Absence of Transport Altermagnetic Spin-Splitting Effect in RuO₂, Nano Lett. 26, 2548 (2026).arxiv.org/abs/2503.07985
- [19]Z. Q. Wang et al., Inverse Spin Hall Effect Dominated Spin-Charge Conversion in (101) and (110)-Oriented RuO₂ Films, Phys. Rev. Lett. 133, 046701 (2024).DOI
- [20]L. Zhang et al., Coexistence and Tunability of Orbital and Spin Hall Effects in RuO₂, Phys. Rev. Lett. 137, 66701 (2026).
- [21]M. Arucu, Orbital Hall conductivity in a d-wave altermagnet : a multi- orbital tight-binding study, Sci. Rep. 16, 32096 (2026).DOI
- [22]G. Shi, H. Bai, C. Zhang, L. Han, and J. Dai, Efficient field-free magnetization switching through orbital-current-enhanced magnon torque, Nat. Commun. (2026).DOI
- [23]T. Kampfrath et al., Terahertz spin current pulses controlled by magnetic heterostructures, Nat. Nanotechnol. 8, 256 (2013).DOI
- [24]T. Seifert et al., Efficient metallic spintronic emitters of ultrabroadband terahertz radiation, Nat. Photonics 10, 483 (2016).DOI
- [25]D. Yang, J. Liang, C. Zhou, L. Sun, R. Zheng, S. Luo, Y. Wu, and J. Qi, Powerful and Tunable THz Emitters Based on the Fe/Pt Magnetic Heterostructure, Adv. Opt. Mater. 4, 1944 (2016).DOI
- [26]T. Guan, J. Liu, W. Qin, Y. Cui, S. Wang, Y. Wu, and Z. Tao, Evidences of subnanometre orbital diffusion length in heavy metals using terahertz emission spectroscopy, Nat. Nanotechnol. 21, 538 (2026).DOI
- [27]Y. Xu, F. Zhang, A. Fert, H. Y. Jaffres, Y. Liu, R. Xu, Y. Jiang, H. Cheng, and W. Zhao, Orbitronics: light-induced orbital currents in Ni studied by terahertz emission experiments, Nat. Commun. 15, 2043 (2024).DOI
- [28]T. S. Seifert, D. Go, H. Hayashi, R. Rouzegar, F. Freimuth, K. Ando, Y. Mokrousov, and T. Kampfrath, Time-domain observation of ballistic orbital-angular-momentum currents with giant relaxation length in tungsten, Nat. Nanotechnol. 18, 1132 (2023).
- [29]S. Zhang et al., Nonrelativistic and nonmagnetic terahertz-wave generation via ultrafast current control in anisotropic conductive heterostructures, Adv. Photonics 5, 056006 (2023).DOI
- [30]D. T. Plouff, L. Scheuer, S. Shrestha, W. Wu, N. J. Parvez, S. Bhatt, X. Wang, L. Gundlach, M. B. Jung, and J. Q. Xiao, Revisiting altermagnetism in RuO₂: a study of laser-pulse induced charge dynamics by time-domain terahertz spectroscopy, Npj Spintron. 3, 17 (2025).
- [31]J. Jechumtál et al., Spin- to charge-current conversion in altermagnetic candidate RuO₂ probed by terahertz emission spectroscopy, Phys. Rev. B 113, 054439 (2026).
- [32]D. Go, K. Ando, A. Pezo, and Y. Mokrousov, Orbital Pumping by Magnetization Dynamics in Ferromagnets, Phys. Rev. B 111, L140409 (2025).arxiv.org/abs/2309.14817
- [33]H. Hayashi, D. Go, S. Haku, Y. Mokrousov, and K. Ando, Observation of orbital pumping, Nat. Electron. 7, 646 (2024).arxiv.org/abs/2304.05266
- [34]A. Leitenstorfer, S. Hunsche, J. Shah, M. C. Nuss, and W. H. Knox, Detectors and sources for ultrabroadband electro-optic sampling: Experiment and theory, Appl. Phys. Lett. 74, 1516 (1999).DOI
- [35]Q. Wu and X. C. Zhang, Free-space electro-optic sampling of terahertz beams, Appl. Phys. Lett. 67, 3523 (1995).
- [36]T. Berlijn et al., Itinerant Antiferromagnetism in RuO₂, Phys. Rev. Lett. 118, 077201 (2017).
- [37]D. Yang, Z. Li, Y. Dai, L. Lang, Z. Shi, Z. Yuan, and S. Zhou, Ferromagnetic Interface Engineering of Spin-Charge Conversion in RuO₂, Phys. Rev. Lett. 136, 26702 (2026).arxiv.org/abs/2512.21100
- [38]E. Beaurepaire, G. M. Turner, S. M. Harrel, M. C. Beard, J. Y. Bigot, and C. A. Schmuttenmaer, Coherent terahertz emission from ferromagnetic films excited by femtosecond laser pulses, Appl. Phys. Lett. 84, 3465 (2004).DOI
- [39]W. Zhang et al., Ultrafast terahertz magnetometry, Nat. Commun. 11, 4247 (2020).DOI
- [40]Q. Zhang, Z. Luo, H. Li, Y. Yang, X. Zhang, and Y. Wu, Terahertz Emission from Anomalous Hall Effect in a Single-Layer Ferromagnet, Phys. Rev. Appl. 12, 054027 (2019).DOI
- [41]C. Zhou et al., Broadband Terahertz Generation via the Interface Inverse Rashba-Edelstein Effect, Phys. Rev. Lett. 121, 086801 (2018).DOI
- [42]M. B. Jungfleisch, Q. Zhang, W. Zhang, J. E. Pearson, R. D. Schaller, H. Wen, and A. Hoffmann, Control of Terahertz Emission by Ultrafast Spin-Charge Current Conversion at Rashba Interfaces, Phys. Rev. Lett. 120, 207207 (2018).DOI
- [43]G. Torosyan, S. Keller, L. Scheuer, R. Beigang, and E. T. Papaioannou, Optimized Spintronic Terahertz Emitters Based on Epitaxial Grown Fe/Pt Layer Structures, Sci. Rep. 8, 1311 (2018).
- [44]A. Akashdeep et al., Surface-Localized Magnetic Order in RuO₂ Thin Films Revealed by Low-Energy Muon Probes, Appl. Phys. Lett. 128, 022406 (2026).DOI
- [45]M. Weber et al., All Optical Excitation of Spin Polarization in d-wave Altermagnets, ArXiv:2408.05187v3 (2026).arxiv.org/abs/2408.05187