betaFeedback

WorksPhysics and Astronomy

Finite-strain second-gradient elasticity with an energetic surface: existence of minimizers, incremental theory and elastocapillary beading

Abstract

We develop a finite-strain theory of second-gradient elasticity for solids with a material surface endowed with its own constitutive energy. The bulk second gradient plays two complementary roles. First, under suitable coercivity assumptions and convexity with respect to the second gradient, we prove the existence of minimizers for nonnegative, lower semicontinuous surface energy densities, without requiring convexity, polyconvexity, positive one-homogeneity, or an upper growth bound on the surface energy. Second, it introduces an intrinsic bulk length scale that affects the onset of instability and wavelength selection. To investigate these effects, we derive an incremental small-on-large formulation in the finitely deformed configuration and apply it to the elastocapillary beading of an axially stretched soft cylinder. For an infinite cylinder and the parameters considered, increasing the second-gradient modulus delays bifurcation and shifts the critical mode towards longer wavelengths. Above a finite threshold of this modulus, the critical stretch saturates in the long-wave limit. The model is implemented in the open-source finite element code OOFEM using C1-continuous isogeometric analysis. Finite-cylinder simulations yield onset stretches in close agreement with the analytical predictions. Selected post-bifurcation branches traced by arc-length continuation exhibit beaded states and supercritical bifurcation at small second-gradient moduli, whereas larger moduli are associated with subcritical bifurcation and the formation of distinct thick and thin segments.

Introduction

The mechanical response of soft materials, including biological tissues, hydrogels, and synthetic polymers, is governed not only by bulk elasticity but also, often strongly, by surface stresses [39]. Surface effects become particularly important when a characteristic dimension of the body is comparable to the elastocapillary length, defined as the ratio of a characteristic surface stress to a bulk elastic modulus. Depending on the convention, this modulus is Young’s modulus [39] or the shear modulus [29]. The simplest surface-tension model assumes a constant, isotropic surface stress, as at a liquid interface. More generally, the continuum theory of Gurtin & Murdoch [15, 16] treats the surface as a zero-thickness elastic membrane with its own constitutive response, perfectly bonded to the underlying bulk. Surface stress may then depend on surface strain through the Shuttleworth effect (Shuttleworth [34]), demonstrated experimentally in soft gels (Xu et al. (2017)). The interplay between bulk and surface mechanics can give rise to instabilities. A canonical example is elastocapillary beading of a soft cylinder, a solid analogue of the classical Plateau–Rayleigh instability in fluids. Mora et al. [29] demonstrated experimentally that soft gel cylinders undergo beading when capillary forces overcome the elastic resistance of the bulk. Subsequent work extended the analysis to prestressed cylindrical structures, showing how axial stretch shifts the critical bifurcation threshold ([10, 40] (Fu et al. 2021)). Weakly nonlinear and energetic analyses show that the beading transition can be subcritical, with homogeneous and bifurcated states coexisting over a finite range of loading, and can be interpreted as phase separation between thin and thick states (Fu et al., 2021; Taffetani & Ciarletta, 2015a,b; Xuan & Biggins, 2017). Furthermore, the constitutive assumptions of the surface model—such as area incompressibility, curvature dependence, or negative surface tension—can also qualitatively change the instability ([3, 33, 42]). Incremental equations for curvature-dependent surface elasticity have also been derived recently (Yu et al. (2026)).

The present work combines finite-strain second-gradient bulk elasticity with an independently prescribed surface energy to address two questions: how the intrinsic bulk length scale affects elastocapillary instability and how the additional bulk regularity changes the conditions for the existence of minimizers. Classical first-gradient elasticity contains no intrinsic bulk material length scale and cannot, by itself, capture bulk size effects associated with strongly nonuniform deformation. Higher-order theories originating from the works of Toupin [43] and Mindlin [26] address this limitation by allowing the bulk energy to depend on higher spatial derivatives of the deformation ([2, 28]). In particular, second-gradient hyperelasticity introduces such a length scale by penalizing spatial variations of the deformation gradient. This mechanism is especially relevant to instability problems, where modes of different wavelengths may compete and the intrinsic length scale can therefore influence mode selection.

Recent finite-strain computations by Wang & Dortdivanlioglu [45] illustrate this role of strain-gradient elasticity in highly deformable materials. Their analyses of buckling, wrinkling, and period-doubling instabilities showed that size effects become significant when structural dimensions are comparable to the intrinsic material length scale. Increasing the strain-gradient contribution can delay the onset of instability, alter mode transitions and post-critical behavior, and even suppress particular instability modes. These findings demonstrate the physical role of higher-gradient terms in instability and pattern selection, beyond their use for numerical regularization. Here, we examine the role of bulk strain gradients in an elastocapillary instability driven by surface stresses. Specifically, we investigate how the second-gradient modulus affects the bifurcation spectrum and the critical wavelength.

Combining second-gradient elasticity with a surface energy requires distinguishing independent surface constitutive contributions from boundary terms generated by the bulk energy. Both occur in the present formulation: the bulk energy depends on the deformation gradient and its gradient, while the independently prescribed surface energy depends on the surface deformation gradient. Variation of the bulk energy also produces higher-order boundary terms through integration by parts; these are determined by the bulk constitutive law. Connections between higher-gradient bulk elasticity and surface effects were explored in Casal [8] and Mindlin [27], and subsequently by Vardoulakis, Exadaktylos, and Aifantis ([12, 44]). In particular, Exadaktylos & Vardoulakis [12] extended Biot’s stability analysis of a prestressed elastic half-space (Biot [7]) to gradient elasticity. Although the resulting wrinkling-type instability differs from the cylindrical beading mode studied here, it provides a precedent for the influence of higher-gradient bulk elasticity on surface instability.

By contrast, the present formulation follows the theory of material surfaces of Gurtin & Murdoch [15, 16], in which the surface is endowed with its own constitutive response and material parameters. Geometrically nonlinear formulations of such energetic surfaces are well established ([21, 23, 24]). Moreover, Javili et al. (2013a) developed a higher-gradient framework with independent bulk, surface, and edge energies, and related the admissible boundary kinematics to the gradient order in the bulk. When the bulk energy depends on H=∇FH = \nabla F, the surface energy may depend on the full deformation gradient at the surface and not only on its tangential projection, i.e., including its action in the normal direction. Here, we retain the tangential dependence, that is, the surface energy keeps the Gurtin–Murdoch form Φ(Fs)\Phi(F_{\mathrm{s}}) with Fs=FIsF_{\mathrm{s}} = F I_{\mathrm{s}}, which a first-gradient bulk already admits. The second gradient supplies an intrinsic bulk length scale and the regularity needed for the existence result in § 4. Since the bulk and surface energies are prescribed independently, their material parameters can be varied separately to distinguish their effects on instability.

On the variational side, a classical existence framework for finite-strain second-gradient elasticity combines suitable coercivity assumptions with convexity in the highest-order deformation gradient (see, e.g., [25]). This requirement can be relaxed within more general notions of higher-order polyconvexity, as introduced by Ball et al. [4] and subsequently employed in nonlinear higher-gradient elasticity ([17]). In the present setting, we adopt the simpler assumption of convexity with respect to the second deformation gradient HH, while imposing neither convexity nor polyconvexity with respect to the first deformation gradient FF. A conceptually different regularization is provided by gradient polyconvexity, in which the stored energy depends on gradients of selected minors of FF, rather than on the full second deformation gradient ∇F\nabla F ([5, 18]).

The additional regularity provided by the second-gradient bulk is particularly useful when an independent surface energy is present. In a first-gradient theory, bulk energy alone generally does not provide a boundary trace of FF, so the surface term requires suitable surface regularity or additional constitutive structure. One approach is surface polyconvexity, originating in the interface polyconvexity of Šilhavý [35, 36] and used for energetic surfaces in our previous work ([19]). In that measure-theoretic formulation, convexity and positive one-homogeneity underpin the lower semicontinuity of the surface contribution. In the present second-gradient setting, existence can be established without these structural restrictions on the surface energy. Under the assumptions of our existence theorem, bounded-energy sequences have subsequences whose boundary traces of FF converge strongly in L1L^1, and hence almost everywhere along a further subsequence. For nonnegative, lower semicontinuous surface densities, this gives the lower semicontinuity needed for the direct method. No surface convexity, polyconvexity, positive one-homogeneity, or upper growth bound is required, provided the admissible class contains a deformation of finite total energy. The second-gradient bulk thus serves two complementary purposes: it introduces a physical length scale that affects instability and wavelength selection, and it provides the boundary compactness needed to accommodate a broader class of independently prescribed surface energies.

This framework is developed at the levels of variational formulation, existence, incremental theory, and nonlinear computation, and the paper is organized as follows. § 2 introduces the bulk and surface kinematics, while § 3 derives the equilibrium equations together with the associated higher-order bulk, surface, and edge conditions. § 4 establishes existence of minimizers and discusses what its assumptions require of the constitutive laws. The incremental small-on-large formulation is developed in § 5 and applied to an axially stretched cylinder in § 6. § 7 examines the effect of the second-gradient modulus on the bifurcation threshold and critical wavelength, and § 8 compares finite-cylinder computations with the infinite-cylinder predictions and follows selected post-bifurcation branches by arc-length continuation. Finally, § 9 summarizes the conclusions. In addition, the push-forward derivation and intermediate cylinder calculations are given for convenience in Appendix § 11 and Appendix § 12, respectively.

Kinematics

The geometric and kinematic notation employed in what follows is collected in this section; fuller expositions are available in Horák et al. [19], Yu et al. (2026), and Šilhavý [37].

Let the reference configuration occupy a bounded domain Ω⊂R3\Omega\subset\mathbb{R}^{3} with piecewise-smooth boundary Γ=∂Ω\Gamma= \partial\Omega. Surface energy is carried by a portion S⊆ΓS \subseteq\Gamma. We partition Γ\Gamma into finitely many smooth faces Γℓ\Gamma_{\ell}, with the index ℓ\ell labeling the individual faces. The partition is chosen so that SS is a union of faces, up to their boundary curves. This may require subdividing an otherwise smooth part of Γ\Gamma along the rim of SS.

Let CC denote the union of the piecewise-smooth curves separating adjoining faces. It includes the geometric edges of the body, the rim of SS, and any additional subdivision curves. Away from vertices, exactly two faces meet at each point of CC. The vertices have zero arc-length measure and therefore do not contribute to line integrals.

Boundary fields, such as the outward unit normal NN and the tangential projector IsI_{s}, are defined on each face separately and may jump across CC. On CC, [⋅]ℓ[\cdot]_{\ell} denotes the one-sided limit from Γℓ\Gamma_{\ell}, whereas bulk fields remain single-valued. At a given point of CC away from vertices, let F\mathcal{F} denote the set of indices of the two adjoining faces, and let FS⊆F\mathcal{F}_{S} \subseteq\mathcal{F} identify those carrying surface energy.

Material points of the reference configuration are labeled by their position XX. Under a deformation ϕ:Ω→R3\phi: \Omega\to\mathbb{R}^{3}, the material point XX is taken to a point yy of the deformed configuration ϕ(Ω)\phi(\Omega),

y=ϕ(X),X∈Ω.(1)y = \phi(X), \qquad X \in\Omega. \tag*{(1)}

For the classical kinematic, equilibrium and incremental formulas, ϕ\phi is assumed sufficiently smooth, injective, and orientation-preserving. It is assumed further that ϕ\phi, together with its derivatives, extends continuously to the closure Ω‾\overline{\Omega}, with det⁡∇ϕ>0\det\nabla\phi> 0 there; no notational distinction is drawn between ϕ\phi and that extension. Restriction of ϕ\phi to the boundary furnishes the surface deformation ϕs:Γ→ϕ(Γ)\phi_{s} : \Gamma\to\phi(\Gamma),

ϕs(X)=ϕ(X),X∈Γ.(2)\phi_{s}(X) = \phi(X), \qquad X \in\Gamma. \tag*{(2)}

Bulk deformation

In the bulk, the gradient of the deformation is

F=∇ϕ=∂y∂X,(3)F = \nabla\phi= \frac{\partial y}{\partial X}, \tag*{(3)}

the operator ∇\nabla being the gradient relative to the reference coordinates. This tensor transports infinitesimal vectors of the reference configuration into the deformed one, while the change of volume is controlled by the Jacobian determinant J=det⁡(F)J = \det(F); the reference element dVdV and the current element dvdv are tied by dv=J dVdv = J\,dV. Additionally, preservation of orientation imposes J>0J > 0.

With line and volume elements accounted for, there remains the transport of area elements. This is the content of Nanson’s formula, which ties the oriented reference element N dAN\,dA to its deformed counterpart n dan\,da through

n da=cof⁡(F)N dA,(4)n\,da = \operatorname{cof}(F)N\,dA, \tag*{(4)}

where the unit outward normals of the reference and the current configuration are written NN and nn, respectively. As for the cofactor tensor of FF, it is characterized by the universal property

Fu×Fv=cof⁡(F)(u×v),∀ u,v∈R3,(5)F u \times F v = \operatorname{cof}(F)(u \times v), \qquad\forall\,u,v \in\mathbb{R}^{3}, \tag*{(5)}

with ×\times denoting the cross product; whenever FF is invertible it possesses the explicit representation cof⁡(F)=JF−T\operatorname{cof}(F) = JF^{-T}.

A higher-order measure of the bulk deformation is provided by the second gradient of the deformation map,

H=∇2ϕ=∇(∇ϕ).(6)H = \nabla^{2}\phi= \nabla(\nabla\phi). \tag*{(6)}

Surface deformation

Deformation measures attached to the boundary presuppose a notion of differentiation for fields that live on the boundary surface alone. We therefore begin from the differential of a mapping on a manifold.

Consider a tensor field Ds:Γ→V\mathbf{D}_s:\Gamma\to V on the boundary surface Γ\Gamma with values in a finite-dimensional vector space VV. The cases required below are V=RV=\mathbb{R}, R3\mathbb{R}^3 and R3⊗R3\mathbb{R}^3\otimes\mathbb{R}^3, for which Ds\mathbf{D}_s is a scalar, a vector, or a second-order tensor field, respectively. At a point XX the surface gradient of Ds\mathbf{D}_s is that linear transformation ∇sDs(X):R3→V\nabla_s\mathbf{D}_s(X):\mathbb{R}^3\to V for which

lim⁡Y→XY∈Γ∣Ds(Y)−Ds(X)−∇sDs(X)(Y−X)∣∣Y−X∣=0,(7)\lim_{\substack{Y\to X\\Y\in\Gamma}}\frac{\left|\mathbf{D}_s(Y)-\mathbf{D}_s(X)-\nabla_s\mathbf{D}_s(X)(Y-X)\right|}{|Y-X|}=0, \tag*{(7)}

as well as

∇sDs(X)Is=∇sDs(X),(8)\nabla_s\mathbf{D}_s(X)I_s=\nabla_s\mathbf{D}_s(X), \tag*{(8)}

with Is=I−N⊗NI_s=I-N\otimes N the orthogonal projector onto TXΓT_X\Gamma, the tangent space at XX of the surface Γ\Gamma, while II stands for the identity tensor in R3\mathbb{R}^3 and ∣⋅∣|\cdot| for the Euclidean norm. Of the two requirements, the first carries over the Fréchet derivative to the manifold setting; the second widens the domain of the operator from TXΓT_X\Gamma to all of R3\mathbb{R}^3, the widening being fixed by annihilation of the normal direction, ∇sDs(X)N=0\nabla_s\mathbf{D}_s(X)N=0. The convention adopted is that of Šilhavý [37], and it departs slightly from the classical treatment of Gurtin & Murdoch [15], in which the surface gradient is declared on the tangent plane alone. The advantage is that ∇s\nabla_s acts as a linear map on one and the same space R3\mathbb{R}^3 at every point of Γ\Gamma, so that expressions may be combined without regard for the local tangent plane. Should Ds\mathbf{D}_s arise as the trace of a bulk field D:Ω→V\mathbf{D}:\Omega\to V, its surface gradient is obtained from the bulk gradient by tangential projection,

∇sDs=(∇D)Is.(9)\nabla_s\mathbf{D}_s=(\nabla\mathbf{D})I_s. \tag*{(9)}

A companion operator is the surface divergence. For a tensor field Rs:Γ→V⊗R3\mathbf{R}_s:\Gamma\to V\otimes\mathbb{R}^3 on the boundary, with V=RV=\mathbb{R} or R3\mathbb{R}^3, it is the unique field Div⁡s(Rs):Γ→V\operatorname{Div}_s(\mathbf{R}_s):\Gamma\to V for which

Div⁡s(Rs)⋅v=tr⁡(∇s(RsTv))∀v∈V,(10)\operatorname{Div}_s(\mathbf{R}_s)\cdot\mathbf{v}=\operatorname{tr}\left(\nabla_s(\mathbf{R}_s^{T}\mathbf{v})\right)\qquad\forall\mathbf{v}\in V, \tag*{(10)}

with RsT:Γ→R3⊗V\mathbf{R}_s^T:\Gamma\to\mathbb{R}^3\otimes V the transpose of Rs\mathbf{R}_s. The scalar case V=RV=\mathbb{R}, in which Rs:Γ→R⊗R3≃R3\mathbf{R}_s:\Gamma\to\mathbb{R}\otimes\mathbb{R}^3\simeq\mathbb{R}^3 is nothing but a vector field over Γ\Gamma, recovers the familiar Div⁡s(Rs)=tr⁡(∇sRs)\operatorname{Div}_s(\mathbf{R}_s)=\operatorname{tr}(\nabla_s\mathbf{R}_s). A product (Leibniz) rule accompanies the definition; for arbitrary a:Γ→V\mathbf{a}:\Gamma\to V it reads

Div⁡s(RsTa)=Div⁡s(Rs)⋅a+Rs⋅∇sa,(11)\operatorname{Div}_s(\mathbf{R}_s^T\mathbf{a})=\operatorname{Div}_s(\mathbf{R}_s)\cdot\mathbf{a}+\mathbf{R}_s\cdot\nabla_s\mathbf{a}, \tag*{(11)}

the pairing being understood as Rs⋅∇sa:=tr⁡(RsT∇sa)\mathbf{R}_s\cdot\nabla_s\mathbf{a}:=\operatorname{tr}(\mathbf{R}_s^T\nabla_s\mathbf{a}).

On each face Γℓ\Gamma_\ell, a superficial field, Rs=RsIs\mathbf{R}_s=\mathbf{R}_sI_s, satisfies the surface divergence theorem (Steinmann [38])

∫ΓℓDiv⁡s(Rs) dA=∫∂ΓℓRsV ds,(12)\int_{\Gamma_\ell}\operatorname{Div}_s(\mathbf{R}_s)\,\mathrm{d}A=\int_{\partial\Gamma_\ell}\mathbf{R}_s\mathbf{V}\,\mathrm{d}s, \tag*{(12)}

where V\mathbf{V} is the in-plane unit normal of the boundary curve ∂Γℓ\partial\Gamma_\ell, lying in the face and pointing out of it. For a field that is not superficial, an additional curvature term would appear on the right-hand side.

Surface deformation gradient

Specialization of the foregoing to the surface deformation map ϕs\boldsymbol{\phi}_s, that is, to the choice Ds=ϕs\mathbf{D}_s=\boldsymbol{\phi}_s and V=R3V=\mathbb{R}^3, produces the surface deformation gradient Fs:R3→R3\mathbf{F}_s:\mathbb{R}^3\to\mathbb{R}^3,

Fs=∇sϕs.\mathbf{F}_s=\nabla_s\boldsymbol{\phi}_s.

Tangent vectors of the reference surface are thereby carried to tangent vectors of the deformed surface. Since FsF_s is of rank two, no inverse exists in the classical sense; that role is taken over by the pseudo-inverse Fs−1:R3→R3F_s^{-1}: \mathbb{R}^3 \to\mathbb{R}^3, characterized by

References

  1. [1]Adams, R. A., & Fournier, J. J. F. (2003). Sobolev Spaces volume 140 of Pure and Applied Mathematics. (2nd ed.). Amsterdam: Academic Press.
  2. [2]Askes, H., & Aifantis, E. C. (2011). Gradient elasticity in statics and dynamics: An overview of formulations, length scale identification procedures, finite element implementations and new results. International Journal of Solids and Structures, 48, 1962–1990. doi:10.1016/j.ijsolstr.2011.03.006.DOI
  3. [3]Bakiler, A. D., Javili, A., & Dortdivanlioglu, B. (2023). Surface elasticity and area incompressibility regulate fiber beading instability. J. Mech. Phys. Solids, 176, 105298. doi:10.1016/j.jmps.2023.105298.DOI
  4. [4]Ball, J. M., Currie, J. C., & Olver, P. J. (1981). Null Lagrangians, weak continuity, and variational problems of arbitrary order. J. Funct. Anal., 41, 135–174. doi:10.1016/0022-1236(81)90085-9.DOI
  5. [5]Benešová, B., Kružík, M., & Schlömerkemper, A. (2018). A note on locking materials and gradient polyconvexity. Mathematical Models and Methods in Applied Sciences, 28, 2367–2401. doi:10.1142/S0218202518500513.DOI
  6. [6]Bigoni, D. (2012). Nonlinear Solid Mechanics: Bifurcation Theory and Material Instability. Cambridge Solid State Science Series. Cambridge: Cambridge University Press. doi:10.1017/CBO9781139178938.DOI
  7. [7]Biot, M. A. (1963). Surface instability of rubber in compression. Applied Scientific Research, Section A, 12, 168–182. doi:10.1007/BF03184638.DOI
  8. [8]Casal, P. (1961). La capillarité interne. Cahier du Groupe Français d’Études de Rhéologie, C.N.R.S., 6, 31–37.
  9. [9]Ciarlet, P. G., & Nečas, J. (1987). Injectivity and self-contact in nonlinear elasticity. Arch. Ration. Mech. Anal., 97, 171–188. doi:10.1007/BF00250807.DOI
  10. [10]Ciarletta, P., & Ben Amar, M. (2012). Peristaltic patterns for swelling and shrinking of soft cylindrical gels. Soft Matter, 8, 1760–1763. doi:10.1039/c2sm06851f.DOI
  11. [11]Crisfield, M. A. (1981). A fast incremental/iterative solution procedure that handles “snap-through”. Computers & Structures, 13, 55–62. doi:10.1016/0045-7949(81)90108-5.DOI
  12. [12]Exadaktylos, G. E., & Vardoulakis, I. (1998). Surface instability in gradient elasticity with surface energy. Int. J. Solids Struct., 35, 2251–2281. doi:10.1016/S0020-7683(97)89945-3.DOI
  13. [14]Goriely, A. (2017). The Mathematics and Mechanics of Biological Growth volume 45 of Interdisciplinary Applied Mathematics. New York: Springer. doi:10.1007/978-0-387-87710-5.DOI
  14. [15]Gurtin, M. E., & Murdoch, A. I. (1975). A continuum theory of elastic material surfaces. Arch. Ration. Mech. Anal., 57, 291–323. doi:10.1007/BF00261375.DOI
  15. [16]Gurtin, M. E., & Murdoch, A. I. (1978). Surface stress in solids. Int. J. Solids Struct., 14, 431–440. doi:10.1016/0020-7683(78)90008-2.DOI
  16. [17]Healey, T. J., & Krömer, S. (2009). Injective weak solutions in second-gradient nonlinear elasticity. ESAIM Control Optim. Calc. Var., 15, 863–871. doi:10.1051/cocv:2008050.DOI
  17. [18]Horák, M., & Kružík, M. (2020). Gradient polyconvex material models and their numerical treatment. International Journal of Solids and Structures, 195, 57–65. doi:10.1016/j.ijsolstr.2020.03.006.DOI
  18. [19]Horák, M., Šmejkal, M., & Kružík, M. (2025). Surface-polyconvex models for soft elastic solids. J. Mech. Phys. Solids, 204, 106250. doi:10.1016/j.jmps.2025.106250.DOI
  19. [20]Ioffe, A. D. (1977). On lower semicontinuity of integral functionals. I. SIAM J. Control Optim., 15, 521–538. doi:10.1137/0315035.DOI
  20. [21]Javili, A. (2018). Variational formulation of generalized interfaces for finite deformation elasticity. Math. Mech. Solids, 23, 1303–1322. doi:10.1177/1081286517719938.DOI
  21. [23]Javili, A., McBride, A., & Steinmann, P. (2013b). Thermomechanics of solids with lower-dimensional energetics: on the importance of surface, interface, and curve structures at the nanoscale. A unifying review. Appl. Mech. Rev., 65, 010802. doi:10.1115/1.4023012.DOI
  22. [24]Javili, A., Ottosen, N. S., Ristinmaa, M., & Mosler, J. (2018). Aspects of interface elasticity theory. Math. Mech. Solids, 23, 1004–1024. doi:10.1177/1081286517699041.DOI
  23. [25]Kružík, M., & Roubíček, T. (2019). Mathematical Methods in Continuum Mechanics of Solids. Interaction of Mechanics and Mathematics. Cham: Springer. doi:10.1007/978-3-030-02065-1.DOI
  24. [26]Mindlin, R. D. (1964). Micro-structure in linear elasticity. Archive for Rational Mechanics and Analysis, 16, 51–78. doi:10.1007/BF00248490.DOI
  25. [27]Mindlin, R. D. (1965). Second gradient of strain and surface-tension in linear elasticity. Int. J. Solids Struct., 1, 417–438. doi:10.1016/0020-7683(65)90006-5.DOI
  26. [28]Mindlin, R. D., & Eshel, N. N. (1968). On first strain-gradient theories in linear elasticity. Int. J. Solids Struct., 4, 109–124. doi:10.1016/0020-7683(68)90036-X.DOI
  27. [29]Mora, S., Phou, T., Fromental, J.-M., Pismen, L. M., & Pomeau, Y. (2010). Capillarity driven instability of a soft solid. Phys. Rev. Lett., 105, 214301. doi:10.1103/PhysRevLett.105.214301.DOI
  28. [30]Nečas, J. (2012). Direct Methods in the Theory of Elliptic Equations. Springer Monographs in Mathematics. Berlin, Heidelberg: Springer. doi:10.1007/978–3–642–10455–8 translated from the 1967 French original by G. Tronel and A. Kufner.DOI
  29. [31]Ogden, R. W. (1984). Non-linear elastic deformations. Chichester: Ellis Horwood.
  30. [32]Patzák, B. (2012). OOFEM — an object-oriented simulation tool for advanced modeling of materials and structures. Acta Polytechnica, 52, 59–66. doi:10.14311/1678.
  31. [33]Ru, C. (2023). Circumferential wrinkling of elastic cylinders with negative surface tension. Journal of Applied Mechanics, 90, 031001. doi:10.1115/1.4056216.
  32. [34]Shuttleworth, R. (1950). The surface tension of solids. Proc. Phys. Soc. A, 63, 444–457. doi:10.1088/0370–1298/63/5/302.
  33. [35]Šilhavý, M. (2010). Phase transitions with interfacial energy: interface null Lagrangians, polyconvexity, and existence. In K. Hackl (Ed.), IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials (pp. 233–244). Dordrecht: Springer volume 21 of IUTAM Bookseries. doi:10.1007/978–90–481–9915–6_18.
  34. [36]Šilhavý, M. (2011). Equilibrium of phases with interfacial energy: a variational approach. J. Elast., 105, 271–303. doi:10.1007/s10659–011–9341–6.
  35. [37]Šilhavý, M. (2013). A direct approach to nonlinear shells with application to surface-substrate interactions. Math. Mech. Complex Syst., 1, 211–232. doi:10.2140/memocs.2013.1.211.
  36. [38]Steinmann, P. (2008). On boundary potential energies in deformational and configurational mechanics. J. Mech. Phys. Solids, 56, 772–800. doi:10.1016/j.jmps.2007.07.001.
  37. [39]Style, R. W., Jagota, A., Hui, C.-Y., & Dufresne, E. R. (2017). Elastocapillarity: Surface tension and the mechanics of soft solids. Annual Review of Condensed Matter Physics, 8, 99–118. doi:10.1146/annurev-conmatphys-031016–025326.
  38. [40]Taffetani, M., & Ciarletta, P. (2015a). Beading instability in soft cylindrical gels with capillary energy: weakly non-linear analysis and numerical simulations. J. Mech. Phys. Solids, 81, 91–120. doi:10.1016/j.jmps.2015.05.002.
  39. [42]Taffetani, M., & Hennessy, M. G. (2024). Curvature controls beading in soft coated elastic cylinders: Finite wavemode instability and localized modulations. J. Mech. Phys. Solids, 187, 105606. doi:10.1016/j.jmps.2024.105606.
  40. [43]Toupin, R. A. (1962). Elastic materials with couple-stresses. Archive for Rational Mechanics and Analysis, 11, 385–414. doi:10.1007/BF00253945.DOI
  41. [44]Vardoulakis, I., Exadaktylos, G., & Aifantis, E. (1996). Gradient elasticity with surface energy: mode-III crack problem. Int. J. Solids Struct., 33, 4531–4559. doi:10.1016/0020–7683(95)00277–4.
  42. [45]Wang, J., & Dortdivanlioglu, B. (2025). Size-dependent instabilities in highly deformable strain-gradient materials. Journal of the Mechanics and Physics of Solids, 205, 106307. doi:10.1016/j.jmps.2025.106307.
  43. [46]Winitzki, S. (2010). Linear algebra via exterior products. Lulu, San Bernardino.
  44. [48]Xuan, C., & Biggins, J. (2017). Plateau–Rayleigh instability in solids is a simple phase separation. Phys. Rev. E, 95, 053106. doi:10.1103/PhysRevE.95.053106.
  45. [49]Yu, X., & Fu, Y. B. (2025). On the incremental equations in surface elasticity. Math. Mech. Solids, 30, 470–489. doi:10.1177/10812865231226183.

Paper details

vlnc:W_rvmytwm9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 14

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude, Codex

View statement
Looking for related papers…
Contents