betaFeedback

WorksPhysics and Astronomy

Analytic Model for Transient Plateau Filling in Vibrational Distributions of Periodically Driven Plasmas

Abstract

In periodically driven molecular plasmas, the vibrational distribution function is governed by the competition between vibration–vibration (V-V) up-pumping along the anharmonic ladder and vibration–translation (V-T) relaxation, producing the Treanor–Gordiets distribution. When vibrational energy accumulates across cycles faster than V-V exchange can populate the upper levels, the Gordiets plateau remains transiently depleted. Existing algebraic models assume a quasi-steady plateau, whereas exact transient solutions of the nonlinear V-V diffusion equation require the elapsed time since excitation and the source strength, which are unavailable in multidimensional simulations that track only local macroscopic variables. Here, elapsed time is replaced by a local vibrational energy timescale formed from the vibrational energy per molecule and its period-averaged rate of change. This reduces the diffusion equation in level space to an ordinary differential equation solved in closed form without linearization, yielding a level-dependent correction to the steady plateau governed by a single dimensionless group: the number of V-V collisions per energy timescale weighted by the plateau amplitude at the Treanor minimum. The distribution front advances as the square root of this group, and the steady distribution is recovered as the group grows large. Compared with state-to-state master-equation calculations for N2_2 under nanosecond pulse trains spanning 300-1500 K, 0.041-1 atm, and 1-100 kHz (1440 sampled states), the model reduces the 90th-percentile error in level populations from 1.88 decades for the steady model and 1.32 decades for an adapted self-similar solution to 0.53 decades, at essentially the evaluation cost of the steady model.

Introduction

ON-EQUILIBRIUM vibrational distributions in molecular gases arise in periodically driven plasmas where vibrational energy accumulates from one cycle to the next, including plasma-assisted combustion, [1, 2, 3, 4, 5] laser-induced plasmas for flame anchoring, [6, 7] sinusoidal discharges in semiconductor processing, [8, 9, 10] and atmospheric-pressure plasma sources. [11, 12, 13, 14] In all of these settings, predicting energy coupling and chemical reaction rates requires the molecular vibrational distribution function (VDF). Although the excitation mechanism varies across applications, whether via electron impact or laser absorption, the subsequent redistribution of vibrational quanta is governed by the same two competing heavy-particle processes: vibration–vibration (V–V) exchange pumps quanta upward along the anharmonic vibrational ladder, while vibration–translation (V–T) relaxation drains them into translational energy. The competition between these processes produces the characteristic two-branch Treanor–Gordiets distribution, [15, 16] in which V–V exchange sustains a Treanor distribution at low levels and V–T relaxation terminates a plateau extending across the upper levels.

Because the Treanor–Gordiets distribution governs both heavy-particle dissociation rates and electron kinetics—such as a superelastic electron–vibrational heating, for which a unified analytic closure was recently derived[17]—a substantial body of work has sought closed-form VDF descriptions that can be evaluated directly within multidimensional flow and plasma simulations. The most complete treatment, the state-to-state (StS) method, integrates a coupled rate equation for every vibrational level to capture the full VDF across all regimes. However, its computational cost scales as O(S3)O(S^3) per grid point, where SS is the number of tracked vibrational states, making

it prohibitive in multidimensional simulations with 10510^5 or more grid points. The analytic model of Adamovich, Macheret, and Rich[18] (AMR) overcomes this barrier by extending the foundational theory of Gordiets et al.[16] into a fully algebraic framework. Rather than integrating differential rate equations, AMR reconstructs both the Treanor branch and the Gordiets plateau directly from three local macroscopic quantities: gas temperature, vibrational temperature, and molecular number density. This combination of physical fidelity and negligible evaluation cost makes the AMR model well suited for coupled simulations, and it serves here as the steady-state foundation of the present work.

The AMR model, however, assumes that the VDF has reached a quasi-steady state. In the transient filling regime of a periodically driven plasma, this assumption breaks down: vibrational energy accumulates across cycles faster than V–V exchange can relay quanta to the upper levels, leaving the Gordiets plateau depleted relative to its steady-state profile when the next pulse arrives. Prior work has approached this transient regime through either numerical continuum formulations or analytical solutions. Continuum Fokker–Planck formulations, such as the modified approach of Altin et al.,[19] replace the discrete master equation with a partial differential equation (PDE) in level space, but still require numerical integration and do not meaningfully reduce the computational cost relative to StS. Conversely, the analytical theory of Zhdanov, Napartovich, and Starostin[20] (ZNS) and the related analyses of Gordiets and Zhdanok[21] yield closed-form transient solutions of the nonlinear V–V diffusion equation, with ZNS giving self-similar solutions for a source switched on or off and for a single excitation pulse. Yet each of these analytical solutions requires the elapsed time since the excitation event as an explicit input, together with either the source power or the deposited pulse energy. Neither quantity is available in a multidimensional flow or plasma simulation, which transports only the local macroscopic state at each grid point (such as gas temperature, density, and vibrational energy) and retains no record of the excitation history. Thus, to our knowledge, no analytic model currently exists for the transient filling regime that can be evaluated solely from local macroscopic variables.

This work derives such a model and validates it against StS calculations of N2_2 in repetitively pulsed nanosecond discharges. Building on the steady AMR foundation, the present model reconstructs the full transient VDF algebraically from four local macroscopic inputs—gas temperature, molecular number density, vibrational energy per molecule eve_{\mathrm{v}}, and its period-averaged rate of change dev/dt\mathrm{d}e_{\mathrm{v}}/\mathrm{d}t—without ordinary differential equation (ODE) integration. Specifically, elapsed time in the ZNS nonlinear diffusion equation is replaced by a local vibrational energy timescale τe≡ev/(dev/dt)\tau_{\mathrm{e}} \equiv e_{\mathrm{v}}/(\mathrm{d}e_{\mathrm{v}}/\mathrm{d}t). This substitution reduces the governing PDE in level space to an ODE that is solved in closed form while retaining the full nonlinearity of V–V transport. The resulting solution shows that transient plateau filling is governed by a single dimensionless group and that the distribution front advances as its square root, recovering the steady AMR plateau as this group grows large. Because dev/dt\mathrm{d}e_{\mathrm{v}}/\mathrm{d}t is a period-averaged rate available from the vibrational energy equation of a flow or plasma solver (in a gas at rest, simply by storing eve_{\mathrm{v}} from the previous cycle) and is defined identically regardless of the excitation mechanism, the model is expected to apply broadly to periodically driven plasmas in which vibrational energy builds across cycles, although this remains to be tested beyond the N2_2 cases considered here.

Model Derivation and Implementation

The present model is developed in three steps: the steady-state vibrational distribution is established first (Sec. II.A), then extended to the transient filling regime (Sec. II.B), and finally assembled into an algorithm that computes the distribution from local macroscopic variables (Sec. II.C).

Steady-State Vibrational Distribution

We begin with the steady-state vibrational distribution model of AMR, [18] which divides the vibrational manifold into two physically distinct regions separated by the Treanor minimum n⋆n^{\star}. Below n⋆n^{\star}, near-resonant V–V exchange dominates and drives the populations toward the Treanor distribution;[15] above n⋆n^{\star}, the competition between V–V up-pumping and V–T relaxation produces the Gordiets plateau.[16, 21, 22]

There, the populations follow the Treanor distribution[15, 17]

NnN0=exp⁡[−nθvTv+nθv−(En−E0)/kBTg]for n≤n⋆,(1)\frac{N_n}{N_0}=\exp\left[-\frac{n\theta_{\mathrm{v}}}{T_{\mathrm{v}}}+\frac{n\theta_{\mathrm{v}}-(\mathcal{E}_n-\mathcal{E}_0)/k_{\mathrm{B}}}{T_{\mathrm{g}}}\right]\qquad\text{for }n\le n^{\star}, \tag*{(1)}

where N0N_0 is the ground-state number density, NnN_n is the number density of vibrational level nn, kBk_{\mathrm{B}} is the Boltzmann constant, TgT_{\mathrm{g}} is the translational temperature, and TvT_{\mathrm{v}} is the vibrational temperature defined by Treanor[15] as N1/N0=exp⁡(−θv/Tv)N_1/N_0=\exp(-\theta_{\mathrm{v}}/T_{\mathrm{v}}), with θv≡(E1−E0)/kB\theta_{\mathrm{v}}\equiv(\mathcal{E}_1-\mathcal{E}_0)/k_{\mathrm{B}} denoting the characteristic vibrational temperature of the fundamental transition.[17] The vibrational energy levels En\mathcal{E}_n are given by the second-order Dunham expansion[17]

En=hcωe[(n+12)−xe(n+12)2+ye(n+12)3],(2)\mathcal{E}_n=hc\omega_{\mathrm{e}}\left[(n+\tfrac{1}{2})-x_{\mathrm{e}}(n+\tfrac{1}{2})^2+y_{\mathrm{e}}(n+\tfrac{1}{2})^3\right], \tag*{(2)}

where hh is the Planck constant, cc is the speed of light, ωe\omega_{\mathrm{e}} is the harmonic vibrational frequency, and xex_{\mathrm{e}} and yey_{\mathrm{e}} are the dimensionless first- and second-order anharmonicity constants obtained from the spectroscopic constants ωexe\omega_{\mathrm{e}}x_{\mathrm{e}} and ωeye\omega_{\mathrm{e}}y_{\mathrm{e}} in cm−1\mathrm{cm}^{-1}.[23] Evaluating Eq. (2) at n=0n=0 and n=1n=1 relates the characteristic vibrational temperature to the spectroscopic constants via kBθv=hcωe(1−2xe+3.25ye)k_{\mathrm{B}}\theta_{\mathrm{v}}=hc\omega_{\mathrm{e}}(1-2x_{\mathrm{e}}+3.25y_{\mathrm{e}}). Equation (2) also defines the first unbound vibrational level ndissn_{\mathrm{diss}} (the dissociation wall) as the smallest integer nn satisfying En−E0>D0\mathcal{E}_n-\mathcal{E}_0>D_0, where D0D_0 is the dissociation energy; for N2_2, D0=9.759D_0=9.759 eV[23] gives ndiss=48n_{\mathrm{diss}}=48, corresponding to 48 bound vibrational levels (n=0n=0 to 47).

The Treanor minimum n⋆n^{\star} is found by setting the derivative of the Treanor exponent to zero using the second-order Dunham expansion and selecting the physical root as outlined by Parent.[17]

n⋆=2xe−3ye−4xe2−12ye[TgTv+(2xe−3.25ye)(1−TgTv)]6ye.(3)n^{\star}=\frac{2x_{\mathrm{e}}-3y_{\mathrm{e}}-\sqrt{4x_{\mathrm{e}}^2-12y_{\mathrm{e}}\left[\frac{T_{\mathrm{g}}}{T_{\mathrm{v}}}+(2x_{\mathrm{e}}-3.25y_{\mathrm{e}})\left(1-\frac{T_{\mathrm{g}}}{T_{\mathrm{v}}}\right)\right]}}{6y_{\mathrm{e}}}. \tag*{(3)}

For ye<0y_{\mathrm{e}}<0, as for N2_2, n⋆n^{\star} is always real and positive. For ye>0y_{\mathrm{e}}>0, the square root can become imaginary (e.g., for O2_2 when Tg/TvT_{\mathrm{g}}/T_{\mathrm{v}} exceeds about 0.63), in which case the linear Treanor minimum, n⋆=Tg/(2xeTv)−Tg/Tv+1/2n^{\star}=T_{\mathrm{g}}/(2x_{\mathrm{e}}T_{\mathrm{v}})-T_{\mathrm{g}}/T_{\mathrm{v}}+1/2, obtained from Eq. (3) as ye→0y_{\mathrm{e}}\to0,[17] is used instead. When Tg/TvT_{\mathrm{g}}/T_{\mathrm{v}} exceeds a threshold, n⋆n^{\star} surpasses ndissn_{\mathrm{diss}} and the entire bound manifold follows the Treanor distribution. In practice, n⋆n^{\star} is not rounded, and the Treanor branch is evaluated at the integer levels n≤n⋆n\le n^{\star}.

Above n⋆n^{\star}, the steady distribution follows from Adamovich et al.,[18] with the radiative term absent for a homonuclear molecule and the long-range V–V correction neglected (the latter arises from multipole interactions and is significant only for polar species):

NnN=ΓW(n)n+1−BVTeδVTnn+1for n>n⋆,(4)\frac{N_n}{N}=\frac{\Gamma W(n)}{n+1}-\frac{B_{\mathrm{VT}}e^{\delta_{\mathrm{VT}}n}}{n+1}\qquad\text{for }n>n^{\star}, \tag*{(4)}

where NN is the total number density of the molecule. The first term is the classical Gordiets plateau sustained by V–V exchange and the second is the V–T relaxation drain. Because the V–T term grows exponentially with nn and eventually exceeds the plateau term, all levels above this cutoff point are set to zero.[18] The plateau amplitude Γ\Gamma is set by matching to the Treanor branch at n⋆n^{\star}.[18]

Γ=(n⋆+1)Nn⋆N,(5)\Gamma=(n^{\star}+1)\frac{N_{n^{\star}}}{N}, \tag*{(5)}

where Nn⋆N_{n^{\star}} is evaluated from Eq. (1). A small discontinuity between the Treanor and plateau branches may appear at n⋆n^{\star} because the two expressions are matched in amplitude through Γ\Gamma but not in slope. Because Eq. (1) gives the populations relative to N0N_0 whereas Eqs. (4)–(5) are normalized by NN, the normalization constant N0N_0 couples the two branches and is obtained by summing the distribution over all bound levels nn and enforcing conservation of molecule number. Following Macheret,[24] the wall factor W(n)W(n) accounts for the loss of molecules pumped past the dissociation boundary by V–V exchange,[18] assuming that molecules reaching the boundary are removed faster than resonant V–V exchange can supply them (Eq. 21 of Ref. 18):

W(n)=(ndiss−nndiss−n⋆)1/2.(6)W(n)=\left(\frac{n_{\mathrm{diss}}-n}{n_{\mathrm{diss}}-n^{\star}}\right)^{1/2}. \tag*{(6)}

The V–T coefficient BVTB_{\mathrm{VT}} follows from Eq. (16) of Adamovich et al.[18] for a pure diatomic gas without the long-range V–V correction (i.e., with both the diatomic mole fraction and the long-range correction factor set to unity):

BVT=kVT1→0kVV1→0⋅kBTg3δVV12hcωexeδVT,(7)B_{\mathrm{VT}}=\frac{k_{\mathrm{VT}}^{1\to0}}{k_{\mathrm{VV}}^{1\to0}}\cdot\frac{k_{\mathrm{B}}T_{\mathrm{g}}^3\delta_{\mathrm{VV}}}{12hc\omega_{\mathrm{e}}x_{\mathrm{e}}\delta_{\mathrm{VT}}}, \tag*{(7)}

where δVV\delta_{\mathrm{VV}} and δVT\delta_{\mathrm{VT}} are rate-defect parameters defined below.

Evaluating Eq. (7) requires the fundamental rate coefficients kVV1→0,0→1k_{\mathrm{VV}}^{1\to0,0\to1} and kVT1→0k_{\mathrm{VT}}^{1\to0}. A V–V collision involves two molecules exchanging vibrational quanta with rate coefficient kVVni→nf,wi→wfk_{\mathrm{VV}}^{n_i\to n_f,w_i\to w_f}, where nin_i, nfn_f and wiw_i, wfw_f are the initial and final levels of the colliding pair, whereas a V–T collision transfers vibrational quanta from a single molecule to translational motion with rate coefficient kVTni→nfk_{\mathrm{VT}}^{n_i\to n_f}. Adamovich et al. treated both fundamental rates as empirical inputs inferred from CO experiments and provided no closed-form expressions. Here, kVV1→0,0→1k_{\mathrm{VV}}^{1\to0,0\to1} is evaluated from the forced harmonic oscillator–free rotation (FHO–FR) theory of Adamovich, [25] the most complete first-principles V–V rate model available. The accuracy of the present model is therefore tied to the domain of validity of FHO–FR, which has been validated across a range of diatomic species. [25] The fundamental V–T rate kVT1→0k_{\mathrm{VT}}^{1\to0} is obtained from the Millikan–White correlation, [26] which is widely used and requires only the reduced mass and characteristic vibrational temperature of the collision pair, allowing it to be applied to any diatomic species without species-specific fitting.

For the fundamental resonant exchange, Adamovich gives the thermally averaged FHO–FR rate coefficient in closed form (Eq. 23 of Ref. 25 with m=1m=1, where m=∣nf−ni∣m=\lvert n_f-n_i\rvert is the number of quanta exchanged):

kVV1→0,0→1=364πR02uˉα2kBTgμω12,(8)k_{\mathrm{VV}}^{1\to0,0\to1}=\frac{3}{64}\pi R_0^2\bar{u}\frac{\alpha^2 k_{\mathrm{B}}T_{\mathrm{g}}}{\mu\omega_1^2}, \tag*{(8)}

where R0=α−1ln⁡(A/kBTg)R_0=\alpha^{-1}\ln(A/k_{\mathrm{B}}T_{\mathrm{g}}) is the FHO maximum interaction distance, with α\alpha the intermolecular potential steepness and AA the repulsion coefficient (4 Å−1^{-1} and 1730 eV for N2_2); uˉ=(8kBTg/πμ)1/2\bar{u}=(8k_{\mathrm{B}}T_{\mathrm{g}}/\pi\mu)^{1/2} is the mean relative collision speed for reduced mass μ\mu; and ω1=kBθv/ℏ\omega_1=k_{\mathrm{B}}\theta_{\mathrm{v}}/\hbar is the fundamental vibrational transition frequency, with ℏ\hbar the reduced Planck constant.

Next, for kVT1→0k_{\mathrm{VT}}^{1\to0}, Landau–Teller theory[27, 28] relates the relaxation time τVT\tau_{\mathrm{VT}} to the fundamental rate coefficient via τVT−1=N⋅kVT1→0⋅(1−e−θv/Tg)\tau_{\mathrm{VT}}^{-1}=N\cdot k_{\mathrm{VT}}^{1\to0}\cdot(1-e^{-\theta_{\mathrm{v}}/T_{\mathrm{g}}}). Solving for kVT1→0k_{\mathrm{VT}}^{1\to0} and substituting N=P/(kBTg)N=P/(k_{\mathrm{B}}T_{\mathrm{g}}), where PP is the pressure, yields

kVT1→0=1[(τVTP)/(kBTg)](1−e−θv/Tg),(9)k_{\mathrm{VT}}^{1\to0}=\frac{1}{[(\tau_{\mathrm{VT}}P)/(k_{\mathrm{B}}T_{\mathrm{g}})](1-e^{-\theta_{\mathrm{v}}/T_{\mathrm{g}}})}, \tag*{(9)}

in which PP cancels between NN and (τVTP)(\tau_{\mathrm{VT}}P), leaving kVT1→0k_{\mathrm{VT}}^{1\to0} a function of TgT_{\mathrm{g}} alone. The Millikan–White correlation[26] gives (τVTP)(\tau_{\mathrm{VT}}P) in atm·s as

τVTP=exp⁡[AMW(Tg−1/3−0.015μamu1/4)−18.42],(10)\tau_{\mathrm{VT}}P=\exp\left[A_{\mathrm{MW}}(T_{\mathrm{g}}^{-1/3}-0.015\mu_{\mathrm{amu}}^{1/4})-18.42\right], \tag*{(10)}

which is multiplied by 101 325 Pa/atm to convert to Pa · s for use in Eq. (9). Here, AMW=1.16×10−3μamu1/2(hcωe/kB)4/3A_{\mathrm{MW}}=1.16\times10^{-3}\mu_{\mathrm{amu}}^{1/2}(hc\omega_{\mathrm{e}}/k_{\mathrm{B}})^{4/3} (Eq. 3a of Ref. 26), where the characteristic oscillator temperature is taken, as in Millikan and White, as the harmonic value hcωe/kBhc\omega_{\mathrm{e}}/k_{\mathrm{B}} (3395 K for N2_2 in their Table I), and μamu\mu_{\mathrm{amu}} is the reduced mass of the collision pair in atomic mass units (14 amu for N2_2–N2_2).

It remains to define the rate-defect parameters δVV\delta_{\mathrm{VV}} and δVT\delta_{\mathrm{VT}} in Eqs. (4) and (7). The parameter δVV\delta_{\mathrm{VV}} enters the AMR V–V rate model,[18] which gives the single-quantum exchange rate between a molecule at level nn and a partner at level ww as

kVVn+1→n,w→w+1=(n+1)(w+1)kVV1→0,0→1×e−δVV∣n−w∣[32−12e−δVV∣n−w∣].(11)k_{\mathrm{VV}}^{n+1\to n,w\to w+1}=(n+1)(w+1)k_{\mathrm{VV}}^{1\to0,0\to1}\times e^{-\delta_{\mathrm{VV}}\lvert n-w\rvert}\left[\frac{3}{2}-\frac{1}{2}e^{-\delta_{\mathrm{VV}}\lvert n-w\rvert}\right]. \tag*{(11)}

When nn and ww are far apart, the energy mismatch of the non-resonant exchange must be absorbed by translation, suppressing the rate exponentially with increasing ∣n−w∣\lvert n-w\rvert. Following Gordiets and Zhdanok,[21] we use

δVV=0.427αμamuTghcωexekB,(12)\delta_{\mathrm{VV}}=\frac{0.427}{\alpha}\sqrt{\frac{\mu_{\mathrm{amu}}}{T_{\mathrm{g}}}\frac{hc\omega_{\mathrm{e}}x_{\mathrm{e}}}{k_{\mathrm{B}}}}, \tag*{(12)}

with α\alpha in Å−1^{-1}, μamu\mu_{\mathrm{amu}} in amu, and hcωexe/kBhc\omega_{\mathrm{e}}x_{\mathrm{e}}/k_{\mathrm{B}} and TgT_{\mathrm{g}} in K.

Likewise, the parameter δVT\delta_{\mathrm{VT}} governs the exponential growth of the V–T rate with vibrational level, {sup}18 $k_{\mathrm{VT}}^{n\to n-1}=n\cdot k_{\mathrm{VT}}^{1\to0}\cdot e^{\delta_{\mathrm{VT}}(n-1)}$, where the prefactor $n$ is the harmonic level scaling.{citep}27 Because Adamovich et al. give no prescribed formula for $\delta_{\mathrm{VT}}$, it is derived here from the Landau–Teller law,{citep}27 $k_{\mathrm{VT}}^{1\to0}\propto\exp[-(T_{\mathrm{LT}}/T_{\mathrm{g}})^{1/3}]$, where the Landau–Teller temperature scales with the square of the transition frequency as $T_{\mathrm{LT}}=2\pi^2c\omega_{\mathrm{e}}^2\mu/(\alpha^2k_{\mathrm{B}})\propto\omega_{\mathrm{e}}^2$. Anharmonicity reduces the transition frequency in the $n\to n-1$ transition to $\omega_n=\omega_{\mathrm{e}}(1-2x_{\mathrm{e}}n)$,{citep}17` yielding a level-dependent TLT,n=TLT(1−2xen)2T_{\mathrm{LT},n}=T_{\mathrm{LT}}(1-2x_{\mathrm{e}}n)^2. Substituting TLT,nT_{\mathrm{LT},n} and expanding the exponent to first order in xex_{\mathrm{e}} gives

−3(TLT,nTg)1/3=−3(TLTTg)1/3+4xe(TLTTg)1/3(n−1).(13)-3\left(\frac{T_{\mathrm{LT},n}}{T_{\mathrm{g}}}\right)^{1/3}=-3\left(\frac{T_{\mathrm{LT}}}{T_{\mathrm{g}}}\right)^{1/3}+4x_{\mathrm{e}}\left(\frac{T_{\mathrm{LT}}}{T_{\mathrm{g}}}\right)^{1/3}(n-1). \tag*{(13)}

The first term on the right-hand side is already contained in kVT1→0k_{\mathrm{VT}}^{1\to0}, while the second multiplies the rate by exp⁡[4xe(TLT/Tg)1/3(n−1)]\exp[4x_{\mathrm{e}}(T_{\mathrm{LT}}/T_{\mathrm{g}})^{1/3}(n-1)]. Combining this factor with the harmonic scaling[27] gives

kVTn→n−1=n⋅kVT1→0⋅exp⁡[4xe(TLTTg)1/3(n−1)],(14)k_{\mathrm{VT}}^{n\to n-1}=n\cdot k_{\mathrm{VT}}^{1\to0}\cdot\exp\left[4x_{\mathrm{e}}\left(\frac{T_{\mathrm{LT}}}{T_{\mathrm{g}}}\right)^{1/3}(n-1)\right], \tag*{(14)}

from which

δVT=43xeAMWTg−1/3,(15)\delta_{\mathrm{VT}}=\frac{4}{3}x_{\mathrm{e}}A_{\mathrm{MW}}T_{\mathrm{g}}^{-1/3}, \tag*{(15)}

where TLTT_{\mathrm{LT}} has been expressed through the Millikan–White correlation as TLT=(AMW/3)3T_{\mathrm{LT}}=(A_{\mathrm{MW}}/3)^3. For N2_2, Eq. (15) gives δVT≈0.27\delta_{\mathrm{VT}}\approx0.27 at 300 K and 0.16 at 1500 K, which is of the same order as δVV\delta_{\mathrm{VV}}} (≈0.48\approx0.48 and 0.21) and consistent with the approximation δVT≈δVV\delta_{\mathrm{VT}}\approx\delta_{\mathrm{VV}} adopted by ZNS for a pure diatomic gas;[20] the two parameters nonetheless differ in their temperature scaling (Tg−1/3T_{\mathrm{g}}^{-1/3} versus Tg−1/2T_{\mathrm{g}}^{-1/2}), and the Landau–Teller form is retained here. Equations (1)–(15) constitute the complete quasi-steady adjusted AMR model, which we now extend to the transient filling regime.

Transient Correction

In the steady plateau of Eq. (4), V–V up-pumping supplies quanta across all levels n>n∗n>n^* at a settled rate while V–T relaxation locally drains them and dissociation removes molecules at ndissn_{\mathrm{diss}}. During the transient filling regime of a repetitively pulsed discharge, however, V–V exchange must relay quanta upward from n∗n^* level by level, so the upper plateau lags behind its quasi-steady form. Because V–T relaxation acts locally at each level—depending only on the instantaneous population NnN_n and TgT_{\mathrm{g}}, not on the time history of the distribution—its drain term is left in its steady form. Likewise, the dissociation wall factor W(n)W(n) represents removal of molecules at the dissociation boundary, which acts only once the advancing population front reaches ndissn_{\mathrm{diss}}. We therefore account for transient plateau filling by introducing a dimensionless unsteady correction factor U(n)∈[0,1]U(n)\in[0,1] into the V–V plateau term of Eq. (4):

NnN=U(n)[ΓW(n)n+1−BVTeδVTnn+1]for n>n∗,(16)\frac{N_n}{N}=U(n)\left[\frac{\Gamma W(n)}{n+1}-\frac{B_{\mathrm{VT}}e^{\delta_{\mathrm{VT}}n}}{n+1}\right]\quad\text{for }n>n^*, \tag*{(16)}

where U(n)U(n) is derived from the pure V–V up-pumping problem without the V–T drain or the wall factor (W(n)=1W(n)=1). Combining U(n)U(n) and W(n)W(n) multiplicatively in Eq. (16) recovers the steady AMR distribution of Eq. (4) exactly as U(n)→1U(n)\to1 and is otherwise an approximation, assessed against SS in Section IV.C.

To derive U(n)U(n), we note that the steady V–V plateau population Nn∝1/(n+1)N_n\propto1/(n+1) varies with level, which complicates the nonlinear algebra of the time-dependent problem. Introducing the scaled variable

qn≡(n+1)NnN(17)q_n \equiv(n+1)\frac{N_n}{N} \tag*{(17)}

simplifies this variation: on the steady V–V plateau, qn=(n+1)⋅Γ/(n+1)=Γq_n=(n+1)\cdot\Gamma/(n+1)=\Gamma uniformly for every n>n∗n>n^*, while an empty level has qn=0q_n=0. The correction factor U(n)=qn/ΓU(n)=q_n/\Gamma therefore equals unity on a fully populated level and zero on an empty one. Treating nn as continuous and retaining only V–V exchange, the time evolution of qnq_n along the plateau is governed by the nonlinear diffusion equation of ZNS,[20]

∂qn∂t=ν(n+1)∂2(qn2)∂n2,(18)\frac{\partial q_n}{\partial t}=\nu(n+1)\frac{\partial^2(q_n^2)}{\partial n^2}, \tag*{(18)}

which behaves similarly to the nonlinear heat equation but in vibrational level space, diffusing qnq_n upward along the vibrational ladder at a rate set by the collision frequency ν\nu.[21]

The diffusion coefficient in Eq. (18) is ν=akVV1→0,0→1N\nu=a k_{\mathrm{VV}}^{1\to0,0\to1}N, with a=6hcωexe/(kBTgδVV3)a=6hc\omega_e x_e/(k_BT_g\delta_{\mathrm{VV}}^3), a dimensionless factor that follows from the V–V rate model of Eq. (11). It matches the coefficient in Eq. 11 of Ref. 18 apart from that equation’s factor 1/e1/e (ee being Euler’s number). That factor is not part of the V–V rate model: it enters AMR’s expression for the flux of quanta in terms of the population at the Treanor minimum, which is not used here. Expanding Eq. (11) in the diffusion approximation gives a coefficient of about 5.75, consistent with AMR’s 6 without the 1/e1/e. ZNS obtain a coefficient of 4 instead of 6 because they assume a purely exponential V–V rate, without the bracketed factor of Eq. (11).[20]

Although ZNS obtained exact solutions of (18), those solutions describe a steady source switched on or off at t=0t=0, or a single excitation pulse, and depend on the elapsed time since that event and on the source power or the energy deposited by the pulse. In a repetitively pulsed discharge, neither the elapsed time nor a single source power is defined, and because (18) is nonlinear, the single-pulse solution cannot be superposed over a train of pulses. Moreover, a flow or plasma solver carries no history of the vibrational distribution itself; it transports eve_v, and the rate required here is the period-averaged material rate of change dev/dtde_v/dt experienced by a gas element. In a gas at rest, this rate is computed from eve_v stored at the ends of successive interpulse intervals, dev/dt=f(ev,k−ev,k−1)de_v/dt=f(e_{v,k}-e_{v,k-1}) at the end of the interpulse of cycle kk, where ff is the pulse repetition frequency; its evaluation in a convective flow is described in Sec. II.C.

To express the transient evolution in terms of these local variables, time is eliminated from (18) by replacing the time derivative with ∂Nn/∂t≈Nn/τe\partial N_n/\partial t\approx N_n/\tau_e, where

τe=evdev/dt(19)\tau_e=\frac{e_v}{de_v/dt} \tag*{(19)}

is the vibrational energy timescale, i.e., the time it would take for eve_v to reach its current value if it had always been growing at the current period-averaged rate dev/dtde_v/dt. This is justified because every pulse deposits quanta into the low vibrational levels and V–V carries them up the ladder one collision at a time, so the energy eve_v grows with each cycle and serves as a record of how long the system has been running. When eve_v grows at a steady rate from zero, τe\tau_e equals the time elapsed since the first pulse, and as the distribution approaches steady state, V–T losses slow the growth of eve_v so that τe→∞\tau_e\to\infty, recovering the steady AMR result. Replacing ∂/∂t\partial/\partial t with 1/τe1/\tau_e is an approximation, as V–V fills the ladder from the bottom upward and different levels fill at different rates. The level-by-level detail is nonetheless retained by the diffusion term on the right of (18), which describes how V–V carries quanta up the ladder, while only the time derivative on the left is replaced.

Since qn∝Nnq_n\propto N_n, the same approximation gives ∂qn/∂t≈qn/τe\partial q_n/\partial t\approx q_n/\tau_e. Substituting into (18) and dividing by ν(n+1)\nu(n+1) yields

d2(qn2)dn2=qnντe(n+1).(20)\frac{d^2(q_n^2)}{dn^2}=\frac{q_n}{\nu\tau_e(n+1)}. \tag*{(20)}

Recalling that ν=akVV1→0,0→1N\nu=a k_{\mathrm{VV}}^{1\to0,0\to1}N, the product ντe\nu\tau_e is naturally written as aΛa\Lambda, where

Λ≡kVV1→0,0→1Nτe(21)\Lambda\equiv k_{\mathrm{VV}}^{1\to0,0\to1}N\tau_e \tag*{(21)}

counts the number of fundamental V–V collisions per energy timescale τe\tau_e. Substituting ντe=aΛ\nu\tau_e=a\Lambda into (20) gives the ODE

d2(qn2)dn2=qnaΛ(n+1),(22)\frac{d^2(q_n^2)}{dn^2}=\frac{q_n}{a\Lambda(n+1)}, \tag*{(22)}

in which time no longer appears.

(22) is second-order and involves an unknown upper boundary. In a pulsed discharge, V–V exchange pushes quanta upward by level, requiring many collisions and therefore finite time; at any instant, a front level nfrontn_{\mathrm{front}} marks the highest level V–V has reached, above which the distribution is empty. The front is part of the solution, introducing a third unknown alongside the two integration constants and requiring three boundary conditions. At n∗n^* the solution matches the Treanor branch, qn∗=Γq_{n^*}=\Gamma; at the front the population vanishes, qnfront=0q_{n_{\mathrm{front}}}=0; and the flux of quanta also vanishes at nfrontn_{\mathrm{front}} since no V–V exchange can occur with the unpopulated levels above nfrontn_{\mathrm{front}}, meaning d(qn2)/dn∣nfront=0d(q_n^2)/dn\big|_{n_{\mathrm{front}}}=0. The front nfrontn_{\mathrm{front}} is treated as a continuous variable and need not be an integer.

To reduce Eq. (22) from second- to first-order, both sides are multiplied by d(qn2)/dnd(q_n^2)/dn. The left side becomes d[(d(qn2)/dn)2/2]/dnd[(d(q_n^2)/dn)^2/2]/dn by the chain rule. On the right, we use the identity qn⋅dqn/dn=2qn2 dqn/dn=(2/3)d(qn3)/dnq_n\cdot dq_n/dn=2q_n^2\,dq_n/dn=(2/3)d(q_n^3)/dn. Integrating from nn to nfrontn_{\mathrm{front}} with n′n' as the dummy variable, the left evaluates by the fundamental theorem; applying the zero-flux condition at nfrontn_{\mathrm{front}}, the upper limit vanishes, leaving −12(d(qn2)/dn)2-\frac{1}{2}(d(q_n^2)/dn)^2. On the right, the weight −d(qn′3)/dn′-d(q_{n'}^3)/dn' is largest at the lower limit n′=nn'=n and decreases monotonically to zero at the front, where qn3q_n^3 vanishes as (nfront−n′)6(n_{\mathrm{front}}-n')^6, as the resulting solution confirms. The integrand is therefore concentrated near n′=nn'=n, and 1/(n′+1)1/(n'+1) is evaluated there and pulled out.[21] Applying qnfront=0q_{n_{\mathrm{front}}}=0 then gives ∫nnfrontd(qn′3)/dn′ dn′=−qn3\int_n^{n_{\mathrm{front}}}d(q_{n'}^3)/dn'\,dn'=-q_n^3. Assembling and multiplying by −2-2 gives the first-order equation

(d(qn2)dn)2=4qn33aΛ(n+1).(23)\left(\frac{d(q_n^2)}{dn}\right)^2=\frac{4q_n^3}{3a\Lambda(n+1)}. \tag*{(23)}

Since qnq_n decreases with nn, we have d(qn2)/dn=2qn dqn/dn<0d(q_n^2)/dn=2q_n\,dq_n/dn<0, so the negative square root is taken. Substituting d(qn2)/dn=2qn dqn/dnd(q_n^2)/dn=2q_n\,dq_n/dn and dividing by 2qn2q_n and then by qn\sqrt{q_n} separates the variables:

qn−1/2 dqn=−dn3aΛ(n+1).(24)q_n^{-1/2}\,dq_n=-\frac{dn}{\sqrt{3a\Lambda(n+1)}}. \tag*{(24)}

Integrating both sides from n∗n^* to nn, the left evaluates as 2qn−2Γ2\sqrt{q_n}-2\sqrt{\Gamma} and the right as −2(n+1−n∗+1)/3aΛ-2(\sqrt{n+1}-\sqrt{n^*+1})/\sqrt{3a\Lambda}, giving

2qn−2Γ=−23aΛ(n+1−n∗+1).(25)2\sqrt{q_n}-2\sqrt{\Gamma}=-\frac{2}{\sqrt{3a\Lambda}}\left(\sqrt{n+1}-\sqrt{n^*+1}\right). \tag*{(25)}

With U(n)=qn/ΓU(n)=q_n/\Gamma, dividing by 2, solving for qn\sqrt{q_n}, dividing by Γ\sqrt{\Gamma}, and squaring gives

U(n)=[1−n+1−n∗+13aΛΓ]2.(26)U(n)=\left[1-\frac{\sqrt{n+1}-\sqrt{n^*+1}}{\sqrt{3a\Lambda\Gamma}}\right]^2. \tag*{(26)}

Equation (26) shows that the entire unsteady correction is controlled by the single group 3aΛΓ3a\Lambda\Gamma. In the limit 3aΛΓ→∞3a\Lambda\Gamma\to\infty (when 3aΛΓ≫n+1−n⋆+1\sqrt{3a\Lambda\Gamma} \gg\sqrt{n+1}-\sqrt{n^{\star}+1}), the subtracted term is negligible for all plateau levels and U(n)→1U(n) \to1 uniformly, so Eq. (16) recovers the steady AMR distribution of Eq. (4). For finite 3aΛΓ3a\Lambda\Gamma, the correction U(n)<1U(n)<1 decreases with nn, meaning high levels are always the most depleted since V–V propagates quanta upward from the bottom of the ladder and the upper levels are the last to fill; when 3aΛΓ\sqrt{3a\Lambda\Gamma} is small, the subtracted term reaches order unity within a few levels of n⋆n^{\star} and the plateau collapses from the top down.

Setting U(nfront)=0U(n_{\mathrm{front}})=0 gives the level of the distribution front,

nfront+1=n⋆+1+3aΛΓ,(27)\sqrt{n_{\mathrm{front}}+1}=\sqrt{n^{\star}+1}+\sqrt{3a\Lambda\Gamma}, \tag*{(27)}

with nfrontn_{\mathrm{front}} capped at ndissn_{\mathrm{diss}}. The fraction of the plateau that has filled follows directly from Eq. (27): the front advances by 3aΛΓ\sqrt{3a\Lambda\Gamma}, and the plateau is completely filled when this advance reaches ndiss+1−n⋆+1\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^{\star}+1}, the distance from n⋆n^{\star} to the dissociation level. Defining the fill fraction as the ratio of the actual front advance to this filled value,

ϕ=nfront+1−n⋆+1ndiss+1−n⋆+1,(28)\phi=\frac{\sqrt{n_{\mathrm{front}}+1}-\sqrt{n^{\star}+1}}{\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^{\star}+1}}, \tag*{(28)}

where ϕ=0\phi=0 is an empty plateau and ϕ=1\phi=1 is fully filled. Substituting Eq. (27) into Eq. (28) and capping at unity gives

ϕ=min⁡[1,3aΛΓ(ndiss+1−n⋆+1)2].(29)\phi=\min\left[1,\sqrt{\frac{3a\Lambda\Gamma}{\left(\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^{\star}+1}\right)^2}}\right]. \tag*{(29)}

Setting ϕ=1\phi=1 shows that the plateau reaches its filled, quasi-steady regime when

3aΛΓ≥(ndiss+1−n⋆+1)2,(30)3a\Lambda\Gamma\ge\left(\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^{\star}+1}\right)^2, \tag*{(30)}

and remains in the transient filling phase for smaller values.

Model Implementation

In a flow or plasma solver, the present model reconstructs the local vibrational distribution algebraically from four macroscopic inputs: the translational gas temperature TgT_{\mathrm{g}}, the total molecular number density NN, the vibrational energy per molecule measured from the ground level,

ev=∑n=0ndiss−1(En−E0)Nn∑n=0ndiss−1Nn,(31)e_{\mathrm{v}}=\frac{\sum_{n=0}^{n_{\mathrm{diss}}-1}(E_n-E_0)N_n}{\sum_{n=0}^{n_{\mathrm{diss}}-1}N_n}, \tag*{(31)}

and its period-averaged rate of change dev/dtde_{\mathrm{v}}/dt. This rate is the period-averaged material (Lagrangian) rate of change of eve_{\mathrm{v}}. In a gas at rest it equals the cycle-to-cycle difference of § 2.B, but in a convective flow at a periodic steady state that difference vanishes at a fixed grid point even though gas elements passing through the discharge are still accumulating vibrational energy. There, dev/dtde_{\mathrm{v}}/dt is instead taken as the period-averaged net source per molecule in the solver’s eve_{\mathrm{v}} transport equation (excitation minus V–T and other losses), which equals Dev/DtDe_{\mathrm{v}}/Dt when diffusion is negligible.

Before solving for the level populations, all quantities that do not depend on TvT_{\mathrm{v}} are evaluated once for the given state. Specifically, the fundamental rate coefficients k1→0,0→1k^{1\to0,0\to1} and kVT1→0k^{1\to0}_{\mathrm{VT}} are computed from Eqs. (8)–(10), the rate defect parameters δVV\delta_{\mathrm{VV}} and δVT\delta_{\mathrm{VT}} from Eqs. (12) and (15), and the V–T drain coefficient bVTb_{\mathrm{VT}} from Eq. (7), along with the diffusion prefactor aa. When the vibrational energy is increasing (dev/dt>0de_{\mathrm{v}}/dt>0), the energy timescale τe\tau_{\mathrm{e}} and collision parameter Λ\Lambda are computed from Eqs. (19) and (21). Conversely, when dev/dt≤0de_{\mathrm{v}}/dt\le0, the gas is outside the transient filling regime; the unsteady correction is bypassed by setting U(n)=1U(n)=1 across all plateau levels, which recovers the steady AMR distribution of Eq. (4).

With these state parameters fixed, assembling the distribution requires determining two remaining unknowns: the vibrational temperature TvT_{\mathrm{v}} and the ground-state number density N0N_0. These are obtained through a nested bisection procedure in which an outer loop updates TvT_{\mathrm{v}} to match the input vibrational energy eve_{\mathrm{v}}, and an inner loop updates N0N_0 to conserve the total molecular number density NN. In the outer loop, each trial value of TvT_{\mathrm{v}} fixes the Treanor minimum n⋆n^{\star} via Eq. (3) and determines the normalized Treanor population ratios Nn/N0N_n/N_0 from Eq. (1) for all levels 0≤n≤n⋆0\le n\le n^{\star}. If n⋆≥ndiss−1n^{\star}\ge n_{\mathrm{diss}}-1, the Treanor branch covers every bound level and no plateau is built. Otherwise, because the plateau parameters Γ\Gamma, nfrontn_{\mathrm{front}}, and U(n)U(n) depend on the absolute population at n⋆n^{\star} while the V–T drain term in Eq. (16) is independent of N0N_0, the ground-state density cannot be factored out as a simple linear normalization constant and must instead be found iteratively in the inner bisection loop. For each trial N0N_0, the plateau amplitude Γ\Gamma at n⋆n^{\star} is evaluated from Eqs. (1) and (5), which in turn sets the active distribution front nfrontn_{\mathrm{front}} via Eq. (27), capped at ndissn_{\mathrm{diss}}. Across the active plateau levels n⋆<n≤nfrontn^{\star}<n\le n_{\mathrm{front}}, the dissociation wall factor W(n)W(n) and the unsteady correction U(n)U(n) are then computed from Eqs. (6) and (26). The complete distribution NnN_n is assembled by combining the Treanor branch of Eq. (1) for n≤n⋆n\le n^{\star} with the unsteady plateau of Eq. (16) for n⋆<n≤nfrontn^{\star}<n\le n_{\mathrm{front}}, while setting Nn=0N_n=0 above nfrontn_{\mathrm{front}} and at every level from the first one at which the exponential V–T drain exceeds the first term of Eq. (16). The inner bisection loop adjusts N0N_0 until the sum of NnN_n over all bound levels (0≤n≤ndiss−10\le n\le n_{\mathrm{diss}}-1) equals NN. Once N0N_0 has converged for the given trial TvT_{\mathrm{v}}, the corresponding vibrational energy is evaluated from Eq. (31), and the outer bisection loop adjusts TvT_{\mathrm{v}} until this calculated energy matches the input eve_{\mathrm{v}}.

Validation and Baseline Models

We assess the present model by comparing its predicted vibrational distributions against state-to-state calculations of N2_2 under repetitive nanosecond pulsed excitation. This section outlines the StS master equation and test matrix (Sec. III.A), followed by the baseline models and the evaluation protocol used in the comparisons (Sec. III.B), and the use of artificial intelligence (AI) tools (Sec. III.C).

State-to-State Reference and Test Matrix

The reference solutions are obtained by integrating the StS master equation for the 48 bound vibrational levels of N2_2 (n=0n=0–47) and the N-atom density at constant gas temperature TgT_{\mathrm{g}} and total number density N=P/(kBTg)N=P/(k_{\mathrm{B}}T_{\mathrm{g}}). The heavy-particle kinetic mechanism includes multi-quantum V–T relaxation and V–V exchange with up to three quanta transferred per collision partner (m≤3m\le3), together with V–V dissociation from the three bound levels (n=45n=45–47) and reverse three-body recombination obtained by detailed balance. All V–V and V–T rate coefficients are taken from the FHO–FR theory of Adamovich et al. [25]. The rates are tabulated at 1 K intervals from 300 to 3000 K and evaluated at the nearest tabulated TgT_{\mathrm{g}}; because each V–V channel is tabulated in both directions, the master equation sums over the table with a factor 1/2. Electron-impact vibrational excitation and superelastic de-excitation processes with m≤5m\le5 are modeled using the Maxwellian rate fits of Laporta et al. [29] at an electron temperature of Te=3.4T_{\mathrm{e}}=3.4 eV, with de-excitation rates determined by detailed balance. Each simulation models a train of 20 rectangular 100 ns pulses repeated at frequency ff, initialized from a Treanor distribution (Eq. (1)) at Tv=300T_{\mathrm{v}} = 300 K and the prescribed TgT_{\mathrm{g}}. To ensure a controlled energy input per cycle, each 100 ns pulse deposits a prescribed net vibrational energy εv\varepsilon_{\mathrm{v}} per molecule; the constant electron density during each pulse is adjusted by bisection so that the net electron-impact vibrational power (excitation minus superelastic de-excitation) integrates to εvN\varepsilon_{\mathrm{v}}N over the pulse duration. Electron processes are switched off between pulses, and the vibrational distribution is sampled at the end of each interpulse interval so that all analyzed states reflect purely heavy-particle relaxation. The representative distribution comparisons in Figure 1 and Figure 2 fix P=1P = 1 atm and εv=0.02\varepsilon_{\mathrm{v}} = 0.02 eV, whereas the parametric analyses in § 4.B and IV.C span all combinations of three gas temperatures (300, 750, and 1500 K), two pressures (0.041 and 1 atm), four repetition frequencies (1, 10, 50, and 100 kHz), and three pulse energies (0.01, 0.02, and 0.05 eV per molecule), providing 72 operating conditions and 1440 sampled interpulse states across the 20-pulse trains.

Vibrational distributions of N₂ at various gas temperatures and pulse cycles

Figure 1. Vibrational distributions of N₂ at P=1P = 1 atm, sampled at the end of the interpulse of cycles 1, 5, 10, and 20, for 100 ns pulses repeated at f=100f = 100 kHz across gas temperatures Tg=300T_g = 300, 500, and 750 K (εv=0.02\varepsilon_v = 0.02 eV per molecule per pulse). All three analytic models are evaluated from the same StS inputs eve_v and dev/dt\mathrm{d}e_v/\mathrm{d}t; 3aΛΓ3a\Lambda\Gamma is the value obtained by the present model.

Vibrational distributions of N₂ at different pulse repetition frequencies and cycles

Figure 2. Vibrational distributions of N2_2 at Tg=300T_g = 300 K and P=1P = 1 atm, sampled at the end of the interpulse of cycles 1, 5, 10, and 20, for 100 ns pulses repeated at f=10f = 10, 50, and 100 kHz (εv=0.02\varepsilon_v = 0.02 eV per molecule per pulse). All three analytic models are evaluated from the same StS inputs εv\varepsilon_v and dεv/dt\mathrm{d}\varepsilon_v/\mathrm{d}t; 3aΛΓ3a\Lambda\Gamma is the value obtained by the present model.

Baseline Models and Adapted ZNS Correction

Three algebraic models are compared against the StS reference: the quasi-steady AMR model, [18] an adapted version of the ZNS self-similar transient theory[20] (denoted “AMR + ZNS”), and the present model. Whereas a coupled flow or plasma solver would obtain eve_{\mathrm{v}} and dev/dtde_{\mathrm{v}}/dt from its vibrational energy transport equation (§ 2.C), here we evaluate the analytic models a posteriori by supplying eve_{\mathrm{v}} and the cycle-to-cycle rate dev/dt=f(ev,k−ev,k−1)de_{\mathrm{v}}/dt = f\left(e_{\mathrm{v},k} - e_{\mathrm{v},k-1}\right) directly from the StS solution at the end of each cycle kk (with ev,0e_{\mathrm{v},0} taken from the initial distribution). Feeding the exact StS vibrational energy into all three models (steady AMR uses only eve_{\mathrm{v}}) isolates errors in the predicted distribution shape from any cumulative drift in total vibrational energy.

Constructing the AMR + ZNS baseline requires adapting the ZNS transient theory so that it uses the same local macroscopic inputs as the present model. Because Eq. (18) is nonlinear, the ZNS single-pulse solution cannot be superposed across a train of pulses; we instead start from the ZNS switch-on solution for a sustained source turned on at t=0t = 0 (Eq. 16 of Ref. 20), which represents continuous net vibrational energy addition over multiple cycles. In our notation, this self-similar plateau profile reads

NnN=C1n+1−12∫0tν dt,orqn=C1−n+12∫0tν dt,(32)\frac{N_n}{N} = \frac{C_1}{n+1} - \frac{1}{2\int_0^t \nu\,\mathrm{d}t}, \qquad\text{or} \qquad q_n = C_1 - \frac{n+1}{2\int_0^t \nu\,\mathrm{d}t}, \tag*{(32)}

where C1C_1 is the steady plateau amplitude set by the external source power. To express Eq. (32) in terms of local macroscopic variables and embed it within the AMR framework, we map qnq_n to the Treanor branch at n∗n^* by setting C1=ΓC_1 = \Gamma and shifting the linear decay to originate at n∗n^* (replacing n+1n+1 with n−n∗n-n^*), and we replace the cumulative collision integral ∫0tν dt\int_0^t \nu\,\mathrm{d}t with the local collision count ντe=aΛ\nu\tau_{\mathrm{e}} = a\Lambda via Eq. (19). Dividing the resulting profile qn=Γ−(n−n∗)/(2aΛ)q_n = \Gamma- (n-n^*)/(2a\Lambda) by Γ\Gamma and flooring at zero gives the adapted ZNS unsteady correction factor,

UZNS(n)=max⁡[0, 1−n−n∗2aΛΓ].(33)U_{\mathrm{ZNS}}(n) = \max\left[0,\,1-\frac{n-n^*}{2a\Lambda\Gamma}\right]. \tag*{(33)}

Replacing U(n)U(n) with UZNS(n)U_{\mathrm{ZNS}}(n) in Eq. (16)—while retaining the same V–T drain and dissociation wall factor W(n)W(n)—ensures that the present model and the AMR + ZNS baseline differ solely in the functional form of the unsteady plateau correction, with the ZNS front nfront=n∗+2aΛΓn_{\mathrm{front}} = n^* + 2a\Lambda\Gamma advancing linearly in aΛΓa\Lambda\Gamma rather than as the square root of 3aΛΓ3a\Lambda\Gamma (Eq. (27)).

Use of AI Tools

Claude Opus 5.5 (Anthropic) was used to reduce manual derivation and implementation effort, assisting the authors with parts of the derivations of § 2.A and II.B, parts of the StS solver of Sec. III.A, and the scripts that produce the figures and Table 1. The authors verified each step of the derivations and compared the closed-form solution with a numerical solution of Eq. (22).

TgT_{\mathrm{g}}, KPP, atmff, kHz3aΛΓb3a\Lambda\Gamma^{\mathrm{b}}Statesc^{\mathrm{c}}Steady AMRAMR + ZNSPresent model
300allallall4802.211.910.46
750allallall4801.441.000.55
1500allallall4800.700.750.68
all0.041allall7202.311.790.74
all1allall7200.820.710.33
allall1all3600.350.450.33
allall10all3601.501.110.41
allall50all3602.151.690.65
allall100all3602.311.870.82
allallall<(ndiss+1−n⋆+1)2<(\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^\star+1})^28212.291.670.72
allallall≥(ndiss+1−n⋆+1)2\geq(\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^\star+1})^26190.370.820.34
allallallall14401.881.320.53

Table 1. 90th percentile of the absolute error in vibrational level populations relative to the StS solution, in decadesa^{\mathrm{a}} (∣log⁡10(Nn/NnStS)∣|\log_{10}(N_n/N_n^{\mathrm{StS}})|), pooled over all populated levels and cycles of the states meeting the conditions of each row.

Results and Analysis

We evaluate the model in four steps: first by comparing its predicted vibrational distributions directly against state-to-state calculations at representative conditions (§ 4.A), next by testing how the dimensionless group 3aΛΓ3a\Lambda\Gamma controls plateau filling (§ 4.B), then by quantifying population errors across the full parametric sweep (§ 4.C), and finally by examining the computational savings for multidimensional solvers (§ 4.D).

Transient Plateau Filling

Figure 1 compares the three algebraic models against the StS reference across gas temperatures of 300, 500, and 750 K at a pulse repetition frequency of 100 kHz. At 300 K, the plateau spans most of the vibrational ladder, and during early cycles vibrational energy is pumped into the low levels much faster than V–V collisions can relay quanta upward. In this transient regime (3aΛΓ3a\Lambda\Gamma small), the three models behave quite differently: steady AMR assumes a fully settled plateau at every cycle and severely overpopulates the upper levels; the adapted ZNS model cuts off prematurely just above the Treanor minimum n∗n^*; and the present model captures the gradual, level-by-level advance of the distribution through U(n)U(n). As additional pulses accumulate—or as the gas temperature rises, which shifts n∗n^* upward and shortens the plateau—the distribution catches up to its quasi-steady profile and all three models converge.

Figure 2 fixes the gas temperature at 300 K and steps the pulse repetition frequency across 10, 50, and 100 kHz. After the first pulse (top row), the plateau has barely begun to form at any frequency because the amplitude Γ\Gamma at the Treanor minimum is still vanishingly small. Over the next several pulses, V–T losses remain negligible at 300 K, so the accumulated vibrational energy—and hence Γ\Gamma—depends mainly on how many pulses have fired rather than on the repetition rate. What changes with frequency is the time available between pulses for V–V collisions to do their work: pulsing at 100 kHz leaves ten times less interpulse time for V–V up-pumping than pulsing at 10 kHz, directly reducing Λ\Lambda. As a result, at 50 and 100 kHz the plateau remains starved of quanta for roughly the first ten pulses, accentuating both the severe overprediction of steady AMR and the premature cutoff of the adapted ZNS model.

This early overpopulation matters most for processes that draw on the top of the ladder, such as V–V dissociation from n=45n = 45–47. At 300 K, while the plateau is still filling, StS places at most 10−1710^{-17} of the molecules in these levels, whereas steady AMR places 10−510^{-5}–10−410^{-4} there, an overprediction of 13 to 25 orders of magnitude. The present model, like AMR + ZNS, keeps its front below n=45n = 45 in these states and leaves the dissociating levels empty. Once the plateau has filled, the present model and steady AMR both give the population of these levels to within about a factor of two of StS.

These contrasting behaviors trace directly back to the nonlinearity of V–V transport in Eq. (18). Because an upward V–V step at level nn requires two excited molecules to collide, the upward flux of quanta scales with the square of the local population (qn2q_n^2). Near the advancing front, where the population becomes sparse, the upward flux chokes off and causes the true distribution to taper gradually rather than ending in a sharp cliff.

Steady AMR ignores this finite propagation speed altogether, assuming V–V exchange has already equilibrated the entire plateau after every pulse. The adapted ZNS model accounts for finite propagation, but its self-similar ansatz forces the plateau correction to drop off at a constant slope (Eq. (33)) regardless of how depleted the local population has become. Because that slope never flattens out, the ZNS distribution plunges straight to zero just above n∗n^*, and its front advances only linearly with aΛΓa\Lambda\Gamma.

By solving the time-free ODE of Eq. (22) without imposing a self-similar shape, the present model preserves the nonlinear tapering of the V–V flux near the front. As the population thins out at higher levels, the slope of U(n)U(n) flattens (Eq. (26)), allowing the distribution to feather smoothly into zero rather than cutting off abruptly. Just as importantly, the front advances as the square root of 3aΛΓ3a\Lambda\Gamma rather than linearly (Eq. (27)). During the first few pulses—when 3aΛΓ3a\Lambda\Gamma is much smaller than unity—its square root is much larger than the parameter itself, placing the front many levels higher up the ladder than the linear ZNS prediction and capturing the gradual filling seen in the state-to-state curves.

3a as the Controlling Parameter

Because the distribution front advances as 3aΛΓ\sqrt{3a\Lambda\Gamma} (Eq. (27)), whether the plateau has had time to fill depends on the combined product 3aΛΓ3a\Lambda\Gamma rather than on the collision count Λ\Lambda alone. Weighting Λ\Lambda by the plateau amplitude Γ\Gamma reflects the nonlinear nature of V–V up-pumping: a denser base at n∗n^* supplies more collision partners and drives the front upward much faster for the same number of fundamental collision times.

Figure 3 tests this scaling across all plateau-bearing states in our parametric sweep, plotting the fraction of the plateau that has filled (ϕ\phi) against the analytic prediction of Eq. (29). In panel (a), where ϕ\phi is plotted against 3aΛΓ3a\Lambda\Gamma directly, the state-to-state data span several orders of magnitude on the horizontal axis yet organize along a single rising trend. This confirms that Γ\Gamma is an essential part of the controlling group: two conditions at different temperatures may experience a similar number of V–V collisions Λ\Lambda, but the cooler condition has a lower Treanor minimum n∗n^* and an orders-of-magnitude larger plateau amplitude Γ\Gamma, driving its front upward much faster.

Because the plateau spans from n∗n^* to ndissn_{\mathrm{diss}}, the threshold value of 3aΛΓ3a\Lambda\Gamma required to reach the dissociation wall—given by (ndiss+1−n∗+1)(\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^*+1}) in Eq. (30)—depends on n∗n^*. A higher gas temperature pushes n∗n^* upward, leaving a shorter plateau that takes fewer V–V collisions to fill. Consequently, panel (a) exhibits a family of analytic curves that saturate at smaller 3aΛΓ3a\Lambda\Gamma as n∗n^* increases. Dividing 3aΛΓ3a\Lambda\Gamma by this filling threshold in panel (b) removes the dependence on plateau length, collapsing the analytic curves onto a single universal profile where full filling occurs at unity on the horizontal axis.

While the rescaled StS data follow the shape of this universal curve in panel (b), two departures stand out. First, during the filling phase (ϕ<1\phi< 1), the StS points sit systematically to the right of the analytic curve, meaning that the model’s front runs slightly ahead of the StS solution—as was visible at intermediate cycles in Figure 1(c) and Figure 2(k). This offset arises because the model assumes the Treanor branch below n∗n^* is already fully equilibrated at the instantaneous TvT_v. In reality, V–V exchange must also build the upper Treanor branch from the bottom up, so the population right at n∗n^* lags behind the equilibrium Treanor curve during rapid excitation. Reading Γ\Gamma from the equilibrium Treanor formula therefore overstates the true population at the base of the plateau and pushes the predicted front ahead of the StS reference. Because a higher gas temperature shifts n∗n^* further up the ladder onto levels that take even longer to populate, this lag—and the resulting rightward shift in panel (b)—grows with temperature. Eliminating this offset would require extending the unsteady treatment to the Treanor branch itself, which is beyond the scope of the present work. Second, the small cluster of points lying above the curve at the far left of Figure 3 corresponds to initial pulses where Γ\Gamma is nearly zero; there, local V–V collisions between the upper Treanor levels and the base of the plateau nudge the StS front slightly past n∗n^*, a cross-branch interaction not included in the plateau-only diffusion equation.

Plateau fill fraction versus scaled control parameters

Figure 3. Plateau fill fraction ϕ\phi versus (a) 3aΛΓ3a\Lambda\Gamma and (b) 3aΛΓ/(ndiss+1−n⋆+1)23a\Lambda\Gamma/(\sqrt{n_{\mathrm{diss}}+1}-\sqrt{n^\star+1})^2 across all plateau-bearing states in the parametric sweep (one symbol per interpulse interval, colored by TgT_{\mathrm{g}}). For the StS points, the horizontal coordinate is evaluated from the present model using the StS values of eve_{\mathrm{v}} and dev/dt\mathrm{d}e_{\mathrm{v}}/\mathrm{d}t, while the vertical coordinate is obtained from Eq. (28) with nfrontn_{\mathrm{front}} defined as the first level above n⋆n^\star where the StS population drops below 0.1 of the steady AMR distribution at the same eve_{\mathrm{v}}. Lines show the analytic prediction of Eq. (29), which collapses from an n⋆n^\star-dependent family in panel (a) onto a single universal curve in panel (b).

Accuracy Over the Parameter Space

Table 1 summarizes the 90th-percentile (P90) population error across all 1440 states of the parametric sweep (considering all levels where either distribution exceeds 10−6N10^{-6}N). Pooled across the entire dataset (bottom row), the steady AMR model errs by nearly two orders of magnitude (1.88 decades) and the adapted ZNS model by more than one order of magnitude (1.32 decades), whereas the present model brings the P90 error down to 0.53 decades—roughly a factor of three in level population.

Looking across the individual operating parameters in Table 1, the largest improvements consistently appear where V–V up-pumping has the furthest to climb or the least time to get there. At 300 K, where the plateau is longest and V–T relaxation is slow, the present model cuts the error from over two decades for steady AMR to under half a decade (0.46). As the gas warms to 1500 K, n∗n^* rises and rapid V–T relaxation drives the distribution to steady state within a few pulses, so all three models converge to similar accuracy. Lowering the pressure from 1 to 0.041 atm slows down the V–V collision rate and keeps almost three-quarters of the sampled states in the transient filling regime, while raising the repetition frequency toward 100 kHz leaves too little time between pulses for the plateau to equilibrate. In both of these strongly transient limits, steady AMR errors exceed two orders of magnitude, whereas the present model remains below a single decade.

Splitting the dataset by the filling threshold of Eq. (30) confirms

that these gains come entirely from the transient regime. Across the 821 states that are still actively filling, the present model reduces the error from 2.29 decades (steady AMR) and 1.67 decades (AMR + ZNS) to 0.72 decades. Once the plateau has filled (the remaining 619 states), the front has reached ndissn_{\mathrm{diss}} and the present model naturally matches steady AMR at about a third of a decade. Notably, the adapted ZNS model actually degrades accuracy on these filled states—as well as at 1500 K and 1 kHz—because its slow, linear front advance continues to artificially deplete the upper plateau even when the true distribution has already settled.

Computational Cost

While reducing the population error to half a decade is essential for reliable kinetics, practical use in a multidimensional flow or plasma solver also requires minimal per-cell overhead. A coupled simulation evaluates the vibrational distribution at every grid point on every iteration; across 10510^5 or more cells and thousands of time steps, even modest per-cell costs quickly dominate the runtime. In a state-to-state calculation, transporting a separate species continuity equation for every vibrational level adds 48 transport equations, and hence 48 unknowns per grid point, for pure N2\mathrm{N}_2 and roughly 300 for a state-resolved N2_2/O2_2/NO/CO mixture. Worse still, implicit time integration requires assembling and factoring a chemical Jacobian across all of those coupled levels at every step, with a factorization cost that grows as the cube of the number of tracked vibrational states.

The present model avoids transporting individual vibrational populations altogether. It reconstructs the distribution from four local quantities—gas temperature, number density, vibrational energy per molecule, and its period-averaged rate of change (obtained in a gas at rest simply by storing eve_v from the end of the previous pulse cycle, or in a convective flow from the period-averaged net source of the eve_v equation; Sec. II.C)—all of which are already available in a standard reacting flow or plasma solver carrying 20 to 30 macroscopic scalars. In a multi-species plasma simulation, once the model is extended to mixtures (Sec. V), replacing roughly 300 transported level populations with a single vibrational energy equation per diatomic gas would cut the number of unknowns per cell by an order of magnitude, shrink the Jacobian memory footprint by two orders of magnitude, and reduce matrix factorization cost by three orders of magnitude. At each grid point, the level populations are then recovered locally through the simple scalar bisection loop of Sec. II.C with no differential equations or matrix operations. Because steady AMR, AMR + ZNS, and the present model all run this exact same bisection loop and differ only in the closed-form factor U(n)U(n) multiplying each plateau level, the present model achieves its threefold-to-fourfold reduction in logarithmic error at essentially zero additional computational cost.

where the AMR approximation holds. Extending it to mixtures with inert diluents requires only AMR’s mole-fraction scaling of the V–V rate and partner-averaged V–T rates, while polar diatomics such as CO require retaining the long-range V–V and radiative terms; mixtures containing multiple V–V-active diatomics would additionally require inter-species V–V′ exchange, which is not treated here. Likewise, because the period-averaged rate dev/dtde_v/dt reflects only the net accumulation of vibrational energy rather than how that energy is deposited, the model should also apply to sinusoidal discharges and repetitive laser-induced plasmas, although this remains to be tested.

Finally, several modeling approximations and validation bounds point to natural directions for future work. On the theoretical side, replacing the time derivative with 1/τe1/\tau_e condenses the multi-level filling history into a single bulk energy timescale, while the V–T drain and dissociation wall factor are retained in their quasi-steady forms. The model also assumes that the Treanor branch below n∗n^* is already equilibrated at the instantaneous vibrational temperature; as discussed in Sec. IV.B, finite V–V relaxation near n∗n^* causes the upper Treanor levels to lag slightly during rapid excitation, overstating the plateau base amplitude Γ\Gamma and pushing the predicted front modestly ahead of the state-to-state reference. On the validation side, the model has thus far been evaluated a posteriori in a stationary gas during energy build-up, where the material and cycle-to-cycle rates of change of eve_v coincide. Embedding the model directly into a coupled multidimensional flow and plasma solver—evaluating the material rate from the net vibrational energy source in convective flows and extending the treatment to decaying-energy regimes—will provide a complete assessment of its performance in predictive simulations.

Conclusions

This work has derived and validated an analytic model that extends the quasi-steady AMR vibrational distribution to the transient plateau-filling regime of periodically driven molecular plasmas. By replacing elapsed time in the ZNS nonlinear V–V diffusion equation with a local vibrational energy timescale τe=ev/(dev/dt)\tau_e = e_v/(de_v/dt), the governing PDE in level space is reduced to a time-free ODE that can be solved in closed form without linearizing the V–V flux. The resulting unsteady correction factor U(n)U(n) multiplies the steady plateau and is controlled by a single dimensionless group, 3aΛΓ3a\Lambda\Gamma, which weights the number of V–V collisions per energy timescale by the plateau amplitude at the Treanor minimum. Because the full nonlinearity of V–V up-pumping is retained, the distribution front advances as the square root of 3aΛΓ3a\Lambda\Gamma rather than linearly as in adapted self-similar theory—reaching the upper ladder far faster during early pulses, avoiding the many-order-of-magnitude overprediction of the dissociating levels by the steady model, filling the plateau once the front reaches the dissociation limit, and recovering the steady AMR plateau as 3aΛΓ3a\Lambda\Gamma grows further. Across 1440 sampled states of state-to-state calculations for repetitively pulsed N2_2 discharges spanning 300–1500 K, 0.041–1 atm, and 1–100 kHz, the model reduces the 90th-percentile population error from 1.88 decades for steady AMR and 1.32 decades for the adapted ZNS baseline to 0.53 decades. Reconstructing the distribution requires only four local macroscopic quantities—gas temperature, number density, vibrational energy per molecule, and its period-averaged rate of change—avoiding transported level populations altogether at essentially the same evaluation cost as the steady AMR model.

Although benchmarked here for pure N2_2 under nanosecond pulse trains, the formulation is general with respect to both gas composition and the periodic excitation source. Because species properties enter only through molecular, spectroscopic, and FHO constants, the model is expected to apply directly to other nonpolar diatomic gases

Acknowledgments

The authors are thankful to the National Science Foundation Transport Phenomena program NSF 26-518 for supporting this research under grant #2607765. The authors are also thankful to Prof. Igor Adamovich for fruitful discussions that helped improve the quality of the manuscript.

Data Availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

References

  1. [1]Bak, M. S., Kim, W., and Cappelli, M. A., “On the quenching of excited electronic states of molecular nitrogen in nanosecond pulsed discharges in atmospheric pressure air,” Applied Physics Letters, Vol. 98, No. 1, 2011, pp. 011502. https://doi.org/10.1063/1.3535986.
  2. [2]Adamovich, I. V., Li, T., and Lempert, W. R., “Kinetic mechanism of molecular energy transfer and chemical reactions in low-temperature air-fuel plasmas,” Philosophical Transactions of the Royal Society A, Vol. 373, 2015, pp. 20140336. https://doi.org/10.1098/rsta.2014.0336.
  3. [3]Chen, B.-S., Garner, A. L., and Bane, S. P. M., “Numerical analysis of a nanosecond repetitively pulsed plasma-assisted counterflow diffusion flame,” Journal of Applied Physics, Vol. 133, 2023, pp. 203302. https://doi.org/10.1063/5.0147305.
  4. [4]Castela, M., Fiorina, B., Coussement, A., Gicquel, O., Darabiha, N., and Laux, C. O., “Modelling the impact of non-equilibrium discharges on reactive mixtures for simulations of plasma-assisted ignition in turbulent flows,” Combustion and Flame, Vol. 166, 2016, pp. 133–147. https://doi.org/10.1016/j.combustflame.2016.01.009.
  5. [5]Djoud, R. J., Laws, N., and Guerra-Garcia, C., “Mapping the performance envelope and energy pathways of plasma-assisted ignition across combustion environments,” Combustion and Flame, Vol. 271, 2025, pp. 113793. https://doi.org/10.1016/j.combustflame.2024.113793.
  6. [6]Dumitrache, C., VanOsdol, R., Limbach, C. M., and Yalin, A. P., “Control of Early Flame Kernel Growth by Multi-Wavelength Laser Pulses for Enhanced Ignition,” Scientific Reports, Vol. 7, 2017, pp. 10239. https://doi.org/10.1038/s41598-017-10457-0.
  7. [7]Yu, Y., Li, X., An, X., Yu, X., Fan, R., Chen, D., and Sun, R., “Stabilization of a premixed methane-air flame with a high repetition nanosecond laser-induced plasma,” Optics & Laser Technology, Vol. 92, 2017, pp. 24–31. https://doi.org/10.1016/j.optlastec.2017.01.001.
  8. [8]Tinck, S. and Bogaerts, A., “Role of vibrationally excited HBr in a HBr/He inductively coupled plasma used for etching of silicon,” Journal of Physics D: Applied Physics, Vol. 49, 2016, pp. 245204. https://doi.org/10.1088/0022-3727/49/24/245204.
  9. [9]Foucher, M., Marinov, D., Carbone, E., Chabert, P., and Booth, J.-P., “Highly vibrationally excited O₂ molecules in low-pressure inductively-coupled plasmas detected by high sensitivity ultra-broadband optical absorption spectroscopy,” Plasma Sources Science and Technology, Vol. 24, 2015, pp. 042001. https://doi.org/10.1088/0963-0252/24/4/042001.
  10. [10]Annušová, A., Marinov, D., Booth, J.-P., Sirse, N., da Silva, M. L., Lopez, B., and Guerra, V., “Kinetics of highly vibrationally excited O₂(X) molecules in inductively-coupled oxygen plasmas,” Plasma Sources Science and Technology, Vol. 27, 2018, pp. 045006. https://doi.org/10.1088/1361-6595/aab47d.
  11. [11]Jiang, J., Richards, C., Adamovich, I., and Bruggeman, P. J., “Molecular beam mass spectrometry measurements of vibrationally excited N₂ in the effluent of an atmospheric plasma jet: A comparison with a state-to-state kinetic model,” Plasma Sources Science and Technology, Vol. 31, No. 10, 2022, pp. 10LT03. https://doi.org/10.1088/1361-6595/ac954c.
  12. [12]Miyake, A., Shirai, N., and Sasaki, K., “Contribution of vibrationally excited molecular nitrogen to ammonia synthesis using an atmospheric-pressure plasma jet,” Journal of Applied Physics, Vol. 135, No. 21, 2024, pp. 213301. https://doi.org/10.1063/5.0208655.
  13. [13]Bruggeman, P. J., Kushner, M. J., Locke, B. R., et al., “Plasma-liquid interactions: A review and roadmap,” Plasma Sources Science and Technology, Vol. 25, No. 5, 2016, pp. 053002. https://doi.org/10.1088/0963-0252/25/5/053002.
  14. [14]Davies, H. L., Guerra, V., van der Woude, M., Gans, T., O’Connell, D., and Gibson, A. R., “Vibrational kinetics in repetitively pulsed atmospheric pressure nitrogen discharges: Average-power-dependent switching behaviour,” Plasma Sources Science and Technology, Vol. 32, No. 1, 2023, pp. 014003. https://doi.org/10.1088/1361-6595/aca9f4.
  15. [15]Treanor, C. E., Rich, J. W., and Rehm, R. G., “Vibrational Relaxation of Anharmonic Oscillators with Exchange-Dominated Collisions,” Journal of Chemical Physics, Vol. 48, No. 4, 1968, pp. 1798–1807. https://doi.org/10.1063/1.1668914.
  16. [16]Gordiets, B. F. and Mamedov, S. S., “Vibrational distribution functions and relaxation rate in anharmonic-oscillator systems,” J. Appl. Mech. Tech. Phys., Vol. 15, 1974, pp. 297–304. https://doi.org/10.1007/BF00852216.
  17. [17]Parent, B., “Superelastic Heating in Treanor-Gordiets Plasmas: A Unified Analytic Closure,” Journal of Chemical Physics, Vol. 164, 2026, pp. 181101. https://doi.org/10.1063/5.0325075.
  18. [18]Adamovich, I. V., Macheret, S. O., and Rich, J. W., “Spatial non-homogeneity effects in nonequilibrium vibrational kinetics,” Chemical Physics, Vol. 182, 1994, pp. 167–183. https://doi.org/10.1016/0301-0104(94)00004-2.
  19. [19]Altin, M., Vialetto, L., Longo, S., Viegas, P., and Diomede, P., “A Modified Fokker–Planck Approach for a Complete Description of Vibrational Kinetics in a N₂ Plasma Chemistry Model,” Journal of Physical Chemistry A, Vol. 127, No. 1, 2023, pp. 261–275. https://doi.org/10.1021/acs.jpca.2c06042.
  20. [20]Zhdanok, S. A., Napartovich, A. P., and Starostin, A. N., “Establishment of the vibrational distribution of diatomic molecules,” Sov. Phys. JETP, Vol. 49, No. 1, 1979, pp. 66–71, Zh. Eksp. Teor. Fiz. 76, 130–139 (1979).
  21. [21]Gordiets, B. F. and Zhdanok, S., “Analytical Theory of Vibrational Kinetics of Anharmonic Oscillators,” Nonequilibrium Vibrational Kinetics, edited by M. Capitelli, Vol. 39 of Topics in Current Physics, Springer, Berlin, 1986, pp. 47–84. https://doi.org/10.1007/978-3-642-48615-9_3.
  22. [22]Gordiets, B. F., Osipov, A. I., and Shelepin, L. A., Kinetic Processes in Gases and Molecular Lasers, Gordon and Breach, London, 1988, Russian original: Nauka, Moscow, 1980.
  23. [23]Linstrom, P. J. and Mallard, W. G., editors, NIST Chemistry WebBook, NIST Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg, MD, 2026. https://doi.org/10.18434/T4D303.
  24. [24]Macheret, S. O., Ph.D. thesis, I. V. Kurchatov Institute of Atomic Energy, Moscow, 1985, in Russian.
  25. [25]Adamovich, I. V., “Three-Dimensional Analytic Model of Vibrational Energy Transfer in Molecule-Molecule Collisions,” AIAA Journal, Vol. 39, No. 10, 2001, pp. 1916–1925. https://doi.org/10.2514/2.1181.
  26. [26]Millikan, R. C. and White, D. R., “Systematics of vibrational relaxation,” The Journal of Chemical Physics, Vol. 39, No. 12, 1963, pp. 3209–3213. https://doi.org/10.1063/1.1734182.
  27. [27]Nikitin, E. E. and Troe, J., “70 Years of Landau–Teller Theory for Collisional Energy Transfer: Semiclassical Three-Dimensional Generalizations of the Classical Collinear Model,” Physical Chemistry Chemical Physics, Vol. 10, No. 11, 2008, pp. 1483–1501. https://doi.org/10.1039/b715095d.
  28. [28]Landau, L. and Teller, E., “Zur Theorie der Schalldispersion,” Physikalische Zeitschrift der Sowjetunion, Vol. 10, 1936, pp. 34–43.
  29. [29]Laporta, V., Little, D. A., Celiberto, R., and Tennyson, J., “Electron-Impact Resonant Vibrational Excitation and Dissociation Processes Involving Vibrationally Excited N₂ Molecules,” Plasma Sources Science and Technology, Vol. 23, No. 6, 2014, pp. 065002. https://doi.org/10.1088/0963-0252/23/6/065002.

Paper details

vlnc:W_s8qkd4fn
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Opus 5.5

View statement
Looking for related papers…
Contents