betaFeedback

WorksPhysics and Astronomy

Construction of optimized tight-binding models using ab initio Hamiltonian: Application to monolayer 2H2H-transition metal dichalcogenides

Abstract

We present optimized tight-binding models with atomic orbitals to improve ab initio tight-binding models constructed by truncating full density functional theory (DFT) Hamiltonian based on localized orbitals. Retaining qualitative features of the original Hamiltonian, the optimization reduces quantitative deviations in overall band structures between the ab initio tight-binding model and the full DFT Hamiltonian. The optimization procedure and related details are demonstrated by using semiconducting and metallic Janus transition metal dichalcogenides monolayers in the 2H2H configuration. Varying the truncation range from partial second neighbors to third ones, we show differences in electronic structures between the truncated tight-binding model and the original full Hamiltonian, and how much the optimization can remedy the quantitative loss induced by truncation. We further elaborate the optimization process so that local electronic properties such as valence and conduction band edges and Fermi surfaces are precisely reproduced by the optimized tight-binding model. We also extend our discussions to tight-binding models including spin-orbit interactions, so we provide the optimized tight-binding model replicating spin-related properties of the original Hamiltonian such as spin textures. The optimization process described here can be readily applied to construct the fine-tuned tight-binding model based on various DFT calculations.

Introduction

Constructing Hamiltonians is an essential starting point to investigate physical systems. For condensed matter systems, electronic structures and related properties are derived from Hamiltonians. The tight-binding model, in which electrons are described in terms of hopping processes between neighboring localized orbitals, is one of modeling methods widely used to construct Hamiltonians for condensed matter systems. The tight-binding model constructed to investigate a given system can further be used to study extended systems derived from the original system, such as defected systems [1], nanostructures [2, 3], surfaces [4, 5, 6], strained systems [7, 8, 9, 10, 11], twisted systems [12, 13, 14], etc.

The tight-binding model construction begins with a relevant set of localized orbitals that mainly contributes to electronic structures around the Fermi energy [15, 16, 17]. Together with the chosen set of localized orbitals, the number of non-zero hopping neighbors between localized orbitals determines the size of the tight-binding model [15, 16, 17]. Once the overall tight-binding model is designed, the tight-binding model parameters can be determined by numerically fitting existing band structures, possibly obtained from experiments or computed by first-principle calculations based on the density functional theory (DFT) [18, 19].

From a general point of view, the fitting procedure is an optimization problem in which the tight-binding model parameters can be obtained by minimizing a cost function quantifying deviations between targeted electronic bands and ones computed by the tight-binding model [20]. Depending on initial values of tight-binding parameters it is in principle possible to reach different local minima throughout the optimization procedure. As a result of the minimization, possibly obtained tight-binding parameters do not necessarily constitute the physically correct Hamiltonian. Even though the resulting tight-binding model well reproduces targeted band structures, the tight-binding model can fail to reproduce other important physical properties such as orbital-projected density of states, spin textures, etc. This is because the optimization process focuses only on minimizing deviations between targeted electronic bands and fitted ones. This issue on the fitting procedure might be resolved by adding to the cost function additional constraints on physical properties required to retain, such as orbital characters.

Alternatively one can use DFT calculations to construct realistic tight-binding Hamiltonians. Not only do DFT calculations provide energy band structures targeted by the fitting procedure described above, but DFT calculations themselves also produce tight-binding Hamiltonian as a result of computations. DFT calculations based on atomic-like localized orbitals produce the tight-binding Hamiltonian by construction after the self-consistent calculations, and the Hamiltonian constructed by plane-wave based DFT calculations can be converted into the tight-binding one via the Wannier function transformation [21, 22, 23, 24, 25, 26, 27, 28, 29]. In this sense, the resulting DFT Hamiltonian written in terms of localized orbitals are called as the ab initio tight-binding Hamiltonian [30, 31]. The resulting ab initio tight-binding Hamiltonian provides reliable electronic structures including not only band structures but also orbital characters.

Despite the advantages mentioned above, the ab initio tight-binding Hamiltonian is very large, since localized orbitals of the Hamiltonian are generally extended over several unit cells. Since the coupling strength decreases as the inter-site distance increases, one can simplify the ab initio tight-binding Hamiltonian by truncating the Hamiltonian within a finite range of couplings, i.e., first or second nearest-neighboring couplings as suggested in Ref. [31]. The truncated ab initio tight-binding model, where significant contributions are included, qualitatively retains main properties of the original Hamiltonian. However, since hopping terms dropped out in the truncation are small but finite, the truncated model can lose a quantitative accuracy compared with the original system. In particular, for the case where it is required to precisely reproduce local features of band structures such as Fermi surfaces, spin textures around the Fermi energy, and band-edge properties, the quantitative loss induced by truncation cannot be simply ignored.

In this work we construct the optimized tight-binding model with atomic orbitals by using the truncated ab initio tight-binding Hamiltonian. Recalling that the truncated ab initio tight-binding Hamiltonian retains qualitatively reliable properties of the full DFT calculations as discussed in Ref. [31], hopping parameters of the truncated ab initio Hamiltonian can serve as a good initial set of tight-binding parameters for construction of optimized tight-binding model of atomic orbitals. The optimization process will reduce quantitative loss due to truncation, so the resulting tight-binding model with atomic orbitals can reproduce electronic structures better than the truncated ab initio Hamiltonian. Thus one can construct the optimized tight-binding model whose size is smaller than the full ab initio Hamiltonian, with accuracy of electronic structure properties secured.

To demonstrate the construction of the optimized tight-binding model based on the truncated ab initio Hamiltonian, we consider Janus transition metal dichalcogenide (TMDC) monolayers [32, 33, 34], where upper and lower chalcogen atom layers consist of different chalcogens, so the mirror symmetry with respect to the transition metal layer is naturally broken. Particularly, investigating semiconducting and metallic Janus 2H2H-TMDC monolayers, we present the optimization procedure to fine-tune local electronic structures such as valence and conduction band edges around the semiconducting band gap position, and Fermi surfaces and spin textures of metallic systems.

This paper is organized as follows. In § 2 we describe atomic configurations of monolayer Janus 2H2H-TMDC and summarize details of DFT calculations, which produce the full ab initio tight-binding Hamiltonian based on the Wannier functions. § 3.1 starts with the tight-binding model construction based on energy integrals and symmetry considerations, by following the Slater-Koster theory [15, 35]. In § 3.2 and § 3.3 we summarizes the truncation process of the full ab initio tight-binding Hamiltonian, and the accompanying optimization procedure. In § 4.1 we demonstrate band structures of truncated tight-binding models of monolayer Janus 2H2H-TMDC by increasing the truncation range from the partial second nearest neighbors to the third ones. In § 4.2 we discuss the optimized tight-binding models corresponding to truncated models. In § 4.3 we extend the optimization of the truncated tight-binding models to the case where spin-orbit coupling is included. We summarize our conclusion in § 5. Detailed expressions of energy integrals and tight-binding model parameters are provided in the supplementary data (available online).

DFT Calculations

In this work we consider the Janus TMDC monolayer in the 2H2H type, whose atomic configuration is depicted in Figure 1 [36]. As shown in Figure 1(a), a transition metal atom is surrounded by three chalcogen atoms in the upper sublayer and the other three chalcogen atoms in the lower sublayer. Since upper and lower sublayers consist of different kinds of chalcogen atoms, the Janus TMDC monolayer has broken mirror-reflection symmetry with respect to the transition metal plane. As reference systems we choose MoSSe and NbSSe, which are semiconducting and metallic respectively.

Image not extracted

Figure 1. (Color online) (a) Janus TMDC monolayer in 2H2H configuration. The largest blue circles, the middle-sized green ones, and the smallest red ones represent transition metal (TM), chalcogen on upper sub-layer (UC), and chalcogen on lower sub-layer (LC), respectively. (b) First, second, and third nearest neighbors between transition metals (MM), between chalcogen atoms (XX), and between transition metal and chalcogen atom (MX). Blue arrows denote two in-plane unit vectors a⃗1\vec{a}_1 and a⃗2\vec{a}_2.

First we perform DFT calculations on Janus TMDC monolayers, MoSSe and NbSSe. We use Quantum Espresso [37, 38] with the plane-wave (PW) basis, the PBE exchange-correlation functional [39] and norm-conserving pseudopotentials [40, 41]. Here we choose fully relativistic pseudopotentials in order to take the effect of spin-orbit coupling into account [42, 43]. We adopt 24×24×124 \times24 \times1 kk-point mesh, smearing temperature 0.0050.005 Ry with the cold smearing technique [44], and the kinetic energy cutoff 120120 Ry for self-consistent calculations. A vacuum size between periodic image layers is taken to be 3030 Å in order to remove interactions between periodic images. Figure 3, Figure 4, Figure 9, and Figure 10 illustrate band structures computed by DFT calculations, which are used as reference band structures that tight-binding models are fitted to. DFT calculations also provide other electronic structure properties such as orbital-projected band energies, Fermi surfaces, and spin textures, which are compared with tight-binding models in Sec. 4. For the full ab initio tight-binding Hamiltonian we use the maximally localized Wannier functions (MLWF) [23, 24, 25] implemented in Wannier90 [45] in order to construct five dd-orbitals of the transition metal atom and six pp-orbitals, each three of which belong to upper and lower chalcogen atoms, respectively.

Figure 3. (Color online) Band structures (red solid lines) of tTB models (upper panel) and oTB models (lower panel) for MoSSe in comparison with DFT band structures (blue dashed lines). Truncation range increases from ⟨⟨2MX⟩⟩\langle\langle2\mathrm{MX}\rangle\rangle [(a1) and (a2)] to ⟨⟨3MX⟩⟩\langle\langle3\mathrm{MX}\rangle\rangle [(b1) and (b2)] to ⟨⟨2XX⟩⟩\langle\langle2\mathrm{XX}\rangle\rangle [(c1) and (c2)] to ⟨⟨3XX⟩⟩\langle\langle3\mathrm{XX}\rangle\rangle [(d1) and (d2)]. Note that Fermi level is set to be zero in this work.

Image not extracted

Figure 4. (Color online) Band structures (red solid lines) of tTB models (upper panel) and oTB models (lower panel) for NbSSe in comparison with DFT band structures (blue dashed lines). Truncation range increases from ⟨⟨2MX⟩⟩\langle\langle2\mathrm{MX}\rangle\rangle [(a1) and (a2)] to ⟨⟨3MX⟩⟩\langle\langle3\mathrm{MX}\rangle\rangle [(b1) and (b2)] to ⟨⟨2XX⟩⟩\langle\langle2\mathrm{XX}\rangle\rangle [(c1) and (c2)] to ⟨⟨3XX⟩⟩\langle\langle3\mathrm{XX}\rangle\rangle [(d1) and (d2)].

Image not extracted

Figure 9. (Color online) Band structures (red solid lines) of TB models including SOC for MoSSe when the truncation range are ⟨⟨2MX⟩⟩\langle\langle2\mathrm{MX}\rangle\rangle, ⟨⟨3MX⟩⟩\langle\langle3\mathrm{MX}\rangle\rangle, ⟨⟨2XX⟩⟩\langle\langle2\mathrm{XX}\rangle\rangle, and ⟨⟨3XX⟩⟩\langle\langle3\mathrm{XX}\rangle\rangle. DFT band structures (blue dashed lines) are compared. Top [(a1) to (a4)], middle [(b1) to (b4)], and bottom [(c1) to (c4)] panels are band structures calculated by tTB+bSOCt\mathrm{TB}+b\mathrm{SOC}, oTB+bSOCo\mathrm{TB}+b\mathrm{SOC}, and oTB+rSOCo\mathrm{TB}+r\mathrm{SOC}, respectively.

Image not extracted

Figure 10. (Color online) Band structures (red solid lines) of TB models including SOC for NbSSe when the truncation range are ⟨⟨2MX⟩⟩\langle\langle2\mathrm{MX}\rangle\rangle, ⟨⟨3MX⟩⟩\langle\langle3\mathrm{MX}\rangle\rangle, ⟨⟨2XX⟩⟩\langle\langle2\mathrm{XX}\rangle\rangle, and ⟨⟨3XX⟩⟩\langle\langle3\mathrm{XX}\rangle\rangle. DFT band structures (blue dashed lines) are compared. Top [(a1) to (a4)], middle [(b1) to (b4)], and bottom [(c1) to (c4)] panels are band structures calculated by tTB+bSOC, oTB+bSOC, and oTB+rSOC, respectively.

Theory

Tight-Binding Model

In the Slater-Koster scheme [15], the tight-binding (TB) model reads

Hm,n(k)=∑Reik⋅REm,n(R),(1)\mathcal{H}_{m,n}(\mathbf{k}) = \sum_{\mathbf{R}} e^{i\mathbf{k}\cdot\mathbf{R}} E_{m,n}(\mathbf{R}), \tag*{(1)}

where Em,n(R)E_{m,n}(\mathbf{R}) is an energy integral, which is

Em,n(R)=⟨ϕm(0)∣H∣ϕn(R)⟩,(2)E_{m,n}(\mathbf{R}) = \langle\phi_m(0) \lvert\mathcal{H} \rvert\phi_n(\mathbf{R}) \rangle, \tag*{(2)}

where ∣ϕm(R)⟩\lvert\phi_m(\mathbf{R}) \rangle is the mmth basis state, whose center is located at the lattice vector R\mathbf{R} [46, 35].

The energy integrals respect crystal symmetries of the system. Without the mirror-reflection symmetry with respect to the transition metal plane, monolayer Janus 2H-TMDC satisfies the C3vC_{3v} point-group symmetry, which includes symmetric operations {E^,C^3,C^32,σ^v,σ^v′,σ^v′′}\{\hat{E},\hat{C}_3,\hat{C}_3^2,\hat{\sigma}_v,\hat{\sigma}'_v,\hat{\sigma}''_v\} [47]. Here E^\hat{E} is the identity operation. C^3\hat{C}_3 and C^32\hat{C}_3^2 are rotational operations by 2π/32\pi/3 and 4π/34\pi/3 around the zz axis, respectively. σ^v\hat{\sigma}_v, σ^v′\hat{\sigma}'_v, and σ^v′′\hat{\sigma}''_v represent the mirror-reflection operations whose reflection planes, which are perpendicular to the monolayer plane, include in-plane vectors (a⃗1−a⃗2)(\vec{a}_1-\vec{a}_2), (2a⃗1+a⃗2)(2\vec{a}_1+\vec{a}_2), (−a⃗1−2a⃗2)(-\vec{a}_1-2\vec{a}_2), respectively. Here a⃗1\vec{a}_1 and a⃗2\vec{a}_2 are in-plane unit vectors as shown in Figure 1(b).

Note that the point group C3vC_{3v} has three irreducible representations A1A_1, A2A_2, and EE [47]. dd orbitals of transition metals and pp orbitals of chalcogen atoms are categorized in association with irreducible representations A1A_1 and EE as follows:

A1:{dz2}, {pz}(3)A_1 : \{d_{z^2}\},\ \{p_z\} \tag*{(3)}
E:{dx2−y2,dxy}, {dzx,dyz}, {px,py}(4)E : \{d_{x^2-y^2},d_{xy}\},\ \{d_{zx},d_{yz}\},\ \{p_x,p_y\} \tag*{(4)}

Here {⋯ }\{\cdots\} indicates basis states related to one another via irreducible representations of symmetric operations. When a basis state is denoted by ∣ϕiμα⟩\lvert\phi^\alpha_{i\mu}\rangle, where α=d,p\alpha=d,p represents whether the state is dd or pp orbital, and μi\mu i means that iith basis state belonging to the μ\mu irreducible representation, basis states are written as

∣ϕ1A1d⟩=∣dz2⟩(5)\lvert\phi^d_{1A_1}\rangle= \lvert d_{z^2}\rangle \tag*{(5)}
∣ϕ1Ed⟩=∣dx2−y2⟩,∣ϕ2Ed⟩=∣dxy⟩(6)\lvert\phi^d_{1E}\rangle= \lvert d_{x^2-y^2}\rangle,\quad\lvert\phi^d_{2E}\rangle= \lvert d_{xy}\rangle \tag*{(6)}
∣ϕ3Ed⟩=∣dyz⟩,∣ϕ4Ed⟩=∣dzx⟩(7)\lvert\phi^d_{3E}\rangle= \lvert d_{yz}\rangle,\quad\lvert\phi^d_{4E}\rangle= \lvert d_{zx}\rangle \tag*{(7)}
∣ϕ1A1p⟩=∣pz⟩(8)\lvert\phi^p_{1A_1}\rangle= \lvert p_z\rangle \tag*{(8)}
∣ϕ1Ep⟩=∣px⟩,∣ϕ2Ep⟩=∣py⟩(9)\lvert\phi^p_{1E}\rangle= \lvert p_x\rangle,\quad\lvert\phi^p_{2E}\rangle= \lvert p_y\rangle \tag*{(9)}

Energy integrals Em,n(R)=Eiμ,jναβ(R)E_{m,n}(\mathbf{R}) = E^{\alpha\beta}_{i\mu,j\nu}(\mathbf{R}) are related to one another throughout symmetric operations O^={E^,C^3,C^32,σ^v,σ^v′,σ^v′′}\hat{O} = \{\hat{E}, \hat{C}_{3}, \hat{C}_{3}^{2}, \hat{\sigma}_{v}, \hat{\sigma}_{v}^{\prime}, \hat{\sigma}_{v}^{\prime\prime}\} as follows [46]:

Eiμ,jναβ(O^R)=∑i′∑j′Dii′μ(O^)Ei′μ,j′ναβ(R)Dj′jν∗(O^),(10)E^{\alpha\beta}_{i\mu,j\nu}(\hat{O}\mathbf{R}) = \sum_{i^{\prime}}\sum_{j^{\prime}} \mathcal{D}^{\mu}_{ii^{\prime}}(\hat{O}) E^{\alpha\beta}_{i^{\prime}\mu,j^{\prime}\nu}(\mathbf{R}) \mathcal{D}^{\nu*}_{j^{\prime}j}(\hat{O}), \tag*{(10)}

where Dμ(O^)\mathcal{D}^{\mu}(\hat{O}) is the representation matrix corresponding to the μ\muth irreducible representation of the symmetric operation O^\hat{O}. For the irreducible representation A1A_{1}, the corresponding matrix is unity, i.e.,

DA1(O^)=1,(11)\mathcal{D}^{A_{1}}(\hat{O}) = 1, \tag*{(11)}

References

  1. [1]N. A. Pike and D. Stroud. Tight-binding model for adatoms on graphene: Analytic density of states, spectral function, and induced magnetic moment. Phys. Rev. B, 89:115428, 2014.DOI
  2. [2]Xiao Dong, Guan Ming Wang, and Estela Blaisten-Barojas. Tight-binding model for calcium nanoclusters: Structural, electronic, and dynamical properties. Phys. Rev. B, 70:205409, 2004.DOI
  3. [3]S. Schulz and G. Czyżoll. Tight-binding model for semiconductor nanostructures. Phys. Rev. B, 72:165317, 2005.DOI
  4. [4]K. C. Pandey. Realistic tight-binding model for chemisorption: H on si and ge (111). Phys. Rev. B, 14:1557, 1976.DOI
  5. [5]B. N. Davidson and W. E. Pickett. Tight-binding study of hydrogen on the c(111), c(100), and c(110) diamond surfaces. Phys. Rev. B, 49:11253, 1994.pubmed.ncbi.nlm.nih.gov/10009976
  6. [6]Hui Qu-Yang, Bruno Kälebrı̈ng, and FL A. Marcus. Surface properties of solids using a semi-infinite approach and the tight-binding approximation. J. Chem. Phys., Vol. 98, No. 9, 1 May 1993, 98:7405, 1993.
  7. [7]Vitor M. Pereira, A. H. Castro Neto, and N. M. R. Peres. Tight-binding approach to uniaxial strain in graphene. Phys. Rev. B, 80:045401, 2009.DOI
  8. [8]Shiang Fang, Stephen Carr, Miguel A. Cazalilla, and Efthimios Kaxiras. Electronic structure theory of strained two-dimensional materials with hexagonal symmetry. Phys. Rev. B, 98:075106, 2018.DOI
  9. [9]J.-M. Jancu and P. Voisin. Tetragonal and trigonal deformations in zinc-blende semiconductors: A tight-binding point of view. Phys. Rev. B, 76:115202, 2007.DOI
  10. [10]Alexander J. Pearce, Eros Mariani, and Guido Burkard. Tetragonal and trigonal deformations in zinc-blende semiconductors: A tight-binding point of view. Phys. Rev. B, 94:155416, 2016.
  11. [11]Y. M. Niquet, D. Rideau, C. Tavernier, H. Jaouen, and X. Blase. Onsite matrix elements of the tight-binding hamiltonian of a strained crystal: Application to silicon, germanium, and their alloys. Phys. Rev. B, 79:245201, 2009.DOI
  12. [12]Pilkyung Moon and Mikito Koshino. Energy spectrum and quantum hall effect in twisted bilayer graphene. Phys. Rev. B, 85:195458, 2012.DOI
  13. [13]Pilkyung Moon and Mikito Koshino. Electronic properties of graphene/hexagonal-boron-nitride moiré superlattice. Phys. Rev. B, 90:155406, 2014.DOI
  14. [14]Pilkyung Moon, Mikito Koshino, and Young-Woo Son. Quasicrystalline electronic states in 30◦ rotated twisted bilayer graphene. Phys. Rev. B, 99:165430, 2019.DOI
  15. [15]J. C. Slater and G. F. Koster. Simplified lcao method for the periodic potential problem. Phys. Rev., 94:1498, 1954.DOI
  16. [16]D. A. Papaconstantopoulos and M. J. Mehl. The slater–koster tight-binding method: a computationally efficient and accurate approach. J. Phys.: Condens. Matter, 15:R413, 2003.DOI
  17. [17]Dimitris A. Papaconstantopoulos. Handbook of the Band Structure of Elemental Solids. Springer New York, NY, 1 edition, 2014.
  18. [18]P. Hohenberg and W. Kohn. Inhomogeneous electron gas. Phys. Rev., 136:B864, 1964.
  19. [19]W. Kohn and L. J. Sham. Self-consistent equations including exchange and correlation effects. Phys. Rev., 1965:A1133, 1965.DOI
  20. [20]E. Ridolfi, D. Le, T. S. Rahman, E. R. Mucciolo, and C. H. Lewenkopf. A tight-binding model for mos2 monolayers. J. Phys.: Condens. Matter, 27:365501, 2015.DOI
  21. [21]Gregory H. Wannier. The structure of electronic excitation levels in insulating crystals. Phys. Rev., 52:191–197, 1937.DOI
  22. [22]Gregory H. Wannier. Dynamics of band electrons in electric and magnetic fields. Rev. Mod. Phys., 34:645, 1962.DOI
  23. [23]Nicola Marzari and David Vanderbilt. Maximally localized generalized wannier functions for composite energy bands. Phys. Rev. B, 56:12847, 1997.DOI
  24. [24]I. Souza, N. Marzari, and D. Vanderbilt. Maximally localized wannier functions for entangled energy bands. Phys. Rev. B, 65:035109, 2002.DOI
  25. [25]Nicola Marzari, Arash A. Mostofi, Jonathan R. Yates, Ivo Souza, and David Vanderbilt. Maximally localized wannier functions: Theory and applications. Rev. Mod. Phys., 84:1419, 2012.DOI
  26. [26]K. S. Thygesen, L. B. Hansen, and K. W. Jacobsen. Partly occupied wannier functions. Phys. Rev. Lett., 94:026405, Jan 2005.
  27. [27]Pietro F. Fontana, Ask H. Larsen, Thomas Olsen, and Kristian S. Thygesen. Spread-balanced wannier functions: Robust and automatable orbital localization. Phys. Rev. B, 104:125140, Sep 2021.DOI
  28. [28]Gerd Berghold, Christopher J. Mundy, Aldo H. Romero, Jürg Hutter, and Michele Parrinello. General and efficient algorithms for obtaining maximally localized wannier functions. Phys. Rev. B, 61:10040–10048, Apr 2000.DOI
  29. [29]Anil Damle, Antoine Levitt, and Lin Lin. Variational formulation for wannier functions with entangled band structure. Multiscale Modeling & Simulation, 17(1):167–191, 2019.arxiv.org/abs/1801.08572
  30. [30]Jeil Jung and Allan H. MacDonald. Accurate tight-binding models for the π bands of bilayer graphene. Phys. Rev. B, 89:035405, 2014.DOI
  31. [31]S. Fang, R. K. Defo, S. N. Shirodkar, S. Lieu, G. A. T ritsaris, and E. Kaxiras. Ab initio tight-binding hamiltonian for transition metal dichalcogenides. Phys. Rev. B, 92:205108, 2015.DOI
  32. [32]Ang-Yu Lu, Hanyu Zhu, Jun Xiao, Chih-Piao Chuu, Yimo Han, Ming-Hui Chiu, Chia-Chin Cheng, Chih-Wen Yang, Kung-Hwa Wei, Yiming Yang, Yuan Wang, Dimosthenis Sokratis, Dennis Nordlund, Peidong Yang, David A. Muller, Mei-Yin Chou, Xiang Zhang, and Lian-Jong Li. Janus monolayers of transition metal dichalcogenides. Nature Nanotechnology, 12:744–749, 2017.DOI
  33. [33]Jing Zhang, Shuai Jia, Iskandar Kholmanov, Liang Dong, Dequan Er, Weibing Chen, Hua Guo, Zehua Jin, Vivek B. Shenoy, Li Shi, and Jun Lou. Janus monolayer transition-metal dichalcogenides. ACS Nano, 11:8192–8198, 2017.arxiv.org/abs/1704.06389
  34. [34]Wenwu Shi and Zhiguo Wang. Mechanical and electronic properties of janus monolayer transition metal dichalcogenides. J. Phys.:Condens. Matter, 30:215301, 2018.DOI
  35. [35]M. D. Stiles. Generalized slater-koster method for fitting band structures. Phys. Rev. B, 55:4168, 1997.DOI
  36. [36]Q. H. Wang, K. Kalantar-Zadeh, A. Kis, J. N. Coleman, and M. S. Strano. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides. Nat. Nano., 7:699–712, 2012.DOI
  37. [37]P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. Buongiorno Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. Dal Corso, S. de Gironcoli, P. Delugas, R. A. DiStasio Jr, A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J Jia, M. Kawamura, H.-Y. Ko, A. Kokajl, E. Küçükbenli, M .Lazzeri, M. Marsili, N. Marzari, F. Mauri, N. L. Nguyen, H.-V. Nguyen, A. Otero de-la Roza, L. Paulatto, S. Poncé, D. Rocca, R. Sabatini, B. Santra, M. Schl ipf, A. P. Seitsonen, A. Smogunov, I. Timrov, T. Thonhauser, P. Umari, N. Vast, X. Wu, and S. Baroni. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J. Phys.: Condens. Matter, 21:395502, 2009.
  38. [38]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, I. Dabo amd A. Dal Corso, S. Fabris, G. Fratesi, S. de Gironcoli, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sclauzero, A. P. Seitsonen, A. Smogunov, P. Umari, and R. M. Wentzcovitch. Advanced capabilities for materials modelling with QUANTUM ESPRESSO. J. Phys.: Condens. Matter, 29:465901, 2017.
  39. [39]J. P. Perdew, K. Burke, and M. Ernzerhof. Generalized gradient approximation made simple. Phys. Rev. Lett., 77:3865, 1996.pubmed.ncbi.nlm.nih.gov/10062328
  40. [40]D. R. Hamann. Optimized norm-conserving vanderbilt pseudopotentials. Phys. Rev. B, 88:085117, 2013.DOI
  41. [41]M. J. van Setten, M. Giantomassi, E. Bousquet, M. J. Verstraete, D. R. Hamann, X. Gonze, and G.-M. Rignanese. The pseudodojo: Training and grading a 85 element optimized norm-conserving pseudopotential table. Comput. Phys. Commun., 226:39–54, 2018.DOI
  42. [42]Leonard Kleinman. Relativistic norm-conserving pseudopotential. Phys. Rev. B, 21:2603, 1980.DOI
  43. [43]Giovanni B. Bachelet and M. Schlüter. Relativistic norm-conserving pseudopotentials. Phys. Rev. B, 25:2103, 1982.DOI
  44. [44]Nicola Marzari, David Vanderbilt, Alessandro De Vita, and M. C. Payne. Thermal contraction and disordering of the al(110) surface. Phys. Rev. Lett., 82:3296, 1999.DOI
  45. [45]Giovanni Pizzi, Valerio Vitale, Ryotaro Arita, Stefan Blügel, Frank Freimuth, Guillaume Géranton, Marco Gibertini, Dominik Gresch, Charles Johnson, Takashi Koretsune, Julen Ibañez-Azpiroz, Hyungjun Lee, Jae-Mo Lihm, Daniel Marchand, Antimo Marrazzo, Yuriy Mokrousov, Jamal I Mustafa, Yoshiro Nohara, Yusuke Nomura, Lorenzo Paulatto, Samuel Poncé, Thomas Pownseier, Junfeng Qiao, Florian Thöle, Stepan S. Tsirkin, Małgorzata Wierzbowska, Nicola Marzari, David Vanderbilt, Ivo Souza, Arash A. Mostofi, and Jonathan R. Yates. Wannier90 as a community code: new features and applications. J. Phys.: Condens. Matter, 32:165902, 2020.
  46. [46]Gui-Bin Liu, Wen-Yu Shan, Yugui Yao, Wang Yao, and Di Xiao. Three-band tight-binding model for monolayers of group-vib transition metal dichalcogenides. Phys. Rev. B, 88:085433, 2013.DOI
  47. [47]M. S. Dresselhaus, G. Dresselhaus, and A. Jorio. Group Theory: Application to the Physics of Condensed Matter. Springer-Verlag Berlin Heidelberg, 1 edition, 2008.
  48. [48]R. Sakuma. Symmetry-adapted wannier functions in the maximal localization procedure. Phys. Rev. B, 87:235109, Jun 2013.DOI
  49. [49]Takashi Koretsune. Construction of maximally-localized wannier functions using crystal symmetry. Computer Physics Communications, 285:108645, 2023.DOI
  50. [50]Symwannier. https://github.com/wannier-utils-dev/symWannier.
  51. [51]QuanSheng Wu, ShengNan Zhang, Hai-Feng Song, Matthias Troyer, and Alexey A. Soluyanov. Wanniertools: An open-source software package for novel topological materials. Computer Physics Communications, 224:405–416, 2018.
  52. [52]Guo-Xiang Zhi, Chenchao Xu, Si-Qi Wu, Fanlong Ning, and Chao Cao. Wannsymm: A symmetry analysis code for wannier orbitals. Computer Physics Communications, 271:108196, 2022.DOI
  53. [53]Wanniertools. http://www.wanniertools.com/.
  54. [54]Wannsymm. https://github.com/ccao/WannSymm.
  55. [55]Åke Björck. Numerical Methods for Least Squares Problems. Society for Industrial and Applied Mathematics, 1996.
  56. [56]John A. Nelder and R. Mead. A simplex method for function minimization. Computer Journal, 7 (4):308–313, 1965.DOI
  57. [57]Pauli Virtanen, Ralf Gommers, Travis E. Oliphant, Matt Haberland, Tyler Reddy, David Cournapeau, Evgeni Burovski, Pearu Peterson, Warren Weckesser, Jonathan Bright, Stéfan J. van der Walt, Matthew Brett, Joshua Wilson, K. Jarrod Millman, Nikolay Mayorov, Andrew R. J. Nelson, Eric Jones, Robert Kern, Eric Larson, C J Carey, Ilhan Polat, Yu Feng, Eric W. Moore, Jake VanderPlas, Denis Laxalde, Josef Perktold, Robert Cimrman, Ian Henriksen, E. A. Quintero, Charles R. Harris, Anne M. Archibald, Antônio H. Ribeiro, Fabian Pedregosa, Paul van Mulbregt, and SciPy 1.0 Contributors. SciPy 1.0: Fundamental Algorithms for Scientific Computing in Python. Nature Methods, 17:261–272, 2020.
  58. [58]Sten Haastrup, Mikkel Strange, Mohnish Pandey, Thorsten Deilmann, Per S Schmidt, Nicki F Hinsche, Morten N Gjerding, Daniele Torelli, Peter M Larsen, Anders C Riis-Jensen, Jakob Gath, Karsten W Jacobsen, Jens Jørgen Mortensen, Thomas Olsen, and Kristian S Thygesen. The computational 2d materials database: high-throughput modeling and discovery of atomically thin crystals. 2D Materials, 5(4):042002, sep 2018.DOI
  59. [59]Morten Niklas Gjerding, Alireza Taghizadeh, Asbjørn Rasmussen, Sajid Ali, Fabian Bertoldo, Thorsten Deilmann, Nikolaj Rørbæk Knøsgaard, Mads Kruse, Ask Hjorth Larsen, Simone Manti, Thomas Garm Pedersen, Urko Petralanda, Thorbjørn Skovhus, Mark Kamper Svendsen, Jens Jørgen Mortensen, Thomas Olsen, and Kristian Sommer Thygesen. Recent progress of the computational 2d materials database (c2db). 2D Materials, 8(4):044002, jul 2021.
  60. [60]Computational 2d materials database (c2db). https://cmr.fysik.dtu.dk/c2db/c2db.html.
  61. [61]Sejong Kim and Young-Woo Son. Quasiparticle energy bands and fermi surfaces of monolayer NbSe₂. Phys. Rev. B, 96:155439, 2017.DOI
  62. [62]Sejong Kim and Young-Woo Son. Dichotomy of saddle points in energy bands of monolayer NbSe₂. Phys. Rev. B, 104:045426, 2021.DOI
  63. [63]Kensuke Kurita and Takashi Koretsune. Systematic first-principles study of the on-site spin-orbit coupling in crystals. Phys. Rev. B, 102:045109, 2020.DOI
  64. [64]R. Cuadrado, R. Robles, A. García, M. Pruneda, P. Ordrejón, J. Ferrer, and Jorge I. Cerdá. Validity of the on-site spin-orbit coupling approximation. Phys. Rev. B, 104:195104, 2021.DOI
  65. [65]Di Xiao, Gui-Bin Liu, Wanxiang Feng, Xiaodong Xu, and Wang Yao. Coupled spin and valley physics in monolayers of MoS₂ and other group-vi dichalcogenides. Phys. Rev. Lett., 108:196802, 2012.DOI
  66. [66]Benjamin T. Zhou, Noah F. Q. Yuan, Hong-Liang Jiang, and K. T. Law. Ising superconductivity and majorana fermions in transition-metal dichalcogenides. Phys. Rev. B, 93:180501, 2016.DOI
  67. [67]B. A. McKinnon and T. C. Choy. Significance of nonorthogonality in tight-binding models. Phys. Rev. B, 52:14531, 1995.pubmed.ncbi.nlm.nih.gov/9980784
  68. [68]J. Dorantes-Dávila, A. Vega, and G. M. Pastor. Self-consistent theory of overlap interactions in the tight-binding method. Phys. Rev. B, 47:12995(R), 1993.pubmed.ncbi.nlm.nih.gov/10005510
  69. [69]Walter A. Harrison. Electronic structure and the properties of solids. Dover publications, Inc., New York, 1 edition, 1989.

Paper details

vlnc:W_sm33rvtc
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 4

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents