betaFeedback

WorksPhysics and Astronomy

Unified Mechanical Erosion Model for Multi-phase Mass Flows

Abstract

Erosion poses a great challenge in multi-phase mass flows as it drastically changes flow behavior and deposition pattern by dramatically increasing their masses, adversely affecting population and civil structures. There exists no mechanically-explained, unified multi-phase erosion model. We constitute a novel, unified and comprehensive mechanical erosion rates for solid and fluid phases and demonstrate their richness and urgency. This is achieved by seminally introducing interacting stresses across erosion-interface. Shear resistances from the bed against shear stresses from the landslide are based on consistent physical principles including frictional, collisional and viscous stresses. Proposed multi-phase interactive shear structures are mechanically superior and dynamically flexible. Total erosion rate is the sum of solid and fluid erosion rates which are mechanically extensive and compact. Erosion rates consistently take solid and fluid fractions from the bed and customarily supply to solid and fluid components in the flow. This overcomes severe limitations inherited by existing models. For the first time, we physically correctly construct composite, intricate erosion velocities of particle and fluid from the bed and architect the complete net momentum productions that include all interactions between solids and fluids in the landslide and bed. We invent stress correction, erosive-shear-velocity, super-erosion-drift and erosion-matrix characterizing erosion processes. By embedding well constrained extensive erosion velocities, unified erosion rates and net momentum productions including erosion-induced inertia into mass and momentum balances, we develop a novel, mechanically-explained, comprehensive multi-phase model for erosive mass flows. The new model offers great opportunities for practitioners in solving technical, engineering problems related to erosive multi-phase mass flows.

Introduction

Dynamics of geophysical mass flows including landslides, avalanches and debris flows can be dominantly affected by the complex mechanical processes of erosion, entrainment and deposition [27, 28, 65, 15, 16]. Here, the terms landslides, avalanches, debris flows and mass flows are used as synonyms. As these multi-phase flows cascade down mountain slopes the sediment and fluid are entrained from the bed. In turn, these events can disproportionately increase their volumes and destructive potentials by several orders of magnitude and become exceptionally mobile [22, 74, 69, 48, 42]. Erosion, entrainment and associated flow bulking in landslide prone areas and debris-flow torrents are a major concern for civil and environmental engineers and landuse planners. It requires a cost-intensive mitigation of the associated hazard. Mobility is among the most important features of the erosive landslide as it directly measures the threat posed by the landslide. Landslide mobility is associated with erosion-induced excessive volume and material properties and is characterized by an enormous impact force, exceptional travel distance and inundation area. Thus, erosion-induced excessive volume is a key control on the flow dynamics including the flow velocity, depth, travel distance and impact area, in turn affecting the number of fatalities [27, 22, 19] (Le and Pitman 2009). The spatially varying erosion rates and entrainment processes are dependent on the geomorphological, lithological and mechanical conditions [5, 63, 45, 17] (Iverson et al. 2011). A proper understanding of landslide erosion, entrainment and resulting increase in mass is a basic requirement for an appropriate modelling of landslide motion and its impact because the associated risk is directly related to the landslide momentum. However, as mechanical controls of erosion and entrainment are not well understood yet, despite large efforts in the recent years, evolving volume, mobility and impact forces of landslides and debris flows are often quite improperly estimated [17].

Recently, there has been a rapid increase in the studies of erosion and entrainment both in laboratory [21, 23, 15] (Iverson et al. 2011), and field scales [13, 14, 16]. Empirical [73, 64, 46, 10] (Le and Pitman 2009) and mechanical [23, 33] erosion models have been developed. Although by nature mass transports are multi-phase phenomena [56], most erosion models only consider effectively single-phase, or at most quasi two-phase flows [23, 46, 1, 33] (Le and Pitman 2009). Different numerical models incorporating erosion have been proposed [30, 46, 12, 24] (Le and Pitman 2009). However, the erosion rates presented and utilized therein are either not based on physical principles, or these are physically incomplete, because they do not consider all the complex mechanical interactions between the materials in the flow and the erodible bed. Moreover, these models are inconsistent, because they do not include the erosion-induced net momentum productions, and not all interactions across the erosion-interface are physically meaningfully considered [16, 54]. These physical shortcomings demand for a comprehensive and complete descriptions of the multi-phase erosion-entrainment process. This will become clearer in the model development section.

Erosion and deposition play an important role in mass transport and evolution of the landscape [27, 22, 17, 47]. However, our understanding of these processes is much below than needed to apply them to real events. Because of the complexity of the terrain and sporadic nature of the landslide events, the time and cost demands for their field measurements are high. Yet, these measurements are only discrete. This limits the scope and utility [16] of the available field data [5, 67, 45, 74, 17]. Physics-based advanced and comprehensive models [54], and sophisticated numerical simulations [56] can overcome these limitations aiming to facilitate a more complete understanding by investigating much wider aspects of the flow parameters, erosion, mobility and deposition [52, 47].

Pudasaini and Fischer [54] proposed a process-based erosion-deposition model for two-phase mass flows consisting of viscous fluid and solid particles, which, to a large extent, is capable of describing the complex erosive phenomena commonly observed in landslides, avalanches and debris flows. Their mechanical erosion-rate models proved that the effectively reduced friction (force) in erosion is equivalent to the momentum production. This shows that erosion can enhance the mass flow mobility. The importance of the Pudasaini and Fischer [54] mechanical erosion model for two-phase mass flows is widely realized in simulations of the real catastrophic multi-phase events [62, 68, 41, 47, 43] (Li et al. 2019). These modelling approaches have clearly indicated the need of the mechanical erosion model in appropriately simulating the actual flow dynamics, run-out, and deposition morphology based on the mechanical erosion rates and the erosion-induced momentum productions.

The Pudasaini and Fischer [54] two-phase model built a foundation for erosive mass flows by mechanically including the momentum production into the momentum balance equation. However, they did not include the inertia of the entrained mass and they could not present a clear mechanical condition for when and how the mobility of an erosive landslide will be enhanced or reduced and how to quantify it. So, their model appeared to be incomplete. Extending the Pudasaini and Fischer [54] model, Pudasaini and Krautblatter [52] addressed the important issue of erosion-induced landslide mobility by explicitly deriving mechanical conditions for the mobility of erosive landslides in terms of the erosion velocity of the mobilized bed material. They mechanically explained how and when erosive landslides enhance or reduce their mobility. This has been made possible by physically correctly considering the inertia and the momentum production of the erosive landslide. This model distinctly quantifies the mobility of an erosive landslide. Pudasaini and Krautblatter [52] revealed that the erosion velocity determines the energy budget of an erosive landslide and provides an accurate description of mobility. They identified a novel mechanism of landslide-propulsion providing the erosion-thrust to the landslide. They constructed the mobility scaling that precisely quantifies the contribution of erosion in landslide mobility. They also derived a set of dynamical equations in which the momentum balance correctly includes the erosion-induced change in inertia and the momentum production, together called the net momentum production. Their model constitutes a foundation for physically meaningful simulation of landslide motion with erosion. However, their model is only for effectively-single phase solid-type materials in the flow and in the bed. Also, the Pudasaini and Fischer [54] two-phase erosion model appeared to be incomplete, because it does not contain all natural interactions between phases across the erosion-interface, and requires fundamental enhancements to make it physically fully consistent and complete that follows the nature of erosive mass flows. This is what we achieve here with an innovative modelling approach.

Based on the Pudasaini and Fischer [54] and Pudasaini and Krautblatter [52] models, here, we develop a unified, consistent and complete mechanical erosion model for multi-phase mass flows. This is the first-ever model to do so. There are three major aspects of this contribution in relation to erosive multi-phase mass flows. i To physically correctly establish the jumps in shear stresses and momentum fluxes across the erosion-interface between the landslide and the bed substrate, and construct unified, comprehensive and consistent mechanical erosion rates for the solid and fluid phases. We propose multi-phase mechanically-described interactive shear structures containing all the interactions between different phases on either side of the erosion-interface between the flowing landslide and the erodible bed substrate. The sum of the solid and fluid erosion rates will be the total basal erosion rate, while the solid stresses include both the frictional and collisional stresses in an unified way. The new erosion rate models are broad, well defined and well constrained. ii To construct extensive and complete erosion-induced net momentum productions for both the solid and fluid phases. This is based on the physically correctly described novel complex erosion velocities of the mobilized particles and fluid from the basal substrate and the unified erosion rates. iii To develop a realistic and comprehensive multi-phase mechanical erosion model that includes the novel, unified mechanical erosion rates, extended erosion velocities and the advanced net momentum productions into the mass and momentum balance equations. As it includes different stress generating mechanisms; frictional, collisional and viscous; the new approach makes a complete description of the multi-phase erosive landslide by considering all the aspects associated with the erosion-induced momentum productions and the correct handling of the inertia while incorporating the net momentum productions. Moreover, the newly developed stress correction factor, erosive-shear-velocity, super-erosion-drift, and the erosion-matrix further highlight the importance of our modelling approach for the complex erosive multi-phase mass flows.

Model development for a unified multi-phase mechanical erosion rate

The mechanical principle of erosion is based on the jump in shear stresses and the jump in momentum fluxes across the erosion interface between the landslide and the bed materials ([23, 54]). So, the major task here is to physically correctly construct these two jump quantities and relate them to a unified mechanical erosion rate for a multi-phase mass flow. However, first, we justify the real need of the new modelling philosophy. Then, we proceed with constructing the unified erosion rate model for multi-phase mass flows.

Necessity of a unified and consistent multi-phase mechanical erosion rates, and net momentum productions

Pudasaini and Fischer [54] established a foundation of two-phase mechanical erosion model for mass flows. However, their model still requires a fundamental advancement in truly solving problems of erosive mass transports. For several reasons, a novel unified multi-phase mechanical erosion model is required: The sum of solid and fluid erosion rates must be the total erosion rate of the erodible bed substrate. All the interactions between the solids and fluids in the landslide and the bed substrate must be considered. All the shear resistances from the bed against all the applied shear stresses from the landslide must be mechanically explained, consistent and appropriate. We must completely model the essentially complex erosion velocities (velocities of the eroded particles and fluid from the basal substrate) and produce the correct net momentum productions. We must finally construct a comprehensive and unified mechanical model for multi-phase mass flows. These are explained below. To simplify the situation, consider the two-phase materials as an acceptable representation of multi-phase flows ([58]) in both the landslide and the bed consisting of frictional as well as collisional solid particles, and viscous fluid. However, the derived model can be extended to multi-phase erosive flows.

I. Consistency of the total basal erosion rate: Out of the total eroded material from the bed, the solid and fluid fractions must be consistently incorporated into the solid and fluid components in the moving material. However, this is a challenging problem that cannot be fixed with the existing two-phase mechanical erosion model ([54]). As the solid and fluid erosion rates in Pudasaini and Fischer [54]; the only existing two-phase erosion model; are developed independently, they do not include the basal solid and fluid volume fractions as multipliers. So, in technical applications, the values of solid and fluid erosion rates therein must be adjusted by choosing several parameters such that the solid and fluid fractions of the eroded material is added in a desired way to the solid and fluid components in the moving mass. Due to this constraint, in real flow situations, the sum of these erosion rates do not realistically correspond to the eroded material from the bed. Moreover, as the fluid erosion rate in Pudasaini and Fischer [54] model is a function of the fluid velocity, for fast flows, the fluid erosion rate can be unrealistically high, and in turn, the solid erosion rate can be unrealistically low. However, often, the selected model parameters cannot adjust the erosion rates that correspond to the material composition in the erodible bed. So, natural erosion rates that are inline with the events cannot be obtained from the independent solid and fluid erosion rates developed by Pudasaini and Fischer [54]. This poses a great problem in consistent and appropriate selection of physical parameters appearing in their erosion rate models. This demands for a unified erosion rate model such that the sum of the derived solid and fluid erosion rates automatically satisfies the required natural criterion of the total erosion rate without any need of adjustment. We will achieve this here by first developing the total mechanical erosion rate for the mixture, that can be uniquely and legitimately split in to the solid and fluid erosion rates, which inherently contain the respective solid and fluid volume fractions of the bed material. Then, the total erosion rate is consistently and exactly obtained by summing up the solid and the fluid erosion rates, removing the great hurdle in the Pudasaini and Fischer [54] erosion rates. This is exactly what is needed in technical applications.

II. All interactions between solids and fluids in the landslide and bed substrate: It is intuitively clear that there are four interactions between the solid and fluid phases in the landslide and the bed across the erosion-interface. These are: the solid-solid, solid-fluid, fluid-solid and fluid-fluid interactions. However, the Pudasaini and Fischer [54] two-phase erosion model only considers the direct phase-phase interactions, i.e., solid-solid and fluid-fluid interactions between the landslide and the bed, but ignores the cross-phase interactions, i.e., the solid-fluid, fluid-solid interactions. These interactions, though quite natural, are not yet recognized. This severely limits the applicability of existing models in simulating real multi-phase erosive events. We overcome this problem here by considering all phase-phase and cross-phase interactions.

III. Mechanically explained bed shear resistances against applied shear stresses from landslide: As there are four interactions between the solid and fluid phases, there must be four basal shear resistances against the four applied shear stresses from the landslide. As only solid-solid and fluid-fluid interactions are considered by Pudasaini and Fischer [54], there are two main shortcomings in their erosion rate modelling. First, the solid-solid shear stresses are modelled by applying the often used Coulomb-type frictional law. However, for the fluid-fluid interactions, classical Chezy-type friction law was applied, which as we will see later, is not appropriate. We eliminate this problem here by developing novel, mechanically appropriate fluid-fluid shear stress models. Second, the true solid-fluid and fluid-solid interactions were ignored by Pudasaini and Fischer (2020a). Nevertheless, these interactions are substantial and appear to be quite complex than our present state of knowledge. So, based on the Chezy-type friction law, here, we present largely novel, mechanical shear stress structure for the solid-fluid interaction.

IV. Complementing the frictional stress with the collisional stress for solid particles: For solid particles, we combine the Coulomb-type frictional law with the Bagnold-type collisional law, whereas the collisional stress includes some novel considerations. We also suggest some criteria to dynamically characterize the frictional and collisional flow regimes.

V. Complex erosion velocities and correct multi-phase net momentum productions: One of the most astonishing facts emerges here while dealing with the erosion velocities of the mobilized bed materials by the flow. As there are four phase-phase and cross-phase interactions between the solid and fluid materials in the landslide and the bed, erosion velocities for both the solid and fluid take extensive and complex forms. Consider the erosion velocity of a solid particle at the bed. This solid particle is pushed (sheared) and then mobilized by both the solid and fluid in the flow. However, Pudasaini and Fischer (2020a) considered the mobilization of the basal solid particle only by the solid from the flow, but ignored the other component of mobilization of this solid particle by the fluid in the landslide (mixture). The same is true for the erosion velocity of the fluid molecule at the bed. With these novel realizations, we constructed mechanically complex, comprehensive solid and fluid erosion velocities by considering all the mobilization components as applied by both the solid and fluid from the flow to the solid and fluid in the erodible bed (mixture). These will have huge implications in correctly describing net momentum productions, because the net momentum productions are functions of erosion velocities. This is very important, because, as we will see later, the net momentum production entirely controls the dynamics, mobility, impact energy and the deposition morphology of the mass transport. Moreover, the Pudasaini and Krautblatter (2021) erosion-induced landslide mobility model is only for effectively single-phase flows and only considers the single-phase net momentum production. However, as the real events are of multiphase nature, we must consistently extend the single-phase net momentum production to multi-phase net momentum productions, which however turn out to be quite elaborate.

VI. Comprehensive multi-phase erosion model: Limitations of the existing two-phase erosion model as exposed above in I - V demand for a consistent and complete multi-phase mechanical erosion model. This is achieved here by constructing a novel, unified mechanical erosion rates and momentum production models and embedding them into the dynamical model equations (mass and momentum balances). This paves the way for the legitimate use of the developed erosion models in applications, a monumental step forward in complex multi-phase mass flow simulations.

Definition of variables and parameters

For simplicity, first we consider a two-phase landslide (flow material) and a bed morphology consisting of viscous fluids and solid particles of different physical, mechanical and geometrical properties. Later we discuss how the derived models can be extended to multi-phase debris mixture and the erodible bed substrate. The two-phase mixtures with solid and fluid phases are indicated by the subscripts ss and ff. Let the physical and mechanical parameters and flow dynamical variables in the landslide mixture be denoted by the superscript mm and the erodible material in the bed be denoted by the superscript bb, respectively. Let u=(u,v)\mathbf{u}=(u,v) be the flow velocity, where uu and vv are the downslope (xx) and cross slope (yy) components. Furthermore, let α,ρ,u,μ\alpha,\rho,u,\mu and τ\tau denote the volume fraction, density, velocity, friction coefficient and the shear stress. Then, the mixture densities, velocities and the shear stresses on either sides of the erosion interface are given by (Pudasaini and Fischer, 2020b):

ρm=αsmρsm+αfmρfm,ρmum=αsmρsmusm+αfmρfmufm,τm=τsm+τfm,(1)\rho^{m}=\alpha_{s}^{m}\rho_{s}^{m}+\alpha_{f}^{m}\rho_{f}^{m},\quad\rho^{m}\mathbf{u}^{m}=\alpha_{s}^{m}\rho_{s}^{m}\mathbf{u}_{s}^{m}+\alpha_{f}^{m}\rho_{f}^{m}\mathbf{u}_{f}^{m},\quad\tau^{m}=\tau_{s}^{m}+\tau_{f}^{m}, \tag*{(1)}
ρb=αsbρsb+αfbρfb,ρbub=αsbρsbusb+αfbρfbufb,τb=τsb+τfb.(2)\rho^{b}=\alpha_{s}^{b}\rho_{s}^{b}+\alpha_{f}^{b}\rho_{f}^{b},\quad\rho^{b}\mathbf{u}^{b}=\alpha_{s}^{b}\rho_{s}^{b}\mathbf{u}_{s}^{b}+\alpha_{f}^{b}\rho_{f}^{b}\mathbf{u}_{f}^{b},\quad\tau^{b}=\tau_{s}^{b}+\tau_{f}^{b}. \tag*{(2)}

where the hold-ups αsm+αfm=1\alpha_s^m+\alpha_f^m=1 and αsb+αfb=1\alpha_s^b+\alpha_f^b=1 are satisfied. The quantities without subscripts are the total quantities associated with the mixtures, either in the flow (ρm\rho^m, umu^m, τm\tau^m) or in the bed (ρb\rho^b, ubu^b, τb\tau^b).

To connect the velocities at the lower level (denoted by ll) of the flow (landslide) and the erodible substrate to the mean flow velocities, following Pudasaini and Fischer [54], we define the following extended relations,

ulm=λlmum,ub=λbum,uslm=λslmusm,uflm=λflmufm,usfm=λsfmusm,ufsm=λfsmufm;u_l^m=\lambda_l^m u^m,\quad u^b=\lambda^b u^m,\quad u_{sl}^m=\lambda_{sl}^m u_s^m,\quad u_{fl}^m=\lambda_{fl}^m u_f^m,\quad u_{sf}^m=\lambda_{sf}^m u_s^m,\quad u_{fs}^m=\lambda_{fs}^m u_f^m;
ussb=λssbusm,uffb=λffbufm;ufsb=λfsbufm,usfb=λsfbusm,(3)u_{ss}^b=\lambda_{ss}^b u_s^m,\quad u_{ff}^b=\lambda_{ff}^b u_f^m;\quad u_{fs}^b=\lambda_{fs}^b u_f^m,\quad u_{sf}^b=\lambda_{sf}^b u_s^m, \tag*{(3)}

where, λlm\lambda_l^m, λb\lambda^b; λslm\lambda_{sl}^m, λflm\lambda_{fl}^m; λsfm\lambda_{sf}^m, λfsm\lambda_{fs}^m; λssb\lambda_{ss}^b, λffb\lambda_{ff}^b; λfsb\lambda_{fs}^b, λsfb\lambda_{sf}^b are called the erosion drifts, and their mechanical closures are determined at § 3.1.3 by the erosion-drift equations. These erosion drifts are positive numbers, and are bounded from above by unity. The relations in (3) are needed while deriving erosion (basal) velocities (see below), shear stresses (§ 2.4), erosion rates or mass productions (§ 3) and momentum productions (§ 4). The origin and use of the double subscripts (ssss, sfsf, fsfs, ffff) for the phase interactions has been explained below and at § 2.3 and § 2.4. In (3) usfmu_{sf}^m is the velocity of the solid at the base of the landslide as it is in contact with the fluid at the bed. Similar definition applies for ufsmu_{fs}^m. Although there are ten erosion drifts in (3), which we had to define for formal reasons, only few of them are independent (and needed) which can be modelled or described relatively easily as functions of known relevant bed inertial numbers (associated effective density ratios, Pudasaini and Krautblatter [52]), as we will see at § 3.1.3. Because, only very few of the erosion drifts will be needed in the final model equations, and simple mechanical closures are developed for all of them, there is absolutely no agnst. Note that λm\lambda^m, λb\lambda^b are associated with the total mixtures, and λslm\lambda_{sl}^m, λflm\lambda_{fl}^m, λsfm\lambda_{sf}^m, λfsm\lambda_{fs}^m, λssb\lambda_{ss}^b, λffb\lambda_{ff}^b and λfsb\lambda_{fs}^b, λsfb\lambda_{sf}^b are associated with the solid and fluid phases (separately, or in combination) in the landslide and bed. These will be clearer in due courses. In Pudasaini and Fischer [54] only λslm\lambda_{sl}^m, λflm\lambda_{fl}^m, λssb\lambda_{ss}^b, λffb\lambda_{ff}^b appear, but in reduced form, without any cross-phase interactions across the erosion-interface, limiting the applicability of their model.

Solid and fluid erosion velocities

In (1), (2) and (3) all the velocities uu with the superscript bb are the erosion velocities, i.e., they are the velocities of the eroded materials, or are associated with the erosion velocities of the mobilized materials from the bed. For mixture materials, however, the erosion velocities of the solid particle and the fluid molecule at the bed are complex. There are four different interactions between the particles and fluid in the flow and the bed. For this reason, we introduced four double subscripts for the erosion velocities, similarly for the shear stresses and shear resistances (§ 2.4), namely the solid-solid (ssss), solid-fluid (sfsf), fluid-solid (fsfs), and fluid-fluid (ffff) interactions. This is so, because the solid particle at the bed is sheared (pushed) by both the solid and fluid at the base of the flow (landslide). It means, the solid erosion velocity usbu_s^b has two components. It is jointly induced by the pushing of the solid from the landslide, which we denote by ussbu_{ss}^b, and by the pushing of the fluid from the landslide, which we denote by ufsbu_{fs}^b, respectively. Similarly, the fluid molecule at the bed is also sheared (pushed) by both the solid and fluid at the base of the flow which are denoted by the components usfbu_{sf}^b and uffbu_{ff}^b. However, the basal velocity components ussbu_{ss}^b and ufsbu_{fs}^b for solid are induced by the solid and fluid fractions αsm\alpha_s^m and αfm\alpha_f^m in the flowing mixture, because the solid particles at the bed are pushed by both the solid and fluid at the base of the flow. This is an important realization. The same is true for the fluid erosion velocity components usfbu_{sf}^b and uffbu_{ff}^b as the fluid molecules at the bed are pushed by both the solid and fluid at the base of the flow. So, as invented here, the solid and fluid erosion velocities take their complex forms:

References

  1. [1]Armanini, A., Fraccarollo, L., Rosatti, G. (2009): Two-dimensional simulation of debris flows in erodible channels. Comput. Geosci. 35, 993-1006.
  2. [3]Baselt, I., de Oliveira, G.Q., Fischer, J.-T., Pudasaini, S.P (2021): Evolution of stony debris flows in laboratory experiments. Geomorphology 372, 107431. https://doi.org/10.1016/j.geomorph.2020.107431.
  3. [4]Beavers, G.S., Joseph, D.D. (1967): Boundary conditions at a naturally permeable wall. J. Fluid Mech. 30, 197-207.DOI
  4. [5]Berger, C., McArdell, B.W., Schlunegger, F. (2011): Direct measurement of channel erosion by debris flows, Illgraben, Switzerland. J. Geophys. Res. Earth Surf. 116, F01002.DOI
  5. [6]Berzi, D., Fraccarollo, L. (2015): Turbulence locality and granular like fluid shear viscosity in collisional suspensions. Phys. Rev. Lett. 115, 194501.
  6. [9]Chandesris, M., Jamet, D. (2006): Boundary conditions at a planar fluid-porous interface for a Poiseuille flow. Int. J. Heat Mass Transfer. 49, 2137-2150.DOI
  7. [10]Chen, H., Crosta, G.B., Lee, C.F. (2006): Erosional effects on runout of fast landslides, debris flows and avalanches: a numerical investigation. Geotechnique 56, 305-322.DOI
  8. [11]Chow, V.T. (1959): Open-channel hydraulic. McGraw-Hill Book Company Inc., New York.
  9. [12]Christen, M., Kowalski, J., Bartelt, P. (2010): RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain. Cold Reg Sci. Technol. 63, 1-14.DOI
  10. [13]Cuomo, S., Pastor, M., Cascini, L., Castorino, G. C. (2014): Interplay of rheology and entrainment in debris avalanches: a numerical study. Can. Geotech. J. 51, 1318-1330.DOI
  11. [14]Cuomo, S., Pastor, M., Capobianco, V., Cascini, L. (2016): Modelling the space time evolution of bed entrainment for flow-like landslides. Eng. Geol. 212, 10-20.DOI
  12. [15]de Haas, T., van Woerkom, T. (2016): Bed scour by debris flows: experimental investigation of effects of debris flow composition. Earth Surf. Process. Landf. 41, 1951-1966.DOI
  13. [16]de Haas, T., Nijland, W., de Jong, S.M., McArdell, B.W. (2020): How memory effects, check dams, and channel geometry control erosion and deposition by debris flows. Sci. Rep.10, 14024.DOI
  14. [17]Dietrich, A., Krautblatter, M. (2019): Deciphering controls for debris-flow erosion derived from a liDAR-recorded extreme event and a calibrated numerical model (Rossbichlebach, Germany). Earth Surf. Process. Landf. 44, 1346-1361.
  15. [18]Domnik, B., Pudasaini, S.P., Katzenbach, R., Miller, S.A. (2013): Coupling of full two-dimensional and depth-averaged models forgranular flows. Journal of Non-Newtonian Fluid Mechanics 201, 56-68.DOI
  16. [19]Dowling, C.A., Santi, P.M. (2014): Debris flows and their toll on human life: a global analysis of debris-flow fatalities from 1950 to 2011. Nat. Hazards 71, 203-227.
  17. [21]Egashira, S., Honda, N., Itoh, T. (2001): Experimental study on the entrainment of bed material into debris flow. Phys. Chem. Earth (C.) 26, 645-650.
  18. [22]Evans, S.G., Bishop, N.F., Smoll, L.F., Murillo, P.V., Delaney, K.B., Oliver-Smith, A. (2009): A re-examination of the mechanism and human impact of catastrophic mass flows originating on Nevado Huascaran, Cordillera Blanca, Peru in 1962 and 1970. Eng. Geol. 108,96-118.
  19. [23]Fraccarollo, L., Capart, H. (2002): Riemann wave description of erosional dam-break flows. J. Fluid Mech. 461, 183-228.DOI
  20. [24]Frank, F., McArdell, B. W., Huggel, C. Vieli, A. (2015): The importance of entrainment and bulking on debris flow runout modeling: examples from the Swiss Alps. Nat. Hazards Earth Syst. Sci.15, 2569-2583.
  21. [25]Hanes, D.M., Inman, L. (1985): Observations of rapidly flowing granular-fluid mixtures. J. Fluid Mech. 150, 357-380.DOI
  22. [26]Hsu, L., Dietrich, W.E., Sklar, L.S. (2008): Experimental study of bedrock erosion by granular flows. Journal of Geophysical Research 113, F02001. https://doi.org/10.1029/2007JF000778.
  23. [27]Huggel, C., Zgraggen-Oswald, S., Haeberli, W., Kääb, A., Polkvoj, A., Galushkin, I., Evans, S.G. (2005): The 2002 rock/ice avalanche at Kolka/Karmadon, Russian Caucasus: assessment of extraordinary avalanche formation and mobility, and application of QuickBird satellite imagery. Nat. Hazards Earth Syst. Sci. 5, 173-187.
  24. [28]Hungr, O., McDougall, S., Bovis, M. (2005): In Debris-Flow Hazards and Related Phenomena(eds. Jakob, M. & Hungr, O.) (Springer, Berlin).DOI
  25. [29]Hungr, O. (1995): A model for the runout analysis of rapid flow slides, debris flows, and avalanches. Can. Geotechn. J. 32, 610-623.DOI
  26. [30]Iverson, R.M., Ouyang, C. (2015): Entrainment of bed material by earth-surface mass flows: review and reformulation of depth-integrated theory. Rev. Geophys. 53, 27-58.DOI
  27. [31]Iverson, R.M., George, D.L. (2014): A depth-averaged debris-flow model that includes the effects of evolving dilatancy. I. Physical basis. Proc. Royal Soc A, 470, 20130819,https://doi.org/10.1098/rspa.2013.0819.
  28. [33]Iverson, R.M. (2012): Elementary theory of bed-sediment entrainment by debris flows and avalanches. J. Geophys. Res.117, F03006.DOI
  29. [34]Iverson, R.M. (1997): The physics of debris flows. Reviews of Geophysics 35, 245-296.DOI
  30. [35]Jones, I.P. (1973): Low Reynolds number flow past a porous spherical shell. Proc. Camb. Phil. Sot. 73, 231-238.DOI
  31. [41]Liu, W., He, S. (2020): Comprehensive modelling of runoff-generated debris flow from formation to propagation in a catchment. Landslides. https://doi.org/10.1007/s10346-020-01383-w.
  32. [42]Liu, W., Wang, D., Zhou, J. He, S. (2019): Simulating the Xinmo landslide runout considering entrainment effect. Environ. Earth Sci.78, 585.DOI
  33. [43]Liu, W., Yang, Z., He, S. (2021): Modeling the landslide-generated debris flow from formation to propagation and run-out by considering the effect of vegetation. Landslides 18,43-58.DOI
  34. [44]McArdell, B.W., Bartelt, P., Kowalski, J. (2007): Field observations of basal forces and fluid pore pressure in a debris flow. Geophysical Research Letters 34, L07406. https://doi.org/10.1029/2006GL029183.
  35. [45]McCoy, S.W., Kean, J.W., Coe, J.A., Tucker, G.E., Staley, D.M., Wasklewicz, T.A. (2012): Sediment entrainment by debris flows: In situ measurements from the headwaters of a steep catchment. J. Geophys. Res. 117, F03016, doi:10.1029/2011JF002278.DOI
  36. [46]McDougall, S., Hungr, O. (2005): Dynamic modelling of entrainment in rapid landslides. Can. Geotech. J. 42, 1437-1448.DOI
  37. [47]Mergili, M., Jaboyedoff, M., Pullarello, J., Pudasaini, S.P. (2020): Back calculation of the 2017 Piz Cengalo - Bondo landslide cascade with r.avaflow: what we can do and what we can learn. Nat. Hazards Earth Syst. Sci. 20, 505-520.DOI
  38. [48]Mergili, M., Emmer, A., Juricova, A., Cochachin, A., Fischer, J.-T., Huggel, C., Pudasaini, S.P. (2018): How well can we simulate complex hydro-geomorphic process chains? The 2012 multi-lake outburst flood in the Santa Cruz Valley (Cordillera Blanca, Peru). Earth Surf. Proc. Land. 43, 1373-1389.DOI
  39. [49]Ness, C., Sun, J. (2015): Flow regime transitions in dense non-Brownian suspensions: Rheology, microstructural characterization, and constitutive modeling. Physical Review E 91, 012201.pubmed.ncbi.nlm.nih.gov/25679613
  40. [50]Nield, D.A. (2009): The Beavers-Joseph boundary condition and related matters: a historical and critical note. Transport in porous media 78, 537-540.DOI
  41. [51]Ouyang, C., He, S., Tan, C. (2015): Numerical analysis of dynamics of debris flow over erodible beds in Wenchuan earthquake-induced area. Engineering Geology, 62-72.DOI
  42. [52]Pudasaini, S.P., Krautblatter, M. (2021): The mechanics of landslide mobility with erosion. Nat Commun 12, 6793. https://doi.org/10.1038/s41467-021-26959-5.
  43. [54]Pudasaini, S.P., Fischer, J.-T. (2020a): A mechanical erosion model for two-phase mass flows. Int. J. Multiph. Flow. 132, 103416.DOI
  44. [55]Pudasaini, S.P. (2020): A full description of generalized drag in mixture mass flows. Engineering Geology 265, 105429.DOI
  45. [56]Pudasaini, S.P., Mergili, M. (2019): A multi-phase mass flow model. Journal of Geophysical Research: Earth Surface, 124, 2920-2942.DOI
  46. [57]Pudasaini, S.P. (2019): A fully analytical model for virtual mass force in mixture flows. International Journal of Multiphase Flow 113, 142-152.DOI
  47. [58]Pudasaini, S.P. (2012): A general two-phase debris flow model. J. Geophysics. Res. 117, F03010.
  48. [60]Pudasaini, S.P., Hutter, K. (2007): Avalanche Dynamics: Dynamics of Rapid Flows of Dense Granular Avalanches. Springer, Berlin, New York.
  49. [61]Pudasaini, S.P., Y. Wang, Y., Hutter, H. (2005): Modelling Debris Flows Down General Channels. Nat. Hazards Earth Syst. Sci. 5, 799-819.DOI
  50. [62]Qiao, C., Ou, G., Pan, H. (2019): Numerical modelling of the long runout character of 2015 Shenzhen landslide with a general two-phase mass flow model. Bull.Eng. Geol. Environ. 78, 3281-3294.DOI
  51. [63]Reid, M.E., Iverson, R.M., Logan, M., Lahusen, R.G., Godt, J.W., Griswold, J.P. (2011): Entrainment of bed sediment by debris flows: results from large-scale experiments. Italian J. Eng. Geol. Env., doi: 10.4408/IJEGE.2011-03.B-042.DOI
  52. [64]Rickenmann, D., Weber, D., Stepanov, B. (2003): In Debris-Flow Hazards Mitigation: Mechanics, Prediction, and Assessment, 883-894 (eds Rickenmann, D., Chen, C., Millpress, Rotterdam, Netherlands).
  53. [65]Santi, P.M., de Wolfe, V.G., Higgins, J.D., Cannon, S.H., Gartner, J.E. (2008): Sources of debris flow material in burned areas. Geomorphology 96, 310-321.DOI
  54. [66]Savage, S.B., Sayad, M. (1984): Stresses developed by dry cohesionless granular materials sheared in an annular shear cell. J. Fluid Mech. 142, 391-430.DOI
  55. [67]Schürch, P., Densmore, A.L., Rosser, N.J., McArdell, B.W. (2011): Dynamic controls on erosion and deposition on debris-flow fans. Geology 39, 827-830.DOI
  56. [68]Shen, W., Li, T., Li, P., Berti, M., Shen, Y., Guo, J. (2019): two-layer numerical model for simulating the frontal plowing phenomenon of flow-like landslides. Engineering Geology 259, 105168. https://doi.org/10.1016/j.enggeo.2019.105168.
  57. [69]Somos-Valenzuela, M.A., Chisolm, R.E., Rivas, D.S., Portocarrero, C., McKinney, D.C. (2016): Modeling a glacial lake outburst flood process chain: the case of Lake Palcacocha and Huaraz, Peru. Hydrol. Earth Syst. Sci. 20, 2519-2543.
  58. [70]Song, P., Choi, C.E. (2021): Revealing the importance of capillary and collisional stresses on soil bed erosion induced by debris flows. Journal of Geophysical Research: Earth Surface 126, e2020JF005930. https://doi.org/10.1029/2020JF005930 .
  59. [71]Stock, J.D., Dietrich, W.E. (2006): Erosion of steepland valleys by debris flows. The Geological Society of America Bulletin 118, 1125-1148. https://doi.org/10.1130/B25902.1.
  60. [72]Takahashi, T. (2007): Debris Flow: Mechanics, Predictions and Counter Measures, Taylor and Francis, New York.
  61. [73]Takahashi, T., Kuang, S.F. (1986): Formation of debris flow on varied slope bed. Disas. Prev. Res. Inst. Annu. B29, 343-359.
  62. [74]Theule, J.I., Liebault, F., Laigle, D., Love, A., Jaboyedoff, M. (2015): Channel scour and fill by debris flows and bedload transport. Geomorphology 243, 92-105.DOI

Paper details

vlnc:W_sn7pjzgu
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents