WorksPhysics and Astronomy
Effect of symmetry breaking on altermagnetism in CrSb and Formation of fragmented nodal curves
Abstract
Phenomena concerning altermagnets have opened up a window for unconventional analysis of the momentum space spin polarization (MSSP) of antiferromagnetic materials. Taking the example of one of the widely investigated altermagnets, CrSb, we explore the underlying mechanisms leading to the formation or breaking of altermagnetism. With the aid of DFT calculation and symmetry analysis, we study the behavior of MSSP in the altermagnetic bands of pristine CrSb, along with a few model structures designed from the pristine one by hypothetical vacancy engineering and interstitial doping. We show that the six-fold rotational symmetry of the pristine CrSb can be reduced to a two-fold rotational symmetry via vacancy and doping engineering. We discover the formation of fragmented nodal curves (FNCs) across the Brillouin zone when in an altermagnetic material when the symmetry is restricted to two-fold rotation. Unlike the typical nodal planes and axes, the location of the FNCs in the momentum space is found to be band-specific. The formation of FNCs is further validated by introducing uniaxial strain to CrSb and by examining the band structure of RbMnPO, as they both exhibit a two-fold rotational symmetry responsible for altermagnetism. We observe that, unlike the pristine case, these FNCs have the potential to manifest anomalous Hall conductivities (AHC), while the Néel vector orients along both in-plane and out-of-plane directions. This flexibility of the AHC will pave the way for the application of altermagnets in the futuristic quantum devices.
Introduction
Altermagnetism [1, 2, 3, 4], a third type of magnetic phase, is defined by the splitting of the otherwise degenerate antiferromagnetic sub-bands in the momentum space outside certain nodal planes. The split, often referred to as altermagnetic spin splitting (AMSS), which resembles the time reversal symmetry breaking as in ferromagnets, is equal and opposite on either side of the nodal plane and axis to ensure zero magnetization when integrated over the whole Brillouin zone (BZ) as in an antiferromagnet (AFM). Being purely a non-relativistic quantum phenomenon, with unconventional momentum space spin polarization (MSSP) that deviates from both classical ferromagnets and AFMs, altermagnets have the potential to open up non-trivial routes for quantum transport in the field of spintronics [5, 6, 7].
Among the most investigated altermagnets, prominent ones include the NiAs prototype transition-metal-based alloys such as MnTe [8, 9, 10, 11], CrSb [12, 13, 14, 15], and NiS [16]. These high-symmetry compounds, which stabilize in the hexagonal P6₃/mmc phase, are either correlated insulators or simple metals and exhibit a large AMSS of the order of 1 eV. Furthermore, doping and defects can lead to quasi-altermagnetism with uncompensated magnetization [17] as well as finite anomalous Hall conductivity (AHC) [18, 19]. Therefore, these compounds provide an appropriate platform to study the underlying mechanisms responsible for forming the altermagnetism and tailoring the latter by designing several symmetry-breaking model structures. We pursued this objective in this work by taking CrSb as the example system.
CrSb exhibits many intriguing properties other than altermagnetism. In the bulk phase, it has a large magnetocrystalline anisotropy energy (MAE) [20], which is desirable for storing information. The MAE of CrSb is reduced in the thin films [21], which helps in manipulating the Néel vector and, thereby, AHC through magnetic proximity. The reorientation of the Néel vector can also be achieved using strain, electric field, doping, or voltage [22, 23, 24], and it is an emerging topic as this is identified as one of the routes to induce tunable anomalous Hall [25, 26] and Nernst conductivities [27, 28]. Additionally, it exhibits moderate energy barriers between its altermagnetic, ferromagnetic, and ferroelectric phases [29] making it more flexible for multiferroic spintronics.
Furthermore, a recent study shows that breaking the crystal and magnetic symmetry using doping or strain can be employed to tune the unconventional spin Hall effect, allowing for possible applications in various spintronics [30]. In addition, the coexistence of topological order and altermagnetism is being actively investigated in CrSb. From the ARPES data, it is shown that the large AMSS induces altermagnetic Weyl nodes and topological Fermi arcs, which suggests robust electronic topology in this compound [31]. Reports suggest that by utilizing laser-induced ultrafast demagnetization on CrSb, promising applications in ultrafast spintronics can be realized [32].
In this work, we have carried out first-principles electronic structure calculations on pristine and strained CrSb, and derived hypothetical model structures (MSs) where vacancies and interstitial doping are done at the non-magnetic sites to alter the chemical bonding and thereby to break the symmetry of charge and spin distributions. This allows us to study the evolution of MSSP of the bands with change in the symmetry.
The MSs allowed us to explore how variations in the doping concentration of non-magnetic atoms alter the local spin moment (LSM) of the system, subsequently impacting the AMSS in reciprocal space. We observed that systems with improper rotation, such as , create similar AMSS as those formed by proper rotation . This phenomenon has been discussed and mathematically proven in the non-relativistic limit (NRL) for pristine CrSb. An interesting fundamental phenomenon occurs when the symmetry is lowered from to . Most remarkably, in this process, the three diagonal nodal planes vanish, and fragmented nodal curves (FNCs) emerge. Along the FNC, the spin-opposite sublattice pair bands are degenerate; elsewhere, they are non-degenerate. For each pair of bands, we observe different FNCs. The lowering in symmetry also allows tuning the Néel vector orientations and realizing a finite AHC both in-plane and out-of-plane. In practice, this can be achieved by uniaxial straining of CrSb.
Structural and Computational Details
CrSb belongs to the space group and displays a structural similarity to hexagonal NiAs, as shown in Figure 1 (a). It crystallizes with a two formula unit cell (CrSb). Its magnetic ordering follows the magnetic space group (MSG) of , with its Néel vector oriented along the easy axis, i.e. -axis. In the NRL, the spin space group (SSG) [33, 34, 35, 36, 37, 38] notation will be according to [39], which have been followed throughout this article. Cr and Sb occupy the Wyckoff positions 2a and 2c with the and site symmetry [40], respectively. The opposite spin sublattices form face-shared octahedra as shown in Figure 1 (g) with a Cr-Sb bond length of 2.74 Å and Sb-Cr-Sb(Sb′) angles of 97.36°(82.64°). In this hexagonal crystal structure, eight interstitial voids are present. Notably, the centers of two of these voids are occupied by the Sb atom.

Figure 1. The effect of vacancy engineering and interstitial doping on altermagnetism in CrSb. The top row depicts the crystal structure of (a) pristine CrSb, (b) vacancy-induced configuration CrSb (MS-I), and (c) various doping configurations, such as (d) CrSb (MS-II) and (e-g) CrSb (MS-III, MS-IV, and MS-V, respectively). The second row schematically illustrates symmetry operations of the spin space group required to define an altermagnet and its nodal planes. The upper subrow indicates the presence of symmetry between two opposite spin sublattices in all configurations, leading to a basal nodal plane, while the lower subrow represents the improper rotation symmetries that define altermagnetism and corresponding diagonal nodal planes (see Figure 2 (a)). (g) Pristine CrSb has a six-fold screw, and (h, i) MS-I, MS-II have a six-fold rotoinversion symmetry, which creates altermagnetism with three diagonal nodal planes. For (j) MS-III and (k) MS-IV, although there exist a six-fold and two-fold screw, the presence of an inversion centre (I, represented by a black dot) between two opposite spin sublattices forces them to be antiferromagnet. (l) Most intriguingly, MS-V has a two-fold screw, which manifests a non-trivial nodal curve, which we call the fragmented nodal curve. The bottom row represents the altermagnetic (m-o, r) and antiferromagnetic (p, q) band structure of the respective crystal structure of the same column along the high symmetric -path L--L.
The two spin-opposite sublattices are connected via and symmetry operations Figure 1 (g) giving rise to the 4 nodal planes in the BZ passing through Γ [16]. One of them is the basal plane, and the other three nodal planes are perpendicular to it, making an angle of with each other. The algebraic equations of these planes are (i) , (ii) , (iii) , and (iv) as shown in Figure 2 (a), written in terms of the hexagonal coordinate system. In the symmetry operation notation , the operation on the left (right) side of “” operates on spin space (real space), i.e., is two fold rotation in spin space, while is six fold rotation about -axis followed by translation and is a mirror operation with respect to plane in the real space.

Figure 2. Schematic illustration of various altermagnetic nodal planes present in pristine CrSb, MS-I, and MS-II. (a) represents one basal nodal plane and three diagonal nodal planes, and (b) represents the high symmetry k-points and k-path in this Brillouin zone.
To investigate the magnetic and electronic structure of the system, Density Functional Theory (DFT) was employed utilizing the plane-wave based projector augmented wave (PAW) [41, 42] method as implemented within the Vienna ab-initio simulation package (VASP) [43]. The Perdew–Burke–Ernzerhof generalized gradient approximation (GGA) [44] was employed for the exchange-correlation functional. A Γ-centered k-mesh of 12 × 12 × 6 was utilized for the integration of Brillouin zones (BZ). The kinetic energy cutoff for the plane wave basis set was determined to be 500 eV. For the calculation of RbMnPO, a dense Γ-centered k-mesh grid of 6 × 9 × 6 was employed with an energy cutoff value of 500 eV. The strong correlation effects for RbMnPO were accounted for using the DFT + method with the effective Hubbard parameter eV in the rotationally invariant functional framework as provided by Dudarev [45].
To calculate the AHC, first-principles calculations were performed within the framework of Quantum ESPRESSO [46] using norm-conserving pseudopotentials [47] by incorporating spin orbit coupling. Maximally localized Wannier functions, obtained using the Wannier90 code, [48], were employed to construct the tight-binding Hamiltonian. The anomalous Hall conductivity was then obtained by using the WannierBerri code [49].
Model Structures and Associated Symmetries
In order to understand the effect of vacancy and interstitial doping on altermagnetism, we have created five MSs out of the pristine crystal structure by adding and removing non-magnetic atoms. The last three, from MS-III to MS-V, are volume relaxed to prevent the Sb atoms from overlapping. In the following paragraphs, we have discussed the crystal structure in details of each MS and summarized the lattice parameters and their SSG in Table I.
Model structure - I (CrSb): In this MS, one of the Sb atoms is removed, as shown in Figure 1 (b), to create a crystal system with formula unit CrSb. The new space group is , and Cr and Sb have Wyckoff positions 2g and 1f, respectively. Here, we have 3m. and site symmetry for Cr and Sb, respectively. The SSG notation for the system is . The two magnetic sublattices are connected via and symmetry as shown in Figure 1 (g). is 6-fold roto-inversion, which is a 6-fold rotation followed by an inversion.
Model structure - II (CrSb): In these hypothetical structures we have occupied one more void with an additional Sb atom. The separation distance between two nearest neighbors is Å and between two second neighbors, it is Å. The latter looks more feasible with an additional Sb atom, and there are three possible identical arrangements to create the compound CrSb. One of them is shown in Figure 1 (c), which forms this MS. The primitive cell of CrSb falls under space group and SSG , having Cr occupying 2g and three Sb occupying 1c, 1d, and 1f Wyckoff positions. Like CrSb system, the opposite spin the sublattices for CrSb shown in the Figure 1 (o) are also connected via and symmetry.
Model structure - III and IV (CrSb): By placing one more Sb in a second neighbor hexagonal center, one can form the compound CrSb. There are two such possible arrangements, MS-III and MS-IV, as shown in Figure 1 (d) and (e), respectively. MS-III is associated with the space group and SSG . In this model, Cr and Sb occupy 1a and 2d Wyckoff positions showing 6/mmm and site symmetry, respectively. The spin opposite sublattices can be connected via
tively. The spin opposite sublattices can be connected via the inversion center shown using a black dot in Figure 1 (j). Based on the standard symmetry, it should not exhibit altermagnetism.
The primitive cell of MS-IV follows the space group Cmmm and SSG . The Cr occupies the 4k, and Sb occupies the 4h and 4i Wyckoff positions. Here, the 4k site has mm2 site symmetry, while the 4h and 4i sites have 2mm and m2m site symmetry. Similar to the previous case, the two opposite spin sublattices for this system can also be connected via an inversion center (I) identified in Figure 1 (k) by a black dot, turning this into a pure antiferromagnetic system.
Model structure - V (CrSb): In this model structure, we have maintained the formula unit CrSb and placed the Sb atoms in two nearest neighbor hexagonal center positions, as shown in Figure 1 (f). The structure is associated with space group P2/m and SSG P2/−1m∞m1. The Cr and Sb here occupy the 2a and 2e Wyckoff positions, maintaining and m site symmetry. The spin opposite sublattices for this case are not connected via any inversion or translation symmetry. From Figure 1 (q) it is clear that the opposite spin sublattices are related via [C∥M] and [C∥Ct] symmetry creating the distinct AMSS type splitting in the BZ.
| Structure | (Å) | (Å) | SSG |
| CrSb / CrSb | 4.11 | 5.45 | |
| MS-I | 4.11 | 5.45 | |
| MS-II | 4.11 | 5.45 | |
| MS-III | 6.18 | 7.10 | |
| MS-IV | 6.18 | 7.10 | |
| MS-V | 6.18 | 7.10 |
Table 1. Magnetic space group (MSG), lattice parameters, and corresponding spin space group (SSG) for pristine CrSb and the five magnetic structures (MS) with the Néel vector along the axis.
Electronic Structure
The evolution of the antiferromagnetic band structure with change in the symmetries as devised in the MS-I to MS-V is the focus of this section. To start with, we briefly summarize the electronic structure of pristine CrSb, which has been discussed in great detail in the past [12, 15]. As shown in Figure 1 (m), the ground state of CrSb exhibits altermagnetic band structure with equal and opposite AMSS on either side of one of the diagonal nodal planes. The constant energy surfaces plotted in Figure 3 from different perspectives demonstrate the presence of the four nodal planes emerging from the mirror (M) and roto-translation (Ct). Despite being an alloy, due to the difference in the electronegativity be-

Figure 3. Constant energy surface of pristine CrSb at different energies. The top (a, b) and middle (c, d) panels represent the top and side view of the constant energy surface for a given energy, while the bottom panel (e, f) represents its - cross-sectional view at . Each column is dedicated to one particular energy. The left and right columns represent the constant energy surface at 0 and 2 eV, respectively.
tween Sb and Cr, the former (5s5p) acts like an acceptor and the latter (4s3d) acts like a donor. The LSM at Cr site is calculated to be 2.73 , which suggests a high spin configuration with a tentative Cr configuration. From the bonding perspective, the origin of altermagnetic band dispersion and strong AMSS is primarily attributed to the deterministic role of second neighbor interaction among the Sb-p orbitals [16].
Model structure - I: From the electronic structure perspective in MS-I, removal of one Sb in CrSb, more number of electrons are available at the Cr site and at the same time the covalent hybridization is weakened to narrow the bandwidth as can be seen from Figure 1 (n). It leads to the enhancement in the localization which in turn favors the high spin state. Therefore, we observe a higher LSM of 3.5 . The magnetic ordering of this and the other MS is maintained with the A-type configuration to study the altermagnetic phenomena.
The band structure of MS-I exhibits the AMSS characteristics, and the system has the same four nodal planes due to the presence of S roto-inversion and M mirror symmetries. However, the AMSS strength is almost one order smaller compared to that of the pristine compound, and this can be attributed to the breakdown of the Sb-Sb second neighbor interaction.
Model structure - II: Structure wise, this system can be considered as the pristine with an additional Sb occupying the center of one of the 6 remaining hexagonal pockets. This adds more valence electrons and hence more bands to the system as can be seen from Figure 1 (o). Compared to the pristine bands, in this MS we also observe narrower bands. It resembles the system where doping and substitutions often create perturbation in the local potential leading to localization of the states. With a smaller number of electrons at the Cr site, the LSM decreases to . Following the roto-inversion and mirror symmetries, the band structure MS-II has altermagnetic characteristics with reduced AMSS as in the case of MS-I.
As discussed above, in MS-I and MS-II, the spin opposite sublattices are connected by symmetry while in the pristine system they are connected by and in both the cases we have four nodal planes which implies that proper and improper rotation connecting the sublattices creates similar effect in reciprocal space while determining the altermagnetic characteristics. The reason for it is as explained below.
In (NRL), time-reversal symmetry is operated on the momentum space while applying identity on spin and this dual operation is denoted as [2]. The effect is identical to that of an inversion operator I, and it results in . Therefore, in the non-relativistic limit, the operations and behave identically as can be seen below from Eq. (1) and 2. If we define, , then,
and, as ,
Therefore, we observe degenerate eigenvalues:
Consequently, the four nodal planes observed for the system with (Figure 2) are also observed for systems with symmetry. These systems generate comparable spin density in reciprocal space as illustrated in Figure 4 (a). In Figure 4 (b), the presence of a mirror plane with the corresponding spin density is demonstrated from the -axis.

Figure 4. Spin density contours of Cr atoms and their symmetries in MS-II. (a) Top view (from -axis) of spin densities is shown (isosurface = 0.04), which indicates a rotation between two opposite spins. (b) Side view (from axis) of spin densities is shown (isosurface = 0.008), indicating the presence of symmetry between the opposite spin contours. The yellow and cyan colors represent the up and down spin density contours, respectively.
Model structure - (III - IV): With formula unit , the MS-III and IV are Sb rich systems and behave like ideal alloys where the electron transfer is weak and only electron sharing occurs through hybridization. The electronic configuration stabilizes in a high-spin state to generate an LSM of at the Cr site. The presence of an inversion center, as shown by the black dots for the corresponding structure in the middle panel of Figure 1 (j) and (k), ensures no altermagnetic characteristics in the band structure (Figure 1 (p) and (q)).
It is trivial to see the spin-opposite sublattice band degeneracy in the presence of an inversion center as,
and in the NRL,
Therefore,
Model structure - V: The MS-V has the same stoichiometry as that of MS-III and IV, and hence it also behaves like an ideal alloy and generates a LSM of at the Cr site. However, due to the lack of inversion center, and the presence of a mirror symmetry , in this case the altermagnetic band structure is observed as can be seen from Figure 1 (r). Furthermore, due to the absence of or , only the basal nodal plane survives, and on further analysis, we observe the presence of a nodal axis along and passing through . The origin of formation of a single nodal plane and nodal axis is further discussed in section V.
Fragmented nodal curves in compounds with lower symmetry
The three nodal planes emerging from the symmetry intersect with each other to create a nodal line along -axis passing through . Such a nodal line is seen in the pristine system as well as in MS-I and II. This is conventional and holds the properties of the three nodal planes it is associated with. However, the constant energy surfaces plotted for MS-V demonstrate the existence of random FNCs all across the BZ, which has not been reported earlier. This intriguing phenomenon, which may eventually lead to the practical application of AM materials, can be understood from the following symmetry analysis. The MS-V has the symmetries and , which transforms the wavefunction as:
However, Eqs. (7) and (8) are connected by the NRL led dual operation , i.e.,
Therefore, Eqs. (6) - (8), establish the following relation for the eigenvalues,
The above equation connects the two spin-opposite sublattice bands through a rotation of on a - plane for any given (see Figure 5 (upper panel)) and along for any given - (see Figure 5 (middle panel)). The former implies that two spin-opposite bands (pair bands) have to intersect each other at a given point (nodal point) in the - plane. This is demonstrated in the lower panel of Figure 5 for . As we vary the continuously, these nodal points form an FNC on the constant energy surface. As the energy varies, the shape of the nodal curve also changes. Furthermore, for each pair of bands, the shape of the nodal curve is different in general.

Figure 5. Formation of fragmented nodal curves in MS-V. The top (a-c), middle (d-f), and bottom (g-i) panels represent the top view, side view, and a – cross-sectional view at of the constant energy surface, respectively, for a given energy as explained in Figure 3. The left, middle, and right columns represent the constant energy surface at -2, 0, and 2 eV, respectively. The constant energy surfaces clearly indicate the absence of diagonal nodal planes and the formation of FNCs in MS-V.
Tailoring FNCs in Pristine CrSb through uniaxial strain
The formation of FNCs by restricting the symmetry to and can be practically realized in the pristine CrSb itself. To achieve it, we have applied a uniaxial strain along -axis which breaks the symmetry. Here, we present the results for the case of 5% strain ( changes from 4.11 Å to 4.32 Å). To obtain the electronic and magnetic structures, the strain lattice parameter was kept fixed, while the system was relaxed to obtain new (= 4.13 Å) and (= 5.32 Å) as well as new atomic positions. Within this constraint, we find that the system retains the and symmetry. The constant energy surface for E = E, which is shown in the upper panel
of Figure 6. The figure demonstrates the deviation from the six-fold symmetry exhibited by the constant energy surface of the pristine CrSb (Figure 3), and the formation of FNCs. From our analysis, we find that the increasing uniaxial strain further fragments the nodal curves.

Figure 6. Altermagnetism in strained CrSb and the formation of FNCs in it. (a) A schematic illustration of the application of strain to pristine CrSb along -axis. (b) The conversion of the diagonal nodal planes to a nodal line along axis due to reduction in symmetry. (c,d), (e,f), and (g,h) represent the top view, side view, and cross-sectional view of the constant energy surface, respectively, as explained in Figure 3. While (c, e, g) represent the constant energy surface for 0 eV, (d, f, h) represent the same for 2 eV. All the constant energy surface plots indicate the presence of FNCs in the strained CrSb.
Presence of FNCs in RbMnPO
To further validate the presence of FNCs, we scanned symmetry-lowered antiferromagnets where is one of the symmetry elements. We identified insulating RbMnPO as one such compound which is experimentally synthesized with a Néel temperature of 4K and an effective magnetic moment of 5.76 per Mn [50]. The compound crystallizes in the SG P2 and has only one symmetry element in addition to identity. The SSG symbol for this system is, P21′. The experimental lattice parameter are = 8.95 Å, = 5.45 Å, = 9.16 Å and = 90.29°. The crystal structure (Figure 7 (a)) and the AFM band structure along certain alternate magnetic -paths shown in Figure 7 (c). The constant energy surface for E = −3 eV in Figure 7 (d) and (e) with respect to the Fermi level clearly demonstrates the presence of FNCs. Furthermore, the presence of basal nodal plane is attributed to the fact that in the NRL, gives rise to the (Eqs. (7)-(9)). The underlying mechanism is same as it is discussed in the context of MS-V. The lower panel of the Figure 7, where the constant energy contours (E = −3 eV) are shown for b* and b*, indicates that the spin-opposite sublattice bands intersect each other at specific points (nodal points) to ensure the validity of two fold rotation . As varies continuously, these nodal points give rise to nodal curves.

Figure 7. FNC driven altermagnetism in RbMnPO4. (a) represents the crystal structure, (b) represents a schematic diagram of the first Brillouin zone with the high symmetry -points, and (c) represents the altermagnetic band structure containing the basal nodal plane of RbMnPO4. (d) and (e) show the side view and top view of the constant energy surface at eV, respectively. (f) and (g) represent a cross-sectional view of the same for b* and b*, respectively.
Anomalous Hall Effect
There is a wide range of reports suggesting that doping and other external stimuli can reorient the Néel vector and, thereby, modify the AHC [17, 23, 28].
Since these external factors in principle lower the symmetry of the system, the CrSb MSs present an ideal platform to systematically establish the relationship between symmetry lowering and the corresponding changes in AHC, which can be estimated by using the Kubo formula [51, 52],
Here, , , , and represent the electron charge, reduced Planck’s constant, band index, and the Fermi-Dirac distribution function, respectively. The Berry curvature, is expressed by the formula below,
Here, is velocity operator, are cyclic permutations of , and is the energy eigenvalue of -th band.
Depending on the orientation of the Néel vector, the MSG varies, and the Berry curvature distribution across the BZ is governed by the corresponding symmetries. These symmetry relations determine whether the AHC is allowed or forbidden in the system. We analyzed the symmetry operations of the pristine, strain, and MSs for Néel vector orientations along the -axis and at 30° from the -axis. The latter orientation of the Néel vector is chosen as it shows the maximum amount of AHC [28]. The presence or absence of the corresponding AHC components is summarized in Table II. The symmetry allowed AHC as a function of energy is shown in Figure 8.

Figure 8. Anomalous Hall conductivity in pristine CrSb and various model structures. (a) and (b) schematically illustrate the orientation of spin quantization axes of the magnetic atoms in each configuration along out-of-plane (-axis) and in-plane (with 30° angle from the crystallographic -axis) directions, respectively. (c), (d), and (e) indicate the finite AHC of pristine CrSb, MS-I, and MS-II, respectively, when the Néel vector is aligned along the in-plane direction. (f) and (g) represent the finite AHC in MS-V for both in-plane and out-of-plane Néel vector orientation, respectively. (h) and (i) represent the same for the strained CrSb. While the model structures in the upper panel exhibit a finite AHC only in the in-plane Néel vector orientation, the model structures in the lower panel exhibit AHC both in in-plane and out-of-plane Néel vector orientations due to symmetry lowering.
| Structure | MSG | Néel Vector orientation | Symmetries | Possible AHC Components | Resulting AHC component | |||
| Pristine CrSb | 194.268 | c-axis | , | ✓ | ✓ | ✓ | All | None |
| , | ✓ | × | × | |||||
| × | ✓ | ✓ | , | |||||
| × | ✓ | ✓ | , | |||||
| , , | × | ✓ | ✓ | , | ||||
| , | ✓ | ✓ | × | , | ||||
| , | ✓ | × | ✓ | , | ||||
| , | ✓ | ✓ | ✓ | All | ||||
| × | × | × | None | |||||
| 63.462 | w.r.t. -axis | , | ✓ | ✓ | ✓ | All | ||
| , | ✓ | × | × | |||||
| , | ✓ | × | × | , | ||||
| , | ✓ | × | ✓ | , | ||||
| MS-I/MS-II | (187.211) | c-axis | , | ✓ | ✓ | ✓ | All | None |
| ✓ | × | × | ||||||
| × | ✓ | ✓ | , | |||||
| × | × | × | None | |||||
| × | ✓ | ✓ | , | |||||
| ✓ | ✓ | × | , | |||||
| ✓ | × | ✓ | , | |||||
| (38.190) | w.r.t. -axis | ✓ | ✓ | ✓ | All | |||
| × | × | ✓ | ||||||
| × | ✓ | ✓ | , | |||||
| ✓ | × | ✓ | , | |||||
| MS-V/strained CrSb | (11.54) | c-axis | , | ✓ | ✓ | ✓ | All | , |
| , | ✓ | × | ✓ | , | ||||
| (11.50) | w.r.t. -axis | , | ✓ | ✓ | ✓ | All | ||
| , | × | ✓ | × |
Table II. Symmetry analysis and anomalous Hall conductivity (AHC) tensor components for CrSb structures (Pristine, MS-I/MS-II, and MS-V) under different magnetic space groups (MSG) and Néel vector orientations. and denote identity and inversion, respectively; and represent -fold rotation and rotoinversion about the -axis; denotes mirror reflection normal to the -axis; and indicates time-reversal combined with the symmetry operation.
In pristine CrSb, experimental studies show that the Néel vector is oriented along the out-of-plane direction [12]. In this configuration, the system belongs to MSG () (No. 194.268). As mentioned in Table II, the symmetries present in the system enforce the cancellation of the Berry curvature throughout the Brillouin zone, resulting in a vanishing AHC tensor. When the Néel vector is aligned in-plane at 30° from -axis, the magnetic space group symmetry lowers to (No. 63.462). In this reduced-symmetry configuration, the magnetic symmetries permit a non-zero component of AHC, whereas all other tensor components vanish by symmetry. Figure 8(c) shows AHC obtained in this case.
Next, we analyze the AHC for the considered model structures. Among the five of them, MS-I, MS-II, and MS-V are altermagnets and therefore have the potential to exhibit an AHC. In contrast, MS-III and MS-IV are antiferromagnetic phases in which the preservation of time-reversal symmetry enforces a complete cancellation of AHC for any Néel vector orientation. MS-I and MS-II belong to the MSG (No. 187.211) when the Néel vector is oriented along the out-of-plane direction, and to (No. 38.190) when the Néel vector is along 30° from the -axis. Similar to the pristine case, all components of AHC vanish in the out-of-plane Néel vector orientation. In contrast, for the in-plane Néel vector orientation, component is present.
Among all model structures, MS-V exhibits the most distinct anomalous Hall behavior due to its reduced symmetry. Unlike the pristine system, MS-I, and MS-II, MS-V exhibits a finite AHC not only when the Néel vector is oriented in-plane, similar to the other systems, but also when it is oriented along the out-of-plane direction. The AHC corresponding to these orientations are present in Figure 8 (f) and (g). While a single AHC component is present in the in-plane Néel vector orientation (), two components of the AHC tensor ( and ) are simultaneously present in the out-of-plane Néel vector orientation.
The investigation on AHC in model structures provides a pathway to engineer AHC in CrSb. Our results show the symmetry lowering can be used as an effective route to vary AHC in CrSb. In particular, achieving symmetry of MS-V (SSG: , and MSG: ) will enable finite AHC when the Néel vector is oriented along the out-of-plane direction. Applying a uniaxial strain on pristine CrSb along the crystallographic axis is one such method to achieve the symmetry of MS-V. To substantiate, in Figure 8-(h) and (i), we have shown the presence of non-zero AHC in the in-plane and out-of-plane Néel vector orientations for pristine CrSb under 5% uniaxial strain along -axis. Remarkably, the AHC value around the Fermi level in the strained CrSb is higher than that of pristine CrSb.
Summary and Outlook
To summarize, we carried out DFT calculations and symmetry analysis on CrSb, one of the widely investigated altermagnetic systems, to investigate the effect of symmetry lowering on the evolution of momentum dependent spin splitting and possible emergence of new quantum phenomena and transport. The symmetry lowering is achieved by designing hypothetical model structures through the insertion and removal of non-magnetic Sb at the void centers in these hexagonal systems. The model structures adhered to the well-established spin space group symmetry principles in predicting the presence or absence of altermagnetic characteristics. Interestingly, when the symmetry is lowered to , the diagonal nodal planes vanish, and instead, fragmented nodal curves (FNCs) emerge, which had not been reported in the literature so far. Along an FNC, a pair of spin-opposite sublattice bands are degenerate, and elsewhere they are split with varying strength. Furthermore, the location of FNCs differ with each pair of such bands. Therefore, it opens up a wider scope to exploit the momentum space spin polarization (MSSP) for a tailored wave vector via chemical doping or field bias. We demonstrate that such a symmetry lowering in CrSb can be practically realized through uniaxial strain along the basal crystal axis. The presence of FNCs in general is further substantiated by calculating the magnetic structure of RbMnPO, which is a known experimentally synthesized antiferromagnet. The symmetry lowering also has a profound effect on the anomalous Hall conductivity (AHC). When the symmetry is restricted to , the strained CrSb exhibits finite anomalous Hall components when the Néel vector is directed both along out-of-plane and within the plane. Experimentally, it is known that for pristine CrSb, the Néel vector is out-of-plane and AHC is zero. The strain engineering, as presented in this work, is a viable tool to realize finite AHC, and thereby making this system promising in the field of spintronics.
Acknowledgement
A.M. thanks MoE India for the PMRF fellowship.
References
- [1]L. Šmejkal, J. Sinova, and T. Jungwirth, Emerging research landscape of altermagnetism, Phys. Rev. X 12, 040501 (2022).
- [2]L. Šmejkal, J. Sinova, and T. Jungwirth, Beyond conventional ferromagnetism and antiferromagnetism: A phase with nonrelativistic spin and crystal rotation symmetry, Phys. Rev. X 12, 031042 (2022).
- [3]S. Hayami, Y. Yanagi, and H. Kusunose, Momentum-dependent spin splitting by collinear antiferromagnetic ordering, Journal of the Physical Society of Japan 88, 123702 (2019).DOI
- [4]S. Bhowal and A. Bose, Non-relativistic spin splitting: Features and functionalities, arXiv:2510.20306 (2025).arxiv.org/abs/2510.20306
- [5]Z. Guo, X. Wang, W. Wang, G. Zhang, X. Zhou, and Z. Cheng, Spin-polarized antiferromagnets for spintronics, Advanced Materials 37, 2505779 (2025).DOI
- [6]L. Šmejkal, A. B. Hellenes, R. González-Hernández, J. Sinova, and T. Jungwirth, Giant and tunneling magnetoresistance in unconventional collinear antiferromagnets with nonrelativistic spin-momentum coupling, Phys. Rev. X 12, 011028 (2022).
- [7]L. Bai, W. Feng, S. Liu, L. Šmejkal, Y. Mokrουςov, and Y. Yao, Altermagnetism: Exploring new frontiers in magnetism and spintronics, Advanced Functional Materials 34, 2409327 (2024).
- [8]R. D. Gonzalez Betancourt, J. Zubáč, R. González-Hernandez, K. Geishendorf, Z. Šobáň, G. Springholz, K. Olejník, L. Šmejkal, J. Sinova, T. Jungwirth, S. T. B. Goennenwein, A. Thomas, H. Reichlová, J. Železný, and D. Krieger, Spontaneous anomalous Hall effect arising from an unconventional compensated magnetic phase in a semiconductor, Phys. Rev. Lett. 130, 036702 (2023).DOI
- [9]S. Lee, S. Lee, S. Jung, J. Jung, D. Kim, Y. Lee, B. Seok, J. Kim, B. G. Park, L. Šmejkal, C.-J. Kang, and C. Kim, Broken kramers degeneracy in altermagnetic mnte, Phys. Rev. Lett. 132, 036702 (2024).DOI
- [10]N. Devaraj, A. Bose, and A. Narayan, An Interplay of altermagnetism and pressure in hexagonal and orthorhombic mnte, Phys. Rev. Mater. 8, 104407 (2024).DOI
- [11]O. J. Amin, A. Dal Din, E. Golias, Y. Niu, A. Zakharov, S. C. Fromage, C. J. B. Fields, S. L. Heywood, R. B. Cousins, F. Maccherozzi, J. Krempaský, J. H. Dil, D. Krieger, B. Kiraly, R. P. Campion, A. W. Rushforth, K. W. Edmonds, S. S. Dhesi, L. Šmejkal, T. Jungwirth, and P. Wadley, Nanoscale imaging and control of altermagnetism in MnTe, Nature 636, 348 (2024).DOI
- [12]S. Reimers, L. Odenbreit, L. Šmejkal, V. N. Strocov, P. Constantinou, A. B. Hellenes, R. Jaeschke Ubiergo, W. H. Campos, V. K. Bharadwaj, A. Chakraborty, T. Denneulin, W. Shi, R. E. Dunin-Borkowski, S. Das, M. Kläui, J. Sinova, and M. Jourdan, Direct observation of altermagnetic band splitting in CrSb thin films,
- [13]B. Rai, K. Patra, S. Bera, S. Kalimuddin, K. Deb, M. Mondal, P. Mahadevan, and N. Kumar, Direction-dependent conduction polarity in altermagnetic CrSb, Advanced Science 12, 2502226 (2025).DOI
- [14]J. Ding, Z. Jiang, X. Chen, Z. Tao, Z. Liu, T. Li, J. Liu, J. Sun, J. Cheng, J. Liu, Y. Yang, R. Zhang, L. Deng, W. Jing, Y. Huang, Y. Shi, M. Ye, S. Qiao, Y. Wang, Y. Guo, D. Feng, and D. Shen, Large band splitting in g-wave altermagnet CrSb, Phys. Rev. Lett. 133, 260401 (2024).DOI
- [15]G. Yang, Z. Li, S. Yang, J. Li, H. Zheng, W. Zhu, Z. Pan, Y. Xu, S. Cao, W. Zhao, A. Jana, J. Zhang, M. Ye, Y. Song, L.-H. Hu, L. Yang, J. Fujii, I. Vobornik, M. Shi, H. Yuan, Y. Zhang, Y. Xu, and Y. Liu, Three-dimensional mapping of the altermagnetic spin splitting in CrSb, Nature Communications 16, 1442 (2025).DOI
- [16]A. Mandal, A. Das, and B. R. K. Nanda, Deterministic role of chemical bonding in the formation of altermagnetism: Reflection from the correlated electron system NiS, Phys. Rev. B 112, 014420 (2025).
- [17]N. Devaraj, A. Bose, A. Das, M. A. Reja, A. Mandal, A. Narayan, and B. R. K. Nanda, Unlocking doping effects on altermagnetism in MnTe: Emergence of quasi-altermagnetism, arXiv:2508.19969 (2025).DOI
- [18]M. Wang, K. Tanaka, S. Sakai, Z. Wang, K. Deng, Y. Lyu, C. Li, D. Tian, S. Shen, N. Ogawa, N. Kanazawa, P. Yu, R. Arita, and F. Kagawa, Emergent zero-field anomalous Hall effect in a reconstructed rutile antiferromagnetic metal, Nature Communications 14, 8240 (2023).DOI
- [19]B. Dai, Y. Cheng, T. Qu, P. Huang, Y. Li, T. Wang, H. Huang, Q. Shu, and K. L. Wang, Antiferromagnetic materials exhibiting unconventional properties, Advanced Functional Materials 35, e08282 (2025).DOI
- [20]I. J. Park, S. Kwon, and R. K. Lake, Effects of filling, strain, and electric field on the néel vector in antiferromagnetic CrSb, Phys. Rev. B 102, 224426 (2020).DOI
- [21]S. Santhosh, P. Corbae, W. J. Yáñez-Parreño, S. Ghosh, C. J. Jensen, A. V. Fedorov, M. Hashimoto, D. Lu, J. A. Borchers, A. J. Grutter, T. R. Charlton, S. Islam, D. Golovanova, Y. Zhao, A. Tauraso, A. R. R. Ricardella, B. Yan, K. A. Mkhoyan, C. J. Palmström, Y. Ou, and N. Samarth, Altermagnetic band splitting in 10 nm epitaxial CrSb thin films, Advanced Materials 37, e08977 (2025).DOI
- [22]Z. Zhou, X. Cheng, M. Hu, J. Liu, F. Pan, and C. Song, Crystal design of altermagnetism, arXiv:2403.07396 (2024).arxiv.org/abs/2403.07396
- [23]M. G. Fischer, L. Odenbreit, O. Gomonay, J. Sinova, T. Denneulin, J. V. Vaz, R. E. Dunin-Borkowski, T. Kotte, T. Helm, M. Kläui, et al., Engineering alter- magnetic symmetry to enable anomalous Hall response in Cr₁₋ₓMnₓSb, arXiv:2602.06173 (2026).
- [24]S. Giri and N. Ganguly, Strain as a topological selector in altermagnetic CrSb, arXiv:2601.15916 (2026).arxiv.org/abs/2601.15916
- [25]T. Tschirner, P. Keßler, R. D. Gonzalez Betancourt, T. Kotte, D. Kriegner, B. Büchner, J. Dufouleur, M. Kamp, V. Jovic, L. Šmejkal, J. Sinova, R. Claessen, T. Jungwirth, S. Moser, H. Reichlova, and L. Veyrat, Saturation of the anomalous Hall effect at high magnetic fields in altermagnetic RuO2, APL Materials 11, 101103 (2023).
- [26]M. Leviška, J. Rial, A. Bad’ura, R. L. Seeger, I. Kounta, S. Beckert, D. Kriegner, I. Joumard, E. Schmaranzerová, J. Sinova, O. Gomonay, A. Thomas, S. T. B. Goennenwein, H. Reichlová, L. Šmejkal, L. Michez, T. Jungwirth, and V. Baltz, Anisotropy of the anomalous Hall effect in thin films of the altermagnet candidate Mn₅Si₃, Phys. Rev. B 109, 224430 (2024).
- [27]Z. Zhou, X. Cheng, M. Hu, R. Chu, H. Bai, L. Han, J. Liu, F. Pan, and C. Song, Manipulation of the altermagnetic order in CrSb via crystal symmetry, Nature 638, 645 (2025).DOI
- [28]T. Yu, I. Shahid, P. Liu, D.-F. Shao, X.-Q. Chen, and Y. Sun, Néel vector-dependent anomalous transport in altermagnetic metal CrSb, npj Quantum Materials 10, 47 (2025).arxiv.org/abs/2412.12882
- [29]L. Zhang and G. Gao, Dimension- and facet-dependent altermagnetic biferroics and ferromagnetic biferroics and triferoics in CrSb, Advanced Functional Materials, e25978 (2025).DOI
- [30]D. Jeong, S.-H. Kang, and Y.-K. Kwon, Magnetic and crystal symmetry control on spin Hall conductivity in altermagnets, Advanced Science n/a, e15002.
- [31]C. Li, M. Hu, Z. Li, Y. Wang, W. Chen, B. Thiagarajan, M. Leandersson, C. Polley, T. Kim, H. Liu, C. Fulgari, M. G. Vergniory, O. Jansson, O. Tjernberg, and J. van den Brink, Topological Weyl altermagnetism in CrSb, Communications Physics 8, 311 (2025).DOI
- [32]Z. Zhou, S. Sharma, and J. He, Ultrafast all-optical control of magnetization in the g-wave altermagnet CrSb, Phys. Rev. B , (2026).DOI
- [33]D. Litvin and W. Opechowski, Spin groups, Physica 76, 538 (1974).DOI
- [34]D. B. Litvin, Spin point groups, Acta Crystallographica Section A 33, 279 (1977).DOI
- [35]Z. Xiao, J. Zhao, Y. Li, R. Shindou, and Z.-D. Song, Spin space groups: Full classification and applications, Phys. Rev. X 14, 031037 (2024).DOI
- [36]X. Chen, J. Ren, Y. Zhu, Y. Yu, A. Zhang, P. Liu, J. Li, Y. Liu, C. Li, and Q. Liu, Enumeration and representation theory of spin space groups, Phys. Rev. X 14, 030138 (2024).DOI
- [37]Y. Jiang, Z. Song, T. Zhu, Z. Fang, H. Weng, Z.-X. Liu, J. Yang, and C. Fang, Enumeration of spin-space groups: Toward a complete description of symmetries of magnetic orders, Phys. Rev. X 14, 031039 (2024).DOI
- [38]W. F. Brinkman and R. J. Elliott, Theory of spin-space groups, Proc. R. Soc. Lond. A 294, 343 (1966).DOI
- [39]X. Chen, Y. Liu, P. Liu, Y. Yu, J. Ren, J. Li, A. Zhang, and Q. Liu, Unconventional magnons in collinear magnets dictated by spin space groups, Nature 640, 349 (2025).DOI
- [40]M. I. Aroyo, J. M. Perez-Mato, C. Capillas, E. Kroumova, S. Ivanchev, G. Madariaga, A. Kirov, and H. Wondratschek, Bilbao crystallographic server: I. databases and crystallographic computing programs, Z. Kristallogr. Cryst. Mater. 221, 15 (2006).
- [41]P. E. Blöchl, Projector augmented-wave method, Phys. Rev. B 50, 17953 (1994).pubmed.ncbi.nlm.nih.gov/9976227
- [42]G. Kresse and D. Joubert, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B 59, 1758 (1999).DOI
- [43]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).pubmed.ncbi.nlm.nih.gov/9984901
- [44]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett. 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
- [45]S. L. Dudarev, G. A. Botton, S. Y. Savrasov, C. J. Humphreys, and A. P. Sutton, Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study, Phys. Rev. B 57, 1505 (1998).DOI
- [46]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, I. Dabo, A. Dal Corso, S. de Gironcoli, S. Fabris, G. Fratesi, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sclauzero, A. P. Seitsonen, A. Smogunov, P. Umari, and R. M. Wentzcovitch, Quantum espresso: a modular and open-source software project for quantum simulations of materials, Journal of Physics: Condensed Matter 21, 395502 (2009).DOI
- [47]D. R. Hamann, Optimized norm-conserving Vanderbilt pseudopotentials, Phys. Rev. B 88, 085117 (2013).DOI
- [48]A. A. Mostofi, J. R. Yates, G. Pizzi, Y.-S. Lee, I. Souza, D. Vanderbilt, and N. Marzari, An updated version of wannier90: A tool for obtaining maximally-localised wannier functions, Computer Physics Communications 185, 2309 (2014).
- [49]S. S. Tsirkin, High performance wannier interpolation of berry curvature and related quantities with wannierberri code, npj Computational Materials 7, 33 (2021).
- [50]H. B. Yahia, E. Gaudin, and J. Darriet, Structure and magnetic properties of the new phosphate rbmnpo4, Journal of Alloys and Compounds 442, 74 (2007), proceedings of the 15th International Conference on Solid Compounds of Transition Elements.
- [51]D. J. Thouless, M. Kohmoto, M. P. Nightingale, and M. den Nijs, Quantized hall conductance in a two-dimensional periodic potential, Phys. Rev. Lett. 49, 405 (1982).DOI
- [52]R. Kubo, Statistical-mechanical theory of irreversible processes. i. general theory and simple applications to magnetic and conduction problems, Journal of the Physical Society of Japan 12, 570 (1957), https://doi.org/10.1143/JPSJ.12.570.