betaFeedback

WorksPhysics and Astronomy

Calculating Magnetic Properties of Two-Dimensional Materials for Memory Applications

Abstract

Calculating magnetic properties of two-dimensional materials is crucial for implementing memory devices (like USB drive, RAM, hard disk drive of computers) having reduced size. Two dimensional materials can be implemented as a thin film which can reduce the size of memory devices. These materials as well as devices made with magnetic two-dimensional materials are of current research interest in industry and academia. From the materials project database, crystal structure file of 30 two dimensional materials have been downloaded to calculate their magnetic properties. BURAI Quantum espresso software has been used to extract magnetic properties of 30 two dimensional (2D) materials. These 30 materials have magnetic Fe, Ni, Co, Mn, and Cr atoms in their molecular structure. Magnetic materials play a key and vital role in today's modern-day technology. There are five different types of magnetic materials. The classification magnetic materials are diamagnetism, paramagnetic, ferromagnetism, ferrimagnetism, and anti-ferromagnetism. Total energy of different magnetic configurations has been calculated to find the most stable magnetic configurations of these materials.

Introduction

BURAI Quantum ESPRESSO is a free first-principles electronic-structure calculator and materials modeler which is used to calculate different properties of the materials. ESPRESSO is an acronym for Open-Source Package for Research in Electronic Structure, Simulation, and Optimization. The software is based on density-functional theory (DFT), and is used to calculate total energy, and magnetic moment.

Two dimensional materials are first extracted from materials database. Then the materials were analyzed to find its magnetic properties. Materials have been identified as ferromagnetic or antiferromagnetic materials from the calculated lowest total energy which is also called ground or more stable state. Antiferromagnetic materials can store a larger amount of data compared to ferromagnetic materials. Magnetic moment is also calculated which shows the magnetic strength in a material. Extracted parameters and properties can be used to simulate new memory devices and smaller chips.

The name of the software used is called Burai 1.3 expresso, and it is excellent. This software will allow you to run different calculation methods such as SCF, band, and geometric and each of these will let you run different calculations and they all serve its own purpose. Quantum expresso is a suite for first-principles electronic-structure calculations and materials modeling, distributed for free and as free software under the GNU General Public License. It is based on density-functional theory, plane wave basis sets, and pseudopotentials. When it comes to running calculations for the software of Burai 1.3 the pseudopotentials are everything. The pseudopotentials are like your directions to a hard piece to put together or a label that’s on the outside of a food box. When running calculations without the pseudopotentials the calculation will not run at all. This software is used to run calculations such as band structure, band, and SCF and find out if different objects and materials are magnetic and if they are magnetic are they antiferromagnetic or just ferromagnetic. Through using this you can also tell the band gap of the material and it is the gap in the different bands of the material if the material has multiple bands. If it has multiple bands and they are very spacious then of course the band gap would be high but if they are not to far apart then the band cap would be closer together and band gap would not be as high. At the end of the DFT calculations you are going to calculate all the ground state properties. Two electrons can interact with electronic charge, and they also can by their spin and mutual repulsions and attractions can be casualty for this. The main equations for calculating this is the Kohn-Shom equation. When you have a DFT package that you are trying to calculate give an input of atomic number position to make sure it is correct, then use any software to extract positions in a suitable format. A magnetic material in my personal way of viewing it is any material that has a magnetic field in it whether it is on the periodic table or not and if it is magnetic, it can be antiferromagnetic or it can just be regularly ferromagnetic. The magnetic field on a magnetic object is invisible but it holds so many responsibilities when it comes to the magnetic. The most notable property of a magnetic is a force that pulls on other ferromagnetic materials, such as iron, steel, nickel, cobalt, and attracts or repels another magnetic. These magnetic materials vary so wide in range to the point it may be difficult to pinpoint. They vary on a scale from ten to one hundred newton meters with a defined structure for a particular application. Magnetic materials play a key and vital role in today’s modern-day technology. Without the use of magnetic materials in the world a lot of the resources and everyday life things we use would be harder to make or would not hold as much value as they would without the magnetic materials in them. For example, when you look at motors, transformers, and generators we all use these things in our everyday life and the key component of all these examples are the magnetic materials that are inside of them. The magnetic materials have been around for three thousand fiver hundred years, and it was first discovered in Magnesia. It has been around almost as long as the compass which has been around for four thousand five hundred years. The nineteen eighty’s saw continued improvements in magnetic alloys, rapidly accelerating in thin films and surfaces, and the magnetic recording developments those activities supported, as well as the emergence of permanent magnets. The nineteen nineties were special because that’s when they had done research and reached the emergence of one of the nicest magnetic materials which was the nanocrystalline magnetic material. This material is used for effective antimicrobial for treating wounds especially burns and chronic wounds. This also reduces the inflammatory processes and promotes would healing and is less toxic than other forms of silver dressings due to the prolonged release of silver to the wound.

Quantum ESPRESSO is a free first-principles electronic-structure calculator and materials modeler. ESPRESSO is an acronym for (Open-Source Package for Research in Electronic Structure, Simulation, and Optimization). The software is based on density-functional theory, plane wave basis sets, and pseudopotentials (both norm-conserving and ultrasoft). Quantum ESPRESSO was used to calculate and graph operations that are common in SCF (Self-Consistent Fields) and DFT (Density Functional Theory).

The conduction band is a delocalized band of energy partly filled with electrons in a crystalline solid. These electrons have great mobility and are responsible for electrical conductivity. Valence bands are the bands of electron orbitals that electrons can jump out of, moving into the conduction band when excited. The valence band is simply the outermost electron orbital of an atom of any specific material that electrons occupy. Band gaps are the minimum amount of energy required for an electron to break free of its bound state. When the band gap energy is met, the electron is excited into a free state, and can therefore participate in conduction.

Solid-state physics describes the electronic band structure by the range of energy levels that electrons may have within it, as well as the ranges of energies not found (band gap). They are typically depicted on a 2D graph by graphing the energies of crystal orbitals in a crystalline material. Conductors (metals) have no band gaps between the valence and conduction band, this means that electrons can move freely between valence and conduction bands. Insulators have large gaps between valence bands and conduction bands, this means that the conduction band is empty, and the material cannot conduct electricity. Semiconductors have small gaps between the valence band and conduction band. This allows for certain electrons (given sufficient energy) to pass through the valence and conduction band.

Density of states describes the proportion of states that are occupied by the system at each energy. It is represented mathematically through a probability density function and averages the space and time domains that its various states occupied by the system. Density of states of matter is also continuous.

Density-functional theory is the computational quantum mechanical modelling method used in physics, chemistry, and material science. DFT is used to investigate the electronic structure of many-bodied systems, mainly molecules, atoms, and their condensed matter. What is crystal structure in real space and kk-points in reciprocal space. DFT calculations allow the equilibrium particle density and prediction of thermodynamic properties and the behavior of many-bodied systems on the basis model of interactions between particles. Spatially dependent density is used to determine the local structure and composition of materials.

A crystal structure is defined as the repeating arrangement of atoms (molecules or ions) throughout a crystal. Structure refers to the internal arrangement of particles and not the external appearance of the crystal. Crystal structures can be described in several ways. When described it usually refers to the size and shape of a unit cell and the positions of the atoms within the cell. However, insufficient information can cause a poor understanding of the true structure within three dimensions. There are several factors to consider such as the atoms unit cells arrangement, contact, and distance are used to create a full understanding. Solid state theory defines “kk-space” refers to reciprocal space. However, in electronic structure theory kk-points serve a more specific purpose. They are used as sampling points in the first Brillouin zone of material. This typically refers to the specific region of reciprocal space that is closest to the origin (0,0,0)(0,0,0).

Procedure

Magnetic materials applications are the creation and distribution of electricity and are also in appliances that run using electricity. They are used for like storage of data on audio and video tape as well as on the computer desktop. There are five different types of magnetic materials. The magnetic materials are diamagnetism, paramagnetic, ferromagnetism, ferrimagnetism, antiferromagnetic. Ferromagnetic material are materials that exhibit a spontaneous net magnetization at the atomic level, even in the absence of an external magnetic field and some examples of ferromagnetic materials are iron, cobalt, and nickel. Ferrimagnetic materials are the populations of atoms with opposing magnetic moments. For ferrimagnetic materials, these moments are unequal in magnitude, so a spontaneous magnetization remains. Ferrimagnetic material do not have a plethora of examples, but the best example of this material would be magnetite. Antiferromagnetic is a magnetism in solids such as manganese oxide in which adjacent ions that behave as tiny magnetic fields spontaneously align themselves at relatively low temperatures into opposite, or antiparallel, arrangements throughout the material so that it exhibits almost no gross external magnetism. Examples of antiferromagnetic materials Hematite, chromium, alloys of iron manganese and oxides of nickel. Crystal structure is defined as the repeating arrangement of atoms throughout a crystal. Structure refers to the internal arrangements of particles and not the external appearance of the crystal. The simple cubic shell is just a cube with an atom on each corner. This also belongs to the space group two hundred and twenty-one. Face-centered cubic is an atom arrangement found in nature. This cell structure consists of atoms arranged in a cube where each corner of the cube has a fraction of an atom with six additional full atoms positioned at the center of each cube face. A body centered cube just like the face-centered cube is an atom that is found in nature. Its makeup is a cell structure that consist of atoms arranged in a cube where each corner of the cube shares an atom and with one atom positioned at the center this is how the body centered cubic works so well. When doing a spin polarized calculation first you will set the parameters on however you want to, or you can leave the parameters in the default, and you can use any pseudopotential when trying to calculate it. You will set the starting magnetizations and then once everything is set you will click on the run button and then save it and run it as a SCF calculation and then once the file is done running you will go to the output file and look at the total magnetization and watch how the graph is converging and it will show you the magnetization.

Results

Image not extracted

Figure 2.

Figure 3 (PDF p. 5). LiCoAs; MgCoGe; YbCoGe₂; CaCoSi; LuCoGe₂; ErCoSi₂; NbCoTe₂; DyCoSi₂; ErCoGe₂; YCoGe₂; VSe; VP4; Mn₂NbP₁₂; CrGeTe₃; MnAlGe; NiTe₂; TaNiTe₂; HoCoGe₂

Image not extracted

Figure 1 (PDF p. 6).

Ferromagnetic configuration

Name of MaterialTotal EnergyMagnetic Moment (Bohr Magneton)
FeSi₂-71.59911831 Ry0.3905
BaNiSn₃-1330.66098584 Ry0.0019
CaCoSi-314.24413806 Ry0.0020
CaNiGe-345.05201142 Ry0.0028
Cr₃Te₄-1175.04381764 Ry3.4888
CrGeTe₃-1409.34667053 Ry3.1383
DyCoSi₂-861.31394678 Ry0.0021
ErCoGe₂-885.23826203 Ry0.0124
ErCoSi₂-854.11554279 Ry0.0008
ErNiGe₂-931.28659294 Ry-0.0001
FeS₂-387.08077362 Ry2.7773
FeSe-153.29297403 Ry0.2788
HoCoGe₂-883.39161470 Ry0.0128
K₂CoSe₂-471.72800815 Ry0.0123
LiCoAs-193.35070741 Ry-0.0001
LuCoGe₂-890.73846822 Ry0.0061
MgCoGe-425.94173271 Ry0.0214
Mn₂NbP₁₂-3007.11369132 Ry0.2805
MnAlGe-449.82048306 Ry2.2230
NbCoTe₂-900.46119587 Ry-0.0138
NbNiTe₂-946.43005926 Ry-0.0008
NiSe-213.48233060 Ry0.1979

Table 1.

NiT2\mathrm{NiT}_{2}-118.60557998 Ry0.0079
SiNiSb\mathrm{SiNiSb}-226.26359708 Ry-0.0002
TaNiTe2\mathrm{TaNiTe}_{2}-1042.93104763 Ry0.0021
TbCoGe2\mathrm{TbCoGe}_{2}-890.52466967 Ry0.0118
VP4\mathrm{VP}_{4}-397.90455303 Ry0.0190
VSe\mathrm{VSe}-97.13903643 Ry0.3111
YbCoGe2\mathrm{YbCoGe}_{2}-847.63703330 Ry0.0000
YCoGe2\mathrm{YCoGe}_{2}-742.64032255 Ry0.0093

Table 2.

Antiferromagnetic configuration

Name of MaterialTotal EnergyMagnetic Moment (Bohr Magneton)
FeSi2\mathrm{FeSi}_{2}
BaNiSn3\mathrm{BaNiSn}_{3}-1330.66056278 Ry0.0019
CaCoSi\mathrm{CaCoSi}-314.24323726 Ry0.0020
CaNiGe\mathrm{CaNiGe}-343.38631830 Ry-0.0000
Cr3Te4\mathrm{Cr}_{3}\mathrm{Te}_{4}-1174.94928674 Ry3.4217
CrGeTe3\mathrm{CrGeTe}_{3}-1383.11881926 Ry3.0556
DyCoSi2\mathrm{DyCoSi}_{2}-861.14865977 Ry-0.0002
ErCoGe2\mathrm{ErCoGe}_{2}-882.23881147 Ry-0.0003
ErCoSi2\mathrm{ErCoSi}_{2}-854.07589029 Ry-0.0004
ErNiGe2\mathrm{ErNiGe}_{2}-931.28989812 Ry0.0001
FeS2\mathrm{FeS}_{2}-387.09694778 Ry2.6797
FeSe\mathrm{FeSe}-153.30166315 Ry1.6943
HoCoGe2\mathrm{HoCoGe}_{2}-883.14802064 Ry0.0012
K2CoSe2\mathrm{K}_{2}\mathrm{CoSe}_{2}-471.75508283 Ry0.0000
LiCoAs\mathrm{LiCoAs}-193.37869207 Ry-0.0000
LuCoGe2\mathrm{LuCoGe}_{2}-892.53830621 Ry-0.0006
MgCoGe\mathrm{MgCoGe}-425.94119405 Ry-0.0003
Mn2NbP12\mathrm{Mn}_{2}\mathrm{NbP}_{12}-3007.11334339 Ry0.3014
MnAlGe\mathrm{MnAlGe}-450.30866286 Ry2.4075
NbCoTe2\mathrm{NbCoTe}_{2}-900.45840849 Ry0.0017
NbNiTe2\mathrm{NbNiTe}_{2}-943.62999605 Ry0.0024
NiSe\mathrm{NiSe}-213.16810980 Ry-0.0035
NiT2\mathrm{NiT}_{2}-118.57411740 Ry-0.0000
SiNiSb\mathrm{SiNiSb}-226.43808919 Ry0.0000
TaNiTe2\mathrm{TaNiTe}_{2}-1042.93685587 Ry0.0015
TbCoGe2\mathrm{TbCoGe}_{2}-890.54457574 Ry-0.0006
VP4\mathrm{VP}_{4}-397.90455303 Ry0.0624
VSe\mathrm{VSe}-97.13682196 Ry0.0537
YbCoGe2\mathrm{YbCoGe}_{2}-847.92483268 Ry-0.0000
YCoGe2\mathrm{YCoGe}_{2}-742.49069458 Ry-0.0004

Table 3.

Figure 4.

CaNiGe

Image not extracted

Figure 5 (PDF p. 9).

Figure 6 (PDF p. 10). Cr₃Te₄. Band structure. Energy / eV. Γ M K Γ A L B A | L | M | K B. Density of states. DOS / (states/eV). Energy / eV.

FeS2\mathrm{FeS}_{2}

Image not extracted

Figure 7 (PDF p. 11).

FeSi₂

Image not extracted

Figure 8.

MnAlGe band structure and density of states

Figure 9 (PDF p. 13).

Conclusion

Many materials and devices that aid in the creation of tiny chips utilized in a variety of applications have been the subject of research over the past few decades [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14]. Here two dimensional materials are first extracted from materials database. Then the materials were analyzed to find its properties.

Extracted parameters and properties can be used to simulate new memory devices and smaller chips. Engineering (EEE) 2013.

References

  1. [1]M. R. K. Akanda, “Catalogue of Potential Magnetic Topological Insulators from Materials Database”, IOSR Journal of Applied Physics (IOSR-JAP) 15 (3), 22-28 (2023)
  2. [2]M. R. K. Akanda, “Scaling of voltage controlled magnetic anisotropy based skyrmion memory and its neuromorphic application”, Nano Express 10, 2 (2022). https://iopscience.iop.org/article/10.1088/2632-959X/ac6bb5/pdfDOI
  3. [3]Md. Rakibul Karim Akanda and Roger K. Lake, “Magnetic properties of nbsi2n4, vsi2n4, and vsi2p4 monolayers”, Applied Physics Letters 119, 052402 (2021). https://doi.org/10.1063/5.0055878
  4. [4]Md. Rakibul Karim Akanda, In Jun Park, and Roger K. Lake, “Interfacial dzyaloshinskii-moriya interaction of antiferromagnetic materials”, Phys. Rev. B 102, 224414 (2020). https://journals.aps.org/prb/abstract/10.1103/PhysRevB.102.224414DOI
  5. [5]M. R. K. Akanda, “Catalog of magnetic topological semimetals”, AIP Advances 10, 095222 (2020). https://doi.org/10.1063/5.0020096
  6. [6]M. R. K. Akanda and Q. D. M. Khosru, “Fem model of wraparound cntfet with multi-cnt and its capacitance modeling”, IEEE Transactions on Electron Devices 60, 97–102 (2013). https://ieeexplore.ieee.org/abstract/document/6375797DOI
  7. [7]Yousuf, A., & Akanda, M. R. K. (2023, June), Ping Pong Robot with Dynamic Tracking Paper presented at 2023 ASEE Annual Conference & Exposition, Baltimore, Maryland. https://peer.asee.org/43897DOI
  8. [8]M. R. K. Akanda and Q. D. M. Khosru, “Analysis of output transconductance of finfets incorporating quantum mechanical and temperature effects with 3d temperature distribution”, ISDRS, 1–2 (2011), https://ieeexplore.ieee.org/abstract/document/6135292DOI
  9. [9]M. R. K. Akanda, R. Islam, and Q. D. M. Khosru, “A physically based compact model for finfets on-resistance incorporating quantum mechanical effects”, ICECE 2010, 203–205 (2010). https://ieeexplore.ieee.org/abstract/document/5700663DOI
  10. [10]M. S. Islam and M. R. K. Akanda, “3d temperature distribution of sic mesfet using green’s function”, ICECE 2010,13–16 (2010). https://ieeexplore.ieee.org/abstract/document/5700541DOI
  11. [11]M. S. Islam, M. R. K. Akanda, S. Anwar, and A. Shahriar, “Analysis of resistances and transconductance of sic mesfet considering fabrication parameters and mobility as a function of temperature”, ICECE 2010, 5–8 (2010). https://ieeexplore.ieee.org/abstract/document/5700539DOI
  12. [12]Md. Rakibul Karim Akanda, In Jun Park, and Roger K. Lake, “Interfacial dzyaloshinskii-moriya interaction of collinear antiferromagnets mnpt and nio on w, re, and au”, APS March Meeting (2021). https://ui.adsabs.harvard.edu/abs/2021APS..MARE40004A/abstract
  13. [13]Rakibul Karim Akanda, “3-D model of wrap around CNTEFT with multiple CNT channel and analytical modeling of its capacitances”, Department of Electrical and Electronic Engineering (EEE) 2013.
  14. [14]Akanda, Md. Rakibul Karim, “Magnetic Properties of Ferromagnetic and Antiferromagnetic Materials and Low-Dimensional Materials”, University of California, Riverside ProQuest Dissertations Publishing, 2021, 28651079.

Paper details

vlnc:W_swe4u4kd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents