betaFeedback

WorksPhysics and Astronomy

Coherent structure detection and the inverse cascade mechanism in two-dimensional Navier-Stokes turbulence

Abstract

Coherent structures in two-dimensional Navier-Stokes turbulence are ubiquitously observed in nature, experiments and numerical simulations. The present study conducts a comparison between several structure detection schemes based on the Okubo-Weiss criterion, the vorticity magnitude, and Lagrangian coherent structures (LCSs), focusing on the inverse cascade in two-dimensional hydrodynamic turbulence. A recently introduced vortex scaling phenomenology [B. H. Burgess, R. K. Scott, J. Fluid Mech., 811:742–756, 2017] allows the quantification of the respective thresholds required by these methods based on physical properties of the flow. The resulting improved comparability allows to identify characteristic relative differences in the detection sensitivity between the employed structure detection techniques. With respect to the inverse cascade of energy, coherent structures contribute, as expected, substantially less to the cross-scale flux than the residual incoherent parts of the flow although the energetically dominant coherent structures lead to an important large-scale deformation of the energy spectrum. This cascade inactivity can be understood by an increased misalignment of strain-rate and subgrid stress tensors within coherent structures. At the same time, the structures exhibit strong and localised nonlinear cross-scale interactions that appear to stabilize them. We quantify and interpret the resulting shape preservation of coherent structures in terms of a multi-scale gradient approach [G. L. Eyink, J. Fluid Mech., 549:191–214, 2006] as the depletion of strain rotation and vorticity gradient stretching while the dynamics of the residual fluctuations are consistent with the vortex thinning picture.

Banner appropriate to article type will appear here in typeset article

Introduction

The formation of structures in turbulent flows is ubiquitously observed in nature for example in atmospheric flows or oceans. In two-dimensional hydrodynamic turbulence, the structure formation process is associated with the inverse cascade of kinetic energy, transferring this quantity from smaller to ever larger spatial scales. This well-known phenomenon has already been predicted in the seminal papers of Kraichnan (1967), Leith (1968) and Batchelor [2] (KLB) and observed in numerous simulations (e.g. Lilly 1971; Frisch & Sulem 1984; Maltrud & Vallis 1993; Boffetta & Musacchio [5]) and experiments (e.g. Rutgers 1998; Paret & Tabeling 1998; Chen et al. 2006). We have chosen this physical system for the present work since it allows to study naturally emergent coherence typically appearing in the form of structurally rather simple vortices or combinations of those. These vortical structures are embedded in a statistically isotropic and turbulent two-dimensional flow which is conveniently accessible to direct numerical simulation (DNS) and measurement.

An intuitive and commonly accepted defining characteristic of coherence is persistence for a finite time, which leaves room for more detailed specification. A mathematically unique definition would not only be beneficial for fluid mechanics research but also for related disciplines such as astrophysics. There, the problem of the non-universality regarding vortex identification has been pointed out by Canivete Cuissa & Steiner (2020) and Yadav et al. (2021) with respect to studies of the solar atmosphere.

A number of methods for the detection of coherent structures exist that are often built on different specifications of coherence. In fact, most of the comparative studies in the literature focus on a specific class of coherence specification, e.g. Jeong & Hussain (1995) studied various vortex criteria, Hadjighasem et al. (2017) compared different techniques for Lagrangian coherent structure (LCS) identification and Taira et al. (2017) discussed numerous mode decomposition methods. A comparison and meaningful evaluation of different detection strategies and of their respective coherence specification requires fiducial physical properties of the considered flow which can be related to the detected structures.

In the present work, we consider three coherence detection schemes – two vorticity based, one of Lagrangian type – that use the Okubo-Weiss criterion (Okubo 1970; Weiss 1991), the vorticity magnitude, and the finite-time Lyapunov exponent (FTLE) field determining LCSs (Haller & Yuan 2000; Haller 2015). We compare the detection results by investigating the physical properties of the coherent and the residual (non-coherent) structures in the two-dimensional turbulent system.

The work of Ouellette (2012) follows a similar approach, which has led to several experimental studies (see Liao & Ouellette 2013; Kelley et al. 2013). The low Reynolds numbers attained in these two-dimensional experiments (Re=185Re = 185 (Liao & Ouellette 2013) and Re=220Re = 220 (Kelley et al. 2013)) however do not allow for, e.g., an adequate investigation of cross-scale turbulent interactions in the framework of the KLB similarity ansatz. This motivates the use of DNSs in the present investigation.

More specifically, we consider spectral nonlinear cross-scale fluxes of energy, as well as their scale-filtered correspondents in configuration space. We also compare with previous results based on a multi-scale gradient ansatz and employ a recently proposed vortex scaling phenomenology for two-dimensional Navier-Stokes turbulence (Burgess & Scott [8] (2018)) which applies dimensional arguments to impose physically motivated constraints onto coherent vortices. The results obtained by these theoretical approaches serve as physical reference points for the comparison of structure detection techniques and the interpretation of their results in relation to the inverse turbulent cascade of energy.

This paper is structured as follows: Section 2 presents the decomposition of the flow into coherent and residual contributions. Section 3 briefly introduces coherent structure specifications. Section 4 describes the applied diagnostics and theoretical concepts. Section 5 presents numerical methods and the parameters used for simulations and analysis. The main results are presented in section 6. A conclusion is given in section 7.

Physical model and flow decomposition

We consider Navier-Stokes turbulence on a two-dimensional 2π2\pi-periodic square of size AA governed by the differential equations,

∂tu+(u⋅∇)u=−∇p+ν∇2u,(1)\partial_t \boldsymbol{u} + (\boldsymbol{u} \cdot\nabla)\boldsymbol{u} = -\nabla p + \nu\nabla^2 \boldsymbol{u}, \tag*{(1)}
∇⋅u=0,(2)\nabla\cdot\boldsymbol{u} = 0, \tag*{(2)}

where u=(ux,uy)\boldsymbol{u} = (u_x,u_y), pp and ν\nu are the velocity, pressure and kinematic viscosity, respectively. The kinetic energy per unit mass E=(1/2A)∫Au2dAE = (1/2A) \int_A u^2\mathrm{d}A and the enstrophy Ω=(1/2A)∫Aω2dA\Omega= (1/2A) \int_A \omega^2\mathrm{d}A defined with the vorticity ω=∂xuy−∂yux\omega= \partial_x u_y - \partial_y u_x, are inviscid invariants in a two-dimensional configuration. The kinetic energy exhibits an inverse cascade, transferring energy from small to large length scales, contrary to the enstrophy, which exhibits a direct cascade.

We employ a decomposition of the total vorticity field into a coherent part, ωc\omega_c, and a residual/incoherent contribution, ωr\omega_r, (cf. Ohkitani 1991) to carry out the analysis of different schemes for coherence detection (cf. section 3 below):

ω=ωc+ωr,\omega= \omega_c + \omega_r,
ωc(x)={ω(x),ϵ(x)≥ϵthr,0,ϵ(x)<ϵthr,(3)\omega_c(\boldsymbol{x}) = \begin{cases} \omega(\boldsymbol{x}), & \epsilon(\boldsymbol{x}) \ge\epsilon_{thr},\\ 0, & \epsilon(\boldsymbol{x}) < \epsilon_{thr}, \end{cases} \tag*{(3)}
ωr(x)={0,ϵ(x)≥ϵthr,ω(x),ϵ(x)<ϵthr.(4)\omega_r(\boldsymbol{x}) = \begin{cases} 0, & \epsilon(\boldsymbol{x}) \ge\epsilon_{thr},\\ \omega(\boldsymbol{x}), & \epsilon(\boldsymbol{x}) < \epsilon_{thr}. \end{cases} \tag*{(4)}

Based on the particular specification of coherence, a physical characteristic of the flow, ϵ(x)\epsilon(\boldsymbol{x}), serves as an indicator of this property, turning the detection into a thresholding procedure with a fixed threshold, ϵthr\epsilon_{thr}. In order to improve comparability of different detection schemes, it is important to gauge their thresholds with respect to a physical property of the flow (see section 3.4 below). Technical details of the decomposition are pointed out in appendix A.1. The coherent velocity field, uc=(uc,x,uc,y)\boldsymbol{u}_c = (u_{c,x},u_{c,y}), and the residual velocity ur=(ur,x,ur,y)\boldsymbol{u}_r = (u_{r,x},u_{r,y}), are approximated by inverting ωc/r=∇×uc/r\omega_{c/r} = \nabla\times\boldsymbol{u}_{c/r} in Fourier space, a procedure symbolically represented by the operator ∇×∇−2\nabla\times\nabla^{-2}, which similarly has been employed in several related works (see Benzi et al. 1986, 1988; Borue 1994; Okamoto et al. 2007; Yoshimatsu et al. 2009; Vallgren 2011; Burgess & Scott 2018):

uc/r=−∇×(∇−2ωc/r),\boldsymbol{u}_{c/r} = -\nabla\times(\nabla^{-2}\omega_{c/r}),
u=uc+ur.(5)\boldsymbol{u} = \boldsymbol{u}_c + \boldsymbol{u}_r. \tag*{(5)}

This enables straightforward access to various decomposed turbulent fields and related quantities such as the Fourier spectrum of kinetic energy per unit mass. It is defined as E(k)=∑k∣u^(k)∣2/2E(k) = \sum_k |\hat{\boldsymbol{u}}(k)|^2/2 with the wavevector k=(kx,ky)\boldsymbol{k} = (k_x,k_y) and for the respective length scale ℓ∼k−1\ell\sim k^{-1}. Fourier-transformed quantities are denoted by ⋅^\hat{\cdot}, and the sum over all wavevectors located on a wavenumber shell, k≤∣k∣<k+1k \le|\boldsymbol{k}| < k+1, is indicated as ∑k\sum_k. According to the KLB phenomenology, the spectrum possesses scaling properties for the inverse kinetic energy and direct enstrophy cascade ranges, which are

E(k)∼ϵI2/3k−5/3,k≪kf,(6)E(k) \sim\epsilon_I^{2/3} k^{-5/3}, \qquad k \ll k_f, \tag*{(6)}
E(k)∼ηI2/3k−3,k≫kf,(7)E(k) \sim\eta_I^{2/3} k^{-3}, \qquad k \gg k_f, \tag*{(7)}

with kfk_f the forcing wavenumber at which energy and enstrophy are injected with an injection rate ϵI\epsilon_I or ηI=kf2ϵI\eta_I = k_f^2 \epsilon_I, respectively. Here, we are interested in a decomposition of the kinetic energy spectrum as

E(k)=Ec(k)+Er(k)+Ecr(k),(8)E(k) = E_c(k) + E_r(k) + E_{cr}(k), \tag*{(8)}

where Ec(k)=∑k∣u^c(k)∣2/2E_c(k) = \sum_k |\hat{\mathbf{u}}_c(k)|^2/2 and Er(k)=∑k∣u^r(k)∣2/2E_r(k) = \sum_k |\hat{\mathbf{u}}_r(k)|^2/2 are associated to spectral contributions from purely coherent and residual regions, respectively, and Ecr(k)=∑kRe⁡[u^c∗(k)⋅u^r(k)]E_{cr}(k) = \sum_k \operatorname{Re}[\hat{\mathbf{u}}_c^*(k) \cdot\hat{\mathbf{u}}_r(k)] the spectrum resulting from mixed-contributions of coherent and residual parts, with ‘∗*’ denoting the complex conjugate. In the following, we introduce the identification schemes considered for ϵ(x)\epsilon(\mathbf{x}) in equations (2.3) and (2.4) and the choice of the corresponding threshold values ϵthr\epsilon_{thr}.

Coherence specifications

In general, schemes for the detection of coherent structures can be grouped into several categories including threshold methods, modal decomposition methods such as proper orthogonal decomposition (POD) (Holmes et al. 2012), dynamic mode decomposition (DMD) (Rowley et al. 2009; Schmid 2010) or spectral proper orthonal decomposition (SPOD) (Towne et al. 2018), and wavelet methods (see Okamoto et al. 2007; Yoshimatsu et al. 2009; Farge & Schneider 2015). In this work, we focus on threshold methods, in particular the approaches based on the Okubo-Weiss (OW) criterion (Okubo 1970; Weiss 1991), the vorticity magnitude (VM), and the LCSs (Haller & Yuan 2000; Haller 2015). These schemes are straightforwardly employed using equations (2.3) and (2.4). The thresholds for the VM and for the LCS based structure detection are chosen with the help of vortex scaling (see § 3.4 below).

Okubo-Weiss (OW)/Q-criterion

A frequently applied quantity for structure identification is the Eulerian velocity gradient tensor ∇u\nabla\mathbf{u}, which is often investigated in decomposed form ∇u=S+W\nabla\mathbf{u} = \mathbf{S} + \mathbf{W}, with S=(∇u+(∇u)T)/2\mathbf{S} = (\nabla\mathbf{u} + (\nabla\mathbf{u})^{\mathrm{T}})/2 the symmetric strain-rate tensor and W=(∇u−(∇u)T)/2\mathbf{W} = (\nabla\mathbf{u} - (\nabla\mathbf{u})^{\mathrm{T}})/2 the skew-symmetric spin tensor. The usage of invariants of ∇u\nabla\mathbf{u}, e.g. the eigenvalues or the trace, and of its tensor decomposition have led to numerous identification schemes, see, e.g. (Hunt et al. 1988; Chong et al. 1990; Jeong & Hussain 1995; Hua & Klein 1998; Zhou et al. 1999; Chakraborty et al. 2005). However, all of these methods face the problem of objectivity (Haller 2005; Haller et al. 2016), i.e. they lack invariance under certain transformations of the frame of reference which combine rotation and translation. Thus for the sake of simplicity, we restrict ourselves to the well-known QQ-criterion (Hunt et al. 1988), whose two-dimensional equivalent resembles the OW criterion. It is defined as

Q=12(∣W∣2−∣S∣2)=12(12ω2−∣S∣2),(9)Q = \frac{1}{2}\left(\lvert\mathbf{W}\rvert^2-\lvert\mathbf{S}\rvert^2\right)=\frac{1}{2}\left(\frac{1}{2}\omega^2-\lvert\mathbf{S}\rvert^2\right), \tag*{(9)}

where for Q>0Q > 0 vortex dominated/elliptical regions and for Q<0Q < 0 strain dominated/hyperbolic regions are detected. Thus, ϵ(x)=Q(x)\epsilon(x)=Q(x) and ϵthr=0\epsilon_{\mathrm{thr}}=0 are set in equations (2.3) and (2.4).

Vorticity magnitude (VM)

Coherent structures in two-dimensional flows are often most clearly visible in the spatial distribution of the vorticity. Thus, an intuitive approach is to set ϵ(x)=∣ω(x)∣\epsilon(x)=\lvert\omega(x)\rvert in equations (2.3) and (2.4). Furthermore, the vorticity is closely connected to the Lagrangian-averaged vorticity deviation (LAVD) method (Haller et al. 2016), which is an objective detection criterion.

Lagrangian coherent structures (LCSs)

LCSs take the evolution of the flow field into account by determining the pair-dispersion characteristic of passively advected Lagrangian tracers (Haller & Yuan 2000; Haller 2015). Thus, they reveal structures in the flow, which are neither captured by the vorticity ω\omega nor variants of the velocity gradient tensor ∇u\nabla\mathbf{u}. To this end, the flowmap Ft0t(x0)=x(t;t0,x0)\mathbf{F}_{t_0}^{t}(x_0)=x(t;t_0,x_0) is considered, with x0=(x0,y0)x_0=(x_0,y_0) the initial position at time t0t_0. The detection of LCSs can be realised by determining the finite-time Lyapunov exponent (FTLE) field which is given by

Λt0t(x0)=1Teddylog⁡λ2C(x0),(10)\Lambda_{t_0}^{t}(x_0)=\frac{1}{T_{\mathrm{eddy}}}\log\sqrt{\lambda_2^{C}(x_0)}, \tag*{(10)}

with λ2C\lambda_2^{C} the largest eigenvalue of the Cauchy-Green strain tensor Ct0t(x0)=[∇Ft0t(x0)]T∇Ft0t(x0)\mathbf{C}_{t_0}^{t}(x_0)=[\nabla\mathbf{F}_{t_0}^{t}(x_0)]^{T}\nabla\mathbf{F}_{t_0}^{t}(x_0). The FTLE is interpreted as a local measure of stretching and can be calculated forward and backward in time. Thus, the values are set to ϵ(x)=Λt0+Teddyt(x)\epsilon(x)=\Lambda_{t_0+T_{\mathrm{eddy}}}^{t}(x) for the forward-in-time and ϵ(x)=Λt0−Teddyt0(x)\epsilon(x)=\Lambda_{t_0-T_{\mathrm{eddy}}}^{t_0}(x) for the backward-in-time case. Please note, that for the FTLE case the roles of ωc\omega_c and ωr\omega_r are switched in equations (2.3) and (2.4), meaning that small FTLE values correspond to coherent regions, contrary to the VM ∣ω(x)∣\lvert\omega(x)\rvert. This is because large FTLE values isolate coherent regions as illustrated in Figure 4 (c) and (Figure 4d). To our knowledge no condition exists for the flowmap integration time. Hence, we suggest setting it to the large-eddy turnover time TeddyT_{\mathrm{eddy}} according to § 5, which is typically the longest characteristic correlation time scale of the system. Further numerical details for the FTLE calculation are discussed in appendix § 9.§ 2.

Various physical quantities of the same region as shown in figure 2 (b)

Figure 4. Various physical quantities of the same region as shown in Figure 2 (b). (a): Absolute velocity ∣u∣|\mathbf{u}|. (b): Energy rate dE/dt\mathrm{d}E/\mathrm{d}t. (c): f-FTLE Λt0t0+Teddy\Lambda_{t_0}^{t_0+T_{\mathrm{eddy}}}. (d): b-FTLE Λt0t0−Teddy\Lambda_{t_0}^{t_0-T_{\mathrm{eddy}}}. (e): Cross-scale kinetic energy flux Zˉ\bar{Z} obtained from a smooth Gaussian filter with a filtering wavenumber of k=60k=60. (f): Angle between strain-rate and subgrid stress tensor δθˉ\delta\bar{\theta} obtained from the same filter as in (e).

Although more refined LCS approaches exist, for our purposes the FTLE yields sufficient insight into the flow physics, as high-valued FTLE regions, which are visually perceived as sharp ridges in the flow, are supposed to materially separate dynamically distinct domains with different transport characteristics. For example, these domains mark areas of zero cross-scale energy fluxes in low Reynolds number systems (cf. Kelley et al. 2013). Furthermore, forward-in-time FTLE (f-FTLE) ridges are associated with repelling LCSs and backward-in-time FTLE (b-FTLE) ridges to attracting LCSs, indicating stable and unstable manifolds in the flow in the sense of dynamical systems theory.

Determining the threshold: vortex scaling

Two of the three detection schemes considered here include free threshold parameters which complicate a meaningful comparison of the detection methods and the physical interpretation of the detection results. In order to achieve comparability between the three coherence specifications, the VM and LCS schemes are gauged by making use of the above-mentioned vortex scaling phenomenology.

This model, which we briefly summarize here for completeness, provides a physically motivated diagnostic signature which we use as a reference for the highly nontrivial threshold choice of ϵthr\epsilon_{\mathrm{thr}} in equations (3) and (4). The phenomenology characterizes coherent structures by their vortex area AA in configuration space instead of the classical wavenumber dependence in Fourier space. Therefore, a time-dependent vortex number density distribution n(A,t)n(A,t) is defined, which yields the number of coherent vortices per unit area for a certain vortex area AA at time tt. The model is based on the first three moments of nωv2n\omega_v^2 with the vortex intensity ωv2\omega_v^2. They are the vortex energy EvE_v, vortex enstrophy ZvZ_v, and vortex number NvN_v, respectively. All three quantities are assumed to be approximately conserved during the spatial growth of an ‘average’ vortex of area AA. The number density is anticipated to follow a power-law tαiA−rit^{\alpha_i}A^{-r_i} with exponents αi\alpha_i and rir_i determined via the conservation of EvE_v, ZvZ_v, and NvN_v. The range of areas is divided into a thermal bath regime Af≤A<A−A_f \leq A < A_-, an intermediate scaling regime A−<A<A+A_- < A < A_+ and a front of the vortex population A+<A≤Amax⁡A_+ < A \leq A_{\max}, respectively, where A−A_- and A+A_+ are transitional areas, AfA_f the forcing-scale area, and Amax⁡A_{\max} the maximum vortex area.

In this model, the thermal bath is associated with the equilibration of the flow with the continuous forcing, which injects energy at a constant rate generating small-scale vorticity. This leads to an AA-independent flux of EvE_v in AA-space. The intermediate scaling regime consists of a self-similar distribution of vortex sizes. It is assumed that the enstrophy lost through filament shedding during merger and aggregation processes is replaced by the enstrophy injection such that the vortex enstrophy ZvZ_v is also approximately conserved. In the front regime, vortices are expected to be large and distant from each other, such that merging events rarely occur. Thus, approximately conserving the vortex number NvN_v. Based on these conservation assumptions, the scaling laws of the number density for varying area regimes are derived as (see [8] (Burgess & Scott 2018))

n(A,t)∼{A−3,Af≤A<A−,t−1A−1,A−<A<A+,t5A−6,A+<A≤Amax⁡.(11)n(A,t) \sim\begin{cases} A^{-3}, & A_f \leq A < A_-, \\ t^{-1}A^{-1}, & A_- < A < A_+, \\ t^5 A^{-6}, & A_+ < A \leq A_{\max}. \end{cases} \tag*{(11)}

We take the best achievable agreement with the three regime subdivision (11) as a reference to gauge the threshold values in (3) and (4). Please note that this qualitative level of agreement mainly relies on the assumption that the emergence and the evolution of coherence are asymptotically self-similar for sufficiently large scale-separation between the regions of the forcing and the large scales of the system under consideration. This can only be fulfilled up to a rather modest approximate level in turbulence DNS. In the present work, the scaling exponents are considered relative to each other. Thus, their absolute numerical values are not of principal importance to the investigation. They are nevertheless mentioned above for completeness.

Diagnostic methods for the inverse cascade

The inverse cascade of kinetic energy corresponds to a cross-scale energy flux of which we distinguish coherent and residual contributions from three perspectives: (i) spectrally in Fourier space, (ii) scale-filtered in configuration space which combines the aspects of spatial scale and position, and (iii) via a multi-scale gradient (MSG) approach (Eyink 2006b) which adds scale locality and the differentiation between involved physical processes.

Spectral flux

The temporal evolution of the energy spectrum is straightforwardly obtained from the Navier-Stokes equations (1) and (2) as:

∂tE(k)+T(k)=D(k)+F(k),(12)\partial_t E(k) + T(k) = D(k) + F(k), \tag*{(12)}

with the nonlinear transfer term T(k)=∑kRe⁡[u^∗(k)⋅(u⋅∇u)^(k)]T(k) = \sum_k \operatorname{Re}[\hat{u}^{*}(k) \cdot\widehat{(u \cdot\nabla u)}(k)]. Kinetic energy is provided to the flow by a forcing term +fu+f_u on the right-hand side of the Navier-Stokes momentum balance (1). Thus, the energy source term is determined as F(k)=∑kRe⁡[u^∗(k)⋅f^u(k)]F(k) = \sum_k \operatorname{Re}[\hat{u}^{*}(k) \cdot\hat{f}_u(k)], which is equivalent to the energy injection rate εI\varepsilon_I when summed over all Fourier wavenumbers. In order to allow for a statistically stationary state, kinetic energy accumulating at the largest length scales of the flow due to the inverse cascade has to be continuously extracted from the system. For this purpose a large scale damping term −dαu-d_\alpha u is added to the right-hand side of equation (1). The energy sink D(k)=Dν(k)+Dα(k)D(k) = D_\nu(k) + D_\alpha(k) is split into two dissipative contributions, where Dν(k)=−2νk2E(k)D_\nu(k) = -2\nu k^2 E(k) is the viscous dissipation active on small length scales and Dα(k)=−2dαE(k)D_\alpha(k) = -2d_\alpha E(k) introduces friction active on large length scales. These terms are equivalent to the energy dissipation rate on viscous scales εν\varepsilon_\nu and on large scales εα\varepsilon_\alpha, respectively, when summed over all wavenumbers. Details on the numerical implementation of +fu+f_u and −dαu-d_\alpha u are given in the text around equation (36) in section 5.

The spectral cross-scale energy flux Z(k)Z(k) is obtained by summing the transfer term over consecutive shells

Z(k)=∑k′=0kT(k′)=∑k′=0k∑k′Re⁡[u^∗(k)⋅(u⋅∇u)^(k)],(13)Z(k) = \sum_{k'=0}^{k} T(k') = \sum_{k'=0}^{k} \sum_{k'} \operatorname{Re}\left[\hat{u}^{*}(k) \cdot\widehat{(u \cdot\nabla u)}(k)\right], \tag*{(13)}

and corresponds to the flux of energy from scales smaller than kk to scales larger than kk. The influence of the coherent and residual contributions with regard to the cascade mechanism is measured by the decomposition

Z(k)=∑α,β,γ∈{c,r}Zα,β,γ(k),(14)Z(k) = \sum_{\alpha,\beta,\gamma\in\{c,r\}} Z_{\alpha,\beta,\gamma}(k), \tag*{(14)}
Zα,β,γ(k)=∑k′=0kTα,β,γ(k′)=∑k′=0k∑k′Re⁡[u^α∗(k)⋅(uβ⋅∇uγ)^(k)],(15)Z_{\alpha,\beta,\gamma}(k) = \sum_{k'=0}^{k} T_{\alpha,\beta,\gamma}(k') = \sum_{k'=0}^{k} \sum_{k'} \operatorname{Re}\left[\hat{u}_{\alpha}^{*}(k) \cdot\widehat{(u_{\beta} \cdot\nabla u_{\gamma})}(k)\right], \tag*{(15)}

which results in eight independent flux contributions. We investigate the homogeneous fluxes originating from purely coherent Zc,c,c(k)Z_{c,c,c}(k) and residual components Zr,r,r(k)Z_{r,r,r}(k), and the mixed flux arising through coherent-residual interactions as Zcr(k)=Z(k)−Zc,c,c(k)−Zr,r,r(k)Z_{cr}(k) = Z(k) - Z_{c,c,c}(k) - Z_{r,r,r}(k).

Spatial flux distribution

A complementary formulation of the cross-scale energy flux which captures its local structure in configuration space and which enables a detailed analysis regarding its spatial distribution is obtained by a scale-filter approach, cf., e.g., (Ouellette 2012). For the ii-th component of the velocity vector the filter operation at a length scale ℓ\ell is given by

u‾i(x)=∫Gℓ(r)ui(x+r) d2r,(16)\overline{u}_i(\boldsymbol{x})=\int G_\ell(\boldsymbol{r})u_i(\boldsymbol{x}+\boldsymbol{r})\,\mathrm{d}^2r, \tag*{(16)}

where we choose GℓG_\ell as a smooth, non-negative, spatially well localised filter kernel with unit integral. Because we are interested in the spatial distribution of the cross-scale flux, the locality aspect of the filter is crucial for the accurate localisation of flux contributions in configuration space. Hence, in this work we employ a Gaussian filter: G^ℓ(k)=exp⁡(−k2ℓ2/24)\widehat{G}_\ell(\boldsymbol{k})=\exp(-k^2\ell^2/24) to achieve sufficient filter locality in Fourier space as well as in configuration space. The temporal evolution of the filtered kinetic energy, E‾=∣u‾∣2/2\overline{E}=|\overline{\boldsymbol{u}}|^2/2, is given by (see Pope (2000))

∂tE‾+∂iq‾i=−ϵ‾ν−Z‾,(17)\partial_t\overline{E}+\partial_i\overline{q}_i=-\overline{\epsilon}_\nu-\overline{Z}, \tag*{(17)}

with ∂i\partial_i the partial derivative of the ii-th component, where we use the Einstein summation convention. Additionally, q‾i=u‾iE‾+u‾j(p‾δij+τ‾ij−2νS‾ij)\overline{q}_i=\overline{u}_i\overline{E}+\overline{u}_j(\overline{p}\delta_{ij}+\overline{\tau}_{ij}-2\nu\overline{S}_{ij}) contains the nonlinear spatial transport and the viscous dissipation of the filtered large-scale kinetic energy with δij\delta_{ij} the Kronecker delta function, ϵ‾ν=2νS‾ijS‾ij\overline{\epsilon}_\nu=2\nu\overline{S}_{ij}\overline{S}_{ij} the viscous dissipation from the filtered velocity field, and Z‾=−S‾ijτ‾ij\overline{Z}=-\overline{S}_{ij}\overline{\tau}_{ij} the spatial cross-scale flux term representing the exchange of kinetic energy between the known filtered fields and the fluctuations which have been depleted by the filter operation in the filtered numerical system. The flux term is an inner product of the (filtered) strain-rate tensor S‾ij=(∂ju‾i+∂iu‾j)/2\overline{S}_{ij}=(\partial_j\overline{u}_i+\partial_i\overline{u}_j)/2 and the subgrid stress tensor τ‾ij=uiuj‾−u‾iu‾j\overline{\tau}_{ij}=\overline{u_i u_j}-\overline{u}_i\overline{u}_j, that expresses the stresses exerted by the depleted fluctuations. Please note that we are referring to the deviatoric (trace-free) stress term τ‾∘=τ‾−(1/2)tr⁡(τ‾)I\overset{\circ}{\overline{\tau}}=\overline{\tau}-(1/2)\operatorname{tr}(\overline{\tau})\mathbb{I}, with tr⁡\operatorname{tr} the trace operator and I\mathbb{I} the unit matrix. For the remainder we will write τ‾\overline{\tau} instead of τ‾∘\overset{\circ}{\overline{\tau}}. The production term Z‾\overline{Z} is equally understood as a spatial cross-scale flux term. Note that choosing a sharp spectral filter instead of a smooth Gaussian filter will lead to the equality between the spatial average of the production term and the spectral flux in equation (13) as ⟨Z‾(x)⟩=Z(k=2π/ℓ)\langle\overline{Z}(\boldsymbol{x})\rangle=Z(k=2\pi/\ell), if the wavenumber kk is chosen according to the filtering length scale ℓ\ell.

The strain-rate and stress tensor are further decomposed into coherent, residual and mixed contributions

Z‾(x)=∑α,β,γ∈{c,r}Z‾α,β,γ(x)=∑α,β,γ∈{c,r}S‾α⋅τ‾β,γ,(18)\overline{Z}(\boldsymbol{x})=\sum_{\alpha,\beta,\gamma\in\{c,r\}}\overline{Z}_{\alpha,\beta,\gamma}(\boldsymbol{x})=\sum_{\alpha,\beta,\gamma\in\{c,r\}}\overline{\boldsymbol{S}}_\alpha\cdot\overline{\boldsymbol{\tau}}_{\beta,\gamma}, \tag*{(18)}

with S‾α=(∇u‾α+(∇u‾α)T)/2\overline{\boldsymbol{S}}_\alpha=(\nabla\overline{\boldsymbol{u}}_\alpha+(\nabla\overline{\boldsymbol{u}}_\alpha)^{T})/2 and τ‾β,γ=uβuγ‾−u‾βu‾γ\overline{\boldsymbol{\tau}}_{\beta,\gamma}=\overline{\boldsymbol{u}_\beta\boldsymbol{u}_\gamma}-\overline{\boldsymbol{u}}_\beta\overline{\boldsymbol{u}}_\gamma. We propose the following three-part decomposition

Z‾(x)=−S‾:τ‾=−S‾c:τ‾c,c−S‾r:τ‾r,r−S‾c:τ‾r,r−S‾r:τ‾c,c−S‾c:(τ‾c,r+τ‾r,c)−S‾r:(τ‾c,r+τ‾r,c)(19)\overline{Z}(\boldsymbol{x})=-\overline{\boldsymbol{S}}:\overline{\boldsymbol{\tau}}=-\overline{\boldsymbol{S}}_c:\overline{\boldsymbol{\tau}}_{c,c}-\overline{\boldsymbol{S}}_r:\overline{\boldsymbol{\tau}}_{r,r} -\overline{\boldsymbol{S}}_c:\overline{\boldsymbol{\tau}}_{r,r}-\overline{\boldsymbol{S}}_r:\overline{\boldsymbol{\tau}}_{c,c}-\overline{\boldsymbol{S}}_c:(\overline{\boldsymbol{\tau}}_{c,r}+\overline{\boldsymbol{\tau}}_{r,c})-\overline{\boldsymbol{S}}_r:(\overline{\boldsymbol{\tau}}_{c,r}+\overline{\boldsymbol{\tau}}_{r,c}) \tag*{(19)}

where Z‾c(x)\overline{Z}_c(\boldsymbol{x}) consists of purely coherent and Z‾r(x)\overline{Z}_r(\boldsymbol{x}) of purely residual contributions, and Z‾cr(x)\overline{Z}_{cr}(\boldsymbol{x}) is the flux contribution originating from mixed interactions.

Because the spatial cross-scale flux consists of an inner product of two tensors, the analysis of angle alignments between tensor eigenframes is possible. Thus, a polar decomposition leads to the following expression for the total and decomposed fluxes (see Eyink 2006b; Fang & Ouellette 2016)

Z‾(x)=−2σ‾(x)λ‾(x)cos⁡(2δθ‾(x)),(20)\overline{Z}(\boldsymbol{x})=-2\overline{\sigma}(\boldsymbol{x})\overline{\lambda}(\boldsymbol{x})\cos(2\delta\overline{\theta}(\boldsymbol{x})), \tag*{(20)}
Z‾c/r(x)=−2σ‾c/r(x)λ‾c/r(x)cos⁡(2δθ‾c/r(x)),(21)\overline{Z}_{c/r}(\boldsymbol{x})=-2\overline{\sigma}_{c/r}(\boldsymbol{x})\overline{\lambda}_{c/r}(\boldsymbol{x})\cos(2\delta\overline{\theta}_{c/r}(\boldsymbol{x})), \tag*{(21)}

respectively. The positive eigenvalues of the strain-rate and subgrid stress tensors are σ‾\overline{\sigma} and λ‾\overline{\lambda}, respectively, and the angle between their corresponding eigenvectors is δθ‾\delta\overline{\theta} as illustrated in Figure 1 (a). The same definitions are used for the eigenvalues and angles of coherent and residual parts, which are indicated by the indices cc and rr, respectively. The cosine of the rotation angle between strain-rate and stress tensors, cos⁡(2δθ‾)\cos(2\delta\overline{\theta}), can be understood as an efficiency of the cross-scale energy transfer (Fang & Ouellette 2016). Therefore, a detailed analysis of angle distributions from coherent δθ‾c\delta\overline{\theta}_c and residual parts δθ‾r\delta\overline{\theta}_r is conducted in § 6.1.

Overview of different angles used in this work

Figure 1. Overview of different angles used in this work. (a): Angle δθ\delta\theta between the strain-rate S\mathbf{S} and subgrid stress tensor τ\mathbf{\tau}. (b): Angle δα[b]\delta\alpha^{[b]} between the large-scale strain-rate tensor S(0)\mathbf{S}^{(0)} and the band-pass filtered strain-rate tensor S[b]\mathbf{S}^{[b]}. Remade from Eyink (2006b). (c): Angle δβ[b]\delta\beta^{[b]} between the contractile direction of the large-scale strain-rate tensor S(0)\mathbf{S}^{(0)} and the band-pass filtered vorticity gradient vector ∇ω[b]\nabla\boldsymbol{\omega}^{[b]}.

The mixed cross-scale flux Z‾cr\overline{Z}_{cr} in equation (19) is a very complex object due to the heterogeneous subgrid stress tensors, τ‾c,r\overline{\boldsymbol{\tau}}_{c,r} and τ‾r,c\overline{\boldsymbol{\tau}}_{r,c}, which are not symmetric and thus not straightforward to interpret. Only the sum of τ‾c,r+τ‾r,c\overline{\boldsymbol{\tau}}_{c,r}+\overline{\boldsymbol{\tau}}_{r,c} yields a symmetric stress quantity. Thus, the mixed cross-scale flux contribution consists of a sum of four different physical contributions: (i) Exertion of residual stress on coherent strain-rate, (ii) exertion of coherent stress on residual strain-rate, (iii) exertion of mixed stress on coherent strain-rate, and (iv) exertion of mixed stress on residual strain-rate. For conciseness of this paper, we abstain from analysing all the single contributions of this mixed flux regarding their rotation angles, and focus on the sum of all four contributions altogether.

Multi-scale gradient (MSG) flux expansion

As a final extension of the flux analysis, the locality between strain-rate tensors on varying scales is analysed according to the second-order MSG approach (Eyink 2006a,b). For that, a second filtering operation is defined as

ui(b)(x)=∫Gℓb(r)ui(x+r) d2r,(22)u_i^{(b)}(\boldsymbol{x})=\int G_{\ell_b}(\boldsymbol{r})u_i(\boldsymbol{x}+\boldsymbol{r})\,\mathrm{d}^2r, \tag*{(22)}

where GℓbG_{\ell_b} filters out contributions from all scales smaller than ℓb=λ−bℓ\ell_b=\lambda^{-b}\ell, with a geometric factor λ>1\lambda>1. This leads to the band-pass filtered velocity

ui[b]={ui(b)−ui(b−1),b≥1,u‾i,b=0,(23)u_i^{[b]}= \begin{cases} u_i^{(b)}-u_i^{(b-1)}, & b\geq1,\\ \overline{u}_i, & b=0, \end{cases} \tag*{(23)}

representing contributions from a band of length scales between ℓb\ell_b and ℓb−1\ell_{b-1}. The filtering operation leads to the multi-scale property of the MSG expanded cross-scale flux approach. The multi-gradient nature comes from a Taylor expansion of the velocity increments δu(r;x)=u(x+r)−u(x)\delta\mathbf{u}(\mathbf{r};\mathbf{x}) = \mathbf{u}(\mathbf{x}+\mathbf{r})-\mathbf{u}(\mathbf{x}) with separation vector r\mathbf{r}. The technical details for the derivation of the second-order MSG flux are outlined in appendix A.3 and yield (see Eyink (2006b)):

Z∗MSG=−S(0):τ∗MSG=Z∗MSG(S(0):S~[b], S(0):S[b], (∇ω[b])TS(0)(∇ω[b]))=∑b=0nb(ZSR[b]+ZDSR[b]+ZDSM[b]+ZVGS[b])−ZFSF(nb)(24)\begin{aligned} Z_{*}^{MSG} = -\mathbf{S}^{(0)} : \boldsymbol{\tau}_{*}^{MSG} \\ &= Z_{*}^{MSG}\left(\mathbf{S}^{(0)} : \widetilde{\mathbf{S}}^{[b]},\ \mathbf{S}^{(0)} : \mathbf{S}^{[b]},\ (\nabla\boldsymbol{\omega}^{[b]})^{T}\mathbf{S}^{(0)}(\nabla\boldsymbol{\omega}^{[b]})\right) \\ &= \sum_{b=0}^{n_b}\left(Z_{SR}^{[b]} + Z_{DSR}^{[b]} + Z_{DSM}^{[b]} + Z_{VGS}^{[b]}\right) - Z_{FSF}^{(n_b)} \tag*{(24)} \end{aligned}

The parameter b∈N0b \in\mathbb{N}_0 denotes the level of scale locality of the respective MSG flux contributions ZSR[b]Z_{SR}^{[b]}, ZDSR[b]Z_{DSR}^{[b]}, ZDSM[b]Z_{DSM}^{[b]} and ZVGS[b]Z_{VGS}^{[b]}, meaning that for low bb-values contributions from strongly scale local interactions are measured, whereas contributions of non-local interactions are obtained for larger values. The total number of filter bands is denoted as nbn_b. The inner products between tensors, as well as matrix vector products are expressible in polar coordinates as

S(0):S~[b]=−σ(0)σ[b]sin⁡(2δα[b]),(25)\mathbf{S}^{(0)} : \widetilde{\mathbf{S}}^{[b]} = -\sigma^{(0)}\sigma^{[b]}\sin\left(2\delta\alpha^{[b]}\right), \tag*{(25)}
S(0):S[b]=σ(0)σ[b]cos⁡(2δα[b]),(26)\mathbf{S}^{(0)} : \mathbf{S}^{[b]} = \sigma^{(0)}\sigma^{[b]}\cos\left(2\delta\alpha^{[b]}\right), \tag*{(26)}
(∇ω[b])TS(0)(∇ω[b])=−σ(0)∣∇ω[b]∣2cos⁡(2δβ[b]),(27)\left(\nabla\boldsymbol{\omega}^{[b]}\right)^{T}\mathbf{S}^{(0)}\left(\nabla\boldsymbol{\omega}^{[b]}\right) = -\sigma^{(0)}\left|\nabla\boldsymbol{\omega}^{[b]}\right|^{2}\cos\left(2\delta\beta^{[b]}\right), \tag*{(27)}

where σ(0)\sigma^{(0)} and σ[b]\sigma^{[b]} are the positive eigenvalues of the strain-rate tensors S(0)\mathbf{S}^{(0)} and S[b]\mathbf{S}^{[b]}, respectively, with α(0)\alpha^{(0)} and α[b]\alpha^{[b]} the angles between their corresponding eigenvectors to a fixed orthogonal frame of reference, and S~[b]\widetilde{\mathbf{S}}^{[b]} the skew-strain-rate matrix rotated counterclockwise by π/4\pi/4 to the original strain matrix S[b]\mathbf{S}^{[b]}. According to Figure 1 (b), δα[b]=α[b]−α(0)\delta\alpha^{[b]} = \alpha^{[b]} - \alpha^{(0)} is the rotation angle between the large-scale tensor S(0)\mathbf{S}^{(0)} and the subfilter-scale tensors S[b]\mathbf{S}^{[b]}. Figure 1 (c) shows δβ[b]\delta\beta^{[b]}, which is the angle between the vorticity gradient vector ∇ω[b]\nabla\omega^{[b]} and the eigenvector of S(0)\mathbf{S}^{(0)} corresponding to the negative eigenvalue. The latter is equivalent to its contractile direction.

The second-order MSG flux can be subdivided into four flux channels, in which the investigation of the angles δα[b]\delta\alpha^{[b]} and δβ[b]\delta\beta^{[b]} directly illuminates the proposed vortex thinning picture (Eyink 2006b; Xiao et al. 2009):

  • The strain rotation (SR) ZSR[b]Z_{\mathrm{SR}}^{[b]} is equivalent to the first-order MSG expansion and relates to the following physical picture: A small-scale vortex ω[b]\omega^{[b]} embedded in a large-scale strain-rate field S(0)\mathbf{S}^{(0)}, as illustrated in Figure 1 (b), is stretched along the positive and compressed along the negative eigendirection of the strain. This leads to an elliptical shape inducing a shear layer and thus a small-scale strain rotated with δα[b]=±π/4\delta\alpha^{[b]} = \pm\pi/4 towards the large-scale strain, depending on the sign of the vorticity.

  • The differential strain rotation (DSR) ZDSR[b]Z_{\mathrm{DSR}}^{[b]} contains a Newtonian stress-strain relation of the form τ[b]=−νT[b]S[b]\boldsymbol{\tau}^{[b]} = -\nu_{\mathrm{T}}^{[b]}\mathbf{S}^{[b]}, with negative eddy-viscosity νT[b]\nu_{\mathrm{T}}^{[b]}. According to Figure 1 (b), the elliptically-shaped vortex still possesses the same area, but the circumference increases leading to a loss of energy, due to Kelvin’s theorem of the conservation of circulation Γ=∮u⋅ds\Gamma= \oint\mathbf{u} \cdot\mathrm{d}\mathbf{s}. As a consequence, the small-scale stress τ[b]\boldsymbol{\tau}^{[b]} exerts negative work on the large-scale strain S(0)\mathbf{S}^{(0)} because of its parallel alignment to that strain. This results in an energy transfer towards larger length scales.

  • The vorticity gradient stretching (VGS) ZVGS[b]Z_{\mathrm{VGS}}^{[b]} is a measure of the elongation of vortex lines. The angle δβ[b]\delta\beta^{[b]} between the vorticity gradient vector ∇ω[b]\nabla\omega^{[b]} and the contractile direction of the large-scale strain S(0)\mathbf{S}^{(0)} measures the alignment of the stretching direction to the vorticity isolines. Thus, a higher tendency for this alignment increases the rate of stretching parallel to the isolines, as depicted in Figure 1 (c), leading to a thinning of the vortex.

  • The differential strain magnification (DSM) ZDSM[b]Z_{\mathrm{DSM}}^{[b]} contains, similar to the SR term, a skew-Newtonian stress-strain relation with skew-eddy-viscosity γT[b]\gamma_{\mathrm{T}}^{[b]}. It measures the logarithmic rate of strain increase, when moving in the direction of increasing vorticity. According to Xiao et al. (2009), this term is generally expected to be smaller, as we can confirm in the results of § 6.2.

Although the vortex thinning picture is not necessarily associated with single coherent vortices, but rather with the whole vorticity ensemble itself, we intend to measure the influence of coherent regions and their residual backgrounds regarding this mechanism. This is achieved by the following three-part decomposition:

Z∗,c/rMSG=−Sc(0):τ∗,c,cMSG⏟Z∗,cMSG−Sr(0):τ∗,r,rMSG⏟Z∗,rMSG−Sc(0):τ∗,r,rMSG−Sr(0):τ∗,c,cMSG−Sc(0):(τ∗,c,rMSG+τ∗,r,cMSG)−Sr(0):(τ∗,c,rMSG+τ∗,r,cMSG)(28)\begin{aligned} Z_{*,c/r}^{MSG}={}&-\underbrace{\mathbf{S}_{c}^{(0)}:\boldsymbol{\tau}_{*,c,c}^{MSG}}_{Z_{*,c}^{MSG}}-\underbrace{\mathbf{S}_{r}^{(0)}:\boldsymbol{\tau}_{*,r,r}^{MSG}}_{Z_{*,r}^{MSG}}\\ &-\mathbf{S}_{c}^{(0)}:\boldsymbol{\tau}_{*,r,r}^{MSG}-\mathbf{S}_{r}^{(0)}:\boldsymbol{\tau}_{*,c,c}^{MSG}-\mathbf{S}_{c}^{(0)}:\left(\boldsymbol{\tau}_{*,c,r}^{MSG}+\boldsymbol{\tau}_{*,r,c}^{MSG}\right)-\mathbf{S}_{r}^{(0)}:\left(\boldsymbol{\tau}_{*,c,r}^{MSG}+\boldsymbol{\tau}_{*,r,c}^{MSG}\right) \tag*{(28)} \end{aligned}

with Z∗,cMSGZ_{*,c}^{MSG} and Z∗,rMSGZ_{*,r}^{MSG} the purely coherent and residual second-order MSG flux expansions, respectively, and Z∗,crMSGZ_{*,cr}^{MSG} the flux contribution originating from the mixed interactions. For the reasons similar to those already given in § 4.2, the same form of heterogeneous stresses, τ∗,c,rMSG\boldsymbol{\tau}_{*,c,r}^{MSG} and τ∗,r,cMSG\boldsymbol{\tau}_{*,r,c}^{MSG}, appears in the mixed MSG expanded flux. To limit the scope of this paper, we refrain from an in-depth analysis of the vortex thinning angles δα[b]\delta\alpha^{[b]} and δβ[b]\delta\beta^{[b]} for the mixed MSG flux contribution. However, the decomposition of the MSG expanded flux into purely coherent and residual parts implies a decomposition of the different flux channels as well

Z∗,c/rMSG=∑b=0nb(ZSR,c/r[b]+ZDSR,c/r[b]+ZDSM,c/r[b]+ZVGS,c/r[b])−ZFSF,c/r(nb).(29)Z_{*,c/r}^{MSG}=\sum_{b=0}^{n_b}\left(Z_{SR,c/r}^{[b]}+Z_{DSR,c/r}^{[b]}+Z_{DSM,c/r}^{[b]}+Z_{VGS,c/r}^{[b]}\right)-Z_{FSF,c/r}^{(n_b)}. \tag*{(29)}

This leads to the analysis of different angles between strain-rate tensors and vorticity gradient vectors for varying scale localities, set by bb, originating from coherent and residual components

Sc(0):S~c[b]=−σc(0)σc[b]sin⁡(2δαc[b]),(30)\mathbf{S}_{c}^{(0)}:\widetilde{\mathbf{S}}_{c}^{[b]}=-\sigma_{c}^{(0)}\sigma_{c}^{[b]}\sin\left(2\delta\alpha_{c}^{[b]}\right), \tag*{(30)}
Sr(0):S~r[b]=−σr(0)σr[b]sin⁡(2δαr[b]),(31)\mathbf{S}_{r}^{(0)}:\widetilde{\mathbf{S}}_{r}^{[b]}=-\sigma_{r}^{(0)}\sigma_{r}^{[b]}\sin\left(2\delta\alpha_{r}^{[b]}\right), \tag*{(31)}
Sc(0):Sc[b]=σc(0)σc[b]cos⁡(2δαc[b]),(32)\mathbf{S}_{c}^{(0)}:\mathbf{S}_{c}^{[b]}=\sigma_{c}^{(0)}\sigma_{c}^{[b]}\cos\left(2\delta\alpha_{c}^{[b]}\right), \tag*{(32)}
Sr(0):Sr[b]=σr(0)σr[b]cos⁡(2δαr[b]),(33)\mathbf{S}_{r}^{(0)}:\mathbf{S}_{r}^{[b]}=\sigma_{r}^{(0)}\sigma_{r}^{[b]}\cos\left(2\delta\alpha_{r}^{[b]}\right), \tag*{(33)}
(∇ωc[b])TSc(0)(∇ωc[b])=−σc(0)∣∇ωc[b]∣2cos⁡(2δβc[b]),(34)\left(\nabla\omega_{c}^{[b]}\right)^{T}\mathbf{S}_{c}^{(0)}\left(\nabla\omega_{c}^{[b]}\right)=-\sigma_{c}^{(0)}\left\lvert\nabla\omega_{c}^{[b]}\right\rvert^{2}\cos\left(2\delta\beta_{c}^{[b]}\right), \tag*{(34)}
(∇ωr[b])TSr(0)(∇ωr[b])=−σr(0)∣∇ωr[b]∣2cos⁡(2δβr[b]).(35)\left(\nabla\omega_{r}^{[b]}\right)^{T}\mathbf{S}_{r}^{(0)}\left(\nabla\omega_{r}^{[b]}\right)=-\sigma_{r}^{(0)}\left\lvert\nabla\omega_{r}^{[b]}\right\rvert^{2}\cos\left(2\delta\beta_{r}^{[b]}\right). \tag*{(35)}

The variables are interpreted in the same fashion as above for the total field but now with respect to the coherent (index cc) and residual (index rr) contributions. We present an analysis of the thinning effects in § 6.2, for which ZSR,c/r[b]Z_{SR,c/r}^{[b]}, ZDSR,c/r[b]Z_{DSR,c/r}^{[b]}, ZVGS,c/r[b]Z_{VGS,c/r}^{[b]} and their corresponding angles δαc/r[b]\delta\alpha_{c/r}^{[b]}, δβc/r[b]\delta\beta_{c/r}^{[b]} are the relevant quantities measuring the thinning tendencies of purely coherent and residual parts, respectively.

Numerical methods and parameters

Equation (1) and (2) are solved in Fourier space using the equivalent and numerically more favourable vorticity representation. The differential equation includes a small-scale forcing term, f^ω\hat{f}_{\omega}, and a large-scale damping function, −d^ωω^-\hat{d}_{\omega}\hat{\omega}, yielding

∂tω^+[(u⋅∇)ω]=νk2ω^+f^ω−d^ωω^.(36)\partial_t \hat{\omega} + [(\mathbf{u} \cdot\nabla)\omega] = \nu k^2 \hat{\omega} + \hat{f}_{\omega} - \hat{d}_{\omega}\hat{\omega}. \tag*{(36)}

It is solved by a pseudospectral approach, with a second-order trapezoidal Leapfrog time integration scheme, and a 2/3-dealiasing method (Canuto et al. 1988). The forcing components of the velocity field f^u,x\hat{f}_{u,x} and f^u,y\hat{f}_{u,y} are drawn from Gaussian normal distributions and they are afterwards projected onto the solenoidal components f^u,j=(δij−kikj/k2)f^u,i\hat{f}_{u,j} = (\delta_{ij} - k_i k_j/k^2)\hat{f}_{u,i} to satisfy the incompressibility condition. The forcing term is then constructed as f^ω(k)=i(kxf^u,y(k)−kyf^u,x(k))\hat{f}_{\omega}(\mathbf{k}) = \mathrm{i}(k_x\hat{f}_{u,y}(\mathbf{k}) - k_y\hat{f}_{u,x}(\mathbf{k})) and applied at a wavenumber of kf=200k_f = 200. In order to avoid the accumulation of energy at large scales due to the inverse cascade, a large-scale linear damping term with a Gaussian damping factor d^ω(k)=αωexp⁡(−(k−k0,ω)2/(2σω2))\hat{d}_{\omega}(k) = \alpha_{\omega}\exp(-(k-k_{0,\omega})^2/(2\sigma_{\omega}^2)) is employed. The parameters for the large-scale friction factor αω\alpha_{\omega}, the center of the Gaussian damping profile k0,ωk_{0,\omega} and its variance σω2\sigma_{\omega}^2 are given in Table 2 in appendix B. We solve the system at a resolution of 409624096^2 in the square periodic domain 2π×2π2\pi\times2\pi.

RunϵI\epsilon_Iϵα/ϵI\epsilon_\alpha/\epsilon_Iϵν/ϵI\epsilon_\nu/\epsilon_IRe[105]Re[10^{5}]TeddyT_{eddy}
run113.050.670.337.870.1
run23.50.60.44.360.2
run30.880.470.532.340.4

Table 2. Simulation parameters of the two-dimensional hydrodynamic turbulence system with a resolution of 409624096^2, forcing wavenumber kf=200k_f = 200, large-scale friction factor αω=500\alpha_\omega= 500, center of Gaussian damping profile k0,ω=0.1k_{0,\omega} = 0.1, variance of the Gaussian σω2=1\sigma_\omega^2 = 1, viscosity ν=5⋅10−5\nu= 5 \cdot10^{-5} and timestep dt=5⋅10−6dt = 5 \cdot10^{-6}.

The large-eddy turnover time is estimated as Teddy=Lint/urmsT_{eddy}=L_{int}/u_{rms}, with Lint=∫k−1E(k) dk/∫E(k) dkL_{int}=\int k^{-1}E(k)\,\mathrm{d}k/\int E(k)\,\mathrm{d}k the integral length scale and urmsu_{rms} the root-mean square velocity, which is also used for the integration time of the passive tracers in the FTLE/LCS calculation in equation (10). Our results are taken after reaching a statistically stationary state, as confirmed in Figure 2 (a). They are averaged over 100 snapshots equidistantly distributed over roughly 20Teddy20T_{eddy}.

Flow observables of run1

Figure 2. Flow observables of run1 (see Table 2 in appendix B). (a): Time evolution of the kinetic energy EE and enstrophy Ω\Omega. The enstrophy is divided by 10310^3 for better visualisation. (b): Vorticity ω\omega from a 102421024^2 region, which is 6.25% of the total physical domain. The colorbar is normalised to ω/max⁡∣ω∣\omega/\max|\omega| for better visualisation of emerging structures. The upper circle highlights a vortex pair and the lower circle marks a single large-scale vortex. Physical quantities for both of these regions are further analysed in Figure 4. (c): Kinetic energy spectrum E(k)E(k) with inset showing the compensated spectrum E(k)k5/3ϵI−2/3E(k)k^{5/3}\epsilon_I^{-2/3}, where the black dashed line indicates a value of CE=6.69C_E = 6.69 predicted by the test-field model (TFM) closure of Kraichnan (1971). (d): Normalised cross-scale kinetic energy flux ZE(k)/ϵIZ^E(k)/\epsilon_I, where the inset shows the normalised enstrophy flux ZΩ(k)/ηIZ^\Omega(k)/\eta_I.

A discussion of the chosen values of the energy injection rate εI\varepsilon_I and the general system parameters for the present numerical setup can be found in appendix B, which is related to the characteristics of structure formation, the kinetic energy spectrum and the cross-scale kinetic energy flux. There, we conclude that run1 (Table 2 in appendix B) is the best choice for the purpose of our present study. The spatial vorticity distribution in Figure 2 (b) exhibits a clearly developed population of visually distinguishible vortices or coherent structures. The kinetic energy spectrum in Figure 2 (c) deviates from the theoretically expected k−5/3k^{-5/3} scaling due to finite-size effects discussed in appendix B, but we deem it to be more adequate for the subsequent analysis due to a more clearly discernible structuring of the flow. The cross-scale kinetic energy and enstrophy fluxes shown in Figure 2 (d) possess sufficiently extended ranges of inverse and direct spectral transfer. This facilitates the cross-scale flux decompositions in sections 6.1 and 6.2.

Structure detection

As already mentioned in the previous sections 3.2 and 3.3, the threshold choice for the VM, the f-FTLE and the b-FTLE criterion to sample coherent regions from the vorticity distribution is not straightforward. Therefore, the threshold is chosen such that the three-subregime structure of the coherent vortex number density, n(A)n(A), in equation (11) is realized most clearly. The system studied by Burgess & Scott [8] (2018) assumed stationarity by imposing an integral length scale far below the target length scales of the system domain. On the contrary, our system is in a statistically stationary state with constant kinetic energy EE and enstrophy Ω\Omega according to Figure 2 (a). Therefore, we analyse the scaling sensitivity of the number density n(A)n(A) only in dependence of the coherent area AA without the time tt, as presented in Figure 3 (b), (e), (h) and (k).

Coherent structures, number density and kinetic energy spectra obtained by the VM, OW, f-FTLE and b-FTLE methods

Figure 3. Coherent structures, number density and kinetic energy spectra obtained by the VM (a)-(c), OW criterion (d)-(f), f-FTLE (g)-(i) and b-FTLE (j)-(l), respectively. The coherent areas are color-coded matching the normalised number densities n(A)/Nn(A)/N and the decomposed energy spectra, with NN the total number of detected structures. Color-code: (ii) lowest area occupation: green regions corresponding to the green lines of the number density and decomposed energy spectra plots, (iiii) intermediate area occupation: green+blue regions corresponding to the blue lines and (iiiiii) largest area occupation: green+blue+red regions corresponding to the red lines. The OW criterion has only one permitted threshold, hence only a single area occupation is shown. All the energy spectra are compensated by k−5/3k^{-5/3}, with the black solid line indicating the total energy spectrum E(k)E(k), and the colored solid and dashed lines denoting the coherent Ec(k)E_c(k) and residual Er(k)E_r(k) spectra, respectively. The black dotted horizontal line visualises deviations from the k−5/3k^{-5/3} scaling.

Our comparison of coherence specifications and detection methods begins with the VM criterion. This approach is technically closest to the detection method chosen in Burgess & Scott [8] (2018) and thus expected and observed to yield the best agreement with the findings published there and with the corresponding asymptotic scaling laws of the vortex number density, n(A)n(A). We vary the VM threshold introduced in section 3.2 with three different values ϵthr=1.1ωrms,0.9ωrms,0.7ωrms\epsilon_{\mathrm{thr}} = 1.1\omega_{\mathrm{rms}}, 0.9\omega_{\mathrm{rms}}, 0.7\omega_{\mathrm{rms}}, for which the total areas occupied by the coherent regions in Figure 3 (a) amount to 3.4%, 6.1%, 13.5%, respectively. Filamentary structures occur with increasing area occupation extending the thermal bath regime in Figure 3 (b). The number density approximately exhibits the phenomenologically proposed asymptotic A−3A^{-3} scaling for the highest area occupation. The approximate power-law deteriorates as the threshold is raised and the detected set comprises of fewer structures. As the VM criterion explicitly detects regions of high vorticity, the most energetic regions of the flow are included in the coherent part, which is evident from the decomposed kinetic energy spectra in Figure 3 (c). Most of the energy is concentrated in Ec(k)E_c(k), whereas the energy in the residual spectrum Er(k)E_r(k) decreases for larger length scales with scalings which become flatter than k−5/3k^{-5/3} for increasing area occupations. The clearly discernible intermediate region exhibits an increased fluctuation level for lower thresholds since larger and thus fewer structures tend to be detected. This is consistent with larger deviations of the measured scaling exponent from the predicted value than in the case of the thermal bath as seen in Table 1.

Methodlog⁡10(Af)\log_{10}(A_f)log⁡10(A−)\log_{10}(A_-)log⁡10(A+)\log_{10}(A_+)log⁡10(Amax⁡)\log_{10}(A_{\max})(i)(ii)(iii)
VM2.63.443.944.14−2.92±0.09-2.92 \pm0.09−1.38±0.11-1.38 \pm0.11−5.15±0.86-5.15 \pm0.86
OW2.573.423.723.95−3.41±0.07-3.41 \pm0.07−1.01±0.13-1.01 \pm0.13−4.63±0.66-4.63 \pm0.66
f-FTLE2.573.533.663.73−2.63±0.01-2.63 \pm0.010.11±0.310.11 \pm0.31−24.45±2.24-24.45 \pm2.24
b-FTLE2.563.453.583.68−2.8±0.02-2.8 \pm0.020.08±0.310.08 \pm0.31−23.79±1.68-23.79 \pm1.68

Table 1. Logarithmic power-law scalings of the three-part vortex number densities n(A)n(A) corresponding to structures detected by the VM (ϵthr=0.9ωrms\epsilon_{\rm thr}=0.9\omega_{\rm rms}, area occupation: 6.1%), OW criterion, f-FTLE (ϵthr=0.905Λt0+Teddyt0,rms\epsilon_{\rm thr}=0.905\Lambda_{t_0+T_{\rm eddy}}^{t_0,\rm rms}, area occupation: 6.0%) and b-FTLE (ϵthr=0.915Λt0−Teddyt0,rms\epsilon_{\rm thr}=0.915\Lambda_{t_0-T_{\rm eddy}}^{t_0,\rm rms}, area occupation: 6.8%), respectively. The scaling ranges are denoted as: (i) thermal bath Af≤A<A−A_f \leq A < A_-, (ii) intermediate A−<A<A+A_- < A < A_+, and (iii) front A+<A≤Amax⁡A_+ < A \leq A_{\max}. Scaling exponents based on linear regression are given together with the respective standard deviation. The transitional areas A−A_- and A+A_+ are estimated from Figure 3 (b), (Figure 3e), (Figure 3h) and (Figure 3k). For simplicity, the forcing-scale area AfA_f and the maximum vortex area Amax⁡A_{\max} are chosen as the first and last datapoints of the respective abscissae of n(A)n(A).

In contrast to the VM method, the OW criterion only permits one possible threshold ϵthr=0\epsilon_{thr}=0. The detected coherent regions in Figure 3 (d) amount to an area occupation of 5.3%. The thermal bath range obtained via the OW method drops steeper with increasing area AA than for the VM technique (cf. Table 1). This indicates a preference of the OW criterion for intense vortices at the cost of lesser vortical structures in the interval Af≤A<A−A_f \le A < A_-. The intermediate range of the number density n(A)n(A) in Figure 3 (e) has the best fulfillment of the A−1A^{-1} scaling compared to the other methods according to Table 1. This is not surprising, since the OW criterion favours circularly shaped structures, which are also detected by the modified vorticity threshold criterion used by Burgess & Scott [8] (2018).

The residual energy spectrum Er(k)E_r(k) in Figure 3 (f) possesses a scaling closer to k−5/3k^{-5/3} in the inertial range from k≈10−200k \approx10 - 200 versus the total spectrum E(k)E(k). In comparison, the coherent spectrum Ec(k)E_c(k) has a much shorter k−5/3k^{-5/3} scaling range from k≈10−30k \approx10 - 30, which becomes shallower for increasing wavenumbers. This indicates that the lacking energetic self-similarity of largest-scale coherent structures detected by the OW criterion pollutes the scaling of the theoretically expected KLB spectrum of total energy (see appendix B). The residual energy whose scaling is not suffering from this specific finite-size effect of the numerical simulation exhibits good agreement with KLB expectations, see also, e.g., [6] (Scott 2007; Vallgren 2011; Burgess & Scott 2018).

With regard to the sensitivity of the LCS detection, presented in § 3.3, we set the thresholds of the f-FTLE sampling scheme to ϵthr=0.87Λt0,rmst0+Teddy\epsilon_{thr}=0.87\Lambda_{t_0,rms}^{t_0+T_{eddy}}, 0.905Λt0,rmst0+Teddy0.905\Lambda_{t_0,rms}^{t_0+T_{eddy}}, 0.94Λt0,rmst0+Teddy0.94\Lambda_{t_0,rms}^{t_0+T_{eddy}}, which amount to coherent area occupations of 3.1%, 6.0%, 11.2%, respectively. The thresholds for the b-FTLE are set to ϵthr=0.88Λt0,rmst0−Teddy\epsilon_{thr}=0.88\Lambda_{t_0,rms}^{t_0-T_{eddy}}, 0.915Λt0,rmst0−Teddy0.915\Lambda_{t_0,rms}^{t_0-T_{eddy}}, 0.94Λt0,rmst0−Teddy0.94\Lambda_{t_0,rms}^{t_0-T_{eddy}}, resulting in coherent area occupations of 3.3%, 6.8%, 10.9%, respectively. The crinkly-shaped structures occurring in the domain, as shown in Figure 3 (g) and (Figure 3j), lead to the flattening of the thermal bath regime and a simultaneous steepening of the intermediate range with increasing area occupation, as depicted in Figure 3 (h) and (Figure 3k). Note that the different structural shape also results in a more extended thermal bath regime and a diminishing intermediate range with increasing area occupation in contrast to the OW and VM criterion. Comparing f-FTLE and b-FTLE fields, similar larger-sized structures are detected by both fields, whereas smaller-sized structures are detected at differing positions. This is not surprising, since forward- and backward-in-time LCSs, are associated with different fluid dynamics, i.e. repelling and attracting manifolds in a dynamical systems sense, respectively (Haller & Yuan 2000; Haller 2015). The residual energy spectra Er(k)E_r(k) in Figure 3 (i) and (Figure 3l) are closer to a k−5/3k^{-5/3} scaling throughout the entire inertial range compared to the total spectrum E(k)E(k), indicating a pollution of the KLB spectrum by the coherent structures similar to the results of the OW criterion.

The large-scale damping required for the achieving stationarity impacts the apparition of large-scale structures as discussed in appendix B. This leads to the anomalous and partially polluted power-laws of the front regime in Figure 3 (b), (Figure 3e), (Figure 3h) and (Figure 3k) compared to the phenomenologically expected exponent of A−6A^{-6} [8] (Burgess & Scott 2018), where a large-scale damping mechanism has not been employed. Another reason for the deviation is the resolution of 819228192^2 in the conducted DNS of Burgess & Scott [8] (2018), which is higher compared to our present study. Nevertheless, the overall trend of the three-part number density n(A)n(A) is satisfied in all of these definitions. Moreover, independent of the definition, coherent structures tend to distort the theoretically predicted KLB scaling as illustrated in Figure 3 (c), (Figure 3f), (Figure 3i) and (Figure 3l).

In summary and in comparison to the VM detection technique the OW and the LCS approaches tend to detect similar large-scale coherence features of the flow, in spite of their distinct underlying coherence specifications. The different characterizations of coherence lead to a reduced sensitivity for small-scale turbulent structures in the case of OW, while the physically most involved LCS method tends to detect a surplus of small-scale structures compared to the most simple VM specification. We proceed by setting the respective detection parameters such that the detection signatures as shown in Figure 3 (b), (Figure 3e), (Figure 3h) and (Figure 3k) become most similar to each other, i.e. an area occupation of 6.1% for VM, of 6.0% for f-FTLE, and of 6.8% for b-FTLE. The resulting scalings in Table 1 reflect a rough overall agreement with the three expected scaling regimes of the number density n(A)n(A). Small adjustments of these thresholds do not result into qualitatively significant differences regarding the inverse cascade analysis, which is conducted in the next section.

Relation of coherent structures to the inverse cascade process

Coherent features of the vorticity field ω\omega (shown in Figure 2 (b)) contain most of its kinetic energy, as inferred from the spatial distribution from the absolute velocity ∣u∣|u| in Figure 4 (a), with the largest fraction located in the vicinity of the vortex core. For the vortex pair in Figure 2 (b), the energy increases towards their separatrix where the maximum value is reached.

The f-FTLE and b-FTLE fields, Λt0t0+Teddy\Lambda_{t_0}^{t_0+T_{eddy}} and Λt0t0−Teddy\Lambda_{t_0}^{t_0-T_{eddy}}, are illustrated in Figure 4 (c) and (Figure 4d), respectively, where high FTLE values are potential candidates for LCSs. The LCS method considered here detects coherent vortices by the characteristic patterns of two-particle dispersion dynamics perpendicular to the identified material lines that are shown in the figure. From this perspective, the approach senses the imprint of a coherent structure on the surrounding flow rather than detecting specific differential (OW) or amplitude markers (VM) associated with coherence. LCS can thus be regarded as complementary to the two other methods considered here. The LCS based on the f-FTLE field displays more pronounced small-scale fluctuations perpendicular to the respective material line as compared to the b-FTLE field. This reflects the different repelling and attracting dynamics expected along forward- and backward-in-time LCSs, while the difference between the Lagrangian scheme used for the f-FTLE and the semi-Lagrangian approach employed for the b-FTLE (see appendix § 9.§ 2) can play a role here as well. There is a strong visual correlation between ridges in both FTLE fields with the boundaries of vortices observed in the vorticity field. This corroborates the above choice of sampling the vorticity distribution with the f-FTLE and b-FTLE according to equations (3) and (4).

Cross-scale flux efficiency

When aiming at establishing a link between the nonlinear cross-scale flux and the detected structures in configuration space, the temporal derivative of energy, dE/dtdE/dt, see Figure 4 (b), is only of limited value as it does not yield clear localized signatures correlated with coherent vortices. In contrast, the spatial distribution of the cross-scale energy flux Z‾\overline{Z} exhibits intense quadrupolar structures in coherent regions reflecting their high level of symmetry. This is shown in Figure 4 (e) and has been observed by Xiao et al. (2009) and Liao & Ouellette (2013) as well. Thus, coherent regions lead to large local contributions to the cross-scale flux, but do not necessarily generate significant contributions to the spatially averaged net inverse flux ⟨Z‾⟩\langle\overline{Z}\rangle.

The cross-scale energy flux is decomposed into its coherent, residual, and mixed contributions, for the spectral cross-scale fluxes Zc,c,cE(k)Z^{E}_{c,c,c}(k), Zr,r,rE(k)Z^{E}_{r,r,r}(k), ZcrE(k)Z^{E}_{cr}(k) (equation (15)) and the spatially averaged cross-scale flux distributions in configuration space ⟨Z‾c(x)⟩\langle\overline{Z}_{c}(x)\rangle, ⟨Z‾r(x)⟩\langle\overline{Z}_{r}(x)\rangle, ⟨Z‾cr(x)⟩\langle\overline{Z}_{cr}(x)\rangle (equation (19)), respectively. Both cross-scale flux measurements are shown in Figure 5, because the ZE(k)Z^{E}(k) representation is usually favored for quantifying the existence of turbulent cascade activity, whereas the Z‾(x)\overline{Z}(x) representation is commonly used to reveal the spatial structure of the flux. We observe that the fluxes of all coherence definitions are qualitatively similar, although the OW criterion in Figure 5 (b), and the f-/b-FTLE in Figure 5 (c) and (Figure 5d), respectively, possess higher quantitative similarity in contrast to the VM scheme. For the latter, the coherent flux Zc,c,cE(k)Z^{E}_{c,c,c}(k) is slightly higher for all scales as shown in Figure 5 (a) which shows the limits of the applied simple gauge criterion. This is because the VM favourably extracts higher-valued vorticity regions compared to the other detection schemes, which are attributed to larger-sized structures according to the coherent spectrum Ec(k)E_{c}(k) in Figure 3 (c). Therefore, the highest coherent flux contributions are rather in the lower wavenumber range, with a decreasing contribution towards higher wavenumbers. The structures detected by the f-FTLEs and b-FTLEs have vanishing coherent flux contributions, which are close to zero for the entire inertial range. This is in agreement with both forward- and backward-in-time LCSs, having the tendency to collectively inhibit the energy transfer among scales (Kelley et al. 2013). The circularly-shaped structures identified by the OW criterion also exhibit the same behavior of inhibiting the cross-scale flux. These observations contribute to an alternative definition of coherence in a turbulence context in the sense that energy within these structures tends to remain rather closely at their given length scales without cascading across scales.

Comparison of cross-scale kinetic energy fluxes for varying coherence definitions

Figure 5. Comparison of cross-scale kinetic energy fluxes of varying coherence definitions, obtained from the spectral formulation ZE(k)Z^{E}(k) (dashed lines) and the spatially averaged formulation ⟨Z‾(x)⟩\langle\overline{Z}(x) \rangle (solid lines) obtained by Gaussian filtering for varying filter length scales ℓ\ell. The grey vertical line indicates the wavenumber k=60k = 60, at which the subsequent analysis of the spatial cross-scale flux distribution is conducted.

Generally, the merging of coherent vortices has been one of the most appealing physical mechanisms for the inverse cascade for quite some time. However, independent of the definition and as shown above, the coherent part of the flux Zc,c,cE(k)Z^{E}_{c,c,c}(k) has an overall low negative contribution throughout the inertial range.

Therefore, merging effects of coherent structures have a weak influence to the overall inverse cascade, which also has been pointed out by Xiao et al. (2009).

The residual flux Zr,r,rE(k)Z^{E}_{r,r,r}(k) remains negative throughout the inertial range as well, peaking at small-scales, close to the forcing wavenumbers, and decaying roughly logarithmically towards larger-scales. This is due to the contribution of detected smaller-sized structures, according to the residual spectra Er(k)E_r(k) already shown in Figure 3 (c), (Figure 3f), (Figure 3i) and (Figure 3l) above. We propose in § 6.2 that the negative contribution of the residual flux is attributed to a stronger impact of the thinning mechanism on smaller scales.

Furthermore, a substantial amount of the net negative flux on each length scale originates from the mixed coherent-residual interactions ZcrE(k)Z^{E}_{cr}(k), which roughly stays at a constant level throughout the inverse flux region. We abstain from ascribing this flux contribution to more specific physical dynamics as this flux results from the complex interplay between coherent/residual/mixed stresses and coherent/residual strain-rates as already mentioned in § 4.2.

Because the Fourier cross-scale flux is determined via spatial integration, an investigation in configuration space is reasonable for gaining further insight. The coherent part Z‾c(x)\overline{Z}_c(\boldsymbol{x}) reconstructed from ωc\omega_c mostly consists of highly ordered quadrupolar structures and is exemplarily illustrated for the VM criterion in Figure 6 (a). Compared to that, the ωr\omega_r-reconstructed residual part Z‾r(x)\overline{Z}_r(\boldsymbol{x}) in Figure 6 (b) has rather complex and unordered spatial features. Similar spatial characteristics for coherent and residual parts are obtained for the other coherence-detection methods. Also, qualitatively similar findings are gained for filtering lengths below the damping-dominated and above the forcing-dominated length scales, hence we employ a filtering wavenumber of k=60k = 60 for the remaining analysis.

Reconstructed spatial cross-scale kinetic energy flux distributions of the coherent and residual parts

Figure 6. Reconstructed spatial cross-scale kinetic energy flux distributions of the (a) purely coherent Z‾c(x)\overline{Z}_{c}(x) and (b) purely residual Z‾r(x)\overline{Z}_{r}(x) parts obtained by the VM criterion for a filtering wavenumber of k=60k = 60, with each normalised by its root-mean square value for visualisation purposes. The absolute values of Z‾c\overline{Z}_{c} are much higher compared to Z‾r\overline{Z}_{r} with a ratio max⁡(∣Z‾c∣)max⁡(∣Z‾r∣)≈44\frac{\max(\lvert\overline{Z}_{c}\rvert)}{\max(\lvert\overline{Z}_{r}\rvert)} \approx44.

Another observation, in the context of the present work, is that coherent structures, independent of their detection method, have much higher local cross-scale flux amplitudes compared to their residual counterparts. Using the VM criterion as an example, the ratio between the maximum absolute values of the ωc\omega_c-reconstructed and the ωr\omega_r-reconstructed spatial cross-scale fluxes is max⁡(∣Z‾c∣)max⁡(∣Z‾r∣)≈44\frac{\max(\lvert\overline{Z}_c\rvert)}{\max(\lvert\overline{Z}_r\rvert)} \approx44. Similar ratios are obtained for the other coherence definitions. However, high amplitudes are not necessarily responsible for a high net inverse flux. As a general observation, the probability density function (PDF) of the total cross-scale flux Z‾\overline{Z}, used for reference for the comparison to the various coherence schemes shown in Figure 7 (a)-(Figure 7d), centralises around zero with a slightly negative skewness of μ~3=−0.93\widetilde{\mu}_3 = -0.93. Furthermore, the PDF has a kurtosis of μ~4=336\widetilde{\mu}_4 = 336 corresponding to a very flat distribution, which indicates that rare high negative amplitude events contribute to the total net negative flux. The PDFs of the coherent parts Z‾c\overline{Z}_c of all coherence definitions exhibit larger tails to both positive and negative values compared to the total field, with kurtosis values of 404, 430, 503 and 547 for the VM, OW criterion, f-FTLE, and b-FTLE, respectively. This suggests that coherent structures are responsible for the high spatial fluctuations of the total cross-scale flux distribution, although these strong fluctuations do not sustain a cascade as already seen before with the overall low Fourier cross-scale flux contributions in Figure 5 (a)-(Figure 5d). In contrast, the PDFs of the residual contributions Z‾r\overline{Z}_r possess lower tails to both positive and negative values. The negative skewness values of −0.76, −1.4, −2.01, and −0.96 for the VM, OW criterion, f-FTLE, and b-FTLE, respectively, lead to a measurable net inverse cascade of the residual part. However, due to the overall flat nature of the residual PDFs, the residual cascade is also driven by rare high negative amplitude events.

Probability density functions of spatial cross-scale flux distributions and rotation angle distributions

Figure 7. All quantities are filtered at a wavenumber of k=60k = 60. (a)-(d): PDFs of spatial cross-scale flux distributions Z‾\overline{Z}, Z‾c\overline{Z}_{c} and Z‾r\overline{Z}_{r} with each normalised by its standard deviation Z‾SD\overline{Z}^{SD}, Z‾cSD\overline{Z}_{c}^{SD} and Z‾rSD\overline{Z}_{r}^{SD}, respectively. (e)-(h): PDFs of rotation angle distributions between strain-rate and subgrid stress tensors δθ‾\delta\overline{\theta}, δθ‾c\delta\overline{\theta}_{c} and δθ‾r\delta\overline{\theta}_{r}.

The angle distributions between stress and strain-rate tensors as a flux transfer efficiency measure, motivated by equations (20) and (21), is shown in Figure 4 (f), where the largest part of the marked coherent regions display angles close to δθˉ=π/4\delta\bar{\theta} = \pi/4. The corresponding misalignment of strain-rate and subfilter stress tensors results in a lower nonlinear flux efficiency. A clearer picture of the overall cascade direction tendencies is obtained from the PDFs of δθˉ\delta\bar{\theta}, δθˉc\delta\bar{\theta}_{c} and δθˉr\delta\bar{\theta}_{r} shown in Figure 7 (e)-(Figure 7h). The PDF of the total field δθˉ\delta\bar{\theta} clearly shifts towards values smaller than π/4\pi/4, with skewness and kurtosis values of μ~3=0.06\tilde{\mu}_{3} = 0.06 and μ~4=3.79\tilde{\mu}_{4} = 3.79, respectively. This indicates that the strain-rate and stress tensors, S‾\overline{\mathbf{S}} and τ‾\overline{\boldsymbol{\tau}}, tend to positively align, which lead to the overall net negative flux. However, the shape of all the PDFs of the coherent parts δθˉc\delta\bar{\theta}_{c} are mostly symmetric and centered at a value of π/4\pi/4 with skewness values 0.06, 0.02, 0.0, and 0.03 for the VM, OW criterion, f-FTLE and b-FTLE, respectively. Thus, the coherent strain-rate and stress tensors, S‾c\overline{\mathbf{S}}_{c} and τ‾c,c\overline{\boldsymbol{\tau}}_{c,c}, have the tendency to fully misalign, resulting in a lower cross-scale flux efficiency, despite their high local flux amplitudes. On the contrary, the PDFs of the residual parts δθ‾r\delta\overline{\theta}_{r} skew even more to the right compared to the total field δθ‾\delta\overline{\theta}, with skewness values of 0.14, 0.13, 0.12, and 0.11 for the VM, OW criterion, f-FTLE and b-FTLE, respectively. Additionally, for the OW criterion in Figure 7 (f), for the f-FTLE in Figure 7 (g), and for the b-FTLE in Figure 7 (h), the left tails of the residual parts δθ‾r\delta\overline{\theta}_{r} are even higher and the right tails even lower compared to their corresponding coherent counterparts δθ‾c\delta\overline{\theta}_{c}. These tendencies lead to a higher stress-strain tensor alignment behavior and thus a higher cross-scale flux efficiency of the residual compared to the coherent part.

We conclude that although strong nonlinear cross-scale flux interactions are found within the quadrupolar structures of Figure 6 (a), these high local flux amplitudes are not responsible for an actual cascade process. They are rather responsible for sustaining the structures’ coherence in a turbulent environment by keeping the associated energy close to specific length scales.

Coherent shape preservation and residual thinning mechanism

A possible reason for the small coherent Fourier cross-scale flux contributions is the shape preservation of coherent structures in combination with the enhanced flux efficiency of the residual part due to increased vortex thinning. To verify this hypothesis, the MSG expanded cross-scale energy flux in equation (24) and its decomposed form in equations (28) and (29) are investigated in more detail with a filtering length of ℓ=π/15\ell= \pi/15, a geometric factor of λ=2\lambda= 2 and a total number of filter bands of nb=5n_b = 5. For a detailed analysis the flux fractions Q[b]Q^{[b]} on different subfilter-scales are divided into

Q[b]=⟨ZSR[b]⟩+⟨ZDSR[b]⟩+⟨ZDSM[b]⟩+⟨ZVGS[b]⟩⟨Z∗MSG⟩=QSR[b]+QDSR[b]+QDSM[b]+QVGS[b],(37)Q^{[b]} = \frac{\langle Z_{SR}^{[b]} \rangle+ \langle Z_{DSR}^{[b]} \rangle+ \langle Z_{DSM}^{[b]} \rangle+ \langle Z_{VGS}^{[b]} \rangle}{\langle Z_{*}^{MSG} \rangle} = Q_{SR}^{[b]} + Q_{DSR}^{[b]} + Q_{DSM}^{[b]} + Q_{VGS}^{[b]}, \tag*{(37)}

where QSR[b]Q_{SR}^{[b]}, QDSR[b]Q_{DSR}^{[b]}, QDSM[b]Q_{DSM}^{[b]} and QVGS[b]Q_{VGS}^{[b]} are the flux fractions resulting from strain rotation (SR), differential strain rotation (DSR), differential strain magnification (DSM) and vorticity gradient stretching (VGS), respectively. All the flux channels are further decomposed into their coherent (cc), residual (rr) and mixed (crcr) contributions, e.g. the fraction of the SR is decomposed as QSR[b]=QSR,c[b]+QSR,r[b]+QSR,cr[b]Q_{SR}^{[b]} = Q_{SR,c}^{[b]} + Q_{SR,r}^{[b]} + Q_{SR,cr}^{[b]}. All these contributions are illustrated in Figure 8.

Second-order MSG flux fractions for the length scale bands

Figure 8. Second-order MSG flux fractions for the length scale bands in the range of b∈[0,5]b \in[0,5] originating from SR QSR[b]Q^{[b]}_{SR} (green), DSR QDSR[b]Q^{[b]}_{DSR} (violet), DSM QDSM[b]Q^{[b]}_{DSM} (blue), and VGS QVGS[b]Q^{[b]}_{VGS} (orange) contributions, decoded into their corresponding coherent (subscript c), residual (subscript r), and mixed (subscript cr) parts. The varying coherent criteria are compared for every bb in the following order: VM, OW criterion, f-FTLE and b-FTLE.

As already discussed by Xiao et al. (2009), the MSG flux Z∗MSGZ_{*}^{MSG} exhibits the locality behavior predicted by the test-field model (TFM) closure of Kraichnan (1971). Thus, it is not surprising in Figure 8 that the majority of the contributions do not result from strongly local interactions b=0b = 0, but rather from non-local interactions b∈[1,3]b \in[1,3], with a decreasing influence from highly non-local interactions b≥4b \ge4, with bb being a measure of the scale locality of nonlinear interactions. The first-order MSG flux only consists of the SR term ZSR[b]Z_{SR}^{[b]}, which has no contribution to the strongly local interactions (QSR[0]=0Q_{SR}^{[0]} = 0) (Xiao et al. 2009; Eyink 2006b). Thus, second-order contributions are necessary to sufficiently capture the cross-scale flux. The differential strain magnification ZDSM[b]Z_{DSM}^{[b]} has the lowest overall contribution and is also non-existent for strongly local interactions (QDSM[0]=0Q_{DSM}^{[0]} = 0) (Xiao et al. 2009; Eyink 2006b). Hence, its effect originating from coherent and residual parts are not further analysed with respect to strain-rate alignment properties.

In Figure 8 the relative contributions of the coherent, residual and mixed parts to each flux channel are nearly independent of the scale locality bb and the specific coherence definition. The simple VM method represents a notable exception generally yielding increased coherent flux contributions at the cost of the residual fluxes. As already mentioned above, this is the consequence of the simple gauge criterion chosen in § 5.1 that is not capable of eliminating all differences between the detection methods. Test simulations (not shown) indicate that the VM method is more robust than the LCS techniques to variations of the threshold value with regard to the scaling of the vortex number density, but exhibits a stronger and monotonic impact of the threshold on the relative importance of the different MSG flux fractions than the LCS methods. The gauging procedure thus leads to an effective relative threshold decrease for the VM method compared to the other more complex coherence specifications, illustrating the difficulty of neutralizing all differences between the coherence specifications. The flux fractions mostly reflect the decomposed Fourier cross-scale flux contributions already presented in Figure 5 above. For example, the f-FTLE criterion has small coherent cross-scale flux contributions Zc,c,cE(k)Z_{c,c,c}^{E}(k) throughout the inertial range in Figure 5 (c), and the coherent fractions QSR,c[b]Q_{SR,c}^{[b]}, QDSR,c[b]Q_{DSR,c}^{[b]}, QDSM,c[b]Q_{DSM,c}^{[b]}, and QVGS,c[b]Q_{VGS,c}^{[b]} of the MSG flux in Figure 8 are small for all of the flux channels as well, except for the VM method as mentioned above. We associate the lack of substantial SR and VGS of the coherent structures with their shape preservation characteristic. In contrast, the residual fractions QSR,r[b]Q_{SR,r}^{[b]}, QDSR,r[b]Q_{DSR,r}^{[b]}, QDSM,r[b]Q_{DSM,r}^{[b]}, and QVGS,r[b]Q_{VGS,r}^{[b]} have a much higher contribution in all these MSG flux channels, which is also reflected by the residual cross-scale flux Zr,r,rE(k)Z_{r,r,r}^{E}(k). Additionally, the coherent cross-scale flux of the VM criterion is decreasing, while the residual flux is increasing for higher wavenumbers in the inertial range in Figure 5 (a). This is also reflected by the MSG flux fractions in Figure 8. There, the coherent fractions of all MSG flux channels decrease, while the residual fractions increase for lower scale locality. These observations are a first sign that vortex thinning plays a minor role in coherent structures and is more active in the residual counterpart instead. Lastly, similar to the decomposed cross-scale fluxes in Figure 5 (a)-(Figure 5d), the mixed interactions QSR,cr[b]Q^{[b]}_{SR,cr}, QDSR,cr[b]Q^{[b]}_{DSR,cr}, QDSM,cr[b]Q^{[b]}_{DSM,cr}, and QVGS,cr[b]Q^{[b]}_{VGS,cr} contribute to almost half of the fractions in all MSG flux channels in Figure 8. However, this does not imply that coherent-residual interactions lead to an enhanced thinning mechanism, since the MSG cross-scale flux of the mixed contribution Z∗,crMSGZ^{MSG}_{*,cr} in equation (28) consists of four different heterogeneous strain-rate and stress components. We leave the analysis of these heterogeneous interactions for future investigations.

According to the numerical studies of Xiao et al. (2009) and as described in § 4.3, the vortex thinning mechanism is geometrically quantified by the rotation angles δα[b]\delta\alpha^{[b]} and δβ[b]\delta\beta^{[b]}, which are illustrated in Figure 1 (b) and (Figure 1c), respectively. Conditioning the angle δα[b]\delta\alpha^{[b]} onto the band-pass filtered vorticities ω[b]\omega^{[b]} allows us to obtain statistics of the rotation angle behavior between the large scale strain-rate S(0)\mathbf{S}^{(0)} and the band-pass filtered strain-rates S[b]\mathbf{S}^{[b]}, and thus reveals the physical mechanism of the MSG flux contribution originated from the SR term ZSR[b]Z^{[b]}_{SR} in equation (24). A conditioning of the angle δα[b]\delta\alpha^{[b]} onto the band-pass filtered eddy-viscosities νT[b]\nu^{[b]}_{T} allows the analysis of the alignment behavior between the large scale strain-rate S(0)\mathbf{S}^{(0)} and the band-pass filtered stress τ[b]=−νT[b]S[b]\boldsymbol{\tau}^{[b]} = -\nu^{[b]}_{T}\mathbf{S}^{[b]}, which comes from a Newtonian stress-strain relation as already described in § 4.3. From this we are able to infer the physical mechanism of the DSR term ZDSR[b]Z_{DSR}^{[b]} in equation (24), which quantifies the direction of the stress work exertion on the strain-rate field from small to large length scales. Finally, analysing the δβ[b]\delta\beta^{[b]} angle reveals the influence of the VGS mechanism described by ZVGS[b]Z_{VGS}^{[b]} in equation (24). We extend the angle analysis by investigating the angles δαc/r[b]\delta\alpha_{c/r}^{[b]} and δβc/r[b]\delta\beta_{c/r}^{[b]} of the purely coherent and residual contributions based on the equations (30) - (35). According to Figure 9 (b), (Figure 9d) and (Figure 9f) all coherence definitions provide similar results regarding the above mentioned angle statistics. Thus, the following observations and conclusions are made for coherent structures in general, independent of the concrete definition.

Image not extracted

Figure 9. (a): PDFs of strain-rate tensor angles δα[b]\delta\alpha^{[b]} conditioned onto the negative vorticities ω[b]\omega^{[b]}. (b): Expected values of δα[b]\delta\alpha^{[b]}, δαc[b]\delta\alpha_{c}^{[b]} and δαr[b]\delta\alpha_{r}^{[b]} conditioned onto the negative vorticities ω[b]\omega^{[b]}, ωc[b]\omega_{c}^{[b]} and ωr[b]\omega_{r}^{[b]}, respectively, for varying coherence definitions. (c): PDFs of strain-rate tensor angles δα[b]\delta\alpha^{[b]} conditioned onto the positive eddy-viscosities νT[b]\nu_{T}^{[b]}. (d): Expected values of ∣δα[b]∣\left|\delta\alpha^{[b]}\right|, ∣δαc[b]∣\left|\delta\alpha_{c}^{[b]}\right| and ∣δαr[b]∣\left|\delta\alpha_{r}^{[b]}\right| conditioned onto the positive eddy-viscosities νT[b]\nu_{T}^{[b]}, νT,c[b]\nu_{T,c}^{[b]} and νT,r[b]\nu_{T,r}^{[b]}, respectively, for varying coherence definitions. (e): PDFs of angles between the large-scale strain-rate tensor and vorticity gradient vector δβ[b]\delta\beta^{[b]}. (f): Expected values of δβ[b]\delta\beta^{[b]}, δβc[b]\delta\beta_{c}^{[b]} and δβr[b]\delta\beta_{r}^{[b]} for varying coherence definitions.

The closer the angles between the strain-rate tensors δα[b]\delta\alpha^{[b]} are to values of ±π/4\pm\pi/4 (their sign reflecting the sign of ω[b]\omega^{[b]}), the higher the contribution of the SR term ZSR[b]Z_{SR}^{[b]} to the inverse cascade. This rotation angle tendency is exemplarily illustrated in Figure 9 (a) for the negative vorticity condition −ω[b]-\omega^{[b]}, for which the peak of the PDF P(δα[b]∣ω[b]<0)P(\delta\alpha^{[b]} \mid\omega^{[b]} < 0) gradually shifts towards +π/4+\pi/4 with decreasing scale locality, implied by the increasing bb-values (cf. Xiao et al. 2009). This gradual peak shift quantifies SR and the accompanied transformation of circularly shaped structures into shear layers. Thus, investigating the presence of SR is one possibility to show the existence of the thinning process for the total field. Therefore, if we measure the shift of the PDF peak, we are able to determine the SR effect separately for the purely coherent and residual parts. We achieve this by evaluating the conditional expectation values of the angles δα[b]\delta\alpha^{[b]}, δαc[b]\delta\alpha_c^{[b]} and δαr[b]\delta\alpha_r^{[b]} as

E[δα[b]∣(ω[b]<0)],E[δαc[b]∣(ωc[b]<0)],E[δαr[b]∣(ωr[b]<0)].(38)\mathbb{E}\left[\delta\alpha^{[b]} \mid\left(\omega^{[b]} < 0\right)\right],\mathbb{E}\left[\delta\alpha_c^{[b]} \mid\left(\omega_c^{[b]} < 0\right)\right],\mathbb{E}\left[\delta\alpha_r^{[b]} \mid\left(\omega_r^{[b]} < 0\right)\right]. \tag*{(38)}

Figure 9 (b) shows that the conditional expectation values for the coherent structures, independent of the concrete definition, are approximately E[δαc[b]∣(ωc[b]<0)]≈0\mathbb{E}\left[\delta\alpha_c^{[b]} \mid\left(\omega_c^{[b]} < 0\right)\right] \approx0. This means that there is only a minor gradual shift of the PDF peak for coherent structures with decreasing scale locality (increasing bb-values). This leads to the conclusion that SR and therefore thinning effects are barely present within structures of the coherent part. Hence, coherent structures are generally not turned into shear layers and tend to preserve their shape. On the contrary, the residual part exhibits an increased expected value E[δαr[b]∣(ωr[b]<0)]\mathbb{E}\left[\delta\alpha_r^{[b]} \mid\left(\omega_r^{[b]} < 0\right)\right] with decreasing scale locality. Therefore, the background residual field is prone to the development of shear layers and thus has a higher thinning tendency compared to the coherent structures in the system.

The DSR term ZDSR[b]Z_{DSR}^{[b]} has an increasing contribution to the overall inverse cascade, if the angle is ∣δα[b]∣≳π/4\left|\delta\alpha^{[b]}\right| \gtrsim\pi/4 for positive or negative eddy-viscosities ±νT[b]\pm\nu_T^{[b]}, respectively. Therefore, the band-pass filtered stress tensors τ[b]\boldsymbol{\tau}^{[b]} should exhibit parallel or anti-parallel alignments to the large-scale strain-rate tensor S(0)\mathbf{S}^{(0)} based on the eddy-viscosity’s sign in order to maximise the ZDSR[b]Z_{DSR}^{[b]} contribution. The alignment tendency reveals the energy transfer between scales during the vortex thinning procedure. Thus, negative work exertion of the small-scale stress τ[b]\boldsymbol{\tau}^{[b]} on the large-scale strain-rate field S(0)\mathbf{S}^{(0)} is understood as a general energy transfer from small to large length scales enabling an overall inverse energy cascade, whereas positive work exertion allows for a direct energy cascade. The PDF of the angles exemplarily conditioned onto the positive eddy-viscosity P(δα[b]∣νT[b]>0)P(\delta\alpha^{[b]} \mid\nu_T^{[b]} > 0) for the total field is presented in Figure 9 (c) and shows that the angle becomes ∣δα[b]∣>π/4\left|\delta\alpha^{[b]}\right| > \pi/4 for b≥3b \ge3 (cf. Xiao et al. 2009). This reveals the negative work exertion of the small-scale stress τ[b]\boldsymbol{\tau}^{[b]} on the large-scale strain-rate tensor S(0)\boldsymbol{S}^{(0)}, as depicted in Figure 1 (b), and leads to the conclusion that the vortex thinning mechanism facilitates the energy transfer from small to large length scales for the entire field. The conditional expectation values of the angles δα[b]\delta\alpha^{[b]}, δαc[b]\delta\alpha_c^{[b]} and δαr[b]\delta\alpha_r^{[b]},

E[∣δα[b]∣|(νT[b]>0)], E[∣δαc[b]∣|(νT,c[b]>0)], E[∣δαr[b]∣|(νT,r[b]>0)],(39)\mathbb{E}\left[\left|\delta\alpha^{[b]}\right|\middle|\left(\nu_T^{[b]}>0\right)\right],\ \mathbb{E}\left[\left|\delta\alpha_c^{[b]}\right|\middle|\left(\nu_{T,c}^{[b]}>0\right)\right],\ \mathbb{E}\left[\left|\delta\alpha_r^{[b]}\right|\middle|\left(\nu_{T,r}^{[b]}>0\right)\right], \tag*{(39)}

are determined to measure the shift of the maxima towards ∣δα[b]∣>π/4\left|\delta\alpha^{[b]}\right|>\pi/4 for increasing bb-values in Figure 9 (d) and are also used to determine the alignment tendencies of coherent and residual parts. The absolute values ∣δα[b]∣\left|\delta\alpha^{[b]}\right| instead of the original angle δα[b]\delta\alpha^{[b]} are considered, because the PDFs in Figure 9 (c) are symmetric. As a result, Figure 9 (d) shows that the negative work exertion is present within the residual parts for b≥3b\geq3 as the angles become ∣δαr[b]∣>π/4\left|\delta\alpha_r^{[b]}\right|>\pi/4. Although E[∣δαc[b]∣|(νT,c[b]>0)]\mathbb{E}\left[\left|\delta\alpha_c^{[b]}\right|\middle|\left(\nu_{T,c}^{[b]}>0\right)\right] increases for larger bb, the angles for the coherent structures remain at ∣δαc[b]∣<π/4\left|\delta\alpha_c^{[b]}\right|<\pi/4 independent of the scale locality. This means that the coherent part even has the tendency that the coherent band-pass filtered stress tensors τc[b]\boldsymbol{\tau}_c^{[b]} exert positive instead of negative work on the coherent large-scale strain-rate tensor Sc(0)\boldsymbol{S}_c^{(0)}. Thus, energy within coherent structures is not transferred from the small-scale stress to the large-scale strain-rate due to the weak contributions of the thinning mechanism.

Lastly, the VGS term ZVGS[b]Z_{VGS}^{[b]} is dependent on the angles δβ[b]\delta\beta^{[b]} between the contractile direction of the large-scale strain-rate S(0)\boldsymbol{S}^{(0)} and the vorticity gradients ∇ω[b]\nabla\boldsymbol{\omega}^{[b]}. These angles approach zero δβ[b]→0\delta\beta^{[b]}\to0 for decreasing scale locality (increasing bb), as presented in Figure 9 (e) (cf. Xiao et al. 2009), which shows the contribution ZVGS[b]Z_{VGS}^{[b]} for the total field. This quantifies the presence of the vorticity isoline deformation along the stretching direction of the large-scale strain-rate field, as depicted in Figure 1 (b) for the total field. The alignment angles δβc/r[b]\delta\beta_{c/r}^{[b]} between the purely coherent/residual vorticity gradients ∇ωc/r[b]\nabla\boldsymbol{\omega}_{c/r}^{[b]} and the purely coherent/residual contractile direction of the strain-rate tensor Sc/r(0)\boldsymbol{S}_{c/r}^{(0)} are used to measure the effect of VGS in the coherent and residual parts of the flow respectively. The following expected values

E[δβ[b]], E[δβc[b]], E[δβr[b]],(40)\mathbb{E}\left[\delta\beta^{[b]}\right],\ \mathbb{E}\left[\delta\beta_c^{[b]}\right],\ \mathbb{E}\left[\delta\beta_r^{[b]}\right], \tag*{(40)}

for the total, coherent and residual fields are illustrated in Figure 9 (f). The expected value for the residual angle E[δβr[b]]\mathbb{E}\left[\delta\beta_r^{[b]}\right] decreases for large scale separations (increasing bb), indicating the presence of the VGS in the residual part and thus is another indicator of the thinning mechanism. For the coherent part E[δβc[b]]\mathbb{E}\left[\delta\beta_c^{[b]}\right] is close to π/4\pi/4 for all values of bb. This implies the physical picture that the coherent large-scale strain-rate tensor Sc(0)\boldsymbol{S}_c^{(0)} is not distorting the vorticity isolines, which ultimately leads to a shape preservation of coherent structures.

In conclusion, the small cascade efficiency of coherent structures is caused by their shape preserving nature determined by the depletion of ZSR,c[b]Z_{SR,c}^{[b]} and ZVGS,c[b]Z_{VGS,c}^{[b]} terms independent of the scale separations bb in combination with the positive work exertion of the small-scale stresses on the large scale strain-rate, as captured by the ZDSR,c[b]Z_{DSR,c}^{[b]} term. In contrast, the higher flux efficiency in the residual parts of the flow is caused by the enhanced thinning mechanism quantified by the ZSR,r[b]Z_{SR,r}^{[b]} and ZVGS,r[b]Z_{VGS,r}^{[b]} contributions and the negative work exertion captured in the ZDSR,r[b]Z_{DSR,r}^{[b]} term.

Conclusions

The present investigation deals with the nonlinear dynamics of coherent and residual structures in pseudospectral DNS of two-dimensional Navier-Stokes turbulence forced at small scales. This involves the application of three commonly applied coherence detection schemes based on the OW criterion, on the VM, and on LCSs to identify and to isolate the respective flow components. Among these threshold-based detection methods, the VM technique and the LCS approach are gauged by using statistical properties of detected structures to improve comparability of the detection results. Using this setup, (ii) the performance of the employed detection methods is discussed in relation to each other, (iiii) the coherent and residual contributions to the cross-scale energy flux of the inverse turbulent cascade are analyzed in spectral Fourier as well as in configuration space to study their role for the characteristics and for the dynamics of the respective parts of the flow.

We find that, (ii), under application of the chosen gauge criterion and in comparison with the VM scheme the OW method exhibits a bias towards largest-scale and most energetic structures. In contrast, the LCS scheme shows an increased susceptibility for small-scale coherence as compared to the VM method. Both tendencies can largely be neutralized by adjusting the free parameters of the VM and the LCS methods to yield the same scale-dependency of the vortex number density as the OW specification.

With respect to the role of detected coherent structures for turbulence dynamics, (iiii), we find that they are responsible for a pollution of the phenomenologically expected spectral scaling of the kinetic energy spectrum E(k)∼k−5/3E(k) \sim k^{-5/3} at largest spatial scales. This finding is supported by the largely unaffected k−5/3k^{-5/3}-scaling observed in the energy spectrum of the residual (incoherent) fraction of the turbulent fluctuations. The observation suggests the possible use of coherence detection and decomposition in DNS of homogeneous turbulence for the reduction of the large-scale condensation of inversely cascading quantities for physical systems that feature inverse cascades, e.g. two-dimensional Navier-Stokes turbulence or magnetohydrodynamic turbulence.

The application of a spatial scale-filter approach for the analysis of the nonlinear dynamics of coherent and residual parts of the turbulent flow indicates a high nonlinear activity within coherent structures. The finding shows that coherent structures in two-dimensional Navier-Stokes turbulence are in general dynamically sustained while the spatial structure of the dynamics yields a shape-preserving depletion of the nonlinear cross-scale flux with regard to the entire structure. This is in agreement with the observed coherent Fourier cross-scale energy fluxes and the low flux efficiency due to the high misalignment tendencies of coherent strain-rate and subgrid stress tensors. The shape preservation of coherent structures in this case is verified by employing the MSG expansion of the coherent spatial cross-scale energy fluxes that exhibits a clear depletion of the deformation processes that are scale-flux generating. These findings suggest to employ the depletion of the MSG contributions of SR and VGS as markers for structural coherence in two-dimensional turbulent flows.

The inverse cascade is instead driven by a combination of (ii) interactions entirely among residual fluctuations and of (iiii) nonlinear interactions between coherent structures and residual fluctuations. The former contribution is strongest at small scales while the latter dominates at large scales. This suggests that two different physical processes are responsible for the respective energy fluxes. For the first contribution the dominant physical process has recently been introduced as vortex thinning. This is in line with the enhanced alignment properties of the residual strain-rate and subgrid stress tensors, yielding a high flux efficiency. The second contribution is the dominant flux contribution and stays on a relatively high and roughly constant level throughout the inverse flux region. We abstain from ascribing this flux contribution to more specific physical dynamics as multiple factors may be determining its characteristics due to the heterogeneous character of the interacting strain-rate and stress tensor fields. Further work is presently being pursued along these directions.

Acknowledgements

The authors thank B. Beck, R. Mäusle, J. Reiss, and J.-M. Teissier for fruitful discussions. This work was supported by the German Research Foundation (DFG) within the Research Training Group GRK 2433. Computing resources from the Max Planck Computing and Data Facility (MPCDF) are also acknowledged. Declaration of Interests. The authors report no conflict of interest.

Appendix A

Vorticity decomposition

After thresholding according to one of the investigated coherence criteria in the fashion of equations (2.3) and (2.4), the nonzero scalar values of the vorticity field are clustered. All adjacent neighboring nonzero pixels (maximum of four neighbors for each pixel) are grouped into separately countable and connected clusters. Then, clusters whose number of pixels are below the forcing area of Af=π(ℓf/2)2A_f = \pi(\ell_f/2)^2, with ℓf=2π/kf\ell_f = 2\pi/k_f the forcing length scale, are excluded and discarded from the coherent field. After that, a 5×55 \times5 smooth Gaussian filter is applied to avoid regularity issues caused by sharp boundaries. This leads to the coherent vorticity field ωcsmooth\omega_c^{smooth}. The residual field is obtained by subtraction,

ωr=ω−ωcsmooth.(41)\omega_r = \omega- \omega_c^{smooth}. \tag*{(41)}

Efficient FTLE calculation

From a technical viewpoint, integrating larger amounts of Lagrangian tracers to sufficiently resolve a turbulent flow in space and time requires substantial computational resources. Thus, we utilize an efficient numerical technique, as suggested by Finn & Apte (2013), to simultaneously calculate the flowmap Ft0tF_{t_0}^{t} forward and backward in time by employing a Lagrangian and a semi-Lagrangian scheme, respectively. The forward-in-time/Lagrangian scheme advects passive tracers for an integration time TT according to the underlying velocity field, which generate the forward-in-time flowmap, Ft0t0+TF_{t_0}^{t_0+T}. The backward-in-time/semi-Lagrangian scheme, introduced by Leung (2011), is based on the solution of level-set equations and constructs the backward-in-time flowmap, Ft0t0−TF_{t_0}^{t_0-T}, by tracking coordinates on an Eulerian grid.

For an increased temporal resolution of the FTLE fields, a flowmap composition method, proposed by Brunton & Rowley [7], is applied as

Ft0t0+T=Ft0+(N−1)ht0+Nh∘⋯∘Ft0+ht0+2h∘Ft0t0+h,(42)F_{t_0}^{t_0+T} = \mathcal{F}_{t_0+(N-1)h}^{t_0+Nh} \circ\cdots\circ\mathcal{F}_{t_0+h}^{t_0+2h} \circ F_{t_0}^{t_0+h}, \tag*{(42)}

where ∘\circ is the composition operator, NN the number of substeps, h=100h=100 the flowmap substep and I\mathcal{I} the interpolation operator. A second-order Runge-Kutta integration scheme is applied for particle integration and a cubic interpolation scheme, suggested by Staniforth & Côté (1991), is used for the interpolation operator and the mapping of particles between grid points.

MSG flux derivation

The multi-gradient nature of the approach arises from a Taylor expansion

δu(b,m)(r;x)=∑p=1m1p!(r⋅∇)pu(b)(x)(43)\delta u^{(b,m)}(\boldsymbol{r};\boldsymbol{x})=\sum_{p=1}^{m}\frac{1}{p!}(\boldsymbol{r}\cdot\nabla)^p u^{(b)}(\boldsymbol{x}) \tag*{(43)}

of the filtered velocity increments δu(b)(r;x)=u(b)(x+r)−u(b)(x)\delta u^{(b)}(\boldsymbol{r};\boldsymbol{x})=u^{(b)}(\boldsymbol{x}+\boldsymbol{r})-u^{(b)}(\boldsymbol{x}) with separation vector r\boldsymbol{r}, which is subject to the filtering operation given by equation (22). The filtered subgrid stress tensor τ(b)\boldsymbol{\tau}^{(b)} can then be entirely expressed by the Taylor expanded velocity increments instead of the original increments δu(b)(r)\delta u^{(b)}(\boldsymbol{r}). This yields (cf. Eyink 2006a)

τ(b,m)=∫Gl(r)δu(b,m)(r)δu(b,m)(r) d2r−∫Gl(r)δu(b,m)(r) d2r∫Gl(r)δu(b,m)(r) d2r,(44)\boldsymbol{\tau}^{(b,m)}=\int G_l(\boldsymbol{r})\delta\boldsymbol{u}^{(b,m)}(\boldsymbol{r})\delta\boldsymbol{u}^{(b,m)}(\boldsymbol{r})\,\mathrm{d}^2\boldsymbol{r} -\int G_l(\boldsymbol{r})\delta\boldsymbol{u}^{(b,m)}(\boldsymbol{r})\,\mathrm{d}^2\boldsymbol{r}\int G_l(\boldsymbol{r})\delta\boldsymbol{u}^{(b,m)}(\boldsymbol{r})\,\mathrm{d}^2\boldsymbol{r}, \tag*{(44)}

where τ(b,m)\boldsymbol{\tau}^{(b,m)} is a multi-scale and multi-gradient expression for the stress.

It can be shown that the MSG expanded stress converges as lim⁡m→∞τ(b,m)=τ(b)\lim_{m\to\infty}\boldsymbol{\tau}^{(b,m)}=\boldsymbol{\tau}^{(b)} in the L1L^1-norm. Nevertheless, for increasing scale indices bb, which corresponds to adding finer-scale structures, a growing amount of space gradients of higher-order, mm, is required to approximate τ(b,m)≈τ(b)\boldsymbol{\tau}^{(b,m)}\approx\boldsymbol{\tau}^{(b)}. Therefore, a coherent-subregions approximation (CSA) approach is suggested by Eyink (2006a) enabling the approximation of the MSG stress by low-order gradients mm. As a result, the CSA corrected MSG stress is obtained, which is more accurately approximated as τ∗(b,m)≈τ(b,m)\boldsymbol{\tau}^{(b,m)}_* \approx\boldsymbol{\tau}^{(b,m)} with fewer gradients mm. According to Eyink (2006b) and Xiao et al. (2009), the best approximation with regard to the original cross-scale flux term is reached for expansions up to the second-order in gradients m=2m=2. For the sake of brevity we define τ∗MSG=τ∗(b,2)\boldsymbol{\tau}^{MSG}_*=\boldsymbol{\tau}^{(b,2)}_* and Z∗MSG=Z∗(b,2)\boldsymbol{Z}^{MSG}_*=\boldsymbol{Z}^{(b,2)}_*, which are the MSG-CSA stress and cross-scale flux, respectively, expanded to second order, giving

Z∗MSG=−S(0):τ∗MSG=−∑b=0nb[−C‾2[b]2ℓω2,[b](S(0):S~[b])+C‾4[b]8ℓb4(∇ω[b]⋅∇α[b])(S(0):S[b])−C‾4[b]16ℓb4(∇ω[b]⋅∇ln⁡σ[b])(S(0):S~[b])+C‾4[b]32ℓb4(∇ω[b])TS(0)(∇ω[b])]−(∇ψ∗(nb))TS(0)(∇ψ∗(nb)),(45)\begin{aligned} Z_{*}^{MSG}=-\mathbf{S}^{(0)}:\boldsymbol{\tau}_{*}^{MSG} \\ &=-\sum_{b=0}^{n_b}\left[ -\frac{\overline{C}_{2}^{[b]}}{2}\ell_{\omega}^{2,[b]}\left(\mathbf{S}^{(0)}:\widetilde{\mathbf{S}}^{[b]}\right) +\frac{\overline{C}_{4}^{[b]}}{8}\ell_{b}^{4}\left(\nabla\omega^{[b]}\cdot\nabla\alpha^{[b]}\right)\left(\mathbf{S}^{(0)}:\mathbf{S}^{[b]}\right) -\frac{\overline{C}_{4}^{[b]}}{16}\ell_{b}^{4}\left(\nabla\omega^{[b]}\cdot\nabla\ln\sigma^{[b]}\right)\left(\mathbf{S}^{(0)}:\widetilde{\mathbf{S}}^{[b]}\right) +\frac{\overline{C}_{4}^{[b]}}{32}\ell_{b}^{4}\left(\nabla\omega^{[b]}\right)^{T}\mathbf{S}^{(0)}\left(\nabla\omega^{[b]}\right) \right] -\left(\nabla\psi_{*}^{(n_b)}\right)^{T}\mathbf{S}^{(0)}\left(\nabla\psi_{*}^{(n_b)}\right), \tag*{(45)} \end{aligned}

with the fluctuation stream function ψ∗(nb)\psi_{*}^{(n_b)} (cf. Eyink 2006b) and the coefficients C‾p[b]\overline{C}_{p}^{[b]} (cf. appendix C in Eyink 2006a). The flux contribution from the fluctuation stream function (FSF) ZFSF(nb)Z_{FSF}^{(n_b)} is similarly interpreted as a vorticity gradient stretching but considered much smaller in magnitude due to cancellations from spatial averaging. Additionally, it possesses a positive mean as shown by Xiao et al. (2009), thus a further analysis with regard to the inverse cascade mechanism is neglected for this term.

Appendix B

The present coherent structure analysis is based on DNS of the two-dimensional Navier-Stokes equations. In this section, we briefly discuss the choice of system parameters, with regard to the dynamics of structure formation and turbulence statistics.

In contrast to other studies [see 6, 1] (Maltrud & Vallis 1993; Danilov & Gurarie 2001; Vallgren 2011; Burgess & Scott 2018), the present work does not employ a hyperviscous dissipation term to avoid the accompanying unphysical distortion of the spatial structure of the flow. Although this shortens the scaling-range of the enstrophy cascade, the resulting spectral extent still suffices for our purposes, as shown by the spectra and enstrophy fluxes in Figure 2 (c) and (Figure 2d), and Figure 10. We have found no further implications for other diagnostics relevant in the context of the present investigation.

Image not extracted

Figure 10. Kinetic energy spectra E(k)E(k) of run2 and 3 with varying kinetic energy injection rates (left) with inset showing the compensated spectra E(k)k5/3ϵI−2/3E(k)k^{5/3}\epsilon_I^{-2/3}, where the black dashed line indicates a value of CE=6.69C_E = 6.69 predicted by the TFM closure of Kraichnan (1971). Normalised cross-scale kinetic energy ZE(k)/ϵIZ^E(k)/\epsilon_I (top right) and enstrophy fluxes ZΩ(k)/ηIZ^\Omega(k)/\eta_I (bottom right) from run2 and 3, respectively.

The formation of structures is dependent on the energy injection rate ϵI\epsilon_I and therefore we vary its rate for fixed viscosity ν\nu and large-scale friction values (k0,ω,σ2,αω)(k_{0,\omega},\sigma^{2},\alpha_{\omega}), which also affects the ratio of energy dissipated at largest scales with rate ϵα\epsilon_{\alpha} and at viscous scales with rate ϵν\epsilon_{\nu}. Due to the unavoidably limited spectral bandwidth of the numerical simulations, it is not possible to fulfill both requirements of the KLB picture at the same time, namely a ratio of ϵα/ϵI=1\epsilon_{\alpha}/\epsilon_I=1, such that all the injected energy is dissipated at large-scales, in combination with an exact power-law ∼k−5/3\sim k^{-5/3} for the energy scaling-range. Even DNS at significantly higher numerical resolution (see e.g. Boffetta & Musacchio 2010) exhibit smaller deviations from the asymptotic scaling exponent. We observe, that simultaneously only one of the two characteristics is approximately realisable with sufficient accuracy. Therefore, three simulation runs are performed, as listed in Table 2. Next to numerical resolution and the large-scale damping required for quasi-stationarity of the flow, the large-scale driving, i.e. the energy injection rate ϵI\epsilon_I, exerts an important influence on the system.

According to Figure 2 (c), run1 with the highest energy injection rate exhibits the strongest deviation from the k−5/3k^{-5/3} scaling, but the best developed normalised cross-scale energy ZE(k)/ϵIZ^E(k)/\epsilon_I and enstrophy fluxes ZΩ(k)/ηIZ^\Omega(k)/\eta_I (Figure 2 (d)) close to values of −1-1 and 1 in the energy and enstrophy inertial ranges, respectively. Run3 with the lowest energy injection rate in Figure 10 is the closest to fulfill the power-law but displays weaker nonlinear fluxes. Although claims exist that relate the large-scale steepening of the energy spectrum to the large-scale damping leading to the formation of large-scale coherent vortices at largest scales (see [see 6] (Danilov & Gurarie 2001)), other studies show that vortex formation already occurs on smaller scales and is not entirely an artifact due to hypofriction effects (see [see 1, 8] (Vallgren 2011)). Therefore, it appears to be plausible that the formation of coherent structures in configuration space is an inherent property of two-dimensional turbulence not captured by the wavenumber-based KLB phenomenology. This structure formation property has the tendency to pollute the scaling of the energy spectrum, which is further discussed in § 5.

With decreasing energy injection rate the vorticity field has less distinct coherent features as shown in Figure 2 (b) and Figure 11 (a) and (Figure 11b), where single vortex structures become less intense and gradually dissolve into the residual background, similarly observed by Burgess & Scott [8]. At the same time the probability density function (PDF) of the vorticity becomes flatter with increasing injection rates according to Figure 11 (c), where the increasing values at the tails of the PDFs are associated to the large vorticity values in the visible vortex cores. For the present analysis run1 is used, due to the most visible presence of coherent structures and the stronger spectral cross-scale flux in the inverse cascade regime compared to the other DNS. However, the remaining DNS, run2 and run3, also lead to qualitatively similar results. This suggests that the similarity scaling is not the determining factor for the inverse cascade dynamics of coherent structures.

Image not extracted

Figure 11. (a), (b): Vorticities of run2 and 3 from a 102421024^2 region, which is 6.25% of the total physical domain. The colorbar is normalised to ω/max⁡∣ω∣\omega/\max|\omega| for a better visual comparison of structures from varying injection rates. (c): The kurtosis of the vorticity PDFs from runs1-3 are denoted as μ~4\tilde{\mu}_4.

The large-scale damping certainly has a strong and intended effect on the large-scale energetics that naturally extends over a limited spectral range into the smaller-scale dynamics. The high level of isotropy of the damping mechanism, however, is an effort to avoid additional severe nuisances such as violent and random artificial straining or other unwanted anisotropic processes. Although comparison with similar works without applied large-scale damping suggests that the damping does not lead to even more severe artefacts with regard to coherence dynamics as already inflicted by the finite-size of the system. Such unwanted side-effects in particular with regard to the higher-order MSG results can of course not be fully ruled out. Furthermore, the impact of numerical resolution, as observed in test simulations with a monotonically decreasing number of collocation points down to 2562256^2 reveals that the three-regime signature of the vortex number density already becomes less discernible at a resolution of 204822048^2. The qualitative results obtained via the MSG expansion, in contrast, remain unchanged and observable for all tested resolutions.

References

  1. [1]Babiano, A., Basdevant, C., Legras, B. & Sadourny, R. 1987 Vorticity and passive-scalar dynamics in two-dimensional turbulence. Journal of Fluid Mechanics 183, 379–397.DOI
  2. [2]Batchelor, G. K. 1969 Computation of the energy spectrum in homogeneous two-dimensional turbulence. The Physics of Fluids 12, 233–239.DOI
  3. [5]Boffetta, G. & Musacchio, S. 2010 Evidence for the double cascade scenario in two-dimensional turbulence. Physical Review E 82, 016307.pubmed.ncbi.nlm.nih.gov/20866725
  4. [6]Borue, V. 1994 Inverse energy cascade in stationary two-dimensional homogeneous turbulence. Physical Review Letters 72 (10), 1475–1478.pubmed.ncbi.nlm.nih.gov/10055618
  5. [7]Brunton, S. L. & Rowley, C. W. 2010 Fast computation of finite-time lyapunov exponent fields for unsteady flows. Chaos 20, 017503.DOI
  6. [8]Burgess, B. H. & Scott, R. K. 2017 Scaling theory for vortices in the two-dimensional inverse energy cascade. Journal of Fluid Mechanics 811, 742–756.DOI

Paper details

vlnc:W_sxmxxpng
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents