betaFeedback

WorksPhysics and Astronomy

Grain Boundary Segregation Models for High-Entropy Alloys: Theoretical Formulation and Derived Analytical Expressions to Elucidate High-Entropy Grain Boundaries

Abstract

Grain boundary (GB) segregation models are derived for multi-principal element and high-entropy alloys (MPEAs and HEAs). Differing from classical models where one component is taken as solvent and others are considered solutes, these models are referenced to the bulk composition to enable improved treatments of MPEAs and HEAs with no principal components. An ideal solution model is first formulated and solved to obtain analytical expressions that predict GB segregation and GB energy in MPEAs and HEAs. A regular solution model is further derived. The GB composition calculated using the simple analytical expression derived in this study and data from the Materials Project agree well with a prior sphosipcated atomistic simulation for NbMoTaW. The simplicity of the derived analytical expressions makes them useful for not only conveniently predicting GB segregation trends in HEAs, but also analyzing nascent interfacial phenomena in composionally complex GBs. As an application example, the derived models are used to further formulate a set of useful equations to elucidate an emergent concept of high-entropy grain boundaries (HEGBs).

Introduction

Grain boundary (GB) segregation (a.k.a. adsorption) is one of the most classical and important phenomena in physical metallurgy and ceramics. Various statistical thermodynamic models for GB segregation have been developed and discussed by McLean,[1] Fowler and Guggenheim,[2] Hondros and Seah,[3] Lejček and Hofmann,[4] Wynblatt et al.,[5, 6, 7] and many others (see, e.g., a book[8] by Lejček). While many of prior models focused on binary systems, statistical thermodynamic models for GB segregation in conventional multicomponent alloys with one principal element, most notably the classical Guttmann model for ternary alloys,[9] have also been derived.

High-entropy alloys (HEAs), which are broadly defined as multi-principal element alloys (MPEAs), have received substantial research interests.[10, 11, 12, 13] Understanding GB segregation in HEAs and MPEAs is both scientifically interesting and technologically important. A limited number of atomistic simulations have been performed to model GB segregation in HEAs and MPEAs,[14, 15] which generally represent complex and time-consuming tasks. GB segregation in HEAs have also been modeled by simplified density and CALPHAD based approaches.[16, 17] Overall, GB segregation in HEAs and MPEAs has not yet been thoroughly investigated, in part due to the compositional complexity that makes quantitative analyses challenging.

Recently, an emergent concept of high-entropy grain boundaries (HEGBs) has been proposed[18] and further elaborated[19] as the GB counterparts to HEAs. It was proposed that effective GB entropy can be positive and increase with increasing number of components in saturated multicomponent alloys (where the chemical potentials are pinned by precipitated secondary phases).[18, 19] Such HEGBs can possess reduced GB energy and an increased total adsorption amount with increasing temperature, which can subsequently stabilize nanocrystalline alloys (nanoalloys) at high temperatures.[18, 19]

Prior statistical thermodynamic models for GB segregation assume one principal component as the solvent with one or more minor component(s) as the solute(s). Differing from classical models, here I formulate GB segregation models referencing to the bulk composition to enable improved treatments of HEAs and MPEAs with no principal component. Such models can also be applied to a conventional multicomponent alloy with one principal component (e.g., to analyze so-called Type I HEGBs in § 8-A). In this work, an ideal solution model is first formulated and solved to obtain analytical expressions to predict GB segregation and GB energy. Subsequently, a regular solution model is derived. It is shown that the GB composition calculated using a simple analytical expression derived in this work and data readily available from the Materials Project agree well with a prior sphiospicated atomistic simulation for NbMoTaW.[20] The models and derived analytical expressions are useful for not only conveniently predicting trends in GB segregation in HEAs, but also analyzing nascent interfacial phenomena in compositionally complex GBs. As an application example, the derived models are used to further formulate a set of useful equations for ideal and symmetric model systems to quantitatively elucidate the emergent concept of HEGBs in § 8.

Theoretical Formulation

Using the Gibbs approach, GB energy of a multicomponent alloy can be expressed as the interfacial excess of grand potential:

γGB=uGBXS−TsGBXS−∑iΓiμiBulk(1)\gamma_{\mathrm{GB}}=u_{\mathrm{GB}}^{\mathrm{XS}}-Ts_{\mathrm{GB}}^{\mathrm{XS}}-\sum_i\Gamma_i\mu_i^{\mathrm{Bulk}} \tag*{(1)}

The first two terms are the contributions from GB excess of internal energy and GB excess of entropy, respectively. In the third term, μi\mu_i is the chemical potential and Γi\Gamma_i is the corresponding GB adsorption amount (interfacial excess) of the ii-th component (i=1,2,3,…,Ni=1, 2, 3, \ldots, N).

The Gibbs adsorption equation states:

dγGB=−sGBXSdT−∑iΓi dμi(2)d\gamma_{\mathrm{GB}}=-s_{\mathrm{GB}}^{\mathrm{XS}}dT-\sum_i\Gamma_i\,d\mu_i \tag*{(2)}

These are the two most fundamental interfacial thermodynamic equations to analyze GB segregation. It should be noted that GB segregation is interfacial adsorption in thermodynamics. Thus, the terminologies “segregation” and “adsorption” are equivalent and used interchangeable in this article.

Derivation of an Ideal Solution Model and Its Analytical Solution

Let me first consider a large-angle twist GB in a multicomponent ideal solution, as schematically shown in Figure 1 (similar to a case of a twist GB with Jmax⁡=1J_{\max}=1 in the Wynblatt et al.’s model for a binary alloy, [7, 21] but being generalized for a multicomponent alloy here). The GB excess of internal energy for an ideal solution can be expressed as:

Schematic illustration of the lattice model for a twist grain boundary

Figure 1. Schematic illustration of the lattice model for a twist grain boundary (GB), which is adapted from the Wynblatt et al.’s model for a twist GB with Jmax⁡=1J_{\max}=1 in a binary alloy,[21] but generalized for a multicomponent alloy (including HEAs and MPEAs) here. Each atom has zz bonds (z=zl+2zvz=z_l+2z_v), including zlz_l lateral bonds within the atomic layer and zvz_v bonds between two neighbor atomic layers parallel to the twist GB. It is assumed that QQ fraction of the bonds is broken at the GB core between the two GB layers of the twist GB (Q=1/6Q=1/6 to represent a general large-angle GB to ensure γGB/γsurface=13\gamma_{\mathrm{GB}}/\gamma_{\mathrm{surface}}=\frac{1}{3} to match typical experimental values). It is assumed, for simplicity, the adsorption is limited at the two GB layers (while acknowledging multilayer adsorption can take place in strong segregation region in regular solutions [21, 24]). The differential bonding energies (due to broken bonds) and strain energy relaxation at the GB sites can drive GB adsorption (a.k.a. segregation).

uGBXS(ideal)=n[zvQ∑iXiGB(−eii)+2zv∑i(XiGB−XiBulk)(−eii)−2∑iXiGBΔEistrain](3)u_{\mathrm{GB}}^{\mathrm{XS}(ideal)}=n\left[z_{\mathrm{v}}Q\sum_i X_i^{\mathrm{GB}}(-e_{ii})+2z_{\mathrm{v}}\sum_i\left(X_i^{\mathrm{GB}}-X_i^{\mathrm{Bulk}}\right)(-e_{ii})-2\sum_iX_i^{\mathrm{GB}}\Delta E_i^{\mathrm{strain}}\right] \tag*{(3)}

Here, nn is the number of atoms in the atomic plane (so that the number of “GB sites” per unit area is Γ0≡2n\Gamma_0\equiv2n for this twist GB (Figure 1), assuming the adsorption is limited within the two GB planes, which is largely true for ideal solutions but an approximation for regular solutions), XiGBX_i^{\mathrm{GB}} and XiBulkX_i^{\mathrm{Bulk}} are the GB and bulk atomic fractions of the ii-th component, zz is the total coordinates (number of bonds per atom), zvz_{\mathrm{v}} is the number of bonds per atom between two adjacent layers, eiie_{ii} (<0<0) is the self-bonding energy of the ii-th component, QQ is the fraction of the broken bonds at the GB core between two GB planes at the twist GB (QQ is set to 1/61/6 to represent an average large-angle general GB to match the empirical relation γGB/γsurface=1/3\gamma_{\mathrm{GB}}/\gamma_{\mathrm{surface}}=1/3), and ΔEistrain\Delta E_i^{\mathrm{strain}} (>0>0) is the strain energy of the ii-th component in the bulk.

For a HEA or MPEA without a principal component, ΔEistrain\Delta E_i^{\mathrm{strain}} should be calculated using the classic Friedel model,[22] but with respect to weighted mean atomic radius and modulus of the bulk phase:

ΔEistrain=24πKiG‾r‾i(r‾−ri)23Kiri+4G‾r‾(4)\Delta E_i^{\mathrm{strain}}=\frac{24\pi K_i\overline{G}\overline{r}_i(\overline{r}-r_i)^2}{3K_i r_i+4\overline{G}\overline{r}} \tag*{(4)}

where rir_i and KiK_i are the atomic radius and bulk modulus of the ii-th component, and r‾\overline{r} and G‾\overline{G} are the weighted means of the atomic radius and shear modulus for the “matrix” phase:

rˉ=∑kXkBulkrkGˉ=∑kXkBulkGk(5)\begin{aligned} \bar{r} &= \sum_k X_k^{Bulk} r_k \\ \bar{G} &= \sum_k X_k^{Bulk} G_k \tag*{(5)} \end{aligned}

It is noted that this model suggests that the strain energy relaxation can take place for a HEA even without GB segregation. This is reasonable because the lattice distortion can cause significant atomic-scale strains inside a bulk HEA phase even in a random solution.

The GB excess configurational entropy can be expressed as:

SGBXS=−Γ0k∑i(XiGBln⁡XiGB−XiBulkln⁡XiBulk),(6)S_{GB}^{XS}=-\Gamma_0 k\sum_i\left(X_i^{GB}\ln X_i^{GB}-X_i^{Bulk}\ln X_i^{Bulk}\right), \tag*{(6)}

where kk is the Boltzmann constant. The adsorption amount (interfacial excess) of the ii-th component is given by:

Γi=Γ0(XiGB−XiBulk).(7)\Gamma_i=\Gamma_0\left(X_i^{GB}-X_i^{Bulk}\right). \tag*{(7)}

The chemical potential of the ii-th component in an ideal solution is:

μiBulk=z2eii+kTln⁡XiBulk.(8)\mu_i^{Bulk}=\frac{z}{2}e_{ii}+kT\ln X_i^{Bulk}. \tag*{(8)}

Combining the above equations, GB energy for a multicomponent ideal solution can be expressed as:

γGB=Γ0[12QZv∑iXiGB∣eii∣−∑iXiGBΔEistrain+∑ikTXiGBln⁡(XiGBXiBulk)].(9)\gamma_{GB}=\Gamma_0\left[\frac{1}{2}QZ_v\sum_i X_i^{GB}\lvert e_{ii}\rvert-\sum_i X_i^{GB}\Delta E_i^{strain}+\sum_i kTX_i^{GB}\ln\left(\frac{X_i^{GB}}{X_i^{Bulk}}\right)\right]. \tag*{(9)}

Using the jj-th component (n≠in\ne i) as a reference, the above equation can be rewritten as:

γGB=γGB,j(0)+Γ0∑i≠jXiGB[12QZv(∣eii∣−∣ejj∣)−ΔEistrain]−Γ0XjGBΔEjstrain+Γ0∑ikTXiGBln⁡(XiGBXiBulk),(10)\gamma_{GB}=\gamma_{GB,j}^{(0)}+\Gamma_0\sum_{i\ne j}X_i^{GB}\left[\frac{1}{2}QZ_v\left(\lvert e_{ii}\rvert-\lvert e_{jj}\rvert\right)-\Delta E_i^{strain}\right]-\Gamma_0X_j^{GB}\Delta E_j^{strain}+\Gamma_0\sum_i kTX_i^{GB}\ln\left(\frac{X_i^{GB}}{X_i^{Bulk}}\right), \tag*{(10)}

where γGB,j(0)(=12Γ0QZv∣ejj∣)\gamma_{GB,j}^{(0)}\left(=\frac{1}{2}\Gamma_0QZ_v\lvert e_{jj}\rvert\right) represents broken-bonds contributed GB energy of the pure component jj without any adsorption and relaxation.

References

  1. [1]D. McLean, Oxford, Clarendon Press (1957).
  2. [2]R. H. Fowler and E. A. Guggenheim, Statistical Thermodynamics (Cambridge University Press, 1939).
  3. [3]E. D. Hondros and M. P. Seah, Metallurgical Transactions 8A, 1363 (1977).
  4. [4]P. Lejcek and S. Hofmann, Critical Reviews in Solid State and Materials Sciences 33, 133 (2008).
  5. [5]P. Wynblatt and R. Ku, Surface Science 65, 511 (1977).
  6. [6]P. Wynblatt and D. Chatain, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 37A, 2595 (2006).
  7. [7]P. Wynblatt, D. Chatain, and Y. Pang, Journal of Materials Science 41, 7760 (2006).
  8. [8]P. Lejcek, Grain boundary segregation in metals, Vol. 136 (Springer Science & Business Media, 2010).DOI
  9. [9]M. Guttmann, Surface Science 53, 213 (1975).
  10. [10]B. Cantor, I. Chang, P. Knight, and A. Vincent, Materials Science and Engineering: A 375, 213 (2004).
  11. [11]J. W. Yeh, S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, and S. Y. Chang, Advanced Engineering Materials 6, 299 (2004).
  12. [12]E. P. George, D. Raabe, and R. O. Ritchie, Nature Reviews Materials 4, 515 (2019).
  13. [13]D. B. Miracle and O. N. Senkov, Acta Materialia 122, 448 (2017).
  14. [14]P. Wynblatt and D. Chatain, Physical Review Materials 3, 054004 (2019).
  15. [15]C. Hu and J. Luo, Materials Horizons 9, 1023 (2022).
  16. [16]L. Li, R. D. Kamachali, Z. Li, and Z. Zhang, Physical Review Materials 4, 053603 (2020).
  17. [17]L. Wang and R. D. Kamachali, Journal of Alloys and Compounds 933, 167717 (2023).
  18. [18]N. Zhou, T. Hu, J. Huang, and J. Luo, Scripta Materialia 124, 160 (2016).
  19. [19]J. Luo and N. Zhou, Communications Materials 4, 7 (2023).
  20. [20]X.-G. Li, C. Chen, H. Zheng, Y. Zuo, and S. P. Ong, npj Computational Materials 6, 70 (2020).
  21. [21]P. Wynblatt and D. Chatain, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 495, 119 (2008).
  22. [22]J. Friedel, Advances in Physics 3, 446 (1954).
  23. [23]M. Guttmann and D. McLean, (ASM, Metals Park, 1979).
  24. [24]N. Zhou, C. Hu, and J. Luo, Acta Materialia 221, 117375 (2021).
  25. [26]P. Lejček, M. Vši͡anská, and M. Šob, Journal of Materials Research 33, 2647 (2018).
  26. [27]M. Černý, P. Šesták, M. Všianská, and P. Lejček, Metals 12, 1389 (2022).
  27. [28]P. Lejček, S. Hofmann, M. Všianská, and M. Šob, Acta Materialia 206, 116597 (2021).
  28. [29]A. Jain, S. P. Ong, G. Hautier, W. Chen, W. D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, and G. Ceder, APL materials 1 (2013).
  29. [30]N. Zhou, T. Hu, and J. Luo, Current Opinion in Solid State and Materials Science 20, 268 (2016).
  30. [31]J. M. Rickman and J. Luo, Current Opinion in Solid State and Materials Science 20, 225 (2016).
  31. [32]P. R. Cantwell, M. Tang, S. J. Dillon, J. Luo, G. S. Rohrer, and M. P. Harmer, Acta Materialia 62, 1 (2014).
  32. [33]J. Luo, Applied Physics Letters 95, 071911 (2009).
  33. [34]J. Luo, Interdisciplinary Materials 2, in press (2023).
  34. [35]J. Luo, Current Opinion in Solid State and Materials Science 12, 81 (2008).
  35. [36]J. Luo, Critical Reviews in Solid State and Material Sciences 32, 67 (2007).
  36. [37]C. Hu and J. Luo, Scripta Materialia 158, 11 (2019).
  37. [38]S. Yang, N. Zhou, H. Zheng, S. P. Ong, and J. Luo, Physical review letters 120, 085702 (2018).
  38. [39]P. R. Cantwell, T. Frolov, T. J. Rupert, A. R. Krause, C. J. Marvel, G. S. Rohrer, J. M. Rickman, and M. P. Harmer, Annual Review of Materials Research 50, 465 (2020).
  39. [40]T. Meiners, T. Frolov, R. E. Rudd, G. Dehm, and C. H. Liebscher, Nature 579, 375 (2020).
  40. [41]F. Cao, Y. Chen, S. Zhao, E. Ma, and L. Dai, Acta Materialia 209, 116786 (2021).
  41. [42]T. Frolov, D. L. Olmsted, M. Asta, and Y. Mishin, Nature communications 4, 1899 (2013).
  42. [43]T. Frolov, M. Asta, and Y. Mishin, Physical Review B 92, 020103 (2015).
  43. [44]M. Tang, W. C. Carter, and R. M. Cannon, Physical Review B 73, 024102 (2006).
  44. [45]S. J. Dillon, M. Tang, W. C. Carter, and M. P. Harmer, Acta Materialia 55, 6208 (2007).
  45. [46]M. Tang, W. C. Carter, and R. M. Cannon, Physical review letters 97, 075502 (2006).
  46. [47]Y. Mishin, W. Boettinger, J. Warren, and G. McFadden, Acta Materialia 57, 3771 (2009).
  47. [48]J. Luo, V. Gupta, D. Yoon, and H. Meyer III, Applied Physics Letters 87, 231902 (2005).
  48. [49]X. Shi and J. Luo, Applied Physics Letters 94, 251908 (2009).
  49. [50]T. J. Rupert, Current Opinion in Solid State and Materials Science 20, 257 (2016).
  50. [51]C. M. Grigorian and T. J. Rupert, Journal of Materials Research 37, 554 (2022).
  51. [52]J. Weissmüller, Nanostructured Materials 3, 261 (1993).
  52. [53]J. Weissmuller, Journal of Materials Research 9, 4 (1994).
  53. [54]C. C. Koch, Journal of Materials Science 42, 1403 (2007).
  54. [55]K. A. Darling, R. N. Chan, P. Z. Wong, J. E. Semones, R. O. Scattergood, and C. C. Koch, Scripta Materialia 59, 530 (2008).
  55. [56]C. C. Koch, R. O. Scattergood, K. A. Darling, and J. E. Semones, Journal of Materials Science 43, 7264 (2008).
  56. [57]N. Zhou and J. Luo, Materials Letters 115, 268 (2014).
  57. [58]A. R. Kalidindi and C. A. Schuh, Acta Materialia 132, 128 (2017).
  58. [59]A. R. Kalidindi, T. Chookajorn, and C. A. Schuh, JOM 67, 2834 (2015).
  59. [60]H. A. Murdoch and C. A. Schuh, Acta Materialia 61, 2121 (2013).
  60. [61]T. Chookajorn, H. A. Murdoch, and C. A. Schuh, Science 337, 951 (2012).
  61. [62]J. R. Trelewicz and C. A. Schuh, Physical Review B 79 (2009).
  62. [64]S. M. Foiles, Scripta Materialia 62, 231 (2010).
  63. [65]M. P. Seah, Journal of Physics F: Metal Physics 10, 1043 (1980).
  64. [66]M. Qin, S. Shivakumar, and J. Luo, Journal of Materials Science 58, 8548 (2023).
  65. [67]X. C. Liu, H. W. Zhang, and K. Lu, Science 342, 337 (2013).
  66. [68]A. J. Detor and C. A. Schuh, Journal of Materials Research 22, 3233 (2007).

Paper details

vlnc:W_sytfsfje
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 11

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents