WorksPhysics and Astronomy
Invertible Optical Nonlinearity in Epsilon-near-zero Materials
Abstract
Epsilon-near-zero (ENZ) materials such as indium tin oxide (ITO), have recently emerged as a new platform to enhance optical nonlinearities. Here we report a theoretical and experimental study on the origin of nonlinearities in ITO thin films that are dominated by two mechanisms based on intraband and interband transitions. We show that there are two competing factors that jointly contribute to a spectrally-invertible nonlinearity of ITO near its ENZ region i.e. the non-parabolicity of the band structure that results in a larger effective mass in the intraband transition and the Fermi energy shift, which determines the free carrier density. Our work reveals the relationship between the large nonlinearity and the intrinsic material properties of the ITO films.
The pursuit of a large optical nonlinearity with a moderate excitation field has been a long-time goal in the study of light-matter interactions. Most approaches that focus on significant enhancement of nonlinearities are based on materials whose refractive index can be drastically modified using an optical pump [1, 2]. Recently, epsilon-near-zero (ENZ) materials have attracted considerable attention due to their intriguing optical properties, such as diverging velocities [3, 4], wavelength expansion [5] and large field enhancement [6, 7, 8]. While the pioneering work focused on realization of ENZ and its linear properties [9, 10], recent studies have revealed the great potential of ENZ materials in nonlinear applications [11]. An intuitive calculation shows that the change of refractive index can be expressed as which becomes significant given a near-zero permittivity .
Transparent conductive oxides (TCOs), a subset of ENZ materials, have emerged as a new platform to enhance optical nonlinearities [12, 13, 14, 15]. Typical examples that have been widely investigated include Al or Ga doped zinc oxides (AZO/GZO) [12, 16, 17], cadmium oxides (CdO) [18, 19] and ITO [20, 21]. These materials support ENZ resonances in the near-infrared (NIR) range and are compatible with existing complementary metal-oxide semiconductor (CMOS) technologies [22, 23], thus show great promise for applications in integrated telecom industries [24]. Moreover, the stability of these materials is better than traditional metals [25] and highly-doped semiconductors [26] that show near-zero at their bulk plasma wavelengths, and therefore can endure larger optical pump fields that can be used to induce larger nonlinearities without reaching the damage threshold. This rich design space for photon manipulation enables different strategies to enhance the nonlinearity, such as the use of patterned structures [27, 28], coupling with plasmonic materials [20, 29, 30, 31] and utilizing waveguide modes [32].
Recent studies have demonstrated the possibility of exploiting transient transmittance (reflectance) spectroscopy to study the temporal dynamics of large nonlinearities [8, 15, 16, 20, 33]. A significant change of refractive index on the order of unity was observed in transient experiments conducted on ITO thin films [6, 34]. The ultrafast transient response in these materials is dominated by two sub-picosecond (ps) processes: (i) Intraband transition excited by pump photons with sub-bandgap energies; and (ii) Interband transition, pumped with high energy photons such as UV region photons. Understanding the origin of the nonlinearity observed in ultrafast experiments necessitates effective modelling of these two processes [6, 20, 21]. Interband transition is described by carrier generation followed by trap-assisted recombination [8]. For intraband transitions, an optical Kerr effect model was proposed, where the plasma frequency or the refractive index is linearly dependent on the pump intensity, enabling reasonable quantitative description of the nonlinearity [15, 35]. Specifically, the two-temperature model reveals that the rise of the electron temperature due to laser excitation generates temperature-dependent complex index [6, 8, 20]. This approach uses fitting parameters, such as electron-phonon coupling strength determined from time-resolved index change measurements . Alternatively, a deterministic (fitting parameter free) physical model attributed the nonlinearity to the non-parabolic conduction band structure, which greatly modifies the electron effective mass for the excited hot electron population [19, 28, 36, 37]. However, to our knowledge, no unified approach exists to date that describes the excited state dynamics and instead existing research models these mechanisms as separate processes when explaining the origin of the nonlinearity, while their joint contributions and simultaneous interactions remain unexplored. Specifically, the influence of the non-parabolicity on the interband transition has never been investigated.
Here, we explore the interaction and competition of the intraband and interband transitions in ITO films and report on a novel mechanism where the sign of the nonlinearity can be inverted. Our theoretical model predicts that by varying the non-parabolicity and the Fermi level of ITO, the ENZ resonance shift can be tuned to occur in opposite spectral directions. This optical switching of ENZ resonances gives rise to transient transmittance signals with highly variable spectral shapes. The theoretical predictions are validated using femtosecond (fs) pump-probe measurements with broadband probe beams on ITO thin films that have tunable ENZ wavelengths and demonstrate spectrally invertible nonlinearities. The non-parabolicity of the band structure, which contributes to a larger effective mass in the intraband transition, and also the Fermi energy, which determines the free carrier density, are shown to be two competing factors that jointly contribute to the invertible nonlinearity of ITO thin films.
Our work reveals the relationship between the large optical nonlinearity and the intrinsic dispersion relationships of ITO films in the ENZ region, which will enable design and development of TCO photonic materials and nonlinear devices. The ultrafast all-optical active control demonstrated here will aid applications such as all-optical modulators, integrated telecom circuits and other nonlinear photonic devices.
Fig. 1a shows the linear optical properties of a 23 nm thick commercial ITO film on a glass cover slip. The oblique-angle transmittance measurements reveal a resonance peak at 1240 nm corresponding to the ENZ wavelength of ITO. The amplitude of the peak increases at larger incident angles, whereas normal incidence does not reveal an ENZ peak. Maxwell’s boundary conditions show that
where and are permittivity of air and the ITO film, respectively, and and are the normal components of electric field on both sides close to the ITO surface. Therefore, given a small in proximity to the ENZ region, the field normal to the ITO film would be enhanced with larger incident angles producing larger normal components of the field and hence a stronger field enhancement.
To obtain the permittivity of the ITO thin film, a Drude model is adopted and the transmittance is calculated using transfer matrix method (TMM) with the fitted Drude parameters and . The dashed curves in Figure 1a show the calculation result using eV and eV which show good agreement with the experimental measurements. The calculated dispersion of ITO with these Drude parameters is shown in Figure 1b. The real part of the permittivity switches sign at 1240 nm and defines the ENZ region with (shaded area in Figure 1b). To fabricate ITO thin films with different ENZ wavelengths, we use RF sputtering deposition on a glass substrate, followed by an annealing process (see Supplemental Material for fabrication details) [38]. The measured and fitted transmittance spectra of three samples at 60 degree excitation angle are shown in Figure 1c. All samples clearly show different ENZ resonance peaks in the NIR spectral region.

Figure 1. (a) Transmittance of the ITO film measured at different incident angles. The dashed curves show the fitted transmittance spectra obtained using the TMM and the Drude model. (b) Calculated permittivity of the commercial ITO film using the fitted Drude parameters. (c) Experimental (black line) and calculated (red line) 60° transmittance spectra of sputtered ITO films with different ENZ wavelengths.
Fig. 2 shows the schematic of transient optical processes. When the pump photon energy is smaller than the bandgap, the electrons in the conduction band undergo an intraband transition through free carrier absorption, as shown in Figure 2a. Before the pulse arrives, the electrons are in equilibrium and can be described as a room temperature Fermi distribution. Once the pump light is incident on the sample, the photon is absorbed and the electrons are excited to higher energy states to form a hot electron distribution. Due to the non-parabolicity of the conduction band, the effective mass of the electron sea is increased. This decreases the plasma frequency
Figure 2. Schematic of the nonlinear optical responses in ITO thin films. (a) The intraband transition of conduction band electrons induces a larger effective mass due to the non-parabolic band structure and decreases the plasma frequency. : conduction band, : Fermi level, : valence band, : hot electron energy level, dashed curves represent the parabolic band structure and the increase of the Fermi level. (b) The interband transition generates additional free carriers, increases the plasma frequency and induces a larger effective mass. The resulting nonlinearity depends on the competition between the two mechanisms and can be inverted by controlling the parabolicity and the Fermi level.
, where is the free electron density and is the effective mass of the conduction band, and red shifts the ENZ resonance. Since the band gap of ITO films is typically 3.5 eV-4.3 eV [39], this red shift happens when the pump pulse energy is in the NIR region. On the other hand, as shown in Figure 2b, when the photon energy is greater than the bandgap, an interband transition occurs, where electrons in the valence band are promoted into the conduction band and the free carrier concentration is increased. Consequently, as revealed by Eq. (2), increases and the ENZ resonance blue shifts accordingly. This happens for a UV pump where the photon energy is close to or above the band gap. However, with an increase of the free carrier density in the conduction band, the Fermi level is raised and the effective mass also increases due to the non-parabolicity. Thus, when the non-parabolicity of the material is large enough, then the effective mass increase dominates the free carrier density increase, and interband transition can cause an overall red shift of ENZ, inverting the nonlinearity. The total change and the shift direction of the plasma frequency and the nonlinearity will depend on the competing contributions of the the free carrier density in the equilibrium state (Fermi level) and the non-parabolicity of the conduction band structure.
To evaluate the influence of both factors on the nonlinearity of ITO films, an analytical model is developed to describe the intraband and interband transitions. First, to account for non-parabolicity the band structure is written as [40, 41]:
, where denotes the non-parabolicity. The plasma frequency is derived from the collisionless Boltzmann equation [28]. For the intraband transition, the free carrier density is a constant and the electron energy density is equal to the room-temperature energy density plus the absorbed pump photon energy density , where is the chemical potential and is the electron temperature (the detailed expressions for , and can be found in Ref. 28).
Therefore, once the band structure parameters , and the Drude parameters , are known, the nonlinearity caused by the intraband transition is fully determined. In Figure 3a and 3b, we theoretically explored the differential transmittance change near the ENZ region under the NIR pump, where intraband transition dominates the nonlinearity. is defined as:

Figure 3. (a) Differential transmittance change with a broadband probe in NIR region calculated using the intraband transition model, where is 2.39 eV. Different colors represent different ENZ wavelengths. (b) Calculated for different values of . The ENZ wavelength is 1220 nm. (c) Calculated spectra for various using the interband transition model. The ENZ wavelength is 1220 nm and the pump wavelength is 360 nm.
, where denotes the reference transmittance and is the dynamic change in transmittance after the pump. In Figure 3a, the ENZ wavelength is varied from 1220 nm to 1500 nm while the non-parabolicity and the effective mass are kept at 2.39 eV and , respectively, where is the electron mass at rest. At longer ENZ wavelengths that correspond to the lower free carrier density and the lower Fermi level, the maximum absolute value of is larger. This is because electrons at a lower Fermi level undergo a larger change in effective mass when the same amount of energy is absorbed which results in a larger nonlinearity. On the other hand, as shown in Figure 3b, is smaller with changing from 2 eV to 2.8 eV whereas the ENZ wavelength remains unchanged. Smaller represents larger non-parabolicity as shown in Eq. (3), thus creating a larger change in the effective mass and a larger nonlinearity.
After individually studying the influence of the free carrier density and the non-parabolicity on the nonlinearity, we describe a cumulative phenomenon which involves both intraband and interband transitions under a UV pump. Under this condition, the free carrier density is equal to the room-temperature carrier concentration plus the density of absorbed photons :
, where represents the Fermi-Dirac distribution. is given by:
, where is the energy per pulse, is the absorption, is the incident angle, is the pump beam radius, is the thickness of the film and is the photon energy. The calculated spectra under the UV pump is plotted in Figure 3c, where the ENZ wavelength is 1220 nm and is varied from 2 eV to 2.8 eV. Interestingly, unlike in Figure 3a and 3b where the NIR pump gives the same spectral shape of , the spectral shape under the UV excitation in Figure 3c depends on the relative strength between the free carrier density and the non-parabolicity. If is relatively small (Figure 3c, black curve) the hot electron-induced Fermi level shift has a stronger contribution than the increase in carrier density due to band-to-band transition and causes a red shift of the plasma frequency .
Conversely, an overall blue shift of occurs when the hot electron contribution is relatively lower (Figure 3c, red and green curves). To the best of our knowledge, this is the first observation of spectral inversion of nonlinearity based on the competing mechanisms of the free carrier density changes and the non-parabolicity.
Next, we turn our attention to optical pump-probe measurements to elucidate the impact of the Fermi level and the non-parabolicity on ITO nonlinearities. In a set of transient ultrafast measurements we use a narrowband fs pump laser pulse to induce excitations in ITO films and a broadband fs probe pulse at various delay times to measure the time-resolved transmittance spectra (see Supplemental Material for details of the experimental setup). Figure 4a shows the spectral map measured on a ITO film with a ENZ resonance at 1220 nm. A pump wavelength that coincides with the ENZ wavelength optimizes the absorption and enhances the nonlinear response. An ultrafast red-shift of the ENZ resonance is observed, indicating the increase in the electron effective mass induced by intraband transitions. A maximum of nonlinear response of is obtained at a pump fluence of , as shown in Fig. S1, corresponding to , which is comparable to values in the literature [8, 20, 28]. Additional spectral maps measured on ITO films with different ENZ wavelengths and pumped at their resonance peaks are plotted in Figure 4b and Figure 4c. In Figure 4d, the spectrum at 0.19 ps from Figure 4a corresponding to the time delay immediately after the pump pulse absorption is fitted using the TMM to get the plasma frequency . Using the fitted and unpumped , the effective mass and the non-parabolicity can be determined from the intraband transition model. The theoretical spectrum (Figure 4d, red curve) is in good agreement with the experimental data. The same calculation is conducted on other samples with ENZ wavelengths at 1400 nm and 1500 nm, as shown in Figure 4e and Fig. S2. All the theoretical data match well with the measurements, confirming the validity of our model. The values for all Drude and band structure parameters are listed in Table S2.

Figure 4. (a)-(c) Time-resolved transmittance spectral change of ITO films. The pump wavelength coincides at the ENZ wavelength at (a) 1220 nm (b) 1400 nm and (c) 1500 nm. (d), (e) spectra at the beginning of the relaxation process for ENZ wavelengths at (d) 1220 nm and (e) 1400 nm. The black curves are extracted from the experimental data with the delay time at (d) 0.19 ps and (e) 0.13 ps. The red curves fit the plasma frequency after pump. (f) kinetic decay process of the absorbed energy . The pump wavelengths are in the NIR region. The squares show experimental data and solid lines are exponential fits.
After absorbing the pump photon energy and creating a hot electron distribution, the carriers cool down through the electron-phonon coupling and return to the equilibrium state on a sub-ps time scale [6, 42]. The dissipation of the excitation energy density as a function of time, is plotted in Figure 4f and represents the dynamics of the relaxation process. The dashed lines are exponential fits to extract the relaxation times. These values are typically fs and agree well with ultrafast intraband transition dynamics. The increasing discrepancy between the fitted data and measurements at shorter delay times can be attributed to the electron temperature-dependent heat capacity of electron gas [6].
Next, a UV pulse centered at 360 nm is used as the pump source to introduce interband transitions in ITO films. The time-resolved transmittance maps measured on ITO films with various ENZ wavelengths are shown in Figure 5a-Figure 5c. The photon energy at 360 nm corresponds to the band gap of these ITO films as shown in Fig. S4, which shows the pump-wavelength dependent maximum of . The Burstein-Moss bandgap shift [43, 44] has been shown to be negligible, thus it is a reasonable assumption that the same amount of electrons in the valence band are excited to the conduction band in all samples. However, different nonlinear behavior is clearly observed as a result of the competing mechanisms of interband and intraband absorption. The ITO film with ENZ wavelength at 1220 nm has the largest non-parabolicity (see Table S2), therefore the contribution of intraband transition to the plasma frequency is larger than the contribution of interband transition. Finally, as shown in Figure 5a, the plasma frequency is red-shifted which is similar to the behavior under the NIR pump. Conversely, films with longer ENZ wavelengths have smaller non-parabolicity, which is not able to balance the shift induced by the free carrier density increase induced by interband transitions. Therefore, the plasma frequency is blue-shifted as shown in Figure 5b and Figure 5c. These results agree well with the theoretical calculations shown in Figure 3c. Moreover, in Figure 5d, Figure 5e and Fig. S3, the experimental spectra corresponding to the peak of are plotted along with the calculation for . The same parameters in Table S2 are used to fit the spectra with the interband transition model (Figure 5d, Figure 5e and Fig. S3, red curves). The calculation results are verified by the measurements, indicating the validity of our theoretical predictions.

Figure 5. (a)-(c) Time-resolved transmittance spectral change of ITO films in pump-probe measurements. The pump wavelength is at 360 nm. The ENZ wavelength is at (a) 1220 nm, (b) 1400 nm and, (c) 1500 nm. (d),(e) spectra at the beginning of the relaxation process for ENZ wavelengths at (d) 1220 nm and (e) 1400 nm. The black curves are extracted from the experimental data with the delay time at (d) 0.21 ps and (e) 0.16 ps. The red curves fit the plasma frequency after pump. (f) kinetic decay process of the absorbed energy . The pump wavelength is 360 nm. The squares show experimental data and solid lines are exponential fits.
Finally, the dynamics of the relaxation process is investigated. This process involves thermal dissipation, where the electron temperature decreases through electron-phonon interactions and recombination, including the radiative and the trap-assisted recombination channels [45]. Generally the recombination is slower than the thermal dissipation process. As shown in Figure 5f (black curve), the decay of in the ITO film with the ENZ wavelength at 1220 nm shows a characteristic recovery time of 142 fs. This agrees with the typical thermal dissipation time revealed in Figure 4f, indicating the dominance of the intraband transition.
intraband transition. On the other hand, red and green curves in Figure 5f include a slower decay process with around 500 fs in addition to the faster decay attributed to thermal dissipation. This longer relaxation rate may correspond to the recombination, which again indicates that interband transitions plays a dominant role in ITO films with the ENZ at 1400 nm and 1500 nm.
In conclusion, we have explained the role of various mechanisms responsible for ultrafast nonlinear properties of ITO thin films near their ENZ wavelengths using a comprehensive study that includes analytical models verified by experimental measurements. We have explored the interplay between the intraband transition, which increases the electron effective mass due to the non-parabolic band structure, and the interband transition, which generates larger free carrier concentrations. The combination of the two processes under the above-bandgap pump results in different nonlinear behaviors depending on the relative contributions between the non-parabolicity and the Fermi level shift. An interband transition model is used to describe these competing mechanisms and predict the cumulative shift direction of the plasma frequency. Transient transmittance measurements agree well with the theoretical predictions demonstrating the spectrally invertible nonlinearity. Moreover, the Drude parameters and band structure parameters extracted from the fits show clear trends that are related to the material properties of ITO films. Our findings may guide the design and fabrication of TCO photonic platforms based on the tunability of nonlinear optical interactions.
Acknowledgments
This work was supported by UDRI with the Air Force contract no. FA8651-20-D-0003. MSA, SUD, and JWA are thankful for the funding support through AFOSR Lab Tasks 22RWCOR002. HH acknowledges support from the Department of Energy (DE-SC0020101).
References
- [1]N. Kinsey, C. DeVault, A. Boltasseva, and V. M. Shalaev, Near-zero-index materials for photonics, Nature Reviews Materials 4, 742 (2019).DOI
- [2]I. Liberal and N. Engheta, Near-zero refractive index photonics, Nature Photonics 11, 149 (2017).DOI
- [3]Y. Li, S. Kita, P. Muñoz, O. Reshef, D. I. Vulilis, M. Yin, M. Lončar, and E. Mazur, On-chip zero-index metamaterials, Nature Photonics 9, 738 (2015).DOI
- [4]E. J. R. Vesseur, T. Coenen, H. Caglayan, N. Engheta, and A. Polman, Experimental verification of n = 0 structures for visible light, Physical review letters 110, 013902 (2013).pubmed.ncbi.nlm.nih.gov/23383791
- [5]O. Reshef, P. Camayd-Muñoz, D. I. Vulis, Y. Li, M. Loncar, and E. Mazur, Direct observation of phase-free propagation in a silicon waveguide, ACS Photonics 4, 2385 (2017).DOI
- [6]M. Z. Alam, I. D. Leon, and R. W. Boyd, Large optical nonlinearity of indium tin oxide in its epsilon-near-zero region, Science 352, 795 (2016).
- [7]M. H. Javan and M. I. Stockman, Real and imaginary properties of epsilon-near-zero materials, Phys Rev Lett 117, 107404 (2016).
- [8]M. Clerici, N. Kinsey, C. DeVault, J. Kim, E. G. Carnemolla, L. Caspani, A. Shaltout, D. Faccio, V. Shalaev, A. Boltasseva, and M. Ferrera, Controlling hybrid nonlinearities in transparent conducting oxides via two-colour excitation, Nat Commun 8, 15829 (2017).
- [9]J. Kim, A. Dutta, G. V. Naik, A. J. Giles, F. J. Bezares, C. T. Ellis, J. G. Tischler, A. M. Mahmoud, H. Caglayan, O. J. Glembocki, A. V. Kildishev, J. D. Caldwell, A. Boltasseva, and N. Engheta, Role of epsilon-near-zero substrates in the optical response of plasmonic antennas, Optica 3 (2016).
- [10]Y. C. Jun, J. Reno, T. Ribaudo, E. Shaner, J. J. Greffet, S. Vassant, F. Marquier, M. Sinclair, and I. Brener, Epsilon-near-zero strong coupling in metamaterial-semiconductor hybrid structures, Nano Lett 13, 5391 (2013).
- [11]O. Reshef, I. De Leon, M. Z. Alam, and R. W. Boyd, Nonlinear optical effects in epsilon-near-zero media, Nature Reviews Materials 4, 535 (2019).
- [12]N. Kinsey, C. DeVault, J. Kim, M. Ferrera, V. M. Shalaev, and A. Boltasseva, Epsilon-near-zero al-doped zno for ultrafast switching at telecom wavelengths, Optica 2 (2015).
- [13]T. S. Luk, D. De Ceglia, S. Liu, G. A. Keeler, R. P. Prasankumar, M. A. Vincenti, M. Scolara, M. B. Sinclair, and S. Campione, Enhanced third harmonic generation from the epsilon-near-zero modes of ultrathin films, Applied Physics Letters 106, 151103 (2015).
- [14]A. Capretti, Y. Wang, N. Engheta, and L. Dal Negro, Enhanced third-harmonic generation in si-compatible epsilon-near-zero indium tin oxide nanolayers, Optics letters 40, 1500 (2015).
- [15]L. Caspani, R. P. Kaipurath, M. Clerici, M. Ferrera, T. Roger, J. Kim, N. Kinsey, M. Pietrzyk, A. Di Falco, V. M. Shalaev, A. Boltasseva, and D. Faccio, Enhanced nonlinear refractive index in epsilon-near-zero materials, Phys Rev Lett 116, 233901 (2016).
- [16]S. Vezzoli, V. Bruno, C. DeVault, T. Roger, V. M. Shalaev, A. Boltasseva, M. Ferrera, M. Clerici, A. Dubietis, and D. Faccio, Optical time reversal from time-dependent epsilon-near-zero media, Phys Rev Lett 120, 043902 (2018).
- [17]M. S. Allen, J. W. Allen, B. R. Wenner, D. C. Look, and K. D. Medley, Application of highly conductive zno to the excitation of long-range plasmons in symmetric hybrid waveguides, Optical Engineering 52, 064603 (2013).
- [18]S. Saha, B. T. Diroll, J. Shank, Z. Kudyshev, A. Dutta, S. N. Chowdhury, T. S. Luk, S. Campione, R. D. Schaller, V. M. Shalaev, A. Boltasseva, and M. G. Wood, Broad-band, high-speed, and large-amplitude dynamic optical switching with yttrium-doped cadmium oxide, Advanced Functional Materials 30 (2019).
- [19]Y. Yang, K. Kelley, E. Sachet, S. Campione, T. S. Luk, J.-P. Maria, M. B. Sinclair, and I. Brener, Femtosecond optical polarization switching using a cadmium oxide-based perfect absorber, Nature Photonics 11, 390 (2017).
- [20]M. Z. Alam, S. A. Schulz, J. Upham, I. De Leon, and R. W. Boyd, Large optical nonlinearity of nanoantennas coupled to an epsilon-near-zero material, Nature Photonics 12, 79 (2018).
- [21]V. Bruno, C. DeVault, S. Vezzoli, Z. Kudyshev, T. Huq, S. Mignuzzi, A. Jacassi, S. Saha, Y. D. Shah, S. A. Maier, D. R. S. Cumming, A. Boltasseva, M. Ferrera, M. Clerici, D. Faccio, R. Sapienza, and V. M. Shalaev, Negative refraction in time-varying strongly coupled plasmonic-antenna epsilon-near-zero systems, Phys Rev Lett 124, 043902 (2020).
- [22]V. E. Babicheva, N. Kinsey, G. V. Naik, M. Ferrera, A. V. Lavrinenko, V. M. Shalaev, and A. Boltasseva, Towards cmos-compatible nanophotonics: Ultra-compact modula- tors using alternative plasmonic materials, Optics express 21, 27326 (2013).
- [23]V. E. Babicheva, A. Boltasseva, and A. V. Lavrinenko, Transparent conducting oxides for electro-optical plasmonic modulators, Nanophotonics 4, 165 (2015).DOI
- [24]I. Liberal and N. Engheta, The rise of near-zero-index technologies, Science 358, 1540 (2017).DOI
- [25]P. Johnson and R. Christy, Optical constants of transition metals: Ti, v, cr, mn, fe, co, ni, and pd, Physical review B 9, 5056 (1974).
- [26]T. Tyborski, S. Kalusniak, S. Sadofev, F. Henneberger, M. Woerner, and T. Elsaesser, Ultrafast nonlinear response of bulk plasmons in highly doped zno layers, Phys Rev Lett 115, 147401 (2015).DOI
- [27]P. Guo, R. D. Schaller, L. E. Ocola, B. T. Diroll, J. B. Ketterson, and R. P. Chang, Large optical nonlinearity of ito nanorods for sub-picosecond all-optical modulation of the full-visible spectrum, Nat Commun 7, 12892 (2016).DOI
- [28]P. Guo, R. D. Schaller, J. B. Ketterson, and R. P. H. Chang, Ultrafast switching of tunable infrared plasmons in indium tin oxide nanorod arrays with large absolute amplitude, Nature Photonics 10, 267 (2016).DOI
- [29]J. R. Hendrickson, S. Vangala, C. Dass, R. Gibson, J. Goldsmith, K. Leedy, D. E. Walker, J. W. Cleary, W. Kim, and J. Guo, Coupling of epsilon-near-zero mode to gap plasmon mode for flat-top wideband perfect light absorption, ACS Photonics 5, 776 (2018).DOI
- [30]C. K. Dass, H. Kwon, S. Vangala, E. M. Smith, J. W. Cleary, J. Guo, A. Alù, and J. R. Hendrickson, Gap-plasmon-enhanced second-harmonic generation in epsilon-near-zero nanolayers, ACS Photonics 7, 174 (2019).DOI
- [31]S. Campione, J. R. Wendt, G. A. Keeler, and T. S. Luk, Near-infrared strong coupling between metamaterials and epsilon-near-zero modes in degenerately doped semiconductor nanolayers, ACS Photonics 3, 293 (2016).DOI
- [32]B. C. Yildiz and H. Caglayan, Epsilon-near-zero media coupled with localized surface plasmon modes, Physical Review B 102, 165303 (2020).DOI
- [33]Y. Zhou, M. Z. Alam, M. Karimi, J. Upham, O. Reshef, C. Liu, A. E. Willner, and R. W. Boyd, Broadband frequency translation through time refraction in an epsilon-near-zero material, Nat Commun 11, 2180 (2020).DOI
- [34]E. Feigenbaum, K. Diest, and H. A. Atwater, Unity-order index change in transparent conducting oxides at visible frequencies, Nano Lett 10, 2111 (2010).DOI
- [35]J. Bohn, T. S. Luk, C. Tollerton, S. W. Hutchings, I. Brener, S. Horsley, W. L. Barnes, and E. Hendry, All-optical switching of an epsilon-near-zero plasmon resonance in indium tin oxide, Nat Commun 12, 1017 (2021).DOI
- [36]R. Secondo, J. Khurgin, and N. Kinsey, Absorptive loss and band non-parabolicity as a physical origin of large nonlinearity in epsilon-near-zero materials, Optical Materials Express 10 (2020).arxiv.org/abs/2004.00134
- [37]X. Liu, J. Park, J.-H. Kang, H. Yuan, Y. Cui, H. Y. Hwang, and M. L. Brongersma, Quantification and impact of nonparabolicity of the conduction band of indium tin oxide on its plasmonic properties, Applied Physics Letters 105 (2014).DOI
- [38]Y. Wang, A. Capretti, and L. Dal Negro, Wide tuning of the optical and structural properties of alternative plasmonic materials, Optical Materials Express 5 (2015).DOI
- [39]Z. Yu, I. R. Perera, T. Daeneke, S. Makuta, Y. Tachibana, J. J. Jasieniak, A. Mishra, P. Bäuerle, L. Spiccia, and U. Bach, Indium tin oxide as a semiconductor material in efficient p-type dye-sensitized solar cells, NPG Asia Materials 8, e305 (2016).DOI
- [40]E. O. Kane, Band structure of indium antimonide, Journal of Physics and Chemistry of Solids 1, 249 (1957).DOI
- [41]M. H. Cohen, Energy bands in the bismuth structure: i. a nonellipsoidal model for electrons in bi, Physical Review 121, 387 (1961).
- [42]N. Del Fatti, C. Voisin, M. Achermann, S. Tzortzakis, D. Christofilos, and F. Vallée, Nonequilibrium electron dynamics in noble metals, Physical Review B 61, 16956 (2000).DOI
- [43]E. Burstein, Anomalous optical absorption limit in insb, Physical Review 93, 632 (1954).DOI
- [44]L.-j. Meng and M. Dos Santos, Properties of indium tin oxide films prepared by rf reactive magnetron sputtering at different substrate temperature, Thin solid films 322, 56 (1998).DOI
- [45]S. M. Sze, Y. Li, and K. K. Ng, Physics of semiconductor devices (John wiley & sons, 2021).