betaFeedback

WorksPhysics and Astronomy

Horizontal component of the ion drag force in a plasma sheath

Abstract

The ion drag force is responsible for the underlying physics behind many important phenomena in complex (dusty) plasma, such as void formation, particle alignment in an ion flow, shadow-like attraction between the particles, dust clouds rotation in the presence of a magnetic field etc. In this paper, we investigate the ion drag force acting on particles levitating near the sheath edge of a capacitively coupled discharge in xenon. In particular, we calculate the radial (horizontal) component of the ion drag force directed parallel to the lower electrode above which the particles levitate. The calculation is based on the actual information about the ion flow, which is directly obtained using Laser Induced Fluorescence. The calculated horizontal component is comparable in magnitude to the vertical one, which pushes the particles toward the electrode surface, and is higher than previously expected. This unexpected finding must be taken into account in future research. The very possibility of the measurements we report opens the door for detailed studies of dusty plasma phenomena governed by ions and their flows.

Introduction

The presence of charged macroparticles or “dust”, of nanometer to micrometer size, in a plasma environment is an ubiquitous occurrence in nature with examples including planetary rings, comet tails, interplanetary media, and interstellar clouds [1]. Dusty plasmas are also important for numerous technological applications. For example, semiconductors are the backbone of modern technology, with plasma-based processes involved in nearly half of all semiconductor fabrication steps. In these processes, naturally formed dust particles are considered unwanted, and their control mechanisms are important to improve yield and device performance. Dusty plasmas in space are crucial for understanding satellite dust interactions [2], space based communication [3], and space based manufacturing [4]. In dusty plasma systems, the characteristic length and time scales are significantly extended – for example, to hundreds of microns and tens of milliseconds. This makes dusty plasmas an excellent medium for studying a wide range of generic processes operating in classical fluids and solids in exceptional detail, down to the most fundamental, “atomistic” (kinetic) level [5, 6, 7, 8]. In recent years, this field has developed substantial interdisciplinary connections in areas such as statistical physics [9, 10], soft condensed matter [11, 12], physics of fluids [13, 14], and materials science.

Dust particles once introduced into the plasma acquire an electrical charge by collecting electrons and ions, interact with the plasma species, and self-consistently modify the surrounding plasma medium, making it more complex. Simultaneously, plasma species govern the behavior of dust particles and support a wide range of physical phenomena including self-organization [15, 16, 17], phase transitions in 2d and 3d complex plasma [5, 6, 7], waves [8, 18, 19, 20], instabilities [21, 22, 23], void formation [24, 25, 26], sheared rotation, and much more. Ions are fundamental to all these phenomena. Therefore, accurate information of ion properties such as ion flow velocity and temperature will help develop the theoretical understanding of dust plasma interaction more accurately.

The ion drag force is invoked for numerous dusty plasma phenomena, as explained above. It is also the least trivial force among the forces acting on charged particles in dusty plasmas and can vary greatly depending on plasma parameters and especially those of the ion component. Not surprisingly, it has been investigated extensively both theoretically and computationally. Most of the previous experimental investigations measured the ion drag force using indirect techniques. Some examples include measurements of the ion drag force from the particle mass and the angle of deflection as dust fell in the plasma medium [27, 28, 29, 30, 31], or from the velocities of dust particles moving in a weak electric field of the positive column of a direct-current discharge [32, 33]. Very recently measurements of the ion drag force in the presheath region of single and dual-frequency capacitively coupled radio frequency discharge using optically trapped microparticles have been reported by Niemann et al. [34]. In this work the authors have calculated the localized ion drag force component by scanning the particle vertically through the pre-sheath region. The horizontal motion was not measured. In general, experimental measurements of the ion drag force in the presheath and sheath areas of a radio frequency discharge remain scarce.

From the theoretical side, previous works on the ion drag force mainly utilized two approaches: the “binary collision approach” and the “kinetic approach”. The former was discussed by Uglov and Gnedovets [35]; subsequent work was carried out by Barnes et al. [36] and Khrapak et al. [37, 38, 39, 40] taking into account specific properties of dusty plasma. In particular, the binary collision approach can account for strong nonlinearities in the ion-particle interaction, but it is unable to account for ion-neutral collisions and anisotropy in the ion-particle interaction induced by ion flows. For this reason, a self-consistent kinetic formalism was also developed [41, 42, 43]. The kinetic approach is able to account for ion-neutral collisions and flow-induced anisotropies, but cannot account for strong nonlinearities is the ion-particle interaction since linear response technique is involved. Using this kinetic approach, the ion drag force was calculated for an arbitrary velocity of the ion flow [44]. A hybrid approach was developed simultaneously accounting for strong ion-particle coupling and anisotropy in the ion-particle interaction in a plasma with flowing collisionless ions [45]. There is still no solid theoretical model for the regime in which ions are collisional and interact strongly with the particle (we do not consider this regime here). However, numerical simulations exist [46, 47] and fitting formulas have been proposed.

In this paper, we utilize direct measurements of the intrinsic properties of the ion component, such as the drift velocity and temperature, to calculate the ion drag force acting on particles levitating near the sheath edge of a capacitively coupled discharge in xenon. Our ion velocity distribution function (IVDF) measurements via Laser Induced Fluorescence (LIF) provide the direct measurements of ion parameters that we use to calculate the component of the ion drag force acting in the radial direction (parallel to the lower electrode). Previously, most attention was directed to the vertical component, which pushes the particles to the electrode [36], since it can affect the levitation height of the particles above the electrode. Our present results can help better understand the problems related to the formation and evolution of 2d dust voids in a radio-frequency plasma sheath [48] and, more generally, about the balance of different forces under sheath-related conditions.

Experimental Apparatus & Methods

A schematic of the experimental arrangement consisting of a dusty plasma source and the LIF system is shown in Figure 1. A brief overview is given here as the detailed description of the LIF technique and plasma system is given elsewhere [49]. The experiment is performed in a radio frequency (rf) capacitively coupled discharge (CCP) in a proprietary vacuum chamber and electrode system. An

Figure 1. Schematic of the experimental arrangement. Levitated dust particles in xenon plasma over the rf powered electrode at 13.56 MHz are illuminated by a 650 nm laser. A ns-pulsed laser tuned at 605 nm was used for LIF measurements.

rf source at 13.56 MHz is coupled through a matching network to an electrode in the plasma chamber. The bottom electrode is powered by rf while the top electrode is grounded. The top electrode is made of conductive but transparent Indium Tin Oxide (ITO) which allows collection of light emission for LIF. Gas injection and vacuum pumping via a turbomolecular pump are arranged below the bottom electrode to create a stable and reproducible plasma. A Langmuir probe and dust shaker are attached via ports on one side of the chamber. The other sides of the chamber offer optical access for laser injection for LIF and laser illumination of the dust particles. A circular copper ring is used to trap the dust particles within a localized area. The dust particles are mono-disperse melamine-formaldehyde spheres of diameter 7.14±\pm0.06 μ\mum.

A xenon plasma was created for a range of pressures and rf powers suitable for understanding dusty plasma phenomena. A photograph of the levitated dust particle cloud, illuminated with a continuous-wave laser at 650 nm is shown in Figure 2(a) with a monochrome top-view of the individual dust particles in Figure 2(b). Since LIF works well at low pressures, we investigated the lowest pressure where a stable dust cloud forms and worked into a higher pressure regime where dusty plasma phenomena are of interest.

Photograph and top view of the dust cloud

Figure 2. (a) Photograph of the dust cloud in the xenon plasma discharge for 10 W rf power and 8.25 mTorr pressure. (b) Top view of the dust cloud at these parameters.

The LIF laser was injected and focused in the plane parallel to the electrode surface and is shown in the schematic of Figure 1. The LIF measurement location is 2 cm from the center axis, near the edge of the dust cloud. All of our measurements are indicative of ions in this horizontal direction, also denoted by v⊥v_\perp, whereas the vertical direction of ions entering the plasma sheath is represented by v∥v_\parallel. For the work presented here, a ns-pulsed tunable dye laser is tuned to 605.283 nm to pump the Xe II 5d 4D7/25d\ ^4D_{7/2} metastable state to the 6p 4P5/26p\ ^4P_{5/2} state, which then decays to the 6s 4P5/26s\ ^4P_{5/2} state by emitting 529.369 nm photons. A set of collection optics guides the overlapped excitation laser spot (∼1\sim1 mm) through a narrow bandpass filter centered on 529 nm placed before a photomultiplier tube (PMT) which is then connected to a 350 MHz bandwidth oscilloscope. A WS7-60 HighFinesse wavemeter, 60 MHz (0.08 pm) with ±36\pm36 m/s velocity error at 605 nm, monitors the laser wavelength. Data from the oscilloscope (i.e. PMT), wavemeter, and laser power meter, for measuring individual shot laser energy, are recorded by a custom data acquisition system.

The LIF spectral profile is subject to multiple line broadening mechanisms which must be taken into account to correctly measure the ion temperature. The ion flow is determined from the Doppler shift and is thus not altered by these mechanisms. Our deconvolution process is described in detail elsewhere [49] and we generally follow the procedure established by Smith et al. [50] to account for natural, hyperfine, Doppler, and laser linewidth contributions.

Results and Discussion

The ion velocity distribution function without dust at 8.25 mTorr and 10 W rf power is shown in Figure 3 The red data points are the measured IVDF, the solid blue line is the best fit for the simulated IVDF consisting of broadening mechanisms, and the dashed black line is the true IVDF from which the ion flow and ion temperature are extracted. For presentation purposes, the IVDF is normalized to the maximum signal. For a pressure of 8.25 mTorr and 10 W rf power, the real distribution of the ions yields clear values for Ti≃580T_i \simeq580 K and vi≃1700v_i \simeq1700 m/s. A Langmuir probe, in the absence of dust, measured the electron temperature and the electron density as Te≃3.1T_e \simeq3.1 eV and ne≃1.7×1016n_e \simeq1.7 \times10^{16} m−3^{-3}, respectively. The ion flow speed is slightly higher than the ion sound speed given by vs=Te/mi≃1540v_s = \sqrt{T_e/m_i} \simeq1540 m/s and much higher than the ion thermal speed given by vTi=Ti/mi=190v_{Ti} = \sqrt{T_i/m_i} = 190 m/s (here kBk_B is set to unity to simplify the notation).

Ion velocity distribution function

Figure 3. Ion velocity distribution function at the sheath interface for 10 W rf power and p=8.25p = 8.25 mTorr without dust present in the plasma discharge. The ion flow velocity is 1700 m/s and the ion temperature is 580 K.

The IVDF was also measured for the same plasma parameter as shown in Figure 3 while dust was present. The addition of dust in the plasma reduces the ion flow velocity by ∼100\sim100 m/s, while the ion temperature remains the same within the error bar range.

The Ion Drag Force

The parameter regime realized in this experiment provides a direct opportunity to calculate the ion drag force with input from our IVDFs. The situation is close to that considered by Barnes et al. [36], except we look at the ion drag force acting in the horizontal direction, that is parallel to the electrode.

For the low pressures investigated, the effect of ion-neutral collisions on either particle charging or ion drag force can be safely neglected. The fact that the ion drift velocity is comparable to the ion sound velocity has three important consequences. First, the ion-particle coupling is relatively weak. Second, the screening of the particle charge is mostly associated with electrons, since highly energetic ions barely contribute to the screening, see e.g. Ref. [45] for a quantitative consideration. Third, since the drift velocity is much higher than the ion thermal velocity, the exact shape of the IVDF is not very important. The ion drift velocity can be decomposed into horizontal, v⊥v_\perp which is the velocity component in the radial direction (shown as X-direction in Figure 1), and vertical v∥v_\parallel components, which is the velocity component along the interelectrode gap and the discharge axis (shown as Y-direction in Figure 1). The horizontal component is measured to be near-sonic v⊥∼vsv_\perp\sim v_s. The vertical component should be comparable; the particles need to be levitated against gravity and therefore a significant electric field is required to ensure levitation. Such a strong electric field can only be produced near the sheath edge and, according to the Bohm criterion, v∥∼vsv_\parallel\sim v_s. Higher velocity can be realized deep in the sheath, but here the electron density vanishes exponentially, and sufficient negative charges on the particles cannot be sustained. The total drift velocity is therefore vtot=v∥2+v⊥2∼2vsv_{\mathrm{tot}}=\sqrt{v_{\parallel}^{2}+v_{\perp}^{2}}\sim\sqrt{2}v_s. To calculate the particle charge, we can apply the orbital-motion limited theory (OML) [51, 52]. We need to equate the electron and ion fluxes directed to the particle surface. The electron flux is

Je=8πa2nevTee−z,(1)J_e=\sqrt{8\pi}a^2n_e v_{Te}e^{-z}, \tag*{(1)}

where aa is the radius of the particles, nen_e is the electron density, vTe=Te/mev_{Te}=\sqrt{T_e/m_e} is the thermal velocity of the electrons, and z=Ze2/aTez=Ze^2/aT_e is the reduced particle charge, ZZ being the charge number and ee the elementary (electron) charge. The ion flux is

Ji≃2πa2nivs(1+z),(2)J_i\simeq\sqrt{2}\pi a^2n_i v_s(1+z), \tag*{(2)}

where nin_i is the density of the ions and we take into account vtot∼2vsv_{\mathrm{tot}}\sim\sqrt{2}v_s. Equating the two fluxes, we get z≃4.6z\simeq4.6. For our experiment, the radius of the particles is 3.57 μm3.57\ \mu\mathrm{m}. The electron temperature of 3.1 eV3.1\ \mathrm{eV} was measured with a Langmuir probe situated in the same plane as the LIF measurement and where the dust would levitate. This corresponds to the particle charge number Z=z(aTe/e2)≃3×104Z=z(aT_e/e^2)\simeq3\times10^4 elementary charges. With the estimated particle density np≃1.5×105 cm−3n_p\simeq1.5\times10^5\ \mathrm{cm}^{-3} we obtain the charge density of the particle component npZ∼4.5×109n_pZ\sim4.5\times10^9. The electron density, also measured by the Langmuir probe, is 1.7×1010 cm−31.7\times10^{10}\ \mathrm{cm}^{-3}. This implies that charge quasi-neutrality in the form ni≃nen_i\simeq n_e holds and the charge cannibalism effect [53] is unimportant.

To calculate the absolute magnitude of the ion drag force, we multiply the Coulomb scattering cross section [37, 54]

σC=4π(Ze2mivtot2)2ln⁡Λ(3)\sigma_C=4\pi\left(\frac{Ze^2}{m_i v_{\mathrm{tot}}^2}\right)^2\ln\Lambda \tag*{(3)}

with the ion momentum flow minivtot2m_i n_i v_{\mathrm{tot}}^2. Here, ln⁡Λ\ln\Lambda is the Coulomb logarithm. Generally, the Coulomb logarithm for ion-particle collisions in dusty plasma is a delicate topic and the standard approach either requires a modification or is not applicable at all due to strong ion-grain coupling [37, 38, 39, 40]. In this case, no such problem arises because the ions are highly energetic. To a good accuracy ln⁡Λ≃ln⁡(λe/a)∼3\ln\Lambda\simeq\ln(\lambda_e/a)\sim3, where λe\lambda_e is the electron Debye radius (screening is mostly associated with electrons in this case). We rewrite the ion drag force in the form

Fi≃2πz2a2neTeln⁡Λ,(4)F_i\simeq2\pi z^2a^2n_eT_e\ln\Lambda, \tag*{(4)}

where all the parameters are known. The force is composed of vertical F∥=Fi(v∥/vtot)F_{\parallel}=F_i(v_{\parallel}/v_{\mathrm{tot}}) and horizontal components F⊥=Fi(v⊥/vtot)F_{\perp}=F_i(v_{\perp}/v_{\mathrm{tot}}). In our case, these are comparable, F∥∼F⊥∼3×10−6 dyneF_{\parallel}\sim F_{\perp}\sim3\times10^{-6}\ \mathrm{dyne}. This is a noteworthy result since the horizontal component which was mostly

Fi,⊥F_{i,\perp} (dyne)Pressure (mTorr)rf power (W)TiT_i (K)viv_i (m/s)
3.3×10−63.3\times10^{-6}6.15105501690
3.4×10−63.4\times10^{-6}6.15105501740
2.3×10−62.3\times10^{-6}8.25105001620

Table 1. Ion velocity and ion temperature from IVDFs and corresponding ion drag force values.

neglected in past studies due to non availability of true ion velocity and temperature information is of same order of magnitude as the vertical component. This shows that different components of the ion drag force are important and should be taken into consideration in complex plasmas. The measured horizontal component of the ion drag force is also higher than in computational simulations of an rf discharge by Iкruthi et al. [55]. The main reason is our higher density and lower operating pressure. Another interesting finding is that the magnitude of the total ion drag force is larger than the gravitational force. For example, the force of gravity acting on the free particles is almost one order of magnitude smaller, Fg∼3×10−7 dyneF_g\sim3\times10^{-7}\ \mathrm{dyne}. This implies that particle levitation is dominated by the electric force acting upward and the ion drag force acting downward, rather than the force of gravity. From Eq. (4) it appears that this is mainly related to a relatively high energy density neTen_eT_e of our plasma.

The horizontal component of the ion drag force over a range of a few mTorr and similar power levels is shown in Table I. The ion drag force is influenced by the ion temperature and ion velocity. Because both the ion temperature and ion velocity are reduced at higher pressure, the ion drag force is also reduced slightly but the change is within the range of error bars. Therefore, over a range of a few mTorr and similar power levels, the horizontal ion drag force is essentially constant. Although there was a measurable change in the ion velocity when dust was not present, this change is not enough to affect the ion drag force considerably.

Conclusion

In conclusion, we have presented the ion drag force calculation in xenon plasma in the presence and absence of dust particles. Although the ion drag force has previously been studied via various approaches our direct measurement of ion parameters allowed us to calculate the ion drag force transparently from appropriate theory. Changes in ion flow and temperature affect the ion drag force by just a few percent, so it is usually a reasonable approximation to neglect the effect of dust on the ion flow. However, the order of magnitude of the ion drag force that we determined is considerably stronger than recent simulations of similar discharges [55]. Moreover, we have found that the horizontal component of the ion drag force is comparable to the vertical component which may have important consequences for a wide variety of phenomena such as, for instance, void formation in presheath and sheath plasma conditions. Moreover, we have demonstrated that there exist regimes in laboratory discharges where the force of gravity acting on micrometer-size particles is considerably smaller than the electric and ion drag force. Our result presented here will provide vital information to refine coupled ion dust modeling and pave the road for future experimental and theoretical studies in complex plasma.

ACKNOWLEDGEMENTS

The authors acknowledge support from the Center for KINETIC Plasma Physics at West Virginia University to conduct LIF measurement. E. M. A thanks Thomas Steinberger for his assistance in acquiring data and helpful discussions.

DATA AVAILABILITY

The data that support the findings of this study are available from the corresponding author upon reasonable request.

References

  1. [1]C. K. Goertz, “Dusty plasmas in the solar system,” Rev. Geophys. 27, 271 (1989).DOI
  2. [2]M. Hirabayashi et al., Acta Astronautica 207, 392–402 (2023).
  3. [3]L. Guo et. al, Phys. Plasma 28, 083701 (2021).
  4. [4]Markus H. Thoma et. al, npj Microgravity 9, 13 (2023).
  5. [5]H. M. Thomas and G. E. Morfill, “Melting dynamics of a plasma crystal,” Nature 379, 806–809 (1996).DOI
  6. [6]S. A. Khrapak, B. A. Klumov, P. Huber, V. I. Molotkov, A. M. Liapev, V. N. Naumkin, H. M. Thomas, A. V. Ivlev, G. E. Morfill, O. F. Petrov, V. E. Fortov, Yu. Malentschenko, and S. Volkov, “Freezing and melting of 3D complex plasma structures under microgravity conditions driven by neutral gas pressure manipulation,” Phys. Rev. Lett. 106, 205001 (2011).DOI
  7. [7]S. Jaiswal and E. Thomas Jr., “Melting transition of two−dimensional complex plasma crystal in the dc glow discharge,” Plasma Res. Express 1, 025014 (2019).arxiv.org/abs/2004.14609
  8. [8]S. Jaiswal, M. Y. Pustylnik, S. Zhdanov, H. M. Thomas, A. M. Liapev, A. D. Usachev, V. I. Molotkov, V. E. Fortov, M. H. Thoma, and O. V. Novitskii, “Dust density waves in a dc flowing complex plasma with discharge polarity reversal,” Physics of Plasmas 25, 083705 (2018).DOI
  9. [9]Chun-Shang Wong, J. Goree, C. Haraldson, and Bin Liu, “Strongly coupled plasmas obey the fluctuation theorem for entropy production,” Nature Physics 14, 21–24 (2018).DOI
  10. [10]S. A. Khrapak, “Entropy of strongly coupled Yukawa fluids,” Phys. Rev. E 110, 034602 (2024).DOI
  11. [11]G. E. Morfill and A. V. Ivlev, “Complex plasmas: An interdisciplinary research field,” Rev. Mod. Phys. 81, 1353 (2009).DOI
  12. [12]M. Chaudhuri, A. V. Ivlev, S. A. Khrapak, H. M. Thomas, and G. E. Morfill, “Complex plasma—the plasma state of soft matter,” Soft Matter 7, 1287–1298 (2011).
  13. [13]D. Huang, M. Baggioli, S. Lu, Z. Ma, and Y. Feng, “Revealing the supercritical dynamics of dusty plasmas and their liquidlike to gaslike dynamical crossover,” Phys. Rev. Research 5, 013149 (2023).DOI
  14. [14]S.A. Khrapak, “Elementary vibrational model for transport properties of dense fluids,” Phys. Rep. 1050, 1–29 (2024).DOI
  15. [15]V. N. Tsyto­vich, “Dust plasma crystals, drops, and clouds,” Phys.-Usp. 40, 53–94 (1997).
  16. [16]Michael Kretschmer, Markus Thoma, Herwig Hofner, Gregor Morfill, Alexander Usachev, Andrey Zobnin, Oleg Petrov, and V. Fortov, “Self-organization in complex plasmas— lane formation and beyond,” 2008 IEEE 35th International Conference on Plasma Science 1, (2008).DOI
  17. [17]A. Melzer, A. Homann, and A. Piel, “Experimental investigation of the melting transition of the plasma crystal,” Phys. Rev. E 53, 2757 (1996).pubmed.ncbi.nlm.nih.gov/9964566
  18. [18]M Schwabe, S A Khrapak, S K Zhdanov, M Y Pustylnik, C Räth, M Fink, M Kretschmer, A M Liapev, V I Molotkov, A S Schmitz, M H Thoma, A D Usachev, A V Zobnin, G I Padalka, V E Fortov, O F Petrov, and H M Thomas, “Slowing of acoustic waves in electrorheological and string-fluid complex plasmas,” New J. Phys. 22, 083079 (2020).DOI
  19. [19]Surabhi Jaiswal, P. Bandyopadhyay, and A. Sen, “Experimental observation of precursor solitons in a flowing complex plasma,” Phys. Rev. E 93, 041201 (2016).DOI
  20. [20]S. Jaiswal, P. Bandyopadhyay, and A. Sen, “Experimental investigation of flow induced dust acoustic shock waves in a complex plasma,” Physics of Plasmas 23, 083701 (2016).DOI
  21. [21]M. Rosenberg, “Ion-dust streaming instability in processing plasmas,” Journal of Vacuum Science & Technology A 14, 631–633 (1996). https://pubs.aip.org/avs/jva/article-pdf/14/2/631/12049564/631_1_online.pdf.DOI
  22. [22]V. E. Fortov, A. G. Khrapak, S. A. Khrapak, V. I. Molotkov, A. P. Nefedov, O. F. Petrov, and V. M. Torchinsky, “Mechanism of dust-acoustic instability in a direct current glow discharge plasma,” Phys. Plasmas 7, 1374–1380 (2000).DOI
  23. [23]A. A. Mamun and P. K. Shukla, “Discoveries of waves in dusty plasmas,” Journal of Plasma Physics 77, 437–455 (2011).DOI
  24. [24]J. Goree, G. E. Morfill, V. N. Tsy­tovich, and S. V. Vladimirov, “Theory of dust voids in plasmas,” Phys. Rev. E 59, 7055–7067 (1999).pubmed.ncbi.nlm.nih.gov/11969694
  25. [25]M. Kretschmer et al., “Force field inside the void in complex plasmas under microgravity conditions,” Phys. Rev. E 71, 056401 (2005).pubmed.ncbi.nlm.nih.gov/16089654
  26. [26]A. M. Lipaev, S. A. Khrapak, V. I. Molotkov, G. E. Morfill, V. E. Fortov, A. V. Ivlev, H. M. Thomas, A. G. Khrapak, V. N. Naumkin, A. I. Ivanov, S. E. Tretschev, and G. I. Padalka, “Void closure in complex plasmas under microgravity conditions,” Phys. Rev. Lett. 98, 2650006 (2007).pubmed.ncbi.nlm.nih.gov/17678099
  27. [27]D. Hirt, D. Block, and A. Piel, “Measurement of the ion drag force on free falling microspheres in a plasma,” Phys. Plasmas 11, 5690 (2004).DOI
  28. [28]C. Zafiu, A. Melzer, A., and Piel, “Measurement of the ion drag force on falling dust particles and its relation to the void formation in complex (dusty) plasmas,” Phys. Plasmas 10, 1278–1282 (2003).DOI
  29. [29]S. A. Khrapak, A. V. Ivlev, G. E. Morfill, H. M. Thomas, S. K. Zhdanov, U. Konopka, M. H. Thoma, and R. A. Quinn, “Comment on “measurement of the ion drag force on falling dust particles and its relation to the void formation in complex dusty plasmas”,” Phys. Plasmas 10, 4579–4581 (2003).
  30. [30]V. Nosenko, R. Fisher, R. Merlino, S. Khrapak, G. Morfill, and K. Avinash, “Measurement of the ion drag force in a collisionless plasma with strong ion-grain coupling,” Phys. Plasmas 14, 103702 (2007).DOI
  31. [31]J. Beckers, D. J. M. Trienekens, and G. M. W. Kroesen, “Absolute measurement of the total ion-drag force on a single plasma-confined microparticle at the void edge under microgravity conditions,” Phys. Rev. E 88, 055101 (2013).pubmed.ncbi.nlm.nih.gov/24329393
  32. [32]V. Yaroshenko, S. Ratynskaia, S. Khrapak, M. H. Thoma, M. Kretschmer, H. Höfner, G. E. Morfill, A. Zobnin, A. Usachev, O. Petrov, and V. Fortov, “Determination of the ion-drag force in a complex plasma,” Phys. Plasmas 12, 093503 (2005).
  33. [33]L Wimmer, S Beppler, N Dormagen, M Klein, M Kretschmer, A M Lipaev, M Schwarz, A D Usachev, O F Petrov, T A Zeller, A V Zobnin, and M H Thoma, “Investigation of charge and ion drag force dynamics in complex plasma experiments with neon and argon under microgravity,” New J. Phys. 27, 114301 (2025).DOI
  34. [34]J. Niemann, V. Schneider, and H. Kersten, “Measurement of ion drag force in the pre-sheath of single- and dual-frequency ccps using optically trapped microparticles,” Phys. Plasmas 32, 093504 (2025).DOI
  35. [35]A.A. Uglov and A.G. Gnedovets, “Effect of particle charging on momentum and heat-transfer from rarefied plasma-flow,” Plasma Chem. Plasma Proc. 11, 251–267 (1991).DOI
  36. [36]M. S. Barnes, J. H. Keller, J. C. Forster, J. A. O’Neill, and D. K. Coulta, “Transport of dust particles in glow-discharge plasmas,” Phys. Rev. Lett. 68, 313 (1992).pubmed.ncbi.nlm.nih.gov/10045860
  37. [37]S. A. Khrapak, A. V. Ivlev, G. E. Morfill, and H. M. Thomas, “Ion drag force in complex plasmas,” Phys. Rev. E 66, 046414 (2002).pubmed.ncbi.nlm.nih.gov/12443337
  38. [38]S. A. Khrapak, A. V. Ivlev, G. E. Morfill, and S. K. Zhdanov, “Scattering in the attractive yukawa potential in the limit of strong interaction,” Phys. Rev. Lett. 90, 225002 (2003).pubmed.ncbi.nlm.nih.gov/12857316
  39. [39]S.A. Khrapak, A.V. Ivlev, G.E. Morfill, S.K. Zhdanov, and H.M. Thomas, “Scattering in the attractive Yukawa potential: Application to the ion-drag force in complex plasmas,” IEEE Trans. Plasma Sci. 32, 555–560 (2004).DOI
  40. [40]S. A. Khrapak, A. V. Ivlev, and G. E. Morfill, “Momentum transfer in complex plasmas,” Phys. Rev. E 70, 056405 (2004).
  41. [41]A. V. Ivlev, S. A. Khrapak, S. K. Zhdanov, G. E. Morfill, and G. Joyce, “blank,” Phys. Rev. Lett. 92, 205007 (2004).
  42. [42]A. V. Ivlev, S. K. Zhdanov, S. A. Khrapak, and G. E. Morfill, “blank,” Phys. Rev. E 71, 016405 (2005).
  43. [43]S. A. Khrapak, S. K. Zhdanov, A. V. Ivlev, and G. E. Morfill, “Drag force on an absorbing body in highly collisional plasmas,” J. App. Phys. 101 (2007).
  44. [44]A. V. Ivlev, S.K. Zhdanov, S.A. Khrapak, and G.E. Morfill, “Ion drag force in dusty plasmas,” Plasma Phys. Control. Fusion 46, B267–B279 (2004).DOI
  45. [45]S. A. Khrapak, A. V. Ivlev, S. K. Zhdanov, and G. E. Morfill, “Hybrid approach to the ion drag force,” Phys. Plasmas 12, 042308 (2005).DOI
  46. [46]L. Patacchini and I. H. Hutchinson, “Fully self-consistent ion-drag-force calculations for dust in collisional plasmas with an external electric field,” Phys. Rev. Lett. 101, 025001 (2008).pubmed.ncbi.nlm.nih.gov/18764185
  47. [47]I. H. Hutchinson and C. B. Haakonsen, “Collisional effects on nonlinear ion drag force for small grains,” Phys. Plasmas 20, 083701 (2013).
  48. [48]R. P. Dahiya, G. V. Paeva, W. W. Stoffels, E. Stoffels, G. M. W. Kroesen, K. Avinash, and A. Bhattacharjee, “Evolution of a dust void in a radio-frequency plasma sheath,” Phys. Rev. Lett. 89, 125001 (2002).pubmed.ncbi.nlm.nih.gov/12225088
  49. [49]E. Aguirre, S. Jaiswal, S. Khrapak, and P. Mehrotra, “Experimental measurement of ion properties in complex plasma by laser induced fluorescence,” Plasma Sources Sci. Technol. (2026, in press), 10.1088/1361-6595/aeb06b.DOI
  50. [50]Timothy B. Smith, Deconvolution of Ion Velocity Distributions from Laser-Induced Fluorescence Spectra of Xenon Electrostatic Thruster Plumes, Ph.D. thesis, University of Michigan (2003).
  51. [51]J E Allen, “Probe theory - the orbital motion approach,” Phys. Scripta 45, 497–503 (1992).DOI
  52. [52]V Fortov, A Ivlev, S Khrapak, A Khrapak, and G Morfill, “Complex (dusty) plasmas: Current status, open issues, perspectives,” Physics Reports 421, 1–103 (2005).DOI
  53. [53]S. A. Khrapak, H. M. Thomas, and G. E. Morfill, “Multiple phase transitions associated with charge cannibalism effect in complex (dusty) plasmas,” Europhysics Letters 91, 25001 (2010).DOI
  54. [54]S. A. Khrapak, Y.-F. Wu, and C.-R. Du, “A binary collision approach in one-component plasmas: How close to the Frenkel line can we go?” Phys. Plasmas 32, 092114 (2025).DOI
  55. [55]V. R. Ikkurthi, K. Matyash, A. Melzer, and R. Schneider, “Computation of charge and ion drag force on multiple static spherical dust grains immersed in rf discharges,” Physics of Plasmas 17, 103712 (2010).

Paper details

vlnc:W_t5jqddqn
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents