WorksPhysics and Astronomy
Anisotropic Thermalization in Far-from-Equilibrium Flows
Abstract
We present a deterministic discontinuous Galerkin (DG) finite-element solution of the Boltzmann equation, without moment-closure approximations, under a class of far-from-equilibrium deformations. Specifically, we consider affine flows which reduce the Boltzmann equation to a purely velocity-space problem for the reduced distribution function in a reduced velocity field. We solve the reduced equation using a tensor-product Lagrange DG discretization for four representative flows: simple shear, pressure shear, bi-directional shear, and a vortex flow. Our principal finding is that the velocity distribution is well-approximated by an anisotropic Gaussian throughout the evolution, despite the non-equilibrium conditions. Further, we show the evolution of the covariance tensor of the Gaussian distribution is equal to the inverse of the right Cauchy-Green tensor in the free-streaming limit without collisions. This prediction compares very well with the numerical solution at short times; at longer times, they grow apart, reflecting the influence of particle collisions.
Introduction
The Boltzmann equation provides a description of matter in the regime that is between the completely discrete atomistic and the classical continuum models [76]. It provides the fundamental kinetic-theory basis for non-equilibrium thermodynamics, rarefied gas flow [76], and the derivation of macroscopic transport equations from first principles [24, 22, 15]. It has been applied to model dilute systems of large numbers of particles that interact in a pairwise manner, for instance phonons carrying thermal energy that lead to heat transfer [81]; electrons in semiconductors [33]; plasmas [63]; and particulate materials [51, 75, 25].
The Boltzmann equation is posed in terms of a molecular distribution function , that provides the number of particles at spatial location with velocity , at time . Direct numerical solution is challenging: the distribution function depends on three spatial coordinates, three velocity coordinates, and time, making standard numerical approaches prohibitively expensive.
Affine flows and the homoenergetic reduction. An important class of exact solutions of the Boltzmann equation corresponds to spatially affine (homogeneous) velocity fields. The idea that molecular dynamics simulations can be performed for flows of this type, using only a small symmetry-reduced unit cell, originates in the concept of objective molecular dynamics (OMD) introduced by James and collaborators [46, 28]. The time-dependent non-equilibrium generalization, appropriate for transient shear and viscometric flows, was developed by Dayal and James for molecular dynamics [29] and shown to hold also for the Boltzmann equation [30, 67, 66, 68]. Specifically, there exists a large class of flows that reduce the molecular distribution function, denoted the homoenergetic reduction, that have form , where is a change of variables with an arbitrary constant tensor. This reduction is motivated by fundamental invariances related to frame-indifference.
These solutions are generically nonequilibrium flows that evolve in time, and represent a vast variety of physical flows for different choices of . These solutions are related to, and can be considered a generalization of, the Lees-Edwards boundary conditions that are used to simulate Couette flows with molecular dynamics [54, 26, 21, 36, 69, 70]. The mathematical structure of these homoenergetic solutions was analyzed in depth by James, Nota, and Velázquez [47, 49], who established existence, self-similar long-time asymptotics, and the precise roles of collision-dominated and hyperbolic-dominated regimes. The kinetic-theory description connecting OMD to the Boltzmann equation was formalized by James, Qi, and Wang [50].
Numerical methods for the Boltzmann equation. Numerical methods for the solution of the Boltzmann equation follow two principal strategies for the velocity-space discretization: (i) spectral methods based on the Fourier transform of the collision operator [65, 61, 35], and (ii) discontinuous Galerkin (DG) finite-element methods in velocity space, pioneered by Alekseenko and Josyula [7] and extended by Jaiswal, Alekseenko, and Hu [44, 45] and by Zhang and Gamba [80]. Atomistic OMD simulations [67, 66] provide molecular dynamics trajectories but not a direct solution of the kinetic equation.
Observation of anisotropic thermalization. The relaxation of anisotropic velocity distributions toward equilibrium is a fundamental problem in non-equilibrium statistical mechanics. Cross-dimensional relaxation measurements have been used to infer collision rates: in early precision measurements of ultracold Cs–Cs elastic scattering, Monroe et al. inferred the scattering rate from the decay of anisotropy in an initially non-equilibrium energy distribution [59]. When the scattering cross-section itself is anisotropic, the thermalization rate can become direction-dependent, a phenomenon often referred to as anisotropic thermalization: in ultracold dipolar gases, the re-thermalization rate can vary by as much as a factor of two with the orientation of the dipoles relative to the excitation geometry [16, 5, 79].
For the dilute classical gas, the relaxation behaviour depends sensitively on the collision kernel. The Bobylev–Krook–Wu solution [20] gives a closed form for spatially homogeneous relaxation of Maxwell molecules and is widely used to verify deterministic Boltzmann solvers. For homoenergetic flows of the same affine form considered here, James, Nota and Velázquez [47] proved that, for Maxwell molecules and a large class of flows, the long-time dynamics can be governed by non-Maxwellian self-similar profiles describing far-from-equilibrium states. For uniform shear flow, analytical and numerical studies of Maxwell molecules likewise show non-Maxwellian self-similar profiles and provide evidence for highly anisotropic, algebraically decaying high-velocity tails [11, 31]; a comprehensive account of the nonlinear-transport properties of sheared gases is given in the monograph of Garzó and Santos [37].
A natural way to encode the resulting anisotropy is through a tensorial temperature, defined from the full kinetic-energy tensor rather than from its trace alone. In non-equilibrium molecular dynamics, related ideas appear in modified thermostatting strategies for imposed flows, in which different Cartesian velocity components may be thermostatted separately to remove viscous heat without directly damping the imposed streaming motion; related thermostatting issues arise in sheared-liquid MD near solid boundaries [77] and in later studies of nanoscale slip and interfacial friction in confined geometries [34]. The same kinetic-tensor structure underlies the ellipsoidal-statistical BGK model [41, 9], in which the isotropic Maxwellian relaxation target is replaced by an ellipsoidal Gaussian whose temperature tensor is tied to the stress tensor, and the anisotropic moment closures developed for relativistic dissipative fluid dynamics [60]. Sega and Jedlovsky [74] have emphasized that imposing a tensorial temperature through a thermostat can yield ensembles that differ from the canonical one for molecular fluids near interfaces, so the concept requires care when used as a modeling input.
The detailed analytical results just summarized concern primarily Maxwell molecules, and the tensorial-temperature constructions above arise as modeling or thermostatting choices. The present work is complementary in two respects: it addresses hard spheres under the three-dimensional affine flows considered here via deterministic discontinuous Galerkin solution of the Boltzmann equation, and the fitted covariance plays the role of a tensorial temperature measured from the solution rather than imposed. Its principal axes and eigenvalue spectrum, analyzed in the remainder of this section, provide an intrinsic characterization of the anisotropic thermalization of the gas under sustained affine deformation.
Contributions of this paper. In this work, we examine the time evolution of the invariance-reduced solutions using a Discontinuous Galerkin Finite Element Method (DG-FEM) formulation that has been shown to be well-suited to solving the Boltzmann equation in other settings [7, 80, 44, 45, 12]. The DG-FEM approach reduces the computation of the Boltzmann collision operator from for a brute-force evaluation to , where is the number of quadrature points per direction in velocity space [7]. Crucially, in combination with the reduction enabled by the homoenergetic invariance, DG-FEM provides a method to numerically compute solutions of the full Boltzmann collision integral without resorting to moment closure approximations such as BGK [13] or Grad’s thirteen-moment system [56]. The conservation properties of the collision operator are enforced via a constrained least-squares correction following Zhang and Gamba [80], which preserves mass exactly and allows momentum and energy to evolve freely under the applied deformation. We solve using a tensor-product Lagrange DG discretisation in velocity space on and element meshes (27 and 125 elements), with a fifth-order Adams–Bashforth time integrator.
We apply this formulation to four representative homoenergetic flows: simple shear (Couette flow), pressure shear, bi-directional shear, and a vortex-like flow. We find that the velocity distribution remains well-approximated by an anisotropic Gaussian throughout the evolution, starting from an isotropic equilibrium Maxwellian and reaching anisotropy ratios of up to 9.96. We further derive that in the free-streaming regime, i.e., when collisions are neglected, the covariance tensor satisfies
where is the deformation gradient tensor and is the right Cauchy-Green tensor. The kinematic prediction (1) is compared against the numerical results in various relevant velocity-space planes via a per-plane and we find close agreement for short times while the difference grows over time and is related to the continuous spin tensor.
The paper is organized as follows. Section 2 presents the homoenergetic reduction and the four test flows. Section 3 describes the DG discretization, collision operator, conservation routine, and time integration. Section 4 derives the free-streaming kinematic prediction. Section 5 presents the numerical results. Section 6 interprets the collision-retardation and summarizes conclusions.
Notation
| component of a tensor |
Trace of a tensor
Euclidean norm of a vector
Determinant of a tensor
Hadamard product
Repeated indices Einstein summation convention unless stated otherwise
Superscript Post-collision quantity
Superscript Quantity associated with the second particle
Invariance-Reduced Formulation of the Boltzmann Equation
The Boltzmann equation is a well-established model, e.g. [76, 23, 72, 10, 57, 24]; we summarize it below to fix the notation and assumptions. The central quantity is the molecular distribution function with position , velocity , and time . It describes the probability of finding a particle in the spatial interval , in the time interval , with velocity in the interval . The spatially inhomogeneous Boltzmann equation in the absence of any external forces, for a monatomic system reads
The collision operator on the right has the form:
The pre-collision velocities are denoted as and , and the respective post-collision velocities are denoted using primes: and . For brevity, we write and similarly for the primed quantities. The scattering factor represents the physics of the collisional interaction and depends on the nature of the particle interactions. The scattering domain is represented by . An important assumption in this form of the collision operator is that particles only interact in a pairwise manner, i.e., the collisions or interactions always involve only two particles.
Evaluating the high-dimensional collision integral can be computationally prohibitive. In this work, we focus on hard spheres with elastic interactions because, first, it is relevant to a number of applications in mechanics such as granular flows and rarefied gases; and, second, closed-form expressions for the collision behavior are readily available, e.g. [76].
Invariance Reduction of the Boltzmann Equation.
The invariance reduction used in this paper was motivated by fundamental invariances inherent to molecular dynamics [46, 28] and that are inherited by the Boltzmann equation [30, 29, 48, 49, 17, 42]. Consider a periodic molecular dynamics calculation where the positions of the simulated atoms in the zero-th unit cell are where denotes the atom number in the zero-th unit cell. The periodicity is described by the lattice vectors ; we emphasize that these vectors are allowed to depend on time. The positions of the image atoms are then given by the expression:
Requiring that the image trajectories satisfy Newton’s equations with no spurious force constrains the lattice vectors to depend at most affinely on time [29, 30]: , where is a constant tensor. Different choices of realize a wide family of viscometric flows [30]. For example,
gives Couette flow with shear rate , and is equivalent to the Lees–Edwards boundary condition used in non-equilibrium molecular dynamics [54, 29, 30].
Moving from the discrete molecular description to the continuum Boltzmann description where each point in space is assumed to contain a large number of molecules, and also converting from the Lagrangian description to the Eulerian, the ansatz for the continuum deformation in terms of the continuum velocity field is:
The corresponding spatial velocity gradient is , the deformation gradient is , and . We only consider such that is non-singular.
Translating this to the Boltzmann equation, for this class of flows, the velocity statistics of the molecular distribution at any spatial point can be related to the statistics at the origin: the probability of finding a particle in with velocity in is the same as the probability of finding a particle at the spatial region with velocity in the interval . Physically, for this class of flows, the velocity statistics of the molecular distribution at any point can be related to the velocity statistics at the origin ; if we compute the statistics of the molecular distribution at the origin, we can find the statistics at any point in space.
This motivates the homoenergetic ansatz
where is the reduced velocity. While motivated by molecular considerations, the reduction can be verified by direct substitution [29, 30]. Substituting (7) into (2.1), we get:
where the reduced form of the Collision operator is:
We next notice that for flows , we have . By differentiating with respect to , we get:
Therefore, (8) reduces to the spatially homogeneous form:
Evolution of Macroscopic Quantities
The number density, mean reduced velocity, and reduced second moment are
The specific internal energy is then . Further, from (7), the continuum velocity is related to by [29]:
a. Number-density evolution. Integrating (11) over and using integration by parts on the transport term yields
where we use mass conservation by the collision operator: . Equation (16) is the statement of local mass conservation under the homoenergetic reduction: with spatially uniform, continuity reduces to , which integrates to .
b. Energy-moment evolution. Multiplying (2.10) by and integrating, using integration by parts on the transport term and energy conservation by elastic collisions:
gives
where is the strain-rate tensor.
c. Specific energy. Writing the kinetic energy per unit volume as , which defines the specific internal energy per particle, and differentiating, then combining with (2.15) and (2.16) gives:
The molecular mass enters only through the kinetic energy density ; it does not appear in the per-particle energy . The compressibility of the flow enters only through . For the flows with analyzed in § 2, both and are such that , so has zero slope at . As evolves, becomes strictly positive and grows monotonically, consistent with the numerical observations.
Affine Flows
We study four affine flows, defined by different choices of . The symmetric (rate-of-strain) and antisymmetric (spin) parts of are and ; we use them to characterize the flows in Table 1.
| Flow | Nonzero entries of | Nonzero |
| Simple shear | ||
| Pressure shear | , | |
| Bi-dir. shear | , , | , , |
| Vortex | , , | , , |
Table 1. Test flows: nonzero entries of (all unspecified entries are zero), nonzero entries of spin .
These flows are visualized in Figure 1 through the deformation of a reference cube of material. For simple shear, bi-directional shear, and vortex flows, we have throughout; for pressure shear, , reflecting the compression along . Figure 2 shows the instantaneous velocity field for the vortex-like flow at two times; the view is aligned with the vorticity axis to reveal the rotational character of the flow.

Figure 1. (a) Deformation under simple shear (). The flow is volume-preserving and the cube is sheared in the direction by an amount proportional to , with no deformation in the direction. (b) Deformation under pressure shear (, ). The simultaneous compression along (visible as the shrinking of the cube in that direction making at ) and shear in the - plane (visible as the progressive tilt of the faces) are discussed in Section 6.C. (c) Deformation under bi-directional shear (, , ). The three simultaneously active shear couplings produce a three-dimensional deformation: the cube develops non-trivial tilt in all three coordinate planes, in contrast to the planar character of simple and pressure shear. (d) Deformation under the vortex-like flow (, , ). The dominant antisymmetric coupling () produces a pronounced rotational character: successive snapshots trace a near-circular arc in the - plane, while the residual shear introduces a secondary tilt out of that plane. Figure 1. Deformation of a reference cube at (dark grey wireframe) under the different flows at intervals of .

Figure 2. Instantaneous velocity field for the vortex-like flow at (left) and (right), evaluated on a uniform grid of sample points inside a cubic box (black wireframe). Arrows are normalized to uniform length and colored by speed. The view is directed along the vorticity axis so that the rotational circulation appears in the perpendicular plane. The field at differs visibly from , illustrating the time-dependence of even when is constant.
Lengths are non-dimensionalized by the mean free path , velocities by the most probable thermal speed , and time by the mean collision time . With this choice, the non-dimensional Boltzmann equation retains the form (2.10) with the collision frequency . The entries of in Table 1 are therefore the non-dimensional velocity gradients.
Numerical Method
We use the Discontinuous Galerkin Finite Element Method (DG-FEM) to solve the invariance-reduced Boltzmann equation (2.10), following recent work that has shown the efficacy of DG-FEM for the Boltzmann equation as well as moment closure equations based on the Boltzmann equation [7, 38, 39, 8 AGI12, 7, 12]. Other alternatives are Fourier-based methods [64, 61, 38] and Monte Carlo methods [73, 15, 78, 14].
The key computational expense is in computing the collision operator. It has been shown by [7] that the use of symmetries and other techniques can reduce the computation from for the brute force computation of the Boltzmann collision operator to , where is the number of quadrature points in each direction in velocity space. Many aspects here follow closely their method, and refer to their work for details. We describe here only the overall structure and key points of difference. The key computational expense is in computing the collision operator. It has been shown by [7] that the use of symmetries and other techniques can reduce the computation from for the brute force computation of the Boltzmann collision operator to , where is the number of quadrature points in each direction in velocity space. Many aspects here follow closely their method, and we refer to their work for details. We describe here only the overall structure and key points of difference. The principal points of difference are the following. First, whereas [7] solve the spatially homogeneous Boltzmann equation, we solve the homoenergetic reduction, in which the affine deformation enters through the transport term ; this term is
discretized in the same reduced velocity variable as the collision operator, so that no separate physical-space advection step is required and the strongly anisotropic distributions produced by the flow are resolved on the same mesh. Second, the constrained conservation correction (§ 1.2.D) is applied selectively: for the driven affine flows only mass is enforced, with momentum and energy left unconstrained, since the deformation continuously supplies both. Third, for compressible flows the mass constraint is made time-dependent (§ 1.2.E), targeting so that the density follows the compression or expansion of the flow. These choices adapt the methods of [7, 80] to the time-dependent deformations studied here.
DG-FEM velocity-space discretisation
Computational domain. The reduced velocity domain is truncated to with (in thermal-speed units). We use a Maxwellian initial condition and the simulation is halted before the distribution function reaches the domain boundary to avoid domain-truncation artefacts.
Mesh. is partitioned into cubic elements of equal side length . Two meshes are used:
: elements, .
: elements, .
Within each element , a local coordinate is introduced via the affine map
where is the -th coordinate of the centre of .
Basis functions. On each element we use the tensor-product Lagrange basis of degree (quadratic, three Gauss–Legendre nodes per direction):
where is the -th Lagrange polynomial on the three Gauss–Legendre nodes . Each element has degrees of freedom. The global approximation space has dimension (729 for the mesh, 3375 for the mesh).
The approximate solution restricted to element is
where is the affine map (3.1) from physical to reference coordinates and are the time-dependent nodal coefficients.
Weak formulation
Multiplying (2.10) by a test function , integrating over an element , and integrating the drift term by parts gives:
where denotes the numerical flux.
Using the DG-FEM approximation and as test functions, we can follow the usual finite element manipulations to arrive at the final evolution equations in the discretized form:
where the operators are:
and is:
The operators have the following properties:
Sparsity and locality. The DG basis restricts all integrations to a single element; , , and are accordingly sparse.
Uniformity. On a uniform mesh, the operators are identical across elements, so they need only be computed once.
Diagonal mass matrix. Orthogonality of the Lagrange basis makes diagonal, enabling direct inversion in the time-stepping scheme (3.5).
Time independence of and . Both are independent of and are precomputed and stored once; depends on through and is recomputed each step.
Collision operator compression. The symmetry properties of , as discussed in [7] lets us reduce the memory storage for the collision operator dramatically. In case of a uniform cubical mesh, all we need to do is to compute the collision operator for a single element (in our case, we compute for the central element of the domain) and the values for the rest of the elements could be obtained using the invariance property.
Quadrature accuracy. In order to achieve an accuracy of in the collision operator approximation, which is required for accurate time integration that predicts the correct relaxation times and preserves the lower moments, we use adaptive quadrature for calculating following [7].
The term is an integration over the element boundaries to introduce the numerical flux. Unlike classical FEM where inter-element continuity is enforced through the choice of shape functions, DG-FEM enforces inter-element continuity in a weak sense; in hyperbolic problems, this corresponds to a numerical flux. Following [12, 53], we use the upwind form of the Lax–Friedrichs numerical flux, denoted by , for the inter-element communication in the boundary term :
where denote the traces from the interior () and exterior () sides of the face, and is the outward unit normal from the current element. This form of the Lax–Friedrichs upwind flux is obtained by setting in the general formula of [43]. Equivalently, (27) can be written as:
Discrete evaluation of the collision tensor.
The collision tensor is the dominant computational cost of the method, but it is a one-time precomputation: because is independent of both and , it is assembled once before the time loop and stored. Each time step then requires only the evaluation of the matrix–vector product:
The key reduction follows [7]: the use of symmetry properties of the collision operator reduces the nominal cost of the brute-force integral to , where is the number of quadrature points per direction in velocity space. This reduction exploits the orthogonality of the Lagrange basis (Lemma 3.1 in [7]), which means the volume integrals over and in reduce to products of Gauss quadrature weights evaluated at the nodal positions, leaving only the angular integral over to be performed numerically. Adaptive quadrature over is used following [7] to achieve a collision operator accuracy of , which is required to preserve lower moments and predict correct relaxation times.
The translation-invariance of the hard-sphere kernel (Lemma 4.2 in [7]) means that on a uniform mesh need only be computed for a single (central) element; the entries for all remaining elements are recovered by the invariance property, substantially reducing both memory and precomputation cost. The local support of the DG basis functions additionally makes sparse, since most pairs have non-overlapping collision spheres with respect to most test functions .
Conservation correction
The discrete collision operator does not exactly conserve moments due to truncation of the velocity domain at . Following Zhang and Gamba [80], a constrained least-squares correction is applied after each collision evaluation. The corrected operator is the solution of
where is a constraint matrix whose rows select the moments to be enforced. The solution is
An important distinction between equilibrium and non-equilibrium settings applies here. For the spatially homogeneous relaxation problem (), contains constraints for mass, momentum, and all three second moments (energy). For the affine flows studied here (), only mass conservation is enforced; momentum and energy are left unconstrained, because the applied deformation continuously transfers momentum and energy to the system.
Time-dependent conservation constraint for compressible flows
For an incompressible flow with , we have for all . The projection described in Section 3.D enforces , holding the number density fixed at its initial value and corrects against discretization errors.
For compressible flows with , however, the number density evolution is:
where is the Jacobian of the deformation gradient. We therefore modify the conservation constraint to target the
Equivalently, the constraint enforces . For the pressure-shear flow studied in § 3.C, the modified constraint allows for compressibility and Figure 10 shows that the resulting number density tracks the closed-form expression to within numerical precision.

Figure 10. Number density for the dilatative pressure shear flow (6.1). The FEM solution (markers) tracks the analytical prediction (solid line) throughout, demonstrating that the discrete solver correctly captures the compressibility of the flow.
Time integration
The system of ODEs for the nodal coefficients obtained from (3.4) is integrated using a two-stage explicit multi-step scheme [40]. The first four time steps use a fifth-order Runge–Kutta method to generate the startup history required by the multi-step integrator. All subsequent steps use the fifth-order Adams–Bashforth formula:
where collects the right-hand side of (3.4) for all degrees of freedom at step . The time step is .
Code verification
The DG-FEM implementation was verified in two stages that test the collision operator and the transport operator independently; full details and figures are given in [27].
a. Collision operator: spatially homogeneous relaxation. Setting eliminates the transport term and isolates the collision operator. Two experiments were run on both meshes. Experiment 1 uses a sum of two shifted Maxwellians at different temperatures and bulk velocities as the initial condition:
Experiment 2 uses discontinuous (top-hat) initial data. In both cases the solution converges to a single isotropic Maxwellian, consistent with Boltzmann’s -theorem. Mass, momentum, and energy are conserved throughout to relative deviations below , confirming the correctness of the collision operator computation and the conservation correction of Section 3.D.
b. Transport operator: method of manufactured solutions. The transport term of (2.10) was verified independently using the method of manufactured solutions [71]. The manufactured solution
satisfies the initial and boundary conditions for all . Substituting into (where ) produces the source term
Simple shear () was used for . The fifth-order Adams–Bashforth scheme recovers (3.18) with errors consistent with the expected order of accuracy, confirming the correctness of both the DG-FEM discretisation and the time integration.
Mesh convergence
Both the and meshes are run for all four flows. The principal axis angle of the fitted Gaussian (see § 1.3) agrees to within between the two meshes at every time step and for every flow. The fitted eigenvalue magnitudes show a systematic offset of approximately 10–15% between meshes; the mesh gives larger eigenvalues, consistent with the finer resolution capturing more anisotropy before numerical dissipation reduces it. All quantitative results reported in Section 5 use the mesh unless otherwise noted.
Free-Streaming Kinematic Prediction
In the absence of collisions, the reduced equation (2.10) reduces to the pure advection problem:
The characteristics of (4.1) satisfy
with solution
where satisfies , . Along these characteristics is constant:
Proposition 4.1 (Characteristic solution). For the homoenergetic velocity gradient , the characteristic map is
where is the deformation gradient.
Proof. Let . Differentiating:
Since commutes with , we have , so
Since , this gives .
Since is constant along characteristics and the characteristic passing through at time originated at , the free-streaming solution is
Here and are the values of the same characteristic in the reduced velocity space at times and 0, both elements of the same ; accordingly enters (4.6) as the linear map on velocity space defined in Proposition 4.1, not as a two-point deformation gradient acting on a spatial vector. The distribution function value is simply transported along characteristics unchanged. The number density does change for compressible flows: , as verified by integrating (4.1) over .
Evolution of the Covariance
For the Maxwellian initial condition , the free-streaming solution (4.6) is:
The covariance is defined as . Substituting (implying , ):
and using gives:
where is the rate-of-strain tensor evaluated at , to be distinguished from the time-dependent spatial rate-of-strain appearing in the energy balance (18). At leading order in , , so the initial rate of change of the covariance is controlled entirely by the strain rate .
Results
Anisotropic Gaussian structure
The central finding in this paper is that the reduced velocity distribution is close to an anisotropic Gaussian away from equilibrium. This can be observed visually: Figure 3 shows representative planar views of the isotropic gaussian velocity distribution at on the plane, and the development of anisotropy at , and Figure 4 shows the evolution of on cross-sectional slices.

Figure 3. Cross-sectional slice view of on the 3 axes on the mesh for the vortex like flow.

(a) Evolution of on ,

(b) Evolution of on ,

(c) Evolution of on ,
Figure 4. Cross-sectional slice view of on the 3 planes on the mesh for the vortex like flow.
We fit the velocity distribution at various times for all of the flows to an anisotropic (i.e., multivariate) Gaussian as described in Section B using the (125-element) mesh. Figure 5 provides the relative residual that quantifies the quality of the Gaussian approximation. Figure 6 to Figure 8 show the evolution of the fitted covariance through the eigenvalues of , the anisotropy ratio , and the primary-plane principal axis angle, and are discussed in detail below.

Figure 5. Relative residual of the Gaussian fit, , vs. time for the four affine flows on the mesh.

Figure 6. Eigenvalues of the fitted covariance matrix vs. time for all four flows. Solid lines: mesh. Dashed lines: mesh. The initial isotropic Maxwellian has .

Figure 8. Principal axis angle in the primary velocity-space plane vs. time for all four flows. Solid lines: mesh. Dashed lines: mesh. Primary plane is - for simple shear, bi-directional shear, and vortex; it is - for pressure shear. The and meshes agree to within throughout.
Simple shear. The largest eigenvalue grows from 0.73 to 3.53 (factor of 4.8) over the simulation, while increases by only a factor of 2.0. The anisotropy ratio grows monotonically from 1.91 to 4.61. Off-diagonal covariance components and are numerically negligible (), confirming that the flow is purely two-dimensional in the - plane, as expected from .
Pressure shear. Pressure shear couples compression along () with shear in the - plane (). The off-diagonal components and are negligible (), confirming a purely 2D flow in the - plane. The anisotropy ratio grows more rapidly than for simple shear (reaching 6.84 at vs. 4.61 for simple shear at per unit time elapsed), consistent with the larger shear component .
Bi-directional shear. Unlike simple shear and pressure shear, whose dynamics remain confined to a single reduced velocity-space plane (- and - respectively), bi-directional shear drives anisotropy in a fully three-dimensional manner. The three shear couplings , , and act simultaneously, so the principal eigenvector of acquires non-negligible components along all three velocity axes, and all three planar marginals show significant principal-axis rotation (Figure 9). This flow therefore exercises the full six-component covariance structure rather than a single sub-block, demonstrating that the anisotropic-Gaussian description and the free-streaming prediction extend to genuinely three-dimensional anisotropy.

Figure 9. Per-plane principal axis angle vs. time for all four flows (detailed view complementing Figure 8). Solid curves: free-streaming prediction from (47). Circles: data. Squares: data. Annotated numbers: gap in degrees. Blue border: primary plane. .
Vortex. The vortex flow shows the fastest anisotropy growth among the four flows: reaches 9.95 at , whereas simple shear requires to reach 4.61. The eigenvalues and decrease initially over time (unlike simple shear, where all eigenvalues grow), indicating that the vortex preferentially concentrates the variance along a single direction and then eventually increases.
Eigenvalue and Anistropy Evolution
Figure 6 shows the eigenvalues of the fitted covariance matrix as functions of time for all four flows on both meshes. In all four flows, grows significantly while and remain comparatively bounded, producing a characteristic one-directional stretching of the velocity distribution. The two meshes agree closely on all eigenvalues; the mesh produces slightly larger values (by 10–15%) due to its lower numerical diffusion. A notable difference among the flows concerns the minor eigenvalues: for simple shear all three eigenvalues grow (the distribution stretches without compression), whereas for the vortex and decrease, reflecting the concentration of variance onto a single dominant direction by the rotational kinematics.
Figure 7 shows the anisotropy ratio on a logarithmic scale for all four flows. The anisotropy ratio grows monotonically in all four flows, confirming that the affine deformation continually drives the distribution away from isotropy. On the logarithmic scale the growth appears nearly linear in time for the vortex and bi-directional shear, suggesting approximately exponential anisotropy growth driven by the large spin components in those flows. Simple shear, by contrast, grows sub-exponentially: the nilpotent structure of () means grows only linearly, so at leading order rather than . The final ratios, normalized by simulation duration, give anisotropy growth rates of approximately 9.5 per unit time for the vortex, 4.9 for bi-directional shear, 3.9 for pressure shear, and 0.66 for simple shear. The vortex rate is roughly 19 times that of simple shear, consistent with the much larger spin components of the vortex ( vs. ) and the non-linear growth enabled by a non-nilpotent .

Figure 7. Anisotropy ratio vs. time on a logarithmic scale ( mesh, all four flows). All flows show monotonic growth; the vortex reaches the largest ratio (9.96 at ) despite the shortest simulation time.
Principal Axis Evolution
Figure 8 shows the evolution of the primary-plane principal axis angle, i.e., the (direction of the largest eigenvector of reported as a line direction in ), for all four flows on both meshes.
The rotation directions are flow-dependent and reflect the underlying kinematics of each flow. For simple shear and pressure shear, the principal axis rotates counter-clockwise (angle increasing toward ). Both flows have a single non-zero off-diagonal entry in in the primary plane ( and respectively), so the strain rate has its extensional eigenvector at in that plane. Starting from an isotropic initial condition, the distribution is immediately stretched toward and continues rotating counter-clockwise as the anisotropy grows.
For bi-directional shear the rotation is clockwise in the - plane (angle decreasing from ), despite the spin component which alone would drive counter-clockwise rotation. The reason is that the - shear coupling is stronger than the - coupling , and the full three-dimensional principal axis evolution projects as a net clockwise rotation when viewed in the - plane alone. This illustrates that the rotation direction in any individual plane cannot be inferred from the spin component in that plane alone when the flow has genuinely three-dimensional structure.
For the vortex the rotation is also clockwise (angle decreasing from ), here consistent with the dominant spin component in the - plane.
All four flows show strictly monotonic angle evolution throughout the simulation, confirming a unidirectional rotation of the principal axis of anisotropy in the primary plane. The and meshes agree to within at every time step, confirming mesh convergence of the principal axis direction.
We next compare the per-plane principal axis angles against the free-streaming prediction , obtained from the two covariance matrices and respectively. These quantities are defined as follows.
The numerical covariance is the covariance of the anisotropic Gaussian fitted to the FEM solution using the method explained in Appendix § 3.2. The free-streaming covariance is obtained in the collisionless limit:
by transporting the isotropic initial covariance under the affine deformation without considering collisions.
Applying (C2), as explained in Appendix § 3.3, to each covariance gives the numerical and free-streaming principal angles in the plane,
Both use only the three entries , , of the relevant subblock, so the comparison is planar and self-consistent. The scalar in eq. (5.1) rescales uniformly and therefore does not affect . The gap is defined as , and measures the rotation of the principal axis induced by collisions, relative to the free-streaming case.
Simple shear: - plane. Both the numerical data and the free-streaming prediction in Figure 9 show counter-clockwise rotation from to . The free-streaming prediction starts in good agreement ( at ) and diverges to at , due to the collision-induced retardation accumulating over multiple collision times.
Pressure shear: - plane. Agreement at is excellent () and the gap grows to by (Figure 9).
Bi-directional shear: all three planes. The - marginal angle shows non-monotonic behaviour (), rising slightly at before decreasing; the free-streaming prediction captures this correctly, and the gap remains below throughout (Figure 9). The - plane shows a growing gap () matching pressure shear at the same . The - plane passes through near-isotropy (axis flip between and ); the numerical results track this and the gap is equal and opposite in sign to that of -.
Vortex: all three planes. All three planes show sub- agreement at (). By the gaps reach , , and .
Discussion and Conclusions
Gaussian structure far from equilibrium
The central finding of this work is that the velocity distribution remains well-approximated by an anisotropic Gaussian throughout all simulated flows, even at strongly non-equilibrium conditions. The linear transport term in (2.10) preserves Gaussian structure exactly in the free-streaming limit: if is Gaussian then is also Gaussian, since composition with a linear map preserves the Gaussian form.
The finding that remains well-approximated by an anisotropic Gaussian throughout all simulated flows has important physical implications. The transport term drives it toward an anisotropic Gaussian in the free-streaming limit. The collision operator, by the -theorem, drives toward the isotropic Maxwellian. Their combined nonlinear interaction keeps near an anisotropic Gaussian throughout. For Maxwell molecules this near-Gaussian behavior can be understood theoretically via Bobylev’s Fourier-mode solutions [18, 19], which show that the Gaussian is exactly invariant under the Boltzmann operator for that kernel. For hard spheres, used in the present work, there is no analogous result exists, but the near-Gaussian structure observed here suggests this possibility. The quality of the approximation is quantified by the relative residual . All 16 data points across the four flows remain below 10%: Simple Shear 2.3–3.6%, Bi-directional Shear 2.1–5.9%, Vortex 2.4–7.1%, and Pressure Shear 2.3–9.1%. This accuracy is maintained at anisotropy ratios of up to 9.95 (Vortex, ) and 8.66 (Bi-directional Shear, ).
Because we solve the full Boltzmann collision integral without any moment closure assumption, the Gaussian structure is discovered from the dynamics rather than imposed by modeling; a standard BGK approximation, for instance, drives toward an isotropic Maxwellian by construction, and would suppress or diminish the anisotropic covariance structure observed here. Standard moment closures such as BGK assume a Maxwellian (single temperature) by construction; they cannot produce the anisotropic covariance structure or principal-axis rotation documented here. As a secondary implication, the near-Gaussian structure suggests that a tensorial temperature with as the state variable may be a useful starting point for developing reduced-order models of non-equilibrium flows. In kinetic theory the only stress is the thermal (kinetic) one, proportional to the second moment of the reduced peculiar velocity, since momentum is transported only by particle motion and not through inter-particle forces; we therefore refer to as the tensorial temperature, noting that it enters the energy balance (2.17) through the stress power because the thermal stress and the temperature tensor are the same object up to constant dimensional factors.
Comparison with molecular dynamics
As an additional validation, we compare the DG Boltzmann solution for simple shear directly against non-equilibrium molecular dynamics (NEMD) simulations carried out using LAMMPS [PIi95]. The LAMMPS simulations model a low-density Argon gas in a cubic box of side (where is the Lennard-Jones length parameter for Ar) using 10,000 and 100,000 particles. We approximate the hard-sphere potential by a truncated Lennard-Jones potential with no attraction. The same dimensionless shear rate is used in both simulations, with the mean free path expression used to match the dimensionless parameters between the two methods.
The DG solution and the LAMMPS simulation are qualitatively consistent: both show diagonal spreading of the distribution function in the - plane, confirming the development of anisotropy in the direction of the applied shear [27]. The initial condition is symmetric with respect to all three axes in both methods, and the evolved distributions show the same orientation of the principal axis of anisotropy. We emphasise that this is a deterministic solution of the Boltzmann equation: is represented on a velocity-space mesh and there are no simulation particles. The number density is a nondimensional quantity in scaled velocity units and not the number of particles.
Pressure-Shear: dilatation vs. shear competition
The pressure shear flow analysed in Section 5 uses and , in which the gas is compressed along () while being sheared in the - plane. This is the shear-dominated regime: the shear coupling is roughly six times the magnitude of the compression rate , and the resulting specific internal energy grows monotonically in agreement with the evolution equation derived in Section 2.B.
Pahlani et al. [67, 66], working in the molecular dynamics framework for the same class of affine flows, reported a qualitatively different regime in which the gas is expanded rather than compressed (, dilatation) while simultaneously sheared. In this regime they observe a competition between two effects: dilatation, which acts to lower the specific energy through expansion, and shear, which raises the specific energy by developing off-diagonal covariance components. The competition can produce a non-monotonic energy trajectory with a transient cooling phase followed by recovery once shear-induced anisotropy is sufficient to overpower the dilatation cooling.
To investigate whether the present DG Boltzmann solver reproduces the dilatation-vs-shear competition, we ran an additional simulation with
i.e. the same shear plane as the compressive pressure shear flow but with the diagonal entry flipped in sign and the shear component slightly reduced (). This choice produces , so the flow is expansive: the deformation gradient determinant is , and the analytically expected number density is . For this case the conservation routine of § 1.2 was modified to target the time-dependent value rather than the constant , as described in § 1.2.E, making the constraint consistent with the compressibility of the flow.
Figure 10 shows the simulated number density compared to the analytical prediction . The FEM solution tracks the prediction to within numerical precision throughout the simulated time range, confirming that the modified conservation routine correctly enforces the physically expected compressibility.
Figure 11 shows the specific internal energy computed three ways: the free-streaming prediction , the Gaussian-fitted DG energy , and the direct moment of the DG solution . All three curves exhibit a clear U-shape: the energy decreases from to a minimum near , then recovers as shear-induced off-diagonal covariance grows. This is precisely the dilatation-vs-shear competition described by Pahlani et al. [66].

Figure 11. Specific internal energy for the dilatative pressure shear flow (6.1). Solid line: free-streaming prediction . Open circles: Gaussian-fitted DG covariance . Open squares: direct DG moment . All three curves show the U-shape characteristic of the dilatation-vs-shear competition first observed by Pahlani et al. [66] in MD simulations.
A quantitative gap develops between and at later times, reflecting the velocity-domain truncation in the direct moment: the truncated domain loses contributions from the tails of the stretched distribution, while the Gaussian fit extrapolates beyond the domain to recover the full second moment.
The reduced energy evolution equation admits a natural decomposition into two physically distinct contributions:
where denotes the Hadamard product and extracts the diagonal part of . The dilatational term contracts the strain rate with the diagonal of the covariance and is non-zero from since ; the shear term contracts with the off-diagonal components of and is zero initially.
At , the diagonal contribution is , so and dilatation cooling dominates.
As develops a negative value under the positive shear , the off-diagonal contribution grows positive (since and ), overcoming the dilatation cooling. The crossover at marks the point at which the two contributions balance; beyond this time the shear heating dominates and the energy increases. The dilatation-vs-shear competition in pressure shear was previously known only from particle-based OMD simulations. The present DG solution reproduces this physics deterministically and provides a quantitative decomposition into the two competing contributions via (6.2). The agreement of the U-shape between and further shows that collisions reduce the late-time recovery rate but do not modify the existence of the energy minimum, demonstrating that the free-streaming mechanism remains the dominant feature of the energy evolution even under collisional dynamics.
Transient versus long-time behaviour
The anisotropic Gaussian behaviour characterized here describes the transient regime. For hard potentials, rigorous results establish that in the long-time, collision-dominated regime the distribution approaches an isotropic Maxwellian with growing temperature [47, 52, 32]. Our results are consistent with this picture: the isotropizing action of collisions is visible within the simulated window as the lag of the fitted principal-axis angle behind the free-streaming prediction (Figure 8) and as the departure of the specific energy from the free-streaming value (Figure 11), both of which vanish identically in the collisionless limit, where the exact covariance is . Reaching the collision-dominated regime numerically, with its unbounded temperature growth, is challenging since the fixed velocity domain bounds the reliable simulation window; a quantitative comparison of the collision and transport terms, and of the covariance growth rates against the power laws of [47, 52, 32], are important future directions.
We note finally that the unbounded temperature growth driving the asymptotic isotropization is specific to the idealized homoenergetic setting: in physical realizations, heat conduction (or a thermostat in molecular simulation) stabilizes the temperature, and steadily sheared states remain anisotropic [37]. The transient anisotropic regime characterized here is therefore relevant for numerous physically realistic situations wherein the temperature reaches a steady state.
Software and Data Availability. The DG solver code, the fitted-Gaussian results for all four flows, and the post-processing scripts are available at https://github.com/debnath2109/DG-Boltzmann-for-affine-flows. The raw simulation input files (G_INIT.dat as initial condition), precomputed Collision data, and the output files (gout.dat) are archived at doi.org/10.5281/zenodo.20518886.
Acknowledgments. We acknowledge Richard D. James for insightful comments; AFOSR (MURI FA9550-18-1-0095) and ARO (MURI W911NF-24-2-0184) for financial support; Air Force Research Laboratory for hosting Kaushik Dayal’s research visits; and NSF ACCESS for computing resources provided by Pittsburgh Supercomputing Center.
Reconstruction Algorithm
Given the DG nodal values , the reconstruction of on a uniform grid proceeds as follows.
Algorithm 1 DG reconstruction on grid
Set ,
Allocate initialised to zero
for each element do
Determine the range of grid indices covered by element
for each grid point in the element range do
Map to reference coordinates: ,
Evaluate
end for
end for
return
The reconstruction is exact (no quadrature error) at the grid points, since the DG polynomial is evaluated directly via the Lagrange formula.
Best-fit of the Reduced Velocity Distribution
At selected time steps, we fit the reduced velocity distribution to the anisotropic Gaussian form:
with seven free parameters : the 6 independent components of the symmetric positive-definite covariance matrix and the amplitude . The Levenberg–Marquardt algorithm [55, 58] is used to solve the nonlinear least-squares problem:
where is the grid.
To ensure positive definiteness of throughout the iteration, the covariance is parameterized via its Cholesky factorization , with the six lower-triangular entries of as the free parameters replacing the six components of .
The initial guess is (isotropic), , and the solution from the previous time step is used as a warm start for subsequent snapshots. Convergence is declared when the relative change in between Levenberg–Marquardt iterations falls below .
In-plane Principal Angle.
Let be a symmetric positive-definite covariance matrix and let be a coordinate plane, . The marginal distribution of , obtained by integrating the Gaussian over the third velocity component, is a planar Gaussian whose covariance is the subblock
Its iso-probability contours are ellipses, and the major axis of the ellipse is the in-plane direction of largest variance, i.e. the principal direction of the symmetric tensor . Let be the eigenvector associated with the larger eigenvalue of , with components and along the - and -axes. Measured from the -axis toward the -axis, and regarded as an undirected line, this direction makes the angle
References
References
- [5][AFM+14] K. Aikawa, A. Frisch, M. Mark, S. Baier, R. Grimm, J. L. Bohn, D. S. Jin, G. M. Bruun, and F. Ferlaino. Anisotropic relaxation dynamics in a dipolar fermi gas driven out of equilibrium. Phys. Rev. Lett., 113:263201, Dec 2014.DOI
- [7][AJ14] Alexander Alekseenko and Eswar Josyula. Deterministic solution of the spatially homogeneous boltzmann equation using discontinuous galerkin discretizations in the velocity space. Journal of Computational Physics, 272:170–188, 2014.DOI
- [8][Ale11] AM Alekseenko. Numerical properties of high order discrete velocity solutions to the bgk kinetic equation. Applied Numerical Mathematics, 61(4):410–427, 2011.DOI
- [9][ALPP00] Pierre Andries, Patrick Le Tallec, Jean-Philippe Perlat, and Benoit Perthame. The gaussian-bgk model of boltzmann equation with small prandtl number. European Journal of Mechanics - B/Fluids, 19(6):813–830, 2000.DOI
- [10]Ashcroft, N. W., & Mermin, N. D. (1976). Solid State Physics. In Holt, Rinehart and Winston.
- [11][ASB02] L. Acedo, A. Santos, and A. V. Bobylev. On the derivation of a high-velocity tail from the boltzmann–fokker–planck equation for shear flow. Journal of Statistical Physics, 109(5-6):1027–1050, December 2002.DOI
- [12][Bar06] Timothy J. Barth. On discontinuous Galerkin approximations of Boltzmann moment systems with Levermore closure. Computer Methods in Applied Mechanics and Engineering, 195(23-24):3311–3330, 2006.DOI
- [13][BGK54] P. L. Bhatnagar, E. P. Gross, and M. Krook. A model for collision processes in gases. I. Small amplitude processes in charged and neutral one-component systems. Physical Review, 94(3):511–525, 1954.DOI
- [14][BI89] Hans Babovsky and Reinhard Illner. A convergence proof for nanbu’s simulation method for the full boltzmann equation. SIAM Journal on Numerical Analysis, 26(1):45–65, 1989.DOI
- [15]Bird, G. A. (1994). Molecular gas dynamics and the direct simulation monte carlo of gas flows. In Clarendon, Oxford (Vol. 508, p. 128).
- [16][BJ14] John L. Bohn and Deborah S. Jin. Differential scattering and rethermalization in ultracold dipolar gases. Phys. Rev. A, 89:022702, Feb 2014.DOI
- [17][BNV20] A. V. Bobylev, A. Nota, and J. J. L. Velázquez. Self-similar asymptotics for a modified Maxwell–Boltzmann equation in systems subject to deformations. Commun. Math. Phys., 380:409–448, 2020.DOI
- [18][Bob76] A. V. Bobylev. Fourier transform method in the theory of the Boltzmann equation for Maxwellian molecules. Soviet Physics Doklady, 20:820–822, 1976.
- [19]Bobylev, A. V. (1977). A class of invariant solutions of the Boltzmann equation. Soviet Physics Doklady, 21, 632–634.
- [20][Bob84] A. V. Bobylev. Exact solutions of the nonlinear boltzmann equation and the theory of relaxation of a maxwellian gas. Theoretical and Mathematical Physics, 60(2):820–841, 1984. English translation of Teoreticheskaya i Matematicheskaya Fizika, 60(2), 280–310, 1984.DOI
- [21]Brilliantov, N. V., Spahn, F., Hertzsch, J., & Brilliantov, T. (2004). Kinetic Theory of Granular Gases. In Oxford University Press.
- [22]Chapman, S., & Cowling, T. G. (1970). The Mathematical Theory of Non-Uniform Gases. In Cambridge University Press.
- [23]Cercignani, C. (1975). Theory and application of the Boltzmann equation. In Scottish Academic Press.
- [24]Cercignani, C. (1988). The Boltzmann Equation and Its Applications. In Springer.
- [25][CHMR21] José Antonio Carrillo, Jingwei Hu, Zheng Ma, and Thomas Rey. Recent development in kinetic theory of granular materials: Analysis and numerical methods. In Trails in Kinetic Theory, volume 25 of SEMA SIMAI Springer Series. Springer, 2021.arxiv.org/abs/2001.11206
- [26][CRA11] Jonathan R. Clausen, Daniel A. Jr. Reasor, and Cyrus K. Aidun. The rheology and microstructure of concentrated non-colloidal suspensions of deformable capsules. Journal of Fluid Mechanics, 685:202–234, 2011.DOI
- [27][Deb18] Arnab Debnath. Numerical Solution of the Non-Equilibrium Boltzmann Equation Using the Discontinuous Galerkin Finite Element Method. PhD thesis, Carnegie Mellon University, Pittsburgh, PA, 2018.DOI
- [28]Dumitrică, T., & James, R. D. (2007). Objective molecular dynamics. Journal of Mechanics and Physics of Solids, 55(10), 2206–2236.
- [29][DJ10] Kaushik Dayal and Richard D James. Nonequilibrium molecular dynamics for bulk materials and nanostructures. Journal of the Mechanics and Physics of Solids, 58(2):145–163, 2010.DOI
- [30][DJ12] Kaushik Dayal and Richard D James. Design of viscosmeters corresponding to a universal molecular simulation method. Journal of Fluid Mechanics, 691:461–486, 2012.DOI
- [31][DL21] Renjun Duan and Shuangqian Liu. The boltzmann equation for uniform shear flow. Archive for Rational Mechanics and Analysis, 242(3):1947–2002, October 2021.DOI
- [32][DL25] Renjun Duan and Shuangqian Liu. Uniform shear flow via the Boltzmann equation with hard potentials. Discrete and Continuous Dynamical Systems, 45(10):4071–4118, 2025.arxiv.org/abs/2210.12340
- [33][DYP23] Tianqi Deng, Deren Yang, and Xiaodong Pi. Phonon-limited carrier mobilities and hall factors in 4h-sic from first principles. Physical Review B, 107:235203, 2023.DOI
- [34][FSJ+10] K. Falk, F. Seldmeier, L. Joly, R. R. Netz, and L. Bocquet. Molecular origin of fast water transport in carbon nanotube membranes: Superlubricity versus curvature dependent friction. Nano Letters, 10(10):4067–4073, 2010.DOI
- [35][GHHH17] I. M. Gamba, J. R. Haack, C. D. Hauck, and J. Hu. A fast spectral method for the Boltzmann collision operator with general collision kernels. SIAM J. Sci. Comput., 39(4):B658–B674, 2017.arxiv.org/abs/1610.00397
- [36][GLPL14] Stany Gallier, Elisabeth Elaber, François Peters, and Laurent Lobry. Rheology of sheared suspensions of rough frictional particles. Journal of Fluid Mechanics, 757:514–549, 2014.DOI
- [37][GS03] V. Garzó and A. Santos. Kinetic Theory of Gases in Shear Flows: Nonlinear Transport, volume 131 of Fundamental Theories of Physics. Kluwer Academic, Dordrecht, 2003.DOI
- [38][GT09] Irene M Gamba and Sri Harsha Tharkabhushanam. Spectral-lagrangian methods for collisional models of non-equilibrium statistical states. Journal of Computational Physics, 228(6):2012–2036, 2009.arxiv.org/abs/0710.5308
- [39]Gamba, I. M., & Tharkabhushanam, S. H. (2010). Shock and boundary structure formation by spectral-lagrangian methods for the inhomogeneous boltzmann transport equation. Journal of Computational Mathematics, 430–460.
- [40]Hairer, E., Nørsett, S. P., & Wanner, G. (1993). Solving Ordinary Differential Equations I: Nonstiff Problems. In Springer Series in Computational Mathematics (Vol. 8, Number 2nd rev. edition).
- [41][Hol66] Lowell H. Holway, Jr. New Statistical Models for Kinetic Theory: Methods of Construction. Physics of Fluids, 9(9):1658–1673, September 1966.DOI
- [42][HSA+09] Brian M. Haines, Andrey Sokolov, Igor S. Aranson, Leonid Berlyand, and Denis Karpeev. Three-dimensional model for the effective viscosity of bacterial suspensions. Physical Review E, 80(4):041922, 2009.pubmed.ncbi.nlm.nih.gov/19905357
- [43][HW07] Jan S. Hesthaven and Tim Warburton. Nodal Discontinuous Galerkin Methods: Algorithms, Analysis, and Applications, volume 54 of Texts in Applied Mathematics. Springer Science & Business Media, 2007.DOI
- [44][JAH19a] S. Jaiswal, A. A. Alexeenko, and J. Hu. A discontinuous Galerkin fast spectral method for the full Boltzmann equation with general collision kernels. J. Comput. Phys., 378:178–208, 2019.DOI
- [45][JAH19b] S. Jaiswal, A. A. Alexeenko, and J. Hu. A discontinuous Galerkin fast spectral method for the multi-species Boltzmann equation. Comput. Methods Appl. Mech. Engrg., 352:56–84, 2019.DOI
- [46][Jam06] Richard D James. Objective structures. Journal of the Mechanics and Physics of Solids, 54(11):2354–2390, 2006.DOI
- [47][JNV19a] R. D. James, A. Nota, and J. J. L. Velázquez. Long-time asymptotics for homoenergetic solutions of the Boltzmann equation: collision-dominated case. J. Nonlinear Sci., 29(5):1943–1973, 2019.DOI
- [48][JNV19b] Richard D James, Alessia Nota, and Juan JL Velázquez. Self-similar profiles for homoenergetic solutions of the boltzmann equation: particle velocity distribution and entropy. Archive for Rational Mechanics and Analysis, 231(2):787–843, 2019.DOI
- [49][JNV20] R. D. James, A. Nota, and J. J. L. Velázquez. Long-time asymptotics for homoenergetic solutions of the Boltzmann equation: hyperbolic-dominated case. Nonlinearity, 33(8):3781–3815, 2020.DOI
- [50][JQW24] R. D. James, K. Qi, and L. Wang. On the kinetic description of the objective molecular dynamics. Multiscale Model. Simul., 22(4):1646–1682, 2024.arxiv.org/abs/2307.16814
- [51][JS83] J. T. Jenkins and S. B. Savage. A theory for the rapid flow of identical, smooth, nearly elastic, spherical particles. Journal of Fluid Mechanics, 130:187–202, 1983.DOI
- [52][Kep24] Bernhard Kepka. Longtime behaviour of homoenergetic solutions in the collision dominated regime for hard potentials. Pure and Applied Analysis, 6(2):415–454, 2024.DOI
- [53][Lax54] P. D. Lax. Weak solutions of nonlinear hyperbolic equations and their numerical computation. Commun. Pure Appl. Math., 7(1):159–193, 1954.DOI
- [54][LE72] AW Lees and SF Edwards. The computer study of transport processes under extreme conditions. Journal of Physics C: Solid State Physics, 5(15):1921, 1972.DOI
- [55][Lev44] K. Levenberg. A method for the solution of certain non-linear problems in least squares. Q. Appl. Math., 2(2):164–168, 1944.DOI
- [56][Lev96] C. David Levermore. Moment closure hierarchies for kinetic theories. Journal of Statistical Physics, 83(5-6):1021–1065, 1996.DOI
- [57]Landau, L. D., & Lifshitz, E. M. (1981). Physical Kinetics. Course of Theoretical Physics, 10.
- [58][Mar63] D. W. Marquardt. An algorithm for least-squares estimation of nonlinear parameters. SIAM J. Appl. Math., 11(2):431–441, 1963.DOI
- [59][MCS+93] C. R. Monroe, E. A. Cornell, C. A. Sackett, C. J. Myatt, and C. E. Wieman. Measurement of cs-cs elastic scattering at t=30 μk. Phys. Rev. Lett., 70:414–417, Jan 1993.pubmed.ncbi.nlm.nih.gov/10054106
- [60][MNR16] Etele Molnár, Harri Niemi, and Dirk H. Rischke. Derivation of anisotropic dissipative fluid dynamics from the boltzmann equation. Phys. Rev. D, 93:114025, Jun 2016.DOI
- [61][MP06] Clément Mouhot and Lorenzo Pareschi. Fast algorithms for computing the boltzmann collision operator. Mathematics of Computation, 75(256):1833–1852, 2006.DOI
- [63][PPP24] George M. Petrov, Tzvetelina B. Petrova, and Joseph R. Peñano. Time-dependent electron boltzmann equation for hypersonic plasmas. Physics of Plasmas, 31(7):073514, 2024.DOI
- [64][PR00a] Lorenzo Pareschi and Giovanni Russo. Numerical solution of the boltzmann equation i: Spectrally accurate approximation of the collision operator. SIAM journal on numerical analysis, 37(4):1217–1245, 2000.DOI
- [65]Pareschi, L., & Russo, G. (2000). On the stability of spectral methods for the homogeneous boltzmann equation. Transport Theory and Statistical Physics, 29(3-5), 431–447.
- [66][PSJ23a] G. Pahlani, T. E. Schwartzentuber, and R. D. James. A constitutive relation generalizing the Navier–Stokes theory to high-rate regimes. J. Fluid Mech., 974:A30, 2023.DOI
- [67][PSJ23b] G. Pahlani, T. E. Schwartzentuber, and R. D. James. Objective molecular dynamics for atomistic simulation of macroscopic fluid motion. J. Comput. Phys., 478:111938, 2023.DOI
- [68][PTSJ23] G. Pahlani, E. Torres, T. E. Schwartzentuber, and R. D. James. Objective molecular dynamics investigation of dissociation and recombination kinetics in high-temperature nitrogen. Phys. Fluids, 35(6):067111, 2023.DOI
- [69][RMD19a] Eilis Rosenbaum, Mehrdad Massoudi, and Kaushik Dayal. Effects of polydispersity on structuring and rheology in flowing suspensions. Journal of Applied Mechanics, 86(8):081001, 2019.DOI
- [70][RMD19b] Eilis Rosenbaum, Mehrdad Massoudi, and Kaushik Dayal. Surfactant stabilized bubbles flowing in a newtonian fluid. Mathematics and Mechanics of Solids, 24(12):3823–3842, 2019.DOI
- [71]Roache, P. J. (2002). Code Verification by the Method of Manufactured Solutions (Vol. 124).
- [72][San11] Andrés Santos. A bhatnagar–gross–krook-like model kinetic equation for a granular gas of inelastic rough hard spheres. In 27th International Symposium on Rarefied Gas Dynamics, volume 1333 of AIP Conference Proceedings, pages 41–48. American Institute of Physics, 2011.DOI
- [73][SB16] Thomas E. Schwartzenruber and Iain D. Boyd. Nonequilibrium Gas Dynamics and Molecular Simulation. Cambridge University Press, 2016.DOI
- [74][SJ18] Marcello Sega and Pál Jedlovszky. The impact of tensorial temperature on equilibrium thermodynamics. *Phys. Chem. Chem. Phys.*, 20:16910–16912, 2018.DOI
- [75][SRO93] M. Syamlal, W. Rogers, and T. J. O’Brien. MFIX documentation theory guide. Technical Report DOE/METC-94/1004, U.S. Department of Energy, Morgantown Energy Technology Center, December 1993.DOI
- [76]Truesdell, C., & Muncaster, R. (1980). Fundamentals of maxwell’s kinetic theory of a simple monatomic gas.
- [77][TR90] Peter A. Thompson and Mark O. Robbins. Shear flow near solids: Epitaxial order and flow boundary conditions. *Phys. Rev. A*, 41:6830–6837, Jun 1990.pubmed.ncbi.nlm.nih.gov/9903096
- [78][Wag92] Wolfgang Wagner. A convergence proof for bird’s direct simulation monte carlo method for the boltzmann equation. *Journal of Statistical Physics*, 66(3–4):1011–1044, 1992.DOI
- [79][WB21] Reuben R. W. Wang and John L. Bohn. Anisotropic thermalization of dilute dipolar gases. *Physical Review A*, 103(6), 2021.DOI
- [80][ZG18] C. Zhang and I. M. Gamba. A conservative discontinuous Galerkin solver for the space-homogeneous Boltzmann equation for binary interactions. *SIAM J. Numer. Anal.*, 56(5):3040–3070, 2018.DOI
- [81][Zim60] J.M. Ziman. *Electrons and Phonons: The Theory of Transport Phenomena in Solids*. International series of monographs on physics. Clarendon Press, 1960.DOI