WorksEngineering
Structured PARAFAC Channel Estimation for Flexible Intelligent Metasurface Receivers
Abstract
Flexible intelligent metasurfaces (FIMs) create geometric diversity through aperture morphing, but their configuration-dependent responses complicate uplink channel estimation. This letter considers multiple users sharing a common angular response and develops a structured PARAFAC model across calibrated FIM configurations. Its known identity factor and rank-one pilot-weighted channel factor enable deterministic, noniterative algebraic factor recovery through per-element rank-one approximations, reference-state normalization, global rank-one projection, and a least-squares morphing-factor update. The recovered spatial and morphing factors are then jointly matched to the calibrated manifold to estimate the common angles, user gains, and configuration-dependent channels. Simulations demonstrate accurate recovery and show that out-of-plane morphing resolves the azimuth-sign ambiguity of an undeformed planar aperture; an angular-spread experiment quantifies the mismatch when the common-response assumption is relaxed.
Introduction
FLEXIBLE intelligent metasurfaces (FIMs) introduce controllable geometric degrees of freedom by adjusting the positions of their constituent elements, thereby reshaping the effective aperture and modifying the spatial response [1, 2]. This geometric reconfigurability provides additional propagation and spatial-diversity opportunities, but it also complicates channel acquisition because the array response varies with the adopted morphing configuration. Accurate channel estimation must therefore account for the coupling between the underlying propagation parameters and the prescribed FIM geometry.
Recent studies have investigated channel estimation for FIM and related geometry-reconfigurable architectures. Sparse angular recovery with FIM-shape optimization was considered in [3], while model-based interpolation, kernel methods, sparse parametric recovery, and neural-operator learning were studied in [4]. For movable-antenna MIMO systems, tensor decomposition was employed to exploit measurements collected over antenna movements [5], and an alternating-least-squares PARAFAC formulation was introduced for point-to-point MIMO systems equipped with morphing FIM arrays [6]. Tensor-based receiver designs have been investigated in UAV-aided MIMO systems, including information monitoring receivers [7]. Tensor-based channel estimation has also been widely explored in systems incorporating reconfigurable intelligent surfaces (RISs) [9, 10], including PARAFAC models for RIS-assisted multiple-input multiple-output (MIMO) systems [12, 11] and low-rank tensor recovery for RIS-assisted millimeter-wave orthogonal frequency division multiplexing (OFDM) [13]. For multi-RIS uplink MIMO systems, a PARATUCK2-based framework was developed for joint channel and symbol estimation, followed by subspace-based geometric parameter extraction [14]. Structured tensor factorizations have also been investigated for beyond-diagonal RIS architectures [15]. These studies establish the value of tensor modeling, while motivating estimators that explicitly exploit the structure of multiuser uplinks observed across calibrated morphing states.
To address this need, we study uplink channel estimation for multiple users observed over prescribed, calibrated FIM morphing configurations. We focus on the common-angular-response regime, in which users share a dominant arrival direction as seen by the FIM; this model also approximates compact user clusters unresolved by the effective aperture. Relative to the ALS-based point-to-point FIM-PARAFAC formulation in [6], we target the multiuser uplink and exploit the structure it induces: the known identity factor decouples the model unfolding into per-element rank-one matrix approximations, while the pilot-weighted channel factor obeys a global rank-one constraint. We use these properties for reference-state normalization, global rank-one projection, and a single least-squares morphing-factor refinement, avoiding alternating PARAFAC updates. We then jointly match the recovered spatial and morphing factors to the calibrated FIM manifold to estimate the common angles, user gains, and configuration-dependent channels. Simulations demonstrate accurate factor recovery and show how morphing resolves the azimuth-sign ambiguity inherent to the undeformed planar aperture. A
This work was supported in part by the National Key Research and Development Program of China under Grant 2024YFE0200103, the China Scholarship Council (Grant No. 202508110189), the NSFC under Grant 62001008, and the Beijing Municipal Natural Science Foundation under Grants 4212002 and L192034. This work is partially supported by the National Institute of Science and Technology (INCT-SigNals) sponsored by Brazil’s National Council for Scientific and Technological Development (CNPq) (406517/2022-3), and FUNCAP (INCT-25255-82587.32.41/64). The research of André L. F. de Almeida is partially supported by CNPq (303356/2025-1). nonzero-angular-spread experiment additionally quantifies the model mismatch as this assumption is relaxed.
System Model and FIM-PARAFAC Formulation
Multi-Morphing Uplink Model
As illustrated in Figure 1, we consider a narrowband block-fading uplink with single-antenna users and an -element FIM receiver. In the undeformed reference state, the elements form a planar array in the -plane, indexed by , with and . During training, the FIM cycles through prescribed, calibrated morphing configurations. Element positions remain fixed along and and vary only along ; thus, the position of element in configuration is , where is the element’s out-of-plane displacement. The displacement profile of the th configuration is collected as .

Figure 1. FIM-assisted uplink training and structured PARAFAC formulation.
Consider a far-field plane wave with elevation angle and azimuth angle , with unit direction vector . Let denote the carrier wavelength and the wavenumber. The response of the th FIM element under the th morphing configuration is . Let the undeformed UPA steering vector be , and the morphing-induced phase vector be , where the exponential is applied elementwise. The complete FIM steering vector is therefore . The first morphing configuration is selected as the undeformed reference state, i.e.,
During uplink training, user transmits a known pilot sequence , and all pilot sequences are collected in . Let denote the complex channel gain of user , and let denote its angular parameters. Under the single-dominant-path model, the channel between user and the FIM under configuration is . The received pilot matrix under the th morphing configuration is therefore
where denotes additive noise.
In this work, we focus on the angularly co-located-user configuration, for which and for . This condition applies exactly to users sharing the same dominant arrival direction and also serves as a nominal model for a compact user cluster that the effective FIM aperture cannot resolve. Let , , and . Define the pilot-weighted channel gain vector as . The signal model in (2) is equivalent to
Structured FIM-PARAFAC Representation
The received matrices are stacked along the morphing configuration dimension to construct the third-order observation tensor , with . Its three modes correspond to the FIM elements, pilot symbols, and morphing configurations, respectively.
Define
and collect the morphing responses in . Since the first configuration is undeformed, the reference condition in (1) gives .
Let denote the third-order identity tensor. Substituting (3) into the stacked observations gives the structured PARAFAC model
where is the stacked noise tensor. The factors are therefore , , and , with a known identity factor and the global rank-one constraint on in (4). Under the adopted unfolding convention, its mode-1 unfolding is . Here, denotes the Khatri–Rao product. Transposing this relation and defining gives
The known identity factor and the columnwise structure of (6) enable the deterministic closed-form factorization developed in the next section.
Proposed Structured FIM-PARAFAC Estimator
Columnwise Rank-One Factorization
Starting from the mode-1 representation in (6), let
Denote by and the th columns of and , respectively. Since the Khatri–Rao product operates columnwise, the th column of (7) satisfies
Using , can be reshaped into
where denotes the corresponding reshaped noise matrix. Hence, the structured tensor factorization is reduced to separate, algebraically decoupled rank-one matrix approximation problems. This decoupling is algebraic and does not, by itself, imply statistical independence of the noise terms.
Let
be the singular value decomposition of , and let denote its dominant singular triplet. A compatible pair of unnormalized factor estimates is
The complex conjugation in (11) follows from the transpose in . The SVD factors in (11) give the unweighted Frobenius-norm best rank-one approximation of each reshaped observation, , with squared residual . The minimizer is unique when its dominant singular value is simple, although its factor pair retains a reciprocal scalar ambiguity. Such an unweighted least-squares fit corresponds to a maximum-likelihood estimate only under an i.i.d. white Gaussian noise model. The two factors in (11) are subject to a reciprocal scaling ambiguity. This ambiguity is resolved by the undeformed reference configuration in (1), which implies . Defining
the normalized estimates are obtained as
Under the exact model, because the first entry of each morphing-factor column equals one. With noise, remains a necessary nondegeneracy condition, and a small makes this reference-state normalization ill-conditioned.
Collecting the normalized column estimates yields
Global Rank-One Projection and Factor Refinement
Since the matrices are approximated separately, their assembled estimate will generally not satisfy the global physical constraint in noise. We therefore enforce the common angular-response structure by
where denotes the best rank-one approximation in the Frobenius-norm sense. Specifically, if is a dominant singular triplet of , then
This projection is the nearest rank-one matrix to the assembled factor. The subsequent update is a single conditional refinement. For fixed , define the mode-3 design matrix
The columns of have disjoint support, which gives
Here, denotes the th column of . Thus, if every such column is nonzero, has full row rank and the unconstrained LS estimate of the morphing factor is unique:
This is ordinary, unweighted conditional least squares (and is conditionally maximum likelihood under i.i.d. white Gaussian noise). Define , the final closed-form factor estimates are then
Provided every diagonal entry of is nonzero, this diagonal rescaling enforces the reference-state constraint without changing the fitted tensor:
In noisy data, small diagonal entries likewise make this normalization ill-conditioned and should be treated as a degenerate estimate. Consequently,
The algebraic factor recovery stage is deterministic and noniterative. Its main operations are independent dominant singular vector computations, one global rank-one projection, and one structured least-squares update; physical angle extraction is subsequently performed by the manifold-matching step.
Remark 1 (Recoverability and complexity): The proposed estimator does not rely on generic Kruskal-rank uniqueness. Since the known identity factor decouples the mode-1 unfolding into rank-one factorizations , their scalar ambiguities are removed by the reference condition . Recovery of further requires , i.e., . For algebraic factor recovery, the main cost is computing the leading singular triplet of each of the matrices of size , with complexity . This is followed by one global rank-one projection and one structured least-squares refinement; the stated complexity excludes the subsequent angular-manifold search.
Physical Parameter and Channel Recovery
After estimating the algebraic factors and , the physical channel parameters can be recovered by exploiting the rank-one structure . Let , and denote its dominant singular triplet by . A compatible pair of estimates is
Algorithm 1 Closed-Form FIM-PARAFAC Estimator
Require: ,
Ensure: , , ,
Form .
for do
Reshape into and compute its dominant singular triplet.
Obtain and from (11).
Normalize the pair using (13).
end for
Form and apply .
Recover using (24).
Estimate using (26).
A residual scalar ambiguity remains between and . Since the first element of the reference UPA steering vector is , define . The reference-normalized estimates are and . The individual user gains are then recovered from the known pilot matrix as
Unique recovery of the user gains requires , and . Finally, the common angular parameters are extracted by jointly matching the recovered spatial and morphing factors to the calibrated FIM manifold. Defining
the angular estimate is obtained from
where denotes the admissible angular region and controls the contribution of the morphing factor. The channel of user under the th morphing configuration is finally reconstructed as
Simulation Results
We consider an FIM with elements, where and with . Unless otherwise stated, , , and , and all users share the common angular pair . The channel gains follow , while the nonreference element displacements are independently drawn from . Deterministic DFT pilots satisfying are employed, and all results are averaged over realizations. For each realization, the noise variance is set as , where . The NMSE is averaged over all Monte Carlo realizations and reported in dB. The joint angular RMSE is
where is wrapped to . For a fair comparison, the equal-overhead rigid-panel LS baseline uses pilots under the undeformed configuration, with .
Estimation and Angular-Recovery Performance
Figure 2(a) compares the normalized mean squared error (NMSE) of the equivalent rank-one matrix . The proposed structured estimator improves as SNR increases, whereas the morphing-averaged singular value decomposition (SVD) exhibits an error floor because it does not account for configuration-dependent phase responses. The oracle LS curve serves as a lower bound. At equal pilot-symbol overhead, the rigid-panel LS attains lower H-NMSE because all pilots observe the same fixed spatial response and thus provide greater noise averaging. The proposed method instead distributes those pilots across multiple morphing configurations and estimates the morphing-dependent factor jointly. This tradeoff highlights the distinct benefit of morphing thanks to improved angular identifiability. Figure 2(b) demonstrates the value of morphing diversity for physical-angle recovery. The proposed estimator’s angular root mean square error (RMSE) decreases with SNR, whereas the rigid-panel LS retains an error floor of approximately . For the undeformed --plane array, , so the sign of is unidentifiable. With , the indistinguishable solution incurs a azimuth error and, under the joint RMSE definition in (28), yields approximately . Out-of-plane morphing adds a phase dependence on , breaking this ambiguity through joint spatial–morphing manifold matching.

Figure 2. Performance versus SNR for , , , and : (a) NMSE of ; (b) joint angular RMSE.
Impact of Morphing Diversity and Model Mismatch
Figure 3a shows that the NMSE of decreases as grows, since additional calibrated configurations provide more observations for structured factor recovery. The gains diminish at larger . The closed-form and projected alternating estimators perform nearly identically under the matched common angular-response model, indicating that the noniterative factor-recovery stage captures most of the available benefit. Because each configuration uses pilot symbols, increasing also increases the total training overhead in this experiment.
Figure 3. Impact of morphing diversity and angular spread: (a) NMSE of versus at SNR = 15 dB; (b) noise-free common-angular-response model mismatch versus angular-spread half-width.
Figure 3b assesses the common angular-response model under nonzero angular spread. It plots the normalized, noise-free residual between the true multiuser observation tensor and its best structured common-angle PARAFAC approximation. At zero spread, all users share the same spatial and morphing responses, so the residual approaches numerical precision. As the spread grows, user-dependent responses cannot be represented by the single rank-one factor , and the irreducible model mismatch increases. This experiment therefore indicates the regime in which the proposed formulation is appropriate: users with a shared dominant direction or a sufficiently compact angular cluster.
Conclusion
This letter introduced a structure-aware PARAFAC estimator for multiuser uplink channel estimation across calibrated FIM morphing configurations under a common-angular-response model. The estimator exploits the known identity factor, the global rank-one pilot-weighted channel structure, and the undeformed reference state to recover the algebraic factors deterministically without alternating updates; calibrated-manifold matching then yields the common angles, user gains, and configuration-dependent channels. Simulations demonstrate accurate factor recovery, show that out-of-plane
morphing resolves the azimuth-sign ambiguity of an undeformed planar aperture, and quantify the model mismatch that arises with nonzero angular spread.
References
- [1]J. An, C. Yuen, M. Di Renzo, M. Debbah, H. V. Poor, and L. Hanzo, “Flexible intelligent metasurfaces for downlink multiuser MISO communications,” IEEE Trans. Wireless Commun., vol. 24, no. 4, pp. 2940–2955, 2025.DOI
- [2]J. An, Z. Han, D. Niyato, M. Debbah, C. Yuen, and L. Hanzo, “Flexible intelligent metasurfaces for enhancing MIMO communications,” IEEE Trans. Commun., vol. 73, no. 9, pp. 7349–7365, 2025.arxiv.org/abs/2502.16478
- [3]J. Jiang, J. An, L. Gan, N. Al-Dhahir, A. Nallanathan, and Z. Han, “Enhanced channel estimation for flexible intelligent metasurface-aided communication systems,” IEEE Trans. Veh. Technol., vol. 75, no. 6, pp. 11 698–11 703, 2026.DOI
- [4]J. Xiao, J. Wang, Q. Cui, Y. Yang, X. Li, D. Niyato, and C. Yuen, “Channel estimation for flexible intelligent metasurfaces: From model-based approaches to neural operators,” IEEE Trans. Wireless Commun., vol. 25, no. 10,684–10 701, 2026.DOI
- [5]R. Zhang, L. Cheng, W. Zhang, X. Guan, Y. Cai, W. Wu, and R. Zhang, “Channel estimation for movable-antenna MIMO systems via tensor decomposition,” IEEE Wireless Commun. Lett., vol. 13, no. 11, pp. 3089–3093, 2024.DOI
- [6]V. L. Romano, A. L. de Almeida, and D. C. Araújo, “Channel estimation for flexible intelligent metasurface aided MIMO communications,” arXiv:2605.29227, 2026.arxiv.org/abs/2605.29227
- [7]X. Han, X. Zhao, J. Ying, and F. Gao, “Tensor-based information monitoring receiver in UAV-aided MIMO communication systems,” IEEE Wireless Commun. Lett., vol. 11, no. 1, pp. 155–159, 2022.DOI
- [9]G. T. de Araújo, A. L. F. de Almeida and R. Boyer, “Channel Estimation for Intelligent Reflecting Surface Assisted MIMO Systems: A Tensor Modeling Approach,” IEEE Journal of Selected Topics in Signal Processing, vol. 15, no. 3, pp. 789–802, 2021.DOI
- [10]K. Ardah, S. Geheshkho, A. L. F. de Almeida, and M. Haardt, “TRICE: A channel estimation framework for RIS-Aided millimeter-wave MIMO systems,” IEEE Signal Process. Lett., vol. 28, pp. 513–517, 2021.DOI
- [11]Y. Cao, C. Xing, N. Wei, S. Gong, N. Zhao, and D. Niyato, “Tensor-based joint channel estimation and activity detection for reconfigurable intelligent surface-assisted massive connectivity,” IEEE Trans. Commun., vol. 73, no. 11, pp. 11 870–11 885, 2025.DOI
- [12]L. Wei, C. Huang, G. C. Alexandropoulos, C. Yuen, Z. Zhang, and M. Debbah, “Channel estimation for RIS-empowered multi-user MISO wireless communications,” IEEE Trans. Commun., vol. 69, no. 6, pp. 4144–4157, 2021.DOI
- [13]X. Zheng, P. Wang, J. Fang, and H. Li, “Compressed channel estimation for IRS-assisted millimeter wave OFDM systems: A low-rank tensor decomposition-based approach,” IEEE Wireless Commun. Lett., vol. 11, no. 6, pp. 1258–1262, 2022.arxiv.org/abs/2203.16164
- [14]X. Han, P. Li, J. Ying, F. Gao, and C. Yuen, “Tensor-based joint channel and symbol estimation with subspace-based parameter extraction for multi-RIS uplink MIMO systems,” IEEE Trans. Commun., vol. 74, pp. 7271–7284, 2026.DOI
- [15]A. L. F. de Almeida, B. Sokal, H. Li, and B. Clerckx, “Channel estimation for beyond diagonal RIS via tensor decomposition,” IEEE Trans. Signal Process., vol. 73, pp. 4744–4779, 2025.
