WorksPhysics and Astronomy
Strain tunable anomalous Hall and Nernst conductivities in compensated ferrimagnetic MnAl
Abstract
The tunability of anomalous Hall and Nernst conductivities is investigated in the compensated ferrimagnet MnAl under isotropic strain () and chemical potential variation using first-principles calculations. At a chemical potential of eV, three distinct topological features – Weyl points, nodal lines, and gapped nodal lines – are simultaneously realized along high-symmetry directions of the Brillouin zone in the framework of magnetic space group. The anomalous Hall conductivity (AHC) is found to be predominantly governed by the Berry curvature in the plane and can be enhanced significantly under tensile strain, reaching . On the other hand, the anomalous Nernst conductivity (ANC) shows a sign change near the Fermi level and whose magnitude increases at eV with quasi-quadratic strain dependence. Regardless of strain, the underlying bands and Fermi surface structures remain robust, while the distribution and magnitude of Berry curvature evolve substantially. These results underscore the potential of MnAl, a compensated ferrimagnet, as a platform for Berry curvature engineering via strain and doping.
Introduction
In modern spintronics, the role of the anomalous Hall effect (AHE) and anomalous Nernst effect (ANE) are increasing, by providing an efficient mechanism to generate transverse charge and spin current without relying on external magnetic fields [1, 2, 3]. Both AHE and ANE arise from the interplay of topology of electronic structure, spin-orbit coupling, and broken time-reversal symmetry [4, 5, 6, 7, 8]. The intrinsic origins of AHE and ANE are now widely understood in terms of the Berry curvature of electronic bands, with topological features such as Weyl points and nodal lines playing crucial roles [4, 9, 10].
In recent years, compensated ferrimagnets and some antiferromagnets, with vanishing net magnetization, have emerged as promising hosts of large AHE and ANE, combining broken time-reversal symmetry with vanishing net magnetization [6, 8, 11, 12, 13, 14, 15]. The vanishing net magnetization is advantageous for overcoming stray fields while still supporting a robust Berry curvature. In particular, Heusler compounds are versatile owing to tunable crystal structures, rich magnetic phase diagrams, and compatibility with spintronic technologies [16, 17, 18]. Such flexibility makes Heusler compounds excellent platforms for studying and engineering topological transport properties.
A representative example is , a compensated collinear ferrimagnet in a cubic Heusler, with half-metallicity and Curie temperature of 605 K [19]. The magnetic symmetry of allows a nonzero anomalous Hall conductivity despite zero net magnetization [20, 21]. Previous studies have identified its intrinsic AHE, associated with symmetry-protected Berry curvature hot spots [20]. However, how this anomalous response evolves under external tuning—such as isotropic strain or chemical potential variation—has not been fully clarified. Moreover, the possible coexistence of multiple topological features under such conditions has remained unexplored.
In this work, we employ first-principles calculations to reveal that simultaneously hosts Weyl points, nodal lines, and gapped nodal lines around a chemical potential of eV, located along high-symmetry directions of its magnetic Brillouin zone. These topological features give rise to strongly strain-dependent variations in both anomalous Hall and Nernst conductivities. Our findings suggest that compensated Heusler ferrimagnets provide a promising host for Berry-curvature engineering of spintronic devices [22, 23, 24, 25, 26, 27, 28, 29, 30, 31]. Such engineering has already been demonstrated under hydrostatic pressure [27, 28, 29] and via chemical potential variation [30, 31].
Structure and magnetic space group
Crystal structure of a regular Heusler compound, , in structure is depicted in Figure 1 (a), whose space group is (No. 225). It can be viewed as a superposition of two of Al and Mn(I) with Mn(II) locating at the center of cubic box formed by Mn(I) and Al (denoted by green lines). Site symmetry of constituent atoms are for Al, for Mn(I), and for Mn(II), respectively. Different site symmetry results in distinct magnetic moments of Mn(I) and Mn(II). While Al has negligible moment, moment of Mn(I) is and that of Mn(II) is , respectively.

Figure 1. (a) Crystal structure of MnAl with magnetization along [1]. Mn(I), Mn(II), and Al are in blue, red, and gray spheres, respectively, with magnetic moments shown in arrows. Green line denotes cube formed by Mn(I) and Al, where Mn(II) is at the center of the cube. (b) Brillouin zone of MnAl of magnetic space group (No. 139.537). High symmetry points, symmetrically equivalent in space group but distinct in magnetic space group, are distinguished by colors.
Brillouin zone of is shown in Figure 1 (b) with labels for high symmetry points. For , high-symmetry points shown in blue (, , ) and red are equivalent. They are inequivalent in the presence of magnetization along axis, whose magnetic space group is (No. 139.537). Under 4-fold rotation along axis, , the crystal structure is invariant. On the other hand, the fourfold rotation around the axis leaves the chemical structure invariant but alters the magnetic structure. Hence, is the symmetry operation of magnetic space group, (No. 139.537), but is not. In this context, has 4-fold rotational symmetry while has no such in (No. 139.537).
Methods of Calculations
First-principles calculations are performed using Vienna ab initio simulation package (VASP) with spin-orbit coupling included[32]. For the exchange-correlation energy, generalized gradient approximation (GGA) is used with Perdew-Burke-Erzerhof (PBE) parameterization [33]. Summation in Brillouin zone is done with grid. Cutoff energy for wave function expansion is 450 eV. Optimized lattice constant is 5.78 Å in good agreement with experiment [19].
After self-consistent calculations, maximally-localized Wannier functions (MLWFs) are obtained using Wannier90 [34, 35] with grid. The initial projections were chosen using orbitals for Mn and and for Al atoms. 38 maximally-localized Wannier functions (MLWFs) are constructed from 72 Bloch bands. Berry curvature is computed using WannierBerri [36] via Wannier interpolation with grid.
Anomalous Hall conductivity (AHC) is obtained by summing up Berry curvature, , over occupied states in Brillouin zone[11],
where is the elementary charge; is the Fermi-Dirac distribution of -th band of . The Berry curvature is obtained from Kubo formula,
where is the velocity operator of -th component; is energy of -th band of .
Anomalous Nernst conductivity (ANC) is expressed in terms of Berry curvature[9],
Here is the entropy of fermion,
where is the Boltzmann constant. In the low temperature limit, ANC is commonly expressed by Mott relation, . This limit represents the Berry curvature contribution on the Fermi surface[9, 20].
Results and Discussions
Band crossing and Nodal line
Band structure of MnAl without strain is shown in Figure 2. Red (blue) of bands represent the amplitude of resolved Berry curvature with positive (negative) sign. In Figure 2 (a), color-labeled high symmetry points are classified as crossing, Weyl points, and avoided crossing, respectively. MnAl is half-metallic with band gap 0.4 eV in the minority spin channel. This half-metallicity is robust with strain [37]. Around , large emerges with alternating signs. More dominant is evident near : while bands around eV have both signs, rather dispersive band crossing around has large contribution. around has also pronounced contribution near with both signs.

Figure 2. (a) projected Berry curvature of Mn₃Al without strain. Symmetrically distinct points are distinguished by colors in black, blue, and red. Shade boxes denote: crossing (in yellow) and avoided crossing (in blue). Crossing are further classified into crossing and Weyl points (see text). (b) (001) plane in Brillouin zone containing , where crossing is denoted in yellow box. (c) (100) plane in Brillouin zone containing and , which are Weyl point and avoided crossing, respectively. In insets of (b) and (c), group of and representation of bands are shown, where color of bands are resolved Berry curvature.
Figure 2 (b-c) show enlarged views of colored boxes of Figure 2 (a). Brillouin zone with (001) and (100) plane are shown respectively, which contain paths of our interest. Band analysis along is shown in Figure 2 (b); that along and is in Figure 2 (c). Little groups with corresponding representations are on top along color-coded Berry curvature.
Along , band crossing of and states are evident, where (001) is the mirror plane containing . Along , the band crossing of and is Weyl point, where (100) is not a mirror plane when the magnetization is along (001). On the other hand, the path along , the (100) plane not being a mirror plane results in avoided crossing of and , where positive and negative Berry curvature is apparent above and below the gap. From this symmetry analysis, Mn₃Al contains band crossing, Weyl point, and avoided crossing when eV [38].
Anomalous Hall and Nernst Conductivity
Figure 3 presents the anomalous Hall () and the Nernst conductivity (). In Figure 3 (a-b), and are presented as function of strain () and the chemical potential () in color contour, where bright color correspond large . Solid (dashed) lines denote ( eV), where K is used. For , bright yellow region appears for just above , which rather monotonically shifts to positive strain with . Bright area is most pronounced for positive strains when eV.

Figure 3. (a) Anomalous Hall conductivity () and (b) anomalous Nernst conductivity () as function of strain and chemical potential in color contour. Solid and dashed lines correspond to and eV, respectively. (c) and (d) with respect to strain for (solid line with filled symbol) and eV (dashed line with open symbols), respectively.
For , positive (negative) values are denoted by red (blue) colors. As seen, when , both positive and negative appear with strain. Without strain , which becomes largest with 830 for ; while around eV is large around 2.92 (A/K m) with negative sign.
To reveal clear strain dependence, and are plotted in Figure 3 (c-d) as function of strain, for two chemical potentials, and eV, denoted by solid and open symbols, respectively. First, AHC is plotted in Figure 3 (c). When , , is in the range of . For , is largest with -800 . When eV, on the other hand, exhibits clear tendency of monotonic decrease, or increase of magnitude, which reaches as high as −1100 for . Second, ANC is plotted in Figure 3 (d). When , is negative for compressive strain turning positive for . It becomes negative for . reaches 2.17 and
1.73 (A/K m) for and . The sign change of , as expressed in Eq. (3), is a manifest of sign of over all Berry curvature with strain. When eV, exhibits quasi-quadratic feature with local minimum (A/K m) near zero strain [39].
Fermiology: and eV
As discussed earlier, AHC and ANC exhibit differently for and eV. When , the Berry curvature is maximized without strain both on and planes. With compressive strain, the magnitude of AHC is reduced with positive Berry curvature. With tensile strain, AHC is reduced with the smaller magnitude of Berry curvature in narrow region. When eV, Berry curvature is dominantly from plane. The magnitude of Berry curvature increases with strain. Here, the evolution of Fermi surface (FS) with respect to strain is discussed with concomitant distribution of Berry curvature for each . Figure 4 and Figure 5 show Berry curvature distribution with FS contour on and planes, whose bands structures are presented in Figure 2 (b) and Figure 2 (c). With SOC, FS on and planes are quite similar but different, which are equivalent without SOC. FS sheets are labelled as , , , and for . Primes are used to for contours when eV. In the following, aforementioned discussion is presented for , 0, and +5%. Cases for other strains are shown in Supplemental Material [40].

Figure 4. Contour of Berry curvature when for , 0, and +5% from left to right column. Upper panel: on plane (001) and lower panel: contour on plane (100). Red (blue) color denotes positive (negative) . Yellow line is for Brillouin zone boundary. Fermi surface is shown in black lines, where individual Fermi sheets are labeled by , , , and . High symmetry point labeled in black, red, and blue are consistent with Figure 2.

Figure 5. Contour of Berry curvature when eV for , 0, and +5%. Upper panel: near the plane (001) and lower panel: contour on plane (100). Red (blue) color denotes positive (negative) . Yellow line is for Brillouin zone boundary. Fermi surface is shown in black lines, where individual Fermi sheets are labeled by , , , and . High symmetry point labelled in black, red, and blue are consistent with Figure 2.
: Contour of FS on and planes are almost the same except for with . is evident for and , which disappears for .
for is in arc-shape with nearly two identical bands. For , is composed of two pieces, denoted as and , while for it is a single piece. Ellipse-shaped around , with increasing strain, shifts toward the , which it intersects for . A notable difference between the and planes is prominent in sheet for . On plane, is nearly circular arc shape for and elongated for , it disappears for . However, on plane, is closed contour near for .
While FS on and planes look similar, the Berry curvature distributions differ significantly. On plane, has no appreciable with and without strain. For , has around and axis and around . For , and have large around . For , and have large around . On plane, still has no contribution with and without strain. For , has both signs of . appears around and axis while does near axis. For , both and emerge near where nearly degenerate bands are retained and is pronounced in large region outside. For , is single-banded with appreciable around crossing with and arc close to axis.
eV: The Fermiology, at first sight, is quite similar for all strains [41]. On the plane for , is also four-fold but the degeneracy is lifted along . is rather straight line further away from with respect to . around is similar to with smaller size. around is oval-shaped with little distortion. For , while the overall Fermiology is retained respect to , the details need some comments. The lifted degeneracy of is larger (smaller) than compressive (tensile) along . is split into and . is smaller. For , is almost the same as the case for . , , and is getting closer and is collapsed to . On plane, the Fermiology remains the same as on plane except for . , , and is getting closer similar to , but not collapsed.
Now, we move on to Berry curvature distribution. On plane, for , there is no big contribution of . For and , appears along . On plane, for , appears near and . For and , contribution are found near , , and , differing in their magnitudes. Similar distribution but only the magnitude differences are found for other strains [42].
Conclusion
We have investigated the anomalous Hall conductivity (AHC) and anomalous Nernst conductivity (ANC) of the compensated ferrimagnet under isotropic strain and chemical potential variation, based on first-principles calculations. When eV, three distinct topological features—Weyl points, nodal lines, and gapped nodal lines—are simultaneously realized, occurring along distinct high-symmetry directions in the Brillouin zone in the framework of magnetic space group. These symmetry-protected features govern the Berry curvature landscape and strongly influence transverse transport. Dominant contribution to AHC arises from the plane; the isotropic strain can significantly enhance AHC, reaching up to . Meanwhile, ANC shows a sign reversal near the Fermi level and becomes strongly negative at eV for all strains except . While the overall band structure and Fermi surface topology are retained under strain, the Berry curvature magnitude and distribution evolve markedly. These results demonstrate how the interplay of symmetry, topology, and tunable parameters such as strain and doping interplay influences transverse transport responses in , highlighting its potential as a model system for strain-engineered spintronic applications and Berry curvature-driven transport phenomena.
Acknowledgments
This research is supported by National Research Foundation (NRF) of Korea (NRF-RS-2022-NR068225 and NRF-RS-2024-00449996). We are also grateful for support by the National Supercomputing Center with supercomputing resources (KSC-2025-CRE-0016) and computational resource of the UNIST Supercomputing center.
References
- [1]S. Nakatsuji, N. Kiyohara, and T. Higo, Large anomalous Hall effect in a non-collinear antiferromagnet at room temperature, Nature 527, 212 (2015).
- [2]M. Kimata, H. Chen, K. Kondou, S. Sugimoto, P. K. Muduli, M. Ikhlas, Y. Omori, T. Tomita, A. H. MacDonald, S. Nakatsuji, and Y. Otani, Magnetic and magnetic inverse spin Hall effects in a non-collinear antiferromagnet, Nature 565, 627 (2019).DOI
- [3]K. Uchida, S. Takahashi, K. Harii, J. Ieda, W. Koshibae, K. Ando, S. Maekawa, and E. Saitoh, Observation of the spin Seebeck effect, Nature 455, 778 (2008).DOI
- [4]N. Nagaosa, J. Sinova, S. Onoda, A. H. MacDonald, and N. P. Ong, Anomalous Hall effect, Rev. Mod. Phys. 82, 1539 (2010).DOI
- [5]H. Chen, Q. Niu, and A. H. MacDonald, Anomalous Hall Effect Arising from Noncollinear Antiferromagnetism, Phys. Rev. Lett. 112, 017205 (2014).pubmed.ncbi.nlm.nih.gov/24483927
- [6]J. Kübler and C. Felser, Non-collinear antiferromagnets and the anomalous Hall effect, Europhys. Lett. 108, 67001 (2014).
- [7]T. Jungwirth, Q. Niu, and A. H. MacDonald, Anomalous Hall Effect in Ferromagnetic Semiconductors, Phys. Rev. Lett. 88, 207208 (2002).pubmed.ncbi.nlm.nih.gov/12005602
- [8]L. Šmejkal, A. B. Hellenes, R. González-Hernández, J. Sinova, and T. Jungwirth, Giant and Tunneling Magnetoresistance in Unconventional Collinear Antiferromagnets with Nonrelativistic Spin-Momentum Coupling, Phys. Rev. X 12, 011028 (2022).DOI
- [9]D. Xiao, Y. Yao, Z. Fang, and Q. Niu, Berry-Phase Effect in Anomalous Thermoelectric Transport, Phys. Rev. Lett. 97, 026603 (2006).pubmed.ncbi.nlm.nih.gov/16907470
- [10]D. Xiao, M.-C. Chang, and Q. Niu, Berry phase effects on electronic properties, Rev. Mod. Phys. 82, 1959 (2010).DOI
- [11]Y. Yao, L. Kleinman, A. H. MacDonald, J. Sinova, T. Jungwirth, D.-S. Wang, E. Wang, and Q. Niu, First Principles Calculation of Anomalous Hall Conductivity in Ferromagnetic bcc Fe, Phys. Rev. Lett. 92, 037204 (2004).pubmed.ncbi.nlm.nih.gov/14753904
- [12]Z. Fang, N. Nagaosa, K. S. Takahashi, A. Asamitsu, R. Mathieu, T. Ogasawara, H. Yamada, M. Kawasaki, Y. Tokura, and K. Terakura, The Anomalous Hall Effect and Magnetic Monopoles in Momentum Space, Science 302, 92 (2003).
- [13]L. Šmejkal, A. H. MacDonald, J. Sinova, S. Nakatsuji, and T. Jungwirth, Anomalous Hall antiferromagnets, Nat. Rev. Mater. 7, 482 (2022).arxiv.org/abs/2107.03321
- [14]V. Baltz, A. Manchon, M. Tsoi, T. Moriyama, T. Ono, and Y. Tserkovnyak, Antiferromagnetic spintronics, Rev. Mod. Phys. 90, 015005 (2018).DOI
- [15]T. Jungwirth, X. Martí, P. Wadley, and J. Wunderlich, Antiferromagnetic spintronics, Nat. Nanotechnol. 11, 231 (2016).
- [16]T. Graf, C. Felser, and S. S. Parkin, Simple rules for the understanding of Heusler compounds, Prog. Solid State Chem. 39, 1 (2011).DOI
- [17]J. Kübler and C. Felser, Berry curvature and the anomalous Hall effect in Heusler compounds, Phys. Rev. B 85, 012405 (2012).DOI
- [18]L. Wollmann, A. K. Nayak, S. S. Parkin, and C. Felser, Heusler 4.0: Tunable materials, Annu. Rev. Mater. Res 47, 247 (2017).DOI
- [19]M. E. Jamet, Y. J. Wang, G. M. Stephen, I. J. McDonald, A. J. Grutter, G. E. Sterbinsky, D. A. Arena, J. A. Borchers, B. J. Kirby, L. H. Lewis, B. Barbierlini, A. Bansil, and D. Heiman, Compensated Ferrimagnetism in the Zero-Moment Heusler Alloy Mn₃Al, Phys. Rev. Appl. 7, 064036 (2017).
- [20]M. Park, G. Han, and S. H. Rhim, Anomalous Hall effect in a compensated ferrimagnet: Symmetry analysis for Mn₃Al, Phys. Rev. Res. 4, 013215 (2022).DOI
- [21]W. Shi, L. Muechler, K. Manna, Y. Zhang, K. Kopeernik, R. Car, J. van den Brink, C. Felser, and Y. Sun, Prediction of a magnetic Weyl semimetal without spin-orbit coupling and strong anomalous Hall effect in the Heusler compensated ferrimagnet Ti₂MnAl, Phys. Rev. B 97, 060406 (2018).
- [22]Y. Zhang, Y. Sun, H. Yang, J. Železný, S. P. P. Parkin, C. Felser, and B. Yan, Strong anisotropic anomalous Hall effect and spin Hall effect in the chiral antiferromagnetic compounds Mn₃X (X = Ge, Sn, Ga, Ir, Rh, and Pt), Phys. Rev. B 95, 075128 (2017).DOI
- [23]L. Šmejkal, R. González-Hernández, T. Jungwirth, and J. Sinova, Crystal time-reversal symmetry breaking and spontaneous Hall effect in collinear antiferromagnets, Sci. Adv. 6, eaaz8809 (2020).DOI
- [24]J. Noky, Q. Xu, C. Felser, and Y. Sun, Large anomalous Hall and Nernst effects from nodal line symmetry breaking in Fe₂MnX (X = P, As, Sb), Phys. Rev. B 99, 165117 (2019).
- [25]P. Li, J. Ko, W. Ning, J. Li, L. Miao, L. Min, Y. Zhu, Y. Wang, N. Alem, C.-X. Liu, Z. Mao, and B. Yan, Giant room temperature anomalous Hall effect and tunable topology in a ferromagnetic topological semimetal Co₂MnAl, Nat. Commun. 11, 3476 (2020).DOI
- [26]Z. L. Sun, K. L. Peng, J. H. Cui, C. S. Zhu, W. Z. Zhuo, Z. Y. Wang, and X. H. Chen, Pressure-controlled anomalous Hall conductivity in the half-Heusler antiferromagnet GdPtBi, Phys. Rev. B 103, 085116 (2021).DOI
- [27]C. Singh, V. Singh, G. Pradhan, V. Srihari, H. K. Poswal, R. Nath, A. K. Nandy, and A. K. Nayak, Pressure controlled trimerization for switching of anomalous Hall effect in triangular antiferromagnet Mn₃Sn, Phys. Rev. Res. 2, 043366 (2020).DOI
- [28]R. D. d. Reis, M. Ghorbani Zavareh, M. O. Ajeesh, L. O. Kutelak, A. S. Sukhanov, S. Singh, J. Noky, Y. Sun, J. E. Fischer, K. Manna, C. Felser, and M. Nicklas, Pressure tuning of the anomalous Hall effect in the chiral antiferromagnet Mn₃Ge, Phys. Rev. Mater. 4, 051401 (2020).
- [29]A. S. Sukhanov, S. Singh, L. Caron, T. Hansen, A. Hoser, V. Kumar, H. Borrmann, A. Fitch, P. Devi, K. Manna, C. Felser, and D. S. Inosov, Gradual pressure-induced change in the magnetic structure of the noncollinear antiferromagnet Mn₃Ge, Phys. Rev. B 97, 214402 (2018).
- [30]S. Kim, S. Pathak, S. H. Rhim, J. Cha, S. Jekal, S. C. Hong, H. H. Lee, S.-H. Park, H.-K. Lee, J.-H. Park, S. Lee, H.-G. Steinrück, A. Mehta, S. X. Wang, and J. Hong, Giant Orbital Anisotropy with Strong Spin-Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice, Adv. Sci. 9, 2201749 (2022).DOI
- [31]J. Son, S. Lee, S. J. Kim, B. C. Park, H.-K. Lee, S. Kim, J. H. Kim, B. H. Hong, and J. Hong, Hydrogenated monolayer graphene with reversible and tunable wide band gap and its field-effect transistor, Nat. Commun. 7, 13261 (2016).DOI
- [32]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).pubmed.ncbi.nlm.nih.gov/9984901
- [33]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized Gradient Approximation Made Simple, Phys. Rev. Lett. 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
- [34]X. Wang, J. R. Yates, I. Souza, and D. Vanderbilt, Ab initio calculation of the anomalous Hall conductivity by Wannier interpolation, Phys. Rev. B 74, 195118 (2006).DOI
- [35]I. Souza, N. Marzari, and D. Vanderbilt, Maximally localized Wannier functions for entangled energy bands, Phys. Rev. B 65, 035109 (2001).DOI
- [36]S. S. Tsirkin, High performance Wannier interpolation of Berry curvature and related quantities with Wannier-Berri code, npj Comput. Mater. 7, 33 (2021).
- [37]See Figs. S1 and S2 of Supplemental Material at http://link.aps.org/supplemental/xxxxx . Spin resolved band structure with and without strains are shown. At Γ, the half-metallicity is robust while the size of band gap changes.
- [38]See Fig. S8 of Supplemental Material at http://link.aps.org/supplemental/xxxxx. For this chemical potential shift, negative charge of 1.52 is needed.
- [39]Similar feature is found for opposite chemical potential shift, μ = E_F + 0.12 eV, where the magnitude of AHC monotonically decreases, or σ_xy increases from -680 to -292 S/cm with strain. This is not by topological singularity but by band splitting associated with representation near L. See Sec. V of Supplemental Material at http://link.aps.org/supplemental/xxxxx.
- [40]See Sec. III of Supplemental Material at http://link.aps.org/supplemental/xxxxx. Fermi surface sheets under different strains are shown for +1% interval, where the Fermi surface contour exhibits smoother and more continuous evolution.
- [41]See Fig. S7 of Supplemental Material at http://link.aps.org/supplemental/xxxxx. Bands around E_F-0.3 eV, near nodal lines do not change with respect to strain.
- [42]See Fig. S5, and S6 of Supplemental Material at http://link.aps.org/supplemental/xxxxx. For other strains, the overall Berry curvature distribution is similar with different magnitudes.