WorksPhysics and Astronomy
Intrinsic Berry phase contribution to Hall conductivity in CoS
Abstract
In Weyl semi-metals, the conduction and valence bands intersect at distinct points on the Brillouin zone (Weyl points), which act as monopoles of Berry curvature in momentum space. This nontrivial band topology, identified from electronic structure calculations, gives rise to various exotic magneto-transport properties. Hybrid functional calculations that incorporate a portion of exact exchange, magneto-transport measurements, and temperature-dependent resistivity confirm nontrivial band topology and half-metallicity in CoS of magnetic ordering temperature . However, electronic structure calculations also show that application of small strain transforms this half metallic character to the metallic. Interestingly, the magnetoresistance (MR) of the CoS films is characterized by a reentrant weak localization above a critical field at and a negative to positive transition in MR as the goes from to . Experimental observation of anomalous Hall resistivity and computed band structure, Berry curvature, and Hall conductivity () demonstrate that the in CoS is primarily driven by the intrinsic Karplus-Luttinger contribution, often linked to Berry phase physics.
Introduction
Recent studies have revealed that CoS₂, which crystallizes in the pyrite structure—a material long studied for its itinerant ferromagnetism and potential for half-metallicity—hosts Weyl fermions and Fermi arc surface states close to the Fermi level (), as well as topological nodal lines below the [1]. In Weyl semimetals (WSMs), the conduction and valence bands touch at isolated points known as Weyl points, which act as monopoles of Berry curvature in momentum space. This nontrivial band topology results in various exotic transport properties, such as a giant anomalous Hall effect (AHE), negative magnetoresistance, planar Hall effect, and anomalous Nernst effect. These features in the magneto-transport are key indicators of the Weyl character of electronic bands [2, 3, 4, 5].
Further, CoS₂ is an interesting example of the recently discovered class of experimentally verified magnetic topological metals (MTM) [6, 7, 8], which may potentially offer new mechanisms of spin-to-charge conversion in magnetic heterostructures [9, 10]. The discovery of the magnetic topological metals is of broader interest for fundamental science, providing a platform to realize axion insulators [11], the intrinsic AHE [12], and the anomalous fractional quantum Hall effect [13]. Recent research has also shown a strong connection between AHE and the Berry curvature of electronic states, particularly in topological semimetals (TSMs) and magnetic Weyl semimetals, where Weyl nodes near the contribute to large intrinsic AHE [12]. Single-crystalline CoS₂ shows a large anomalous Hall conductivity (AHC), which has been attributed to its half-metallic nature and the breaking of time-reversal symmetry [14]. The large positive magnetoresistance seen in CoS₂ is indicative of Weyl nodes near , which acts as a source of Berry curvature [15]. Additionally, CoS₂ exhibits transport properties influenced by spin, as evidenced by magnetoresistance and spin polarization [16, 17, 18, 19]. Polycrystalline CoS₂ also shows technologically important properties such as high thermoelectric power from room temperature to high temperature regimes [20], and high electrocatalytic activity suitable for the enhanced performance of quantum dot-sensitized solar cells [21].
In this study, we investigate the AHE of highly textured thin films of CoS₂. A ferromagnetic state develops in these samples at a critical temperature of 120 K, which is consistent with earlier measurements of the Curie temperature in both bulk polycrystalline samples and nanoparticles of CoS₂ [18, 22]. A quadratic scaling relationship between anomalous Hall resistivity () and longitudinal resistivity () is observed, which indicates that the primary contribution to the large AHE in these samples comes from the band structure driven intrinsic mechanism. The electronic band structure, Berry curvature, and Hall conductivity calculations support the intrinsic Berry phase contribution to Hall conductivity and half metallic character of CoS₂.
Experimental Details
The precursor for the growth of CoS₂ is a 10 nm thick film of cobalt deposited by dc magnetron sputtering at the rate of 0.1 Å/s on 2 – inch diameter thermally oxidized silicon wafers with 300 nm thick SiO₂. The Co films were deposited at 5 mTorr ultrahigh purity Ar gas pressure in a vacuum system of base pressure torr. The thermal sulfurization of the Co film in the presence of sulfur vapors was carried out using an atmospheric pressure chemical vapor deposition reactor which consists of a two-zone tubular furnace. Before initiating the thermal ramp cycle, the reactor tube was evacuated with a dry pump and flushed several times with an Ar/H mixture. A constant flow rate of 25 standard cubic centimeter per minute of Ar (with 5 (%) H) was maintained during the reaction cycle. The temperature of the center zone (Zone 1), containing the Co film, was raised to 500 °C, while the temperature of the sulfur-containing zone (Zone 2) was ramped up to 250 °C. These temperatures were held constant for 2 hours for the sulfurization reaction to complete and then, the furnace was rapidly cooled to room temperature by opening its top lid. The crystallographic structure of the film was measured with X-ray diffraction (XRD) using a Rigaku smart lab X-ray diffractometer with Cu-K radiation. The Hall resistivity and magnetoresistance of the CoS films were measured down to 10 K in a physical property measurement system equipped with a 9-tesla superconducting magnet.
Computational Details
First-principles electronic structure calculations are performed using the Vienna Ab initio Simulation Package [23, 24] using projector augmented wave pseudopotentials [25] and Perdew-Burke-Ernzerhof (PBE) functionals [26] within the generalized gradient approximation. A plane wave energy cutoff of 500 eV, a smearing value of 0.1 eV, and a -centered Monkhorst-Pack k-mesh are used in structural relaxation and electronic structure calculations. The unit-cell structure contains four formula units, and all calculations, unless otherwise specified, are performed for this structure. The self-consistent energy convergence criterion of eV is used in the calculations of atomic and electronic structures, while the atomic positions and lattice constants are relaxed until the maximum force on each atom was less than eV/Å. Spin-orbit coupling (SOC) effects are incorporated into the self-consistent field calculations, with the magnetization oriented along
the c-axis. The underestimated band gaps obtained with PBE are corrected using hybrid functional calculations, which partly incorporate the exchange-correlation potential of standard density functional theory with the Hartree-Fock exchange [27]. Maximally localized Wannier functions, including Co orbitals and S orbitals, are used to describe the electronic structure and calculate AHC and Berry curvature using Wannier90 [28] and Wannier tool [29] packages.
Results and Discussion
Crystal Structure, magnetic ordering and magnetoresistance
Figure 1 shows the crystal structure and the XRD scan of a 10 nm thick CoS film. The pattern is characterized by the strong (200) reflection of the silicon substrate at and a sharp but low intensity line centered at . Since CoS crystallizes in the cubic space group [20] the structure with lattice parameters Å, this sharp diffraction line can be indexed as the (200) reflection of the cubic CoS, which is in agreement with earlier measurements on CoS films [21, 30]. In addition, our theoretically optimized lattice constant of CoS after geometrical relaxation is 5.51 Å, which compares well with the experimental value. The structure of the CoS is unique in the sense that the Co atoms (Blue balls) form the vertices of a cube and S atoms are placed in such a way to form S-S dimers, leading to a robust high symmetry structure (Figure 1(a)). Figure 2(a) shows the isothermal magnetization data at 10 K, measured with the magnetic field oriented in two distinct direction; parallel to sample normal and parallel to plane. The saturation moments are approximately per Co atom for the out-of-plane geometry and per Co atom for the in-plane geometry. These moments compare well with the calculated values of ( spin and orbital) and those reported in the literature [1, 18]. The magneto-crystalline anisotropy energy (MAE) () calculations show slightly different values, as usually observed in transition metal based cubic materials [31]. The magnetization data of Figure 2(a) reveal that the ferromagnetic properties of CoS are anisotropic, with an in-plane anisotropy energy density of . The zero-field longitudinal resistivity () of the films was measured over a temperature range of 10 to 300 K (Figure 2(b)). The exhibits a metallic behavior from 300 K down to the lowest temperature, with a hump-like feature at K. Below 50 K, the resistivity follows a dependence, as demonstrated in the inset of Figure 2(b). This dependence has been previously observed in potential half-metal systems [32]. Our theoretical calculations reveal that CoS exhibits a half-metallic nature. However, an application of compressive strain (above 2%) induces a transition to a fully metallic state (Figure 3(a)), exhibiting a minority-spin electron pocket at the Brillouin zone corner. Further, the ferromagnetism collapses below 5% compressive strain with nearly equal integrated spin up and spin down density of states (DOS) up to the Fermi level (Figure 3(b)). This suggests that the electronic structure is highly sensitive to lattice parameters, with strain modifying the band structure and potentially closing the spin gap. This finding helps to resolve the controversy in previous works by demonstrating that small structural variations can significantly impact electronic properties of CoS [1, 33, 34].

Figure 1. (a) Crystal structure of CoS showing octahedrally coordinated Co atoms (Blue balls). (b) X-ray diffraction () scan of the 10 nm thick CoS film collected at ambient temperature. Inset shows the magnified view of the scan centered at (200) reflection.

Figure 2. (a) The isothermal magnetization at 10 K, measured with the magnetic field applied out-of-plane and in-plane of the sample. (b) Temperature dependence of the zero-field resistivity of the CoS film, inset shows the T dependence of the resistivity over the temperature range 10 to 50 K. (c) The MR (%) vs magnetic field for different temperatures .

Figure 3. (a) Density of states (DOS) with different compressive and tensile strain. (b) Variation of the magnetic moment (left axis) and integrated DOS up to the Fermi level (right axis) with different compressive and tensile strain.
The magnetoresistance and Hall resistivity of the film have been measured at several temperatures in the field range of -3 to +3 tesla applied perpendicular to the plane of the sample and the direction of current. The out-of-plane field magnetoresistance is calculated using the relation
where and are the resistivity of the sample at field and in zero-field respectively. The MR (%) curves at each temperature below the starting from the lowest temperature are shown in Figure 2(c). The blue color band in the figure marks the field range tesla, where there is a peak at zero field, followed by a cusp on either side of the peak. The intensity of the zero-field peak decreases as the temperature is raise. This particular feature is suggestive of a magnetic field induced suppression of weak localization in this system of a weak spin orbit coupling [35]. Such quantum interference effects are more likely to occur at low temperatures and eventually vanish with the increasing temperature. An intriguing feature of the data shown in Figure 2(c) is the cusp in MR in the vicinity of tesla. While the negative MR (%) seen at tesla and can be interpreted as the field suppression of electron-magnon scattering [32, 36], which is present in all conventional ferromagnets, origin of the cusp needs further discussion. For this purpose, Figure 4(a) shows an expanded version of the MR data measured at 10 K. The drop in the magnitude of MR (increase in resistivity) with increasing field in the field range of 0.15 to 0.3 tesla is suggestive of an enhance backscattering of charge carriers by a precipitous growth of partially oriented magnetic domains in the system just before the magnetic saturation is reached. To support this argument, Figure 4(b) shows the out-of-plane magnetization loop of the film together with the dM/dH in Figure 4(c). It is noted that the cusp in MR is located at a point where the magnetization is yet to saturate fully. Clearly, its origin appears to be a result of the competition between magnetic field induced suppression of weak localization, which is dominant at the lower fields and the scattering of charge carriers by randomly oriented domains that causes a positive MR [32].

Figure 4. (a) The MR vs magnetic field for 10 K. (b) The static magnetization measured as a function of magnetic field at 10 K. (c) The dM/dH as a function of magnetic field at 10 K.
The temperature dependence of at several fields is presented in Figure 5(a), where at K, the curves show a significant upward shift with the increasing field, indicating a large positive magnetoresistance. However, at K the dependence of the resistivity on field is miniscule and negative. Further, the field dependence of magnetoresistance at shown in Figure 5(b) revels that it is positive at all fields. The field and temperature dependence of MR in a broad class of materials, including metals, doped oxides, semiconductors, and topological materials, can be understood within the framework of Kohler’s rule [37]. In its simplest form, it states that the MR should follow a scaling law of the form:

Figure 5. (a) Temperature dependence of the resistivity in the vicinity of for different magnetic fields applied perpendicular to the plane of the sample. (b) The MR (%) vs Magnetic field for different .
where is the applied magnetic field and the zero field resistivity at a given temperature. The scaling law predicts that all MR curves measured at different temperatures should fall into a single universal curve. Figure 6(a) shows the MR data of 140 and 160 K plotted in the framework of Eq. (2). However, the data deviate from this scaling law. One of the primary reasons for this significant deviation is the omission of temperature-dependent variations in . To address this, the data have been replotted using the modified Kohler’s rule [37], which is expressed as

Figure 6. (a) The MR (%) as a function of for two different temperatures, and their corresponding Kohler’s fitting is shown by green curves. (b) The MR (%) as a function of for two different temperatures, and their corresponding modified Kohler’s fitting is shown by green curves.
Where represents the carrier density renormalized by the carrier effective mass, the values of obtained from this scaling are 0.77 at 140 K and 0.81 at 160 K, respectively. Figure 6(b) clearly shows a better agreement with Eq. (3). Above 160 K, the MR is approximately zero, so no information on MR can be obtained beyond this temperature.
Anomalous Hall effect and Magnetization
While the ordinary Hall effect, driven by the Lorentz force, is well understood, the AHE remains a topic of significant interest due to its complex origins and potential applications. The AHE can arise from both extrinsic mechanisms, like skew scattering and side jump effects influenced by spin-orbit interaction, and intrinsic mechanisms, such as the Karplus–Luttinger effect related to the spin-orbit interaction of Bloch electronic bands. Here, the measurements of Hall resistivity () have been carried out over a wide field and temperature () phase space. Figure 7(a) shows the data collected at several temperatures in the range of 10 to 140 K. A nonlinear magnetic field dependence of is observed at K, which tends to reach saturation at a field above tesla. The nonlinearity has its origin in the AHE which occurs alongside the conventional Hall effect. The transverse resistivity of the sample measured in the standard Hall geometry is expressed as

Figure 7. (a) Magnetic field dependence of the Hall resistivity at different temperatures, from 10 to 140 K. (b) The static magnetization measured as a function of magnetic field at the same set of temperatures as in (a).
The first term in this eq. (4) represents the ordinary Hall resistivity, caused by the Lorentz force on charge carriers and depends on the field as , where is the Hall coefficient. The is negative over the entire temperature region, indicating that the dominant carriers are electron-type. The electron carrier density can be deduced using the relation of which is shown in Figure 8(a), and it reaches a value cm at 10 K, which is of the same order as for other half-metallic systems, such as CoSnS [38]. The carrier density remains almost temperature independent up to K and beyond that it decreases with the increasing temperature. The anomalous Hall resistivity in collinear ferromagnets has its origin in the magnetization of the sample and expressed as , where the (T) is anomalous Hall coefficient. The increases monotonically with increasing temperature, reaching the maximum value at 90 K, and beyond this, it decreases as seen in Figure 8(a).

Figure 8. (a) Temperature variation of the carrier concentration (left axis) and anomalous Hall coefficient R (right axis). (b) Temperature variation of the anomalous Hall resistivity .
The manipulation of the AHE by controlling magnetization is of great interest in condensed matter physics due to its potential applications in the design of spintronic devices. To verify that the pronounced AHE observed in this system is due to its ferromagnetic spin structure, we conducted magnetization measurements with the magnetic field aligned parallel to the film normal. The vs field plots of the sample measured at the same set of temperatures where the was measured are shown in Figure 7(b). As for the , the magnetization also tends towards a constant value at tesla. Furthe, the plots reveal a tinny loop with a coercive field of 150 Oe indicating the soft magnetic behavior of CoS, as shown in Figure 7(b). The field-dependent at different temperatures has been calculated by subtracting the ordinary Hall contribution from the field-dependent following Eq. (6). Figure 8(b) shows the temperature dependence of ,
which increases with temperature, reaching a maximum at 90 K. To quantitatively assess the contributions of intrinsic and extrinsic factors to the anomalous Hall resistivity, we fitted versus data (blue spheres in Figure 9(a)) using the conventional scaling relation [38, 39]:

Figure 9. (a) Fitting of anomalous Hall resistivity () vs longitudinal resistivity () using conventional scaling relation (Red line) and the variations of anomalous Hall conductivity (AHC) vs longitudinal conductivity (inset). (b) The AHC as a function of temperature, and the variations of different AHC as a function of temperature (inset). (c) Comparison of anomalous Hall angle (AHA) and AHC values of CoS with the reported results of other crystals exhibiting AHE. The temperature dependence of AHA (inset).
where and provide information about extrinsic skew scattering and the combined effect of side jump scattering and intrinsic contributions arising from the band structure [40], respectively. From this fitting, we obtained and . The large value of indicates that the AHE is predominantly driven by intrinsic Karplus – Luttinger contribution [40], which is often described in terms of Berry Phase physics, and the side jump mechanism.
The AHC of a collinear ferromagnetic scales with the longitudinal conductivity () [41]. The inset of Figure 9(a) presents AHC as a function of , revealing a significant deviation from linearity. Such pronounced deviations have also been observed in magnetic Weyl metals [42]. We calculated the temperature-dependent using the following relation,
which is shown in Figure 9(b). The AHC increases to 1145 at approximately 90 K and then drops. The is a function of and through Eq. (5) and 6. The side jump contribution to can be estimated using the expression , where and are the spin-orbit interaction energy and the Fermi energy respectively [43, 44]. The physical quantities , , and are the electronic charge, Planck’s constant, and lattice parameter, respectively. For most ferromagnetic metals, is of the order of [38], Using the lattice constant Å, the derived extrinsic side-jump contribution is only about , which is much smaller compared to the intrinsic part. Using the values of and , we calculated the temperature-dependent magnitudes of extrinsic skew scattering AHC () and of the intrinsic AHC (). These results are plotted in the inset of Figure 9(b). Here, we also calculate anomalous Hall angle (AHA ), which is shown as inset of Figure 9(c) The AHA is an intrinsic parameter, which defines the efficiency of the conversion of longitudinal current into transverse current or, anomalous Hall current. The maximum value of AHA (%) is seen at K. The results of AHC are shown in Figure 9(c) and compared with reported values for several non-collinear magnets. Here, the result for the current compound are represented by the red star symbol in Figure 9(c). Our sample exhibits the highest AHC and a significant AHA (%) among all noncollinear magnets. The high AHC in this material is a consequence of a large Berry phase (discussed below).
To understand the electronic structure origin of the AHE, we calculate the band structure, Fermi surface and Berry curvature. In Figure 10(a), we show calculated atom projected electronic band structure of CoS. These hybrid functional band structure calculations include SOC. The bands near the primarily consist of the -states of sulfer, strongly hybridized with Co -states. Inclusion of SOC leads to splitting of bands particularly along the - direction due the unpaired electrons in Co orbitals. A pronounced peak in Berry curvature, , is

Figure 10. (a) Atomic projected electronic band structure, (b) Berry curvature (in Å) along the high-symmetry path, with an inset depicting the three-dimensional Fermi surface, and (c) anomalous Hall conductivity components , , and (in S/cm) near the as a function of energy.
observed in Figure 10(b), which results from the nearly degenerate band splitting induced by SOC along the - and - directions. Notably, the uniform sign of throughout the Brillouin zone suggests a net Berry curvature flux and points toward the presence of topologically non-trivial band structures, potentially supporting robust edge states. This intrinsic Berry curvature acts as a fictitious magnetic field in momentum space, thereby contributing directly to the AHC. As a consequence, the calculated AHC, , and shown in Figure 10(c), exhibits a strong energy dependence in the vicinity of the . The sign reversal in as the is tuned reflects the competing contributions of Berry curvature from different regions of the Brillouin zone. This behavior underscores the sensitivity of the AHE to subtle details in the band topology and highlights the potential for tuning the Hall response via doping or gating.
Conclusions
In conclusion, the experimental measurements of electronic transport and magnetization combined with ab initio calculations confirm the half-metallic nature of CoS. Electronic structure calculations also show that application of a small strain transforms this half metallic characteristic to metallic. A pronounced cusp is seen in the field dependence of the magnetoresistance at K, which appears to be a result of the competition between field suppression of weak localization and carrier back scattering by randomly oriented magnetic domains. A transition from negative to positive magnetoresistance is also seen above the ordering temperature. Additionally, the experimental observation of anomalous Hall resistivity, along with ab initio computed band structure and Berry curvature, suggest that the AHE is primarily driven by the intrinsic Karplus–Luttinger contribution, which is often associated with Berry phase physics.
Acknowledgment
This research has been performed at the United States Department of Defense funded Center of Excellence for Advanced Electro-photonics with 2D materials – Morgan State University, under grant No. W911NF2120213. The theoretical and computational research is supported as part of the Center for Energy Efficient Magnetics, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award number DE-AOC2-76SF00515. H.P and D.P acknowledge the use of the computational facilities on the Frontera supercomputer at the Texas Advanced Computing Center (TACC) via the pathway allocation, DMR23051. We also thank to Prof. Rajeshwari Kolagani and Marcus Rose from Towson University for their assistance with the X-ray diffraction measurements.
References
References
- [1]N. B. Schröter, I. Robredo, S. Klemenc, R. J. Kirby, J. A. Krieger, D. Pei, T. Yu, S. Stolz, T. Schmitt, P. Dudin, et al., Science Advances 6, eabd5000 (2020).
- [2]P. Li, J. Koo, W. Ning, J. Li, L. Miao, L. Min, Y. Zhu, Y. Wang, N. Alem, C.-X. Liu, et al., Nature communications 11, 3476 (2020).
- [3]Y. Li, Z. Wang, P. Li, X. Yang, Z. Shen, F. Sheng, X. Li, Y. Lu, Y. Zheng, and Z.-A. Xu, Frontiers of Physics 12, 1 (2017).
- [4]R. Gopal, Y. Singh, et al., Journal of Magnetism and Magnetic Materials 502, 166547 (2020).
- [5]H. Reichlova, R. Schlitz, S. Beckert, P. Swekis, A. Markou, Y.-C. Chen, D. Kriegner, S. Fabretti, G. Hyeon Park, A. Niemann, et al., Applied Physics Letters 113 (2018).
- [6]D. Liu, A. Liang, E. Liu, Q. Xu, Y. Li, C. Chen, D. Pei, W. Shi, S. Mo, P. Dudin, et al., Science 365, 1282 (2019).
- [7]I. Belopolski, K. Manna, D. S. Sanchez, G. Chang, B. Ernst, J. Yin, S. S. Zhang, T. Cochran, N. Shumiya, H. Zheng, et al., Science 365, 1278 (2019).
- [8]N. Morali, R. Batabyal, P. K. Nag, E. Liu, Q. Xu, Y. Sun, B. Yan, C. Felser, N. Avraham, and H. Beidenkopf, Science 365, 1286 (2019).
- [9]S. S.-L. Zhang, A. A. Burkov, I. Martin, and O. G. Heinonen, Physical Review Letters 123, 187201 (2019).
- [10]P. Brown, K.-U. Neumann, A. Simon, F. Ueno, and K. Ziebeck, Journal of Physics: Condensed Matter 17, 1583 (2005).
- [11]X. Wan, A. M. Turner, A. Vishwanath, and S. Y. Savrasov, Physical Review B—Condensed Matter and Materials Physics 83, 205101 (2011).
- [12]A. Burkov, Physical review letters 113, 187202 (2014).
- [13]C. Wang, L. Gioia, and A. A. Burkov, Physical Review Letters 124, 096603 (2020).
- [14]J. Choi, J.-H. Park, W. Kyung, Y. Kim, M. K. Kim, J. Kwon, C. Kim, J.-W. Rhim, S. Y. Park, and Y. Jo, Advanced Science , 2307288 (2024).
- [15]S. Zhang, Y. Wang, Q. Zeng, J. Shen, X. Zheng, J. Yang, Z. Wang, C. Xi, B. Wang, M. Zhou, et al., Proceedings of the National Academy of Sciences 119, e2208505119 (2022).
- [16]H. Jarrett, W. Cloud, R. Bouchard, S. Butler, C. Frederick, and J. Gillson, Physical review letters 21, 617 (1968).
- [17]K. Adachi, M. Matsui, and Y. Omata, Journal of the Physical Society of Japan 50, 83 (1981).
- [18]L. Wang, T. Chen, and C. Leighton, Physical Review B 69, 094412 (2004).
- [19]L. Wang, K. Umemoto, R. Wentzcovitch, T. Chen, C. Chien, J. Checkelsky, J. Eckert, E. Dahlberg, and C. Leighton, Physical review letters 94, 056602 (2005).
- [20]S. Hébert, E. Guilmeau, D. Berthebaud, O. Lebedev, V. Rodatis, and A. Maignan, Journal of Applied Physics 114 (2013).
- [21]M. S. Faber, K. Park, M. Caban-Acevedo, P. K. Santra, and S. Jin, The journal of physical chemistry letters 4, 1843 (2013).
- [22]N. Kumar, N. Raman, and A. Sundaresan, Zeitschrift für anorganische und allgemeine Chemie 640, 1069 (2014).
- [23]J. Furthmüller, J. Hafner, and G. Kresse, Phys. Rev. B 53, 7334 (1996).
- [24]G. Kresse and J. Furthmüller, Comput. Mater. Sci. 6, 15 (1996).
- [25]P. E. Blöchl, Phys. Rev. B 50, 17953 (1994).
- [26]J. P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).
- [27]J. Heyd, G. E. Scuseria, and M. Ernzerhof, J. Chem. Phys. 118, 8207 (2003).
- [28]G. Pizzi, V. Vitale, R. Arita, S. Blügel, F. Freimuth, G. Géranton, M. Gibertini, D. Gresch, C. Johnson, T. Koretsune, J. Ibañez-Azpiroz, H. Lee, J.-M. Lihm, D. Marchand, A. Marrazzo, Y. Mokrousov, J. I. Mustafa, Y. Nohara, Y. Nomura, L. Paulatto, S. Poncé, T. Ponweiser, J. Qiao, F. Thöle, S. S. Tsirkin, M. Wierzbowska, N. Marzari, D. Vanderbilt, I. Souza, A. A. Mostofi, and J. R. Yates, J. Phys.: Condens. Matter. 32, 165902 (2019).
- [29]Q. Wu, S. Zhang, H.-F. Song, M. Troyer, and A. A. Soluyanov, Computer Physics Communications 224, 405 (2018).
- [30]J. Song, C. Zhang, J. Zhang, H. Zhou, L. Chen, L. Bian, and A. Yuan, Journal of Nanoparticle Research 21, 1 (2019).
- [31]J. M. Coey, Magnetism and magnetic materials (Cambridge university press, 2010).
- [32]T. Akimoto, Y. Moritomo, A. Nakamura, and N. Furukawa, Physical Review Letters 85, 3914 (2000).
- [33]R. Yamamoto, A. Machida, Y. Moritomo, and A. Nakamura, Physical Review B 59, R7793 (1999).
- [34]T. Shishidou, A. Freeman, and R. Asahi, Physical Review B 64, 180401 (2001).
- [35]P. A. Lee and T. V. Ramakrishnan, Rev. Mod. Phys. 57, 287 (1985).
- [36]H. Yamada and S. Takada, Progress of theoretical physics 48, 1828 (1972).
- [37]J. Xu, F. Han, T.-T. Wang, L. R. Thoutam, S. E. Pate, M. Li, X. Zhang, Y.-L. Wang, R. Fotovat, U. Welp, et al., Physical Review X 11, 041029 (2021).
- [38]Q. Wang, Y. Xu, R. Lou, Z. Liu, M. Li, Y. Huang, D. Shen, H. Weng, S. Wang, and H. Lei, Nature communications 9, 1 (2018).
- [39]Y. Tian, L. Ye, and X. Jin, Physical review letters 103, 087206 (2009).
- [40]R. Karplus and J. Luttinger, Physical Review 95, 1154 (1954).
- [41]N. Nagaosa, J. Sinova, S. Onoda, A. H. MacDonald, and N. P. Ong, Reviews of modern physics 82, 1539 (2010).
- [42]S. Nakatsuji, N. Kiyohara, and T. Higo, Nature 527, 212 (2015).
- [43]S. Onoda, N. Sugimoto, and N. Nagaosa, Physical review letters 97, 126602 (2006).
- [44]P. Nozières and C. Lewiner, Journal de Physique 34, 901 (1973).