WorksPhysics and Astronomy
Wide-band Unambiguous Quantum Sensing via Geodesic Evolution
Abstract
We present a quantum sensing technique that utilizes a sequence of pulses to cyclically drive the qubit dynamics along a geodesic path of adiabatic evolution. This approach effectively suppresses the effects of both decoherence noise and control errors while simultaneously removing unwanted resonance terms, such as higher harmonics and spurious responses commonly encountered in dynamical decoupling control. As a result, our technique offers robust, wide-band, unambiguous, and high-resolution quantum sensing capabilities for signal detection and individual addressing of quantum systems, including spins. To demonstrate its versatility, we showcase successful applications of our method in both low-frequency and high-frequency sensing scenarios. The significance of this quantum sensing technique extends to the detection of complex signals and the control of intricate quantum environments. By enhancing detection accuracy and enabling precise manipulation of quantum systems, our method holds considerable promise for a variety of practical applications.
Introduction
Accurate characterization of the qubit environment holds significant importance across a range of applications, spanning from quantum information processing to quantum sensing [1, 2, 3, 4]. A widely utilized technique for achieving this is the implementation of dynamical decoupling (DD) pulse sequences [5, 6]. These sequences serve to filter out environmental noise, thereby extending the quantum coherence time, as well as to extract and amplify signals of specific frequencies [3, 4, 7]. Consequently, qubits under such sequences become highly sensitive quantum sensors, presenting diverse applications. For instance, nitrogen-vacancy (NV) centers [8, 9, 10] subjected to DD pulse sequences enable nanoscale nuclear magnetic resonance (NMR) [7, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26], spin label detection [27, 28, 29], spin cluster imaging [30, 31, 32, 33, 34, 35, 36, 37, 38], and AC field sensing [39, 40, 41, 42, 43, 44, 45, 46]. Furthermore, they can be employed for controlling nearby single nuclear spins [47, 48, 49, 50, 51, 52] in the context of quantum information processing [53, 54], quantum simulations [55], and quantum networks [56, 57, 58, 59].
However, DD pulse sequences used for quantum sensing, such as the commonly employed Carr-Purcell-Meiboom-Gill (CPMG) [60, 61] and XY8 [62] sequences encounter an issue known as spectral leakage and spurious resonance. These complications make the interpretation of the sensor’s recorded signal challenging and can result in ambiguous signal identification [63, 64]. DD pulses introduce abrupt temporal state flipping of the qubit sensor, causing a pronounced frequency modulation at a specific frequency [indicated by the gray line in Figure 1(d)]. This modulation leads to a strong resonance at the flipping frequency, enabling frequency-selective sensing. However, it also generates resonances at other frequencies, as evident in its Fourier transform [represented by the gray squares in Figure 1(d)]. Consequently, signals outside the target sensing frequency band can contribute to the sensor’s response and each individual frequency signal produces multiple signal peaks in the measured spectrum. Complex signals with a wide frequency range often exhibit significant signal overlap, posing challenges for analysis. Additionally, quantum heterodyne methods employed to down-convert high-frequency signals for sensing can exacerbate signal overlap [43, 44, 45]. Furthermore, the limited power of control pulses introduces spurious signals at unexpected frequencies [63]. These factors collectively present obstacles to reliably measuring environmental signals, particularly when various background noise sources are not fully characterized. With this goal in mind sequence timing has been optimised [65, 66] to eliminate higher-harmonics and sequence randomization has been explored to mitigates spurious signals [67, 68]. However, both approaches can address only specific their aspects and can solve these only partially.

Figure 1. Quantum sensing via geodesic jumping. (a) Upper panel: Repeated application of a sequence of pulses realizes cyclic quantum adiabatic evolution along the geodesic in (b) or (c). Lower panel: Combined with synchronized readout techniques for arbitrary frequency resolution. (b) , where the closed geodesic is sampled by pulses. The red solid line illustrates the trajectory of the state evolution starting at for . When matches the frequency of the target, a resonance occurs. (c) As (b) but for which uses a horizontal geodesic, e.g., for robust heterodyne sensing of high-frequency signal. The resonant condition is accurately tuned by and the frequency of control field. (d) The resulting modulation function (red line for ) and its Fourier components (red cycles) where for all . The gray line and squares are the corresponding ones for DD pulse sequences.
In this Letter, we present a novel approach called cyclic geodesic driving, which enables unambiguous sensing of signals across a broad frequency range on qubit sensors. Our method involves the application of a sequence of -pulses to implement accelerated high-fidelity quantum adiabatic driving, effectively inducing periodic evolution of the quantum sensor along the geodesic path on the Bloch sphere. As a result, the resonance frequency of the quantum sensor aligns with the frequency of the periodic evolution, while simultaneously mitigating the impact of environmental background noise. By employing this technique, each individual frequency signal generates a single, distinct signal response within the wide frequency band. This eliminates undesirable signal overlap, enabling precise characterization of complex external environments and signals. For achieving arbitrary high frequency resolution, our method can be combined with synchronized readout techniques [39, 40]. Furthermore, our approach exhibits remarkable resilience against control errors, as it is the counterpart of quantum adiabatic control. Overall, our proposed method of cyclic geodesic driving offers a robust and effective solution for wide-band, unambiguous signal sensing, enabling accurate analysis of intricate quantum systems and external environments.
Adiabatic shortcut by jumping
Our sensing scheme utilizes a sequence of periodic pulses [Figure 1(a)] which achieves cyclic quantum adiabatic evolution along a geodesic [69, 70, 71, 72] defined by the control Hamiltonian for the qubit sensor
where the instantaneous eigenstates are varied by a parameter starting with at the initial time . For adiabatic evolution of the parameter , the evolution operator for the quantum state driven by reads [69, 73, 74]
which transfers the initial state to the instantaneous eigenstate at a later time. We use the Born-Fock gauge such that are the dynamic phases. To realize the adiabatic evolution by in finite time, we choose
which connect two orthonormal states via a geodesic curve [75]. In our scheme we apply a sequence of control pulses via Eq. (1) with at the moments (), where is the pulse number in one periodic of evolution, see Figure 1(a). We use the linear relation , where frequency can be negative depending on the change of in time. Each control pulse has a time duration such that the pulse area . Between the pulses, there is no control, i.e., if . We remove the dynamic phases at the final time of the evolution, we introduce a phase shift to the pulses in the second-half of the sequence. According to Refs. [69, 70, 71], the sequence realizes with unit-fidelity at the middle of any successive path points . For other values of the difference between and the actual evolution implemented by is negligible when is sufficiently large. In contrast to conventional shortcuts to adiabaticity [74] to accelerate adiabatic process, in our method the instantaneous eigenstates of the control Hamiltonian are the same as the evolution path in Eq. (2). This avoids the use of counter-diabatic fields and retains the intrinsic robustness of traditional adiabatic process [71].
Unambiguous wide-bandwidth robust sensing
To demonstrate the concept of quantum sensing through the aforementioned geometric control, we examine a qubit coupled to its environment via the interaction Hamiltonian
where the Pauli operator and could be a classical field or a quantum operator in a rotating frame which includes possible dephasing noise. We use the control Hamiltonian and the states and for the geodesic in Eq. (3) for sensing. This geodesic driving around the -axis () is sketched in Figure 1(b). In the rotating frame of , becomes . For the evolution Eq. (2), we find the approximated transformation [76]
which have the nice property that they only depend on the geometric parameter . We obtain [76]
where when is sufficiently large the modulation function has only one Fourier component over a large frequency band, see Figure 1(d). Conventional
DD sequences [3, 4] also induce modulation factors to the operator with for ideal sequences [3, 4, 77]. However, those modulation factors have multiple Fourier components that complicate the interpretation of the sensor’s signal [63, 64, 65], see Figure 1(d) for equally spaced DD sequences [3, 4, 60, 61, 62, 78, 79, 80].
In Figure 2(a)–(Figure 2d) we simulate the measured spectrum of a classical AC field with , where are the frequencies of different components. For the result of Figure 2(a) obtained by the widely-used robust XY8 sequence with an interpulse duration [62], all the frequencies ( kHz) cause transitions of the sensor states at kHz via the 1st, 3rd, and 5th harmonics. This problem of ambiguous spectral overlap is not solved even when we improve the frequency resolution sufficiently high via the synchronized readout technique (Qdyne) [39, 40], see Figure 2(c), because all the frequency components contribute to the readout signal in Qdyne. However, using GD, only the frequency kHz contributes to the dip at the resonance , because we have the effective Hamiltonian from Eq. (6) after rotating wave approximation [76]. The phase dependence on the effective Hamiltonian (and hence the signal) allows for arbitrary frequency resolution with synchronized readout, see Figure 2(d) and Figure 1(a). The results also show that our protocol is more resistant to control errors and dephasing noise. The already strong robustness of GD is enhanced further with increasing number of pulses, see Figure 4.
Figure 2. Quantum spectroscopy. (a) Population signal of XY8 sequence (blue solid line) for spectroscopy of AC fields with the frequencies kHz by varying the pulse interval . The 1500.05 kHz and 2499.88 kHz AC fields distort the signal centered at 500 kHz via the 3rd and 5th harmonics, respectively. Yellow dashed line is the result when there is dephasing noise (with a control-free decoherence time s) and control errors (with about 20% drift on the amplitude of control field). (b) As (a) but by using GD. The 500 kHz signal dip is not distorted by the 1500.05 and 2499.88 kHz AC fields. (c) Power spectrum for the AC signal fields in (c) by using the synchronized readout technique in Ref. [39, 40]. The resonances due to higher harmonics make the signal unidentifiable even through the expected spectral resolution is about 1 Hz. (d) As (c) but by using GD. (e) Signal of XY8 sequence for the detection of spin with its frequency indicated by a red arrow. The spurious resonance (centered around the pink vertical line) produced by a spin in diamond distorts the spin signal. Yellow dashed line is the result when there are MHz detuning error and 30% of amplitude drift in the control field. (f) As (e) but by using GD, where the spurious signals disappear. See [76] for details of simulation.

Figure 4. Control fidelity with respect to amplitude and detuning errors for (a) XY8 sequence, (b) GD with , (c) GD with , (d) CPMG sequence with 40 pulses for heterodyne sensing, (e) GD with , (f) GD with but each pulse is replaced by a Knill pulse. All the protocols have the same sequence time length, and the ideal Rabi frequency of the control is MHz.
It is interesting that cyclic geodesic driving also fully solve the problems of spurious response due to finite-width pulses [63], as detailed in [76]. In Figure 2(e) and (Figure 2f), we simulate the quantum sensing of a single proton spin () by an NV center. A spin in diamond is also coupled to the NV center as a noise source. For this case is a quantum operator [48, 49, 76]. For the result Figure 2(e) obtained by XY8 sequences, the spurious response from the spin disturb the target proton spin signal and lead to misidentification of nuclei for proton. On the contrary, GD provides a clean signal dip in the spectrum [Figure 2(f)], because when matches the frequency of the target , (where is the spin operator and is the hyperfine strength [76]) and the effect of the spin is removed.
Unambiguous heterodyne sensing. — The idea can be generalized to other settings. Consider the sensing of a multi-frequency signal field with frequencies much larger than the Rabi frequency of the control field. We use GD [see Figure 1(c)] with for the geodesic in Eq. (3) to sense the traverse part .
The relevant Hamiltonian reads
where is the frequency of the qubit and is an unknown fluctuation. For NV qubits, (e.g., with GHz and MHz/G) can be adjusted by changing the magnetic field . The control Hamiltonian has a controllable detuning . In the rotating frame with respect to , we obtain the effective interaction [76]
Under the resonance condition for a signal frequency and when for , picks up the signal only at the frequency .
As exemplified in Figure 3(a), the heterodyne sensing using the CPMG sequences produce multiple dips at (), which implies ambiguity sensor responses especially when happen to be close to the qubit frequency . In contrast, our geodesic driving gives clear signal dips for accurate determination of all the signal frequencies, see Figure 3(b). Our method is also more resilient to dephasing noise (Figure 3) and is more robust against control errors (Figure 4). The robustness can be further enhanced by combining composite pulse techniques [see Figure 4(e) for the result where each pulse is replaced by a Knill pulse [66, 78, 81]].

Figure 3. (a) Quantum heterodyne spectroscopy of a signal field with frequencies kHz by using the protocol in Refs. [43, 44] with the CPMG sequences. could be at the GHz range. The blue solid line (the line with yellow filling) is the simulation with (without) dephasing noise that induces a control-free decoherence time s. The pulse interval is varied to measure the spectrum. Because for each AC signal frequency resonance dips occur whenever , (), the dips at indicated by red vertical arrows are obscured by other resonance dips (vertical lines). Different number of pulses are used for different range of to insure that the sequence times are smaller than 1 ms. (b) [(c)]: As (a) but by using Protocol with fixed ( kHz). All the dips only appear at the right frequencies . See [76] for details of simulation.
Conclusion. — We propose a quantum sensing scheme based on a quantum adiabatic shortcut along a geodesic path. This scheme offers the capability to resolve complex broadband signals and addresses the issues of spectral overlap and spurious signals that arise in existing DD-based quantum sensing methods. Notably, our approach allows for arbitrary frequency resolution through the utilization of synchronized readout techniques. Moreover, it exhibits robustness against control errors and effectively suppresses unwanted decoherence noise. The versatility of our method extends beyond signal detection; it can also be employed for the detection and control of various quantum objects, including single nuclear spins, spin clusters, and mechanical oscillators. Furthermore, our scheme holds promise for applications aimed at mitigating crosstalk in qubit arrays. In summary, our proposed quantum sensing scheme based on a quantum adiabatic shortcut along a geodesic path provides a universal solution for accurate signal detection, offering improved performance over existing methods. Its potential applications encompass a wide range of quantum systems and address key challenges in the field.
Acknowledgments
This work was supported by National Natural Science Foundation of China (Grant No. 12074131), the Natural Science Foundation of Guangdong Province (Grant No. 2021A1515012030), the ERC Synergy grant HyperQ (grant no. 856432) and the BMBF Zukunftscluster QSense: Quantensenoren für die biomedizinische Diagnostik (QMED) (grant no 03ZU1110FF).
References
Spectral responses
Higher harmonic and spurious responses in DD sequences.
Here we provide a background on DD based quantum sensing. Consider the qubit-environment Hamiltonian
A sequence of DD pulses is applied to the qubit, where every pulse aims to flip the qubit and to induce a transformation in the interaction picture with respective to the DD control. Let be the evolution operator driven by the DD control. In the rotating frame of the DD control, becomes
For the idealized situation where the DD sequences use infinitely sharp -shape pulses (where the pulse duration equals 0), with . In realistic experiments the pulses have a nonzero duration because the control has a finite Rabi frequency . In general,
When the pulses have a constant high , . For the control Hamiltonian , we have during the first pulse . A plot of the for a XY8 sequence is shown in Figure S1, and the corresponding Fourier transforms of are shown by the blue lines in Figure S2. Under the ideal situation that there is no control error and that the pulse duration , the modulation factor
Figure S1. XY8 sequence and its induced modulation functions . The pulses of the XY8 sequence have a constant high MHz and a time interval, , between pulses. The value of determines the frequency MHz for sensing.
Figure S2. The power spectrum of () for the XY8 sequence in Figure S1 (blue lines) and for the geodesic evolution with in Figure S3 (orange line). . We choose the same total sequence time for both methods. Both methods have the strongest spectral response for at . For the XY8 sequences, there are also resonances at () due to higher harmonics. The nonzero pulse width also results in complicated spurious peaks appeared in and . For the method of geodesic evolution, only one resonance response exists in a wide range of spectrum. For , we have unambiguous frequency response at , and only tiny higher harmonics appear at , c.f. Figure 1 in the main text. For and , weak resonances appear at , , and .
has harmonics of the frequency for an interpulse spacing of equally spaced DD sequences. For , and can have non-zero values during the pulses and their Fourier transforms have many peaks, which cause spurious signals in quantum sensing.
Quantum sensing by geometric evolution
Here we provide details on the operator dynamics in the rotating frame of the control [Eq. (1)] in the main text with and
Without lost of generality, we assume that , , and with and . In the rotating frame of the evolution , we write
A plot of the for GD is shown in Figure S3. The corresponding Fourier transforms are shown by the yellow lines in Figure S2. One can see that the geodesic evolution removes higher harmonics and spurious responses over a wide frequency band. For the Fourier transform of , we have unambiguous frequency response at given that
Figure S3. The modulation functions induced by the geodesic evolution using GD. The plots show a complete period of . The control field has a Rabi frequency MHz. The control parameters and MHz.
. Tiny higher harmonics only appear at the frequency . For the Fourier transforms of and , weak resonances only appear at . Therefore, one can arbitary remove unwanted spectral respoances via a sufficently large .
When the control realizes the ideal adiabatic evolution [S6–S8], we have
where the difference of dynamic phases increases with time and is a fast oscillating factor with a zero mean. Neglecting terms involving in a way similar to the rotating wave approximation, we obtain Eq. (5) in the main text, i.e.,
and
The operator dynamics can also be analyzed as follows. The control with is used to realize the th pulse which has the propagator . After such pulses, we have
This gives the transformation after pulses, , where . Using the relation , we obtain , where the factor is caused by the phase shifts of the dynamic phases. Neglecting the fast oscillating term in a way similar to the rotating wave approximation, we obtain after pulses . Since , we have .
Sensing of single nuclear spins by GD
Here we provide details of quantum sensing by geometric evolution for the case of sensing of single nuclear spins by a single NV center. The Hamiltonian of a NV electron spin and its surrounding nuclear spins reads
where is the spin- operator for the th nuclear spin, is the gyromagnetic ratio, and describes the hyperfine interaction at the spin location. is a magnetic field with an amplitude and a direction denoted by the unit vector . as in the main text for GD. We has neglected the week nuclear-nuclear coupling in the Hamiltonian because it is much smaller than the electron-nuclear coupling.
The nuclear spins have the effective precession frequency , where is a unit vector. In the rotating frame with respect to , the Hamiltonian becomes
where
, and . Defining , , and , we write with and . In the rotating frame with respect to , the Pauli operator becomes
where are oscillating factors. See Figure S3 and Figure S1 for exemplified plots for GD and XY8 sequences, respectively. For the case of GD,
in the relevant frequency range. With a sufficiently large ,
Therefore, when for the th spin and assuming that and are much smaller than the differences between and other , we obtain
where the qubit sensor couples to only one nucler spin.
Heterodyne sensing by GD
We consider a single-qubit sensor exposed to a high-frequency signal field and a dephasing noise , with the Hamiltonian
where and . Adding a control with a detuning , the total Hamiltonian is . In the rotating frame with respect to , the Hamiltonian becomes
where
The control part realizes a sequence of pulses for accelerated quantum adiabatic evolution along the geodesic and prolongs the coherence time of the qubit by suppressing the nosie in a way similar to DD [70]. On the other hand, is a fast oscillating field at a frequency much larger than the Rabi frequency . Therefore, the effect of the term can be neglected. Similar to Eq. (17) in § 1.5 B, in the rotating frame of , and , which implies
Therefore, in the rotating frame of , we obtain the effective Hamiltonian
When the frequency of control matches a signal frequency , i.e.,
and the signal is weak , the qubit sensor extracts the signal at this frequency with the Hamiltonian
by applying the rotating wave approximation.
For a state after the control of a duration , the population remaining at the initial state is . For the resonant case , , while for the offresonant case, .
Simulation details
AC field sensing
The AC field used for Figure 2 (a)-(Figure 2b) of the main text is , where , , and .
Without control errors and dephasing noise, the Hamiltonian for the simulation reads . For the XY8 sequences, when applying () pulses (see Figure S1 for the pulse sequence). For GD, . In the simulations of both protocols, we choose for the Rabi frequency during the pulses when there is no control errors. In GD, we use the detuning of the control for the th pulse according to the ideal value of . For the sensing using XY8 sequences, we use the resonant frequency at the 1st harmonic to detect the signal, and we repeat the XY8 unit 16 times implying the whole XY8 sequence has pulses and a total duration . To compare the results for the same sequence duration , we apply cycles of the cyclic evolution when we use the GD (with ). In both protocols the qubit is initially prepared in the superposition state and we measure the population remaining at the initial state as the signal.
For the results with dephasing noise and control errors, we add a noise term to and an amplitude fluctuation to the Rabi frequency in both protocols. is modeled by a stochastic Ornstein-Uhlenbeck (OU) process [S5] with a correlation time and a standard deviation [43], which gives a decoherence time , i.e., a time when the phase coherence decays to of its original value in the absence of quantum control. In the modeling of the control fluctuation, we change the value of to , where the static bias and the time-dependent fluctuation is modeled by a stochastic OU process with a correlation time of 1 ms and a standard deviation [S1]. The results are the average of 6500 Monte Carlo simulations. The initial state is , and we measure the population remaining at the initial state as the signal.
Arbitrary high-resolution spectroscopy
Combining the sensing sequences with the method of synchronized readout [S3, S4] can improve the spectral resolution. In the simulations for Figure 2 (c) and (Figure 2d) of the main text, we use the same AC field with , , and sequence parameters , , , and as in Sec. II A.
We repeatedly apply the same sequence (each has the duration ) for times to obtain the synchronized readout signals [see the lower panel of Figure 1(a) in the main text]. At the end of each sequence we make a projection measurement and record the measured values. There is a delay of for readout and initialization between the end of a sequence and the starting time of its subsequent sequence. The readout process at the end of the th sequence yields at the moment a random photon number , where Pois denotes a Poisson process and is a Bernoulli process that takes the value 1 with a probability of and the value 0 with probability [S3]. We initialize the qubit sensor at the state before each sequence. The probability is the population signal of finding the qubit in the state at the end of the sequence. We choose , , and with according to the parameters in Ref. [S3]. A discrete Fourier transform of the photon numbers results in the power spectrum shown in Figure 2 (c) and (Figure 2d). Here is a fixed scaling factor for all the protocols.
Sensing of single nuclear spins
In Figure 2 (e) and (Figure 2f) of the main text for the sensing of a proton spin, we perform the simulations by using the Hamiltonian Eq. (19). The control as in the main text for GD. For the XY8 sequences, (). The parameters for the proton spin are , , and . We assume that one nucleus (with a natural abundance 1.1% and ) in the diamond is coupled to the NV with and . The magnetic field . The Rabi frequency for the NV is . The XY8 sequence is repeated 50 times for a total number of pulses. We change to include detuning error. We set as it is the typical error due to unpolarized nitrogen spin of the NV center. An amplitude error will change to , where we set . The initial state of the nuclear spins are assumed to be in a room-temperature thermal state. We measure the population of the NV qubit sensor remaining at its initial state as the signal.
High-frequency AC field sensing
In Figure 3 of the main text, the signal field has the transverse component . In the simulation, , with the corresponding . The angles and phases are random real numbers. The control field has a Rabi frequency . For the results with dephasing noise , in each run of the simulation we model by a OU process with a correlation time and a standard deviation for a decoherence time . The results are the average of Monte Carlo simulations.
For the heterodyne spectroscopy using CPMG sequences, the initial state is the superposition state and the population remained at is the measured signal.
For the heterodyne spectroscopy using GD, the initial state is . For the case of NV center, is the state after optical illumination and we do not need to use the initial pulse to prepare the qubit state. We measure the population remained at as the signal. There are 16 cycles of geodesic evolution where for each cycle there are pulses.
Robustness and Combination with composite pulses
In Figure 4 of the main text we demonstrate the control robustness in the absence of signals. A Rabi frequency MHz is used for the simulations. For DD sequences (CPMG and XY8 sequences) we choose pulses for each sequence and the pulse interval satisfies MHz. Therefore each DD sequence has a time length s. For the protocols of geodesic driving, we use MHz for the same sensing frequency as DD, , and the same s. To investigate the robustness of the protocols, we change the Rabi frequency to by adding a relative fluctuation, and add a detuning error (i.e., adding to the qubit Hamiltonian). We denote the actual evolution realized by the sequences in the presence of control errors. In the absence of control errors, the ideal evolution after the sequence is an identity operator, . The control fidelity is calculated in the standard way as [S9]
References
- [1]J. Preskill, Quantum Computing in the NISQ era and beyond, Quantum 2, 79 (2018).
- [2]E. Paladino, Y. M. Galperin, G. Falci, and B. L. Altshuler, 1/f noise: Implications for solid-state quantum information, Rev. Mod. Phys. 86, 361 (2014).DOI
- [3]C. L. Degen, F. Reinhard, and P. Cappellaro, Quantum sensing, Rev. Mod. Phys. 89, 035002 (2017).
- [4]J. F. Barry, J. M. Schloss, E. Bauch, M. J. Turner, C. A. Hart, L. M. Pham, and R. L. Walsworth, Sensitivity optimization for NV-diamond magnetometry, Rev. Mod. Phys. 92, 015004 (2020).DOI
- [5]L. Viola, E. Knill, and S. Lloyd, Dynamical decoupling of open quantum systems, Phys. Rev. Lett. 82, 2417 (1999).
- [6]W. Yang, Z.-Y. Wang, and R.-B. Liu, Preserving qubit coherence by dynamical decoupling, Front. Phys. 6, 2 (2011).
- [7]C. Munuera-Javaloy, R. Puebla, and J. Casanova, Dynamical decoupling methods in nanoscale NMR, Europhys. Lett. 134, 30001 (2021).
- [8]M. W. Doherty, N. B. Manson, P. Delaney, F. Jelezko, J. Wrachtrup, and L. C. Hollenberg, The Nitrogen-Vacancy Colour Centre in Diamond, Phys. Rep. 528, 1 (2013).
- [9]Y. Wu, F. Jelezko, M.B. Plenio, and T. Weil, Diamond Quantum Devices in Biology, Angewandte Chemie – International Edition 55, 6586 – 6598 (2016).
- [10]J. R. Weber, W. F. Koehl, J. B. Varley, A. Janotti, B. B. Buckley, C. G. Van de Walle, D. D. Awschalom, Quantum computing with defects. Proc. Natl. Acad. Sci. U.S.A. 107, 8513–8518 (2010).
- [11]S. Kolkowitz, Q. P. Unterreithmeier, S. D. Bennett, and M. D. Lukin, Sensing Distant Nuclear Spins with a Single Electron Spin, Phys. Rev. Lett. 109, 137601 (2012).
- [12]N. Zhao, J. Honert, B. Schmid, M. Klas, J. Isoya, M. Markham, D. Twitchen, F. Jelezko, R. B. Liu, H. Fedder, and J. Wrachtrup, Sensing single remote nuclear spins, Nat. Nanotechnol. 7, 657 (2012).DOI
- [13]T. Staudacher, F. Shi, S. Pezzagna, J. Meijer, J. Du, C. A. Meriles, F. Reinhard, and J. Wrachtrup, Nuclear Magnetic Resonance Spectroscopy on a <5-Nanometer3 Sample Volume, Science 339, 561 (2013).
- [14]C. Müller, X. Kong, J.-M. Cai, K. Melentijević, A. Stacey, M. Markham, D. Twitchen, J. Isoya, S. Pezzagna, J. Meijer, J. Du, M. B. Plenio, B. Naydenov, L. P. McGuinness, and F. Jelezko, Nuclear magnetic resonance spectroscopy with single spin sensitivity, Nat. Commun. 5, 4703 (2014).DOI
- [15]D. Rugar, H. J. Mamin, M. H. Sherwood, M. Kim, C. T. Rettner, K. Ohno, and D. D. Awschalom, Proton magnetic resonance imaging using a nitrogen-vacancy spin sensor, Nat. Nanotechnol. 10, 120 (2015).DOI
- [16](2015).DOI
- [17]D. R. Glenn, D. B. Bucher, J. Lee, M. D. Lukin, H. Park, R. L. Walsworth, High-resolution magnetic resonance spectroscopy using a solid-state spin sensor. Nature 555, 351–354 (2018).
- [18]E. Lang, J. Casanova, Z.-Y. Wang, M. B. Plenio, and T. S. Monteiro, Enhanced Resolution in Nanoscale NMR via Quantum Sensing with Pulses of Finite Duration, Phys. Rev. Applied 7, 054009 (2017).DOI
- [19]M. Pfender, P. Wang, H. Sumiya, S. Onoda, W. Yang, D. B. Rao Dasari, P. Neumann, X.-Y. Pan, J. Isoya, R.-B. Liu, and J. Wachtrup, High-resolution spectroscopy of single nuclear spins via sequential weak measurements, Nat. Commun. 10, 594 (2019).DOI
- [20]D. B. Bucher, D. P. L. Aude Craik, M. P. Backlund, M. J. Turner, O. Ben Dor, D. R. Glenn, R. L. Walsworth, Quantum diamond spectrometer for nanoscale NMR and ESR spectroscopy. Nat. Protoc. 14, 2707–2747 (2019).DOI
- [21]J. Casanova, E. Torrontegui, M. B. Plenio, J. J. García-Ripoll, and E. Solano, Modulated Continuous Wave Control for Energy-Efficient Electron-Nuclear Spin Coupling, Phys. Rev. Lett. 122, 010407 (2019).
- [22]N. Aharon, I. Schwartz, and A. Retzker, Quantum Control and Sensing of Nuclear Spins by Electron Spins under Power Limitations, Phys. Rev. Lett. 122, 120403 (2019).DOI
- [23]C. Munuera-Javaloy, Y. Ban, X. Chen, and J. Casanova, Robust Detection of High-Frequency Signals at the Nanoscale, Phys. Rev. Appl. 14, 054054 (2020).DOI
- [24]J. Meinel, V. Vorobyov, P. Wang, B. Yavkin, M. Pfender, H. Sumiya, S. Onoda, J. Isoya, R.-B. Liu, and J. Wachtrup, Quantum nonlinear spectroscopy of single nuclear spins, Nat. Commun. 13, 5318 (2022).
- [25]P. Wang, W. Yang, and R. Liu, Using Weak Measurements to Synthesize Projective Measurement of Nonconserved Observables of Weakly Coupled Nuclear Spins, Phys. Rev. Applied 19, 054037 (2023).DOI
- [26]C. Munuera-Javaloy, A. Tobalina, and J. Casanova, High-Resolution NMR Spectroscopy at Large Fields with Nitrogen Vacancy Centers, Phys. Rev. Lett. 130, 133603 (2023).
- [27]F. Shi, Q. Zhang, P. Wang, H. Sun, J. Wang, X. Rong, M. Chen, C. Ju, F. Reinhard, H. Chen, J. Wachtrup, J. Wang, and J. Du, Single-protein spin resonance spectroscopy under ambient conditions, Science 347, 1135 (2015).DOI
- [28]I. Lovchinsky, A. O. Sushkov, E. Urbach, N. P. de Leon, S. Choi, K. De Greve, R. Evans, R. Gertner, E. Bersin, C. Müller, L. McGuinness, F. Jelezko, R. L. Walsworth, H. Park, M. D. Lukin, Nuclear magnetic resonance detection and spectroscopy of single proteins using quantum logic. Science 351, 836 (2016).
- [29]C. Munuera-Javaloy, R. Puebla, B. D. Anjou, M. B. Plenio, and J. Casanova, Detection of molecular transitions with nitrogen-vacancy centers and electron-spin la- bels, npj Quantum Inf. 8, 140 (2022).DOI
- [30]N. Zhao, J.-L. Hu, S.-W. Ho, J. T. K. Wan, and R. B. Liu, Atomic-scale magnetometry of distant nuclear spin clusters via nitrogen-vacancy spin in diamond, Nat. Nanotechnol. 6, 242 (2011).DOI
- [31]F. Shi, X. Kong, P. Wang, F. Kong, N. Zhao, R. B. Liu, and J. Du, Sensing and Atomic-Scale Structure Analysis of Single Nuclear-Spin Clusters in Diamond, Nat. Phys. 10, 21 (2014).
- [32]J. E. Lang, R. B. Liu, and T. S. Monteiro, Dynamical Decoupling-Based Quantum Sensing: Floquet Spectroscopy, Phys. Rev. X 5, 041016 (2015).DOI
- [33]Z.-Y. Wang, J. F. Haase, J. Casanova, and M. B. Plenio, Positioning nuclear spins in interacting clusters for quantum technologies and bioimaging, Phys. Rev. B 93, 174104 (2016).DOI
- [34]K. Sasaki, K. M. Itoh, and E. Abe, Determination of the position of a single nuclear spin from free nuclear precessions detected by a solid-state quantum sensor, Phys. Rev. B 98, 121405(R) (2018).
- [35]J. Zopes, K. S. Cujia, K. Sasaki, J. M. Boss, K. M. Itoh, and C. L. Degen, Three-dimensional localization spectroscopy of individual nuclear spins with sub-Angstrom resolution, Nat. Commun. 9, 4678 (2018).DOI
- [36]J. Zopes, K. Herb, K. S. Cujia, and C. L. Degen, Three Dimensional Nuclear Spin Positioning Using Coherent Radio-Frequency Control, Phys. Rev. Lett. 121, 170801 (2018).DOI
- [37]M. H. Abobeih, J. Randall, C. E. Bradley, H. P. Bartling, M. A. Bakker, M. J. Degen, M. Markham, D. J. Twitchen, and T. H. Tamminiau, Atomic-scale imaging of a 27-nuclear-spin cluster using a quantum sensor, Nature 576, 411 (2019).
- [38]K. S. Cujia, K. Herb, J. Zopes, J. M. Abendroth, and C. L. Degen, Parallel detection and spatial mapping of large nuclear spin clusters, Nat. Commun. 13 1260 (2022).DOI
- [39]S. Schmitt, T. Gefen, F. M. Stürner, T. Unden, G. Wolff, C. Müller, J. Scheuer, B. Naydenov, M. Markham, S. Pezzagna, J. Meijer, I. Schwarz, M. Plenio, A. Retzker, L. P. McGuinness, and F. Jelezko, Submillihertz magnetic spectroscopy performed with a nanoscale quantum sensor, Science 356, 832 (2017).
- [40]J. M. Boss, K. S. Cujia, J. Zopes, and C. L. Degen, Quantum sensing with arbitrary frequency resolution, Science 356, 837 (2017).DOI
- [41]T. Joas, A. M. Waeber, G. Braunbeck, and F. Reinhard, Quantum sensing of weak radio-frequency signals by pulsed Mollow absorption spectroscopy, Nat. Commun. 8, 964 (2017).DOI
- [42]A. Stark, N. Aharon, T. Unden, D. Louzon, A. Huck, A. Retzker, U. L. Andersen, and F. Jelezko, Narrow-bandwidth sensing of high-frequency fields with continuous dynamical decoupling, Nat. Commun. 8, 1105 (2017).DOI
- [43]Y. Chu, P. Yang, M. Gong, M. Yu, B. Yu, M. B. Plenio, A. Retzker, and J. Cai, Precise Spectroscopy of High-Frequency Oscillating Fields with a Single-Qubit Sensor, Phys. Rev. Applied 15, 014031 (2021).DOI
- [44]J. Meinel, V. Vorobyov, B. Yavkin, D. Dasari, H. Sumiya, S. Onoda, J. Isoya, and J. Wrachtrup, Heterodyne sensing of microwaves with a quantum sensor, Nat. Commun. 12, 1 (2021).
- [45]G. Wang, Y.-X. Liu, J. M. Schloss, S. T. Alsid, D. A. Braje, and P. Cappellaro, Sensing of Arbitrary-Frequency Fields Using a Quantum Mixer, Phys. Rev. X 12, 021061 (2022).DOI
- [46]Z. Jiang, H. Cai, R. Cernansky, X. Liu, and W. Gao, Quantum sensing of radio-frequency signal with NV centers in SiC, Sci. Adv. 9, eadg2080 (2023).DOI
- [47]T. H. Taminiau, J. T. W. Wagenaar, T. van der Sar, F. Jelezko, V. V. Dobrovitski, and R. Hanson, Detection and Control of Individual Nuclear Spins using a Weakly Coupled Electron Spin, Phys. Rev. Lett. 109, 137602 (2012).
- [48]Z.-Y. Wang, J. Casanova, and M. B. Plenio, Delayed entanglement echo for individual control of a large number of nuclear spins, Nat. Commun. 8, 14660 (2017).DOI
- [49]J. F. Haase, Z.-Y. Wang, J. Casanova, and M. B. Plenio, Soft quantum control for highly selective interactions among joint quantum systems, Phys. Rev. Lett. 121, 050402 (2018).
- [50]M. A. Perlin, Z.-Y. Wang, J. Casanova, and M. B. Plenio, Noise-resilient architecture of a hybrid electron-nuclear quantum register in diamond, Quantum Sci. Technol. 4, 015007 (2019).DOI
- [51]S. S. Hegde, J. Zhang, and D. Suter, Efficient quantum states for individual nuclear spin qubits by indirect control, Phys. Rev. Lett. 124, 220501 (2020).DOI
- [52]H. P. Bartling, M. H. Abobeih, B. Pingault, M.J. Degen, S. J. H. Loenen, C. E. Bradley, J. Randall, M. Markham, D. J. Twitchen, and T. H. Taminiau, Entanglement of Spin-Pair Qubits with Intrinsic Dephasing Times Exceeding a Minute, Phys. Rev. X 12, 011048 (2022).DOI
- [53]J. Casanova, Z.-Y. Wang, and M. B. Plenio, Noise-Resilient Quantum Computing with a Nitrogen-Vacancy Center and Nuclear Spins, Phys. Rev. Lett. 117, 130502 (2016).
- [54]S. Pezzagna and J. Meijer, Quantum computer based on color centers in diamond, Appl. Phys. Rev. 8, 011308 (2021).
- [55]J. Cai, A. Retzker, F. Jelezko, and M. B. Plenio, A largescale quantum simulator on a diamond surface at room temperature, Nat. Phys. 9, 168 (2013).
- [56]L. Childress and R. Hanson, Diamond NV centers for quantum computing and quantum networks, MRS Bull. 38, 134 (2013).
- [57]N. Kalb, A. A. Reiserer, P. C. Humphreys, J. J. W. Bakermans, S. J. Kamerling, N. H. Nickerson, S. C. Benjamin, D. J. Twitchen, M. Markham, and R. Hanson, Entanglement Distillation between Solid-State Quantum Network Nodes, Science 356, 928 (2017).DOI
- [58]P. C. Humphreys, N. Kalb, J. P. J. Morits, R. N. Schouten, R. F. L. Vermeulen, D. J. Twitchen, M. Markham, and R. Hanson, Deterministic delivery of remote entanglement on a quantum network, Nature (London) 558, 268 (2018).
- [59]M. Pompili, S. L. N. Hermans, S. Baier, H. K. C. Beukers, P. C. Humphreys, R. N. Schouten, R. F. L. Vermeulen, M. J. T. Tiggelen, L. dos Santos Martins, B. Dirksе, S. Wehner, and R. Hanson, Realization of a Multinode Quantum Network of Remote Solid-State Qubits, Science 372, 259 (2021).DOI
- [60]H. Y. Carr and E. M. Purcell, Effects of diffusion on free precession in nuclear magnetic resonance experiments, Phys. Rev. 94, 630 (1954).
- [61]S. Meiboom and D. Gill, Modified spin-echo method for measuring nuclear relaxation times, Rev. Sci. Instrum. 29, 688 (1958).
- [62]T. Gullion, D. B. Baker, and M. S. Conradi, New, compensated Carr-Purcell sequences, J. Magn. Reson. 89, 479 (1990).
- [63]M. Loretz, J. M. Boss, T. Rosskopf, H. J. Mamin, D. Rugar, and C. L. Degen, Spurious Harmonic Response of Multipulse Quantum Sensing Sequences, Phys. Rev. X 5, 021009 (2015).DOI
- [64]V. M. Frey, S. Mavadia, L. M. Norris, W. de Ferranti, D. Lucarelli, L. Viola, and M. J. Biercuk, Application of optimal band-limited control protocols to quantum noise sensing, Nat. Commun. 8, 2189 (2017).
- [65]N. Zhao, J. Wrachtrup, and R.-B. Liu, Dynamical decoupling design for identifying weakly coupled nuclear spins in a bath, Phys. Rev. A 90, 032319 (2014).
- [66]J. Casanova, Z.-Y. Wang, J. F. Haase, and M. B. Plenio, Robust dynamical decoupling sequences for individual nuclear-spin addressing, Phys. Rev. A 92, 042304 (2015).
- [67]Z.-Y. Wang, J. E. Lang, S. Schmitt, J. Lang, J. Casanova, L. McGuinness, T. S. Monteiro, F. Jelezko, and M. B. Plenio, Randomization of Pulse Phases for Unambiguous and Robust Quantum Sensing, Phys. Rev. Lett. 122, 200403 (2019).
- [68]Z.-Y. Wang, J. Casanova, and M. B. Plenio, Enhancing the Robustness of Dynamical Decoupling Sequences with Correlated Random Phases, Symmetry 12, 730 (2020).
- [69]Z.-Y. Wang and M. B. Plenio, Necessary and sufficient condition for quantum adiabatic evolution by unitary control fields, Phys. Rev. A 93, 052107 (2016).
- [70]K. Xu, T. Xie, F. Shi, Z.-Y. Wang, X. Xu, P. Wang, Y. Wang, M. B. Plenio, and J. Du, Breaking the quantum adiabatic speed limit by jumping along geodesics, Sci. Adv. 5, eaax3800 (2019).
- [71]Y. Liu and Z.-Y. Wang, Shortcuts to adiabaticity with inherent robustness and without auxiliary control, arXiv:2211.02543.arxiv.org/abs/2211.02543
- [72]M. G. Gong, M. Yu, R. Betzholz, Y. Chu, P. Yang, Z. Wang, and J. Cai, Accelerated quantum control in a three-level system by jumping along the geodesics, Phys. Rev. A 107, L040602 (2023).
- [73]M. V. Berry, Transitionless quantum driving, J. Phys. A: Math. Theor. 42, 365303 (2009).
- [74]D. Géúry-Odelin, A. Ruschhaupt, A. Kiely, E. Torrentégui, S. Marínez-Garaot, and J. G. Muga, Shortcuts to adiabaticity: Concepts, methods, and applications, Rev. Mod. Phys. 91, 045001 (2019).
- [75]D. Chruscinski, A. Jamiolkowski, Geometric Phases in Classical and Quantum Mechanics (Birkhäuser, 2004).
- [76]See Supplemental Material at [URL] for additional information.
- [77]L. Cywiński, R. M. Lutchyn, C. P. Nave, and S. Das Sarma, How to enhance dephasing time in superconducting qubits, Phys. Rev. B 77, 174509 (2008).
- [78]C. A. Ryan, J. S. Hodges, and D. G. Cory, Robust Decoupling Techniques to Extend Quantum Coherence in Diamond, Phys. Rev. Lett. 105, 204002 (2010).
- [79]G. T. Genov, D. Schrafft, N. V. Vitanov, and T. Halfmann, Arbitrarily Accurate Pulse Sequences for Robust Dynamical Decoupling, Phys. Rev. Lett. 118, 133202 (2017).
- [80]G. A. Alvarez and D. Suter, Measuring the spectrum of colored noise by dynamical decoupling, Phys. Rev. Lett. 107, 230501 (2011).
- [81]R. Tycko and A. Pines, Iterative schemes for broad-band and narrow-band population inversion in NMR, Chem. Phys. Lett. 111, 462 (1984).



