betaFeedback

WorksMathematics

Nonlocal Electrostatics and Boundary Charges in Continuum Limits of Two-Dimensional Materials

Abstract

Two-dimensional (2D) electronic materials are of significant technological interest due to their exceptional properties and broad applicability in engineering. The transition from nanoscale physics, that dictates their stable configurations, to macroscopic engineering applications requires the use of multiscale methods to systematically capture their electronic properties at larger scales. A key challenge in coarse-graining is the rapid and near-periodic variation of the charge density, which exhibits significant spatial oscillations at the atomic scale. Therefore, the polarization density field – the first moment of the charge density over the periodic unit cell – is used as a multiscale mediator that enables efficient coarse-graining by exploiting the almost-periodic nature of the variation. Unlike the highly oscillatory charge density, the polarization varies over lengthscales that are much larger than the atomic, making it suitable for continuum modeling. In this paper, we investigate the electrostatic potential arising from the charge distribution of 2D materials. Specifically, we consider a sequence of problems wherein the underlying lattice spacing vanishes and thus obtain the continuum limit. We consider 3 distinct limits: where the thickness is much smaller than, comparable to, and much larger than the in-plane lattice spacing. These limiting procedures provide the homogenized potential expressed in terms of the boundary charge and dipole distribution, subject to the appropriate boundary conditions that are also obtained through the limit process. Further, we demonstrate that despite the intrinsic non-uniqueness in the definition of polarization, accounting for the boundary charges ensures that the total electrostatic potential, the associated electric field, and the corresponding energy of the homogenized system are uniquely determined.

Introduction

Two-dimensional (2D) materials have been the focus of significant interest since the isolation of graphene in 2004 [19]. These materials exhibit unique electronic, mechanical, and optical properties, making them highly promising for a wide range of technological applications. In particular, 2D materials are being explored for energy-harvesting devices such as flexoelectric and piezoelectric nanogenerators [WWL^{+}14, LPC^{+}17], triboelectric nanogenerators [ZLW^{+}15, PdRCL^{+}23, GKK^{+}22], actuation systems [WHZ^{+}16], piezotronics [WNV13, XZF^{+}15, PWZ^{+}13, ZCZP21], and non-volatile random access memory [WWZ^{+}23]. Moreover, these materials hold great promise for exhibiting strong flexoelectric responses due to their ability to sustain large strain gradients through bending deformations [LDW^{+}24, SS23]. These materials have been utilized in a diverse range of applications, including but not limited to flexible electronics, optoelectronic devices, field-effect transistors (FETs), sensors, ultrafast lasers, batteries, and supercapacitors [GRV^{+}20, KJM^{+}23, LA16, LTY^{+}23]. A notable aspect of two-dimensional (2D) materials is their ability to exhibit large strain gradients, which can induce significant flexoelectric responses. From an application perspective, these materials hold considerable promise for the development of advanced sensors and energy harvesting devices.

The functional response of these materials (also for bulk 3D materials) at the continuum lengthscale is typically described by the polarization, which serves as a multiscale mediator that captures key aspects of the atomic-scale charge distribution [27, 76, 25, 28, 65, 21, 17, 16, 42 CDZ^{+}09, 5, 2, 54, 16, 17 GDdP22, 59]. The role of polarization in piezoelectric and ferroelectric phenomena has been the focus of extensive research: e.g., in bulk ferroelectrics [23, 11, 24 TKT22, 70]; in fundamental studies of polarization [61, 60 TVV^{+}13]; in phase-transforming settings [7, 29 NPB^{+}18, SRD^{+}24, 26 CC1^{+}11]; in functional composites [45 BDM^{+}13, 47]; through continuum phase-field modeling [51, 71, 81, 13 LZY^{+}16, ZPT^{+}, 49, 68]; in low-dimensional nanostructures [78 TDK^{+}20, 28, 25]; in biomembranes [57, 44, 43]; and flexoelectricity [39, 75, 33 APM^{+}14, 1, 8].

An important issue is that the polarization, defined as the dipole moment per unit cell, is inherently non-unique due to the arbitrary choice of the unit cell. Consequently, different selections of the unit cell yield distinct dipole moments (including reversing direction). Since polarization serves as a fundamental multiscale descriptor of the electronic behavior in continuum models, its non-uniqueness poses challenges to the consistency of continuum models. Various approaches have been proposed to address this issue. A widely adopted framework within the physics community is the Modern Theory of Polarization [RV07, Van18, KSV93, VKS93], which introduces an alternative definition of polarization through the change in the Berry phase of the wavefunction during an adiabatic process. The central assertion is that, while polarization itself is non-unique, the change in polarization is uniquely defined modulo a polarization quantum. The assumption of adiabaticity implies that eigenstates remain unchanged throughout the transition, allowing one to obtain an expression for the electric current using the eigenstates at equilibrium. This approach circumvents the issue of non-uniqueness inherent in defining polarization as the dipole moment per unit cell. By expressing polarization in terms of its change rather than its absolute value, this approach ensures well-defined values modulo the polarization quantum. An alternative approach, popular in the continuum mechanics community, defines polarization as the energy conjugate to the electric field [63]. Both, by definition, yield unique values.

In prior work [53, 58, 59], we addressed the non-uniqueness in polarization from a classical perspective (dipole moment per unit cell definition). We demonstrated that for every choice of polarization, there exists a corresponding surface charge density. Different choices of polarization in the bulk produce different choices of surface charge density on the boundary. Together, these quantities compensate each other to yield unique potentials, fields, and energies. We showed in [59] how the different definitions of polarization were connected.

Contributions of this work. This work aims to derive a series of polarization theorems for two-dimensional (2D) materials. We consider the electrostatic (Poisson) equation for a charge distribution supported on a thin film, and analyze the limit of vanishing thickness and lattice spacing. Previously, we addressed the non-uniqueness of polarization for 3D materials [59, 53], by examining a sequence of Poisson equations associated with a corresponding sequence of charge distributions defined on a lattice. By appropriately scaling the charge distribution, we derived a homogenized Poisson equation posed with respect to the polarization. Analyzing this limit provides a resolution to the issue of polarization non-uniqueness.

In this paper, we follow a similar approach to investigate the non-uniqueness of polarization. Given two scaling parameters — ll for the lattice and hh for the thickness — we explore different asymptotic regimes: (i) l≪h→0l \ll h \to0, (ii) l≈h→0l \approx h \to0, and (iii) h≪l→0h \ll l \to0. We demonstrate that, in the limit, the surface charge compensates for the tangential polarization 2, while the normal polarization gives rise to a double-layer potential. The homogenized or coarse-grained problem enables us to replace the full problem real with its homogenized limit which is significantly more tractable for analysis and numerical approximation given that the polarization varies on scales much larger than atomic.

The sequence of Poisson equations that we analyze are:

−ΔΦl,h=ρl,h1Ω×(−h,h)in R3-\Delta\Phi_{l,h}=\rho_{l,h}\mathbf{1}_{\Omega\times(-h,h)}\quad\text{in }\mathbb{R}^{3}
Φl,h(r)=0as ∣r∣→∞,(1)\Phi_{l,h}(\boldsymbol{r})=0\quad\text{as }|\boldsymbol{r}|\to\infty, \tag*{(1)}

where the charge distribution is parameterized by ll and hh. We are interested in the limit that l,h→0l,h\to0. Since these parameters can vary independently, we aim to investigate different asymptotic regimes based on the relative scaling of ll and hh.

In the limit l≪h→0l\ll h\to0, with ρl,h=ρ~l,hlh\rho_{l,h}=\frac{\tilde{\rho}_{l,h}}{lh}, the asymptotic behavior of (1.1) is characterized by the following limit:

−ΔΦ0=(q−div⁡S(J0pp)J0)1Ω+1∂Ω(σ+pp⋅n)in R3-\Delta\Phi_{0}=\left(q-\frac{\operatorname{div}_{S}(J_{0}p_{p})}{J_{0}}\right)\mathbf{1}_{\Omega}+\mathbf{1}_{\partial\Omega}\left(\sigma+p_{p}\cdot n\right)\quad\text{in }\mathbb{R}^{3}
Φ0(r)=0as ∣r∣→∞.(2)\Phi_{0}(\boldsymbol{r})=0\quad\text{as }|\boldsymbol{r}|\to\infty. \tag*{(2)}

where div⁡S\operatorname{div}_{S} is the surface divergence, J0J_{0} is the surface Jacobian associated with the manifold Ω\Omega, ppp_{p} is the tangential or planar polarization, qq is the free charge, σ\sigma is the surface charge distribution and nn is normal to ∂Ω\partial\Omega and tangent to Ω\Omega.

In the limit h≪l→0h\ll l\to0, with ρl,h=ρ~l,hh2\rho_{l,h}=\frac{\tilde{\rho}_{l,h}}{h^{2}}, the asymptotic behavior of (1.1) is characterized by the following limit:

−ΔΦ0=q+p3∂1Ω∂νin R3-\Delta\Phi_{0}=q+p_{3}\frac{\partial\mathbf{1}_{\Omega}}{\partial\nu}\quad\text{in }\mathbb{R}^{3}
Φ0(r)=0as ∣r∣→∞.(3)\Phi_{0}(\boldsymbol{r})=0\quad\text{as }|\boldsymbol{r}|\to\infty. \tag*{(3)}

where qq is the free charge and p3p_{3} is the normal polarization. Here ν\nu is the direction normal to the manifold.

Finally, in the limit h≈αl→0h \approx\alpha l \to0, with ρ~l=ρ~l2\widetilde{\rho}_l = \frac{\widetilde{\rho}}{l^2}, the corresponding limit of (1.1) is given by:

−ΔΦ0=α(q−div⁡S(J0pp)J0)1Ω+α2p3∂1Ω∂ν+1∂Ωα(σ+pp⋅n)in R3(4)-\Delta\Phi_0 = \alpha\left(q - \frac{\operatorname{div}_{S}(J_0 \mathbf{p}_p)}{J_0}\right)1_{\Omega} + \alpha^2 p_3 \frac{\partial1_{\Omega}}{\partial\nu} + 1_{\partial\Omega}\alpha\left(\sigma+ \mathbf{p}_p \cdot\mathbf{n}\right) \quad\text{in } \mathbb{R}^3 \tag*{(4)}
Φ0(r)=0as ∣r∣→∞.\Phi_0(\mathbf{r}) = 0 \quad\text{as } |\mathbf{r}| \to\infty.

where div⁡S\operatorname{div}_{S} is the surface divergence, J0J_0 is the surface Jacobian associated with the manifold Ω\Omega, pp\mathbf{p}_p is the tangential polarization, p3p_3 is the normal polarization, qq is the free charge, σ\sigma is the surface charge, n\mathbf{n} is normal to ∂Ω\partial\Omega and tangent to Ω\Omega and ν\nu is the normal to Ω\Omega.

The results can be understood by observing that the normal component of the polarization remains uniquely defined and contributes to the formation of a double-layer potential, whereas the tangential component, along with the free charge, compensates for the surface charge distribution. Free charge typically arises in scenarios where there is a deviation from charge-neutral unit cells. Consequently, in cases where no free charge is present, the surface charge compensates for the non-uniqueness of polarization in the bulk. This distinction arises from the inherent non-uniqueness in the choice of the unit cell within the plane.

Organization. This paper is organized as follows. In Section 2, we summarize the notation and fundamental definitions used throughout the paper. In Section 3, we present a heuristic understanding of the results in this paper. The problem is formulated in Section 4. Section 5 presents the homogenization theorem 5.1 that serves as a key component in the derivation of our main results. The proof of theorem 5.1 is divided into three parts one for each asymptotic regime. We address l≪hl \ll h in Section 5.A, l≈hl \approx h in 5.B and h≪lh \ll l in Section 5.C. We discuss the resolution of the non-uniqueness of the polarization field in Section 6. Appendix A provides the derivation of the double layer potential.

Notation

We first present a summary of all the notations used throughout the paper for the readers to refer to:

  • Z\mathbb{Z} — The set of integers.

  • R\mathbb{R} — The set of real numbers. Further, R>0\mathbb{R}_{>0} and R<0\mathbb{R}_{<0} represent the strictly positive and strictly negative subset.

  • Rn\mathbb{R}^n — R×R×R×…×R\mathbb{R} \times\mathbb{R} \times\mathbb{R} \times\ldots\times\mathbb{R}. The cartesian product of nn copies of the set of real numbers R\mathbb{R}.

  • Cr(X,Y)C^r(X,Y) — The space of continuous functions f:X→Yf:X \to Y with continuous first rr derivatives.

  • C0(X,Y)C_0(X,Y) — The space of compactly supported continuous functions f:X→Yf:X \to Y.

  • {}\{\} — The null set.

  • P⊕QP \oplus Q — Minkowski sum of two sets P,Q⊂RnP,Q \subset\mathbb{R}^n as {w∈Rn∣∃p∈P,q∈Q such that w=p+q}\{w \in\mathbb{R}^n \mid\exists p \in P, q \in Q \text{ such that } w = p + q\}.

  • Brn(x)B_r^n(x) — Ball of radius rr centered at xx in dimension nn.

  • l□l\Box — Denotes scaled unit cell of dimensions l×ll \times l.

  • □≡l□∣l=1\Box\equiv l\Box\big|_{l=1} — A unit cell.

  • T(l□)T(l\Box) — The set of all l×ll \times l cells contained in T⊂R2T \subset\mathbb{R}^2.

  • lΔl\Delta — Denotes scaled partial unit cell.

  • Δ≡lΔ∣l=1\Delta\equiv l\Delta\big|_{l=1} — A rescaled partial unit cell.

  • T(lΔ)T(l\Delta) — The set of all lΔl\Delta in T⊂R2T \subset\mathbb{R}^2.

  • ψ\psi — Denotes the parametric map.

  • L\mathcal{L} — A lattice constructed from the basis lattice vectors {ei}i=12\{e_i\}_{i=1}^2.

  • lLl\mathcal{L} — Lattice constructed from lattice vectors {lei}i=12\{l e_i\}_{i=1}^2.

  • I\mathcal{I} — An indexing set for the scaling parameter ll (or hh), with inf⁡I=0\inf\mathcal{I}=0.

  • ∣⋅∣|\cdot| — The notation is context-dependent and represents distinct mathematical concepts accordingly (Cardinality of a set, Lebesgue measure of a set, and absolute value).

In this paper, vectors in R2\mathbb{R}^2 and R3\mathbb{R}^3 will be represented using boldface notation. We frequently consider the decomposition R3=R2×R\mathbb{R}^3 = \mathbb{R}^2 \times\mathbb{R} to distinguish between in-plane and out-of-plane components. The in-plane (tangential) components will be indicated by the subscript pp, while the out-of-plane component will be denoted by the subscript 33. To maintain clarity, we refrain from using boldface for vectors in general spaces.

References

  1. [1]Amir Abdollahi and Irene Arias, Constructive and Destructive Interplay Between Piezoelectricity and Flexoelectricity in Flexural Sensors and Actuators, Journal of Applied Mechanics 82 (2015), no. 12, 121003.DOI
  2. [2]Roberto Alicandro, Andrea Braides, and Marco Cicalese, Continuum limits of discrete thin films with superlinear growth densities, Calculus of Variations and Partial Differential Equations 33 (2008), 267–297.DOI
  3. [4]Stuart S Antman and Michael Renardy, Nonlinear problems of elasticity, SIAM Review 37 (1995), no. 4, 637.
  4. [5]Annika Bach, Andrea Braides, and Marco Cicalese, Discrete-to-continuum limits of multibody systems with bulk and surface long-range interactions, SIAM Journal on Mathematical Analysis 52 (2020), no. 4, 3600–3665.
  5. [7]Ashley Bucsek, William Nunn, Bharat Jalan, and Richard D James, Direct conversion of heat to electricity using first-order phase transformations in ferroelectrics, Physical Review Applied 12 (2019), no. 3, 034043.DOI
  6. [8][CAS21] David Codony, Irene Arias, and Phanish Suryanarayana, Transversal flexoelectric coefficient for nanostructures at finite deformations from first principles, Physical Review Materials 5 (2021), no. 3, L030801.DOI
  7. [11][CGK24] Hsu-Cheng Cheng, Laurent Guin, and Dennis M Kochmann, Growth of ferroelectric domain nuclei: Insight from a sharp-interface model, Journal of the Mechanics and Physics of Solids 192 (2024), 105810.DOI
  8. [12][CH08] Richard Courant and David Hilbert, Methods of mathematical physics, volume 1, vol. 1, John Wiley & Sons, 2008.
  9. [13][Che08] Long-Qing Chen, Phase-field method of phase transitions/domain structures in ferroelectric thin films: a review, Journal of the American Ceramic Society 91 (2008), no. 6, 1835–1844.DOI
  10. [14][FJM02] Gero Friesecke, Richard D James, and Stefan Müller, A theorem on geometric rigidity and the derivation of nonlinear plate theory from three-dimensional elasticity, Communications on Pure and Applied Mathematics: A Journal Issued by the Courant Institute of Mathematical Sciences 55 (2002), no. 11, 1461–1506.
  11. [15][Fol20] Gerald B Folland, Introduction to partial differential equations, Princeton university press, 2020.
  12. [16][GD20] Matthew Grasinger and Kaushik Dayal, Statistical mechanical analysis of the electromechanical coupling in an electrically-responsive polymer chain, Soft Matter 16 (2020), no. 27, 6265–6284.DOI
  13. [17][GD21] ———, Architected elastomer networks for optimal electromechanical response, Journal of the Mechanics and Physics of Solids 146 (2021), 104171.DOI
  14. [19][Ger10] Ed Gerstner, Nobel prize 2010: Andre geim & konstantin novoselov, Nature Physics 6 (2010), no. 11, 836–836.DOI
  15. [21][GMS21] Matthew Grasinger, Kosar Mozaffari, and Pradeep Sharma, Flexoelectricity in soft elastomers and the molecular mechanisms underpinning the design and emergence of giant flexoelectricity, Proceedings of the National Academy of Sciences 118 (2021), no. 21, e2102477118.DOI
  16. [23][IK21] Roman Indergand and Dennis M Kochmann, Effect of temperature on domain wall–pore interactions in lead zirconate titanate: A phase-field study, Applied Physics Letters 119 (2021), no. 22.DOI
  17. [24][IVNK20] Roman Indergand, A Vidyasagar, Neel Nadkarni, and Dennis M Kochmann, A phase-field approach to studying the temperature-dependent ferroelectric response of bulk polycrystalline pzt, Journal of the Mechanics and Physics of Solids 144 (2020), 104098.DOI
  18. [25][JBD23] Prashant K Jha, Timothy Breitman, and Kaushik Dayal, Discrete-to-continuum limits of long-range electrical interactions in nanostructures, Archive for Rational Mechanics and Analysis 247 (2023), no. 2, 29.DOI
  19. [26][JJ21] Richard D James and Bharat Jalan, Conversion of heat to electricity using phase transformations in ferroelectric oxide capacitors, March 16 2021, US Patent 10,950,777.
  20. [27][JM94] Richard D James and Stefan Müller, Internal variables and fine-scale oscillations in micromagnetics, Continuum Mechanics and Thermodynamics 6 (1994), 291–336.DOI
  21. [28][JMKD23] Prashant K Jha, Jason Marshall, Jaroslaw Knap, and Kaushik Dayal, Atomic-to-continuum multiscale modeling of defects in crystals with nonlocal electrostatic interactions, Journal of Applied Mechanics 90 (2023), no. 2, 021003.DOI
  22. [29][JS10] Bharat Jalan and Susanne Stemmer, Large seebeck coefficients and thermoelectric power factor of la-doped srtio3 thin films, Applied Physics Letters 97 (2010), no. 4.DOI
  23. [30][JW98] Richard D James and Manfred Wuttig, Magnetostriction of martensite, Philosophical magazine A 77 (1998), no. 5, 1273–1299.
  24. [32][KS05] Robert V Kohn and Valeriy V Slastikov, Another thin-film limit of micromagnetics, Archive for rational mechanics and analysis 178 (2005), 227–245.
  25. [33][KS16] Sana Krichen and Pradeep Sharma, Flexoelectricity: A perspective on an unusual electromechanical coupling, Journal of Applied Mechanics 83 (2016), no. 3.DOI
  26. [39][LS13] LP Liu and P Sharma, Flexoelectricity and thermal fluctuations of lipid bilayer membranes: Renormalization of flexoelectric, dielectric, and elastic properties, Physical Review E 87 (2013), no. 3, 032715.DOI
  27. [42][MD14] Jason Marshall and Kaushik Dayal, Atomistic-to-continuum multiscale modeling with long-range electrostatic interactions in ionic solids, Journal of the Mechanics and Physics of Solids 62 (2014), 137–162.DOI
  28. [43][MK24a] Anand Mathew and Yashashree Kulkarni, Active matter as the underpinning agency for extraordinary sensitivity of biological membranes to electric fields, arXiv preprint arXiv:2412.16319 (2024).arxiv.org/abs/2412.16319
  29. [44][MK24b] ———, An electro-mechanical theory with flexoelectricity: Application to ionic conductivity of soft solid electrolytes, Journal of Applied Mechanics 91 (2024), no. 4.DOI
  30. [45][NKPV20] Dhriti Nepal, W Joshua Kennedy, Ruth Pachter, and Richard A Vaia, Toward architected nanocomposites: Mxenes and beyond, ACS nano 15 (2020), no. 1, 21–28.DOI
  31. [47][NPV12] Dhriti Nepal, Kyoungweon Park, and Richard A Vaia, High-yield assembly of soluble and stable gold nanorod pairs for high-temperature plasmonics, Small 8 (2012), no. 7, 1013–1020.DOI
  32. [49][PWWC17] Hannah Pohlmann, Jian-Jun Wang, Bo Wang, and Long-Qing Chen, A thermodynamic potential and the temperature-composition phase diagram for single-crystalline k1-xnaxnbo3 (0<= x<= 0.5), Applied Physics Letters 110 (2017), no. 10.DOI
  33. [51][RC23] Aiden M Ross and Long-Qing Chen, Thermodynamics and ferroelectric properties of pbl-xsrx tio3 solid solutions, Acta Materialia 261 (2023), 119405.
  34. [53][Sen22] Shoham Sen, Nonlocal Dipolar Interactions in Complex Geometries for Quantum Embedding, Ph.D. thesis, Carnegie Mellon University, 2022.
  35. [54][Sha94] Kim A Sharp, Electrostatic interactions in macromolecules, Current Opinion in Structural Biology 4 (1994), no. 2, 234–239.
  36. [57][Ste18] David J Steigmann, Mechanics and physics of lipid bilayers, The role of mechanics in the study of lipid bilayers (2018), 1–61.
  37. [58][SWBD] Shoham Sen, Yang Wang, Timothy Breitzman, and Kaushik Dayal, A real-space two-scale analysis of the polarization density in ionic solids.
  38. [59][SWBD24] ———, Nonuniqueness in defining the polarization: Nonlocal surface charges and the electrostatic, energetic, and transport perspectives, Journal of the Mechanics and Physics of Solids 191 (2024), 105743.DOI
  39. [60][Tag86] Alexander K Tagantsev, Piezoelectricity and flexoelectricity in crystalline dielectrics, Physical Review B 34 (1986), no. 8, 5883.
  40. [61][Tag87] Alexander Kirillovich Tagantsev, Pyroelectric, piezoelectric, flexoelectric, and thermal polarization effects in ionic crystals, Soviet Physics Uspekhi 30 (1987), no. 7, 588.
  41. [63][Tou56] Richard A Toupin, The elastic dielectric, Journal of Rational Mechanics and Analysis 5 (1956), no. 6, 849–915.
  42. [65][TWSK02] EB Tadmor, UV Waghmare, GS Smith, and E Kaxiras, Polarization switching in PbTiO3: an ab initio finite element simulation, Acta Materialia 50 (2002), no. 11, 2989–3002.DOI
  43. [68][WC24] Bo Wang and Long-Qing Chen, Theory of strain phase equilibria and diagrams, Acta Materialia 274 (2024), 120025.
  44. [70][WK17] Charles S Wojnar and Dennis M Kochmann, Linking internal dissipation mechanisms to the effective complex viscoelastic moduli of ferroelectrics, Journal of Applied Mechanics 84 (2017), no. 2, 021006.DOI
  45. [71][WLC21] Bo Wang, Fei Li, and Long-Qing Chen, Inverse domain-size dependence of piezoelectricity in ferroelectric crystals, Advanced Materials 33 (2021), no. 51, 2105071.DOI
  46. [75][WYS19] Binglei Wang, Shengyou Yang, and Pradeep Sharma, Flexoelectricity as a universal mechanism for energy harvesting from crumpling of thin sheets, Physical Review B 100 (2019), no. 3, 035438.DOI
  47. [76][Xia05] Yu Xiao, The influence of oxygen vacancies on domain patterns in ferroelectric perovskites, Ph.D. thesis, California Institute of Technology, 2005.DOI
  48. [78][ZGDY19] Jun-Jie Zhang, Jie Guan, Shuai Dong, and Boris I Yakobson, Room-temperature ferroelectricity in group-iv metal chalcogenide nanowires, Journal of the American Chemical Society 141 (2019), no. 38, 15040–15045.DOI
  49. [81][ZWC22] Jacob A Zorn, Bo Wang, and Long-Qing Chen, Q-pop-thermo: A general-purpose thermodynamics solver for ferroelectric materials, Computer Physics Communications 275 (2022), 108302.

Paper details

vlnc:W_tzscq36f
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents