betaFeedback

WorksPhysics and Astronomy

Theory of magnetic field-stabilized compact skyrmions in thin film ferromagnets

Abstract

We present a micromagnetic theory of compact magnetic skyrmions under applied magnetic field that accounts for the full dipolar energy and the interfacial Dzyaloshinskii-Moryia interaction (DMI) in the thin film regime. Asymptotic analysis is used to derive analytical formulas for the parametric dependence of the skyrmion size and rotation angle, as well as the energy barriers for collapse and bursting, two processes that lead to a finite skyrmion lifetime. We demonstrate the existence of a new regime at low DMI, in which the skyrmion is stabilized by a combination of non-local dipolar interaction and a magnetic field applied parallel to its core, and discuss the conditions for an experimental realization of such field-stabilized skyrmions.

Introduction

Introduction. Since the first real-space observation of skyrmions in a chiral magnet [1], there have been a great number of theoretical and experimental studies devoted to skyrmionics [2, 3]. These developments are motivated by the remarkable compactness, stability and tunability of skyrmions, which makes them attractive candidates for future applications in information technology [3, 4]. Starting with the first experiments in chiral magnets [1], it was observed that skyrmions spontaneously appear in a certain range of non-zero magnetic field in various bulk materials and thin-film heterostructures [5]. Indeed, while the ground state of chiral magnets is the helical state at zero magnetic field, the ferromagnetic ground state is restored when a sufficiently strong magnetic field is applied. However, isolated skyrmions and skyrmion lattices may exist as metastable states under applied magnetic fields, as predicted in the late 80’s [6, 7]. The precise dependence of an isolated skyrmion size on the applied magnetic field was investigated numerically [7, 8, 9, 10]. In the isolated skyrmion regime, the size of a skyrmion decreases (increases) with increasing (decreasing) magnetic field applied antiparallel to magnetization in the skyrmion core [7, 9].

While the antiparallel configuration has been widely investigated theoretically and experimentally [5, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21], the parallel configuration was considered in only a handful of studies [9, 10, 22, 23]. The reason is that most studies on skyrmions are carried out in the strong DMI regime, where isolated skyrmions are very easily destabilized by a magnetic field applied parallel to the skyrmion core via the so-called “bursting” phenomenon, whereby the magnetic layer is reversed to the uniform state as the skyrmion radius goes to infinity. The position of the bursting line on the skyrmion stability diagram was estimated by numerical minimization in previous theoretical works [9, 10, 22, 23]. A solution to avoid this instability is to confine the skyrmion in a dot to extend its stability to a wider range of applied fields [24, 25, 26]. Another possibility is to work in the low DMI regime. In this regime, it was recently demonstrated [27] that the non-local dipolar interaction that has been classically neglected [9, 10] [28], may become comparable to the DMI and play a role in skyrmion stabilization. Several works based on approximate models suggest that the non-local dipolar interaction modifies the range of existence of isolated skyrmions in applied magnetic fields [22, 23], but this regime has remained largely unexplored.

In this Letter, we carry out an investigation of isolated compact skyrmions under an applied magnetic field in the thin film and low DMI regime, taking into account the full stray field. We carry out an asymptotic analysis and obtain analytical formulas predicting the skyrmion radius, angle, as well as the collapse and bursting energy barriers as functions of the system parameters. We obtain a skyrmion stability diagram, which reveals a different response to a parallel field at low DMI strength compared to the existing phase diagrams [10, 22, 23]. This modification of the skyrmion phase diagram due to stray field effects is confirmed by direct micromagnetic simulations. We emphasize that in this regime the parallel field enables to increase the skyrmion size and stability and discuss possible routes to observe field-stabilized skyrmions experimentally in conventional skyrmion materials.

Model

Model. We consider a ferromagnetic thin film with perpendicular magnetic anisotropy and interfacial DMI. Following our previous works [27, 29, 30, 31] with the addition of the Zeeman energy term, the micromagnetic energy of a magnetization m:R2→S2\mathbf{m} : \mathbb{R}^{2} \to\mathbb{S}^{2} reduces to (see [32]) for details):

E(m)=∫R2(∣∇m∣2+(Q−1)∣m⊥∣2) d2r−∫R2(2h(m∥+1)+2κm⊥⋅∇m∥) d2r−δ8π∫R2∫R2(m∥(r)−m∥(r′))2∣r−r′∣3 d2r d2r′+δ4π∫R2∫R2∇⋅m⊥(r) ∇⋅m⊥(r′)∣r−r′∣ d2r d2r′,(1)\begin{aligned} E(\mathbf{m})={}&\int_{\mathbb{R}^{2}}\left(|\nabla\mathbf{m}|^{2}+(Q-1)|\mathbf{m}_{\perp}|^{2}\right)\,d^{2}r\\ &-\int_{\mathbb{R}^{2}}\left(2h(m_{\parallel}+1)+2\kappa\mathbf{m}_{\perp}\cdot\nabla m_{\parallel}\right)\,d^{2}r\\ &-\frac{\delta}{8\pi}\int_{\mathbb{R}^{2}}\int_{\mathbb{R}^{2}}\frac{(m_{\parallel}(\mathbf{r})-m_{\parallel}(\mathbf{r}'))^{2}}{|\mathbf{r}-\mathbf{r}'|^{3}}\,d^{2}r\,d^{2}r'\\ &+\frac{\delta}{4\pi}\int_{\mathbb{R}^{2}}\int_{\mathbb{R}^{2}}\frac{\nabla\cdot\mathbf{m}_{\perp}(\mathbf{r})\,\nabla\cdot\mathbf{m}_{\perp}(\mathbf{r}')}{|\mathbf{r}-\mathbf{r}'|}\,d^{2}r\,d^{2}r', \tag*{(1)} \end{aligned}

where m⊥∈R2\mathbf{m}_{\perp}\in\mathbb{R}^{2} is the in-plane component of m\mathbf{m}, i.e., the component perpendicular to the out-of-plane anisotropy easy axis, and m∥∈Rm_{\parallel}\in\mathbb{R} is the out-of-plane component of m\mathbf{m}, i.e., the component parallel to the easy axis. The energy is measured in the units of AdAd, where AA is the exchange stiffness and dd the film thickness. Lengths are measured in the units of the exchange length ℓex=2A/(μ0Ms2)\ell_{\mathrm{ex}}=\sqrt{2A/(\mu_{0}M_{s}^{2})}, where MsM_{s} is the saturation magnetization and μ0\mu_{0} the vacuum magnetic permeability. The dimensionless film thickness is δ=d/ℓex≲1\delta=d/\ell_{\mathrm{ex}}\lesssim1. We assume that the external magnetic field is applied normally to the film plane. We introduced the dimensionless quality factor Q=Ku/Kd>1Q=K_{u}/K_{d}>1, where KuK_{u} is the magnetocrystalline anisotropy constant and Kd=12μ0Ms2K_{d}=\frac{1}{2}\mu_{0}M_{s}^{2}, the dimensionless DMI strength κ=D/AKd\kappa=D/\sqrt{AK_{d}}, and the dimensionless applied magnetic field hh defined as h=(H⋅z^)/Msh=(\mathbf{H}\cdot\hat{\mathbf{z}})/M_{s}. The first four energy terms are local and represent, respectively, the exchange energy, the effective anisotropy energy (magnetocrystalline energy renormalized to take into account the local stray field contribution), the Zeeman energy and the DMI energy. The last two terms correspond to the long-range part of the dipolar energy, which splits into surface and volume contributions (see [32] for details).

We are considering an isolated skyrmion with a magnetization pointing up in its center, in a background where the magnetization is pointing down. As a consequence, we assume that the applied magnetic field in the positive field direction is lower than the anisotropy field, h<Q−1h<Q-1, to ensure that the uniform state m0=−z^\mathbf{m}_{0}=-\hat{\mathbf{z}} is a local minimizer of the energy. Under the condition that m(r)→−z^\mathbf{m}(\mathbf{r})\to-\hat{\mathbf{z}} sufficiently fast as ∣r∣→∞|\mathbf{r}|\to\infty, we consider the skyrmion number

q(m)=14π∫R2m⋅(∂m∂x×∂m∂y) dx dyq(\mathbf{m})=\frac{1}{4\pi}\int_{\mathbb{R}^{2}}\mathbf{m}\cdot\left(\frac{\partial\mathbf{m}}{\partial x}\times\frac{\partial\mathbf{m}}{\partial y}\right)\,dx\,dy

[18, 33], so that with our convention we have q(m)=1q(\mathbf{m})=1 for a skyrmion profile.

Skyrmion profiles

In the regime, in which the other energy terms remain perturbations to the dominating exchange energy, the skyrmion profile can be shown to be close to a Belavin-Polyakov profile [34], i.e., a minimizer of the exchange energy among all m\mathbf{m} with q(m)=1q(\mathbf{m})=1 [35]. Therefore, we can proceed as in [27, 34] with an asymptotic analysis based on a suitably truncated Belavin-Polyakov type profile mρ,θ,L\mathbf{m}_{\rho,\theta,L} (for the precise form, see [32]), with the necessary modifications to account for the presence of the applied field. The equilibrium radius ρ\rho, the rotation angle θ\theta and the cutoff scale LL are obtained

[32, 34] from the minimization of the leading order energy E(mρ,θ,L)≃Eρ,θ,LE(\mathbf{m}_{\rho,\theta,L})\simeq E_{\rho,\theta,L}, where (see Figure 1 for an illustration):

Figure 1. Leading order skyrmion energy Eρ,θ,LE_{\rho,\theta,L} vs. radius ρ\rho after minimization over θ\theta and LL for κ=0.35\kappa=0.35, δ=0.7\delta=0.7, h=0.008h=0.008 and Q=1.591Q=1.591 (see (2.27) in [32]).

Eρ,θ,L=8π+4πL2+4π(Q−1−h)ρ2log⁡(4L2e2(1+γ))−4πhρ2−8πκρcos⁡θ+π3ρδ8(3cos⁡2θ−1),(2)E_{\rho,\theta,L}=8\pi+\frac{4\pi}{L^{2}}+4\pi(Q-1-h)\rho^{2}\log\left(\frac{4L^{2}}{e^{2(1+\gamma)}}\right)-4\pi h\rho^{2}-8\pi\kappa\rho\cos\theta+\frac{\pi^{3}\rho\delta}{8}(3\cos^{2}\theta-1), \tag*{(2)}

where γ≈0.5772\gamma\approx0.5772 is the Euler-Mascheroni constant. Under the assumption εˉ≪1\bar{\varepsilon}\ll1, where

εˉ=11−h×{8π∣κˉ∣−π34δˉ,if ∣κˉ∣≥3π232δˉ,128κˉ23πδˉ+π38δˉ,else,(3)\bar{\varepsilon}=\frac{1}{\sqrt{1-h}}\times \begin{cases} 8\pi|\bar{\kappa}|-\frac{\pi^{3}}{4}\bar{\delta}, & \text{if }|\bar{\kappa}|\ge\frac{3\pi^{2}}{32}\bar{\delta},\\ \frac{128\bar{\kappa}^{2}}{3\pi\bar{\delta}}+\frac{\pi^{3}}{8}\bar{\delta}, & \text{else}, \end{cases} \tag*{(3)}

with

δˉ=δQ−1,κˉ=κQ−1,hˉ=hQ−1,(4)\bar{\delta}=\frac{\delta}{\sqrt{Q-1}},\qquad\bar{\kappa}=\frac{\kappa}{\sqrt{Q-1}},\qquad\bar{h}=\frac{h}{Q-1}, \tag*{(4)}

the minimizer of the reduced energy in (2) gives the leading order skyrmion equilibrium angle

θ0={0,if κˉ≥3π232δˉ,−π,if κˉ≤−3π232δˉ,±arccos⁡(32κˉ3π2δˉ),else,(5)\theta_{0}= \begin{cases} 0, & \text{if }\bar{\kappa}\ge\frac{3\pi^{2}}{32}\bar{\delta},\\ -\pi, & \text{if }\bar{\kappa}\le-\frac{3\pi^{2}}{32}\bar{\delta},\\ \pm\arccos\left(\frac{32\bar{\kappa}}{3\pi^{2}\bar{\delta}}\right), & \text{else}, \end{cases} \tag*{(5)}

and radius ρsk=ρˉsk/Q−1\rho_{\mathrm{sk}}=\bar{\rho}_{\mathrm{sk}}/\sqrt{Q-1}, in units of ℓex\ell_{\mathrm{ex}}, where

ρˉsk=116π1−hˉ×εˉ−W−1(−βεˉ),(6)\bar{\rho}_{\mathrm{sk}}=\frac{1}{16\pi\sqrt{1-\bar{h}}}\times\frac{\bar{\varepsilon}}{-W_{-1}(-\beta\bar{\varepsilon})}, \tag*{(6)}

provided that βεˉ<e−1\beta\bar{\varepsilon}<e^{-1} (see Sec. 2.3 in [32]). Here WiW_{i} refers to the ii-th real-valued branch of the Lambert WW function [36], and β=e1+γ32πexp⁡(hˉ2(1−hˉ))\beta=\frac{e^{1+\gamma}}{32\pi}\exp\left(\frac{\bar{h}}{2(1-\bar{h})}\right). The energy of the optimal skyrmion solution is

Esk=8π−εˉ232πW−12(−βεˉ)(−W−1(−βεˉ)−12).(7)E_{\mathrm{sk}}=8\pi-\frac{\bar{\varepsilon}^{2}}{32\pi W_{-1}^{2}(-\beta\bar{\varepsilon})}\left(-W_{-1}(-\beta\bar{\varepsilon})-\frac{1}{2}\right). \tag*{(7)}

For 0<1−hˉ≪10 < 1-\bar{h} \ll1 with βεˉ<e−1\beta\bar{\varepsilon} < e^{-1} fixed, there is also a minimum energy saddle point solution with equilibrium angle θ0\theta_0 from (5) and radius ρsad=ρˉsad/Q−1\rho_{\mathrm{sad}}=\bar{\rho}_{\mathrm{sad}}/\sqrt{Q-1}, where

ρˉsad=116π1−hˉ×εˉ−W0(−βεˉ).(8)\bar{\rho}_{\mathrm{sad}}=\frac{1}{16\pi\sqrt{1-\bar{h}}}\times\frac{\bar{\varepsilon}}{-W_0(-\beta\bar{\varepsilon})}. \tag*{(8)}

The energy of the saddle is given by

Esad=8π−εˉ232πW02(−βεˉ)(−W0(−βεˉ)−12).(9)E_{\mathrm{sad}}=8\pi-\frac{\bar{\varepsilon}^{2}}{32\pi W_0^{2}(-\beta\bar{\varepsilon})}\left(-W_0(-\beta\bar{\varepsilon})-\frac{1}{2}\right). \tag*{(9)}

The above formulas become asymptically exact when εˉ→0\bar{\varepsilon}\to0 and hˉ→1−\bar{h}\to1^{-} with βεˉ\beta\bar{\varepsilon} fixed, which corresponds to δˉ+∣κˉ∣1−hˉexp⁡(12(1−hˉ))=O(1)\frac{\bar{\delta}+|\bar{\kappa}|}{\sqrt{1-\bar{h}}}\exp\left(\frac{1}{2(1-\bar{h})}\right)=O(1) as δˉ,κˉ→0\bar{\delta},\bar{\kappa}\to0. Asymptotically, the skyrmion and the saddle point solutions disappear via a saddle-node bifurcation at a critical value of ∣κˉ∣=κˉc|\bar{\kappa}|=\bar{\kappa}_{c} given by

κˉc={π232δˉ+41−hˉe2+γe−hˉ2(1−hˉ)if δˉ≤δˉc,3π2δˉ4(1−hˉe2+γe−hˉ2(1−hˉ)−π2δˉ256)else,(10)\bar{\kappa}_{c}= \begin{cases} \frac{\pi^{2}}{32}\bar{\delta}+\frac{4\sqrt{1-\bar{h}}}{e^{2+\gamma}}e^{-\frac{\bar{h}}{2(1-\bar{h})}} & \text{if }\bar{\delta}\le\bar{\delta}_{c},\\ \sqrt{\frac{3\pi^{2}\bar{\delta}}{4}\left(\frac{\sqrt{1-\bar{h}}}{e^{2+\gamma}}e^{-\frac{\bar{h}}{2(1-\bar{h})}}-\frac{\pi^{2}\bar{\delta}}{256}\right)} & \text{else}, \end{cases} \tag*{(10)}

where δˉc=641−hˉπ2e2+γe−hˉ2(1−hˉ)\bar{\delta}_{c}=\frac{64\sqrt{1-\bar{h}}}{\pi^{2}e^{2+\gamma}}e^{-\frac{\bar{h}}{2(1-\bar{h})}}, as the value of ∣κˉ∣|\bar{\kappa}| is increased.

Skyrmion phase diagram. In Figure 2, we present the asymptotic skyrmion phase diagram by plotting the scaled skyrmion radius ρˉsk\bar{\rho}_{\mathrm{sk}} from (6) as a function of the dimensionless DMI strength κˉ\bar{\kappa} and applied field hˉ\bar{h}, where the positive field direction is parallel to the skyrmion core [see the insets in Figure 2(b)]. Skyrmion solutions are predicted to exist when 0<∣κˉ∣+δˉ≲10<|\bar{\kappa}|+\bar{\delta}\lesssim1 and hˉ≤hˉc\bar{h}\le\bar{h}_{c}, where hˉc\bar{h}_{c} is obtained by solving for hh in (10), while no skyrmion solutions are expected for hˉ>hˉc\bar{h}>\bar{h}_{c} (see also [32]).

Scaled skyrmion radius phase diagram

Figure 2. Scaled skyrmion radius ρˉsk\bar{\rho}_{\mathrm{sk}} for the intermediate thickness regime with δˉ=0.7\bar{\delta}=0.7 (a) and ultrathin regime with δˉ=0\bar{\delta}=0 (b) as a function of κˉ\bar{\kappa} and hˉ\bar{h}. The convention for the field direction is shown schematically in the insets, where in the skyrmion image, the red and blue colors represent, respectively, down and up magnetizations and white corresponds to in-plane magnetization. For hˉ<0\bar{h}<0, the field is applied antiparallel to the skyrmion core (red arrow in the inset), while for hˉ>0\bar{h}>0 the field is parallel (blue arrow in the inset).

According to Figure 2, in the antiparallel configuration, hˉ<0\bar{h}<0, the skyrmion radius is strongly increasing with ∣κˉ∣|\bar{\kappa}| and increasing slower with a decrease in ∣hˉ∣|\bar{h}|. In the parallel configuration, hˉ>0\bar{h}>0, in the intermediate thickness (δˉ=0.7\bar{\delta}=0.7) regime shown in Figure 2(a), the skyrmion radius dependence is, to the contrary, dominated by its magnetic field dependence and the dependence on ∣κˉ∣|\bar{\kappa}| is strongly reduced for small ∣κˉ∣|\bar{\kappa}|. In particular, the lines of equal radius present a concave character and become parallel to the yy axis as ∣κˉ∣→0|\bar{\kappa}|\to0. This diminished dependence of ρˉsk\bar{\rho}_{\mathrm{sk}} on ∣κˉ∣|\bar{\kappa}| comes from the fact that the dominant stabilization mechanism in the low ∣κˉ∣|\bar{\kappa}| regime is the long-range dipolar interaction. The skyrmion behavior in this regime presents remarkable differences from what is predicted by the classical skyrmion theory, which only takes into account the local dipolar interaction [9, 10] [28]. For comparison, we set δˉ=0\bar{\delta}=0 in our model in Figure 2(b), which is equivalent to neglecting the long-range dipolar interactions. In this case, the lines of constant radius do not present this strong concave character and the main source of skyrmion stabilization in the whole field range is solely the increase of ∣κˉ∣|\bar{\kappa}|.

Skyrmion stability. A second important outcome of our analysis is the prediction of the parametric dependence of the bursting energy barrier. Previous studies on skyrmion stability have focused on the collapse phenomenon and the field applied antiparallel to the skyrmion core [11, 14, 16, 27, 37, 38, 39]. However, for a field applied parallel to the skyrmion core, bursting is the main source of instability. These two energy barriers are shown in Figure 1, where we present the skyrmion energy as a function of the radius ρ\rho for a given set of parameters (see (2.27) in [32]). The local minimum of energy at ρsk\rho_{\mathrm{sk}} corresponds to the equilibrium skyrmion solution. For ρ<ρsk\rho< \rho_{\rm sk} the energy is increasing with decreasing ρ\rho and reaches the value $8\pi$ at ρ=0\rho= 0, as all the energies tend to zero except the exchange energy, which tends to its minimum value of 8π8\pi among configurations with q=1q = 1, as first demonstrated in [35] and discussed previously [11, 14, 23, 27, 34]$.

The energy difference between the equilibrium skyrmion and the “zero radius skyrmion” is thus ΔEcoll=8π−Esk\Delta E_{\rm coll} = 8\pi- E_{\rm sk}, which serves as the energy barrier to skyrmion collapse [40]. As the radius becomes larger than ρsk\rho_{\rm sk}, the energy is increasing and a saddle point of the micromagnetic energy is observed at ρsad\rho_{\rm sad}. This saddle prevents the skyrmion solution from bursting as the skyrmion energy would otherwise go to −∞-\infty as the skyrmion radius tends to infinity. The bursting barrier is defined as ΔEburst=Esad−Esk\Delta E_{\rm burst} = E_{\rm sad} - E_{\rm sk}. The collapse and bursting energy barriers are plotted as functions of ∣κˉ∣|\bar{\kappa}| and hˉ\bar{h} in Figure 3(a) and (Figure 3b) for the magnetic field applied parallel to the skyrmion core. The collapse and bursting energy

Skyrmion collapse and bursting energy barriers

Figure 3. Skyrmion collapse ΔEcoll\Delta E_{\mathrm{coll}} (a) and bursting ΔEburst\Delta E_{\mathrm{burst}} (b) energy barriers (in units of AdAd) for the intermediate thickness regime with δˉ=0.7\bar{\delta}=0.7. Also shown is the effective barrier ΔE=min⁡(ΔEcoll,ΔEburst)\Delta E=\min(\Delta E_{\mathrm{coll}},\Delta E_{\mathrm{burst}}), which illustrates the optimal stability region against collapse and bursting for δˉ=0.7\bar{\delta}=0.7 (c) and for the ultrathin film with δˉ=0\bar{\delta}=0 (d).

barriers present opposite variations as the effective DMI or applied magnetic field are increased: an increase of ∣κˉ∣|\bar{\kappa}| or hˉ\bar{h} increases the collapse barrier, but decreases the bursting barrier. As a consequence, in the positive field regime, our theory predicts that the optimum stability region for skyrmions is where both the collapse and the bursting barriers are large. This optimum stability region is illustrated in Figure 3(c) and (Figure 3d), where we plot the effective energy barrier ΔE=min⁡(ΔEcoll,ΔEburst)\Delta E = \min(\Delta E_{\rm coll}, \Delta E_{\rm burst}). In Figure 3(c), for an intermediate thickness (δˉ=0.7\bar{\delta} = 0.7), the optimal stability is obtained at large ∣κˉ∣|\bar{\kappa}|, for low applied

fields. As ∣κˉ∣|\bar{\kappa}| is decreased, the region of optimum stability, which appears in reddish colors, is shifted to positive fields, showing that the applied positive field can partly compensate the decrease of DMI to stabilize skyrmions in the low ∣κˉ∣|\bar{\kappa}| regime. The stabilization of the skyrmion in this regime is due to a combined effect of the applied positive field and the long-range dipolar interaction. In Figure 3(d), we present the ultrathin film limit (δˉ=0\bar{\delta} = 0). In that case, the positive field cannot compensate the decrease of ∣κˉ∣|\bar{\kappa}| and hardly any increase of skyrmion stability with applied positive field is observed in the low ∣κˉ∣|\bar{\kappa}| regime. Comparison between these two cases in Figure 3(c) and (Figure 3d) reveals that the long-range dipolar interaction provides a stabilization mechanism in low DMI systems leading to a new regime of parallel field stabilization of skyrmions.

Micromagnetic simulations. To confirm the existence of field-stabilized compact skyrmions in the positive field regime, we carried out micromagnetic simulations, using MuMax3 [41] (see [32] for details on the procedure). The chosen dimensional parameters correspond to a ferrimagnetic materials with a low MsM_s and KuK_u (see Figure 4 caption). In Figure 4, we present the skyrmion radius (a) and rotation angle (b) predicted by our model [see (6) and (5)] for this set of parameters. The corresponding values of the skyrmion radius and angle from the simulations are presented, respectively, in Figs. 4(c) and (d), where the dashed line is the line of zero bursting barrier defined in (10). Figure 4(c) also shows several points in the parameter space for which we present the numerical magnetization profiles in Figure 5. These profiles agree very well with the suitably rotated and dilated Belavin-Polyakov profiles, consistently with our theoretical predictions.

Skyrmion characteristics in the low DMI regime

Figure 4. The skyrmion characteristics in the low DMI regime for d=5d = 5 nm, A=20A = 20 pJ/m, Ms=105M_s = 10^5 A/m, and Ku=6346K_u = 6346 J/m3^3 corresponding to Q=1.01Q = 1.01: (a) Skyrmion radius rskyr_{\rm sky} and (b) skyrmion rotation angle ∣θ0∣|\theta_0| from (6) and (5); (c) skyrmion radius and (d) skyrmion rotation angle from MuMax3 simulations on a 2048×20482048 \times2048 nm2^2 square box with mesh size 2×2×52 \times2 \times5 nm. The dashed line is the line of zero bursting barrier defined in (10).

Magnetization profiles along the x-axis

Figure 5. The magnetization profiles along the xx-axis with the skyrmion at the origin obtained from the MuMax simulations for the parameters indicated by the respective dots in Figure 4(c). The simulation datapoints are shown with the solid black dots, while the Belavin-Polyakov profiles obtained by fitting their radius and angle to the simulation data are shown with the solid blue lines.

The simulations and the theory show a good agreement: they both predict, at fixed DMI, an increase of the skyrmion radius from around 20 nm up to bursting as the positive field increases [Figure 4(a) and (Figure 4c)], and at fixed magnetic field, a reorientation of the skyrmion angle from around 60° to 90° as κˉ\bar{\kappa} is decreased to zero [Figure 4(b) and (Figure 4d)]. This confirms the existence of skyrmions stabilized by a parallel field in the low ∣κˉ∣|\bar{\kappa}| regime.

In the top right part of Figure 4(c) and (Figure 4d) the white zone corresponds to a region where the skyrmion has bursted and the system is homogeneously magnetized in the direction of the positive applied field. The numerical solution persists beyond the dashed line representing the region of existence of our solution. This is expected due to the asymptotic nature of the theory. The numerical solution persists in the form of a less compact profile before bursting occurs. This further extends the predicted range in which skyrmions can be stabilized with the help of a positive field.

Conclusions and perspective. We have derived the magnetic field dependence of the compact skyrmion size and rotation angle, along with its thermal stability, in the presence of DMI and full dipolar interaction. In particular, we obtained a condition for skyrmion bursting at positive magnetic field, which agrees quantitatively with micromagnetic simulations in the regime of compact skyrmions and which may be an invaluable tool for predicting this type of instability. We also established that a balance needs to be found between collapse and bursting energy barriers to optimize the skyrmion stability.

Our analysis reveals that due to the presence of long-range dipolar interaction an increase of the magnetic field applied parallel to the skyrmion core increases the size and stability of a skyrmion similarly to the effect of increasing the DMI strength. A reason why a positive applied field has never been used to stabilize skyrmions so far is that the samples in which skyrmions are observed very often exhibit spontaneous demagnetization in the form of a helicoidal state or a stripe state at zero applied field. This phenomenon occurs in the presence of a large DMI or/and due to long-range demagnetizing effects. In the quest for room temperature nanometer size skyrmions, recent works have focused on ferrimagnetic systems, following some predictions of more stable skyrmions in such system with a low MsM_s and thicknesses of the order of 5 – 10 nm [14, 27]. In these systems, room temperature stable skyrmions are observed experimentally at zero applied magnetic field [42, 43] and they constitute the ideal candidates to observe field-stabilized skyrmions in the new regime predicted by our theory.

Lastly, while our study focuses on the collapse and bursting mechanisms in the low effective DMI and thickness regime, it would be interesting to extend our investigation to systems exhibiting more complex mechanisms of thermal instability, as in the case of systems with strong DMI and strong magnetocrystalline anisotropy studied previously in the case of no applied field (see, e.g., [38, 44, 45, 46]).

The work of C. B. M. was supported, in part, by NSF via grant DMS-1908709. T. M. S. was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy EXC 2044–390685587, Mathematics Münster: Dynamics–Geometry–Structure.

References

  1. [1]S. Mühlbauer, B. Binz, F. Jonietz, C. Pfleiderer, A. Rosch, A. Neubauer, R. Georgii, and P. Böni, Skyrmion lattice in a chiral magnet, Science 323, 915 (2009).DOI
  2. [2]K. Everschor-Sitte, J. Masell, R. M. Reeve, and M. Kläui, Perspective: Magnetic skyrmions—Overview of recent progress in an active research field, J. Appl. Phys. 124, 240901 (2018).
  3. [3]A. Fert, N. Reyren, and V. Cros, Magnetic skyrmions: advances in physics and potential applications, Nat. Rev. Mater. 2, 17031 (2017).DOI
  4. [4]X. Zhang, Y. Zhou, K. M. Song, T.-E. Park, J. Xia, M. Ezawa, X. Liu, W. Zhao, G. Zhao, and S. Woo, Skyrmion-electronics: writing, deleting, reading and processing magnetic skyrmions toward spintronic applications, J. Phys. – Condensed Matter 32, 143001 (2020).DOI
  5. [5]Y. Tokura and N. Kanazawa, Magnetic Skyrmion Materials, Chem. Rev. 121, 2857 (2021).DOI
  6. [6]A. N. Bogdanov and D. A. Yablonskii, Thermodynamically stable “vortices” in magnetically ordered crystals, Sov. Phys. – JETP 68, 101 (1989).
  7. [7]A. N. Bogdanov, M. V. Kudinov, and D. A. Yablonskii, Theory of magnetic vortices in easy-axis ferromagnets, Sov. Phys. – Solid State 31, 1707 (1989).
  8. [8]A. Bogdanov and A. Hubert, Thermodynamically stable magnetic vortex states in magnetic crystals, J. Magn. Magn. Mater. 138, 255 (1994).DOI
  9. [9]A. Bogdanov and A. Hubert, The properties of isolated magnetic vortices, Physica Status Solidi (B) 186, 527 (1994).
  10. [10]A. Bogdanov and A. Hubert, The stability of vortex-like structures in uniaxial ferromagnets, J. Magn. Magn. Mater. 195, 182 (1999).DOI
  11. [11]C. Melcher, Chiral skyrmions in the plane, Proc. R. Soc. Lond. Ser. A 470, 20140394 (2014).DOI
  12. [12]B. Dupé, M. Hoffmann, C. Paillard, and S. Heinze, Tailoring magnetic skyrmions in ultra-thin transition metal films, Nature Commun. 5, 4030 (2014).DOI
  13. [13]A. Siemens, Y. Zhang, J. Hagemeister, E. Y. Vedmedenko, and R. Wiesendanger, Minimal radius of magnetic skyrmions: statics and dynamics, New J. Phys. 18, 045021 (2016).arxiv.org/abs/1601.04898
  14. [14]F. Büttner, I. Lemesh, and G. S. D. Beach, Theory of isolated magnetic skyrmions: From fundamentals to room temperature applications, Sci. Rep. 8, 4464 (2018).DOI
  15. [15]X. S. Wang, H. Y. Yuan, and X. R. Wang, A theory on skyrmion size, Commun. Phys. 1, 31 (2018).DOI
  16. [16]L. Desplat, C. Vogler, J. V. Kim, R. L. Stamps, and D. Suess, Path sampling for lifetimes of metastable magnetic skyrmions and direct comparison with Kramers’ method, Phys. Rev. B 101, 060403(R) (2020).DOI
  17. [17]N. Romming, C. Hanneken, M. Menzel, J. E. Bickel, B. Wolter, K. von Bergmann, A. Kubetzka, and R. Wiesendanger, Writing and deleting single magnetic skyrmions, Science 341, 636 (2013).DOI
  18. [18]N. Nagaosa and Y. Tokura, Topological properties and dynamics of magnetic skyrmions, Nature Nanotechnol. 8, 899 (2013).DOI
  19. [19]N. Romming, A. Kubetzka, C. Hanneken, K. von Bergmann, and R. Wiesendanger, Field-dependent size and shape of single magnetic skyrmions, Phys. Rev. Lett. 114, 177203 (2015).DOI
  20. [20]L. Mougel, P. M. Buhl, R. Nemoto, T. Balashov, M. Hervé, J. Skolaut, T. K. Yamada, B. Dupé, and W. Wulfhekel, Instability of skyrmions in magnetic fields, Appl. Phys. Lett. 116, 262406 (2020).DOI
  21. [21]M. Hervé, B. Dupé, R. Lopes, M. Böttcher, M. D. Martins, T. Balashov, L. Gerhard, J. Sinova, and W. Wulfhekel, Stabilizing spin spirals and isolated skyrmions at low magnetic field exploiting vanishing magnetic anisotropy, Nature Commun. 9, 1015 (2018).DOI
  22. [22]N. S. Kiselev, A. N. Bogdanov, R. Schäfer, and U. K. Rößler, Chiral skyrmions in thin magnetic films: new objects for magnetic storage technologies?, J. Phys. D: Appl. Phys. 44, 392001 (2011).DOI
  23. [23]A. Bernard-Mantel, L. Camosi, A. Wartelle, N. Rougemaille, M. Darques, and L. Ranno, The skyrmion-bubble transition in a ferromagnetic thin film, SciPost. Phys. 4, 027 (2018).
  24. [24]F. Tejo, A. Riveros, J. Escrig, K. Y. Guslienko, and O. Chubykalo-Fesenko, Distinct magnetic field dependence of Néel skyrmion sizes in ultrathin nanodots, Sci. Rep. 8, 6280 (2018).DOI
  25. [25]T. B. Winkler, K. Litzius, A. de Lucia, M. Weißenhofer, H. Fanghor, and M. Kläui, Skyrmion states in disk geometry, Phys. Rev. Applied 16, 044014 (2021).DOI
  26. [26]D. Cortés-Ortuño, N. Romming, M. Beg, K. von Bergmann, A. Kubetzka, O. Hovorka, H. Fanghor, and R. Wiesendanger, Nanoscale magnetic skyrmions and target states in confined geometries, Phys. Rev. B 99, 214408 (2019).
  27. [27]A. Bernard-Mantel, C. B. Muratov, and T. M. Simon, Unraveling the role of dipolar versus Dzyaloshinskii-Moriya interactions in stabilizing compact magnetic skyrmions, Phys. Rev. B 101, 045416 (2020).
  28. [29]C. B. Muratov and V. V. Slastikov, Domain structure of ultrathin ferromagnetic elements in the presence of Dzyaloshinskii-Moriya interaction, Proc. R. Soc. Lond. Ser. A 473, 20160666 (2016).DOI
  29. [30]H. Knüpfer, C. B. Muratov, and F. Nolte, Magnetic domains in thin ferromagnetic films with strong perpendicular anisotropy, Arch. Rat. Mech. Anal. 232, 727 (2019).DOI
  30. [31]C. B. Muratov, A universal thin film model for Ginzburg-Landau energy with dipolar interaction, Calc. Var. Partial Differential Equations 58, 52 (2019).DOI
  31. [32]See Supplemental Material at [URL to be inserted by publisher].
  32. [33]H.-B. Braun, Topological effects in nanomagnetism: from superparamagnetism to chiral quantum solitons, Adv. Phys. 61, 1 (2012).DOI
  33. [34]A. Bernard-Mantel, C. B. Muratov, and T. M. Simon, A quantitative description of skyrmions in ultrathin ferromagnetic films and stability of degree ±1 harmonic maps from R² to S², Arch. Rat. Mech. Anal. 239, 219 (2021).
  34. [35]A. A. Belavin and A. M. Polyakov, Metastable states of two-dimensional isotropic ferromagnets, JETP Lett. 22, 245 (1975).
  35. [36]R. M. Corless, G. H. Gonnet, D. E. G. Hare, D. J. Jeffrey, and D. E. Knuth, On the Lambert W function, Adv. Comput. Math. 5, 329 (1996).
  36. [37]P. F. Bessarab, V. M. Uzdin, and H. Jonsson, Method for finding mechanism and activation energy of magnetic transitions, applied to skyrmion and antiferromagnetic annihilation, Comput. Phys. Commun. 196, 335 (2015).DOI
  37. [38]D. Cortés-Ortuño, W. Wang, M. Beg, R. A. Pepper, M.-A. Bisotti, R. Carey, M. Vousden, T. Kluyver, O. Hovorka, and H. Fangohr, Thermally stability and topological protection of skyrmions in nanotracks, Sci. Rep. 7, 4060 (2017).
  38. [39]M. Hoffmann, G. P. Müller, and S. Blügel, Atomistic perspective of long lifetimes of small skyrmions at room temperature, Phys. Rev. Lett. 124, 247201 (2020).DOI
  39. [40]A. Bernard-Mantel, C. B. Muratov, and V. V. Slastikov, A micromagnetic theory of skyrmion lifetime in ultrathin ferromagnetic films, Proc. Natl. Acad. Sci. USA 119, e2122237119 (2022).
  40. [41]A. Vansteenkiste, J. Leliaert, M. Dvornik, M. Helsen, F. Garcia-Sanchez, and B. Van Waeyenberge, The design and verification of MuMax3, AIP Adv. 4, 107133 (2014).DOI
  41. [42]L. Caretta, L. Mann, F. Büttner, K. Ueda, B. Pfau, C. M. Günther, P. Hessing, A. Churikova, C. Klose, M. Schneider, D. Engel, C. Marcus, D. Bono, K. Bagschik, S. Eisebitt, and G. S. D. Beach, Fast current-driven domain walls and small skyrmions in a compensated ferrimagnet, Nature Nanotechnol. 13, 1154 (2018).DOI
  42. [43]Y. Quessab, J.-W. Xu, E. Cogulu, S. Finizio, J. Raabe, and A. D. Kent, Zero-field nucleation and fast motion of skyrmions induced by nanosecond current pulses in a ferrimagnetic thin film, Nano Lett. 22, 6091 (2022).DOI
  43. [44]L. Desplat, D. Suess, J. V. Kim, and R. L. Stamps, Thermal stability of metastable magnetic skyrmions: Entropic narrowing and significance of internal eigenmodes, Phys. Rev. B 98, 134407 (2018).DOI
  44. [45]B. Heil, A. Rosch, and J. Masell, Universality of annihilation barriers of large magnetic skyrmions in chiral and frustrated magnets, Phys. Rev. B 100, 134424 (2019).DOI
  45. [46]A. S. Varentcova, S. von Malottki, M. N. Potkina, G. Kwiatkowski, S. Heinze, and P. F. Bessarab, Toward room-temperature nanoscale skyrmions in ultrathin films, npj Comput. Mater. 6, 193 (2020).

Paper details

vlnc:W_u78pkhhx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents