WorksPhysics and Astronomy
Combined unitary and symmetric group approach applied to low-dimensional spin systems
Abstract
A novel combined unitary and symmetric group approach is used to study the spin- Heisenberg model and related Fermionic systems in a spin-adapted representation, using a linearly-parameterised Ansatz for the many-body wave function. We show that a more compact ground state wave function representation is obtained when combining the symmetric group, , in the form of permutations of the underlying lattice site ordering, with the cumulative spin-coupling based on the unitary group, . In one-dimensional systems the observed compression of the wave function is reminiscent of block-spin renormalization group approaches, and allows us to study larger lattices (here taken up to 80 sites) with the spin-adapted full configuration interaction quantum Monte Carlo method, which benefits from the sparsity of the Hamiltonian matrix and the corresponding sampled eigenstates that emerge from the reordering. We find that in an optimal lattice ordering the configuration state function with highest weight already captures with high accuracy the spin-spin correlation function of the exact ground state wave function. This feature is found for more general lattice models, such as the Hubbard model, and ab initio quantum chemical models, in this work exemplified by a one-dimensional hydrogen chain. We also provide numerical evidence that the optimal lattice ordering for the unitary group approach is not generally equivalent to the optimal ordering obtained for methods based on matrix-product states, such as the density-matrix renormalization group approach.
Introduction
Symmetry is a concept of paramount importance in physics and chemistry. Continuous symmetries are related to conservation laws by Noether’s theorem[1] and are represented by Lie groups,[2] while discrete symmetries, given by an operator that commutes with the Hamiltonian of a system, are of special importance in electronic structure calculations. Since a set of commuting operators can be simultaneously diagonalized, utilizing the eigenfunctions of the operator causes to have a block-diagonal structure in this basis. Common discrete symmetries used in electronic structure calculations are the discrete translational symmetry on a lattice (by the use of a momentum space basis / Bloch functions[3]), the point-group symmetries of lattices and molecules (by the use of symmetry-adapted molecular orbitals) or conservation of the number of electron and the projection of the total spin (by the use of a Slater-determinant (SD) basis with fixed and ). More elaborate symmetries, such as the global SU(2) spin-rotation symmetry of spin-preserving nonrelativistic Hamiltonians, necessitate a more elaborate consideration, with the unitary group approach (UGA)[4, 5, 6, 7] being a notable example.
The fundamental postulate of quantum mechanics which states that no observable physical quantity must change after exchanging two indistinguishable particles leads to the concept of exchange or permutation symmetry. The finite symmetric group consists of all possible permutations of objects and, following the spin-statistics theorem,[8] fermionic wavefunctions must transform as the antisymmetric irreducible representation of . Additionally, Caley’s theorem states that every group and thus symmetry, can be realized as a sub-group of a symmetric group.[9]
In addition to the exchange of particle labels, we can also consider the effect of exchanging orbital or lattice-site labels. An exchange of a pair of orbitals can be seen as a rotation between the two orbitals, a particularly simple unitary transformation of the underlying basis.[10] Unlike the exchange of particle labels, which in fermionic systems leads to the aforementioned antisymmetric representation of (and trivially realised using Slater determinants), such exchange of orbitals leads to transformations that span much larger irreducible representations of – in general the dimensions of these irreducible representations scale combinatorially with the number of orbitals in the problem. Therefore, different orderings of orbitals (or lattice sites) allow to construct different, yet equivalent Hilbert spaces. It can be expected that, for a particular system, an optimal permutation order can be found in which the exact (e.g. ground-state) wavefunction can be expressed most compactly.
The effect of permutations of orbital/site indices can be seen as a similarity transformation of the Hamiltonian with an orthogonal permutation matrix, , connecting the ordering schemes[11]
There is no change of the spectrum of , but the explicit form of in a spin-adapted basis does change, in contrast to a SD formulation. The influence of orbital/site ordering into the structure of the wave function was already observed in the application of the spin-adapted full configuration interaction quantum Monte Carlo (GUGA-FCIQMC) method [12, 13] to lattice systems. [14] However, the interplay between orbital type, ordering and the unitary group, and their effects on the compactness of many-body wave functions was discovered in our laboratory while solving ab initio Hamiltonians for ground and excited states of poly-nuclear transition metal clusters, exemplified by iron-sulfur clusters (dimers and cubanes) [15] [16, 17], and manganese-oxigen trinuclear molecular systems. [18] We found physically and chemically motivated molecular orbital unitary transformations, based on localization and reordering, that yield an increased compactness of the ground- and excited-state wave functions (to the limit of single-reference wave functions). Moreover, this approach leads to a unique (quasi)-block-diagonal structure of the ab initio Hamiltonian, that in practice allows state-specific optimizations of electronic excited states. This approach is extremely beneficial for spin-adapted methods that take advantage of the sparseness of the wave function, including GUGA-FCIQMC, as the associated computational costs are dramatically reduced.
In the present work we study, in spin- Heisenberg systems, the combined effect of the symmetric group in the form of the permutations of orbital labels and the unitary group providing a spin-adapted basis. Such systems exhibit large quantum fluctuations compared to aforementioned large- problems, and therefore the benefit of such transformations is not immediately obvious. Nevertheless we find that optimal orderings do exist that both compactify the exact ground-state wavefunction and in addition lead to single reference mean-field solutions whose physical properties, such as spin-spin correlation functions, are very close to the fully-correlated exact solutions. We will show a clear difference between the optimal orderings found for density matrix renormalization group (DMRG) and the one for compressing the many-body wave function within the UGA. We find that, unlike in DMRG, it is not locality and entanglement that determine the optimal ordering for the cumulatively spin-coupled UGA wave function, but a mechanism reminiscent of renormalization. As shown in our earlier investigations and in the present work, this finding is very general, and will be shown here for to Hubbard model and a chemical ab initio model, exemplified by a chain of hydrogen atoms.
The Heisenberg Model
The Heisenberg model[19–23] describes the interaction of localized quantum-mechanical spins on a lattice and is a long-studied model, used to describe various aspects of magnetism in the solid state[24–35]. It is given by the Hamiltonian
where the indices and run over all lattice sites, are the symmetric exchange constants and are the quantum mechanical spin operators with the corresponding quantum number . In this work we focus on the Heisenberg model with isotropic antiferromagnetic, , nearest neighbor (NN) interactions only, indicated by the summation subscript in the rest of this work.
The one-dimensional (1D) Heisenberg model with NN interaction is exactly solvable via the Bethe Ansatz[36–38], while an exact solution for higher dimensions and/or long-range interactions is still an elusive problem.[39] In 1D systems matrix product state (MPS) based methods[40–43], like the DMRG approach[44–46] are very successful, even with periodic boundary conditions[47, 48] and long range interactions, due to the area law entanglement[49–51], while for higher dimensions tensor network state approaches can be applied[52–56]. The model does not poses a sign problem[57–59] for unfrustrated bipartite lattices[33, 60] and thus quantum Monte Carlo[61–85] and more recent neural network-based approaches[86–96] are highly effective in providing very accurate numerical solutions in higher dimensions.
Due to impractical implementations, the total SU(2) spin symmetry of the Heisenberg model is usually not used in numerical approaches[39, 97], except the work from Flocke and Karwowski[11] [98, 99, 100, 101, 102] using the symmetric group approach (SGA)[103–107], spin-symmetry adapted MPS/DMRG studies[108–116] and occasional ED[97, 117, 118] and real-space renormalization group studies[119]. Nevertheless the theoretical advantages of using a description conserving both total spin projection, , the total spin, , are striking: (a) further reduction of the Hilbert space size (by additional block diagonalization of ), (b) optimization of electronic states of desired spin, and (c) separation of nearly degenerate states of different total spin.
There are multiple ways to create a spin-adapted basis or the so-called configuration state functions (CSFs), see Refs. [106, 107] and references therein. One of them is the above mentioned SGA, which relies on the invariance of the Hamiltonian with respect to permutations of electrons, or spins in the case of the Heisenberg model[101], and it’s connection to the symmetric group , being the group of all permutations of elements. A different way to construct a spin-adapted basis is the UGA, pioneered by Paldus[4, 5, 6, 7] and Shavitt[120–124], which relies on the spin-free formulation of the electronic structure problem[125, 126]. Based on Shavitt’s graphical extension to UGA (GUGA), [120–124] we recently implemented a spin-adapted version of the FCIQMC method[12, 13, 14] [17, 127, 128], which we will utilize in this work in the study of large systems beyond the capabilities of exact diagonalisation.
To some extent the influence of the ordering of orbitals in the GUGA was already noticed at its inception by Shavitt[122] and Brooks and Schaefer[129, 130]. However, this was mostly to circumvent technical limitations of the time and did not concern any possible effect on the compactness of the ground state wavefunction.
The spin-free Heisenberg model
The Heisenberg Hamiltonian, see Eq. (2), can be expressed entirely in terms of the spin-free excitation operators , also called shift, replacement or singlet operators[105, 131–133], as follows
where is the number of bonds in the lattice and . The operator moves an electron or spin from lattice site to and fulfills the same commutation relations, , as the generators of the unitary group[132]. Flocke and Karwowski[11], employed the related SGA to study the Heisenberg model in a spin-adapted way. The analogy between the SGA and UGA formulation of the Heisenberg Hamiltonian is reviewed in Appendix B. Eq. (3) allows us to study the Heisenberg model in a spin-adapted formalism via the UGA, as utilized in the GUGA-FCIQMC method.
Spin eigenfunctions and the action of permutation operators
Given a system of lattice sites, each associated with a spin- variable, , the Hilbert space of primitive spin functions can be subdivided into states with a fixed spin polarization . From this set spin eigenfunctions[106] with spin and can be constructed. The set forms a -dimensional irreducible representation of the permutational group.[134] In this section we outline, through some simple examples, the consequences of this fact, which we will later exploit more generally.
Spin eigenfunctions can be constructed geneologically[106, 135] using the addition theorem of angular momentum. Thus an -electron CSF with spin can be constructed from an electron CSF with spin , by positively or negatively spin-coupling with a spin . A positive spin coupling is denoted with a symbol (up-spin) and a negative with (down-spin). In the GUGA method, this construction is carried out cumulatively, starting with a single spin, and adding one spin at a time, until the -electron CSF is constructed. An -electron CSF is therefore denoted as a string of ’s and ’s, such as . At each intermediate step, say step , a pure-spin CSF is obtained, with cumulative spin . This means that first element of the CSF string must be a , and at each step of this cumulative construction, the number of ’s cannot exceed that of ’s. Also, the final cumulative spin . For example, for an system with , there are CSFs ( and ) which can be constructed, from a 2-electron triplet and singlet, respectively:
Note that, in the above, we have not explicitly labelled the spins: we might assume them to be in natural order . However, this is not necessary, and we are at liberty to construct the CSFs by coupling the spins in any order we like. To be specific, let us insert the labels of the sites, for example in natural order:
Consider the action of the permutation operator :
In this way, we generate an equivalent set of spin eigenfunctions. However, if we consider the Heisenberg Hamiltonian with for the 3-site chain with open boundary conditions:
In the natural order (1-2-3), the sector of this Hamiltonian is represented as
while in the second order (1-3-2), it is already diagonal:
Therefore, through a process of mere site re-ordering in the CSFs, we have diagonalized the Hamiltonian, meaning that a single CSF is able to fully capture the exact eigenstates of the Hamiltonian in this spin sector of the Hamiltonian. As the two representations of in Eq. (11) and Eq. (12) are related by a similarity transformation generated by the orthogonal permutation matrix connecting the ordering schemes[11], see Eq. (1), the eigenvalues do not change, while the eigenvectors undergo a very advantageous compression.
Moving to the 4-site Heisenberg chain with periodic boundary conditions, we find a similar behavior. Here the Hamiltonian is given by:
The CSF Hilbert space is still only 2 dimensional (), with the two states and . Employing the natural order 1-2-3-4, we obtain the Hamiltonian
whilst the order 1-3-2-4 yields the diagonal Hamiltonian
implying once again single-CSF exact eigenstates. This procedure is very general and of broad applicability, as we have shown in Refs. [15] [16] for the general nonrelativistic ab initio molecular Hamiltonian in the case of a nitrogen dimer and an iron-sulfur cubane chemical model system.
It is worth noting that the 4-site chain with open boundary conditions is not brought into diagonal form by any ordering. No low-spin ground state of a Heisenberg chain/ring of size with NN interaction only is exactly “single reference”. Nevertheless, as we shall show below, the underlying site ordering largely influences the weight and nature of the most dominant CSF (called the “reference CSF”). It is precisely this interplay between permutations of site indices, represented by the symmetric group , and the spin-adapted basis given by the unitary group approach, U(), which we wish to study in this paper.
We also note that Flocke and Karwowski[11] briefly mention the effect of the numbering of the lattice sites on the SGA in their 1997 paper. They found that the ordering affects the number of necessary matrix multiplications to construct a transposition . They illustrated the effect on a square lattice (ladder), and although we focus on 1D systems in this work, we checked to find that they find a different ordering compared to our case, since they were motivated to minimize the number of matrix multiplications to construct the transposition , see the Supplemental Material [136], whereas our motivation is to find representations in which the exact wavefunctions assume maximally compact forms.
Extension to larger systems
Due to the factorial growth of the number of possible reorderings with the system size, it is important to have a physically-motivated approach for the relabeling for larger lattices. An obvious choice for a 6-site chain with open boundary conditions (OBC), or ring with periodic boundary conditions (PBC), would be a “bipar-
| Order | Ref. CSF | PBC | OBC |
| Natural 1-2-3-4-5-6 | 77.9 | 92.2 | |
| Bipartite 1-3-5-2-4-6 | 95.7 | 89.9 | |
| Compact 1-3-2-5-4-6 | 97.1 | 94.7 | |
| SDs Néel state | 47.9 | 44.9 |
Table 1. 6-site orderings and leading CSF weights.

Figure 1. Weight of leading CSF for the compact ordered 6 site chain with OBC. The labels on the lattice sites refer to the order in which the spins are coupled in the GUGA CSF formalism. Thus, for example, the second site from left with label “3” is coupled in the 3rd position in the CSF.
tite” ordering, with one possible bipartite ordering given by e.g. (1-3-5-2-4-6). Indeed, such a reordering, increases the weight of the most dominant CSF, given by to 95.7% compared to the natural order reference state with a weight of 77.9% for PBC. However, for OBC, this bipartite ordering actually decreases the weight of the leading CSF to 89.9% compared with 92.2% for the natural ordering (see Table I (PDF p. 18)).
| SDs | Natural | Bipartite = Compact |
| 0.5 | -0.5774 | |
| 0.0 | 0.2887 | |
| -0.5 | 0.2887 | |
| -0.5 | 0.2887 | |
| 0.0 | 0.2887 | |
| 0.5 | -0.5774 |
Table I (PDF p. 18). 4 Site CSFs to SDs
Very interestingly, we find that there exists an even “more optimal” ordering, which we term compact ordering, shown in Fig. 1, to be explained in the following: Let us take a closer look at the (1-3-2) and (1-3-2-4) orderings of the 3- and 4-site lattice. The (1-3-2) ordering in the 3-site OBC case leads to a single-CSF doublet ground state, and this fact is responsible for the massively increased weight of the leading CSF also in larger 1D Heisenberg systems. As we are dealing with a Heisenberg model, each physical site is locally a doublet. Similar to renormalization group approaches[137–140], one can interpret that the first three sites under the ordering (1-3-2) are coupled to a doublet state with the CSF , termed “three-site meta-spins ” by Malrieu[138], and reminiscent of the block spin idea by Kadanoff[141] (see Figure 2). To confirm this, we measured the local spin expectation value of the first three sites (described in the Appendix of Ref. [17]) and obtained a value very close the expected value of a doublet , .
Thus, if we interpret sites (1-3-2) now as a renormalized site , we can again couple three “sites”, to a new doublet with index , again with , where indicates the renormalized doublet. Finally, for the 6-site system the renormalized doublet couples to singlet with the remaining 6th site, yielding the total reference CSF as . This process is schematically displayed in Fig. 2 and the corresponding site ordering and genealogical spin-coupling of the leading CSF in the compact ordering are shown in Fig. 1. The weight of this CSF in the compact ordering is 97.1% for PBC and 94.7% for OBC in the 6-site lattice, a much larger weight as compared to both the natural and bipartite orderings (see Table I (PDF p. 18)).

Figure 2. Cumulative doublet coupling of “meta-spin-” in the most compact order.
One important difference emerges from the comparison of the natural ordering and the compact renormalized ordering. In the normal ordering the leading CSF () is such that at every second site the cumulative spin vanishes (). The long-range spin correlation is therefore transferred to the other CSFs of the ground state wave function. In the compact renormalized ordering at no time in the leading CSF (except for the last site for a total state with an even number of sites). We describe this feature as a propagating doublet along the chain. Thus, already the leading CSF carries information on the long range correlation. This aspect will be discussed further in the following.
An expression for a total -electron singlet CSF , arising from the coupling of the propagating doublet with the last spin, reads in second quantized form
where is a creation operator at (ordered) position with spin and is the propagating doublet defined by a recurrent formula
with and base . The numerical coefficients and are defined by the Clebsch-Gordan coefficients arising from the angular momenta addition as
and
One could also think about separate coupling of sites (1-3-2) and (6-5-4) to two doublet states, and a consequent coupling of the two doublet states to an overall singlet, as described in [138]. Interestingly, for the 6-site ring, both these approaches are identical and lead exactly to the same Hamiltonian representation. However, as our ultimate goal is to study these systems with GUGA-FCIQMC method, we focus on the cumulative approach here.
With Eq. (16) and (17), the described ordering is easy to generalize to larger lattice sites. Moreover, it is not restricted to a bipartite lattice with an even number of sites, but is also applicable to inherently frustrated systems with an odd number of sites, as shown for the weights of the leading CSFs for a 7-site lattice with PBCs in Table II (PDF p. 19).
| SDs | Natural | Bipartite | Compact |
| 0.0 | -0.5 | 0.0 | |
| 0.0 | 0.1667 | 0.4714 | |
| 0.0 | 0.1667 | -0.2357 | |
| 0.0 | 0.1667 | -0.2357 | |
| 0.0 | 0.1667 | -0.2357 | |
| 0.3536 | 0.1667 | 0.1179 | |
| -0.3536 | 0.1667 | 0.1179 | |
| -0.3536 | -0.1667 | -0.1179 | |
| 0.3536 | -0.1667 | -0.1179 | |
| 0.0 | -0.1667 | 0.2357 | |
| 0.0 | 0.1667 | -0.2357 | |
| -0.3536 | 0.1667 | 0.1179 | |
| 0.3536 | 0.1667 | 0.1179 | |
| 0.3536 | -0.1667 | -0.1179 | |
| -0.3536 | -0.1667 | -0.1179 | |
| 0.0 | -0.1667 | 0.2357 | |
| 0.0 | -0.1667 | 0.2357 | |
| 0.0 | -0.1667 | 0.2357 | |
| 0.0 | -0.1667 | -0.4714 | |
| 0.0 | 0.5 | 0.0 |
Table II (PDF p. 19). 6 Site CSFs to SDs. Coefficients.
| Order | Ref. CSF | PBC | OBC | |
| Natural | 1-2-3-4-5-6-7 | 79.5 | 67.0 | |
| Compact | 1-3-2-5-4-7-6 | 88.7 | 94.3 | |
| SDs “Néel state” | 40.5 | 54.4 |
Table 2. 7-site orderings and leading CSF weights.
Exhaustive search study
We confirmed our renormalization-group motivated[138, 139] Ansatz, described above, by considering all possible permutations of site labels. For all these permutations we exactly diagonalized the corresponding Heisenberg Hamiltonian and investigated what the highest weighted CSF in the ground state is. Due to the rather small Hilbert space size, we were able to exhaustively search the full -factorial permutational space up to 10 site systems and confirm that this compact ordering holds for these system sizes. The optimal ordering for a 10 site system is (1-3-2-5-4-7-6-9-8-10) and the dominant CSF is with a 90.3% weight, which again reflects the coupling of three consecutive sites to a doublet in an iterative way, as depicted in Fig. 2.
For systems larger than 10 sites the combinatorial growth of permutations ( already) prevents an exhaustive search. At the same time obtaining the highest weighted CSF requires a diagonalization of the Hamiltonian, which also is not a feasible route to scale to bigger problems. For this reason we investigated possible cheaper indicators of an optimal ordering and the corresponding leading CSF for system sizes up to 10 sites. For the spin- Heisenberg model with nearest neighbor interaction the diagonal matrix elements are an indicator for the optimal ordering. Fig. 3 shows the diagonal matrix elements of the highest-weighted CSF as a function of the possible non-cyclic permutations (only the first 100 are shown for clarity) of a 6-site ring. The first 4 data points correspond to 4 equivalent compact orderings, followed by 12 equivalent bipartite orderings of the site labels. The figure also shows the single CSF energies of the natural ordering and the diagonal element of a Néel state in a SD basis. One can see there is a stark decrease of the diagonal matrix elements in the compact ordering, which is already quite close to the ground state energy of this system. Thus, a cheaper option to find the most compact representation, other than diagonalization of the full Hamiltonian, is to minimize the diagonal matrix element over the space of possible permutations

Figure 3. (a) Lowest single CSF energies and (b) corresponding weight for the 6-site ring as a function of permutations.
In the GUGA-Heisenberg model the single CSF energies are given by the diagonal exchange contributions[12, 14] [121]:
where is a CSF dependent quantity and is non-zero for NN sites and depending on the chosen ordering. For NN interaction only, the task to minimize Eq. (21) for a given CSF is equivalent to the traveling salesman problem (TSP)[142] (after scaling the possibly negative to positive quantities). This can best be seen when formulating the TSP as a integer linear program[143, 144] in the Miller-Tucker-Zemlin[145] or Dantzig-Fulkerson-Johnson formulation[146]. For more general Heisenberg (higher dimension, longer and anisotropic interactions), or even ab initio models, the minimization of the corresponding Eq. (21) can be mapped to more general quadratic assignment problem[147].
Both quantities and can be expressed in matrix form, where the task is to construct an ordering of the 1D system, which changes to give the lowest possible diagonal matrix element, according to Eq. (21). Figure 4 shows for (a) with the original/natural ordering (1-2-3-4-5-6), (b) with the bipartite ordering (1-4-2-5-3-6) and (c) with the compact ordering (1-3-2-5-4-6). The optimal and thus orderings, which minimize the diagonal matrix element, Eq. (21), are indicated by the red squares, which act as a “mask” and determine which elements contribute to the sum in Eq. (21) (indicated by a red background color in Figure 4). The direct relation between the lowest diagonal matrix element corresponding to the highest weight in the ground state wavefunction can be used to implement efficient approximate solvers to find the optimal permutation and confirm our assumed renormalization structure. We implemented a simulated annealing[148–152] minimizer with 2-opt[153, 154] and 3-opt modifications[155] based on the Lin-Kernigham heuristic[156] to find the optimal ordering for a given CSF. Additionally, the mapping to the TSP allowed us to find the optimal ordering with a state-of-the-art solver by Helsgaun[157, 158] (see the Supplementary Material for sample input files[136]).

Figure 4. Exchange matrix elements, , for the 6 site chain reference CSFs: (a) (natural), (b) (bipartite) and (c) (compact), with the respective order in parenthesis. The non-zero values, due to the corresponding orderings are indicated by the black rectangles. They act as a “mask” in the product , see Eq. (21), and for a given CSF, the “optimal” lattice ordering yields the lowest possible diagonal matrix element, Eq. (21).
To deal with the exponentially growing Hilbert space with increasing system size we combined our excitation generation routines of FCIQMC to stochastically suggest new states, for a given CSF, . With this approach we were able to confirm our renormalized ordering Ansatz for system sizes up to (where we were still able to enumerate the whole Hilbert space), which gives us great confidence that this is not a result restricted to small system sizes. More details on our simulated annealing approach can be found in Appendix § 7.
Spin-spin correlation functions
In addition to the renormalization behavior, another physical motivation can be drawn for the dominant CSF in the optimal ordering: it shows a spin-spin correlation function similar to the exact ground state wave function. This is possible, since a CSF, , consists of a linear combination of SDs[122, 159–161], , (see Supplemental Material [136] for examples)
and thus can yield non-trivial spin-spin correlation functions, even for a single CSF. Figure 5 shows three spin-spin correlation functions , with and for a 10 site Heisenberg chain with OBC, for the different lattice orderings considered in this work compared with the exact result. Both the natural and bipartite single CSF spin-correlation function show a rather trivial behavior. The former characterized by a quickly vanishing spin-spin correlation function already after the first NN, and the latter exhibiting a alternating uniform correlation function. In the case of the natural order leading CSF, , this behavior stems from the above mentioned vanishing intermediate spin, , at every other lattice site. On the contrary, already the leading CSF in the compact ordering carries information of the long-range spin-correlation and exhibits a spin-correlation function that resembles the exact .

Figure 5. (a) , (b) and (c) exact and single-CSF spin-spin correlation functions for the 10 site chain with OBC.
We extended this study to larger lattices, as shown in Figure 6a, where we find that for odd- and even lattice spacings the spin-correlation function of the compact reference CSF is exactly described by an exponential fit for even/odd (green and red dashed lines in Figure 6a). The values of the fit are given by and for even (excluding the first data point) and and for odd lattice spacings. The exact and compact-reference-CSF spin-spin correlation functions for a 30-site lattice with OBC are shown in Figure 6b, which shows that the single CSF results mimic the exact result even for large lattice sizes. However, the short-range behavior of the exact spin-spin correlation function follows a power law decay[39], with and for even and and for odd lattice spacings in the 30-site case, see Figure 6c.

Figure 6. (a) Single CSF spin-spin correlation function for the compact ordering vs. chain size and an exponential fit to the even (green dashed line) and odd spin-spin correlation (red dashed line) for the 36-site single CSF in the compact order, with , , and . (b) OBC Single CSF spin-spin correlation function for the compact ordering compared with exact results obtained with the software package[162] for 30 sites. (c) Power fit to the even and odd spin-spin correlation for the 30-site exact spin-spin correlation function displayed on a double logarithmic scale, with , , and .
Using the method of generating functions, Sato et al. [163] found the exact thermodynamic limit results for up to , which are shown in Table III along
| Compact CSF | Exact OBC | Exact TDL[163] | |
| 1 | -0.166667 | -0.2174740 | -0.1477157 |
| 2 | 0.083333 | 0.0664877 | 0.0606798 |
| 3 | -0.111111 | -0.0722632 | -0.0502486 |
| 4 | 0.055556 | 0.0370753 | 0.0346528 |
| 5 | -0.074074 | -0.0417185 | -0.0308904 |
| 6 | 0.037037 | 0.0251398 | 0.0244467 |
| 7 | -0.049383 | -0.0286345 | -0.0224982 |
Table 3. Exact thermodynamic limit spin-spin correlation functions, [163], 30-site exact diagonalization (ED) and single CSF results.
the single CSF and exact diagonalization (ED) results of 30 sites with OBC. Based on the entanglement perturbation theory (EPT) approach, Wang and Chung[164], derived a relation of $A(r) = -0.1473r^{-0.9604}$ with an error of 0.1% for the odd separations, which also fits the even sites with an opposite sign. Based on a bosonization approach, {citet}Hikihara and Furusaki[165] find a critical exponent . We fitted a power law behavior to the available TDL data[163], see Figure 7, and gathered the resulting parameters and in Table IV, along with the data obtained based on the compact single CSF and 30-site ED results with OBC. Even though the spin-spin correlation function based on the leading CSF of the compact ordering is exponentially decaying, as shown in Figure 6a, the short-range behavior, – especially for even lattice spacings – is quite close to the exact TDL data, as shown in Figure 7.

Figure 7. Analytic TDL spin-spin correlation function[163] with power law fits (solid lines) for even and odd lattice sites, with , , and , compact single CSF spin-spin correlation function with exponential fit (dashed lines) and exact results (ED) with OBC[162].
For this reason we also fitted the spin-spin correlation function obtained from the compact-order leading CSF with a power law, , and gathered the results in Table 4. The number of sites in Table 4 indicate how many data points of were taken into account for the fitting. Using only the first 18 lattices yields a critical exponent very close to the EPT result by Wang and Chung. Increasing the considered number of sites to 96, the critical exponent for even lattice separations overestimates the corresponding reference results, but comes closer. The fact that the spin-spin correlation function obtained by a single CSF is so close to exact many-body results is striking.
| Method | Compact CSF | ED OBC | EPT[164] | TDL[163] | |
| # sites | 18 | 96 | 30 | 7 | |
| 0.174 | 0.201 | 0.133 | – | 0.107 | |
| -0.979 | -1.147 | -0.969 | -0.9604 | -0.820 | |
| Err[%] | 0.3 | 0.3 | 0.1 | 0.1 | 0.0 |
| -0.178 | -0.183 | -0.218 | -0.1473 | -0.148 | |
| -0.726 | -0.880 | -1.049 | -0.9604 | -0.975 | |
| Err[%] | 0.8 | 0.7 | 0.1 | 0.1 | 0.0 |
Table 4. Fit of to for odd and even lattice sites.
GUGA-FCIQMC Calculations
In this section we study the scaling of the (increased) weight of the leading CSF for larger lattice sizes and
the effect it has on GUGA-FCIQMC calculations, as the method usually benefits from a “more single reference and sparse” character of the sampled wavefunction. Details on the GUGA-FCIQMC method can be found in Appendix D and Refs. [12, 13] and computational details and sample input files can be found in the Supplemental Material[136].
As we have identified the single CSF energy as a good indicator for a more optimal ordering, we show it for the different orderings in fig:8a compared to the exact energy of the Heisenberg model, obtained with the software package[162], with OBC as a function of the number of sites. It can be seen that the single CSF energy in the compact ordering is closest and in fact almost parallel to the exact energy.
In Figure 8b we show the weights of the leading CSF, , obtained from GUGA-FCIQMC calculations for the different orderings as a function of the inverse lattice size, , with OBC. The effect that the weight of the leading CSF in the compact ordering is substantially larger compared to the other orderings becomes even more pronounced for larger lattices. This increased weight has a very beneficial influence on the convergence of GUGA-FCIQMC calculation for finite lattices. To demonstrate this, Figure 9 shows the energy difference to numerically exact DMRG results, obtained with BLOCK[108, 167–169], for the (a) 20- and (b) 30-site Heisenberg model with OBC for the compact and natural ordering and a SD-based calculations as a function of the number of walkers, .

Figure 8. (a) Open BC single CSF energies per site of different orderings vs. the number of sites compared with exact Bethe Ansatz[166] and ED results, obtained with HΦ[162]. (b) Open BC weights of the leading CSFs of different orderings vs. the inverse lattice size.

Figure 9. Difference of GUGA-FCIQMC energy per site results compared to ED results[162] of the 20- (a) and 30-site (b) 1D Heisenberg model with open boundary conditions for different orderings (natural and compact) and a SD-based results (SDs) versus the number of walkers .
Using the spin-adapted GUGA-FCIQMC calculation with the natural ordering is an order of magnitude more accurate for a given number of walkers compared to the standard SD-based implementation. In addition, using the compact ordering yields an additional order of magnitude in accuracy. As we show below, the increased weight of the leading CSF induced by site reordering in the GUGA-scheme is not restricted to the Heisenberg model.
Extension to Hubbard and ab initio models.
Here we extend our study from a pure spin-model to Fermionic problems in form of the Hubbard model and to ab initio Hamiltonians in form of chains of equally spaced hydrogen atoms. This entails a much larger
Hilbert space size, as the orbitals/sites can also be empty or doubly occupied. To stay as close as possible to our Heisenberg study above, we choose the parameters of the models in such a way (localized bases, large and hydrogen atom separation) so that the ground states are dominated by states with entirely singly-occupied/open-shell orbitals.
Figure 10a-Figure 10c shows the difference of GUGA-FCIQMC energy per site results compared to numerically exact DMRG results[108, 167–169] for the 10-, 20- and 30-site Hubbard model with and OBC. Similar to the Heisenberg results, using a spin-adapted formulation and the compact ordering yields an order of magnitude more accurate results compared to a SD based calculation. Albeit not as drastic as for the Heisenberg model, also the weight of the leading CSF, , is substantially increased for the Hubbard model calculations, as shown in Table V.
| Order | Heisenberg | Heisenberg | Hubbard | Hubbard | Hubbard | Hydrogen | Hydrogen | Hydrogen |
| # sites | 20 | 30 | 10 | 20 | 30 | 10 | 20 | 30 |
| Compact | 85.4 | 79.0 | 87.3 | 77.1 | 68.4 | 74.0 | 54.9 | 46.8 |
| Natural | 60.2 | 43.0 | 78.9 | 54.7 | 43.3 | 67.2 | 41.3 | 36.1 |
Table V. Weight of the leading CSF [%] for the Heisenberg, Hubbard and Hydrogen chains with OBC for the natural and compact ordering.

Figure 10. Difference of GUGA-FCIQMC energy per site results compared to DMRG reference results[108, 167–169] of the 10- (a), 20- (b) and 30-site (c) 1D Hubbard model with open boundary conditions for different orderings (natural and compact) and SD-based results (SDs) versus the number of walkers .
As an example of an ab initio model system, we study 1D hydrogen chains, recently studied to benchmark various computational physics and chemistry approaches[170, 171]. Figure 11a-Figure 11c shows the difference of GUGA-FCIQMC energy per site results compared to numerically exact DMRG calculations[108, 167–169] for a 10-, 20- and 30-site hydrogen chain in a STO-3g basis set for the different orderings and SD-based calculations as a function of the number of walkers. The inter-hydrogen separation was 3.6 Å and we used localized orbitals. The results are very similar to the Heisenberg and Hubbard model discussed above, where again, performing spin-adapted calculations with a compact ordering yields results an order of magnitude more accurate for a given number of walkers compared to the standard SD-based FCIQMC method. In addition the compact ordering inincreases the weight of the leading CSF compared to the natural ordering, as shown in Table V. The 30-site hydrogen results indeed show a difference between the natural and compact ordering scheme. While the natural order results with SU(2) symmetry (blue circles) are already converged for , the compact ordering scheme, which introduces some long range interactions, requires a matrix dimension of to converge to similar levels of accuracy ( mH).

Figure 11. Energy difference per site to the DMRG reference results of the 10- (a), 20- (b) and 30-site (c) hydrogen chain in a minimal basis for different orderings (natural and compact) and SD-based results (SDs) versus the number of walkers .
Comparison with DMRG reordering
It is well known that orbital reordering is crucial in DMRG. However, as discussed in our earlier works [15] [16] the reordering we seek in the context of spin couplings differs from the one in DMRG, both in motivation and in aim. In the context of DMRG, site reordering is very important for convergence with respect to the bond dimension (), and relies on concepts of entanglement and quantum (mutual) information [167–169, 172–178]. Our reordering schemes are strictly motivated by the intrinsic mechanisms of the cumulative spin couplings and aim at the compression of wave functions expanded in CSFs. The former is bound to the concept of locality, while our reordering is non-local.
In this section we provide a numerical proof that the best reordering in GUGA is not necessarily the best in DMRG, by analyzing the DMRG convergence using the natural and the optimal ordering for a chain of 30 hydrogen atoms. We used the BLOCK DMRG code[108, 167–169], which is able to use SU(2) symmetry and allows user-defined orbital orderings. We used the standard Fiedler algorithm [176, 179–181] to find the optimal order for the DMRG calculation, which yielded the natural order as a result. (Computational details and sample input files can be found in the Supplemental Material[136]) We then compared results obtained with the natural/Fiedler ordering and our “optimal” compact ordering with and without SU(2) conservation. As a reference we used a well-converged result using SU(2) and natural ordering. Figure 12 shows the results of this study.

Figure 12. 30-site hydrogen chain DMRG energy difference to Fiedler (natural order) reference result for different orbital ordering with and without spin-adaptation versus matrix dimension .
A one-dimensional hydrogen chain, with a large atom separation of 3.6 Å, is an optimal case for a MPS based algorithm like DMRG. This is reflected in the incredibly fast convergence of the natural ordered SU(2) results with a matrix dimension of . Similar to the GUGA-FCIQMC results, making use of the inherent SU(2) symmetry is very beneficial for the DMRG convergence. However, the 30-site hydrogen results indeed show a difference between the natural and compact ordering scheme. While the natural order results with SU(2) symmetry (blue circles) are already converged for , the compact ordering scheme, which introduces some long range interactions, requires a matrix dimension of to converge to similar levels of accuracy ( mH).
This demonstrates that the optimal ordering scheme for the GUGA framework differs from the DMRG one. While the latter is based on locality and entanglement arguments, the cumulative spin-coupling in the GUGA enables the inclusion of renormalization-group concepts to render the description of strongly-correlated many-body systems more compact (a non-local concept).
Conclusion
In this work we demonstrate a novel combined symmetric and unitary group approach, applied to the one-dimensional spin- Heisenberg model, which yields a more compact ground state wave function. We find that a specific ordering of the underlying lattice sites, governed by the symmetric group, , combined with the cumulative spin-coupling of the unitary group approach, , resembles a block-spin/real-space renormalization group. This induces a more compact description of the ground state where the most important CSF has a much higher weight than in the natural order. We derive an analytic formula for this compact CSF for the 1D Heisenberg model, and find a general description of this compact ordering which is easily applicable to 1D lattices of arbitrary size. We find that this state, up to leading order, already captures with high accuracy the spin-spin correlation behavior of the exact ground state wave function. A more compact ground state facilitates spin-adapted GUGA-FCIQMC calculations for larger lattice sites. We compare this found compact ordering to optimal ordering for DMRG calculations based on quantum mutual information, and find that they differ. Finally, we show that this concept also applies for more general lattice models, like the Hubbard model, and even to ab initio quantum chemical systems, in form of one-dimensional hydrogen chains. In future work we will investigate the utility of this combined spin-adapted unitary and symmetric group approach in more complex systems, including frustrated spin systems.
Acknowledgments
The authors gratefully acknowledge the support of the Max Planck Society.
Appendix
The spin-free formulation of the Heisenberg model
Expressing the local spin operators as [6]
with the Pauli matrices [182]
and the fermionic creation (annihilation) operators, of electrons with spin in spatial orbital . This results in the explicit expressions
where is the fermionic number operator of orbital and spin . If we express as
and consequently the individual terms as
we can combine the and terms as
For we can transform Eq. (32) to
With the spin-free excitation operators, and we can observe
leading to the relation
where . With Eq. (35) we can express the spin-spin interaction, Eq. (28), as
To express Eq. (36) entirely in spin-free terms we can rewrite
which allows us to write the spin-spin correlation function entirely in spin-free terms as
It is worth noting that the operator is diagonal, and for a Heisenberg model, with explicitly singly occupied orbitals, it is identical to one. This leads to the spin-free formulation of the Heisenberg model, (erratum to Ref. [14])
where indicates the summation over nearest neighbors and is the number of bonds. This enables a straightforward spin-free implementation of the Heisenberg model in GUGA-FCIQMC, where only exchange-type excitations have to be considered.
Dirac identity
There is an alternative way to derive the spin-free Heisenberg Hamiltonian in terms unitary group generators, , based on the Dirac identity[21, 101]. The Dirac identity[21] is given by
where indicates an exchange of electrons or spins and . Eq. (42) allowed Flocke and Karwowski[11] to straightforwardly express the Heisenberg Hamiltonian, Eq. (2), in terms of transpositions of spins , as
If we now use the observation by Flocke[101] that the action of the operator on a “Heisenberg wavefunction” (exclusively singly occupied orbitals /spins, no empty sites) is identical to a transposition
and similarly that the action of on is just the identity, , we can relate and obtain the same Hamiltonian in terms of unitary group generators as in Eq. (3).
Simulated annealing
Fig. 13 of our mixed stochastic simulated annealing (SA) approach. We start with an arbitrary CSF and order , usually taken as the natural order and the corresponding highest weighted state with alternating ’s and ’s, , and temperature and . We then use an inner SA loop (blue box in Figure 13), which finds the optimal order for this CSF . This is done by suggesting a new order , with 2-[153, 154] and 3-opt modifications[155] based on the Lin-Kernigham heuristic[156]. In the SA-spirit, this new order is always accepted if the diagonal matrix element, (Eq. (21)), is lower than

Figure 13. Sketch of the mixed stochastic minimization procedure.
, or with probability , with . We loop over this process of suggesting new orderings and lower the temperature every micro-iterations by a user defined ratio. This is done until convergence or a set amount of micro-iterations is reached.
The final ordering is then fed-back to the main SA cycle (orange box in 13), where a new CSF is suggested stochastically. For this we use the excitation generation routines in the GUGA-FCIQMC method [12, 13]. And for this new CSF we again use the inner loop (blue) to find the optimal ordering yielding the lowest . The new state is then accepted in the macro-cycle, if its energy, , is lower than or with probability , with . We also loop over this macro-cycle, where the temperature is lowered every macro-iterations by a user defined ratio, and do this until convergence or a set amount of macro-iterations is reached.
For small enough systems ( sites), where the Hilbert space is not yet too large, we can skip the stochastic part (orange box in 13) and perform the SA to find the optimal order (blue box in Figure 13) for every state in the Hilbert space, as this is an embarrassingly parallel task.
The GUGA-FCIQMC method
Here, we concisely summarize the main concepts of the GUGA-FCIQMC method. An in-depth description of the algorithm can be found in the literature [12, 14]. The FCIQMC algorithm [127, 128] is based on the imaginary-time () version of the Schrödinger equation,
Integrating Eq. (45) and performing a first-order Taylor expansion yields an iterable expression for the eigenstate,
which yields the ground state, , in the long time limit, . In FCIQMC, the full wave function, , is sampled stochastically by a set of so-called walkers and yields estimates for the ground- and excited-state [?] energies and properties [?] via the one- and two-body reduced density matrices. [?] More details can be found in the literature, [?, ?] especially in the recently published review article [13] and references therein.
In its original implementation FCIQMC is formulated in -conserving SDs, and thus, does not conserve the total spin quantum number, . For interpretability, control, and improved convergence properties, it is useful to impose the spin-rotational symmetry. We recently developed a spin-adapted implementation of FCIQMC in our lab [12, 14] [17], based on the UGA [4, 5] [126, 129, 130, 132, 186, 187, 188] and its graphical extension (GUGA). [120, 121] It was originally conceived for ab initio quantum chemical systems, but we recently applied it to study lattice models, like the two-dimensional Hubbard model [189–191].
The UGA is based on the spin-free formulation of quantum chemistry [125] and was pioneered by Paldus[4, 7], who found an efficient usage of the Gel’fand-Tsetlin basis—a general basis for any unitary group [192–194]—to the electronic structure problem[4, 5] [132]. Based on this work, Shavitt developed the graphical unitary group approach (GUGA) [120–122] which provides an elegant and highly effective way to calculate Hamiltonian matrix elements between these spin-adapted basis states, also called configuration state functions (CSFs).
Supplemental Material: Combined unitary and symmetric group approach applied to low-dimensional spin systems
Werner Dobrautz; Vamshi M. Katukuri; Nikolay A. Bogdanov; Daniel Kats; Giovanni Li Manni; Ali Alavi
In addition to this document, the Supplemental Material (which can be found at [1]) of this manuscript contains: dmrg.conf_10site_heisenberg_obc, dmrg.conf_10site_heisenberg_obc_compact_order, dmrg.conf_10site_heisenberg_obc_nonsu2, dmrg.conf_10site_hubbard_obc, dmrg.conf_10site_hydrogen the corresponding integral files: FCIDUMP_10site_heisenberg_obc, FCIDUMP_10site_hubbard_obc, FCIDUMP_10site_hydrogen, and files for user-defined orderings: 20_site_compact_order 30_site_compact_order 10_site_compact_order. Sample input for the LKH TSP solver for a 8-site problem lkh-8site.inp lkh-8site.problem and input files for the NECI FCIQMC code: neci-heisenberg-10-site-obc-bipartite.inp neci-heisenberg-10-site-obc-compact.inp neci-heisenberg-10-site-obc-natural.inp neci-heisenberg-10-site-obc-sds.inp neci-heisenberg-30-site-obc-compact.inp neci-hubbard-10-site-obc-compact.inp neci-hydrogen-10-site-compact.inp.
References to Figures, Tables and Equations from the main document are indicated by a “M-” prefix here.
Computational details
The DMRG calculations were performed with the BLOCK DMRG code[2, 3, 4, 5] with default settings and matrix dimension of , where not otherwise noted.
ED calculations for the Heisenberg model (and spin-spin correlations function extraction) were performed with the ALPS software package[6, 7] with standard settings. The LKH[8, 9, 10] calculations to verify our simulated annealing implementation were performed with version 2.0.9, available at http://webhotel4.ruc.dk/~keld/research/LKH/ and default settings. Sample input files to reproduce our approach are provided within this Supplemental Material[1]. We want to note, that although the TSP, for which LKH was implemented, only has positive entries in the cost matrix, as it indicates distances, the code is also able to solve for negative cost matrix entries, which are given by the in
If this would be not possible, this could be easily fixed by a shift of the elements by a positive constant.
The simulated annealing calculations were performed with a starting temperature of , and for usually maximally cycles in total, or after convergence of the diagonal matrix elements, Eq. (1) was achieved for a long enough period of time. The temperature was lowered by a factor of 1 every 1000 steps.
The GUGA-FCIQMC calculations for the Heisenberg lattices up to 36 sites, shown in Fig. M-8 of the main document, were performed with the original[11] and numerically exact non-initiator implementation. Above 36 lattice sites, an initiator threshold of was chosen and the calculations were checked for convergence up to a maximum walker number of . The GUGA-FCIQMC results shown in Figs. M-9–M-11 of the main document were performed with the initiator approximation[12] with . Sample input files for the GUGA-FCIQMC calculations can be found within this Supplemental Material[1].
CSFs as linear combination of SDs
Table I shows the expansion of the 4-site CSFs and and Table II the 6-site CSFs , and in terms of SDs following the transformation of notation of Refs. [13, 14], where the subscripts indicate the underlying orbital order, as explained in the main document. To directly compare the expansion of CSFs into SDs under different orbital orderings, we “map” the resulting SDs to the natural ordering. As an example the CSF has the SD in it’s linear expansion. This SD is then reordered to natural ordering, like in the first column of Tables I and II. We want to emphasize here again, that this expansion of CSFs into SDs is not necessary in the (G)UGA approach, but is only done for demonstrative purposes here.
6-SITE HEISENBERG HAMILTONIAN MATRICES FOR DIFFERENT ORDERINGS
For demonstrative purposes we want to show the explicit Heisenberg Hamiltonians for the 6-site lattice with PBC and OBC in the natural, bipartite and compact orderings here. We also want to show the equivalence of the cumulative GUGA compact ordering: , and the separate renormalization approach: mentioned in the main text here. The Hilbert space in for the 6-site Heisenberg model is given by
where we omit the ordering subscript for readability. For PBC the Hamiltonians in natural, bipartite and compact ordering are given in Fig. 1 and for OBC in Fig. 2.
ORDERING FOR 4 × 2 LADDER
Fig. 3 shows different orderings for a 4 × 2 Heisenberg ladder with PCB (a-c) and OBC (d). We tested the effect of the two different ordering identified in Flocke and Karwowski[15] on the reference weight in the UGA. The natural order, Fig. 3a, is the preferred one in Flocke and Karwowski[15] and equivalent to our natural order concept, while the order shown in Fig. 3b was found to be detrimental to Flocke and Karwowskis approach and is equivalent to a bipartite ordering and yields a drastically improved reference weight in the UGA. Fig. 3c shows the optimal order and reference CSF for the 4 × 2 Heisenberg ladder with PCB, which has an even larger reference weight of ≈ 96.7% compared to the already large weight of ≈ 95.8% in the bipartite order. Fig. 3d shows the optimal order and reference CSF for the 4 × 2 Heisenberg ladder with OCB, which has the same structure as the optimal CSF found in the 1D case.

Figure 1 (PDF p. 19). 6-site Heisenberg Hamiltonians with PBC in natural (nat.), bipartite (bip.) and compact (com.) order.

Figure 2 (PDF p. 19). 6-site Heisenberg Hamiltonians with OBC in natural (nat.), bipartite (bip.) and compact (com.) order.

Figure 3 (PDF p. 19). Weight and reference for the 4 × 2 ladder with PBC in (a) natural (equivalent to the order A in Flocke and Karwowski[15]), (b) compact and (c) order B in Flocke and Karwowski[15], as well as (d) compact order with OBC.
References
- [1]“See supplemental material at [url will be inserted by publisher] for computational details, examples of expansion of CSFs in terms of SDs, reference weight and orderings for a 4 × 2 heisenberg ladder and sample input files for BLOCK DMRG, NECI FCIQMC and the LKH TSP calculations.” URLwillbeinsertedbypublisher (2021).
- [2]G. K.-L. Chan and M. Head-Gordon, J. Chem. Phys. 116, 4462 (2002).
- [3]D. Ghosh, J. Hachmann, T. Yanai, and G. K.-L. Chan, J. Chem. Phys. 128, 144117 (2008).
- [4]S. Sharma and G. K.-L. Chan, J. Chem. Phys. 136, 124121 (2009).
- [5]R. Olivares-Amaya, W. Hu, N. Nakatani, S. Sharma, J. Yang, and G. K.-L. Chan, J. Chem. Phys. 142, 034102 (2010).
- [6]B. Bauer, L. D. Carr, H. G. Evertz, A. Feiguin, J. Freire, S. Fuchs, L. Gamper, J. Gukelberger, E. Gull, S. Guertler, A. Hehn, R. Igarashi, S. V. Isakov, D. Koop, P. N. Ma, P. Mates, H. Matsuo, O. Parcollet, G. Pawlowski, J. D. Picon, L. Pollet, E. Santos, V. W. Scarola, P. Schollwöck, C. Silva, B. Surer, S. Todo, S. Trebst, M. Troyer, M. L. Wall, P. Werner, and S. Wessel, J. Stat. Mech: Theory Exp. 2011, P05001 (2011).
- [7]M. Walleberger, S. Isakov, A. Gaenko, J. Kleinhenz, I. Krivenko, R. Levy, J. Li, H. Shinaoka, S. Todo, T. Chen, X. Chen, J. P. F. LeBlanc, J. E. Paki, H. Terletska, M. Troyer, and E. Gull, “Updated core libraries of the alps project,” (2018), arXiv:1811.08331 [physics.comp-ph].
- [8]K. Helsgaun, Eur. J. Oper. Res. 106 (2000).
- [9]K. Helsgaun, Math. Program. Comput. 1, 119 (2009).
- [10]R. Tinós, K. Helsgaun, and D. Whitley, in Parallel Problem Solving from Nature – PPSN XV (Springer International Publishing, 2018) pp. 95–107.DOI
- [11]G. H. Booth, A. J. W. Thom, and A. Alavi, J. Chem. Phys. 131, 054106 (2009).
- [12]D. Cleland, G. H. Booth, and A. Alavi, J. Chem. Phys. 132, 041103 (2010).
- [13]I. Shavitt, in The Unitary Group for the Evaluation of Electronic Energy Matrix Elements, edited by J. Hinze (Springer Berlin Heidelberg, Berlin, Heidelberg, 1981) pp. 51–99.
- [14]W. G. Harter and C. W. Patterson, A Unitary Calculus for Electronic Orbitals (Springer-Verlag, 1976).DOI
- [15]N. Flocke and J. Karwowski, Phys. Rev. B 55, 8287 (1997).