betaFeedback

WorksPhysics and Astronomy

Second and third harmonic generation of acoustic waves in a nonlinear elastic solid in one space dimension

Abstract

The generation of second and third harmonics by an acoustic wave propagating along one dimension in a weakly nonlinear elastic medium that is loaded harmonically in time with frequency ω0ω_0 at a single point in space, is analyzed by successive approximations starting with the linear case. It is noted that nonlinear waves have a speed of propagation that depends on their amplitude. It is also noted that both a free medium as well as a loaded medium generate higher harmonics, but that although the second harmonic of the free medium scales like the square of the linear wave, this is no longer the case when the medium is externally loaded. The shift in speed of propagation due to the nonlinearities is determined imposing that there be no resonant terms in a successive approximation solution scheme to the homogeneous problem. The result is then used to solve the inhomogeneous case also by successive approximations, up to the third order. At second order, the result is a second harmonic wave whose amplitude is modulated by a long wave, whose wavelength is inversely proportional to the shift in the speed of propagation of the linear wave due to nonlinearities. The amplitude of the long modulating wave scales like the amplitude of the linear wave to the four thirds. At short distances from the source a scaling proportional to the amplitude of the linear wave squared is recovered, as is a second harmonic amplitude that grows linearly with distance from the source and depends on the third-order elastic constant only. The third order solution is the sum of four amplitude-modulated waves, two of them oscillate with frequency ω0ω_0 and the other two, third harmonics, with 3ω03ω_0. In each pair, one term scales like the amplitude of the linear wave to the five-thirds, and the other to the seven-thirds.

Introduction

Second, and third, harmonic generation by an acoustic wave traveling in a weakly nonlinear elastic solid has become an increasingly useful tool in a variety of solid mechanics contexts. The state of the art up to 2014 was reviewed by Matlack et al. [1]. More recently, Achenbach and Wang [2] have studied the generation of higher harmonic surface waves on a half-space of incompressible material. Sahu et al. [3] have correlated the generation of second harmonics with the microstructure of P92 steel, and Fuchs et al. [4] have used analytical modeling to relate the formation of precipitates in stainless steel to the behavior of a nonlinearity parameter. Belotti et al. [5] have measured the sensitivity of nonlinear parameters to the presence of dislocations in additively manufactured materials.

Nonlinear parameters appear to be substantially more sensitive to microstructural changes than linear ones, and this has motivated considerable research into the use of nonlinear effects as probes of the microstructure of solid materials. For example, Espinoza et al. [6] noted that second harmonic generation (SHG) is twenty times more sensitive to changes in dislocation density in aluminum than linear Resonant Ultrasound Spectroscopy (RUS), with the added bonus that it is simpler to implement experimentally; and Sosa et al. [7] showed, using measurements with plastically deformed brass, that measuring the variation in the generation of a second harmonic can potentially discriminate between slip and twinning as microscopic mechanisms during plastic deformation. Chakrapani et al. [8] have related the nonlinearities associated to Nonlinear Resonant Ultrasound Spectroscopy (NRUS) with third order elastic constants. Sahu et al. [3] have used nonlinear Rayleigh waves to test the effect of precipitation hardening during tempering of P92 steel. NRUS has been used by Meo et al. [9] to test for damage in composites of interest to the aerospace industry, and in bone by Muller et al. [10] and by Haupert et al. [11]. Payan et al. [12, 13] have used nonlinear acoustic techniques to asses damage un concrete. The measurement of second, and higher, harmonics as a way to test for the presence of cracks in glass has been advocated by Persson et al. [14]. The interest of studying third harmonic generation for non-destructive testing has been highlighted by Kube and Arguelles [15], and Lissenden [16] has provided a tutorial reviewing the basic principles underpinning the behavior of nonlinear ultrasonic guided waves from a nondestructive evaluation perspective. The actual measurement of the nonlinear parameters characterizing a solid involve a number of subtleties, a topic that has been reviewed by Jhang et al. [17] and Park et al. [18]. Within a geophysical context, the importance of nonlinear elastic behavior has been highlighted by Ostrovsky and Johnson [19]. McCall [20] developed a systematic study of nonlinear elastic wave behavior in an attenuating medium, and quite recently Martin et al. [21] and O’Brien [22] have numerically modeled wave propagation in nonlinear viscoelastic media, a topic of interest both in seismology and exploration geophysics. De Lima and Hamilton have studied nonlinear waves in plates [23].

A common feature of the analysis used in several of the works mentioned above is to consider that the amplitude A2A_2 of the second harmonic and the amplitude A1A_1 of the linear wave measured by a receiver at a distance xx from an emitter at angular frequency ω0\omega_0 in a medium of speed of sound c0c_0 and nonlinear parameter β\beta (defined precisely in the next section) are related by A2=βxω02A124c02A_2 = \frac{\beta x \omega_0^2 A_1^2}{4c_0^2}. It has also been recognized that this solution must be approximate since it increases without bounds away from the emitter, so xx must be small. But: small with respect to what? Not with respect to wavelength, since radiation itself is ill-defined at distances from the emitter that are smaller than wavelength. One possibility is to think of attenuation as providing a length scale where xx must be small [20]. However, it still is difficult to imagine how, in an elastic medium without losses, injecting a finite amount of energy per unit time could lead to a diverging energy flux away from the emitter.

A well-known feature of nonlinear oscillators is that their frequency of oscillation depends on amplitude [24]. One possible way to compute this effect is through a successive approximation scheme starting from the linear case, for small deviations from said linear behavior, imposing that, in the successive approximation scheme resonant, also called secular, terms do not appear. This approach has been used to computed the amplitude-dependent changes in the normal mode frequencies of linear chains of masses joined by nonlinear springs [25, 26]. The fact that a continuous elastic medium ought to be the limit of a discrete chain of oscillators in the limit of very small interparticle distance will be used in the results to be obtained below.

In this paper we provide a solution for the one-dimensional propagation of acoustic waves in a non-viscous medium with second and third order nonlinearities in the stress-strain relation that is valid, and bounded, for an arbitrary distance xx between emitter and receiver. A length scale is provided by a combination of the amplitude of the linear wave, its frequency, the speed of sound and the nonlinear parameters. When xx is small with respect to this parameter (Eq. (118) below), the relation mentioned above is recovered.

The problem

We wish to solve the equation

1c02∂2u∂t2−∂2u∂x2=S0δ(x)sin⁡ω0t+β∂∂x(∂u∂x)2+γ∂∂x(∂u∂x)3(1)\frac{1}{c_0^2}\frac{\partial^2 u}{\partial t^2}-\frac{\partial^2 u}{\partial x^2}=S_0\delta(x)\sin\omega_0 t+\beta\frac{\partial}{\partial x}\left(\frac{\partial u}{\partial x}\right)^2+\gamma\frac{\partial}{\partial x}\left(\frac{\partial u}{\partial x}\right)^3 \tag*{(1)}

for a displacement u(x,t)u(x,t) as a function of position xx and time tt on the whole real line, −∞<x<∞-\infty< x < \infty, proceeding by successive approximations, taking the linear equation as the leading order. This assumes that the nonlinear terms introduce small corrections to the linear behavior. Notice that the frequency ω0\omega_0 introduces a time scale, and together with the speed of sound c0c_0 there is a length scale (ω0/c0)(\omega_0/c_0). There is also a dimensionless (source) amplitude that is expected to be small: S0≪1S_0 \ll1. The dimensionless parameters β\beta and γ\gamma, however, are not expected to be small, since they, as well as c0c_0, are material constants, related to the second, third, and fourth order elastic constants of the nonlinear solid (see for example [20]) so the success of the approximation scheme rests on gradients of uu being small (i.e., small strains): In other words, high wavenumbers will be forbidden. As discussed in the review of Zarembo and Krasil’nikov [27], it is not possible within this framework, for example, to discuss the steepening of wavefronts such as would be associated with shock waves.

The continuum problem—linear approximation

If we ignore the nonlinear terms in (1) we have

1c02∂2u(1)∂t2−∂2u(1)∂x2=S0δ(x)sin⁡ω0t.(2)\frac{1}{c_0^2}\frac{\partial^2 u^{(1)}}{\partial t^2}-\frac{\partial^2 u^{(1)}}{\partial x^2}=S_0\delta(x)\sin\omega_0t . \tag*{(2)}

This is a linear equation whose solution, for x≠0x \ne0, is

u(1)(x,t)=f(x−c0t)+g(x+c0t).(3)u^{(1)}(x,t)=f(x-c_0t)+g(x+c_0t). \tag*{(3)}

We wish to have waves propagating to the right for x>0x > 0 and to the left for x<0x < 0. Additionally, u(x,t)u(x,t) must be continuous at the origin and its first derivative must have a discontinuity at the origin given by

−∂u∂x∣0++∂u∂x∣0−=S0sin⁡ω0t(4)-\left.\frac{\partial u}{\partial x}\right|_{0+}+\left.\frac{\partial u}{\partial x}\right|_{0-}=S_0\sin\omega_0t \tag*{(4)}

The solution to this problem is

u(1)(x,t)=−c0S02ω0cos⁡ω0(t−∣x∣c0).(5)u^{(1)}(x,t)=-\frac{c_0S_0}{2\omega_0}\cos\omega_0\left(t-\frac{|x|}{c_0}\right). \tag*{(5)}

The continuum problem—Fourier transform in space

To continue, a possible approach (see for example [20]) is to take Fourier transform of (1) in time and to work in the frequency domain, taking advantage of the fact that the localized-in-xx source yields the equation for a well-known Green’s function. We will proceed differently, taking Fourier transforms (FT) in space:

f(x)≡∫−∞∞dk2π f^(k)eikx,f^(k)≡∫−∞∞dx f(x)e−ikx,δ(x−x′)=∫−∞∞dk2πeik(x−x′)(6)f(x)\equiv\int_{-\infty}^{\infty}\frac{dk}{2\pi}\,\hat{f}(k)e^{ikx},\qquad\hat{f}(k)\equiv\int_{-\infty}^{\infty}dx\,f(x)e^{-ikx},\qquad\delta(x-x')=\int_{-\infty}^{\infty}\frac{dk}{2\pi}e^{ik(x-x')} \tag*{(6)}

and we shall use

df^dx=ikf^(k)(7)\frac{\widehat{df}}{dx}=ik\hat{f}(k) \tag*{(7)}

as well as

fg^=f^∗g^≡12π∫−∞∞dk′ f^(k′)g^(k−k′)=12π∫−∞∞dk′ f^(k−k′)g^(k′)(8)\widehat{fg}=\hat{f}*\hat{g}\equiv\frac{1}{2\pi}\int_{-\infty}^{\infty}dk'\,\hat{f}(k')\hat{g}(k-k')=\frac{1}{2\pi}\int_{-\infty}^{\infty}dk'\,\hat{f}(k-k')\hat{g}(k') \tag*{(8)}

So, taking the FT of (1) we have

1c02d2u^dt2+k2u^=S0sin⁡ω0t−iβk2π∫−∞∞dk′ k′(k−k′)u^(k′)u^(k−k′)+γk(2π)2∫−∞∞dk′(k−k′)u^(k−k′)∫−∞∞dk′′(k′−k′′)k′′u^(k′−k′′)u^(k′′).(9)\frac{1}{c_0^2}\frac{d^2\hat{u}}{dt^2}+k^2\hat{u}=S_0\sin\omega_0t-\frac{i\beta k}{2\pi}\int_{-\infty}^{\infty}dk'\,k'(k-k')\hat{u}(k')\hat{u}(k-k') +\frac{\gamma k}{(2\pi)^2}\int_{-\infty}^{\infty}dk'(k-k')\hat{u}(k-k')\int_{-\infty}^{\infty}dk''(k'-k'')k''\hat{u}(k'-k'')\hat{u}(k''). \tag*{(9)}

Note that the FT of the displacement, u^(k)\hat{u}(k), has dimensions of (length)2^2. Also, the independent variables will be omitted from the equations when the meaning is clear. Eq. (9) can be interpreted as a set of nonlinearly coupled harmonic oscillators, labeled by the real number kk, with linear eigenfrequency c0kc_0k, all of them loaded by the same external, periodic, force with frequency ω0\omega_0 and dimensionless amplitude S0S_0.

As already mentioned, we shall solve this system by iteration:

u^(k,t)=u^(1)(k,t)+u^(2)(k,t)+u^(3)(k,t)+…(10)\hat{u}(k,t)=\hat{u}^{(1)}(k,t)+\hat{u}^{(2)}(k,t)+\hat{u}^{(3)}(k,t)+\ldots \tag*{(10)}

In this development we expect to encounter the fact that, for nonlinear waves, the speed of propagation is modified by a term that depends on the amplitude of the wave. More precisely, within this FT context, we will allow the oscillators to respond periodically to the periodic forcing, but with a period that differs from said forcing period. This is a reflection of the fact that the frequency of oscillation of each (k(k-th) oscillator differs from c0kc_0 k by an amount that depends on the amplitude of the oscillation. Substituting (10) into (9) we have

References

  1. [8]S. K. Chakrapani and D. J. Barnard, Determination of acoustic nonlinearity parameter (β) using nonlinear resonance ultrasound spectroscopy: Theory and experiment, The Journal of the Acoustical Society of America 141, 919 (2017).DOI
  2. [9]M. Meo, U. Polimeno, and G. Zumpano, Detecting damage in composite material using nonlinear elastic wave spectroscopy methods, Applied Composite Materials 15, 115 (2008).DOI
  3. [10]M. Muller, A. Sutin, R. Guyer, M. Talmant, P. Laugier, and P. A. Johnson, Nonlinear resonant ultrasound spectroscopy (nrus) applied to damage assessment in bone, The Journal of the Acoustical Society of America 118, 3946 (2005).
  4. [11]S. Haupert, S. Guérard, D. Mitton, F. Peyrin, and P. Laugier, Quantification of nonlinear elasticity for the evaluation of submillimeter crack length in cortical bone, Journal of the mechanical behavior of biomedical materials 48, 210 (2015).DOI
  5. [12]C. Payan, V. Garnier, J. Moysan, and P. Johnson, Applying nonlinear resonant ultrasound spectroscopy to improving thermal damage assessment in concrete, The Journal of the Acoustical Society of America 121, EL125 (2007).pubmed.ncbi.nlm.nih.gov/17471756
  6. [13]C. Payan, T. J. Ulrich, P.-Y. Le Bas, T. Saleh, and M. Guimaraes, Quantitative linear and nonlinear resonance inspection techniques and analysis for material characterization: Application to concrete thermal damage, The Journal of the Acoustical Society of America 136, 537 (2014).DOI
  7. [14]K. Persson, K. Haller, S. Karlsson, and M. Kozlowski, Non-destructive testing of the strength of glass by a non-linear ultrasonic method, in Challenging Glass Conference Proceedings, Vol. 7 (2020).DOI
  8. [15]C. M. Kube and A. P. Arguelles, Ultrasonic harmonic generation from materials with up to cubic nonlinearity, The Journal of the Acoustical Society of America 142, EL224 (2017).DOI
  9. [16]C. J. Lissenden, Nonlinear ultrasonic guided waves—principles for nondestructive evaluation, Journal of Applied Physics 129 (2021).DOI
  10. [17]K.-Y. Jhang, S. Choi, and J. Kim, Measurement of nonlinear ultrasonic parameters from higher harmonics, in Measurement of Nonlinear Ultrasonic Characteristics, edited by K.-Y. Jhang, C. J. Lissenden, I. Solodov, Y. Ohara, and V. Gusev (Springer, 2020) pp. 9–60.DOI
  11. [18]S.-H. Park, J. Kim, D.-G. Song, S. Choi, and K.-Y. Jhang, Measurement of absolute acoustic nonlinearity parameter using laser-ultrasonic detection, Applied Sciences 11, 4175 (2021).DOI
  12. [19]L. A. Ostrovsky and P. A. Johnson, Dynamic nonlinear elasticity in geomaterials, La Rivista del Nuovo Cimento 24, 1 (2001).DOI
  13. [20]K. R. McCall, Theoretical study of nonlinear elastic wave propagation, Journal of Geophysical Research: Solid Earth 99, 2591 (1994).DOI
  14. [21]R. Martin, L. Bodet, V. Tournat, and F. Rejiba, Seismic wave propagation in nonlinear viscoelastic media using the auxiliary differential equation method, Geophysical Journal International 216, 453 (2018).DOI
  15. [22]G. S. O’Brien, A lattice method for seismic wave propagation in nonlinear viscoelastic media, Geophysical Journal International 224, 1572 (2020).DOI
  16. [23]W. De Lima and M. Hamilton, Finite-amplitude waves in isotropic elastic plates, Journal of sound and vibration 265, 819 (2003).
  17. [24]A. H. Nayfeh and D. T. Mook, Nonlinear oscillations (John Wiley & Sons, 2008).
  18. [25]N. Z. Swin­teck, K. Muralidharan, and P. A. Deymier, Phonon scattering in one-dimensional anharmonic crystals and superlattices: Analytical and numerical study, Journal of vibration and acoustics 135, 041016 (2013).DOI
  19. [26]K. Manktelow, M. J. Leamy, and M. Ruzzene, Multiple scales analysis of wave–wave interactions in a cubically nonlinear monatomic chain, Nonlinear Dynamics 63, 193 (2011).DOI
  20. [27]L. K. Zarembo and V. A. Krasil’nikov, Nonlinear phenomena in the propagation of elastic waves in solids, Soviet Physics Uspekhi 13, 778 (1971).
  21. [28]I. C. Khoo and Y. K. Wang, Multiple time scale analysis of an anharmonic crystal, Journal of Mathematical Physics 17, 222 (1976).DOI
  22. [29]Y. Wang and J. D. Achenbach, Interesting effects in harmonic generation by plane elastic waves, Acta Mechanica Sinica 33, 754 (2017).DOI

Paper details

vlnc:W_uc7kteyq
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents