betaFeedback

WorksPhysics and Astronomy

Fundamentals on Dependence of Volume on Pressure and Temperature

Abstract

The common wisdom that volume decreases with pressure and increases with temperature is analyzed in terms of Hillert nonequilibrium thermodynamics in the present work. It is shown that the derivative of volume to pressure in a stable system is always negative, i.e., volume decreases with the increase of pressure, when all other natural variables of the system are kept constant. This originates from the stability requirement that the conjugate variables, such as volume and negative pressure, must change in the same direction in a stable system. Consequently, since volume and temperature are not conjugate variables, they do not have to change in the same direction and thus do change in opposite directions in both natural and man-made systems. It is shown that the decrease of volume with the increase of temperature, commonly referred as negative thermal expansion (NTE) in the literature, originates from the statistical competitions of configurations in the system when the volumes of metastable configurations are smaller than that of the ground-state configuration. It is demonstrated that the zentropy theory can concisely explain and accurately predict NTE based on the density functional theory without fitting parameters.

Accepted by Physics and Chemistry of Minerals – Tribute to A. Navrotsky

Introduction

During the “Navrotsky International Symposium” in celebrating her 80{sup}th birthday held at the 2023 Sustainable Industrial Processing Summit and Exhibition (SIPS 2023) in Panama, Prof. Navrotsky, the leading expert on the effects of pressure on materials properties {citep}1–3, emphasized that the volume of a substance must decrease with the increase of pressure. Apparently, some people observed and thus believed the opposite. Incidentally, there was a publication at the same time on the very same topic concerning the hP8-to-cP4 structural transition in $\mathrm{Ni}_{3}\mathrm{In}$ compounds at high temperature and pressure {citet}Bertoldi et al. 4. It discussed the seemingly “anomalous behavior” reported in the literature that the high-temperature and high-pressure polymorph in several $\mathrm{A}_{3}\mathrm{B}$ compounds has a larger volume than their normal form {citep}5. {citet}Webb et al. 5 attributed the origin of the “volume anomaly” to significant larger compressibility in the high-temperature and high-pressure polymorph. On the other hand, by using density-functional-theory (DFT) calculations, {citet}Bertoldi et al. 4` pointed out that this “anomalous behavior” was due to the combined effects of temperature and pressure in the experiments rather than the pressure alone and concluded that there was no volume anomaly in those compounds as the volume is larger at high temperature.

However, it is known that the volume in a system does not always increase with temperature. A well-known example is that the volume of water decreases with the increase of temperature at temperature below 277 K (4°C), and when it freezes into ice, the volume increases further, which is why icebergs float in water. It is also known from experiments and DFT calculations that the volume of ice decreases with the increase of temperature at temperature below 70 K [6]. This phenomenon is commonly referred as negative thermal expansion (NTE). In 1897, Guillaume 7 reported the first manmade NTE material, i.e., an Fe65Ni35Fe_{65}Ni_{35} alloy with zero thermal expansion (ZTE) at room temperature, now commonly called Invar. In 1996, a centennial symposium was held to review the state-of-the-art in the development and understanding of Invar since its discovery [8]. While many theories were developed to describe NTE mechanisms in various materials, aiming for phenomenological interpretation of experimental observations [8, 9, 10, 11, 12, 13, 14], the author’s group developed a predictive multiscale entropy approach [15] (recently termed zentropy theory [16]) that was able to accurately predict the ZTE and NTE in Fe3PtFe_3Pt from DFT calculations without fitting parameters [17].

In the present paper, the volume as a function of pressure and temperature is discussed in terms of Hillert nonequilibrium thermodynamics [18, 19] and the zentropy theory [16, 20, 21] by considering stability of an equilibrium system and internal processes inside the system.

Review of Hillert Nonequilibrium Thermodynamics

A system can typically have three independent exchanges with its surroundings, i.e., heat (dQdQ), work (dWdW), and mass (dNidN_i) for the mole of component ii, resulting in the internal energy change of the system, dUdU, as follows in terms of the 1st law of thermodynamics

dU=dQ+dW+∑i=1cUidNi(1)dU = dQ + dW + \sum_{i=1}^{c} U_i dN_i \tag*{(1)}

where UiU_i is the partial internal energy of component ii. It is noted that Eq. 1 does not contain information whether the system is in its internal equilibrium. Following Hillert 22, one can write the entropy change of the system as follows [21, 22, 23, 24]

dS=dQT+∑i=1cSidNi+dipS(2)dS = \frac{dQ}{T} + \sum_{i=1}^{c} S_i dN_i + d_{ip}S \tag*{(2)}

where SiS_i is the partial entropy of component ii, and dipSd_{ip}S the entropy production due to independent internal processes (ipip) in the system. Based on the 2nd law of thermodynamics, an independent irreversible internal process must result in a positive entropy production as follows

dipS>0(3)d_{ip}S > 0 \tag*{(3)}

Combining Eq. (1) and Eq. (2) gives the combined law of thermodynamics as follows

dU=TdS+dW+∑i=1cμidNi−TdipS(4)dU = T dS + dW + \sum_{i=1}^{c} \mu_i dN_i - T d_{ip}S \tag*{(4)}
μi=Ui−TSi=(∂U∂Ni)S,dW=0,dipS=0,Nj≠i(5)\mu_i = U_i - T S_i = \left(\frac{\partial U}{\partial N_i}\right)_{S,dW=0,d_{ip}S=0,N_{j\ne i}} \tag*{(5)}

where μi\mu_i is the chemical potential of component ii and depends on both partial internal energy and partial entropy of the component. (4) was named by the present author as Hillert nonequilibrium thermodynamics or Hillert thermodynamics in order to differentiate from Gibbs equilibrium thermodynamics [18, 19]. Gibbs equilibrium thermodynamics or Gibbs thermodynamics is with dipS=0d_{ip}S = 0 as follows

dU=TdS+dW+∑i=1cμidNi=∑a=1nYadXa(6)dU = T dS + dW + \sum_{i=1}^{c} \mu_i dN_i = \sum_{a=1}^{n} Y^a dX^a \tag*{(6)}

where YaY^a and XaX^a represent the pairs of conjugate variables with YaY^a for potentials, such as temperature, stress or pressure, electrical and magnetic fields, and chemical potential, and XaX^a for molar quantities, such as entropy, strain or volume, electrical and magnetic displacements, and moles of components. XaX^a:s are the independent variables of UU and are termed as its natural variables [22]. They are related by the following equation

Ya=(∂U∂Xa)Xb≠a(7)Y^{a}=\left(\frac{\partial U}{\partial X^{a}}\right)_{X^{b\ne a}} \tag*{(7)}

For simplicity in terms of purpose of the present work, let us consider one independent internal process in the system and write the entropy production by the following 2{sup}nd order Taylor expansion [22, 23, 24],

TdipS=D dξ−12D2(dξ)2(8)T d_{ip}S=D\,d\xi-\frac{1}{2}D_{2}(d\xi)^{2} \tag*{(8)}

where D=−(∂U∂ξ)XaD=-\left(\frac{\partial U}{\partial\xi}\right)_{X^{a}} is the driving force for the internal process, dξd\xi the change of the internal variable that represents the internal process driving by DD, and D2=(∂2U∂ξ2)XaD_{2}=\left(\frac{\partial^{2}U}{\partial\xi^{2}}\right)_{X^{a}} is related to the stability and criticality of the system due to the internal process [15]. For systems without any internal processes, i.e., dipS=0d_{ip}S=0 or dξ=0d\xi=0, Hillert [22] discussed two types of equilibria: one without driving force for any internal processes, i.e., D≤0D\le0 for a full equilibrium state, and the other with driving force for some internal processes, but those internal processes are not possible due to internal constraints, i.e., D>0D>0 and dξ=0d\xi=0 so the system is under freezing-in conditions with respect to those internal processes.

Through a virtual experiment by moving a molar quantity from one location to another inside the system, denoted by dξ=dXjd\xi=dX_j, Hillert [22] showed that at equilibrium, the conjugate potential of XjX_j, i.e., YjY_j, inside the system must have the same value everywhere inside the system, represented by the subscript of the variables, i.e., all the potentials must be homogeneous inside the system. This is shown by the following equation when dXjdX_j is moved from position ’ with potential Yj′Y'_j to position " with potential Yj′′Y_j'' without any exchange between the system and its surroundings, i.e., dXα=0dX^\alpha= 0 and dU=0dU = 0,

dU=−TdipS=−Ddξ=(Yj′′−Yj′)dXj=0(9)dU = -T d_{ip}S = -D d\xi= (Y_j'' - Y_j')dX_j = 0 \tag*{(9)}

resulting in Yj′′=Yj′Y_j'' = Y_j', i.e., potentials are homogeneous everywhere in the system.

The stability of an equilibrium system is determined by the sign of D2D_2. By the same virtual experiment, the following equation can be obtained from (8)

dU=−TdipS=12D2(dξ)2=12∂2U∂ξ2(dξ)2(10)dU = -T d_{ip}S = \frac{1}{2}D_2(d\xi)^2 = \frac{1}{2}\frac{\partial^2 U}{\partial\xi^2}(d\xi)^2 \tag*{(10)}

As the 2nd law of thermodynamics requires dipS≤0d_{ip}S \leq0 for an equilibrium system, one must have

D2=∂2U∂ξ2=∂2U∂Xj2=∂Yj∂Xj≥0(11)D_2 = \frac{\partial^2 U}{\partial\xi^2} = \frac{\partial^2 U}{\partial X_j^2} = \frac{\partial Y_j}{\partial X_j} \geq0 \tag*{(11)}

i.e., the conjugate pair of variables must change in the direction. At the limit of stability with ∂Yj∂Xj=0\frac{\partial Y_j}{\partial X_j} = 0, the system becomes unstable with respect to internal fluctuation of XjX_j, resulting in its positive divergence as follows

∂Xj∂Yj=+∞(12)\frac{\partial X_j}{\partial Y_j} = +\infty \tag*{(12)}

If the equilibrium is metastable, the system moves to its more stable state without barrier at the limit of stability of ∂Yj∂Xj=0\frac{\partial Y_j}{\partial X_j} = 0, i.e., the limit of stability represents a saddle point on the energy landscape. If the equilibrium is a globally stable one, the limit of the stability represents the critical point in the system where the system changes from stable to unstable without becoming metastable first, such as the quantum criticality at 0 K [20, 25, 26, 27, 28, 29, 30, 31]. Since a critical point in an equilibrium system is a zero-dimension geometric feature in a space represented by the nn independent variables shown by Eq. (6), all derivatives of free energy up to (n+1)th(n + 1)^{\mathrm{th}} order are zero, and thus defined critical point was termed as invariant critical point (ICP) [32].

Review of entropy and zentropy

The entropy change of a system is represented by Eq. (2), and its absolute value can be obtained by integration of experimentally measured heat capacity using the 3rd law of thermodynamics stipulating S=0S = 0 at T=0 KT = 0\ \mathrm{K} as follows

S=∫0TCPT dT(13)S = \int_{0}^{T} \frac{C_{P}}{T}\,\mathrm{d}T \tag*{(13)}

It is commonly referred as Clausius entropy in the literature.

Theoretically, entropy is discussed in terms of statistical mechanics invented by Gibbs [33] based on the foundation established by Clausius, Maxwell, and Boltzmann. Gibbs “imagined a great number of systems of the same nature, but differing in the configurations and velocities which they have at a given instant, and differing not merely infinitesimally, but it may be so as to embrace every conceivable combination of configuration and velocities”. The entropy among the configurations is obtained as follows

Sconf=−kB∑k=1mpkln⁡pk(14)S^{\mathrm{conf}} = -k_{B}\sum_{k=1}^{m} p^{k}\ln p^{k} \tag*{(14)}

where mm is the number of independent configurations, pkp^{k} the probability of configuration kk, and kBk_{B} the Boltzmann constant.

It is evident that Eq. (14) does not include the entropy possessed by each configuration in the system. Our zentropy theory stipulates the total entropy of the system as follows [15, 16]

S=∑k=1mpkSk−kB∑k=1mpkln⁡pk=∫0TCPT dT(15)S = \sum_{k=1}^{m} p^k S^k - k_B \sum_{k=1}^{m} p^k \ln p^k = \int_{0}^{T} \frac{C_P}{T} \, dT \tag*{(15)}

where SkS^k is the entropy of configuration kk. In our initial work [6, 17, 34, 35], Eq. (15) was derived by assuming that the partition function of each configuration should be evaluated from its free energy rather than its internal energy. It was later realized that one should start from Eq. (15) instead [15], which prompted the naming of the approach as zentropy theory [16].

Consequently, Helmholtz energy and statistical mechanics of a canonical ensemble are obtained as follows in terms of the zentropy theory,

F=∑k=1mpkUk−TS=∑k=1mpkFk+kBT∑k=1mpkln⁡pk(16)F = \sum_{k=1}^{m} p^k U^k - TS = \sum_{k=1}^{m} p^k F^k + k_B T \sum_{k=1}^{m} p^k \ln p^k \tag*{(16)}
Z=e−FkBT=∑k=1mZk=∑k=1me−FkkBT(17)Z = e^{-\frac{F}{k_B T}} = \sum_{k=1}^{m} Z^k = \sum_{k=1}^{m} e^{-\frac{F^k}{k_B T}} \tag*{(17)}
pk=ZkZ=e−FkkBTZ=e−Fk−FkBT(18)p^k = \frac{Z^k}{Z} = \frac{e^{-\frac{F^k}{k_B T}}}{Z} = e^{-\frac{F^k-F}{k_B T}} \tag*{(18)}

where UkU^k, Fk=Uk−TSkF^k = U^k - TS^k, and ZkZ^k are the internal energy, Helmholtz energy, and partition function of configuration kk, respectively, and ZZ is the partition function of the ensemble or system. It can been seen that Eq. (17) reduces to the standard Gibbs statistical mechanics when Sk=0S^k = 0 so that Fk=UkF^k = U^k, i.e., all configurations are pure quantum configurations without additional internal degrees of freedom as discussed in quantum statistical mechanics by Landau and Lifshitz [36]. The quantitative predictions of free energy and phase transition for a number of magnetic materials in terms of zentropy theory are reviewed by the present author [18, 20, 21], showing remarkable agreement with experimental observations without fitting parameters. The zentropy theory is being extended to predict the free energy and phase transition in PbTiO3_3 [37, 38], melting [39], and superconductors [40], demonstrating very promising results.

Dependence of volume on pressure

Let us consider hydrostatical work only for the purpose of the present work. Eq. (6) is thus written as follows for an equilibrium system,

dU=TdS−PdV+∑i=1cμidNi(19)dU = T dS - P dV + \sum_{i=1}^{c} \mu_i dN_i \tag*{(19)}

where VV is the volume change of the system, and −P-P is the negative pressure and the conjugate potential of VV. From Eq. (11), one obtains

(∂(−P)∂V)S,Ni,dipS=0=−(∂P∂V)S,Ni,dipS=0≥0(20)\left(\frac{\partial(-P)}{\partial V}\right)_{S,N_i,d_i p_S=0} = -\left(\frac{\partial P}{\partial V}\right)_{S,N_i,d_i p_S=0} \ge0 \tag*{(20)}
(∂V∂P)S,Ni,dipS=0≤0(21)\left(\frac{\partial V}{\partial P}\right)_{S,N_i,d_i p_S=0} \le0 \tag*{(21)}

Therefore, for a stable or metastable equilibrium system or a system under freezing-in conditions, its volume must always decrease with the increase of the pressure under constant SS and NiN_i. Otherwise, the system is unstable.

Under typical experimental conditions, temperature is controlled from the surroundings rather than entropy. It is thus more convenient to work with Helmholtz energy with the combined law written as

dF=−S dT−P dV+∑i=1cμi dNi(22)dF=-S\,dT-P\,dV+\sum_{i=1}^{c}\mu_i\,dN_i \tag*{(22)}

with one of the natural variables being potential rather than being all natural variables for the internal energy as shown in Eq. (19). Eq. (21) is then written as

(∂V∂P)T,Ni,dipS=0≤0(23)\left(\frac{\partial V}{\partial P}\right)_{T,N_i,d_i p S=0}\leq0 \tag*{(23)}

Dependence of volume on temperature and Maxwell relation

To study dependence of volume on temperature in an equilibrium system, it is more convenient to use Gibbs energy with temperature and pressure as its natural variables, i.e.,

dG=−S dT+V dP+∑i=1cμi dNi(24)dG=-S\,dT+V\,dP+\sum_{i=1}^{c}\mu_i\,dN_i \tag*{(24)}

For a closed system with dNi=0dN_i=0, one has

∂V∂P=∂2G∂P2≤0(25)\frac{\partial V}{\partial P}=\frac{\partial^2G}{\partial P^2}\leq0 \tag*{(25)}
∂S∂T=−∂2G∂T2≥0(26)\frac{\partial S}{\partial T}=-\frac{\partial^2G}{\partial T^2}\geq0 \tag*{(26)}

with the other natural variables kept constant which are omitted for the sake of simplicity of formula here and for the rest of the paper following Hillert’s convention [22]. Eq. (25) and Eq. (26) indicate that the surface of G(T,P)G(T,P) is concave as pointed out by Hillert [22].

The Maxwell relation through the 2{sup}nd derivative of Gibbs energy can be obtained as follows

∂V∂T=∂2G∂T∂P=∂S∂(−P)=−∂S∂P(27)\frac{\partial V}{\partial T}=\frac{\partial^2G}{\partial T\partial P}=\frac{\partial S}{\partial(-P)}=-\frac{\partial S}{\partial P} \tag*{(27)}

As discussed by the present author [19, 20], the left side of Eq. (27) is relatively easy to measure experimentally, while the right side is ideal for theoretically investigations and can be predicted by the zentropy theory discussed in § 3. Therefore, the Maxwell relation represents a perfect integration of experimental and theoretical approaches to the same phenomenon.

Considering that the configurations of the system are composed of ground-state and non-ground-state configurations based on DFT, the volume of the system and its derivative to temperature can be obtained as follows

V=∂G∂P=∂(−kBTln⁡Z)∂P=−kBTZ∂Z∂P=−kBTZ∂∑k=1mZk∂P=−kBTZ∑k=1m∂Zk∂P=−kBT∑k=1mZkZ∂Zk∂P=∑k=1mZkZ∂(−kBTln⁡Zk)∂P=∑k=1mZkZ∂Gk∂P=∑k=1mpkVk=Vg+∑k=1mpk(Vk−Vg)(28)\begin{aligned} V &= \frac{\partial G}{\partial P} = \frac{\partial(-k_B T\ln Z)}{\partial P} = -\frac{k_B T}{Z}\frac{\partial Z}{\partial P} = -\frac{k_B T}{Z}\frac{\partial\sum_{k=1}^{m} Z^k}{\partial P} = -\frac{k_B T}{Z}\sum_{k=1}^{m}\frac{\partial Z^k}{\partial P} \\ &= -k_B T\sum_{k=1}^{m}\frac{Z^k}{Z}\frac{\partial Z^k}{\partial P} = \sum_{k=1}^{m}\frac{Z^k}{Z}\frac{\partial(-k_B T\ln Z^k)}{\partial P} \\ &= \sum_{k=1}^{m}\frac{Z^k}{Z}\frac{\partial G^k}{\partial P} = \sum_{k=1}^{m}p^kV^k = V^g+\sum_{k=1}^{m}p^k(V^k-V^g) \tag*{(28)} \end{aligned}
∂V∂T=∂Vg∂T+∑k=1m[pk∂(Vk−Vg)∂T+∂pk∂T(Vk−Vg)](29)\frac{\partial V}{\partial T}=\frac{\partial V^g}{\partial T}+\sum_{k=1}^{m}\left[p^k\frac{\partial(V^k-V^g)}{\partial T}+\frac{\partial p^k}{\partial T}(V^k-V^g)\right] \tag*{(29)}

where VgV^g and VkV^k are the volumes of the ground-state configuration and configuration kk, respectively. Both VgV^g and VkV^k can be predicted by DFT through quasiharmonic approximation (QHA) as a function of temperature and pressure [41, 42], and they increase with the increase of temperature, i.e., ∂Vk∂T>0\frac{\partial V^k}{\partial T}>0 and ∂Vg∂T>0\frac{\partial V^g}{\partial T}>0.

It is self-evident from Eq. (28) that the only option for VV not to increase with the increase of temperature is with (Vk−Vg)<0(V^k-V^g)<0, i.e., the volumes of non-ground-state metastable configurations are smaller than that of the ground-state configuration. This can also be seen from Eq. (29) that with (Vk−Vg)<0(V^k - V^g) < 0, ∂(Vk−Vg)∂T\frac{\partial(V^k-V^g)}{\partial T} likely negative, pk>0p^k > 0, and ∂pk∂T>0\frac{\partial p^k}{\partial T} > 0 except ∂pg∂T<0\frac{\partial p^g}{\partial T} < 0 which does not affect the value of ∂V∂T\frac{\partial V}{\partial T} since (Vg−Vg)=0(V^g - V^g) = 0, ∂V∂T\frac{\partial V}{\partial T} becomes negative under the following condition

∂Vg∂T<∣∑k=1m[pk∂(Vk−Vg)∂T+∂pk∂T(Vk−Vg)]∣(30)\frac{\partial V^g}{\partial T} < \left|\sum_{k=1}^{m}\left[p^k\frac{\partial(V^k-V^g)}{\partial T}+\frac{\partial p^k}{\partial T}(V^k-V^g)\right]\right| \tag*{(30)}

Therefore, the phenomenon of negative thermal expansion is related to statistical competition of configurations with the volumes of non-ground-state configurations being smaller than that of the ground-state configuration. The experimental observed macroscopic soft vibrational modes are subjectively assigned to atomic bonding and do not reflect the microscopic individual local bonding characteristics as recently demonstrated by Wendt et al. [43] through neutron scattering investigations.

Furthermore, as discussed in § 2 and shown by Eq. (12), both VV and SS diverge with respect to their respective conjugate variables at the critical point, i.e.,

∂S∂T=+∞(31)\frac{\partial S}{\partial T}=+\infty \tag*{(31)}
∂V∂(−P)=+∞(32)\frac{\partial V}{\partial(-P)}=+\infty \tag*{(32)}

As the critical point is a zero-dimension feature in a multi-dimensional space [22, 32], i.e., the two dimensional T-P space in the present case, VV and SS also diverge with respect to temperature and pressure, respectively, though their signs are not required to be positive by any fundamental laws or stability criteria. On the other hand, Eq. (28) to Eq. (30) show that their signs are positive if (Vk−Vg)>0(V^k - V^g) > 0 such as Ce [6, 34, 35] and can be negative if (Vk−Vg)<0(V^k - V^g) < 0 such as Fe3Pt\mathrm{Fe}_3\mathrm{Pt} [6, 17], i.e., at the critical point, one may have

∂V∂T=−∂S∂P=±∞(33)\frac{\partial V}{\partial T} = -\frac{\partial S}{\partial P} = \pm\infty \tag*{(33)}

as predicted by the zentropy theory, shown in Figure 1 (PDF p. 17) in terms of U-V curves at 0 K and T-P and T-V phase diagrams, being positive divergency for Ce with (Vk−Vg)>0(V^k - V^g) > 0 and negative divergency for Fe3Pt\mathrm{Fe}_3\mathrm{Pt} with (Vk−Vg)<0(V^k - V^g) < 0, respectively.

Predicted phase diagrams for Ce and Fe₃Pt, showing panels (b), (e), and (f), with phase boundaries, experimental data, volume curves, and a miscibility gap

Figure 1 (PDF p. 17). Predicted UU-VV at 00K and TT-PP and TT-VV phase diagrams of Ce 16,35 in (a), (b), and (c), and Fe3_3Pt 16,17 in (d), (e), and (f) in terms of the zentropy approach. The critical point id denoted by the half-filled circle in (b) and the open red circle in (e) and the green circles in (c) and (f), respectively, and all other symbols are experimental data. The isobaric volume curves are also plotted in (d) and (f) as a function of temperature with the TT-PP ranges for volume anomaly

Since the critical point separates the 1{sup}st- and 2{sup}nd-order transitions, the two-phase equilibrium line in the 1{sup}st`-order transition region in the T-P space is with its slope represented by the Clausius–Clapeyron equation, i.e.,

∂P∂T=ΔSΔV(34)\frac{\partial P}{\partial T} = \frac{\Delta S}{\Delta V} \tag*{(34)}

with ΔS\Delta S and ΔV\Delta V being the entropy and volume differences of the two phases. Since both phases merge into one phase after the critical point is crossed from the 1{sup}st-order transition region, the configurations in the two phases are thus the same, and the difference between the two phases is thus the different probabilities of configurations in these two phases. The difference disappears at the critical point. A positive slope indicates that $\Delta S$ and $\Delta V$ have the same sign so the high temperature state with high entropy has larger volume than the low temperature state with low entropy (see {xref}Eq. 26), resulting in positive sign for {xref}Eq. 33 at the critical point. This is shown in {xref}Figure 1 (b) for Ce. On the other hand, a negative slope indicates that the high temperature state has smaller volume, thus negative sign for {xref}Eq. 33 at the critical point. Consequently, one can determine whether a system may possess negative thermal expansion based on the slopy of a two-phase equilibrium as surveyed in our previous work {citep}44. This is shown in {xref}Figure 1 (e)` for Fe3Pt\mathrm{Fe}_3\mathrm{Pt}, noting that the pressure is plotted in the descending order from left to right. This approach can be useful to the investigation of phase relations under high temperature and high pressure which are among core activities of Prof. Navrotsky [1, 2, 3].

Two-panel plot showing (a) calculated 0 K total energy of Ce in eV/atom for FM, AFM, and NM states, and (b) temperature as a function of pressure for γ-Ce and α-Ce

Figure 2.

Panel c: temperature–volume diagram for Ce

Figure c.

Panel d: total energy versus atomic volume

Figure d.

marked by purple open diamond symbols. Reproduced with permissions from J. Phys. Condens. Matter 21, 326003 (2009) for (a) and (b) [35], Copyright 2009 IOP Publishing, Ltd; from Liu, Z. K., Wang, Y. & Shang, S.-L. Zentropy Theory for Positive and Negative Thermal Expansion, J. Phase Equilibria Diffus. 43, 598–605 (2022) licensed under a Creative Commons license for (c) and (f) [16]; and from Philos. Mag. Lett. 90, 851–859 (2010) for (d) and (e) [17], Copyright 2010 Taylor & Francis.

Summary

In the present paper, the dependence of volume on pressure and temperature is analyzed in the framework of Hillert nonequilibrium thermodynamics through internal processes. Through virtual experiments, it is shown that the conjugate variables in the combined law of thermodynamics change in the same direction in a stable system, including volume and its conjugate potential, i.e., negative pressure. Consequently, volume must always decrease with the increase of pressure when other independent variables are kept constant. On the other hand, since volume and temperature are not conjugate variables, they can change in opposite directions, resulting in NTE in many systems. It is demonstrated that NTE can be qualitatively forecasted from potential phase diagrams and quantitatively predicted by zentropy theory with inputs solely from DFT without fitting parameters.

Acknowledgements

The author would like to thank Alexandra Navrotsky for many inspiring lectures and stimulating discussions over the years and admire her significant contributions to the scientific community in general and thermodynamics in particular. The present review article covers research outcomes supported by multiple funding agencies over many years with the most recent ones including U.S. Department of Energy (DOE) Grant No. DE-SC0023185.

References

  1. [1]Ito, E., Akaogi, M., Topor, L. & Navrotsky, A. Negative Pressure-Temperature Slopes for Reactions Formign MgSiO3 Perovskite from Calorimetry. Science 249, 1275–1278 (1990).pubmed.ncbi.nlm.nih.gov/17835541
  2. [2]Navrotsky, A. Progress and new directions in high temperature calorimetry revisited. Phys. Chem. Miner. 24, 222–241 (1997).DOI
  3. [3]Navrotsky, A. Pressure-induced structural changes cause large enhancement of photoluminescence in halide perovskites: a quantitative relationship. Natl. Sci. Rev. 8, nwab043 (2021).DOI
  4. [6]Liu, Z. K., Wang, Y. & Shang, S. Thermal Expansion Anomaly Regulated by Entropy. Sci. Rep. 4, 7043 (2014).
  5. [8]Wittenauer, J. The Invar effect: A centennial symposium: An International Symposium on the Invar Effect held on the occasion of the 100th anniversary of its discovery (The Minerals, Metals & Materials Society (TMS), 1997).
  6. [9]van Schilfgaarde, M., Abrikosov, I. A. & Johansson, B. Origin of the Invar effect in iron–nickel alloys. Nature 400, 46–49 (1999).DOI
  7. [10]Miller, W., Smith, C. W., MacKenzie, D. S. & Evans, K. E. Negative thermal expansion: a review. J. Mater. Sci. 44, 5441–5451 (2009).DOI
  8. [11]Fultz, B. Vibrational thermodynamics of materials. Prog. Mater. Sci. 55, 247–352 (2010).DOI
  9. [12]Mittal, R., Gupta, M. K. & Chaplot, S. L. Phonons and anomalous thermal expansion behaviour in crystalline solids. Prog. Mater. Sci. 92, 360–445 (2018).arxiv.org/abs/1711.07267
  10. [13]Liang, E., Sun, Q., Yuan, H., Wang, J., Zeng, G. & Gao, Q. Negative thermal expansion: Mechanisms and materials. Front. Phys. 16, 53302 (2021).DOI
  11. [14]Lohaus, S. H., Heine, M., Guzman, P., Bernal-Choban, C. M., Saunders, C. N., Shen, G., Hellman, O., Broido, D. & Fultz, B. A thermodynamic explanation of the Invar effect. Nat. Phys. 1–7 (2023). doi:10.1038/s41567-023-02142-zDOI
  12. [15]Liu, Z. K., Li, B. & Lin, H. Multiscale Entropy and Its Implications to Critical Phenomena, Emergent Behaviors, and Information. J. Phase Equilibria Diffus. 40, 508–521 (2019).
  13. [16]Liu, Z. K., Wang, Y. & Shang, S.-L. Zentropy Theory for Positive and Negative Thermal Expansion. J. Phase Equilibria Diffus. 43, 598–605 (2022).
  14. [17]Wang, Y., Shang, S. L., Zhang, H., Chen, L.-Q. & Liu, Z.-K. Thermodynamic fluctuations in magnetic states: Fe3Pt as a prototype. Philos. Mag. Lett. 90, 851–859 (2010).
  15. [18]Liu, Z. K. Quantitative Predictive Theories through Integrating Quantum, Statistical, Equilibrium, and Nonequilibrium Thermodynamics. J. Phys. Condens. Matter 36, 343003 (2024).arxiv.org/abs/2402.04143
  16. [19]Liu, Z. K. On Gibbs Equilibrium and Hillert Nonequilibrium Thermodynamics. J. Phase Equilibria Diffus. Invited, ArXiv 2402.14231 (2024).DOI
  17. [20]Liu, Z. K. Theory of cross phenomena and their coefficients beyond Onsager theorem. Mater. Res. Lett. 10, 393–439 (2022).
  18. [21]Liu, Z. K. Thermodynamics and its prediction and CALPHAD modeling: Review, state of the art, and perspectives. CALPHAD 82, 102580 (2023).
  19. [22]Hillert, M. Phase Equilibria, Phase Diagrams and Phase Transformations. (Cambridge University Press, 2007). doi:10.1017/CBO9780511812781DOI
  20. [23]Liu, Z. K. Computational thermodynamics and its applications. Acta Mater. 200, 745–792 (2020).
  21. [24]Liu, Z. K. & Wang, Y. Computational Thermodynamics of Materials. (Cambridge University Press, 2016). doi:10.1017/CBO9781139018265DOI
  22. [25]Calabrese, P. & Cardy, J. Entanglement entropy and quantum field theory. J. Stat. Mech. Theory Exp. 2004, P06002 (2004).DOI
  23. [26]Coleman, P. & Schofield, A. J. Quantum criticality. Nature 433, 226–229 (2005).pubmed.ncbi.nlm.nih.gov/15662409
  24. [27]Calabrese, P., Cardy, J. & Doyon, B. Entanglement entropy in extended quantum systems. Journal of Physics A: Mathematical and Theoretical 42, 500301 (2009).DOI
  25. [28]Eisert, J., Cramer, M. & Plenio, M. B. Colloquium : Area laws for the entanglement entropy. Rev. Mod. Phys. 82, 277–306 (2010).DOI
  26. [29]Calabrese, P., Cardy, J. & Tonni, E. Entanglement negativity in quantum field theory. Phys. Rev. Lett. 109, 130502 (2012).DOI
  27. [30]Alberton, O., Buchhold, M. & Diehl, S. Entanglement Transition in a Monitored Free-Fermion Chain: From Extended Criticality to Area Law. Phys. Rev. Lett. 126, 170602 (2021).
  28. [31]Zhao, J., Wang, Y.-C., Yan, Z., Cheng, M. & Meng, Z. Y. Scaling of Entanglement Entropy at Deconfined Quantum Criticality. Phys. Rev. Lett. 128, 010601 (2022).DOI
  29. [32]Liu, Z. K., Li, X. & Zhang, Q. M. Maximizing the number of coexisting phases near invariant critical points for giant electrocaloric and electromechanical responses in ferroelectrics. Appl. Phys. Lett. 101, 082904 (2012).
  30. [33]Gibbs, J. W. The collected works of J. Willard Gibbs: Vol. II Statistical Mechanics. (Yale University Press, Vol. II, 1948).
  31. [34]Wang, Y., Hector, L. G., Zhang, H., Shang, S. L., Chen, L. Q. & Liu, Z. K. Thermodynamics of the Ce γ–α transition: Density-functional study. Phys. Rev. B 78, 104113 (2008).DOI
  32. [35]Wang, Y., Hector Jr, L. G., Zhang, H., Shang, S. L., Chen, L. Q. & Liu, Z. K. A thermodynamic framework for a system with itinerant-electron magnetism. J. Phys. Condens. Matter 21, 326003 (2009).
  33. [36]Landau, L. D. & Lifshitz, E. M. Statistical Physics. (Pergamon Press Ltd., 1970).
  34. [37]Liu, Z. K., Shang, S.-L., Du, J. & Wang, Y. Parameter-free prediction of phase transition in PbTiO3 through combination of quantum mechanics and statistical mechanics. Scr. Mater. 232, 115480 (2023).
  35. [38]Hew, N. L. E., Shang, S.-L. & Liu, Z.-K. Predicting Phase Transitions in PbTiO3 using Zentropy. ArXiv 2402.18425 (2024).
  36. [39]Hong, Q.-J. & Liu, Z. K. A generalized approach for rapid entropy calculation of liquids and solids. ArXiv 2403.19872 (2024).arxiv.org/abs/2403.19872
  37. [40]Liu, Z. K. & Shang, S.-L. Revealing Symmetry-broken Superconducting Configurations Accepted by Physics and Chemistry of Minerals – Tribute to A. Navrotsky by Density Functional Theory. ArXiv 2404.00719 (2024).
  38. [41]Wang, Y., Liu, Z. K. & Chen, L.-Q. Thermodynamic properties of Al, Ni, NiAl, and Ni3Al from first-principles calculations. Acta Mater. 52, 2665–2671 (2004).
  39. [42]Shang, S.-L., Wang, Y., Kim, D. & Liu, Z.-K. First-principles thermodynamics from phonon and Debye model: Application to Ni and Ni3Al. Comput. Mater. Sci. 47, 1040–1048 (2010).DOI
  40. [43]Wendt, D., Bozin, E., Neuefeind, J., Page, K., Ku, W., Wang, L., Fultz, B., Tkachenko, A. V. & Zaliznyak, I. A. Entropic elasticity and negative thermal expansion in a simple cubic crystal. Sci. Adv. 5, eaay2748 (2019).DOI

Paper details

vlnc:W_ue5bmeg3
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 11

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents