WorksPhysics and Astronomy
Precision Limits and Non-Gaussian Advantage in Optical Phase Estimation under Preparation Constraints
Abstract
In optical quantum metrology, the scaling of the quantum Fisher information (QFI) with the mean photon number is a standard benchmark for relating precision to probe resources. For phase estimation, Heisenberg scaling corresponds to a quadratic growth of the QFI with the mean photon number, which Gaussian probes can approach. Interestingly, certain non-Gaussian probes can exhibit arbitrarily large QFI even at fixed mean photon number. Here, we clarify the resource requirements underlying this behavior by introducing a constraint that separates physically admissible states from inadmissible ones: an envelope on the photon-number distribution that arises naturally from the physical limitations of state-generation methods. Building on this constraint and considering pure single-mode probes, we define a resource quantity, , fixed by the preparation constraints, and derive a finite bound on the QFI whose Heisenberg scaling is attainable. We identify a genuine metrological advantage of non-Gaussian states over Gaussian probes subject to the same constraints. Finally, we illustrate these results with an optical preparation model based on a universal gate set.
Introduction
Quantum metrology exploits quantum resources to improve parameter-estimation precision beyond classical limits [1, 2]. An unknown parameter is encoded in a probe state , from which it is inferred through measurements. For a locally unbiased estimator, the variance satisfies the quantum Cramér–Rao bound (QCRB) [3, 4, 5]
Here, is the number of independent experiment repetitions and denotes the quantum Fisher information (QFI), which quantifies the response of the probe to a small variation in the unknown parameter.
Optical systems provide a prominent platform for quantum metrology [6, 7]. A paradigmatic task is the estimation of a phase shift encoded by , where is the photon-number operator. Taking the mean photon number as the resource, classical probes, described by mixtures of coherent states, satisfy , corresponding to shot-noise scaling. Nonclassical probes can surpass this bound; for instance squeezed-vacuum states exhibit at large mean photon number, achieving Heisenberg scaling [8].
While Gaussian states have been extensively studied and their QFI bounded at fixed mean photon number [8], two natural questions arise: whether non-Gaussian probes can offer greater sensitivity and what limits apply to these more general states. The first question has attracted considerable recent interest; see, for instance, [9, 10, 11]. However, the mean photon number alone imposes no finite universal bound on the QFI: non-Gaussian probes can exhibit arbitrarily large sensitivity even at fixed mean photon number [12, 13, 14]. As previously emphasized, this resource measure can obscure the resources associated with rare, highly excited components and therefore provide an incomplete account of metrological resources [15].
In this work, we propose a framework that resolves this issue by showing that the limitations of experimental setups impose a constraint on the photon-number distributions of admissible probes. This constraint reveals that states exhibiting divergent behavior are physically inaccessible. Within this framework, we introduce a counterpart of the mean photon number to quantify the required resources, which we call the root-mean-square photon budget, . This quantity incorporates the physical limitations of the setup and allows us to derive a finite bound on the QFI that recovers a Heisenberg limit in terms of this budget. We further compare Gaussian and non-Gaussian probes, showing that preparation constraints can make the latter necessary to achieve Heisenberg scaling. In particular, for families of exponentially decaying envelopes with fixed decay length, the Gaussian QFI grows at most linearly with , whereas non-Gaussian probes can attain quadratic scaling. Finally, we illustrate the framework with a setup built from a universal gate set, in which the limiting resources that determine both the envelope and the photon budget of the experiment are readily identified.
Preliminaries
We consider local phase estimation with pure single-mode optical probes, assuming lossless encoding and an ideal external phase reference whose resources are not counted [16]. We quantify sensitivity through the QFI and assume asymptotic attainability of the QCRB as the number of measurements, , grows; prior uncertainty and precision at fixed total resources are beyond this scope. An unknown phase shift is encoded into the probe as,
For this encoding, the QFI can be written in the following simple form [5]
A well-studied class of probes are Gaussian states [8, 17], which QFI is upper-bounded as,
This bound is attained for squeezed-vacuum states, i.e., they are optimal within this family. This bound defines the standard Gaussian limit (SGL), which remains finite whenever the mean photon number is finite. Therefore, when the mean photon number is the sole resource, optimal Gaussian states reach the Heisenberg limit. For Gaussian probes, fixing this first moment guarantees a finite QFI, because constraining the mean photon number bounds all higher-order moments.
Heavy-tailed states
Outside the set of Gaussian states, we can always construct probes with a finite mean photon number but a divergent second moment and, hence, a divergent QFI. The simplest such family consists of what we call heavy-tailed states,
In Appendix § 2.0.1, we show that their QFI diverges while their mean photon number remains finite.
Although these states are normalizable and hence belong to the Hilbert space, their physical realization is problematic because their energy variance diverges. Their unbounded support alone is not responsible for the divergence, as coherent states also have unbounded support but finite variance. Instead, this behavior arises from the slow algebraic decay of their photon-number distribution.
Asymmetrically superposed states
Along these lines, Refs. [11, 12] proposed probes based on asymmetric states. They superpose the vacuum with a highly excited state (with and ) to build states with large photon-number variances. To keep the mean photon number low, the excitation is weighted with a probability amplitude ,
For excitations that overlap the vacuum, the state requires an -dependent normalization, which modifies the expressions below, although the physical conclusions are not altered. These states have finite energy fluctuations whenever the excitation has a finite second moment, . Since , the QFI of this state is
Higher excitations can therefore enhance the QFI at fixed mean photon number. For instance, the Fock excitation with , along values of for which is an integer, keeps the probe mean fixed at and gives
which diverges as and surpasses the Heisenberg limit when the mean photon number is taken as the resource. Other excitations produce the same divergence with family-dependent prefactors.
The divergence in the preceding example requires increasingly large Fock excitations as . For a fixed excitation with finite second moment, the QFI instead vanishes in this limit. Its maximum over the weight occurs at
Since , the optimal weight satisfies , with for a Fock excitation (see Appendix § 2.0.2). Figure 1 illustrates analogous behavior for coherent and squeezed-vacuum excitations, with the maximum QFI attained away from . Thus, reducing the excitation weight does not indefinitely improve sensitivity when the excitation itself is fixed. The probe’s mean photon number alone does not capture this distinction, since a small weight can compensate for an increasingly energetic excitation.

Figure 1. QFI versus for , with at 21.4 dB [, zero relative phase] (blue), and for the asymmetric superposition of coherent states , with (red). The latter peaks at (displaced cat), while the former is maximal for the pure squeezed vacuum ().
Preparation constraints through photon-number envelopes
The behavior of the states analyzed in the previous sections exposes the tension inherent in using the mean photon number as the figure of merit. This ambiguity disappears once the finite resources available for state preparation are taken into account, such as finite pumping [18, 19, 20, 21, 22] or bounded squeezing [23]. In particular, the expected photon number of a state cannot exceed the number of photons the source is able to generate. Likewise, the probability of populating Fock states above the mean photon number produced by the source cannot decay more slowly than the source’s own photon-number distribution. Depending on the platform, this envelope can take the form of a hard cutoff, as in Law-Eberly-type protocols [24, 25], or of an exponential (or faster) decay, as for coherent photon sources [18, 19, 20, 21, 22] or heralding protocols [20].
To unify and model these constraints, we introduce a general treatment based on a point-wise envelope, a non-negative sequence that bounds the photon-number distribution . Notably, this approach provides a coarse description of preparation restrictions without specifying the photon source. For a given threshold , we require the envelope to satisfy for , for , and . Then, the admissible distributions are
Thus, the range forms a free window, including an unconstrained vacuum population, while a nonzero tail allows occupation above . This constraint defines the class considered here, although additional restrictions imposed by a specific device may narrow it.
In Sec. VI, we illustrate how the framework translates apparatus-level restrictions into a common constraint on the probes used for phase estimation. We consider a preparation model built from a universal optical gate set, where bounds on the available gate resources constrain the output photon-number distributions and thereby determine an envelope.
Limits on the precision
Since , Eq. (3), the second moment controls the sensitivity; accounting for both typical photon numbers and rare high-energy events. To compare probes under the same preparation constraints, we consider the largest second moment allowed by the envelope rather than the moment of a particular probe. Taking its square root gives a photon-number scale fixed by these constraints, which we define as the envelope’s root-mean-square photon budget,
Here, denotes the expectation with respect to the photon-number distribution . In Appendix C, we construct the unique maximizing distribution, which need not maximize the QFI.
For every admissible probe we derive the following upper-bound,
Thus, we obtain a Heisenberg limit in terms of the root-mean-square photon budget, fixed by the preparation constraints independently of the chosen probe. The condition ensures that this bound is finite and holds uniformly over all admissible probes. In particular, rare high-photon-number components cannot produce unbounded sensitivity for a fixed envelope budget.
The quadratic scaling with is attainable up to a constant factor by states whose photon-number distributions belong to . Denoting by the distribution that maximizes Eq. (11), we construct the pure probe
This state is admissible for arbitrary phases and satisfies
where the inequality follows from .
To define scaling, consider a specified family of envelopes , where is a tunable parameter of the preparation apparatus, for example, at fixed tail shape and decay parameters. For each , we select an admissible probe and keep both the envelope and the state fixed throughout the repetitions. Scaling compares these experiments as increases.
For a hard cutoff, for , the RMS budget reduces to , and Eq. (12) yields . A sharper bound follows from the bounded photon-number support. By Popoviciu’s inequality [26], , hence . This bound is attained for the balanced superposition [14].
We now return to the state families of Sec. II. The envelope constraint excludes heavy-tailed probes with divergent second moments, since we require . For the asymmetrically superposed states, fixing a common envelope makes independent of the vacuum weight, even though the probe’s actual photon-number moments vary with . Increasing the excitation while keeping the probe’s mean photon number fixed cannot produce a divergent QFI under this envelope. Indeed,
so the QFI in Eq. (7) remains bounded. Thus, the fixed-mean divergence discussed in Sec. II requires an unbounded increase in , revealing a growing resource requirement that the mean photon number alone does not capture.
Non-Gaussian advantage
We now use this framework to characterize non-Gaussian advantage. Within a fixed envelope, every pure Gaussian state satisfies , where is attained by the distribution that maximizes the RMS photon budget (see Appendix C). Since is increasing for , Eq. (4) yields
Note that is an auxiliary quantity fixed by the envelope, not an additional resource. Combining Eqs. (14) and (16), we find
Since the right-hand side depends only on the envelope , this inequality provides a sufficient criterion for non-Gaussian advantage directly from the envelope constraint. Whenever it exceeds one, the probe of Eq. (13), which attains optimal scaling, outperforms every admissible Gaussian state. Along a family with increasing , the condition prevents Gaussian probes from achieving Heisenberg scaling in the resource, while retains it. Physically, the envelope allows large second moments without a comparable increase in the first moment, which limits Gaussian sensitivity.
As an example, consider the algebraically decaying envelope for ,
with fixed , so that the envelope has a finite second moment . Increasing enlarges the free window while preserving the envelope profile as a function of . Both and grow proportionally to , as we show in Appendix D, and for sufficiently large the right-hand side of Eq. (17) satisfies
This limit exceeds one for , certifying that outperforms every admissible Gaussian probe for sufficiently large . Thus, Eq. (17) establishes a constant-factor advantage at fixed tail exponent, although it does not yield a scaling separation in .
A second criterion can be derived when the envelope decays at least exponentially at large photon numbers. We define its asymptotic exponential rate and corresponding tail length by
with . The condition means that an exponential upper bound holds sufficiently far in the envelope tail. Algebraic tails, and subexponential tails more generally, have and are not covered by this second condition.
For any admissible Gaussian probe, the squeezing parameter satisfies , see Appendix E, independently of displacement. The envelope thus limits squeezing even when it allows to grow. As we further show in Appendix E, this restriction yields an upper bound on the QFI of Gaussian states in terms of and ,
In this bound, the first term comes from squeezing. It depends only on how fast the tail of the envelope decays, and not on . The second term comes from displacement and grows linearly with . Thus, increasing the budget at fixed tail decay, for example by enlarging the free window, allows at most linear growth of the Gaussian QFI with .
Combining this with Eq. (14) gives
Thus, at bounded , the QFI of Gaussian probes is limited to , whereas achieves . More generally, excludes Gaussian Heisenberg scaling. The advantage arises because the envelope permits increasing photon-number fluctuations while restricting Gaussian squeezing. To illustrate the distinction between the two criteria, consider the exponentially decaying envelope for ,
As we show in Appendix § 2.13, the distribution gives: , . As , the right-hand side of Eq. (17) approaches and therefore does not certify an advantage. Instead, computing and , Eq. (22) certifies an advantage growing at least linearly with . Indeed, as we detail in Appendix § 2.13, the best admissible Gaussian probe has , whereas . The distinction between the two criteria arises because Eq. (17) does not capture the envelope’s restriction on squeezing.
Both bounds, Eqs. (17) and (22), compare probes under the same envelope and provide sufficient conditions for non-Gaussian advantage. A lower bound of at most one therefore does not rule out an advantage. These results show that preparation constraints can impose a fundamental separation between Gaussian and non-Gaussian metrology. In particular, at fixed exponential tail decay, Gaussian probes are limited to shot-noise-like scaling in , while admissible non-Gaussian probes attain Heisenberg scaling under the same constraints.
Example: Universal optical gate set
We now apply the previous results to a concrete preparation model using the universal gate set of displacements, squeezing, rotations, and Kerr gates [27, 28] (see Appendix G for the proofs of the section). Circuit resources are quantified by the total squeezing and displacement , which determine the envelope for Gaussian circuits. Rotations and Kerr gates preserve photon-number probabilities but alter phases relevant to subsequent squeezing and displacement. We show that the same envelope remains valid when these gates are interleaved in circuits without squeezing. For general circuits, we assume this property based on a heuristic argument in Appendix G. Table I includes only cases for which we show that the envelope remains valid.
Firstly, we compute the decay rate of the tail fixed by the resources, so that, for all , the admissible probes satisfy:
where . The rate must be strictly smaller than , and it is found by minimizing . The threshold, in contrast, depends explicitly
on both the total displacement and squeezing applied. Requiring Eq. (24) for every probe gives:
Evaluating Eq. (11) for this envelope, we obtain the root-mean-square photon budget:
Hence, the resources that the setup can supply, and , bound the achievable QFI through . Table I compares representative admissible probes at equal . The non-Gaussian probes scale quadratically, whereas the prefactor of the squeezed vacuum, , decreases with both the tolerance and the squeezing.
| Probe | State | |
| Squeezed vacuum | ||
| Displaced cat | ||
| ON |
Table 1. Quantum Fisher information of representative admissible probes. The comparison is therefore at equal resource . All rows use at fixed tolerance , and $\simeq denotes asymptotic equivalence along each path. refers to the quantity of probability density above .
Discussion
In this work, we incorporated preparation constraints into local optical phase estimation through upper envelopes on the probe’s photon-number probabilities. We defined a finite root-mean-square photon budget fixed by these constraints and derived a Heisenberg limit in this budget whose scaling is attainable. Divergent QFI at fixed mean photon number therefore requires an unbounded preparation budget. We also established sufficient conditions for non-Gaussian probes to outperform every admissible Gaussian state under the same envelope. In particular, for exponentially decaying envelopes with fixed decay length, Gaussian QFI grows at most linearly with the budget, whereas admissible non-Gaussian probes can attain quadratic scaling. Preparation constraints can thus make non-Gaussianity necessary to achieve Heisenberg scaling.
Using an optical preparation model, we illustrated how experimentally relevant resources can be translated into photon-number envelopes. This connects our framework to the capabilities of optical setups and provides sensitivity benchmarks in terms of available preparation resources. A natural next step is to identify preparation and measurement protocols that realize the predicted advantage in concrete devices and assess its robustness to photon loss.
Acknowledgments
The authors thank Martí Perarnau-Llobet, John Calsamiglia and Ricard Ravell Rodríguez for fruitful discussions, advice and feedback on the manuscript. This research was supported by the ATRAE Program (Grant ATR2024154621), funded by MI-CIU/AEI/10.13039/501100011033.
The authors acknowledge the use of generative AI tools (Claude and ChatGPT) for the purposes of literature search, language editing of the manuscript and assistance in deriving equations. All AI-assisted content was reviewed, verified, and revised by the authors, who take full responsibility for the content of this work.
References
On the heavy-tailed states
In this appendix, we show how to construct heavy-tailed probes with infinite QFI even at a finite mean photon number. To this end, we require a divergent photon-number variance while preserving a finite mean photon number. First, we impose a finite mean photon number,
The series converges only if , which here requires , that is, . Second, we require a divergent photon-number variance,
which diverges for , that is, . Hence, the expansion in Eq. (5) with exponent yields a finite mean photon number and a divergent QFI.
On the details of asymmetrically superposed states
In this appendix, we study how the weight parameter in Eq. (6) affects the QFI for a given excitation . Since the QFI in Eq. (7) is concave in , setting its derivative with respect to to zero gives the maximum at
If (excitations with broad number distributions), the optimal value is and the superposition reduces to . Whenever , exact for , the optimum lies at , the balanced superposition. Since , we have for every excitation, so the optimum never lies in the regime that appears when is taken as the resource.
On the distribution attaining the RMS photon budget
In this appendix, we construct the distribution attaining the maximum in the RMS photon budget , defined in Eq. (11). We also show that the same distribution maximizes the mean photon number. For simplicity, we use the notation, writing the envelope constraints as for and leaving the vacuum population unconstrained. An arbitrary free window is included by setting for , so the argument remains general. Throughout, we assume . First, consider the case . Take the distribution as
This distribution is normalized and admissible. For any and ,
Thus, maximizes both the first and second moments, with and . Equality requires for every , while normalization fixes . Now consider . Choose an integer satisfying
To show that such an exists, define the tail mass . It is non-increasing in , it starts at , and as since . Hence, the set is non-empty and bounded, and its largest element satisfies the previous inequality, i.e., . Next, take the distribution as
The distribution fills the envelope above and places the remaining probability at . It is normalized and admissible, since Eq. (32) ensures . For any , normalization gives . Hence, for ,
Both sums are non-negative. Therefore, again maximizes both moments, giving
Equality in Eq. (34) requires for and for ; normalization then fixes . Thus, in either case, only attains equality.
On the algebraically decaying envelope example
In this appendix, we detail the computations for the algebraically decaying envelope example in § 2.3. We derive the asymptotic behavior of and for the envelope of Eq. (18) and obtain the limit in Eq. (19). Throughout, is fixed and denotes terms that vanish as . Note that for we have , so the condition holds precisely because .
We first identify the distribution attaining both and . Since and the tail of the envelope is strictly positive, , so is given by Eq. (33), with the largest integer satisfying . The last level of the free window carries ; hence,
and therefore . Thus, every level belongs to the algebraic tail, where , and also , including at , where both sides equal one.
From Eqs. (35) and (36), we can write and in terms of and the tail sums
Indeed, splitting , both moments read
To estimate the tail sums, note that for the function is decreasing, so that . Summing over and using , we obtain
The two bounds differ by the factor , which approaches one since . Hence,
Next, we determine how grows with . Since and , Eq. (32) reads
Combining with the lower bound in Eq. (40) for gives , that is,
Thus, and . Then, Eq. (42) yields . Moreover, the integral bounds on and give , which sharpens the asymptotic corrections. Eq. (41) with then fixes ,
Writing and inserting the first line of Eq. (44) into Eq. (41), we find
We can now evaluate and . By Eq. (42), , so the terms and in Eq. (39) give relative corrections of order compared with and . Therefore,
and, using Eq. (44), we see that both quantities scale as for ,
This growth, faster than , reflects that leaves the whole free window empty and places its weight deep in the tail, since . Since for , we have , so and .
Inserting Eq. (46) into the right-hand side of Eq. (17), the factors cancel and
which is Eq. (19) for . This limit exceeds one when . Writing , so that , the condition becomes , i.e., . Hence, Eq. (17) certifies a non-Gaussian advantage for and sufficiently large .
On the bound on the QFI for Gaussian states in terms of tail decay
In this appendix, we show that every admissible pure Gaussian probe satisfies , and we derive the Gaussian bound in Eq. (21). Throughout, .
Up to a global phase, every pure Gaussian state can be written as with and [8, 29]. A phase rotation leaves the photon-number distribution unchanged and only shifts the phases of and , so we may take real. We write , , and , and split the displacement along the anti-squeezed and squeezed quadratures, with and (for real , squeezes the real quadrature, as in Eq. (75)). The photon-number mean and variance are then [8, 29]
To compare the photon-number distribution with the envelope, we use its photon-number generating function,
This is a power series whose coefficients are the photon-number probabilities. It satisfies , and its derivatives at give the factorial moments of . Here, we only need its radius of convergence , which by the Cauchy–Hadamard formula satisfies . The radius of convergence therefore measures how fast decays at large photon numbers, in the same way as in Eq. (20) measures the decay of the envelope. Comparing with thus compares the tail of a Gaussian distribution with the tail allowed by the envelope. For a pure Gaussian state, is known in closed form [30, 31],
where the series converges for .
We first determine the radius of convergence of . Suppose first that . For , both terms in the exponent of Eq. (51) are non-negative; hence,
The right-hand side diverges as approaches from below. Thus, the series converges below but not at , so its radius of convergence is exactly , and the Cauchy–Hadamard formula gives
i.e., the photon-number distribution of a pure Gaussian state decays at the exponential rate , in agreement with in Eq. (24). An admissible probe satisfies for ; hence, . Taking the limit superior and using Eq. (20),
which also holds trivially for . This restriction holds independently of the displacement and of , since it only involves the asymptotic decay of the envelope.
Next, we derive an upper bound on the QFI of Gaussian states in terms of the tail decay. The functions and are increasing on , and , . Hence,
Moreover, since the photon-number distribution of is admissible, Eq. (49) gives . Inserting these bounds into the QFI for phase estimation, Eq. (3), and using , we obtain
The first term is the squeezing contribution and the second is the displacement contribution. Finally, we express these constants through the tail length. Writing and using the elementary inequalities and ,
Inserting the bounds in Eq. (E9) into Eq. (56) and using , which holds because attains both budgets and , we obtain
which is Eq. (21).
On the exponentially decaying envelope example
In this appendix, we detail the computations for the exponentially decaying envelope example in § 2.3, Eq. (23). In particular, we compute both and , evaluate both criteria, Eqs. (17) and (22), and show that the best admissible Gaussian probe has a QFI linear in .
We first identify the distribution attaining both and . Since and the tail of the envelope is strictly positive, , so is given by Eq. (33), with the largest integer satisfying . The tail masses just above the free window are
hence, . The remaining probability placed at is , so fills the envelope exactly above ,
The free window, including the vacuum, is left unoccupied, and all the probability lies in the tail.
To evaluate the moments of , we use the geometric sums , , and , obtained by differentiating the first one. At , they give
Expanding for and using Eq. (62),
Since , the RMS budget and the threshold differ only by a constant,
Moreover, Eq. (14) gives the QFI of the probe exactly,
Next, we evaluate the mean-based criterion. Inserting Eq. (63) into the right-hand side of Eq. (17), we obtain
where the inequality holds for every , and the left-hand side tends to as . Thus, Eq. (17) never certifies an advantage for this envelope: the mean of grows as fast as its RMS value, so the mean-based Gaussian bound, Eq. (16), also grows quadratically.
We now turn to the tail-decay-based criterion, Eq. (22). For , , which converges to as . Hence, the limit superior in Eq. (20) is a limit, and
independently of . Inserting these values into Eqs. (21) and (22), we obtain
The right-hand side of Eq. (69) grows linearly with . Numerically, the denominator is , so the ratio exceeds one for , which Eq. (64) guarantees for .
Finally, we show that the Gaussian bound in Eq. (68) is attained up to constants, so that the separation is genuinely one of scaling. Consider a coherent state with , whose photon-number distribution is . The levels lie in the free window and impose no condition. For , maximizing over (the maximum lies at ) and using Stirling’s lower bound, , we obtain
For the tail levels, the ratio of consecutive populations is for , since . Combining this with Eq. (70) at , we find, for every ,
so the state is admissible. Its QFI is , and taking gives by Eq. (64). Together with Eq. (68), the best admissible Gaussian probe, , satisfies
that is, , whereas Eqs. (64) and (65) give . Enlarging the free window increases the RMS budget, but the fixed tail decay keeps , so admissible Gaussian probes can only profit from it through displacement, which yields a QFI linear in the resource.
On the details of the example
In this appendix, we derive the results of the example in Sec. VI. First, we compute the tail decay rate imposed by the setup. Second, we find the threshold that bounds the effective space in which the accessible states are defined. Next, we establish the relation between and for this setup. Finally, we derive the scaling of the quantum Fisher information with for different classes of states.
Shape of the envelope
To find the decay of the photon-number distribution generated by the universal gate set , we first compute the moment-generating function of the state,
For a decay , converges only for . Since every term of the sum is positive, each term is bounded by the whole sum, . Defining , we can rewrite this bound as
which holds for every and every at which is finite. The supremum of such gives the asymptotic decay rate of . For a squeezed state, the coefficients are
The moment-generating function then reads
This series converges only if , which fixes the supremum of the decay rate. The displacement multiplies the coefficients by a Hermite-polynomial factor [30] that grows more slowly than any exponential. This factor leaves the radius of convergence of , and hence , unchanged [Eq. (E5)]. When the displacement has a component $d_+ > 0$ along the anti-squeezed quadrature, however, the generating function in Eq. (E3) diverges as $\exp[d_+(1-\beta)^2/\beta(1-\beta z)]$ for $z \to 1/\beta$. A bound $q_n \le C e^{-\kappa n}$ for all large $n$ would instead allow at most a simple pole, $G(z) \le \sum_{n\le N}q_nz^n+C(\beta z)^{N+1}/(1-\beta z)$. Consequently, no such bound with finite $C$ holds, and the decay rate of the envelope must satisfy $0 < s < \kappa$ strictly. For any such $s$, $M(s)$ is finite and, for a displaced squeezed state, follows in closed form from {xref}Eq. (E3)` at .
We therefore fix and define for . Requiring that the probability weight above equal a tolerance gives
Every probe then satisfies for , provided that .
Threshold
For Gaussian circuits, the threshold depends only on the displacement and squeezing gates. Each squeezing gate stretches phase-space distances by at most , and rotations preserve them. The final squeezing therefore satisfies , and each displacement is amplified by at most , so that the final displacement satisfies . Since Eq. (51) increases with the squeezing and with the anti-squeezed displacement, the worst case is the aligned state.
Rotations and Kerr gates leave the photon-number distribution unchanged when they act, but they modify the phases on which subsequent squeezing and displacement operate, and hence the final distribution. For circuits with Kerr gates, we assume that this interleaving does not enlarge the envelope beyond that of the aligned Gaussian state with the same totals. A phase-space argument supports this assumption: Kerr gates preserve the angle-averaged Wigner function, squeezing enlarges phase-space distances by at most , and displacements shift them by at most . This argument is heuristic, because Kerr gates generate Wigner negativity, and tail probabilities of quasiprobability distributions are not monotone under phase-space maps. For circuits without squeezing, the assumption holds. Number-diagonal gates preserve the factorial moments , and gives . By induction from the vacuum, , and expanding in factorial moments gives, for ,
the generating function of the coherent state . Since this coherent state belongs to the Gaussian class, these circuits satisfy the same envelope.
For the purpose of computing , we can then describe the state-generation protocol as , with
In the anti-squeezed quadrature , this state has mean and variance , whereas the orthogonal quadrature has variance . For strong anti-squeezing, , this quadrature dominates the photon number, , and the tail probability is approximately
The second term never exceeds the first. Using for and setting the tail probability equal to , the argument of the first term satisfies . To leading order in , this gives
This quantile bounds only the total tail weight, not each level, and therefore does not guarantee Eq. (24). The certified threshold, Eq. (25), imposes the condition of Sec. G 1 with given by Eq. (51) for the aligned state at ,
Since diverges both as and as , it attains a minimum at some . For large displacement, the resulting threshold remains close to Eq. (81).
Relation between NRMS and Nmax
To find , we maximize under the envelope constraint using Appendix C. The tail masses are and , so the pivot is . The maximizing distribution therefore fills the tail completely, with total weight , and places the remaining probability at . Writing in the tail, with , the excess follows the normalized geometric law , whose first two moments are
The RMS photon budget then reads
Scaling of the representative probes
First, we compute the scaling of the ON state. This state has no probability weight above , so its variance and QFI scale with as
Since along this path, this gives . We use this state only as a benchmark and do not analyze its preparation within .
Similarly, consider the displaced cat state , with , whose normalization includes the overlap . Its first two moments are
so that
For , its photon-number probabilities are , where are those of the coherent state . The cat state therefore satisfies the envelope whenever does. Taking , the coherent state belongs to the Gaussian class, and Eq. (25) gives, for large displacement, for . Hence , which reduces to when the setup supplies no squeezing.
Finally, the QFI of the squeezed vacuum is . Along the path with increasing , approaches , and Eq. (25) gives , up to corrections logarithmic in . Hence , and
For and , the exact minimization gives .
References
- [1]V. Giovannetti, S. Lloyd, and L. Maccone, Nat. Photonics 5, 222 (2011).
- [2]C. L. Degen, F. Reinhard, and P. Cappellaro, Rev. Mod. Phys. 89, 035002 (2017).
- [3]C. R. Rao, Bull. Calcutta Math. Soc. 37, 81 (1945).
- [4]H. Cramér, Mathematical Methods of Statistics (Princeton University Press, Princeton, NJ, 1946).
- [5]S. L. Braunstein and C. M. Caves, Phys. Rev. Lett. 72, 3439 (1994).
- [6]R. Demkowicz-Dobrzański, M. Jarzyna, and J. Kołodyński, in Progress in Optics, Vol. 60, edited by E. Wolf (Elsevier, Amsterdam, 2015) pp. 345–435.
- [7]M. Fadel, N. Roux, and M. Gessner, Rep. Prog. Phys. 88, 106001 (2025).
- [8]A. Manson, Phys. Rev. A 73, 033821 (2006).
- [9]J. Guo, S. Liu, B. Jing, Q. He, and M. Gessner, Metrological sensitivity beyond Gaussian limits with cubic phase states (2025), arXiv:2512.03769 [quant-ph].arxiv.org/abs/2512.03769
- [10]R. Gordillo-Hachuel, E. Torrentequi, C. de Dios, and R. Puebla, Quantum metrological advantage of high-order squeezed states (2026), arXiv:2604.09958 [quant-ph].
- [11]K. Park, T. Krisnanda, Y. Gao, and R. Filip, Quantum phase estimation beyond the Gaussian limit (2025), arXiv:2508.13046 [quant-ph].arxiv.org/abs/2508.13046
- [12]Á. Rivas and A. Luis, New J. Phys. 14, 093052 (2012).
- [13]A. Luis, Physical Review A 95, 10.1103/phys-reva.95.032113 (2017).
- [14]C. Lee, C. Oh, H. Jeong, C. Rockstuhl, and S.-Y. Lee, J. Phys. Commun. 3, 115008 (2019).
- [15]D. Branford and J. Rubio, New J. Phys. 23, 123041 (2021).
- [16]M. Jarzyna and R. Demkowicz-Dobrzański, Phys. Rev. A 85, 011801(R) (2012).
- [17]C. M. Caves, Phys. Rev. D 23, 1693 (1981).
- [18]C. Gerry and P. Knight, Introductory Quantum Optics (Cambridge University Press, Cambridge, 2004).
- [19]M. O. Scully and M. S. Zubairy, Quantum Optics (Cambridge University Press, Cambridge, 1997).
- [20]G. Harder, T. J. Bartley, A. E. Lita, S. W. Nam, T. Gerrits, and C. Silberhorn, Phys. Rev. Lett. 116, 143601 (2016).
- [21]K. Chihni and N. Quesada, Phys. Rev. A 110, 013712 (2024).
- [22]D. F. Walls and R. Barakat, Phys. Rev. A 1, 446 (1970).
- [23]H. Vahlbruch, M. Mehmet, K. Danzmann, and R. Schnabel, Phys. Rev. Lett. 117, 110801 (2016).
- [24]C. K. Law and J. H. Eberly, Phys. Rev. Lett. 76, 1055 (1996).
- [25]M. Hofheinz, H. Wang, M. Ansmann, R. C. Bialczak, E. Lucero, M. Neeley, A. D. O’Connell, D. Sank, J. Wenner, J. M. Martinis, and A. N. Cleland, Nature 459, 546 (2009).
- [26]T. Popoviciu, Mathematica (Cluj) 9, 129 (1935).
- [27]S. Lloyd and S. L. Braunstein, Phys. Rev. Lett. 82, 1784 (1999).
- [28]R.-W. Wu, T.-J. Tarn, and C.-W. Li, Phys. Rev. A 73, 012719 (2006).
- [29]O. Pinel, P. Jian, N. Treps, C. Fabre, and D. Braun, Phys. Rev. A 88, 040102(R) (2013).
- [30]P. Marian and T. A. Marian, Phys. Rev. A 47, 4474 (1993).
- [31]E. Fitzke, F. Niederschuh, and T. Walther, APL Photonics 8, 026106 (2023).