betaFeedback

WorksPhysics and Astronomy

Discretising 2D Fermionic CFTs

Abstract

We extend the exact fixed-point tensor construction of Cheng et al. to fermionic minimal models, providing an analytic construction of fixed-point tensors for fermionic rational conformal field theories. The fermionic fixed-point tensor is defined as a correlation function of boundary-changing operators on a triangle, with careful treatment of fermionic parity and spin structure. Boundary tensors are also constructed and combined with triangle tensors to form strips, enabling the extraction of scaling dimensions for boundary-changing operators. The construction incorporates modified weights for shrinkable boundary conditions, systematic depiction of spin structures, recovering both the Neveu-Schwarz and Ramond sectors. As a benchmark, our tensor with a minimal truncation of descendant levels yields convergence to the exact bulk scaling dimensions of many low energy states for the free Majorana fermion (c=1/2c=1/2), demonstrating the efficiency of approximate fixed point tensors from boundary changing operators. We also make use of a more general description of fermionic CFTs based on fermionisation of rational bosonic CFTs, and make a generic prescription for discretisation making use of their connections to modular tensor categories. We show that the discretised spin structures on a spin surface naturally recover the signs needed to recover the R/NS sectors. We propose that the collection of OPE coefficients of the discretised 2d CFT can be naturally interpreted as a state-sum of spin-TQFTs, analogous to the bosonic case. This work provides analytically computed starting points for tensor network simulations of fermionic critical phenomena.

Introduction

Understanding strongly interacting field theory is one of the most daunting and fundamental challenges of theoretical physics. One difficulty is that away from perturbative regimes we do not have a clear definition of the quantum measure of the fields in the path integral. The difficulty of identifying a quantum measure is not merely a formal mathematical nicety; it obstructs the formulation of any concrete computational strategy, even in principle. There are many powerful numerical methods that can deal with strongly interacting systems, such as the tensor network method, particularly in low dimensions. But they can only be applied if the problem has a natural discrete description—for instance, in lattice models. To utilize these methodologies in interacting quantum field theory, it is natural to ask how an apparently continuous field theory could acquire a discrete formulation.

A key step was taken in [1, 2, 3, 4], where it was realized that, at least for two-dimensional bosonic rational conformal field theories, one can rigorously discretize a path integral by leveraging the idea of cutting and gluing to decompose the path integral over a two-dimensional Riemann surface into open pairs of pants (triangular patches). These are conformally related to three-point correlation functions of boundary-changing operators (BCOs) on the real line bounding the upper half-plane. The real line is colored by conformal boundary conditions except at the points of insertion of the BCOs. The resulting manifold contains holes bounded by conformal boundary conditions. Then one removes the holes in the manifold by a weighted sum over conformal boundary conditions—these linear combinations of conformal boundary conditions are called “entanglement brane boundary conditions” [2] and were later called either “cloaking boundaries” [3] or “shrinkable boundaries” [1, 4].

Such a decomposition of continuous path integrals is essentially a tensor-network representation of the path integral. It was shown that such a tensor network satisfies the required properties of a “Fixed-Point Tensor” (FP tensor) under tensor-network renormalization (TNR) algorithms [5, 6, 7, 8]. The topological holographic principle underlies this success [9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22]. The discretization makes use of the non-invertible symmetries of the CFT and encodes a three-dimensional Turaev–Viro TQFT that imposes the appropriate symmetries. The FP tensor construction was extended to free boson CFTs beyond rational points [23] and inspired a symmetry-preserving TNR framework that stabilizes critical flows under suitable categorical constraints and accurately extracts conformal data [24, 25]. In a complementary development, this discretization approach also bridges the two-dimensional Liouville CFT and a path integral over three-dimensional hyperbolic geometries, making a clear and concrete connection between the topological holographic principle and the AdS/CFT correspondence, at least in low dimensions [26, 27].

It is natural and important to generalize this program to include fermionic CFTs—for unitary relativistic theories, this amounts to studying spin CFTs in two dimensions, which will be the main focus of this paper. In a fermionic CFT, one can assign different spin structures on a non-contractible cycle, which produces different Hilbert spaces in the Neveu-Schwarz (NS) and Ramond (R) sectors, respectively. Each Hilbert space admits a Z2Z_2 grading by fermion parity. Therefore, our discretization program should include prescriptions for encoding these different spin structures—the explicit implementation of these prescriptions in the BCO tensor contraction is a central part of this paper.

To be concrete, in this paper we generalize the exact FP tensor construction to the free Majorana fermion (c=1/2c = 1/2), the simplest fermionic CFT, which is part of the fermionic A-type minimal model family. Our work proceeds along five main axes. First, we define the fermionic FP tensor as a correlation function of boundary-changing operators on a triangle, with careful treatment of fermionic parity. Second, we verify that the fermionic FP tensor satisfies the appropriate coarse-graining conditions, thereby establishing its algebraic consistency. Third, we consider the path integral on a cylinder and propose a prescription for encoding the NS or R spin structure along the non-contractible cycle. Fourth, we extend the construction to boundary tensors and open-string spectra, and give the partition functions a topological interpretation via a strange correlator. Last but not least, we give a general prescription to discretising general fermionic CFTs via their connections to bosonic CFTs through fermionisation. This produces as a by-product a state-sum of a spin-TQFTs in 3 dimensions related to a bosonic one by proliferation of defects. To test our proposal, we compute the resultant spectrum of the CFT from the cylinder with different spin structures. In a practical computation, we have to truncate the infinite bond dimension by keeping only a finite number of descendants in each Virasoro family, and compute the low-lying bulk conformal dimensions via the transfer matrix on a cylinder. For the free Majorana fermion, our results converge to the exact values (Δ=0,1/2,1,3/2,2\Delta= 0, 1/2, 1, 3/2, 2 in the NS sector) using only a minimal number of descendant levels, demonstrating the efficiency of the BCO basis. The construction generalizes naturally to all fermionic A-series minimal models; the details of this generalization are given in Section 5 and Appendix A.2.1.

The paper is organised as follows. Section 2 reviews the bosonic discretisation. Section 3 develops the free-Majorana boundary data and fixed-point tensors, and tests the truncated cylinder spectrum. Section 4 constructs boundary tensors and studies open-string propagation on a strip. Section 5 then gives the general TQFT construction, explains how the Nakayama data encode the spin structure of an open-string closure, and discusses a candidate three-dimensional bulk interpretation. We conclude in Section 6. Appendix A collects the algebraic conventions, the detailed A-series boundary and BCO solutions, the discrete spin moves and disk calculations, and the three-dimensional interpretation of boundary tensors.

Discretizing Bosonic CFTs: A Review

As outlined in the Introduction (§ 1), the discretization of a bosonic rational CFT proceeds by cutting the path integral into triangular patches bounded by conformal boundary segments and by removing the resulting holes through weighted sums over boundary conditions. In this section we review this construction in detail, following [1, 2, 3, 4]; it forms the bosonic template that we generalize to fermionic CFTs in the remainder of the paper.

Tensor Structure in Bosonic RCFTs

The bosonic FP tensor [1] is a rank-nine object written as T(i,I)(j,J)(k,K)abc\mathcal{T}^{abc}_{(i,I)(j,J)(k,K)}. Its superscripts a,b,ca,b,c label the conformal boundary conditions of the RCFT, while the subscripts i,j,ki,j,k denote the primary boundary-changing operators (BCOs) living on the segments abab, bcbc, and caca, respectively. Within each primary family, I,J,KI,J,K index the descendant fields. The indices a,b,ca,b,c and i,j,ki,j,k range over a finite set characteristic of the RCFT, whereas I,J,KI,J,K inhabit an infinite-dimensional space, so the exact FP tensor has unbounded bond dimension.

The FP tensor is built in two steps. First, one prepares states on a semicircle by placing a BCO at the origin. Under the conformal map f(z)f(z), the semicircle is mapped to a bow-shaped segment (Figure 1a), yielding a state ∣ϕiab⟩|\phi^{ab}_i\rangle along the vertical edge. These states are made orthonormal by demanding that the two-point function on a nut-shaped region (Figure 1b) remains diagonal.

Conformal mapping of a semicircle to a bow-shaped segment and gluing two segments into a nut-shaped region

Figure 1. (a) The semicircle is mapped to a bow-shaped segment through the conformal map f(z)f(z). (b) The nut-shaped region obtained by gluing two segments along the vertical edge.

In the second step, the FP tensor is defined via the CFT path integral on an open triangle with rounded corners that carry boundary conditions a,b,ca,b,c (Figure 2a). Each edge of the triangle hosts one of the states ∣ϕiab⟩|\phi^{ab}_i\rangle, ∣ϕjbc⟩|\phi^{bc}_j\rangle, ∣ϕkca⟩|\phi^{ca}_k\rangle prepared previously.

Figure 2. (a) The shape of the tensor. (b) The amplitude of three open states can be calculated by attaching three segment regions along the open boundaries of the triangle.

This path integral can be recast as a three-point correlation function. The maps f1,f2,f3f_1,f_2,f_3

are obtained by translating and rotating f(z)f(z) to match the orientation of each edge (Figure 2b); each fif_i sends a semicircle to a bow-shaped domain. An additional map g(ξ)g(\xi) takes the region of Figure 3 to the upper half-plane (UHP):

Conformal transformation mapping a region to the upper half-plane

Figure 3. The conformal transformation gg maps the region to the upper half-plane.

g(ξ)=(−iξ+(1+i)ξ−(1+i))43.(1)g(\xi)=\left(-i\frac{\xi+(1+i)}{\xi-(1+i)}\right)^{\frac{4}{3}}. \tag*{(1)}

Composing these maps, χi=g∘fi\chi_i=g\circ f_i pushes the operators onto the UHP, producing χ1∗O(i,I)ab(x1)\chi_{1*}O^{ab}_{(i,I)}(x_1), χ2∗O(j,J)bc(x2)\chi_{2*}O^{bc}_{(j,J)}(x_2), and χ3∗O(k,K)ca(x3)\chi_{3*}O^{ca}_{(k,K)}(x_3). Consequently, the FP tensor equals the three-point correlator of these pushed-forward operators on the UHP:

T(i,I)(j,J)(k,K)abc=⟨χ1∗O(i,I)ab(x1)χ2∗O(j,J)bc(x2)χ3∗O(k,K)ca(x3)⟩UHP.(2)\mathcal{T}^{abc}_{(i,I)(j,J)(k,K)}=\left\langle\chi_{1*}O^{ab}_{(i,I)}(x_1)\chi_{2*}O^{bc}_{(j,J)}(x_2)\chi_{3*}O^{ca}_{(k,K)}(x_3)\right\rangle_{\mathrm{UHP}}. \tag*{(2)}

This quantity decomposes into a structure constant CijkabcC^{abc}_{ijk} multiplied by a three-point conformal block αIJKijk\alpha^{ijk}_{IJK}:

T(i,I)(j,J)(k,K)abc=αIJKijkCijkabc.(3)\mathcal{T}^{abc}_{(i,I)(j,J)(k,K)}=\alpha^{ijk}_{IJK}C^{abc}_{ijk}. \tag*{(3)}

The structure constants incorporate the fusion rules and the dependence on boundary conditions, whereas the conformal blocks encode the descendant level information and the triangle geometry.

Fixed-Point Conditions and Shrinkable Boundaries

For a tensor to qualify as a renormalization-group fixed point, it must obey two crucial properties. The first is crossing symmetry: the FP tensor is required to satisfy a crossing relation, diagrammed in Figure 4a and written as

Crossing relation and coarse-graining condition for the FP tensor

Figure 4. (a) Crossing relation for the FP tensor. (b) Coarse-graining condition for the FP tensor.

∑m,MT(i,I)(j,J)(m,M)abcT(k,K)(l,L)(m,M)cda=∑n,NT(l,L)(i,I)(n,N)dabT(j,J)(k,K)(n,N)bcd.(4)\sum_{m,M}\mathcal{T}^{abc}_{(i,I)(j,J)(m,M)}\mathcal{T}^{cda}_{(k,K)(l,L)(m,M)} = \sum_{n,N}\mathcal{T}^{dab}_{(l,L)(i,I)(n,N)}\mathcal{T}^{bcd}_{(j,J)(k,K)(n,N)}. \tag*{(4)}

The second is the coarse-graining condition: contracting four FP tensors over their shared pairwise indices must recover a single rank-4 FP tensor up to an overall weight. Illustrated in Figure 4b, this condition involves summing over intermediate boundary conditions with the weight wj=S111/2Sj1w_j=S_{11}^{1/2}S_{j1}, where SS denotes the modular SS-matrix. The physical interpretation is that four triangles are glued into a square with a central hole; this hole is then eliminated by a weighted boundary-condition sum that makes it shrinkable.

This weighted sum is inspired by the notion of a “shrinkable boundary condition” due to Hung and Wan [2]. For diagonal RCFTs, performing the same weighted sum over Cardy states ∣i⟩c|i\rangle_c produces the vacuum Ishibashi state:

∑iwi∣i⟩=∣0⟩⟩c.(5)\sum_i w_i |i\rangle= |0\rangle\rangle_c. \tag*{(5)}

As the size of the central hole goes to zero, the vacuum state dominates the Ishibashi-state expansion. The hole therefore effectively disappears, and contracting the four tensors yields a rank-4 tensor associated with a square without a hole.

Tiling the Partition Function and Extracting the Spectrum

Armed with these properties, one can tile the FP tensors over a triangulated manifold to recover the full CFT partition function:

ZM=∑{(i,I)},{a}∏νωa∏ΔT(i,I)(j,J)(k,K)abc.(6)Z_M = \sum_{\{(i,I)\},\{a\}} \prod_{\nu}\omega_a \prod_{\Delta} T^{abc}_{(i,I)(j,J)(k,K)}. \tag*{(6)}

where the sum runs over all possible assignments of (i,I)(i,I) and aa to BCOs and boundary conditions, respectively; the factor ∏νωa\prod_{\nu}\omega_a assigns a vertex weight ωa\omega_a determined by the boundary condition aa at that vertex—these are precisely the shrinkable weights waw_a introduced in § 2.2; the product ∏ΔT(i,I)(j,J)(k,K)abc\prod_{\Delta}T^{abc}_{(i,I)(j,J)(k,K)} runs over all triangles, each contributing an FP tensor whose indices match the three BCOs and boundary conditions on its edges and corners.

A key application of this formalism is extracting the bulk conformal data through a cylinder construction [1]. The FP tensors—interpreted as correlation functions of BCOs on triangular patches—are assembled into a cylinder along the Euclidean time direction. The resulting cylinder partition function describes Euclidean time evolution; the transfer-matrix eigenvalues take the form Ne−(2π/n)(Δ−c/12)N e^{-(2\pi/n)(\Delta-c/12)}, where nn counts the number of tensor blocks around the circumference, Δ\Delta is the scaling dimension of the corresponding eigenstate and NN is an overall factor.

Diagonalizing this transfer matrix yields both Δ\Delta and the central charge cc of the CFT. This method accurately reproduces the spectrum of various minimal models [1]—including the Ising, Yang-Lee, and tricritical Ising models—even with only a few descendant levels kept.

Fermionic BCFT: the Free Majorana Fermion

The bosonic construction reviewed in § 2 turns boundary three-point functions into local tensors and removes the holes of the resulting triangulation by a weighted sum over conformal boundary conditions. Extending this construction to a spin CFT requires additional data and consistency conditions. Boundary fields are Z2\mathbb{Z}_2-graded, boundary zero modes can require auxiliary boundary degrees of freedom, and gluing fermionic tensors produces signs that must retain the spin-structure dependence of the continuum theory. In this section we make these ingredients explicit for the free Majorana fermion, the simplest fermionic CFT.

We first determine the boundary data in both the open- and closed-string channels. The boundary Majorana mode and Chan–Paton factors lead to a set of fermionic branes and graded boundary-changing operators (BCOs), while the spin Cardy condition fixes the corresponding boundary states. We then obtain the BCO three-point coefficients from the sewing constraints and use them to construct the fixed-point tensor in § 3.5. Finally, we formulate the fermionic contraction rules and shrinkable-boundary sum, verify the coarse-graining condition, and assemble the tensors on a cylinder. The signs associated with the non-contractible cycle distinguish the Neveu–Schwarz and Ramond spin structures, providing the prototype for the general A-series construction developed in § 5 and Appendix § 9.§ 2.1.

Free Fermion CFT

The free Majorana fermion has central charge c=1/2c = 1/2, and its Hilbert space on a cylinder splits into two distinct sectors determined by the periodicity of the fermion around the spatial cycle: the Neveu-Schwarz (NS) sector, where the fermion is antiperiodic, and the Ramond (R) sector, where it is periodic. The NS-sector primary fields are the identity 11 (h=hˉ=0h = \bar{h} = 0), the energy density ϵ\epsilon (h=hˉ=1/2h = \bar{h} = 1/2), the holomorphic fermion ψ\psi (h=1/2,hˉ=0h = 1/2,\bar{h} = 0), and its antiholomorphic partner ψˉ\bar{\psi} (h=0,hˉ=1/2h = 0,\bar{h} = 1/2); the R-sector primary fields are the spin field σ\sigma and the disorder operator μ\mu (both with h=hˉ=1/16h = \bar{h} = 1/16). We define fermion parity (−1)F(-1)^F in the NS sector by the parity of the number of fermionic modes acting on the NS vacuum. In the R sector, we choose the two Ramond ground states to have opposite fermion parity, and denote the even state as σ\sigma and the odd state μ\mu. Thus 11, ϵ\epsilon, and σ\sigma are called bosonic ((−1)F=+1(-1)^F = +1), while ψ\psi, ψˉ\bar{\psi}, and μ\mu are called fermionic ((−1)F=−1(-1)^F = -1).

Free Fermion Boundaries and BCOs

Boundary conditions and the boundary fermion

We next turn to the boundary data needed for the tensor construction: for a free Majorana fermion on the upper half-plane, a conformal boundary forces the bulk field to satisfy

ψ(z)=±ψ~(z)(z∈R),(7)\psi(z) = \pm\widetilde{\psi}(z) \qquad(z \in\mathbb{R}), \tag*{(7)}

which defines the B+B_+ and B−B_- boundaries, respectively [28]. When both ends carry the same boundary type, the open-string mode expansion has half-integer grading. With a stretch of notation we call that ”Neveu-Schwarz” type even though here it is not connected to spin structure:

ψ(z)=∑r∈Z+1/2ψrz−r−1/2,{ψr,ψs}=δr+s,0,(8)\psi(z) = \sum_{r \in\mathbb{Z}+1/2} \psi_r z^{-r-1/2}, \qquad\{\psi_r,\psi_s\} = \delta_{r+s,0}, \tag*{(8)}

For a pair of opposite boundaries (B−/B+B_-/B_+ or B+/B−B_+/B_-), the expansion is of integer grading, or “Ramond type”,

ψ(z)=∑n∈Zψnz−n−1/2,{ψn,ψm}=δn+m,0,(9)\psi(z) = \sum_{n \in\mathbb{Z}} \psi_n z^{-n-1/2}, \qquad\{\psi_n,\psi_m\} = \delta_{n+m,0}, \tag*{(9)}

which includes a Majorana zero mode ψ0\psi_0 with {ψ0,ψ0}=1\{\psi_0,\psi_0\} = 1.

This zero mode obstructs the implementation of fermion parity within a single ordinary (ungraded) irreducible representation: no operator (−1)F(-1)^F satisfying {(−1)F,ψ0}=0\{(-1)^F,\psi_0\} = 0 exists on such a representation [28]. The standard workaround is to introduce an additional free boundary Majorana fermion ξ\xi localized at the B−B_- boundary [28], obeying

{ξ,ξ}=1,{ξ,ψn}=0.(10)\{\xi,\xi\} = 1, \qquad\{\xi,\psi_n\} = 0. \tag*{(10)}

BCO spectrum

References

  1. [1]G. Cheng, L. Chen, Z.-C. Gu and L.-Y. Hung, Precision Reconstruction of Rational Conformal Field Theory from Exact Fixed-Point Tensor Network, Phys. Rev. X 15(1), 011073 (2025), doi:10.1103/PhysRevX.15.011073, 2311.18005.DOI
  2. [2]L. Y. Hung and G. Wong, Entanglement branes and factorization in conformal field theory, Phys. Rev. D 104(2), 026012 (2021), doi:10.1103/PhysRevD.104.026012, 1912.11201.DOI
  3. [3]E. M. Brehm and I. Runkel, Lattice models from CFT on surfaces with holes: I. Torus partition function via two lattice cells, J. Phys. A 55(23), 235001 (2022), doi:10.1088/1751-8121/ac6a91, 2112.01563.DOI
  4. [4]L. Chen, K. Ji, H. Zhang, C. Shen, R. Wang, X. Zeng and L.-Y. Hung, CFTD from TOFTD+1 via Holographic Tensor Network, and Precision Discretization of CFT2, Phys. Rev. X 14(4), 041033 (2024), doi:10.1103/PhysRevX.14.041033, 2210.12127.
  5. [5]M. Levin and C. P. Nave, Tensor renormalization group approach to 2D classical lattice models, Phys. Rev. Lett. 99, 120601 (2007), doi:10.1103/PhysRevLett.99.120601, cond-mat/0611687.DOI
  6. [6]Z.-C. Gu, M. Levin and X.-G. Wen, Tensor-entanglement renormalization group approach as a unified method for symmetry breaking and topological phase transitions, Phys. Rev. B 78(20), 205116 (2008), doi:10.1103/PhysRevB.78.205116, 0806.3509.DOI
  7. [7]Z.-C. Gu and X.-G. Wen, Tensor-Entanglement-Filtering Renormalization Approach and Symmetry Protected Topological Order, Phys. Rev. B 80, 155131 (2009), doi:10.1103/PhysRevB.80.155131, 0903.1069.DOI
  8. [8]G. Evenbly and G. Vidal, Tensor network renormalization, Physical review letters 115(18), 180405 (2015), doi:10.1103/PhysRevLett.115.180405.DOI
  9. [9]D. Gaiotto, A. Kapustin, N. Seiberg and B. Willett, Generalized global symmetries, Journal of High Energy Physics 2015(2), 1 (2015), doi:10.1007/jhep02(2015)172.DOI
  10. [10]D. S. Freed, G. W. Moore and C. Teleman, Topological symmetry in quantum field theory, Quantum Topology 15(3), 779 (2024), doi:10.4171/qt/223.DOI
  11. [11]W. Ji and X.-G. Wen, Categorical symmetry and noninvertible anomaly in symmetry-breaking and topological phase transitions, Physical Review Research 2(3), 033417 (2020), doi:10.1103/physrevresearch.2.033417.DOI
  12. [12]L. Kong, T. Lan, X.-G. Wen, Z.-H. Zhang and H. Zheng, Algebraic higher symmetry and categorical symmetry – a holographic and entanglement view of symmetry, Phys. Rev. Res. 2(4), 043086 (2020), doi:10.1103/PhysRevResearch.2.043086, 2005.14178.DOI
  13. [13]L. Kong, T. Lan, X.-G. Wen, Z.-H. Zhang and H. Zheng, Classification of topological phases with finite internal symmetries in all dimensions, JHEP 09, 093 (2020), doi:10.1007/JHEP09(2020)093, 2003.08898.DOI
  14. [14]A. Chatterjee and X.-G. Wen, Symmetry as a shadow of topological order and a derivation of topological holographic principle, Phys. Rev. B 107(15), 155136 (2023), doi:10.1103/PhysRevB.107.155136, 2203.03596.DOI
  15. [15]F. Apruzzi, F. Bonetti, I. García Etxebarria, S. S. Hosseini and S. Schäfer-Nameki, Symmetry tfts from string theory, Communications in mathematical physics 402(1), 895 (2023), doi:10.1007/s00220-023-04737-2.DOI
  16. [16]D. S. Freed and C. Teleman, Topological dualities in the Ising model, Geom. Topol. 26, 1907 (2022), doi:10.2140/gt.2022.26.1907, 1806.00008.DOI
  17. [17]L. Kong and H. Zheng, A mathematical theory of gapless edges of 2d topological orders. Part I, JHEP 02, 150 (2020), doi:10.1007/JHEP02(2020)150, 1905.04924.DOI
  18. [18]L. Bhardwaj and Y. Tachikawa, On finite symmetries and their gauging in two dimensions, Journal of High Energy Physics 2018(3), 1 (2018), doi:10.1007/jhep03(2018)189.DOI
  19. [19]V. V. Albert, D. Aasen, W. Xu, W. Ji, J. Alicea and J. Preskill, Spin chains, defects, and quantum wires for the quantum-double edge (2021), 2111.12096.arxiv.org/abs/2111.12096
  20. [20]R. Vanhove, M. Bal, D. J. Williamson, N. Bultinck, J. Haegeman and F. Verstraete, Mapping topological to conformal field theories through strange correlators, Physical review letters 121(17), 177203 (2018), doi:10.1103/physrevlett.121.177203.DOI
  21. [21]D. Aasen, R. S. Mong and P. Fendley, Topological defects on the lattice: I. the ising model, Journal of Physics A: Mathematical and Theoretical 49(35), 354001 (2016), doi:10.1088/1751-8113/49/35/354001.DOI
  22. [22]D. Aasen, P. Fendley and R. S. K. Mong, Topological defects on the lattice: dualities and degeneracies (2020), 2008.08598.arxiv.org/abs/2008.08598
  23. [23]G. Cheng, D.-Y. Bao and Z.-C. Gu, Fixed-point tensor network for compactified boson conformal field theory (2026), 2607.03534.arxiv.org/abs/2607.03534
  24. [24]D.-Y. Bao, G. Cheng, H.-H. Song and Z.-C. Gu, Tensor complex renormalization with generalized symmetry and topological bootstrap (2025), 2511.22647.arxiv.org/abs/2511.22647
  25. [25]C. Meng, T. Lan and Z. Gu, Algebraic tensor network renormalization and holographic duality (2026), 2610.08787.arxiv.org/abs/2610.08787
  26. [26]L. Chen, L.-Y. Hung, Y. Jiang and B.-X. Lao, Deriving the non-perturbative gravitational dual of quantum Liouville theory from BCFT operator algebra, SciPost Phys. 19(6), 163 (2025), doi:10.21468/SciPostPhys.19.6.163, 2403.03179.DOI
  27. [27]N. Bao, L.-Y. Hung, Y. Jiang and Z. Liu, QG from SymQRG: AdS₃/CFT₂ correspondence as topological symmetry-preserving quantum RG flow (2024), 2412.12045.arxiv.org/abs/2412.12045
  28. [28]K. Hori, Notes on bosonization with boundary: Dedicated to tohru eguchi for his 60th birthday, Prog. Theor. Phys. Suppl. 177, 42 (2009), doi:10.1143/PTPS.177.42.DOI
  29. [29]H. Ebisu and M. Watanabe, Fermionization of conformal boundary states, Phys. Rev. B 104(19), 195124 (2021), doi:10.1103/PhysRevB.104.195124, 2103.01101.DOI
  30. [30]P. Di Francesco, P. Mathieu and D. Senechal, Conformal Field Theory, Graduate Texts in Contemporary Physics. Springer, New York, NY, ISBN 978-1-4612-7475-9 (1997).
  31. [31]I. Runkel and G. M. T. Watts, Fermionic CFTs and classifying algebras, JHEP 06, 025 (2020), doi:10.1007/JHEP06(2020)025, 2001.05055.DOI
  32. [32]I. Runkel, Boundary structure constants for the A series Virasoro minimal models, Nucl. Phys. B 549, 563 (1999), doi:10.1016/S0550-3213(99)00125-X, hep-th/9811178.DOI
  33. [33]Q. Mortier, L. Devos, L. Burgelman, B. Vanhecke, N. Bultinck, F. Verstraete, J. Haegeman and L. Vanderstraeten, Fermionic tensor network methods, SciPost Phys. 18(1), 012 (2025), doi:10.21468/SciPostPhys.18.1.012, 2404.14611.DOI
  34. [34]S. Ino, S. Morita and N. Kawashima, Boundary tensor renormalization group, Phys. Rev. B 100, 035449 (2019), doi:10.1103/PhysRevB.100.035449, 1905.02351.
  35. [35]S. Ino, S. Morita and N. Kawashima, Boundary conformal spectrum and surface critical behavior of classical spin systems: A tensor network renormalization study, Phys. Rev. B 101, 155418 (2020), doi:10.1103/PhysRevB.101.155418, 1911.09907.
  36. [36]S. Ino, Boundary CFT and tensor network approach to surface critical phenomena of the tricritical 3-state potts model, J. Stat. Phys. 182, 56 (2021), doi:10.1007/s10955-021-02728-y, 2007.03182.
  37. [37]J. Fuchs, I. Runkel and C. Schweigert, TFT construction of RCFT correlators I: Partition functions, Nucl. Phys. B 646, 353 (2002), doi:10.1016/S0550-3213(02)00744-7, hep-th/0204148.DOI
  38. [38]J. Fuchs, I. Runkel and C. Schweigert, TFT construction of RCFT correlators IV: Structure constants and correlation functions, Nucl. Phys. B 715, 539 (2005), doi:10.1016/j.nuclphysb.2005.03.018, hep-th/0412290.DOI
  39. [39]I. Runkel, L. Szegedy and G. M. T. Watts, Parity and spin CFT with boundaries and defects, SciPost Phys. 15(5), 207 (2023), doi:10.21468/SciPostPhys.15.5.207, 2210.01057.DOI
  40. [40]S. Novak and I. Runkel, Spin from defects in two-dimensional quantum field theory, J. Math. Phys. 61(6), 063510 (2020), doi:10.1063/1.5129435, 1506.07547.DOI
  41. [41]Y. Wan and C. Wang, Fermion condensation and gapped domain walls in topological orders, JHEP 03, 172 (2017), doi:10.1007/JHEP03(2017)172, 1607.01388.DOI
  42. [42]J. Lou, C. Shen, C. Chen and L.-Y. Hung, A (dummy’s) guide to working with gapped boundaries via (fermion) condensation, JHEP 02, 171 (2021), doi:10.1007/JHEP02(2021)171, 2007.10562.DOI
  43. [43]D. Aasen, E. Lake and K. Walker, Fermion condensation and super pivotal categories, Journal of Mathematical Physics 60(12), 121901 (2019), doi:10.1063/1.5045669, 1709.01941.DOI
  44. [44]S. Novak and I. Runkel, State sum construction of two-dimensional topological quantum field theories on spin surfaces, J. Knot Theor. Ramifications 24(05), 1550028 (2015), doi:10.1142/S0218216515500285, 1402.2839.DOI
  45. [45]I. Runkel and L. Szegedy, Topological field theory on r-spin surfaces and the Arf-invariant, J. Math. Phys. 62(10), 102302 (2021), doi:10.1063/5.0037826, 1802.09978.DOI
  46. [46]W. H. Stern and L. Szegedy, Topological field theories on open-closed r-spin surfaces, Topology and its Applications 312, 108062 (2022), doi:10.1016/j.topol.2022.108062, 2004.14181.DOI
  47. [47]L. Lootens, J. Fuchs, J. Haegeman, C. Schweigert and F. Verstraete, Matrix product operator symmetries and intertwiners in string-nets with domain walls, SciPost Phys. 10(3), 053 (2021), doi:10.21468/SciPostPhys.10.3.053, 2008.11187.DOI
  48. [48]Y. Fukusumi, Y. Tachikawa and Y. Zheng, Fermionization and boundary states in 1+1 dimensions, SciPost Phys. 11(4), 082 (2021), doi:10.21468/SciPostPhys.11.4.082, 2103.00746.DOI
  49. [49]O. Buerschaper, M. Aguado and G. Vidal, Explicit tensor network representation for the ground states of string-net models, Phys. Rev. B 79(8), 085119 (2009), doi:10.1103/PhysRevB.79.085119, 0809.2393.DOI

Paper details

vlnc:W_uj5ydgw9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

AI

View statement
Looking for related papers…
Contents