betaFeedback

WorksMathematics

Sharp Finite-Time Blow-Up for Unforced Axisymmetric Euler Without Swirl via Multiscale Data

Abstract

For the unforced Euler equations, we construct a compactly supported initial vorticity within the class of axisymmetric flows without swirl, whose solution blows up in finite time. The initial vorticity belongs simultaneously to every Hölder space CαC^α, α<1/3α<1/3. This is sharp given that global regularity is known when α=1/3α=1/3 in the case of axisymmetric flows without swirl. Previous constructions by Shkoller \cite{Shk26}, Chen \cite{Chen26I,Chen26II}, and Shao–Wei–Zhang–Zhang \cite{SWZZ26} establish blow-up for each prescribed exponent αα in the same sharp range. Our construction achieves simultaneous membership in all these spaces. In addition, our construction is short. Our proof uses multiscale initial data, in the spirit of Kim–Jeong~\cite{KJ22}, Córdoba–Martínez-Zoroa–Zheng~\cite{CMZZ25}, and Bang–Cheskidov~\cite{BC26}. The blow-up mechanism is a forward cascade through successively smaller scales. A main difficulty in approaching the critical exponent 1/31/3 is caused by large self-deformation. Our main idea to overcome this difficulty is to obtain a lower bound for strain at the stationary non-smooth point by using angular redistribution. A related outstanding open problem is to establish an unforced Euler blow-up from smooth data in the case of axisymmetric flows with swirl. A recent multiscale construction by OpenAI for the unforced Euler equations is, however, non-axisymmetric. Although we work in the no-swirl class, the axisymmetric multiscale mechanism developed here may offer a possible route toward the still-open problem of axisymmetric smooth blow-up.

Introduction

We consider the incompressible Euler equations

∂tu+u⋅∇u+∇p=0,div⁡u=0,u∣t=0=u0(1)\partial_t u + u \cdot\nabla u + \nabla p = 0,\qquad\operatorname{div} u = 0,\qquad u|_{t=0} = u_0 \tag*{(1)}

on R3\mathbb{R}^3, where u(t,x)∈R3u(t,x) \in\mathbb{R}^3 is the velocity and p(t,x)∈Rp(t,x) \in\mathbb{R} is the pressure. The evolution of the vorticity ω=curl⁡u\omega= \operatorname{curl} u is governed by

∂tω+u⋅∇ω=ω⋅∇u.\partial_t \omega+ u \cdot\nabla\omega= \omega\cdot\nabla u.

The interaction between transport, vortex stretching, and the nonlocal recovery of velocity from vorticity is central to the regularity theory. In this paper we study finite-time singularity formation in the three-dimensional axisymmetric class without swirl.

Classical local theory and continuation

The local theory in Hölder spaces goes back to [Lic25], [Gun26]. In the finite-energy setting used here, a divergence-free datum u0∈C1,α(R3)∩L2(R3)u_0 \in C^{1,\alpha}(\mathbb{R}^3) \cap L^2(\mathbb{R}^3), 0<α<10 < \alpha< 1, generates a unique local classical solution. More generally, Ck,αC^{k,\alpha} regularity persists locally for integers k≥1k \ge1. The later Sobolev theory includes the work of Ebin and Marsden [EM70] and Kato [Kat72]. We refer to [MB01, BCD11] for modern accounts of these theories.

The continuation criterion of Beale, Kato, and Majda [4] identifies vorticity amplification as the obstruction to extending a classical solution. In the Hölder setting above, a finite maximal lifespan T∗T_\ast necessarily satisfies

∫0T∗∥ω(t)∥L∞(R3) dt=∞.\int_0^{T_\ast} \lVert\omega(t) \rVert_{L^\infty(\mathbb{R}^3)} \,\mathrm{d}t = \infty.

See [6 Theorem 4.2.3]. In two dimensions, transport without vortex stretching conserves the supremum norm of vorticity and yields global regularity. Axisymmetry without swirl retains vortex stretching but provides an additional transported quantity.

Axisymmetry and the global regularity threshold

Let e1=(1,0,0)\mathbf{e}_1 = (1, 0, 0), e2=(0,1,0)\mathbf{e}_2 = (0, 1, 0), and e3=(0,0,1)\mathbf{e}_3 = (0, 0, 1). In cylindrical coordinates,

x=(rcos⁡θ,rsin⁡θ,z),er=(cos⁡θ,sin⁡θ,0),eθ=(−sin⁡θ,cos⁡θ,0).x = (r \cos\theta, r \sin\theta, z), \qquad\mathbf{e}_r = (\cos\theta, \sin\theta, 0), \qquad\mathbf{e}_\theta= (-\sin\theta, \cos\theta, 0).

An axisymmetric velocity without swirl is of the form

u(t,x)=ur(t,r,z)er+uz(t,r,z)e3.u(t,x) = u^r(t,r,z)\mathbf{e}_r + u^z(t,r,z)\mathbf{e}_3.

Its vector vorticity ω=curl⁡u\boldsymbol{\omega} = \operatorname{curl} u is purely azimuthal. With the sign convention used in the construction, the scalar and relative-vorticity variables are

ω=ωeθ,q=−ωr.\boldsymbol{\omega} = \omega\mathbf{e}_\theta, \qquad q = -\frac{\omega}{r}.

Here ω\omega follows the scalar-vorticity convention of [3], while qq is the negative of their relative vorticity. The sign is chosen so that q≥0q \ge0 in the upper half-space for our data. The Euler equations imply

∂tq+ur∂rq+uz∂zq=0.(2)\partial_t q + u^r \partial_r q + u^z \partial_z q = 0. \tag*{(2)}

Although qq is transported, ω=−rq\omega= -rq changes along trajectories as their distance from the axis changes. Moreover, Hölder continuity of ω\omega does not imply boundedness of qq. This distinction allows singularity formation in the class considered here.

Global regularity for smooth, sufficiently decaying axisymmetric Euler flows without swirl goes back to [UY68], with subsequent refinements by [SR94], [SY94]. Danchin [Dan07] extended the global theory to bounded vorticity with suitable decay and relative vorticity in L3,1(R3)L^{3,1}(\mathbb{R}^3). For finite-energy axisymmetric no-swirl data with compactly supported vorticity, this yields global classical solutions when u0∈C1,α(R3)u_0 \in C^{1,\alpha}(\mathbb{R}^3), 1/3<α<11/3 < \alpha< 1. The result of Shao, Wei, and Z. Zhang [SWZ26] also covers the endpoint C1/3C^{1/3} vorticity class under the same finite-energy and compact-support assumptions.

Thus the possible blow-up range for the compact-vorticity Hölder data considered here lies strictly below 1/31/3.

Singularity formation below the threshold

Elgindi [Elg21] constructed self-similar axisymmetric no-swirl blow-up solutions with C1,αC^{1,\alpha} velocity for sufficiently small α>0\alpha> 0. Elgindi, Ghoul, and Masmoudi [EGM21] developed stability of the self-similar construction and finite-energy localization.

Córdoba, Martinez-Zoroa, and Zheng [CMZZ25] in 2025 introduced a multiscale construction based on infinitely many interacting vorticity regions separated by vorticity-free regions, without using a self-similar construction. They obtained finite-energy blow-up solutions with velocity in C1,α(R3)∩C∞(R3∖{0})C^{1,\alpha}(\mathbb{R}^3) \cap C^\infty(\mathbb{R}^3 \setminus\{0\}) for a small positive exponent α\alpha. The present paper extends their multiscale construction to the sharp range α∈(0,1/3)\alpha\in(0, 1/3).

Recent works reach every fixed 0<α<1/30 < \alpha< 1/3. Chen [7, 8] constructs self-similar profiles from a one-dimensional limiting model and proves asymptotically self-similar blow-up with compactly supported CαC^\alpha vorticity and finite energy. Shao, Wei, P. Zhang, and Z. Zhang [SWZZ26] construct exact self-similar profiles in dimension d≥3d \ge3 for 0<α<1−2/d0 < \alpha< 1 - 2/d; finite-codimensional stability yields finite-energy, asymptotically self-similar blow-up with compact initial vorticity and C1,αC^{1,\alpha} velocity smooth away from the origin. Shkoller [Shk26] provides a Lagrangian construction based on strain rates and pressure for each 0<α<1/30 < \alpha< 1/3. This raises the question addressed here: can one initial datum belong to every supercritical Hölder class and still develop a singularity?

Table 2 compares these sharp Hölder blow-up results.

FeatureShkoller [Shk26]Chen [7, 8]Shao–Wei–Zhang–Zhang [SWZZ26]This paper
Hölder regularity of u0u_0C1,αC^{1,\alpha} for each prescribed α\alphaC1,αC^{1,\alpha} for each prescribed α\alphaC1,αC^{1,\alpha} for each prescribed α\alphaOne datum in every C1,αC^{1,\alpha} simultaneously
Initial smoothnessAxis cuspAxis cuspC∞C^\infty off the originC∞C^\infty off the origin
Initial vorticity supportNoncompact, with decayCompactCompactCompact
ConstructionLagrangian analysis of strain rates and pressureSelf-similar profiles lifted from a 1D modelSelf-similar elliptic–transport profilesForward multiscale ring cascade
Computer-assisted stepNone1D profile in Part INoneNone
Blow-up descriptionType-I; Lagrangian collapseType-I; asymptotically self-similarType-I; asymptotically self-similarFinite lifespan; no prescribed rate
Stability / profile freedomAdmissible angular perturbationsFinite-codimensional profile stabilityFinite-codimensional profile stabilityAny admissible ring profile

Table 2. Sharp Hölder blow-up constructions for unforced axisymmetric Euler without swirl on R3\mathbb{R}^3. All four yield finite-energy solutions. Throughout, 0<α<1/30 < \alpha< 1/3.

The multiscale method and smooth-data blow-up

Multiscale constructions use multi-scale data for which large scales stretch and amplify smaller scales successively. Kim and Jeong [KJ22] used axisymmetric multiscale vorticity rings to prove critical Sobolev and Lorentz ill-posedness. Córdoba, Martínez-Zoroa, and Zheng [CMZZ25] constructed Hölder-class blow-up from infinitely many interacting vorticity regions, working backward-in-time from terminal configurations in a small Hölder exponent regime; see Remark 1.4.

In [3], we developed a forward-in-time ring cascade that accounts for geometric self-slowdown of the strain rate ∂rur(t,0,0)\partial_r u^r(t, 0, 0), proving vorticity norm inflation and instantaneous blow-up for bounded vorticity with relative vorticity in L3,sL^{3,s}, for every s>1s > 1, extending a Lorentz result by Kim–Jeong [KJ22] above from large ss to every s>1s > 1. The present paper establishes finite-time blow-up in Hölder spaces forward-in-time and extends the multiscale construction in [CMZZ25] to the sharp Hölder range; see Remark 1.5 for comparison.

Outside the axisymmetric case without swirl, smooth data may develop a finite-time blow up. One may consider either axisymmetric flows with swirl or non-axisymmetric flows. Córdoba and Martínez-Zoroa [CMZ23] constructed non-axisymmetric forced Euler blow-up with force uniformly bounded in C1/2−ε∩L2C^{1/2-\varepsilon} \cap L^2. Alpaide and Buckmaster’s work-in-progress note [1] obtained smooth-data axisymmetric blow-up with a force smooth in space and time through blow-up. OpenAI [OAI26a] announced unforced Euler blow-up from smooth, compactly supported initial velocity. Their non-axisymmetric construction successively amplifies localized oscillations and corrects them to exact Euler solutions, whose gradients amplify the next oscillations. Related forced multiscale constructions include IPM [CMZ25], Boussinesq [CLM25], and Navier–Stokes [CMZZ26, OAI26b], with fractional dissipation in [CMZZ26].

The outstanding goal is smooth-data blow-up for unforced axisymmetric Euler on R3\mathbb{R}^3. The smooth-data results of Chen–Hou [9] involve a solid boundary, while the whole-space axisymmetric result [1] uses forcing and OpenAI’s unforced construction is non-axisymmetric. Although our datum is not smooth at the origin and our solution has no swirl, the unforced forward-in-scale cascade developed here, including its control of large self-deformation (explained below in Remark 1.5 and in Table 1), may provide a route toward that goal. Table 1 compares all these multiscale constructions. For more multiscale constructions on the Euler equations, see [11 HQSZ26, 10].

WorkTime organizationSelf-deformation / self-interactionSymmetryExternal force
Critical-space local ill-posedness
Kim–Jeong [KJ22]ForwardSmallAxisymmetric, no swirlNone
Bang–Cheskidov [3]ForwardSmallAxisymmetric, no swirlNone
Axisymmetric no-swirl blow-up in Hölder classes
CMZZ [CMZZ25]BackwardSmallAxisymmetric, no swirlNone
This paperForwardLarge self-deformation allowedAxisymmetric, no swirlNone
Higher-regularity and smooth-data blow-up
CM [CMZ23]BackwardSmall; residual canceled by forcingNon-axisymmetricPresent
Alpöge–Buckmaster [1]ForwardHigher-order corrections; residual forcedAxisymmetric, with swirlPresent
OpenAI [OAI26a]ForwardSmallNon-axisymmetricNone
Smooth-data open problemNot applicableNot applicableAxisymmetric, with swirlNone

Table 1. Selected multiscale Euler constructions and the smooth-data axisymmetric target.

Main results

Our initial datum belongs to every supercritical Hölder class and consists of sparse anisotropic vortex rings. The first theorem states the main blow-up result. The second one specifies our multiscale datum more explicitly.

Theorem 1.1 (Finite time blow-up). There exists a divergence-free axisymmetric velocity without swirl

u0∈L2(R3)∩⋂0<α<1/3C1,α(R3)∩C∞(R3∖{0}),u_0 \in L^2(\mathbb{R}^3) \cap\bigcap_{0<\alpha<1/3} C^{1,\alpha}(\mathbb{R}^3) \cap C^\infty(\mathbb{R}^3 \setminus\{0\}),

with compactly supported vorticity ω0=curl⁡u0\omega_0=\operatorname{curl}u_0 such that the classical solution u(t)u(t) starting from u0u_0 satisfies

∫0T∗∥ω(t)∥L∞(R3) dt=∞,ω=curl⁡u,\int_0^{T_*} \|\omega(t)\|_{L^\infty(\mathbb{R}^3)}\,\mathrm{d}t = \infty,\qquad\omega=\operatorname{curl}u,

for some finite T∗>0T_*>0.

References

  1. [1]L. Alpöge and T. Buckmaster, Blowup for the Euler equations with smooth forcing, preprint (2026). https://cims.nyu.edu/~tristanb/euler.pdf.
  2. [3]J. Bang and A. Cheskidov, Sharp ill-posedness of the Euler equations in Lorentz spaces, arXiv:2605.16502v1 (2026). https://arxiv.org/abs/2605.16502v1.
  3. [4]J. T. Beale, T. Kato, and A. Majda, Remarks on the breakdown of smooth solutions for the 3-D Euler equations, Communications in Mathematical Physics 94 (1984), 61–66. https://doi.org/10.1007/BF01212349.
  4. [5]D. Cao, J. Fan, and G. Qin, Linear growth of the vorticity maximum for axisymmetric Euler flows without swirl, arXiv:2511.03171v4 (2026). https://arxiv.org/abs/2511.03171v4.
  5. [6]J.-Y. Chemin, Fluides parfaits incompressibles, Astérisque 230 (1995). https://www.numdam.org/item/AST_1995__230__1_0/.
  6. [7]J. Chen, Asymptotically self-similar blowup for 3D incompressible Euler with C^{1,1/3−} velocity I: C∞ ∼ 1D limiting profiles, arXiv:2605.15149v1 (2026). https://arxiv.org/abs/2605.15149v1.
  7. [8]J. Chen, Asymptotically self-similar blowup for 3D incompressible Euler with C^{1,1/3−} velocity II: 3D profiles, blowup, and limiting behavior, arXiv:2605.15130v2 (2026). https://arxiv.org/abs/2605.15130v2.
  8. [9]J. Chen and T. Y. Hou, Singularity formation in 3D Euler equations with smooth initial data and boundary, Proceedings of the National Academy of Sciences 122 (2025), e2500940122. https://doi.org/10.1073/pnas.2500940122.
  9. [10]X. Chen and Z. Zhang, Double exponential growth for the Euler equation on the whole plane, arXiv:2611.11705 (2026). https://arxiv.org/abs/2611.11705.
  10. [11]H. Choi, Nonuniqueness of solutions to 2D incompressible Euler equations with unbounded vorticity, arXiv:2610.37653 (2026). https://arxiv.org/abs/2610.37653.
  11. [12]K. Choi and I.-J. Jeong, On vortex stretching for anti-parallel axisymmetric flows, American Journal of Mathematics 147 (2025), 1251–1284. https://doi.org/10.1353/ajm.2025.a971091.
  12. [13]P. Constantin, V. Vicol, and J. Wu, Analyticity of Lagrangian trajectories for well posed inviscid incompressible fluid models, Advances in Mathematics 285 (2015), 352–393. https://doi.org/10.1016/j.aim.2015.05.019.

Paper details

vlnc:W_unmdet8u
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents