WorksPhysics and Astronomy
Simultaneous detection of spin and orbital angular momentum of light through scattering from a single silver nanowire
Abstract
In recent times the spin angular momentum (SAM) and orbital angular momentum (OAM) of light have gained prominence because of their significance in optical communication systems, micromanipulation, sub-wavelength position sensing. To this end, simultaneous detection of SAM and OAM of light beam is one of the important topics of research from both application and fundamental spin-orbit interaction (SOI) point of view. While interferometry and metasurface based approaches have been able to detect the states, our approach involves elastic scattering from a monocrystalline silver nanowire for the simultaneous detection of SAM and OAM state of a circularly polarized Laguerre-Gaussian (LG) beam. By employing Fourier plane (FP) microscopy, the transmitted scattered light intensity distribution in the FP is analyzed to reconstruct the SAM and OAM state unambiguously. The SAM and OAM induced transverse energy flow as well as the polarization dependent scattering characteristics of the nanowire is investigated to understand the detection mechanism. Our method is devoid of complex nanofabrication techniques required for metasurface based approaches and to our knowledge, is a first example of single nano-object based simultaneous SAM and OAM detection. The study will further the understanding of SOI effects and can be useful for on-chip optical detection and manipulation.
is investigated to understand the detection mechanism. Our method is devoid of complex nanofabrication techniques required for metasurface based approaches and to our knowledge, is a first example of single nano-object based simultaneous SAM and OAM detection. The study will further the understanding of SOI effects and can be useful for on-chip optical detection and manipulation.
Introduction
A light beam can possess spin angular momentum (SAM) manifested through its circular polarization state, as well as orbital angular momentum (OAM), manifested through its helical phase front. [1, 2, 3] SAM can have two orthogonal states corresponding to left- and right-circularly polarized light, whereas OAM is unbounded with its infinite orthogonal states, corresponding to the topological charge of vortex beams such as Laguerre-Gaussian beams (, topological charge, radial index). [4, 5] This angular momentum of light corresponds to an energy flow in the beam in the transverse plane with respect to the propagation direction, termed as transverse energy flow. [6] Interaction of the transverse energy flow of the beam with a medium may lead to spin-orbit interaction (SOI) induced effects [7, 8, 9, 10] such as directional scattering, [11] interconversion of angular momentum [12, 13] as well as micro manipulation [14] and position sensing. [15] Additionally, beams possessing SAM and OAM have been envisaged for optical communication, [16, 17, 18, 19] quantum information [20] applications due to their orthogonal states.
To this end, deterministic sensing of SAM and OAM has become one of the important topics of research in recent years. Detection of OAM in macroscopic scale has been achieved through conventional interferometry [21, 22, 23] as well as diffraction [24, 25, 26, 27] and projection through a reciprocal forked diffraction grating. [20] These methods are constrained by their complicated optical setups. With the advancement of nanofabrication, generation as well as detection of OAM and SAM has been achieved at nanoscale. [28, 29, 30, 31, 32] At these length scales, the on-chip plasmonic devices offer great advancement from the interferometric based techniques with their lower footprint. But, in most cases these devices involve complex fabrication methods.
Thus, there is a requirement of methods which are devoid of these complications and possess smaller footprint for chip-scale applications. Additionally, differential sensing of spin and orbital angular momentum component of a light beam using a single nano-object is yet to be achieved. With this motivation, herein we propose a chemically synthesized quasi-one-dimensional monocrystalline silver nanowire (AgNW) as a sensor for the simultaneous detection of SAM and OAM of light. AgNWs have gained prominence because of their simple preparation method and monocrystalline characteristics. The solution phase synthesis allows them to be self-assembled on any desired substrate and having necessary tunability.[33, 34] The uniform morphology renders them useful for low loss surface plasmon waveguiding property [35] and makes them ideal for fundamental photonic circuit applications such as plasmonic waveguide, [35, 36] plasmonic antenna, [37, 38] logic gates [39] as well as for optoelectrical applications. [40] Additionally, in our previous reports we have shown how an AgNW can act as a plasmonic scatterer in sensing total energy flow of an incident beam [41, 42] and as well as probing the inherent spin-Hall effect. [43]
In this work, a single AgNW dropcasted on a glass substrate has been used as a nanoscopic strip diffractor and the scattered pattern has been extensively analyzed to ascertain the spin and orbital angular momentum state of the incident light, as shown in Figure 1. By considering the total transverse energy flow, as well as the individual component due to spin flow and orbital flow at the focus, we are able to distinguish their individual effect on the scattering pattern, allowing us to unambiguously determine their value.

Figure 1. Schematic of the experimental configuration. An AgNW placed on a glass substrate scatters the incident LG beam to determine its total angular momentum state.
Results and Discussion
Theoretical Calculation
In order to distinguish spin and orbital angular momentum, we need to characterize their contribution to the energy flow of the beam.[6] The energy flow of an electromagnetic field, defined by its Poynting vector, can be decomposed into its longitudinal and transverse part. For example, Laguerre-Gaussian (LG) beams, commonly known as vortex beams, possess transverse energy flow corresponding to its orbital flow, owing to its helical wave front. The magnitude and the sense of flow gets dictated by the magnitude and sign of the topological charge of the beam. On the other hand, circularly polarized Gaussian beams exhibit transverse energy flow corresponding to its spin flow, the sense of which gets dictated by the handedness of the circular polarization.
To investigate the interaction due to transverse energy flow at nanoscale, we employ the Debye-Wolf integral formulation[44, 45] to find out the optical electric field () and magnetic field () components at the focal plane of a 0.5 NA lens.[46] From these, the corresponding spin flow density (SFD, ) and orbital flow density (OFD, ) about axis (propagation direction) can be calculated by considering the transverse component (denoted by superscript ) of the following equations.[6]
Here and is the oscillating frequency, and are the electric permittivity and magnetic permeability of vaccum respectively and (). Figure 2(a) and (b) show the calculated OFD, SFD and total transverse energy flow density () corresponding to left-circularly polarized () and right-circularly polarized () beams at wavelength nm. The total electric field intensity at the focal plane is shown in the inset. As expected, for both and polarized beam, the OFD has similar magnitude and similar counter-clock orbital flow sense. But, for beam, the SFD and the corresponding spin flow have both clockwise and counter-clock energy flow in its inner and outer part respectively. Additionally, the magnitude of SFD is higher in its inner radius ( at ) and slightly lower in its outer radius ( at ). It is exactly opposite for the beam. Hence, for beam, counter-clock orbital flow towards the center cancels the clockwise spin flow, whereas, in the outer part the counter-clock spin flow gets added up with orbital flow, resulting an overall counter clock total transverse energy flow having a maximum magnitude of at radius . For the counter-clock inner spin flow gets added up with the counter-clock orbital flow resulting in higher counter-clock transverse energy flow, at . The OFD, SFD and the total transverse energy flow density radial line profile at the focal plane from 0 to corresponding to and polarized beams are shown in Figure 2(c) and (d) respectively. In this context, it is important to point out the subtle differences of the intensity profile for and polarized beams as focusing of circularly polarized LG beam aids spin-to-orbital angular momentum transformation. [12] The field calculations and corresponding phase profiles are shown in the supplementary information S1.

Figure 2. Theoretically calculated focal orbital flow density (OFD), spin flow density (SFD) and total transverse energy flow distribution for (a) left-circularly polarized () and, (b) right-circularly polarized () beam. Inset shows the corresponding total field intensity. (c) and (d) represents the OFD, SFD and total transverse energy flow distribution line profile along axis from 0 to .
Experimental Implementation
The focal optical field and its orbital and spin flow constituents, upon interaction with a nano structure will lead to flow dependant scattering allowing us to determine its state. Although different nano-structures have been shown to have exhibited transverse energy flow dependant scattering, [30, 31, 41, 42, 47] differential sensing of spin and orbital flow is yet to be achieved by a single nano-object. To that end, we use a single crystalline silver nanowire (AgNW) to scatter the incident optical field and sense its properties. The implementation of forward scattering configuration is achieved by dropcasting AgNWs of width nm onto a glass cover-slip, which acts as a nanoscopic strip scatterer [24, 27] for the incident optical fields. A NA objective lens has been used to focus the incident beam and the scattered signal was collected using a NA lens, in the transmission configuration (Figure 3(a)). A low power of has been used for the scattering of beam. Fourier plane (FP) intensity distribution of the forward scattered light was collected by projecting the back focal plane of the collection objective lens onto a CCD using relay optics. [48, 49] The collected FP intensity distribution can be divided into two regions, sub-critical region (NA ) and super-critical region (NA ). The incident NA part (NA 0 – 0.5) in the sub-critical region is dominated by the un-scattered incident light, and is omitted from our analysis, appears as a black disk at the center of the measured FP. Details of the experimental configuration is elaborated in the experimental section and supplementary information S2.

Figure 3. (a) Experimental configuration of measurement scheme for the Fourier plane (FP). Inset shows the bright field optical micrograph of AgNW. Experimentally measured Fourier plane intensity distribution for scattering of (b) polarized and, (c) polarized beam. Inner and outer white circles represent the critical angle at the air-glass interface and the collection limit of the objective lens NA respectively. Incident NA region is blocked and appears as a black disk at the center. (d) Simulated near-field electric field intensity distribution at the air-glass interface for and polarized incident beam. (e) Corresponding scattered total transverse energy flow density () distribution for and polarized beam. The black arrows indicate the energy flow direction.
Polarization dependence of scattering intensity
To determine the contribution due SAM and OAM in the scattered FP, it is imperative to understand the scattered FP patterns of its constituent linear polarization components. The longitudinally polarized optical field () with respect to the nanowire long axis ( axis) gets scattered in the sub-critical region, as shown in the experimentally measured data in Figure 3(b) for polarized beam. On the other hand, the transversely polarized fields () lead to near-field (NF) at the NW edges, and consequent signal at the super-critical region in the FP as well as sub-critical region, shown in Figure 3(c) for polarized beam. Additionally, the polarization of the scattered light for the polarized incident beam is predominantly polarized and similarly, for polarized beam scattering, the light scattered in the sub- and super-critical region is mostly polarized (supplementary information S3). Thus, for scattering of circularly polarized beam, the state of circular polarization can be determined by analyzing the sub-critical region intensity distribution as only in this regime both in-plane and components of polarization scatter. Whereas, in super-critical region, predominantly scattered light is from polarized field and will posses information about OAM state of the incident beam. This has been further confirmed by analyzing the FP due to polarized beam (supplementary information S3), where upon analyzing the FP intensity distribution for and polarized components, we can recover the FP intensity distribution for and polarized intensity distribution as shown in Figure 3(b) and (c) respectively. It must also be observed that both FP intensity distribution for and polarized beam exhibit two lobes as well as preferential scattering pattern due to their orbital flow.[42] But, the preference for polarized case is opposite to that of polarized case. This can be attributed to the polarization dependent interaction of the NW with the incident beam as shown through numerical simulation in Figure 3(d) and (e). The details of the finite element method numerical simulation and geometry is given in supplementary
information S4. For polarized beam the field gets scattered from the NW and the corresponding total transverse energy flow () points away from the NW and opposite to the incident beam . On the other hand, polarized beam aids the interaction of the transverse energy flow with the nanowire and leads to generation of evanescent near-field at nanowire edges, apparent with the presence of scattered light signal in the super-critical region of FP in Figure 3(c). Consequently, the scattered field flow is along the same direction as that of the incident beam. Thus, a nanowire through its scattering can detect OAM modes as well as its linear polarization states. The effect is qualitatively similar to a nanoscopic strip scatterer. [24, 27]
Nanowire as a sensor for OAM and SAM state
Next, we investigate the FP intensity distribution for and polarized beam to determine OAM and SAM state of the beam. Figure 4(a) and (b) shows the FP intensity distribution for and beam respectively. We analyze the pattern by dividing the FP into four parts and looking into the intensity distribution of either upper ( region) or lower half ( region). Additionally, the SAM and OAM signature can be obtained by analysing the signal in the sub-critical and super-critical region intensity distribution respectively. Figure 4(c) and (d) shows the intensity distribution profile within the sub-critical region of the part in the FP, for and polarized beam respectively. The preference of the scattering is opposite for polarized beam scattering with respect to that of beam data as indicated by the black arrows. The preference is the result of spin flow. Since the dominant contribution to the spin flow occurs due to the inner circular part of the beam as shown in figure 2, the preference follows the same handedness. The super-critical region intensity distribution profile in the half for both and polarized beam exhibit similar preference as shown in Figure 4(e) and (f). This preference as well as the number of lobes indicates the OAM state of the incident beam. [42]

Figure 4. Experimentally measured scattered FP intensity distribution of (a) polarized and (b) polarized beam. The corresponding intensity distribution profile in the sub-critical region of the part of the FP for and polarized beam is shown in (c) and (d) respectively. The same for super-critical region is shown in (e) and (f). The black arrows indicate the effective directionality.
The intensity distributions can be further quantified by calculating the directionality, , where represents the integrated intensity of lobe for sub- or super-critical region. From the experimentally measured data in figure 4 (c) and (d) we find, for beam and for beam in the sub-critical region. Thus, for polarization case and for polarized beam, i.e., sign of the directionality in the sub-critical region inverts depending upon the spin flow direction and hence the SAM state. On the other hand, the preferential scattering in the super-critical region of the FP indicates the sense of orbital flow and hence the OAM state: for polarized and for polarized beam, i.e., directionality sign () remains the same. Hence, and indicates beam excitation and and indicates beam excitation. Although the differential sensing of the orbital and spin flow is achieved, the total transverse energy flow influences the effective directionality magnitude in the super-critical region to some extent.
The measured directionality for the super-critical region is significantly lower for LG_{0}^{1}$ beam than for LG_{0}^{1}$ beam, which is due to the higher total transverse energy flow density for polarized beam, as shown in Figure 2. For sub-critical region the change is much smaller due lower directionality value as well as positional sensitivity. The directionality values will be exactly opposite in sign when we consider the lower half ( region) of the scattered FP intensity distribution as the intensity pattern for region is anti-symmetric with respect to region (Supplementary information S5).
The detection mechanism is robust with respect to the inversion of the orbital flow. We prove this by investigating the scattered FP intensity distribution for polarized and polarized beam as shown in Figure 5(a) and (b) respectively. The corresponding intensity distribution profile in sub critical region of the the half for the and polarized case is shown in Figure 5 (c) and (d) respectively. The measured directionality is found to be for and for polarized beam. The preference of scattering in this region is same as that of the and polarized beam, indicating the same SAM sign. Whereas, for the super-critical region, the intensity distribution profile shown in Figure 5 (e) () and (f) (), the preference is opposite to that of the case, indicating the sign inversion of the topological charge and hence the orbital as well as total transverse energy flow of the beam. Therefore, owing to the polarization and transverse energy flow dependent interaction of the AgNW with the incident beam, we are able to unambiguously detect OAM and SAM of the incident beam. The accuracy of the simultaneous detection of the SAM and OAM state depends upon the width of the nanowire used for the scattering process. We have performed the experiments for nanowires having width nm, and the results have been elaborated in supplementary information S6. In general, the directionality in the sub- and super-critical region depends upon the incident polarization state of the beam. For beam, the elliptical polarization dependence of the directionality and the reconstruction of elliptical polarization states are investigated in supplementary information S7.

Figure 5. Experimentally measured scattered FP intensity distribution (a) and (b) LG_{0}^{-1} beam. The corresponding intensity distribution profile in the sub-critical region of the part of the FP for and polarized LG_{0}^{-1} beam is shown in (c) and (d) respectively. The same for super-critical region is shown in (e) and (f). The black arrows indicate the effective directionality.
Detection of OAM and SAM for higher order LG beam
Next, we explore the possibility of simultaneous detection of higher order OAM as well as SAM and investigate the FP intensity distribution for higher order LG beam: beam. Figure 6(a) and (b) shows the FP intensity distribution for and polarized beam respectively. Here we observe 3 lobes, instead of 2 like in the case of beam, indicating the magnitude of the topological charge ( lobes for beam).[42] The corresponding intensity distribution in the sub-critical region of the half is shown in Figure 6 (c) and (d). The same for the super-critical region is shown in Figure 6(e) and (f). From both figure 6(c) and (d) it can be seen that the central lobe remains of almost same intensity for and polarized case, whereas the gray-shaded right-most (numbered 1) and left-most (numbered 3) lobes undergo intensity change. Thus we consider the integrated intensity of these two lobes only (1: NA 0.5 to 0.25 and 2: NA −0.25 to −0.5). The directionality values for the sub-critical region intensity distribution in figure 6 (c) and (d) are and respectively. As before, the sign inversion of directionality allows us to accurately detect the SAM sign and the signs are same as in the case of beam. On the other hand, the directionality for the super-critical region, for polarized and for polarized case indicates the OAM sign.

Figure 6. Experimentally measured scattered FP intensity distribution of (a) polarized and (b) polarized beam. The corresponding intensity distribution profile in the sub-critical region of the part of the FP for and polarized beam is shown in (c) and (d) respectively. The same for super-critical region is shown in (e) and (f). The black arrows indicate the effective directionality.
It is important to notice that the directionality values we get in the sub-critical region for polarized beam is lower for beam than that of beam. This is because, as the topological charge magnitude of LG beam increases, the magnitude of the orbital flow increases (supplementary information S8), and dominates the total energy flow and hence it will be more difficult to distinguish the effect of the spin flow. Additionally, presence of lobes for large for beam scattering[42] in a small scattered width ( to ) in the FP intensity distribution, will make it harder for us to detect the fluctuation in the polarization dependent magnitude of the lobes.
Conclusion
To summarize, we have experimentally shown how forward scattering from a single AgNW can be used for simultaneous unambiguous sensing of spin and orbital angular momentum by employing Fourier plane microscopy. By analyzing the intensity lobes due to circularly polarized LG beam in the sub- and super-critical region in the Fourier plane, we show that the preference of scattering in the sub-critical region changes when the spin is inverted, whereas the super-critical region intensity distribution preference depends predominantly on the orbital energy flow of the incident beam, thus allowing us unambiguous detection of both. The incident linear polarization dependent behaviour of the AgNW of scattering within the sub-critical region or both sub- and super-critical region in the FP, allows the detection mechanism. The focal optical field calculation gives us more insight onto the scattering mechanism as well as the resulting directionality. Thus, our work emphasizes spin-orbit interaction based simple single element chip-scale detection configuration with prominent spin and orbital angular momentum detection capability. Additionally, the spin-orbit interaction dependant scattering may lead to opportunities in harnessing the resulting optical forces for optical manipulation at nano scale as well as furthering our understanding of spin-orbit interaction.
Acknowledgements
This work was partially funded by Air Force Research Laboratory grant (FA2386-18-1-4118 R&D 18IOA118), DST Energy Science grant (SR/NM/TP-13/2016) and Swarnajayanti fellowship grant (DST/SJF/PSA-02/2017-18). DP and DKS acknowledges Sunny Tiwari, Rahul Chand, Vandana Sharma, Shailendra K. Chaubey and Chetna Taneja for fruitful discussions.
Supplementary information: Simultaneous detection of spin and orbital angular momentum of light through scattering from a single silver nanowire
Diptabrata Paul; Deepak K Sharma; G V Pavan Kumar
Field Calculation for Focused Beams
The fields are calculated employing Debye-Wolf integral representation [1, 2] and closely follows [3]. When an paraxial light beam with electric field and wave vector passing through medium of refractive index is incident on an objective lens of numerical aperture, and having focal length , then the complex field distribution at the focal plane can be obtained by,
The formulation takes into account both the refraction of the paraxial beam at the spherical lens surface (reference sphere) given by and the non-paraxial effects there after. and are the transmission coefficients corresponding to s and p polarized electric fields respectively. and represents the unit vectors of a cylindrical coordinate system whereas the unit vectors of a spherical polar coordinate are given by and .

Figure S1. Theoretically calculated focal electric field intensity distributions and corresponding phase profiles of (a) left-circularly polarized () and (b) right-circularly polarized () beam. The field corresponding to polarization has phase singularity where as the doesn’t possess phase singularity, indicating spin-to-orbit conversion.
Experimental Configuration
The forward scattering measurements is performed using a home-built dual-channel Fourier microscope. A 50× 0.5 NA objective lens (Olympus) was used to focus the incident light on a silver nanowire drop-casted glass coverslip placed on a piezo stage (PI P-733.3CD XY Piezo Nanopositioner). The scattered light has been collected using 100× 1.49 NA lens and projected to the CCD (Thorlabs) using relay optics. A spatial light modulator (Holoeye LC-R 2500 SLM) with off axis blazed hologram has been used to modulate the phase of the 632.8 nm Gaussian beam to produce LG beams of different order (, topological charge ). The first order diffracted beam was filtered through a pin hole and routed towards the microscope objective lens.

Figure S2. Detailed optical setup for forward-scattering measurements. M1-M6 are mirrors; HWP: Half-wave plate; QWP: Quarter-wave plate; BS1: Beam-splitter. A 50 × 0.5 NA objective lens focuses the incident Gaussian/ beam produced through spatial light modulator (SLM) onto the sample, placed on a piezo stage. The scattered light is collected through 100 × 1.49 NA objective lens and the back-focal plane projected onto the CCD using relay optics for Fourier plane imaging. The setup is same as used in our previous reports [4, 5]
Analyzed Fourier Plane for Excitation

Figure S3. Experimentally measured FP intensity distribution for beam and their polarization analysis. (a) FP due to polarized beam. (b) and (c) analyzed along and respectively indicate almost all the scattered light is polarized. (d) FP due to polarized beam. (e) and (f) analyzed along and respectively indicate the light is predominantly polarized. (g) FP due to beam. (g) and (h) indicate polarization analyzed along and respectively.
Numerical Simulation Details
We have employed finite element method simulation based on commercial COMSOL 5.5 software with wave-optics module to perform numerical simulations. AgNW have been modelled using a pentagonal cross-sectional geometry of length , with refractive index set to Ag at 633 nm wavelength, placed on a cuboid geometry set to mimic glass substrate. The LG beam is set to incident through a port of and the beam waist was kept at 633 nm to mimic the focusing conditions. Appropriate scattering boundary conditions were applied to avoid spurious reflections from the boundaries of the simulation box.

Figure S4. The numerical simulation geometry.
REGION ANALYSIS OF AND POLARIZED BEAM

Figure S5. Experimentally measured scattered FP intensity distribution of (a) polarized and (b) polarized beam. The corresponding intensity distribution profile in the sub-critical region of the part of FP for and polarized beam is shown in (c) and (d) respectively. The same for super-critical region is shown in (e) and (f). The black arrows indicate the effective directionality. In the sub-critical region (c) for and (d) for polarized beam. In the super-critical region (e) for and (f) for polarized beam
Directionality dependence on the nanowire size
By comparing Figure S6 and (b) the differences in the scattering pattern due different width of the nanowire can be readily seen. For polarized LG beam, scattering from nm NW leads to significant signal in the super-critical region compared to nm NW. As a result, the directionality values in the sub- and super-critical region in the FP for wire differ from the nm case, as shown in Figure S6-(e). For the thinner nanowires, both the magnitudes of and for and polarized incident beam is small compared to the nm wire, rendering measurement of OAM mode with nm more accurate. For or polarized LG beam, both nm and nm wires detect the polarization state through the inversion of the sign, although with relatively lesser magnitude. But, for thinner nanowires may take opposite sign for LG beam, giving us incorrect reading of the OAM mode. This can be attributed to the fact that for nm wires, there is significant signal in the super-critical region of FP for polarized beam.

Figure S6. Size dependence of scattering pattern for nanowire of width (a) nm and (b) nm. Nanowire micrographs are shown below the corresponding row. (c) Directionality values in the sub- () and super-critical region () for region of FP for and polarized LG beam, (d) for and polarized LG beam. (e) for part of FP for and polarized LG beam.
Elliptical Polarization Dependence on the Directionality
We have investigated the polarization dependence of the directionality in the sub- () and super-critical () region of region of the FP by changing the incident polarization through a half-wave plate (HWP) followed by a quarter-wave plate (QWP). In addition, we have also investigated the elliptical polarization dependence of the intensity in the super-critical region () of part of the FP. The linear polarization angle (LP) due to the HWP is represented as and QWP angle is represented by , and are measured with respect to nanowire long axis ( axis) as shown in Figure S7.

Figure S7. Polarization dependent directionality for LG beam. (a) The linear polarization (LP) angle () and quarter-wave plate (QWP) angle () is defined with respect to nanowire long axis. Measured directionality in the (b) sub-critical region (c) super-critical region of the FP. (d) Integrated intensity in the super-critical region. The and states used in our experiments are indicated by black arrows and show inversion of sign for and states, whereas the sign of remains the same, effectively reading out the SAM and OAM states.
Simultaneous measurement of spin and orbital angular momentum states are possible due to the reference set by the orbital energy flow, the readout of which is performed by measurement of the directionality in the super critical region of the FP. The SAM states can then be measured by comparing the directionality in the sub-critical region of the FP, which is dominantly due to the contribution of spin energy flow of circularly polarized beams.
However, it is not possible to reconstruct elliptically polarized states with the method presented here. For elliptically polarized beams, no such reference can be established based on just the directionality measurements as the directionality magnitudes in both the sub- and super-critical region depends on the polarization states as well as transverse energy flow. However, with the data presented in Figure S7–(Figure S7) for , and respectively, the following observations can be made:
The LCP () and RCP () state used in our experiments, indicated by black arrows in Figure S7, show inversion of values from to case, whereas remains the same, effectively reading out SAM and OAM states. The determination is performed by comparing the sign of directionality in the sub- and super-critical region.
To determine linear polarization states, the magnitude of the directionality also has to be considered in addition to its sign. For example, if and , the state can be either determined as polarized beam, or it can be polarized beam. To further distinguish between these two cases, the integrated intensity in the super-critical region () of the region has to be considered. A low indicates polarized beam and high indicates polarized beam. Thus, this distinction can be made by considering the parameters: , and .
For other cases, it is not possible to determine and reconstruct the elliptical polarization states accurately by considering the above parameters (, and ).
However, by studying elliptical polarization dependence of , and , the elliptical polarization states can be reconstructed if either or is known. The accuracy of the elliptical polarization measurement in such cases will be subject to standardization of the directionality values, which can vary depending on the NW width and incident beam profile.
Transverse energy flow of beams from to

Figure S8. Theoretically calculated normalized transverse flow density at the focal plane of 0.5 NA lens for polarized beam from to exhibiting incremental OFD. The normalization is with respect to maximum of total Poynting vector magnitude.
References
- [1]Allen, L.; Beijersbergen, M. W.; Spreeuw, R. J. C.; Woerdman, J. P. Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes. Phys. Rev. A 1992, 45, 8185–8189.
- [2]Molina-Terriza, G.; Torres, J. P.; Torner, L. Twisted photons. Nature Physics 2007, 3, 305–310.
- [3]Franke-Arnold, S.; Allen, L.; Padgett, M. Advances in optical angular momentum. Laser & Photonics Reviews 2008, 2, 299–313.
- [4]Yao, A. M.; Padgett, M. J. Orbital angular momentum: origins, behavior and applications. Adv. Opt. Photon. 2011, 3, 161–204.DOI
- [5]Shen, Y.; Wang, X.; Xie, Z.; Min, C.; Fu, X.; Liu, Q.; Gong, M.; Yuan, X. Optical vortices 30 years on: OAM manipulation from topological charge to multiple singularities. Light: Science & Applications 2019, 8, 90.DOI
- [6]Bekshaev, A.; Bliokh, K. Y.; Soskin, M. Internal flows and energy circulation in light beams. Journal of Optics 2011, 13, 053001.DOI
- [7]Bliokh, K. Y.; Alonso, M. A.; Ostrovskaya, E. A.; Aiello, A. Angular momenta and spin-orbit interaction of nonparaxial light in free space. Phys. Rev. A 2010, 82, 063825.
- [8]Cardano, F.; Marrucci, L. Spin–orbit photonics. Nature Photonics 2015, 9, 776–778.DOI
- [9]Aiello, A.; Banzer, P.; Neugebauer, M.; Leuchs, G. From transverse angular momentum to photonic wheels. Nature Photonics 2015, 9, 789–795.DOI
- [10]Bliokh, K. Y.; Rodríguez-Fortuño, F. J.; Nori, F.; Zayats, A. V. Spin–orbit interactions of light. Nature Photonics 2015, 9, 796–808.DOI
- [11]Neugebauer, M.; Nechayev, S.; Vorndran, M.; Leuchs, G.; Banzer, P. Weak Measurement Enhanced Spin Hall Effect of Light for Particle Displacement Sensing. Nano Letters 2019, 19, 422–425.DOI
- [12]Zhao, Y.; Edgar, J. S.; Jeffries, G. D. M.; McGloin, D.; Chiu, D. T. Spin-to-Orbital Angular Momentum Conversion in a Strongly Focused Optical Beam. Phys. Rev. Lett. 2007, 99, 073901.pubmed.ncbi.nlm.nih.gov/17930896
- [13]Nechayev, S.; Eismann, J. S.; Leuchs, G.; Banzer, P. Orbital-to-spin angular momentum conversion employing local helicity. Phys. Rev. B 2019, 99, 075155.DOI
- [14]Zhao, Y.; Shapiro, D.; Mcgloin, D.; Chiu, D. T.; Marchesini, S. Direct observation of the transfer of orbital angular momentum to metal particles from a focused circularly polarized Gaussian beam. Opt. Express 2009, 17, 23316–23322.DOI
- [15]Rodríguez-Herrera, O. G.; Lara, D.; Bliokh, K. Y.; Ostrovskaya, E. A.; Dainty, C. Optical Nanoprobing via Spin-Orbit Interaction of Light. Phys. Rev. Lett. 2010, 104, 253601.
- [16]Wang, J.; Yang, J.-Y.; Fazal, I. M.; Ahmed, N.; Yan, Y.; Huang, H.; Ren, Y.; Yue, Y.; Dolinar, S.; Tur, M.; Willner, A. E. Terabit free-space data transmission employing orbital angular momentum multiplexing. Nature Photonics 2012, 6, 488–496.DOI
- [17]Willner, A. E. et al. Optical communications using orbital angular momentum beams. Adv. Opt. Photon. 2015, 7, 66–106.DOI
- [18]Lei, T.; Zhang, M.; Li, Y.; Jia, P.; Liu, G. N.; Xu, X.; Li, Z.; Min, C.; Lin, J.; Yu, C.; Niu, H.; Yuan, X. Massive individual orbital angular momentum channels for multiplexing enabled by Dammann gratings. Light: Science & Applications 2015, 4, e257–e257.
- [19]Xie, Z.; Lei, T.; Li, F.; Qiu, H.; Zhang, Z.; Wang, H.; Min, C.; Du, L.; Li, Z.; Yuan, X. Ultra-broadband on-chip twisted light emitter for optical communications. Light: Science & Applications 2018, 7, 18001–18001.DOI
- [20]Mair, A.; Vaziri, A.; Weihs, G.; Zeilinger, A. Entanglement of the orbital angular momentum states of photons. Nature 2001, 412, 313–316.pubmed.ncbi.nlm.nih.gov/11460157
- [21]Padgett, M.; Arlt, J.; Simpson, N.; Allen, L. An experiment to observe the intensity and phase structure of Laguerre–Gaussian laser modes. American Journal of Physics 1996, 64, 77–82.
- [22]Leach, J.; Padgett, M. J.; Barnett, S. M.; Franke-Arnold, S.; Courtial, J. Measuring the Orbital Angular Momentum of a Single Photon. Phys. Rev. Lett. 2002, 88, 257901.
- [23]Leach, J.; Courtial, J.; Skeldon, K.; Barnett, S. M.; Franke-Arnold, S.; Padgett, M. J. Interferometric Methods to Measure Orbital and Spin, or the Total Angular Momentum of a Single Photon. Phys. Rev. Lett. 2004, 92, 013601.pubmed.ncbi.nlm.nih.gov/14753990
- [24]Felde, C. V. Diffraction diagnostics of phase singularities at optical beams. Sixth International Conference on Correlation Optics. 2004; pp 67 – 76.DOI
- [25]Jack, B.; Padgett, M. J.; Franke-Arnold, S. Angular diffraction. New Journal of Physics 2008, 10, 103013.
- [26]de Araujo, L. E. E.; Anderson, M. E. Measuring vortex charge with a triangular aperture. Opt. Lett. 2011, 36, 787–789.
- [27]Bekshaev, A.; Mikhaylovskaya, L.; Patil, S.; Kumar, V.; Singh, R. P. Optical-vortex diagnostics via Fraunhofer slit diffraction with controllable wavefront curvature. J. Opt. Soc. Am. A 2020, 37, 780–786.DOI
- [28]Pu, M. et al. Catenary optics for achromatic generation of perfect optical angular momentum. Science Advances 2015, 1, e1500396.DOI
- [29]Guo, Y.; Pu, M.; Zhao, Z.; Wang, Y.; Jin, J.; Gao, P.; Li, X.; Ma, X.; Luo, X. Merging Geometric Phase and Plasmon Retardation Phase in Continuously Shaped Metasurfaces for Arbitrary Orbital Angular Momentum Generation. ACS Photonics 2016, 3, 2022–2029.DOI
- [30]Genevet, P.; Lin, J.; Kats, M. A.; Capasso, F. Holographic detection of the orbital angular momentum of light with plasmonic photodiodes. Nature Communications 2012, 3, 1278.DOI
- [31]Chen, J.; Chen, X.; Li, T.; Zhu, S. On-Chip Detection of Orbital Angular Momentum Beam by Plasmonic Nanogratings. Laser & Photonics Reviews 2018, 12, 1700331.DOI
- [32]Zhang, S.; Huo, P.; Zhu, W.; Zhang, C.; Chen, P.; Liu, M.; Chen, L.; Lezec, H. J.; Agrawal, A.; Lu, Y.; Xu, T. Broadband Detection of Multiple Spin and Orbital Angular Momenta via Dielectric Metasurface. Laser & Photonics Reviews 2020, 14, 2000062.DOI
- [33]Sun, Y.; Yin, Y.; Mayers, B. T.; Herricks, T.; Xia, Y. Uniform Silver Nanowires Synthesis by Reducing AgNO3 with Ethylene Glycol in the Presence of Seeds and Poly(Vinyl Pyrrolidone). Chemistry of Materials 2002, 14, 4736–4745.DOI
- [34]Visaveliya, N.; Köhler, J. M. A self-seeding synthesis of Ag microrods of tuned aspect ratio: ascorbic acid plays a key role. Nanotechnology 2013, 24, 345604.pubmed.ncbi.nlm.nih.gov/23912565
- [35]Yang, H.; Qiu, M.; Li, Q. Identification and control of multiple leaky plasmon modes in silver nanowires. Laser & Photonics Reviews 2016, 10, 278–286.DOI
- [36]Taneja, C.; Paul, D.; Pavan Kumar, G. V. Publisher’s Note: “Experimental observation of transverse spin of plasmon polaritons in a single crystalline silver nanowire” [Appl. Phys. Lett. 119, 161108 (2021)]. Applied Physics Letters 2021, 119, 219901.DOI
- [37]Vasista, A. B.; Jog, H.; Heilpern, T.; Sykes, M. E.; Tiwari, S.; Sharma, D. K.; Chaubey, S. K.; Wiederrecht, G. P.; Gray, S. K.; Kumar, G. V. P. Differential Wavevector Distribution of Surface-Enhanced Raman Scattering and Fluorescence in a Film-Coupled Plasmonic Nanowire Cavity. Nano Letters 2018, 18, 650–655, PMID: 29244518.DOI
- [38]Tiwari, S.; Taneja, C.; Sharma, V.; Vasista, A. B.; Paul, D.; Pavan Kumar, G. V. Dielectric Microsphere Coupled to a Plasmonic Nanowire: A Self-Assembled Hybrid Optical Antenna. Advanced Optical Materials 2020, 8, 1901672.arxiv.org/abs/1910.01878
- [39]Wei, H.; Wang, Z.; Tian, X.; Käll, M.; Xu, H. Cascaded logic gates in nanophotonic plasmon networks. Nature Communications 2011, 2, 387.DOI
- [40]Lopez-Diaz, D.; Merino, C.; Velázquez, M. M. Modulating the Optoelectronic Properties of Silver Nanowires Films: Effect of Capping Agent and Deposition Technique. Materials 2015, 8, 7622–7633.DOI
- [41]Sharma, D. K.; Kumar, V.; Vasista, A. B.; Chaubey, S. K.; Kumar, G. V. P. Spin-Hall effect in the scattering of structured light from plasmonic nanowire. Opt. Lett. 2018, 43, 2474–2477.DOI
- [42]Sharma, D. K.; Kumar, V.; Vasista, A. B.; Paul, D.; Chaubey, S. K.; Kumar, G. V. P. Optical Orbital Angular Momentum Read-Out Using a Self-Assembled Plasmonic Nanowire. ACS Photonics 2019, 6, 148–153.DOI
- [43]Paul, D.; Sharma, D. K.; Kumar, G. V. P. Focused linearly-polarized-light scattering from a silver nanowire: Experimental characterization of the optical spin-Hall effect. Phys. Rev. A 2021, 103, 013520.DOI
- [44]Wolf, E.; Gabor, D. Electromagnetic diffraction in optical systems - I. An integral representation of the image field. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences 1959, 253, 349–357.DOI
- [45]Richards, B.; Wolf, E.; Gabor, D. Electromagnetic diffraction in optical systems, II. Structure of the image field in an aplanatic system. Proceedings of the Royal Society of London, Series A. Mathematical and Physical Sciences 1959, 253, 358–379.DOI
- [46]Novotny, L.; Hecht, B. Principles of Nano-Optics; Cambridge University Press, 2006.DOI
- [47]Kerber, R. M.; Fitzgerald, J. M.; Reiter, D. E.; Oh, S. S.; Hess, O. Reading the Orbital Angular Momentum of Light Using Plasmonic Nanoantennas. ACS Photonics 2017, 4, 891–896.DOI
- [48]Kurvits, J. A.; Jiang, M.; Zia, R. Comparative analysis of imaging configurations and objectives for Fourier microscopy. J. Opt. Soc. Am. A 2015, 32, 2082–2092.DOI
- [49]Vasista, A. B.; Sharma, D. K.; Kumar, G. P. digital Encyclopedia of Applied Physics; American Cancer Society, 2019; pp 1–14.