In this paper
AbstractIntroductionThe ResultThe Lieb-Sokal theoremThe statementThe proofThe Blume-Emery-Griffiths ModelReferencesWorksPhysics and Astronomy
The Lee-Yang property of the Blume-Emery-Griffiths model
Abstract
The Lieb-Sokal theorem provides a tool for establishing the Lee-Yang property of the partition function of a spin model if the corresponding single-spin partition function has this property and the interaction term in its Hamiltonian is of the form with . According to the result of this paper, the spin model with the Hamiltonian has the Lee-Yang property for all and , whenever each exceeds an explicitly computed bound , such that as . The latter suggests that the Lee-Yang property of this model may hold only for sufficiently low temperatures.
Introduction
The celebrated Lee-Yang theorem states that the continuation to complex values of the external magnetic field of the partition function of the collection of interacting Ising spins has purely imaginary zeros if the interaction is ferromagnetic; see [3, 11, 14, 15] and the literature quoted therein. As a Laurent polynomial in ( being the inverse temperature), symmetric with respect to the change , is an even exponential-type entire function. Combining these facts, cf. [10], one readily concludes that it can be written in the form
where the collection – in this case, - and -dependent parameters – satisfies
Consequently, is said to have the Lee-Yang property. With increasing , the ‘first Lee-Yang zero’ moves towards the origin; see [7]. In the limit , it may reach the origin and thus produce a singularity of the free energy density at . In view of this, the Lee-Yang theorem contributes to the collection of powerful methods for studying phase transitions in Ising and similar spin models.
Obviously, (1.1) holds for , where . A natural generalization of the Lee-Yang theorem might be to claim the validity of (1.1) and (1.2) in the case of more general single-spin distributions that possess the Lee-Yang property, including those for ‘unbounded’ spins, which are finite measures on the real line. Newman [14], and then Lieb and Sokal [11], did this. The key aspect of the latter work is the following
@references nggun representation
where is related to the aforementioned finite measure by
The infinite-order differential operator in the last line of (3) can be defined for all if is an entire function of order less than two, or of order two and of minimal type. The Lee-Yang property of means that can be written in the form
where the collection satisfies (2), and hence is a Laguerre entire function; see [2, 6] and also [8], where examples of single-spin measures possessing the Lee-Yang property are given.
According to [11], given in (3) has the Lee-Yang property for all whenever for all , and is as in (5). The latter is a sufficient condition; it leaves open the possibility that has the Lee-Yang property for , at least for some , even if this condition is not satisfied. In [9], such a possibility was shown to occur for the Blume-Capel model. Here we extend this result to the Blume-Emery-Griffiths (BEG) model; see [1, 5, 12, 13, 16] for more details on this model, its versions and applications.
The prototypical model that we study corresponds to the following partition function
with
where is Dirac’s measure centered at . This model is related to the BEG model; see the next section. Note that the function corresponding (as in (4)) to given in (7) is
For , it does not vanish on the imaginary axis, where . Then does not satisfy the sufficient condition mentioned above. Another essential obstacle to proving the Lee-Yang property of (6) is the quadrupole interaction term , which is incompatible with the technique of [11] or any other theory of this kind. In this paper, we prove that given in (6) has the Lee-Yang property for all and if the interaction intensities are large enough. To the best of our knowledge, this is the first result of this kind for the Blume-Emery-Griffiths model.
The Result
We begin by preparing the basic tool that we use to prove the main statement.
The Lieb-Sokal theorem
First, we formulate the relevant results of [11] in the form adapted to the context. To do this, we will need stable polynomials. For a given , a complex polynomial, , is said to be stable if whenever for all ; see [2, 15] and the literature quoted in these publications.
Let be the set of exponential-type entire functions defined on , which are: (a) not identically zero; (b) obtained as limits of the sequences of stable polynomials taken in the topology of uniform convergence on compact subsets of . Clearly, the point-wise product is in if both and are there. By Hurwitz’ theorem, it follows that each verifies whenever for all . At the same time, by the Laguerre–Pólya theorem, an even exponential-type entire function that does not vanish at zero is in if and only if it is as in (1.5); see [6 pages 8–23]. If is even, i.e., , and , then is as in (1.5).
For , define
Proposition 2.1. [11 Propositions 2.6 and 2.7, page 161] If for all $1 \le i < j \le N$, then for each , both functions and given in (2.1) are in .
For , by solving , see (1.8), we obtain . Therefore, is an exponential-type entire function of the form (1.5), i.e., . Then is in , and the direct corollary of Proposition 2.1 is the following statement.
Proposition 2.2. [11 Corollary 3.3, page 165] Let in (1.8) correspond to , and for all . Then given in (1.6) has the Lee–Yang property.
As mentioned above, we prove that has the Lee–Yang property for all and whenever each positive is greater than some explicit bound defined by and with the same .
The statement
We begin by introducing the following functions
Note that and . Next, we set
Now for as in (7), we define
where the interaction matrices and are the same as in (6). The next statement is the main result of this work.
Theorem 2.3. given in (12) is in , and thus the partition function , has the Lee-Yang property if the following holds:
(a) For : for each pair .
(b) For : , and there exists a division, , into disjoint two-element subsets (dimers) such that for each pair . Here and are as in (10) and (11), and if for some , and otherwise.
Note that in items (a) and (b) of Theorem 2.3, each can be positive or negative. This theorem describes also the Blume-Capel model, studied in [9]. It corresponds to , i.e., ; see (11). The condition imposed in item (b) is not burdensome. In applications, it suffices to establish the Lee-Yang property of the partition function only for even . The assumed positivity of means that the graph on with the edge set is perfectly matchable (or admits ‘dimer covering’ in the terminology of [4]). The latter property is typical for models defined on graphs, such as , with sufficiently strong nearest-neighbor pair interactions. Similar conditions were imposed in [9], where they are discussed in more detail.
The proof
As was already mentioned, an obstacle for us in proving the Lee-Yang property of is the quadrupole interaction term in the exponent in (12). We begin by deriving useful formulas that will allow us to exclude it.
For a fixed , let us find the smallest such that the following equation
has solutions . Taking into account the two possibilities for , we transform (13) into the following system of equations
with and as unknown quantities. Its solution is
For , the positivity of implies . The least that satisfies this demand, as well as the following one
– since and should be real – corresponds to
In particular, for . For , the condition in (15) takes the form , which also guaranties . The least such corresponds to the equality, which yields
Both versions (16) and (17) can be summarized in the following
see (11). Now we define, cf. (16) and (17),
and for , for . By means of (14), we can write
Then by (12) and (20), we can decompose
According to our assumptions, for all pairs . The same is true for and ; see (19). For , we have . Then the proof of claim (a) of Theorem 2.3 follows by (21) and Proposition 2.1.
In the proof of claim (b), we mostly follow the way elaborated in [9]. Recall that we assume and the existence of the decomposition with the properties mentioned herein. Consequently, we further decompose in the following way
Here
To prove claim (b), we show that even though is not in for ; see (8). To this end, we write
and take into account that
as well as that , see (10). Thereafter, we arrive at the following formula
where
and
For , one sees that , which means that both are in . Consequently,
and hence, see (24),
By (23), if both have this property. Clearly, both and can be approximated by the sequences of stable polynomials and , respectively. Then if
is a stable polynomial for all sufficiently large , i.e., it does not vanish for all , and such . The latter is equivalent to
For , we set
Here for . By (26), it follows that
Assume , which corresponds to the equality in (25), and hence, cf. (26), to the following
Similarly to (27) we then get
By construction, and , point-wise on , . Hence, the right-hand sides of (27) and (28) are both strictly greater than one whenever for some threshold dependent on and . Clearly, this is not possible for any value of . The obtained contradiction implies (25), which completes the proof.
The Blume-Emery-Griffiths Model
The Blume-Emery-Griffiths (BEG) model was introduced in [1] to describe the -transition and phase separation in He3-He4 mixtures. In general form, its Hamiltonian reads as follows
Here, each spin takes values , and are bilinear and biquadratic (quadrupole) interaction intensities, and is a crystal anisotropy field. Typically [1, 5, 16], the spins are indexed by the vertices of a graph, e.g., a crystal , in which case the (nearest-neighbor) interaction intensities and are assigned to the graph edges.
Along with the aforementioned physical systems, this model is used in the theory of many other substances and phenomena; see [5, 16] and the publications quoted therein. It has a variety of significant properties that are essentially different from those of the classical Ising model. The difference is especially spectacular if the quadrupole intensities satisfy for all ; see [5, 12, 16]. Its partition function , cf. (3), can be obtained from that in (6) by the formula , in which the corresponding parameters and those of (29) are related to each other as follows
According to Theorem 2.3, in the case of nearest-neighbor interactions, the partition function of the BEG model (with ) has the Lee-Yang property if the model parameters and satisfy
see (11), (20) and (30). Here, can be positive or negative. For , this condition coincides with the corresponding condition derived in [9]. For and , (31) turns into the following bound, cf. (10) and (11),
where
Therefore, the partition function of the BEG model has the Lee-Yang property for all whenever . For , the condition in (31) takes the form
The latter cannot be satisfied for all since the right-hand side is unbounded on this interval.
In the case , the large behavior of is completely different: by (10) and (11), one sees that . Therefore, instead of (32) one gets the following condition
For , instead of (33) one obtains
which is also unbounded on .
Institut Informatyki i Matematyki, Uniwersytet Marii Curie-Skłodowskiej, plac Marii Curie-Skłodowskiej 1, 20-031 Lublin, Poland; fax +48 81 537 5471
Email address: [email protected]
References
- [1]Blume, M., Emery, V. J., Griffiths, R. B.: Ising model for the λ-transition and phase separation in He3-He4 mixtures, Phys. Rev. A 4, 1071 (1971), https://doi.org/10.1103/PhysRevA.4.1071
- [2]Fisk, S.: Polynomials, roots, and interlacing, arXiv preprint math/0612833 (2006).arxiv.org/abs/math/0612833
- [3]Fröhlich, J., Rodriguez, P.-F.: Some applications of the Lee-Yang theorem, J. Math. Phys. 53, 095218 (2012), https://doi.org/10.1063/1.4749391
- [4]Heilmann, O. J., Lieb, E. H.: Theory of monomer-dimer systems, Commun. Math. Phys. 25, 190–232 (1972), https://doi.org/10.1007/BF01877590
- [5]Hoston, W, Berker, A. N.: Multicritical phase diagrams of the Blume-Emery-Griffiths model with repulsive biquadratic coupling, Phys. Rev. Lett. 67, 1027–1030 (1991), DOI: 10.1103/PhysRevLett.67.1027DOI
- [6]Iliev, L.: Laguerre entire functions, Publishing House of the Bulgarian Academy of Sciences, 1987.
- [7]Jiang, J., Newman, C. M.: Thermodynamic limit of the first Lee-Yang zero, Commun. Pure Appl. Math., 77, 1224–1234 (2024), https://doi.org/10.1002/cpa.22159
- [8]Kozitsky, Y.: Laguerre entire functions and the Lee-Yang property, Appl. Math. Computation, 141, 103–113 (2003), https://doi.org/10.1016/S0096-3003(02)00324-7
- [9]Kozitsky, Y., Holovatch, Y.: Lee-Yang property of the Blume-Capel model, Phys. Rev. E 114, 044107 (2026), https://doi.org/10.1103/7pdz-klhn
- [10]Levin, B. Ya.: Lectures on entire functions. Vol. 150. American Mathematical Soc., 1996.DOI
- [11]Lieb, E.H., Sokal, A.D.: A general Lee-Yang theorem for one-component and multicomponent ferromagnets, Commun. Math. Phys., 80 153–179 (1981), https://doi.org/10.1007/BF01213009
- [12]Lima, P. C.: The BEG model in the disordered region and at the antiquadrupolar-disordered Line of parameters, J. Statist. Phys. 178 265–280 (2020), https://doi.org/10.1007/s10955-019-02431-z
- [13]Lima, P. C., Mariani, R., Procacci, A., Scoppola, B.: The Blume–Emery–Griffiths model on the FAD point and on the AD line, J. Statist. Phys., 190, 170 (2023), https://doi.org/10.1007/s10955-023-03181-9
- [14]Newman, C. M.: Zeros of the partition function for generalized Ising systems, Commun. Pure Appl. Math. 27, 143–159 (1974), https://doi.org/10.1002/cpa.3160270203
- [15]Ruelle, D.: Characterization of the Lee-Yang polynomials, Ann. of Math. 171, 589–603 (2010), https://www.jstor.org/stable/27799213arxiv.org/abs/0811.1327
- [16]Wu, X. N., Wu, F. Y.: Blume-Emery-Griffiths model on the honeycomb lattice, J. Statist. Phys. 50, 41–55 (1988), https://doi.org/10.1007/BF01022986