betaFeedback

WorksPhysics and Astronomy

Analyzing Fermionic Dark Matter scenarios with anomalous compact objects

Abstract

In this paper, we consider three compact objects (HESS J1731-347, PSR J1231-1411, XTE J1814-338) with anomalous mass-radius relation to analyze the possibility of being dark matter admixed neutron stars. We try to infer the dark matter particle properties, under the assumption of behaving as a free Fermi gas. The main novelty relies on the use of a baryonic equation of state obtained from first principles in the whole density range, that allows to eliminate the model dependence of the baryonic part of the calculation. Once the possible Dark Matter Admixed Neutron Star configurations are obtained, we check their stability and whether it is feasible for a Neutron Star to capture the necessary dark matter fraction. We show that two of the anomalous compact objects (HESS J1731-347 and PSR J1231-1411) can be explained with a small fraction of fermionic dark matter content in the star. The other compact object (XTE J1814-338) cannot be explained as a dark matter admixed neutron star, and becomes a potential candidate for a twin star.

Introduction

Detection of Dark Matter (DM) is one of the most important tasks in modern physics. The large-scale structure of the universe and it’s evolution is believed to be greatly influenced by the gravitational effects produced by this type of matter. By now, there is plenty of cosmological evidence for its existence, but because of the weak interactions between baryonic and dark matter particles, searches of both indirect and direct detection have so far been fruitless. This makes constraining the parameter space of DM one of the most important tasks of modern physics. On the other hand, DM might be present in compact objects through capture mechanisms or in a mix with the baryonic matter of the object when was formed. Neutron Stars (NSs) are one of the most compact objects in our Universe, preceded by black holes and followed by white dwarfs. Because of their extreme densities, NS provide conditions to explore new phenomena, making them laboratories of new physics. In particular, the presence of DM inside a NS modifies its properties, giving an opportunity to study different scenarios of DM.

Dark matter in NSs can manifest as a halo extending beyond the baryonic radius, which increase both, the gravitational mass and the tidal deformability; and as a dark matter core inside the star, decreasing both quantities [1, 2, 3, 4]. In any case, having DM bounded to a NS would offer plenty of different possibilities for observables that could give us some insight into the DM component of the star. Among the possible observational signatures are shifts in the merger frequency of gravitational waves, modifications to the X-ray pulse profile, and the impact of self-annihilating DM on the effective temperature, luminosity, and cooling history of the star [5, 6, 7]. Additional potential probes include changes in the kinematic behavior and rotational properties of the neutron star [8]. Moreover DM could theoretically accumulate enough matter in a NS to collapse into a black hole, allowing for black-holes observations to constrain dark matter properties [9, 10, 11].

For this strategy to be successful, it is necessary to have reliable results for the properties of the compact object due to its baryonic content. If the observables used are the mass and radius of the NS, the relevant theoretical input is the equation of state (EoS) of the baryonic matter. Searches for the NS EoS have also been one major mission for physicists for the past decades, and astrophysical measurements could tightly constrain the allowed EoS. In this regard, there are new approaches to calculate the EoS of nuclear matter based on first principles [12]. This reduces the model dependence in the baryonic part of the calculation, and the systematic error in the determination of the DM particle properties.

This progress has immediate applications in new physics searches where the baryonic EoS plays a central role. It allows to rigorously quantify the effect of DM on the properties of the NS and therefore constrain DM models and properties. In this paper we consider three compact objects located in the Milky Way: HESS J1731-347 (R=10.4−0.78+0.86 kmR = 10.4^{+0.86}_{-0.78}\ \mathrm{km}, M=0.77−0.17+0.20 M⊙M = 0.77^{+0.20}_{-0.17}\ M_{\odot}) [13], PSR J1231-1411 (R=9.91−0.86+0.86 kmR = 9.91^{+0.86}_{-0.86}\ \mathrm{km}, M=1.12−0.07+0.07 M⊙M = 1.12^{+0.07}_{-0.07}\ M_{\odot}) [14] and XTE J1814-338 (R=7.0−0.4+1.0 kmR = 7.0^{+1.0}_{-0.4}\ \mathrm{km}, M=1.21−0.05+0.05 M⊙M = 1.21^{+0.05}_{-0.05}\ M_{\odot}) [15]. All these objects show masses and radii that are off of the predicted mass-radius relation obtained with the standard baryonic EoS. These anomalies make them candidates for being baryonic objects mixed with some DM content. This analysis also allows us to constrain the DM parameter space.

The effects of DM on compact objects have been studied in the past for multiple combinations of dark and baryonic equations of state. For the dark matter EoS, there are studies with fermionic dark matter models (Free fermi gas [16, 17]; self-interacting DM [18, 19]; and interacting DM [20]); and bosonic dark matter [16, 21, 22]. Some nuclear EoS used in previous works are non relativistic phenomenological mean-field models [23] (BSk22), and relativistic mean field models [20] (DDME2 parameterization), [24] (DD2 parameterization). In addition to the mentioned EoS, Chiral Effective Theory has also been used in the EoSs describing NSs in the context of DANSs [18],[25, 26, 27, 28, 29].

The paper is organized as follows. In Sec. II we explain the EoSs used for baryonic and dark matter. In Sec.III we show the results obtained for the different scenarios of DM content in the NS for different DM particle masses. Latter, in Sec. IV we analyze the the feasibility of the scenarios that could explain the anomalous COs masses and radii. Finally, in Sec.V we summarize the results and show the conclusions of our analysis.

Methodology

Baryonic Matter EoS

For the baryonic EoS we use the results obtained in Ref. [12]. This calculation uses regulator-independent EFT results for the EoS at low densities and QCD constrains at high densities. In the intermediate region, the EoS is constrained by results for the symmetry energy and it slope at nuclear saturation, that are related to the pressure and energy per particle of neutron matter at that density. Additionally, the equation of state is also constrained by mechanical stability, causality and thermodynamic consistency (see Ref. [30] for more details).

To be specific, we use a set of 14 EoS calculated in the same way as was done in Ref. [12], but without considering the HESS J1731-347 [13] measurement. The EoSs that we use in this work also include the effect of a crust, that has been incorporated in the way that was explained in Ref. [31]. In Figs. 1 and 2 we plot the set of equations of state used in this work.

Logarithmic plot of the baryonic equations of state used in this work

Figure 1. Logarithmic plot of the baryonic equations of state used in this work.

Baryonic equations of state used in this work

Figure 2. Baryonic equations of state used in this work.

The baryonic EoSs used generate the mass-radius diagrams shown in Figure 3.

Mass-radius diagrams generated from the EoSs used in this work

Figure 3. Mass-radius diagrams generated from the EoSs used in this work.

Dark Matter EoS

In this work we want to analyze the DM effects on the mass-radius relation of a NS. The model used for DM is the free Fermi gas model, because it produces larger effects on the mass-radius diagram than the interacting (repulsive) Fermi gas [19].

The EoS of a free Fermi gas can be parametrized in terms of the Fermi momentum (kFk_F) in the following form

ε=12π2∫0kFk2k2+mf2 dk=18π2[kFkF2+mf2(2kF2+mf2)−mf4ln⁡(kF+kF2+mf2mf)](1)\begin{aligned} \varepsilon= \frac{1}{2\pi^{2}}\int_{0}^{k_{F}} k^{2}\sqrt{k^{2}+m_{f}^{2}}\,dk \\ &= \frac{1}{8\pi^{2}}\left[k_{F}\sqrt{k_{F}^{2}+m_{f}^{2}}(2k_{F}^{2}+m_{f}^{2})-m_{f}^{4}\ln\left(\frac{k_{F}+\sqrt{k_{F}^{2}+m_{f}^{2}}}{m_{f}}\right)\right] \tag*{(1)} \end{aligned}
P=16π2∫0kFk4k2+mf2 dk(2)P = \frac{1}{6\pi^{2}}\int_{0}^{k_{F}}\frac{k^{4}}{\sqrt{k^{2}+m_{f}^{2}}}\,dk \tag*{(2)}
=124π2[kFkF2+mf2(2kF2−3mf2)+3mf4ln⁡(kF+kF2+mf2mf)](3)= \frac{1}{24\pi^{2}}\left[k_{F}\sqrt{k_{F}^{2}+m_{f}^{2}}(2k_{F}^{2}-3m_{f}^{2})+3m_{f}^{4}\ln\left(\frac{k_{F}+\sqrt{k_{F}^{2}+m_{f}^{2}}}{m_{f}}\right)\right] \tag*{(3)}

where we can express the Fermi momentum in terms of the number density (nn) kF3=3π2nk_{F}^{3}=3\pi^{2}n so that the only free parameter is the fermion mass mfm_{f}. In this study the fermion mass is simply the proposed DM mass, so mDM≡mfm_{DM}\equiv m_{f}. For a representative range of possible DM candidates we choose six different DM particle masses mf={1,10,102,103,104,105}m_{f}=\{1,10,10^{2},10^{3},10^{4},10^{5}\} MeV. In Figure 4 we show the EoSs used for the DM component. Note that, depending on the DM mass, one needs to cover different ranges in PP and ε\varepsilon to calculate Dark Matter Admixed Neutron Stars (DANS) with masses up to ∼2.7M⊙\sim2.7M_{\odot}.

Dark Matter Equations of State

Figure 4. DM equations of state used in this work.

Hydrostatic equilibrium

In order to study the star formed by the admixture of dark and baryonic matter, we consider the two-fluid formalism for the Tolmann-Oppenheimer-Volkoff (TOV) equations where each component is considered as a perfect fluid [32]. Since the cross-section for non gravitational interactions between dark and baryonic matter has experimentally been found to be very small, it is safe to consider only gravitational interaction between baryonic matter (BM) and DM. Specifically, σχN∼10−45 cm2≪σnucl∼10−24 cm2\sigma_{\chi N}\sim10^{-45}\,\mathrm{cm}^{2}\ll\sigma_{nucl}\sim10^{-24}\,\mathrm{cm}^{2} [33], begin σχN\sigma_{\chi N} the DM-nucleon cross section and σnucl\sigma_{nucl} the nuclear cross section. In this way, each fluid satisfies conservation of the energy-momentum tensor separately, and the hydrostatic equilibrium of the system can be expressed as follows

dPBMdr=−(PBM+εBM)4πr3(PBM+PDM)+M(r)r(r−2M(r))(4)\frac{dP_{BM}}{dr}=-(P_{BM}+\varepsilon_{BM})\frac{4\pi r^{3}(P_{BM}+P_{DM})+M(r)}{r(r-2M(r))} \tag*{(4)}
dPDMdr=−(PDM+εDM)4πr3(PBM+PDM)+M(r)r(r−2M(r))(5)\frac{dP_{DM}}{dr}=-(P_{DM}+\varepsilon_{DM})\frac{4\pi r^{3}(P_{BM}+P_{DM})+M(r)}{r(r-2M(r))} \tag*{(5)}

where rr the radius of the star, PiP_{i} is the pressure of each fluid and εi\varepsilon_{i} its energy density. The total mass of the star and the mass of each component are given by

M(r)=∑iMi(r)dMi(r)dr=4πεi(r)r2(6)M(r)=\sum_{i}M_{i}(r) \qquad \frac{dM_{i}(r)}{dr}=4\pi\varepsilon_{i}(r)r^{2} \tag*{(6)}

where i=BM,DMi=BM,DM. Eqs (4)-(6) need the input of both equations of state to be computed. To solve this system of coupled differential equations we consider that the BM and DM mass inside a sphere of zero radius (center of the star) is zero, MDM(0)=MBM(0)=0M_{DM}(0)=M_{BM}(0)=0, and we provide a set of initial central pressures. For the baryonic component we consider the following range of central pressures PBMc∈(757.5×10−5,757.5) MeV/fm3P^{c}_{BM}\in(757.5\times10^{-5},757.5)\ \mathrm{MeV/fm}^{3}. For the dark matter component we use different ranges, depending on the DM particle’s mass, so that we can reach the desired DM fractions. The whole range of DM central pressures is contained in the range PDMc∈(7.575×10−5,7.575×106) MeV/fm3P^{c}_{DM}\in(7.575\times10^{-5},7.575\times10^{6})\ \mathrm{MeV/fm}^{3}. For each pair of initial pressure conditions, we make use of the fourth order Runge-Kutta method, which solves the coupled equations outwards from the core, to obtain the final radius and mass of the star. Once the pressure of any of the two fluids reaches a value below Pmin⁡∼10−4 MeV/fm3P_{\min}\sim10^{-4}\ \mathrm{MeV/fm}^{3} for a given distance, we consider this distance to be the radius of that component. Then, the calculation continues with only the other component until it reaches a value below Pmin⁡P_{\min} as well. This allows for two possible scenarios for the star: a dark matter core or a dark matter halo expanding beyond the baryonic star.

Stability Analysis

To analyze the (un)stability of the resulting star, we ought to consider that for a dark matter admixed neutron star (DANS), the TOV equations do not yield a single mass radius curve, but instead multiple star configurations, each for one combination of central pressures. Then, one can trace different curves based on different criteria, and curves for a fixed fraction of DM would be different to curves for a fixed ratio of central pressures. Therefore, one cannot use the maximum mass criteria for the onset of instability, as is typically employed for one-fluid configurations. In this work, we follow the analysis presented in [34] which we briefly explain here.

In a two-fluid star, the change between stable and unstable regions occurs when the number of particles for each component remains stationary under variations in any of the energy densities εic\varepsilon_i^c

\begin{pmatrix} \delta N_{BM} \\ \delta N_{DM} \end{pmatrix} = \begin{pmatrix} \partial N_{BM}/\partial\varepsilon_{BM}^c & \partial N_{BM}/\partial\varepsilon_{DM}^c \\ \partial N_{DM}/\partial\varepsilon_{BM}^c & \partial N_{DM}/\partial\varepsilon_{DM}^c \end{pmatrix} \begin{pmatrix} \delta\varepsilon_{BM}^c \\ \delta\varepsilon_{DM}^c \end{pmatrix} = 0 \tag*{(7)}\end{pmatrix}

where NN denotes the number of particles and δ\delta small perturbations. To obtain non-trivial solutions for this equation, it is essential that the determinant of the matrix is zero. In the scenario involving a single fluid, the condition related to the determinant leads to the outcome that ∂N/∂εc=0\partial N/\partial\varepsilon^c = 0. Provided that the TOV equations are satisfied, this condition is equivalent to the established criteria ∂M/∂εc=0\partial M/\partial\varepsilon^c = 0, which signifies the onset of instability. The matrix of Eq. (7) can be diagonalized so that

(δNAδNB)=(κA00κB)(δεAcδεBc)(8)\begin{pmatrix} \delta N_A \\ \delta N_B \end{pmatrix} = \begin{pmatrix} \kappa_A & 0 \\ 0 & \kappa_B \end{pmatrix} \begin{pmatrix} \delta\varepsilon_A^c \\ \delta\varepsilon_B^c \tag*{(8)} \end{pmatrix}

where NAN_A and NBN_B are linear combinations of NDMN_{DM} and NBMN_{BM}. Thus, stable configurations are only permissible when both eigenvalues are positive. For each fluid, it is feasible to compute the number of particles with the TOV equations.

dNidr=4πnir21−2M(r)/r(9)\frac{dN_i}{dr} = \frac{4\pi n_i r^2}{\sqrt{1-2M(r)/r}} \tag*{(9)}

DM content analysis

We want to study what is the minimum DM fraction required to get a star compatible with the compact object observations. In order to do so, we estimate what would be the radius corresponding to a DANS for each of the compact object masses. This estimation is done by using our results for the M-R diagrams for the different DM fractions and DM masses. For a fixed DM fraction, we perform a linear interpolation in the M-R diagram between the immediate higher and lower values in masses with respect to the compact object mass. This allows to obtain a value of the radius (RintR_{\rm int}) at the mass of the compact object.

Once we have the interpolated radius (RintR_{\rm int}), we calculate the χ2\chi^2 according to the formula

χ2=(Robs−Rint)2ΔRobs2(10)\chi^2 = \frac{(R_{\rm obs}-R_{\rm int})^2}{\Delta R_{\rm obs}^2} \tag*{(10)}

where RobsR_{\rm obs} and ΔRobs\Delta R_{\rm obs} are the observed radius of the compact object and it’s error. We calculate the χ2\chi^2 for

each compact object and each M-R diagram (that correspond to a certain DM mass and DM fraction). At the end, we consider the lowest χ2\chi^2 obtained for the set of 14 baryonic EoSs to analyze the results.

Results

Since, depending on the DM mass, the DM component is completely contained in the baryonic radius (core configuration) or extends outside the baryonic radius (halo configuration), it is important to define the Mass and Radius that we will be showing in the M-R diagrams, specially for the results that give rise to halo configurations. The mass and radius measurements of PSR 1231-1411 and HESS J1731-347 were obtained by spectral modeling with XSPEC and those of XTE J1814-338 with the Pulse Profile Modelling technique using X-PSI. In these works, the reported mass and radius of the COs are those that accurately reproduce the measured X-Ray spectra.

For these reasons, in all the following mass-radius figures, the plotted radius is the baryonic one RBMR_{BM}, and the mass is the total mass contained in the baryonic radius MBM(RBM)+MDM(RBM)M_{BM}(R_{BM})+M_{DM}(R_{BM}). On the other hand, the DM fractions are calculated according to this choice, so that the fraction is the DM fraction inside the baryonic radius (F=MDM(RBM)/(MBM(RBM)+MDM(RBM))F=M_{DM}(R_{BM})/(M_{BM}(R_{BM})+M_{DM}(R_{BM}))). In Figure 5 we show the effect that the different DM particle’s mass has on the mass-radius curve for a given nuclear EoS. For mDM≤100 MeVm_{DM} \le100\ \mathrm{MeV} the DM component shows a halo configuration, increasing the total gravitational mass up to 600M⊙600M_\odot (mDM=1 MeVm_{DM}=1\ \mathrm{MeV}), 500M⊙500M_\odot (mDM=10 MeVm_{DM}=10\ \mathrm{MeV}) and 60M⊙60M_\odot (mDM=100 MeVm_{DM}=100\ \mathrm{MeV}). However, in these cases, the DM component inside the baryonic radius corresponds only to fractions of the order of 1%. This contribution is enough to provide significant modifications on the mass-radius diagram of a pure baryonic NS, as we show later.

Mass-radius diagrams for different dark matter fractions and particle masses

Figure 5. In this figure, we show the effect of the different fractions and different DM particle mass on the mass-radius diagram for one of the baryonic EoS.

On the other hand, for mDM≥1m_{DM} \ge1 GeV the DM component shows a core configuration. When mDM=1m_{DM} = 1 GeV it is shown that the higher the fraction of DM in the star is, the bigger is the effect on the M-R diagram. However, for mDM=10m_{DM} = 10 GeV or mDM=100m_{DM} = 100 GeV the DM fractions are so small that the impact of a DM component in the M-R diagram is negligible. The effects of different DM particle’s mass and DM fraction can be seen in Figure 5. In the following subsections we discuss in more detail the effects of a DM component for each DM particle’s mass considered.

mDM = 100 GeV

In Figure 6 we show the results of the stability analysis for mDM=100m_{DM} = 100 GeV and one of the baryonic EoS. In that figure, it is shown the combinations of pressures for the DM (PDMcP_{DM}^{c}) and BM (PBMcP_{BM}^{c}) components, and the resulting total mass for these central pressures. There, only the combinations that give rise to stable configurations are shown. The unstable combinations correspond to the white area. We see that the dependence of the total mass in the central pressures is largely dominated by the baryonic component, until PDMc∼103P_{DM}^{c} \sim10^{3} MeV/fm3^{3}, when the dark matter starts giving visible contributions. For this large DM mass, the configurations resulting from

Stability analysis for mDM = 100 GeV

Figure 6. Results for the stability analysis for mDM=100m_{DM} = 100 GeV. The stable admixed configurations are shown colored. The unstable configurations appear in white. The total gravitational mass is shown as a function of both central pressures.

fractions of the order 1 − 10% are unstable, so we consider in this case fractions of the order of 10−3−10−4%10^{-3} - 10^{-4}\%, which give stable results with a total mass (inside the baryonic radius) in the range of interest. For these small fractions, the DM component has a negligible effect on the M-R curve, as can be seen in Figure 7.

Stable configurations for DM fractions from 0.0001% to 0.0010%

Figure 7. Stable configurations for DM fractions in the range of (10−3−10−410^{-3} - 10^{-4})% with a DM mass of 100 GeV. The black dashed curve corresponds to the rightmost curve of Figure 3 (no DM content), and is shown for comparison purposes.

In Table I we show the minimum value of the χ2\chi^{2} obtained considering all possible combinations of the set of baryonic EoS and different DM fractions for the three compact objects. Since for these small fractions, the modification of the M-R diagram is negligible, the value of the χ2\chi^{2} is the same in all the cases up to the precision shown in this table.

DM %HESS J1731-347PSR-J1231XTE J1814-338
10−4%−10−3%10^{-4}\% - 10^{-3}\%0.843.01126.36

Table I. Minimum χ2\chi^{2} obtained for DM fractions in the range of (10−3−10−410^{-3} - 10^{-4})% with a DM mass of 100 GeV.

The analysis of the DM content in the three compact objects shows that for this DM mass, it is not possible to distinguish a pure baryonic NS from a DANS from the M-R diagram analysis. The small DM fraction needed is not enough to provide significant modifications to the mass and radius of a NS and therefore the agreement with the observed mass and radius of the compact object comes from the baryonic EoS. In this regard, it is interesting to point out that one of the baryonic EoS used in this work agrees already at the 1σ1\sigma level with the mass and radius reported for the HESS J1731-347 compact object. If, in the end, it is a pure baryonic object, the anomalous low mass of this CO can provide strong constraints on the baryonic EoS.

mDM = 10 GeV

For this DM mass the situation is very similar to mDM=100m_{DM} = 100 GeV. In Figure 8 we show the results of the stability analysis for a DM mass of 10 GeV and one of the baryonic EoS. As in Figure 6, only the stable configurations are shown, and the notation is the same. The result for this analysis also shows a dependence of the total mass in the central pressures that is largely dominated by the baryonic component. Configurations of high BM central pressures (PBMc≳103 MeV/fm3P^{c}_{BM} \gtrsim10^{3}\ \mathrm{MeV}/\mathrm{fm}^{3}) are unstable.

Stability analysis for DM mass of 10 GeV

Figure 8. Results for the stability analysis for mDM=10m_{DM} = 10 GeV. The stable admixed configurations are shown colored. The unstable configurations appear in white. The total gravitational mass is shown as a function of both central pressures.

As happened for a DM of 100 GeV, for mDM=10m_{DM} = 10 GeV the configurations for DM fractions of the order 1 − 10% the are unstable. So, in this case, we also consider DM fractions of the order of 10−4−10−3%10^{-4} - 10^{-3}\%.

In Figure 9 we see the resulting M-R diagrams for the different DM fractions considered for this mass. As in the case of mDM=100m_{DM} = 100 GeV these small DM fractions have almost no effect on the M-R curves. In Table II we show the minimum χ2\chi^{2} obtained for each DM fraction for every baryonic EoS and for the three CO. Since the DM component has such a small effect in the cases considered here, the χ2\chi^{2} is the same for every fraction at the precision we show our results.

Stable configurations for DM fractions with a DM mass of 10 GeV

Figure 9. Stable configurations for DM fractions in the range of (10−3−10−410^{-3} - 10^{-4})% with a DM mass of 10 GeV. The black dashed curve corresponds to the rightmost curve of Figure 3 (no DM content), and is shown for comparison purposes.

DM %HESS J1731-347PSR-J1231XTE J1814-338
10−4−10−310^{-4} - 10^{-3} %0.843.01126.36

Table II. Minimum χ2\chi^{2} obtained for DM fractions in the range of (10−3−10−410^{-3} - 10^{-4})% with a DM mass of 10 GeV.

As in the case of a DM mass of 100 GeV, the negligible modification of the M-R diagram provided by the DM component makes impossible to distinguish a pure baryonic NS from a DANS for any of the three CO. For this DM mass we recover the agreement with the the HESS J1731-347 compact object mass and radius found before, whereas for the other two compact objects we also find deviations beyond 1σ1\sigma level.

mDM=1 GeVm_{\mathrm{DM}} = 1\ \mathrm{GeV}

In Figure 10 we show the results of the stability analysis for mDM=1 GeVm_{\mathrm{DM}} = 1\ \mathrm{GeV} and one of the baryonic EoS. Only the combinations that give rise to stable configurations are shown, whereas the unstable combinations correspond to the white area. For this DM mass, the dependence of the total mass in the central pressures is almost entirely given by the baryonic component. Most configurations of either high BM (PBMc≳103 MeV/fm3P_{\mathrm{BM}}^{c} \gtrsim10^{3}\ \mathrm{MeV}/\mathrm{fm}^{3}) or DM (PDMc≳2.5×102 MeV/fm3P_{\mathrm{DM}}^{c} \gtrsim2.5 \times10^{2}\ \mathrm{MeV}/\mathrm{fm}^{3}) central pressures are unstable.

Results for the stability analysis for $m_{\mathrm{DM}} = 1\ \mathrm{GeV}$

Figure 10. Results for the stability analysis for mDM=1 GeVm_{\mathrm{DM}} = 1\ \mathrm{GeV}. The stable admixed configurations are shown colored. The unstable configurations appear in white. The total gravitational mass is shown as a function of both central pressures

For this DM mass, we see visible effects on the MM-RR diagrams for DM fractions of the order of 1%. In this case DM fractions in the range of 1%–10% provide stable results in the mass range of interest for our study. Moving from 1% to 10% only makes unstable the higher mass part of the curve, leaving the stability of most part of the mass range unchanged.

This time, in Figure 11, we see clearly a shift in the MM-RR curves towards lower masses and radii (in Figure 5 it is shown for one EoS). This modification becomes more pronounced for higher DM fractions. Now the HESS J1731-347 measurement is compatible, at the 1σ1\sigma level with the MM-RR curve corresponding to more than just one of the baryonic EoS used. For DM fractions of 2% it becomes compatible with the pink-coloured EoS, from 4% the same measurement becomes compatible with the orange-coloured EoS, from 8% it becomes compatible with the light blue-coloured EoS and from 10% the HESS J1731-347 mass and radius becomes compatible with the results obtained from the dark blue-coloured EoS.

Stable configurations for DM fractions in the range of 1%–10% with a DM mass of 1 GeV

Figure 11. Stable configurations for DM fractions in the range of 1%–10% with a DM mass of 1 GeV. The black dashed curve corresponds to the rightmost curve of Figure 3 (no DM content), and is shown for comparison purposes.

One important novelty with respect to the previous DM scenarios is that, since the DM component has a noticeable effect on the MM-RR diagram, there are configurations where the DANS mass and radius is compatible at 1σ1\sigma level with the PSR-J1231-1411 measurement. In Figure 11 we see that this agreement starts for DM fractions of the order of 9%.

In Table 3 we show all the results for the DM content analysis for a DM mass of 1 GeV. As explained before, the HESS J1731-347 measurement is compatible with all the DM scenarios considered for this mass, while for PSR-J1231 one needs a DM fraction a bit larger than 9% to agree at 1σ1\sigma with its mass and radius. On the other hand, the XTE J1814-338 compact object mass and radius measurement stays far away from any possible DANS scenario considered here.

DM %HESS J1731-347PSR-J1231XTE J1814-338
1 %0.692.74122.44
2 %0.572.52117.64
3 %0.442.30114.24
4 %0.362.04110.47
5 %0.271.81106.47
6 %0.191.58102.73
7 %0.131.3799.02
8 %0.081.1995.31
9 %0.041.0491.43
10 %0.020.8988.16

Table 3. Minimum χ2\chi^2 obtained for DM fractions in the range of (1 − 10)% with a DM mass of 1 GeV.

mDM=100m_{\mathrm{DM}} = 100 MeV

In Figure 12 we show the results of the stability analysis for mDM=100m_{\mathrm{DM}} = 100 MeV and one of the baryonic EoS. Only the combinations that give rise to stable configurations are shown, whereas the unstable combinations correspond to the white area.

Stability analysis for a DM mass of 100 MeV

Figure 12. Results for the stability analysis for mDM=100m_{\mathrm{DM}} = 100 MeV. The stable admixed configurations are shown colored. The unstable configurations appear in white. The total gravitational mass is shown as a function of both central pressures

We see again that at PBMc≳103P^{c}_{BM} \gtrsim10^{3} MeV/fm3^{3} all the configurations for PDMc≲10P^{c}_{DM} \lesssim10 MeV/fm3^{3} become unstable. However, for this DM mass, the DM component shows a halo configuration that rises the total mass of the DANS (considering also the halo mass) up to ∼55 M⊙\sim55\,M_{\odot}. The appearance of this halo has important consequences on the determination of the DANS mass and radius as well as its stability, and requires additional considerations. As explained at the beginning of the section, we choose to define the mass of the DANS as the sum of the baryonic and DM components masses inside the baryonic radius (so that the DM halo mass is not considered), and the DANS radius as the baryonic one. In order to understand the results shown in Figure 14 we show, in Figure 13, the stability analysis with the total mass (including the halo mass), and a new type of figure showing the mass of the stable and unstable configurations for fixed DM fraction as a function of the energy density.

Stability analysis for DM fractions of 1% and 2%

Figure 13. Stability analysis for a DM fraction of 1% (four upper panels) and 2% (four lower panels). The green points shows the stable solutions, while the red points the unstable ones.

Stable configurations for DM fractions from 1% to 10% with a DM mass of 100 MeV

Figure 14. Stable configurations for DM fractions in the range of 1% − 10% with a DM mass of 100 MeV. The black dashed curve corresponds to the rightmost curve of Figure 3 (no DM content), and is shown for comparison purposes.

In that figure we see how the densities that give rise to masses (inside the baryonic radius) below 2.5 M⊙2.5\,M_\odot, correspond to stable configurations for a DM fraction (inside the baryonic radius) of 1%. This situation changes for a DM fraction (inside the baryonic radius) ≥2%\ge2\% where, when the total mass is considered, we see the appearance of unstable configurations around the maximum total mass. When one considers only the mass inside the baryonic radius, these unstable configurations lie in the range of ∼0.25−1.75 M⊙\sim0.25 - 1.75\,M_\odot for a 2% of DM fraction, giving rise to the gap we see in Figure 14. This unstable region widens as the DM fraction grows, reaching the range of ∼0.30−2.25 M⊙\sim0.30 - 2.25\,M_\odot for a 10% of DM fraction. These unstable configurations can be traced back to the DM component of the star, since they appear because a change of sign in ∂NDM/∂εDMc\partial N_{DM}/\partial\varepsilon_{DM}^{c}.

Therefore, for the analysis of these compact objects, only the solutions with a DM fraction of 1% is relevant. For this fraction, the DM contribution is not enough to get solutions in agreement with the PSR-J1231 and XTE J1814-338 measurements at 1σ1\sigma. For HESS J1731-347, the agreement improves, but it was already within the 1σ1\sigma confidence level for one of the baryonic EoS. In Table IV we quantify these results from the χ2\chi^2 analysis for this DM mass.

DM %HESS J1731-347PSR-J1231XTE J1814-338
1 %0.752.83124.60

Table IV. Minimum χ2\chi^2 obtained with a DM mass of 100 MeV. Since the only stable configuration is for a DM fraction of 1%, this is the only result for mDM=100m_{DM}=100 MeV.

agreement improves, but it was already within the 1σ1\sigma confidence level for one of the baryonic EoS. In Table IV we quantify these results from the χ2\chi^2 analysis for this DM mass.

mDM = 10 MeV

In Figure 15 we show the results of the stability analysis for mDM=10m_{DM}=10 MeV and one of the baryonic EoS. Only the stable configurations are shown. Again we see that, at PBMc≳103P_{BM}^{c} \gtrsim10^3 MeV/fm3^3, all the configurations for PDMc≲10P_{DM}^{c} \lesssim10 MeV/fm3^3 become unstable. For this DM mass the halo that appears for DM fractions between 1%−10% becomes more extended so that the total gravitational mass (including halo) is able to reach values up to ∼600 M⊙\sim600\,M_\odot. For this DM mass, the whole curve (up to the maximum mass inside the baryonic radius) is stable only for fractions of 3% or higher. For lower fractions we see that unstable solutions start appearing for the high and low-mass range. In the lower mass region, the transition between the unstable to stable solution is due to the change of sign of ∂NDM/∂εDMc\partial N_{DM}/\partial\varepsilon_{DM}^{c}, while in the high mass region there are changes of signs of both ∂NDM/∂εDMc\partial N_{DM}/\partial\varepsilon_{DM}^{c} and ∂NDM/∂εBMc\partial N_{DM}/\partial\varepsilon_{BM}^{c}.

Results for the stability analysis for mDM = 10 MeV

Figure 15. Results for the stability analysis for mDM=10m_{DM}=10 MeV. The stable admixed configurations are shown colored. The unstable configurations appear in white. The total gravitational mass is shown as a function of both central pressures

In Figure 16 we see the effect of the DM component inside the baryonic radius. The larger is the DM fraction more is reduced the baryonic radius, as we obtained for a DM mass of 1 GeV. However, for this DM mass the effect is not large enough to explain the PSR-J1231 measurement at 1σ1\sigma level for these DM fractions, as happened for 1 GeV, although for a 10% is almost at 1σ1\sigma. For HESS J1731-347, larger DM fractions brings the M-R curves closer to the measurement, while no DM content is able to explain the XTE J1814-338 estimated radius.

Stable configurations for DM fractions from 1% to 10% with a DM mass of 10 MeV

Figure 16. Stable configurations for DM fractions in the range of 1% − 10% with a DM mass of 10 MeV. The black dashed curve corresponds to the rightmost curve of Figure 3 (no DM content), and is shown for comparison purposes.

In Table V we show the DM content analysis of the three compact objects for this DM model.

DM %HESS J1731-347PSR-J1231XTE J1814-338
1 %0.722.78122.61
2 %0.582.50119.07
3 %0.502.31115.14
4 %0.392.08112.07
5 %0.291.88107.84
6 %0.231.71104.82
7 %0.151.49101.88
8 %0.111.3397.60
9 %0.061.1694.80
10 %0.021.0291.72

Table V. Minimum χ2\chi^2 obtained for DM fractions in the range of (1 − 10)% with a DM mass of 10 MeV.

mDM=1m_{\mathrm{DM}} = 1 MeV

In Figure 17 we show the results of the stability analysis for mDM=1m_{\mathrm{DM}} = 1 MeV and one of the baryonic EoS. Only the stable configurations are shown. At PBM≳103P_{\mathrm{BM}} \gtrsim10^3 MeV/fm3^3 all the configurations for PDM≲100P_{\mathrm{DM}} \lesssim100 MeV/fm3^3 become unstable. As for mDM=10m_{\mathrm{DM}} = 10 MeV, for this DM mass the extended DM halo gives rise to total gravitational masses (including halo) up to ∼600 M⊙\sim600\,M_\odot for the DM fractions considered. Also, the configurations for DM fractions of 1% or 2% give unstable solutions in the low and high-mass range. Higher fractions give stable solutions in the whole mass range.

Results for the stability analysis for $m_{\mathrm{DM}} = 1$ MeV

Figure 17. Results for the stability analysis for mDM=1m_{\mathrm{DM}} = 1 MeV. The stable admixed configurations are shown colored. The unstable configurations appear in white. The total gravitational mass is shown as a function of both central pressures

In Figure 18 we see the effect of the DM component inside the baryonic radius. For this DM mass the results are almost exactly the same as before. No DM fraction in the range considered here is able to explain the PSR-J1231 and XTE J1814-338 measurements at 1σ1\sigma confidence level, while the HESS J1731-347 compact object is explained already without DM content.

Stable configurations for DM fractions in the range of 1%–10% with a DM mass of 1 MeV

Figure 18. Stable configurations for DM fractions in the range of 1% − 10% with a DM mass of 1 MeV. The black dashed curve corresponds to the rightmost curve of Fig. 3 (no DM content), and is shown for comparison purposes.

In Table VI we see the analysis of the DM content. The results are the same (up to numerical fluctuations) as we got for a DM mass of 10 MeV.

DM %HESS J1731-347PSR-J1231XTE J1814-338
1 %0.712.77122.62
2 %0.582.50119.07
3 %0.502.31114.93
4 %0.382.08112.08
5 %0.291.88107.86
6 %0.231.72104.87
7 %0.151.49101.35
8 %0.111.3397.62
9 %0.061.1694.82
10 %0.021.0291.74

Table VI. Minimum χ2\chi^2 obtained for DM fractions in the range of (1 − 10)% with a DM mass of 1 MeV.

Dark Matter content in a Neutron Star

Once we calculated the minimum amount of DM needed to explain the CO’s measurements for each DM model, it is necessary to study whether such quantity can be captured during the evolution of a NS. In order to study the possible DM fractions inside these compact objects, we follow Ref. [35]. Even though the progenitor of a NS can accumulate DM during its formation (about 10−11 M⊙10^{-11}\,M_{\odot} [35]), there is no evidence to support this content of DM being bounded to the resulting NS after the supernova explosion. For this reason, in order to be conservative with the amount of DM present in a NS, we will only take into account the DM captured during the NS’s lifetime. When a particle from the Galaxy’s DM halo scatters with the star, it can lose enough kinetic energy to become gravitationally bound. The times that a DM particle crosses the star per unit of time σcr\sigma_{\rm cr} gives an upper bound of the capture rate, which does not depend on the energy loss mechanism. For a NS in a usual Galactic environment, the amount of DM captured is estimated to be around 10−14 M⊙10^{-14}\,M_{\odot}. However, higher environment DM densities or smaller velocities can enhance this amount by a few orders of magnitude.

Nonetheless, there are two factors that often suppress the capture rate. Firstly, not every particle crossing the star gets scattered. The probability of a DM particle scattering with nucleons is governed by the DM-nucleon cross section σχN\sigma_{\chi N}. Secondly, even if the particle gets scattered, if its velocity is large, the energy lost in the collision might not be sufficient for the DM particle to become gravitationally bound. With both factors in mind, the capture rate during the lifetime of the star is:

mF∼2.5×1026 GeV/s(ρDM0.5 GeV/cm3)(220 km/svˉ)f(11)m_F \sim2.5 \times10^{26}\ \mathrm{GeV}/\mathrm{s}\left(\frac{\rho_{DM}}{0.5\ \mathrm{GeV}/\mathrm{cm}^{3}}\right)\left(\frac{220\ \mathrm{km}/\mathrm{s}}{\bar{v}}\right)f \tag*{(11)}

where vˉ\bar{v} the velocity distribution of the DM particles, ρDM\rho_{DM} the DM ambient density, and ff the fraction of particles that scatter among all particles crossing the star:

f=σχN/σcrifσχN<σcr(12)f = \sigma_{\chi N}/\sigma_{cr}\quad\text{if}\quad\sigma_{\chi N}<\sigma_{cr} \tag*{(12)}
f=1otherwise(13)f = 1\quad\text{otherwise} \tag*{(13)}

With small interactions (f=10−10f=10^{-10}), a NS star with a lifetime of 10 Gyr in the Milky Way, the estimated DM mass captured during the lifetime of the star is of the order of 10−23 M⊙10^{-23}\ M_{\odot}. In Figure 19 we show different combinations for the ambient DM density and DM particle’s velocity, and the resulting captured mass, for two different NS age and strength of interactions. It is shown that,

Captured DM by a NS for different combinations of ambient density, velocity, age, and interaction strength

Figure 19. Captured DM by a NS for different combinations of ambient density, velocity, age, and interaction strength. The black dot corresponds to average values for velocity distribution and DM ambient density in the Milky Way.

with conventional capture methods, for the NS to have 0.0005% of its content as DM, the ratio between the velocity distribution and the DM ambient density should be

1010 years, f=10−10:(ρDMvˉ)=1017(ρDMvˉ)∣average10^{10}\ \mathrm{years},\ f=10^{-10}:\quad\left(\frac{\rho_{DM}}{\bar{v}}\right)=10^{17}\left.\left(\frac{\rho_{DM}}{\bar{v}}\right)\right|_{\mathrm{average}}
1015 years, f=10−5:(ρDMvˉ)=106(ρDMvˉ)∣average(14)10^{15}\ \mathrm{years},\ f=10^{-5}:\quad\left(\frac{\rho_{DM}}{\bar{v}}\right)=10^{6}\left.\left(\frac{\rho_{DM}}{\bar{v}}\right)\right|_{\mathrm{average}} \tag*{(14)}

Summary and Conclusions

In this work, we studied the possibility of three COs with anomalous masses and radii to be DANS. For the DM model, we use a relativistic free Fermi gas with different DM masses. Using the two-fluid formalism we studied the Mass-Radius diagram and stability of a DANS for a fixed DM fraction of the total star.

In our analysis, we found two different DANS configurations. The first one is when the DM component stays inside the baryonic radius (core configuration), and emerges when mDM≥1m_{DM} \geq1 GeV. The second one is the halo configuration, where the DM component expands outside the baryonic radius, and appears when mDM≤100m_{DM} \leq100 MeV.

Among all the possible DM masses considered, we saw that a DM mass of the order of 1 GeV is the optimum value to explain the anomalous masses and radii of HESS J1731-347 and PSR J1231-1411, although the HESS J1731-347 mass and radii can be already explained without need of DM at 1σ1\sigma level. In this work, we say that a mass of this order allows the largest stable DM mass content inside the bayonic radius, resulting in the largest reduction of the star radius for a given total mass. On the other hand, the XTE J1814-338 mass and radius cannot be explained from a DM component, and becomes a candidate for twin star [36, 37].

We also investigated the possibility of DANS existing for the range of DM masses and fractions required to account for the observed compact objects. Regarding the PSR J1231-1411 CO, the required fraction to explain its mass and radius is much higher than the mass capture rate estimated for a typical galaxy environment. To be able to reach such fraction, PSR J1231-1411 would need to be in an environment with exceptionally large ambient DM density or slow DM particles. Other works suggest the possibility of a high fraction of DM in compact objects for different reasons. One possible scenario that could explain DM fractions of the order of (1 − 10)% is the presence of DM clumps that could accrete baryonic matter due to free streaming [38]. Another possibility is the presence of a Dark Star companion [39, 40, 41] from where the compact object could accrete enough DM. On the other hand, regarding the HESS J1731-347 CO, although it cannot be used to infer DM properties, its mass and radius can be used to strongly constrain the baryonic EoS.

Even though DANSs in typical galactic environments have low DM fractions for its effects to show on the mass-radius diagram, there might be some scenarios that may allow us to check the DM content of the star, such as studying the change of the tidal deformabilities which is supposed to decrease when a dark matter core is present [42] [2], and increase when the DM forms a halo [1]. In future works it would be also interesting to study the effects on the X-ray measurements of a massive and extended dark matter halo.

ACKNOWLEDGEMENTS

We thank Laura Tolos, Marina Cermeño and Yves Kini for their insightful comments and discussions. We acknowledge partial financial support to the Grant PID2022-136510NB-C32 funded by MCIN/AEI/10.13039/501100011033/ and FEDER, UE, and the project EPU-INVAUH/ 2023/003 founded by

References

References

  1. [1]A. Nelson, S. Reddy, and D. Zhou, JCAP 07, 012 (2019), arXiv:1803.03266 [hep-ph].DOI
  2. [2]V. Sagun, E. Giangrandi, O. Ivantskyi, I. Lopes, and K. A. Bugaev, PoS PANIC2021, 313 (2022), arXiv:2111.13289 [astro-ph.HE].
  3. [3]R. F. Diedrichs, N. Becker, C. Jockel, J.-E. Christian, L. Sagunski, and J. Schaffner-Bielich, Phys. Rev. D 108, 064009 (2023), arXiv:2303.04089 [gr-qc].DOI
  4. [4]C. Jockel and L. Sagunski, Particles 7, 52 (2024), arXiv:2310.17291 [gr-qc].DOI
  5. [5]C. Kouvaris, Phys. Rev. D 77, 023006 (2008), arXiv:0708.2362 [astro-ph].DOI
  6. [6]S. A. Bhat and A. Paul, Eur. Phys. J. C 80, 544 (2020), arXiv:1905.12483 [hep-ph].
  7. [7]M. Cermeño, M. A. Pérez-García, and R. A. Lineros, Astrophys. J. 863, 157 (2018), arXiv:1705.03012 [hep-ph].DOI
  8. [8]M. A. Perez-Garcia and J. Silk, Phys. Lett. B 711, 6 (2012), arXiv:1111.2275 [astro-ph.CO].
  9. [9]G. Bertone and M. Fairbairn, Phys. Rev. D 77, 043515 (2008), arXiv:0709.1485 [astro-ph].DOI
  10. [10]C. Kouvaris and P. Tinyakov, Phys. Rev. Lett. 107, 091301 (2011), arXiv:1104.0382 [astro-ph.CO].DOI
  11. [11]C. Kouvaris and P. Tinyakov, Phys. Rev. D 83, 083512 (2011), arXiv:1012.2039 [astro-ph.HE].DOI
  12. [12]J. M. Alarcón, E. Lope-Oter, and J. A. Oller, (2024), arXiv:2410.14776 [nucl-th].arxiv.org/abs/2410.14776
  13. [13]V. Doroshenko, V. Suleimanov, G. Pühlhofer, and A. Santangelo, Nature Astronomy 6, 1444 (2022).
  14. [14]L. Qi, S. Zheng, J. Zhang, M. Ge, A. Li, S.-N. Zhang, F. Lu, H. Peng, L. Zhang, H. Feng, Z. Zhang, Y. Xu, Z. Li, L. Song, S. Zhang, L. Tao, and W. Ye, The Astrophysical Journal 981, 99 (2025).
  15. [15]Y. Kini et al., Mon. Not. Roy. Astron. Soc. 535, 1507 (2024), arXiv:2405.10717 [astro-ph.HE].DOI
  16. [16]Y. Liu, H.-B. Li, Y. Gao, L. Shao, and Z. Hu, Phys. Rev. D 110, 083018 (2024), arXiv:2408.04425 [astro-ph.HE].DOI
  17. [17]B. Kain, Phys. Rev. D 103, 043009 (2021), arXiv:2102.08257 [gr-qc].DOI
  18. [18]M. F. Barbat, J. Schaffner-Bielich, and L. Tolos, Phys. Rev. D 110, 023013 (2024), arXiv:2404.12875 [astro-ph.HE].DOI
  19. [19]Z. Miao, Y. Zhu, A. Li, and F. Huang, Astrophys. J. 936, 69 (2022), arXiv:2204.05560 [astro-ph.HE].DOI
  20. [20]A. Issifu, D. P. Menezes, and T. Frederico, Phys. Dark Univ. 50, 102149 (2025), arXiv:2506.21378 [astro-ph.HE].arxiv.org/abs/2506.21378
  21. [21]T. Tangphati, G. Panotopoulos, A. Banerjee, and A. Pradhan, Chin. J. Phys. 96, 1329 (2025), arXiv:2506.17758 [gr-qc].arxiv.org/abs/2506.17758
  22. [22]R. M. Santos, R. C. Nunes, J. G. Coelho, and J. C. N. de Araujo, Phys. Rev. D 112, 104067 (2025), arXiv:2508.19382 [gr-qc].DOI
  23. [23]X.-Z. Liu, P. Mahapatra, C. Huang, A. Hazarika, C. Singha, and P. K. Das, Phys. Rev. D 112, 083032 (2025), arXiv:2506.08376 [astro-ph.HE].DOI
  24. [24]K. H.-H. Lam and L.-M. Lin, Phys. Rev. D 111, 104071 (2025), arXiv:2505.04605 [astro-ph.HE].DOI
  25. [25]Y. Dengler, S. Kulkarni, A. Maas, and K. Radl, (2025), arXiv:2503.19691 [hep-ph].arxiv.org/abs/2503.19691
  26. [26]M. Delierygiev, A. Del Popolo, L. Tolos, M. Le Dellieu, X. Lee, and F. Burgio, Phys. Rev. D 99, 063015 (2019), arXiv:1903.01183 [gr-qc].
  27. [27]Y. Dengler, J. Schaffner-Bielich, and L. Tolos, Phys. Rev. D 105, 043013 (2022), arXiv:2111.06197 [astro-ph.HE].DOI
  28. [28]N. Rutherford, G. Raaijmakers, C. Prescod-Weinstein, and A. Watts, Phys. Rev. D 107, 103051 (2023), arXiv:2208.03282 [astro-ph.HE].DOI
  29. [29]N. Rutherford, C. Prescod-Weinstein, and A. Watts, Phys. Rev. D 111, 123034 (2025), arXiv:2410.00140 [astro-ph.HE].DOI
  30. [30]J. M. Alarcón and J. A. Oller, Phys. Rev. C 107, 044319 (2023), arXiv:2212.05092 [nucl-th].DOI
  31. [31]J. M. Alarcón, E. Lope-Oter, and Y. Cano, (2025), 10.1140/epjs/s11734-025-02026-8, arXiv:2511.04737 [hep-ph].DOI
  32. [32]F. Sandin and P. Ciarcelluti, Astropart. Phys. 32, 278 (2009), arXiv:0809.2942 [astro-ph].DOI
  33. [33]F. Grippa, G. Lambiasse, and T. K. Poddar, Universe 11, 74 (2025), arXiv:2412.09381 [astro-ph.HE].DOI
  34. [34]M. Hippert, E. Dillingham, H. Tan, D. Curtin, J. Noronha-Hostler, and N. Yunes, Phys. Rev. D 107, 115028 (2023), arXiv:2211.08590 [astro-ph.HE].DOI
  35. [35]P. Tinyakov, M. Pshirkov, and S. Popov, Universe 7, 401 (2021), arXiv:2110.12298 [astro-ph.HE].arxiv.org/abs/2110.12298
  36. [36]T. Zhou and C. Huang, (2025), arXiv:2504.08662 [astro-ph.HE].arxiv.org/abs/2504.08662
  37. [37]P. Laskos-Patkos and C. C. Moustakidis, Phys. Rev. D 111, 063058 (2025), arXiv:2410.18498 [astro-ph.HE].DOI
  38. [38]L. Tolos, J. Schaffner-Bielich, and Y. Dengler, Phys. Rev. D 92, 1230002 (2015), [Erratum: Phys.Rev.D 103, 109901 (2021)], arXiv:1507.08197 [astro-ph.HE].arxiv.org/abs/1507.08197
  39. [39]J. Eby, C. Kouvaris, N. G. Nielsen, and L. C. R. Wijewardhana, JHEP 02, 028 (2016), arXiv:1511.04474 [hep-ph].DOI
  40. [40]A. Maselli, P. Pnigouras, N. G. Nielsen, C. Kouvaris, and K. D. Kokkotas, Phys. Rev. D 96, 023005 (2017), arXiv:1704.07286 [astro-ph.HE].DOI
  41. [41]C. Kouvaris and N. G. Nielsen, Phys. Rev. D 92, 063526 (2015).

Paper details

vlnc:W_v2wtn4wr
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents