WorksPhysics and Astronomy
Computational Modeling of Sublattice Magnetization in CoTb/Co/CoTb Magnetic Multilayer Nanojunctions Between Cobalt Leads
Abstract
In this work, we study the sublattice nano-magnetic behavior of CoTb/Co/CoTb sandwiched between semi-infinite cobalt leads. To perform the analysis, we use the Ising spin-based effective field theory (EFT), which enables us to determine the relevant magnetic exchange parameters for elemental cobalt JCo-Co and terbium JTb-Tb. The exchange interaction parameters are determined by fitting the magnetization calculated using the Ising effective-field theory to the experimentally measured temperature-dependent magnetization curves. This fitting procedure yields the exchange constants for Co and Tb, along with their respective Curie temperatures. We use the magnetic exchange parameter obtained using Ising EFT-based method is then seeded on to mean field theory (MFT) to calculate the sublattice magnetizations of CoTb/Co/CoTb arranged between semi-infinite cobalt leads. The sublattice magnetizations for every atomic layer and corresponding lattice sites in the layered ferrimagnetic nanostructures are computed separately. This allows us to analyze spin-site-specific parameters, magnetic moments, magnetization, and ferrimagnetic compensation behavior for varying eutectic compositions, particularly for . The results give enhanced insight into magnetic phenomena at the local level and their general relevance in the ultra-thin layered ferrimagnetic structure dynamics confined between semi-infinite cobalt electrodes. These results are needed for the understanding of magnon transport phenomena and consequent magnetic amplification effects and are crucial to the development of spintronic technologies. Most importantly, to date, no first-principles or density functional theory research exists for sublattice magnetization in such multilayered systems. The versatile approach established in this work can also be applied to other nanostructured magnetic systems
Introduction
In recent years, there has been much interest in multilayered nano-junctions. These systems have unique properties and have technological applications in the areas of spintronics[1, 2] and magnonics [3, 4, 5, 6]. In the physics of nano-junctions, these multilayered alloys play a very dominant role to classify the sublattice magnetization and atomic interfaces. Rare earth - transition metal (RE-TM) [7, 8] with the magnetic effects of the ferrimagnetic alloy nanostructure has been described in literary works in which interactions such as RE-RE, TM-TM, which involve magnetic moments in sublattices, and even RE-TM inter-sublattice interactions have been discussed [9, 10, 11]. The exchange of 3d spins is directly influenced by TM-TM interactions. On the other hand, it is often assumed that RE-RE interactions are indirect, maybe occurring via the 4f-5d-5d-4f span. A similar view has been taken on RE-TM interactions, which are also indirect and result from the combination of interatomic 4f-5d and interatomic 5d-3d [12] exchange interactions. Previous studies have shown that alloy interfaces can greatly influence their magnetic properties [13, 14, 15].
In this paper, we are dealing with the Co-Tb alloy system in which Co is a transition element and Tb is a rare earth element. At room temperature, Co is ferromagnetic, while Tb is paramagnetic, and they possess Curie temperatures of approximately 119.4 meV and 18.9 meV, respectively. The construction of nano-magnetic nano-junctions with the help of a Co-Tb alloy system in varied configurations can have a wide range of applications in various fields of technology. If we talk about bulk alloy (where is concentration), then it has a wide range of usage in the realms of magnetic storage and optical magnetic switching devices [16]. A significant understanding of lamellar Co/Tb multilayered alloy nano-junctions is acquired. Through a deep understanding of multilayered alloy nano-junctions of Co-Tb it must be emphasized that while forming amorphous alloy, there is the presence of asymmetry in spontaneous diffusion of Co into Tb, which occurs in plane and interfaces at various concentrations. To get control in the diffusion, there are experimental methods which made it possible by defining stable eutectic concentrations ( ) without changing the ferrimagnetic nature of the multilayered nanostructure systems [17]. Beyond , significant structural changes, enhanced interdiffusion, and possible modifications of the magnetic phase make the present model assumptions less reliable. Our computational formulation itself does not impose any numerical limitation on larger concentrations. Rather, the restriction is motivated by the physical validity of the model and the availability of experimentally relevant exchange parameters. It is important to note that during the formation of the amorphous alloy, an asymmetry is observed due to the natural tendency of cobalt atoms to diffuse into terbium. This diffusion manifests both within the plane and across interfaces, depending on the concentration levels.
Due to different exchange couplings at the interfaces of the bulk being observed, interdiffusion becomes a very crucial part for defining properties of the multilayered nano-junctions. This is very helpful for the determination of nano-magnetic properties [13, 14] of the multilayered alloy systems. With the help of model calculations, it is noted that there is a modification in the nano-magnetic properties of the multilayered systems when the nanoatomic scale is achieved.
This work contains a discussion of cobalt-terbium ferrimagnetic nano-junction alloy systems. The nano-junction consists of similar hcp (hexagonal close-packed) planes of cobalt leads and between these similar cobalt leads, there is nano-junction system present with arbitrarily disordered alloy having variation in hcp planes () with regard of the stable condition of in this nano-junction alloy systems. To be capable of executing these calculations, it was necessary to determine the sublattice magnetizations along with the magnetic exchange parameters of the nano-junction alloy configuration.
To investigate the magnetic exchange parameters of rare-earth–transition-metal alloys, both in bulk and multilayered systems, several studies have employed in the framework of MFT [24, 25, 27]. In these approaches, the cobalt spin is often treated as an adjustable parameter, and the model predictions are calibrated to be consistent with MFT-based estimates [26]. As a result, the calculated temperature-dependent magnetization can deviate significantly from experimental observations [11], without providing a clear theoretical basis for the chosen spin value. In the present work, we address this issue by determining the exchange constants for Co and Tb directly by fitting the magnetization curve obained from EFT theory with the experimentally measured temperature-dependent magnetization, the spin values referenced to the fundamental spin states of the respective atoms.The magnetic exchange parameter obtained using Ising EFT-based method is then seeded on to the MFT to calculate the sublattice magnetizations of , arranged between semi-infinite cobalt leads. This provides a physically motivated description of the magnetic properties of the system.
In this study, modeling of sublattice magnetizations and magnetic exchange constants is achieved with the help of EFT and MFT methods. System of alloy layered system which is being sandwiched in between the semi-infinite cobalt leads at required condition of [13]. In the past, single layered alloy nanostructure sandwiched between semi-infinite cobalt leads have been studied [13] therefore, as one would expect, this triple-layered alloy nanostructure system is more complicated than before. Despite their complex nature, these triple-layered systems turned out to have more wider range for the principle of spin wave filtering than single-layered systems, which shows that although triple-layered systems are complex but they have more appositeness than single-layered system. This study is hence motivated with the objective of presenting complex computational modeling for ballistic transport and spin wave scattering (incident from cobalt lead) and primary nano-magnetic properties of this triple nanostructure for basic technological interest. The nanojunction structure is assumed to be in a hcp configuration along the (0001) crystallographic planes that constitute the foundation of these lamellar nanostructures made up of alloy layers ...CoCo... and these planes are perpendicular to the crystallographic -axis, which is parallel to the cobalt lead direction.
This alloy layered nanostructure is approximately 1.5 nm of cobalt terbium alloy system composite, which differentiates it from bulk alloy and system, which consist of multiple layers. The infallible data is required for the computation of magnetic exchange constants and sublattice magnetization of the system, so that modeling studies can be developed for ...Co[[l′l′]]Co... so that ballistic spin wave transport can be discussed. This need is our motivation for EFT calculations so that we can regulate a data which has no fitting parameters by taking the basic spin values (at absolute 0 Kelvin) for cobalt and terbium as and , respectively.
The discussion about the construction of paper is the following, Section 2 consists of EFT ising spin method which is necessary for the computation of reliable values of magnetic exchange constants for pure crystalline materials of cobalt and terbium and , respectively. In order to get , the obtained values of exchange constants are allotted to nearest neighbor Co-Co and Tb-Tb interactions that occur in ...Co[[l′l′]]Co... alloy nano-junction systems. Also, Section 3 comprises combinedEFT ad MFT techniques so that sublattice magnetizations can be calculated for cobalt and terbium sites, temperature-dependent in nature. These locations are situated on hcp basal atomic planes of alloy stacking as [l′l′] for lamellar nano-junctions at varying of alloy with a thickness of [2′22′] and [3′33′]. At the end of this section, sublattice magnetization and correspondent compensation temperatures are also indicated. In Section 4, the overall summary and conclusions are discussed.
Ising Effective Field Theory Modeling for Pure Co and Tb Systems:
In order to calculate the exchange constants between cobalt-cobalt and terbium-terbium atoms of nano-magnetic system we use Ising effective field theory. This method mainly uses single-site correlation as the key approximation. Decoupling approximation is introduced to simplify the higher-order spin correlation functions appearing in the EFT equations, allowing the coupled nonlinear equations for the layer magnetizations to be solved numerically.[13] The exchange constant calculations for cobalt and terbium crystals are extracted by comparing the EFT magnetization output with the experimental data. The calculated results of EFT magnetizations and exchange constants obtained for cobalt are further used for the calculation of sublattice magnetizations for ...Co[[l′l′]]Co... layered system placed in between the semi-infinite cobalt leads, here the quantity [l′l′] with prime l′ denote alloy and un-prime denote pure cobalt layers. The schematic representation of multilayered structure of [CoTb][Co][CoTb] which is placed in between semi-infinite cobalt leads are shown in Figure 1.
(a)

(b)
Figure 1. Schematic representation of the nano-junction sandwiched between semi-infinite crystalline cobalt leads. (a) One-dimensional chain representation of the consecutive hcp (0001) atomic planes. (b) Corresponding three-dimensional hcp lattice structure, showing the alternating stacking of cobalt and alloy (0001) basal planes along the -axis, centered at the mid-plane . The -axis of the hcp crystal is perpendicular to the (0001) symmetry planes.
The Ising spin Hamiltonian by neglecting Zeeman effects and local spin anisotropy can be written as,[18, 19]
In the above equation, is the magnetic exchange constant concerning nearest neighbors that generates order of spin in the selected z direction, sum over nearest neighbors is represented by . Both Co and Tb have a coordination number with fundamental spins of Co and Tb. The components and refer to the spin S operators at sites and .
The EFT formulation also involves the estimation of thermodynamic canonical averages, which can be expressed in terms of canonical characteristic functions, or generating functions whose symbolic and numerical expression is given as:
In above equation, is Boltzmann Constant, is temperature and Op is the general spin operator which involves the spin is of the form,
Here is the differential operator with respect to the auxiliary field . The analysis we are conducting focuses solely on the canonical averages of the single-site spin variables because of the decoupling approximation, represented as and . is now a single site Hamiltonian,
The spin variables and in EFT can be determined using the Van der Waerden identities. For the Co spin , VdW identity is:
The Vdw identity is solved for Tb with fundamental as,
In above equation,
Our method for calculating spin variables combines symbolic and numerical techniques. In this approach, each variable is associated with numerous contributing terms which grow as the spin value and the number of interacting neighbors (coordination number) increase.
The exchange constant meV [11], meV and the EFT calculated normalized magnetizations for hcp- across varying temperatures compared with experimental data [11, 20] are depicted in Figure 2. Given the close correspondence between both curves, it can be concluded that the model demonstrates good agreement with and meV (blue continuous curve). Similarly, EFT calculated normalized magnetizations with and exchange meV [21, 22] for hcp− across varying temperatures compared with experimental data are presented in Figure 3. The exchange coefficient between and i.e meV is taken from Shigeo Honda et al. [22]. These values are then used for numerical computation to determine spin variables. By utilizing the calculated these variables along with the g factors (), which are 2.2 and 1.5 [23] for cobalt and terbium,respectively, the magnetic moment per site can be determined as a function of temperature. Moderate variations in exchange constants primarily shift the Curie and compensation temperatures while preserving the qualitative behaviour of the layer-resolved magnetization. Hence, therefore the exchange constants calculated from EFT model in accordance with experimental results has been used in the numerical computation of theoretical model.

Figure 2. EFT calculated normalized magnetizations (continuous blue curve) for hcp- across varying temperatures compared with experimental measurements (dashed red curve)
Figure 3. EFT calculated normalized magnetizations (continuous blue curve) for hcp−Tb across varying temperatures compared with experimental measurements (dashed red curve).
Ferrimagnetic lemellar alloy layered nanostructure between semi-infinite cobalt leads:
For our calculation of sublattice magnetization, we use the exchange constant values obtained from the EFT computation technique and input them into MFT-based expressions. We assume that the Co-Tb multilayer alloy nano-junction can be modeled as an hcp crystal structure with randomly oriented Co and Tb atoms. Although the actual structure might be amorphous and more complex, we consider this approximation. In their pure states, both cobalt and terbium form hcp crystal structures. For our study, we assume that the orientations of the atoms are uniformly random in each basal plane of the alloy nano-junction and in addition to this, we have neglected differences in atomic sizes. Each (0001) basal plane site in the hcp structure has six nearest neighbors within the same plane and six from the neighboring planes. Alternating hcp (0001) atomic planes constitute the system, with abrupt and crystalline interfaces between the leads and the layered nanostructure. By the aid of ultramodern experimental methods for Co-Tb multilayer systems, one can reduce interface roughness and regulate atomic interdiffusion and obtain a stable eutectic composition –. In order to calculate the sublattice magnetization for the individual basal atomic hcp planes of the alloy-layered nanostructures with the use of MFT, we begin with Brillouin’s functions to find the different spin variables and proceed with the thermodynamic canonical spin variable which can be given as,
For the th alloy atomic plane, is thermodynamic spin variable such that and . Where refers to the atomic elements, either for Co or Tb. represents the spin of the corresponding atomic element, and denotes molecular field energy for element in plane resulting from interactions with the nearest neighboring atoms () in the th atomic layer. represents thermal energy given in meV. Taking as the g factor for the element of alloy situated in th plane, the effective magnetic moment, , per site in the th plane is expressed as the following (in units of Bohr magnetons),
alloy layered ferrimagnetic nanostructure between cobalt leads
This section deals with the alloy layered nano structure implanted in between the cobalt leads with and as the concentration of Tb and Co atoms. In order to obtain the molecular field energy for the Co atom within the hcp first basal plane in the nano-layered structure on the surface adjacent to cobalt lead under the MFT treatment, it is expressed as,
For simplification the notations for exchange interaction are denoted as , and . Equivalently, we can express the molecular field energy of a Tb atom on the first hcp basal plane in the layered nanostructure at the interface with cobalt lead according to MFT, as below,
In our current conception, initial spin value for lead of pure Co atom at the interface with alloy-layered nanostructure is designated by . Molecular field energy of cobalt for second basal plane of layered nanostructure at the interface with semi-infinite lead of cobalt is as follows,
Likewise, we can express molecular field energy of cobalt on the second basal plane of layered nanostructure at the interface with lead of pure cobalt is as follows,
Basal planes of hcp for which is layered in between the are called as third and fourth atomic planes,respectively. With the help of symmetry attributes for layered alloy nano-junction we observed that . The molecular field energy for cobalt on third atomic plane is as follows,
The equations discussed above can have the following matrix form,
From above equation we can write the coefficient matrix as,
From above is defined as , and are and , respectively.
By using equations (7)-(13), equation (14) represents matrix of non-linear equations which were solved for spin variables as given in equation (16).
By the use of symmetry following can be simplified,
Values of , , , and can be solved numerically with the help of above equations for required concentration. Figure 4 has description of first and second basal hcp planes for magnetic moments as a function of temperature using equation 8 and values of factor for Co and Tb, which are 2.2 and 1.5, respectively, for all values of . In the figure, compensation temperature ( meV) can be noticed in the ferrimagnetic hcp plane for the given eutectic concentration with a range from 0.3 to 0.5. In this study compensation occurs due to the different temperature dependences of the Co and Tb sublattice magnetizations, while the antiferromagnetic Co–Tb exchange interaction keeps the two sublattices oppositely aligned. We also discuss how increasing the Tb concentration strengthens the rare-earth contribution, which leads to a shift in the compensation temperature. In addition, the interface layers have exchange environments that are different from those of the interior layers, resulting in layer-dependent magnetization.
Figure 4. The magnetic moments per site, computed for atoms in the first (solid curves) and second (dashed curves) hcp basal (0001) planes of the alloy-layered ferrimagnetic nanostructure , placed between cobalt leads, show only minor differences near the end of the ordered phase as temperature () rises. The down arrows indicate how the site-resolved magnetic moments change with stepwise increase in .
[CoTb][Co][CoTb] alloy layered ferrimagnetic nanostructure between cobalt leads
By the symmetry properties,
For layered alloy nanostructures, there is symmetry about the origin, which is for in hcp plane.Equivalently, we can also represent the molecular field energy for like it was represented for .
From Eqs. 9-13 we can observe that there is a change in molecular field energies concerning temperature variations for both cobalt and terbium. Due to this variation in the molecular field energies in the whole temperature range, values of magnetizations () can be found. From the observation of Figure 4 and Figure 5, we have observed that magnetization increases at low temperature and the maximum value of is reached before the loss of magnetic phase. As we said for [2’22’], in a similar way, we can solve non-linear equations (Eq. (16)) analytically to acquire magnetic moments and spin variables separately in each hcp basal plane of the multilayered alloy nanostructure. Where irreducible spin variables can be expressed as follows,
Figure 5. The computed magnetic moments per site for the first, second and third hcp basal planes of alloy.
It was well defined earlier that for cobalt and terbium are and , respectively. For this system of alloy, which is ferrimagnetic, we have assumed that spin up is for cobalt and spin down is for terbium. Exchange constant for terbium is weaker than that of cobalt, even though is three times that of .
The model for computation that we discussed can be used in general for more atomic planes, too. In general, for layered alloy system with [Co Tb] [Co] [Co Tb] placed between semi-infinite cobalt leads.Although generalization of this computation is possible but with the escalation in the values of , the consequence of this is that we get the limiting solutions for sublattice magnetizations for core atomic planes.
[CoTb][Co][CoTb] and [CoTb][Co][CoTb] alloy layered ferrimagnetic nanostructure between cobalt leads
The 2’32’ and 3’23’ Co-Tb layered structures show little different magnetic behaviors due to their unique stacking patterns. The molecular field energy can be calculated in the equivalent way as 2′2″ and 3′3″. The following are matrix form representations for molecular field energy of the 2′32′ (Eq. (21)) and 3′23′ (Eq. (23)),
Figure 6 and Figure 7 illustrates computed spin variables for and layered structure,respectively.These trends are compatible with theoretical predictions under the effective field theory approach, in which thicker Co-layers suppress the rare-earth effect and stabilize the overall magnetization profile.
Figure 6. The graph shows the change in the spin variables for alloy layered naojunction as a function of temperature.
Figure 7. The graph shows the change in spin variables of as a function of temperature.
alloy layered nanostructure between cobalt leads
The concept for limiting solutions of spin variables and effective magnetic moments per site is illustrated in this section. In this section we have provided description of the computed values of spin variables ( and ) for value of and 2 as in Figure 8. The plot provides the value of these spin variables as a function of temperature for a step difference of 0.1 at . We analyze the alloy layered nano-junction for .The combined EFT-MFT model is applied here to determine spin variables as well as the magnetic moments per site for the chosen concentration, which is 0.4. The determination of spin variables ( and ) and magnetic moments is performed for layered alloy nanostructure for each hcp
(a)
(b)
Figure 8. Computed spin variables for Co and Tb sites on the 1st (a) and 2nd (b) (0001) hcp basal planes of alloy-layered nanostructure
basal planes which is function of temperature, and thickness( and 3). We have computed magnetic moments in the units of bohr magnetons. In Figure 9 we have discussed about magnetic moments as function of temperature for each site for [Co Tb] [Co] [Co Tb] and [Co Tb] [Co] [Co Tb] in figures (a) and (b), respectively .It was noticed that for magnetic moment was not much diversified with an increase in thickness (), which is clearly evident with Eq. (19) as it does not vary much with . In contradiction to this, for there is variation in the magnetic moments with variation in thickness (figure (b)). This can be noticed at meV up to room temperature, which is about 26 meV. By this we also expected with respect to the ferrimagnetic alloy nano-junction [Co Tb] [Co] [Co Tb] placed between the cobalt leads. If we dicuss about ferrimagnetic alloy system [Co Tb] [Co] [Co Tb] placed in between the cobalt leads then, for this system is found to be less than and equal to the and , which are the spin variables with respect to system. Interestingly, the behavior of the [] layered structure, featuring pure cobalt planes, is found to closely resemble that of the [] system with pure cobalt planes. This observation highlights that increasing the number of cobalt planes only slightly alters the magnetization profile for these specific configurations. These findings align with theoretical expectations, showing that as the thickness of the ferrimagnetic alloy nano-junction increases, the computed magnetization values exhibit a limiting behavior.
(a)
(b)
Figure 9. 9(a) and 9(b) represent effective magnetic moments per site for and , respectively, for [Co] [Co] [Co Tb] as well as [Co] [Co] [Co Tb].
In Figure 10 temperature variation on the nominal cobalt hcp basal planes within the alloy-layered ferrimagnetic nanostructures [CoTb][Co][CoTb] and [CoTb][Co][CoTb] are presented. These are compared by varying the temperature of spin variable on cobalt leads. This trend can be attributed to the influence of the semi-infinite cobalt leads and the structural constraints of the layered systems. Overall, the results emphasize how both the temperature and the structural arrangement of the ferrimagnetic alloy significantly influence its magnetic properties. We would like to emphasize that fundamental physical variables, such as the exchange interactions and the sublattice magnetizations of both cobalt and terbium sites, play a crucial role in the calculations of spin dynamics for magnetic nanostructures. These variables are essential for studying magnon transport, particularly in the field of Magnonics, including ballistic magnon transport. In the following table, we present an example of the calculated spin variables: is constant (equal to 1) throughout the system, while varies across the identified atomic planes 1, 2, , for the layered nanostructures [...Co][2′22′][Co....] and [....Co][3′33′][Co....], embedded between cobalt leads. These calculations are carried out at room temperature (300 K) for the stable eutectic compositions, using a combined approach of EFT and MFT.
Figure 10. The calculated spin variables and their detailed variation with temperature.
| Concentration | \multicolumn{4}{c}{2’22’} | \multicolumn{6}{c}{3’33’} | ||||||||
| 0.1 | -0.87 | -0.87 | -0.87 | -0.87 | -0.87 | -0.87 | -0.87 | -0.87 | -0.87 | -0.87 |
| 0.2 | -0.85 | -0.85 | -0.85 | -0.85 | -0.86 | -0.84 | -0.86 | -0.86 | -0.84 | -0.86 |
| 0.3 | -0.83 | -0.83 | -0.83 | -0.83 | -0.82 | -0.81 | -0.83 | -0.82 | -0.81 | -0.83 |
| 0.4 | -0.81 | -0.81 | -0.81 | -0.81 | -0.78 | -0.78 | -0.81 | -0.78 | -0.78 | -0.81 |
| 0.5 | -0.78 | -0.78 | -0.78 | -0.78 | -0.74 | -0.74 | -0.78 | -0.74 | -0.74 | -0.78 |
Table 1. Spin variable for Tb sites on atomic planes 1, 2, , in the 2’22’ and 3’33’ nanojunction systems between cobalt leads at eutectic composition () and K.
Summary and Conclusions:
In this study, we apply a combined approach of EFT and MFT to investigate magnetic properties of cobalt and terbium atomic sites within a ferrimagnetic alloy nano-junction, positioned between leads of pure cobalt. Further, results were analyzed as function of temperature, eutectic composition of nano-junction (), and thickness across a range of concentrations that ensure the system’s stability. This model is versatile and can be adapted to explore other alloy combinations and nanostructures. To be precise, we computed sublattice magnetization for cobalt and terbium sites with respect to each hcp basal plane (0001) using a combination of EFT and MFT methods. We utilize the Ising EFT method, well-known for its flexibility, to determine the exchange constants for Co and Tb crystals in their ordered magnetic phase, by cross-referencing with experimental data. The method evaluates various spin contributions, including exchange interactions, anisotropy, and Zeeman terms, using spin values for cobalt and terbium. We also computed spin variables which are provided by table 1 these values were obtained using combined EFT and MFT methods. The spin variable for Co sites throughout is found to be 1 at room temperature.
Moreover, we compute sub-lattice magnetizations for both Co and Tb sites, as well as magnetic moments per site in each nano-junction layer, using stable eutectic compositions. Given that the ferrimagnetic system in this study is ultra-thin and structurally different from previously studied bulk systems, drawing meaningful comparisons between the sub-lattice magnetizations obtained here and the overall magnetization calculated through the MFT method is not straightforward. This difficulty arises from the lack of adjustable parameters in our calculations.
By substitution of the results obtained using MFT for alloy lamellar ferrimagnetic nanostructure and seeding them with the EFT computations for cobalt leads, starting from interface and extending inwards, the sub-lattice magnetizations for both the cobalt and terbium sites within nanostructure were calculated. The intrinsic spins of Co and Tb, along with the determined exchange constants within the nano-junction layers, are key factors in analyzing the spin dynamics and quantum transport of magnons across these ferrimagnetic junctions. This research provides new insights into the behavior of such nano-junctions, unlocking the opportunities for advanced technological applications.
Acknowledgements
One of the authors (V.A.) gratefully acknowledges the financial support received through the Core Research Grant No. CRG/2023/001573 from the Science and Engineering Research Board (SERB), Anusandhan National Research Foundation (ANRF), Government of India.
References
- [1]A. A. Serga, A. V. Chumak, A. Andre, G. A. Melkov, A. N. Slavin, S. O. Demokritov and B. Hillebrands, Spin waves in microstructured magnetic elements, Phys. Rev. Lett. 99, 227202 (2007).
- [2]I. Žutić, J. Fabian and S. Das Sarma, Spintronics: Fundamentals and applications, Rev. Mod. Phys. 76, 323 (2004).DOI
- [3]L. Frackowiak, F. Stobiecki, M. Urbaniak, M. Matczak, G.D.C. O Flynn, M. Bilski, A. Glenz and P. Kuswik, Magnetic properties of Co-Tb alloy films and Tb/Co multilayers as a function of concentration and thickness, J. Magn. Magn. Mater. 544, 168682 (2022).DOI
- [4]V. V. Kruglyak, S. O. Demokritov and D. Grundler, Magnonics, J. Phys. D: Appl. Phys. 43, 264001 (2010).
- [5]K. Lee and S. K. Min, Nonlinear dynamics of a spin-torque oscillator with a perpendicular polarizer, J. Appl. Phys. 104, 053909 (2008).
- [6]T. Schneider, A. A. Serga, B. Leven, B. Hillebrands, R. L. Stamps and M. P. Kostylev, Realization of spin-wave logic gates, Appl. Phys. Lett. 92, 022505 (2008).DOI
- [7]J. P. Andrés, J. L. Sacedón, J. Colino and J. M. Riveiro, Effect of surface roughness on the coercivity of polycrystalline sputtered Co films, J. Appl. Phys. 87, 2483 (2000).
- [8]O. S. Amilturk and A. R. Koymen, Influence of elastic softening and surface roughness on coercivity of exchange-coupled bilayer films, Phys. Rev. B 68, 024430 (2003).
- [9]J. A. Gonzalez, J. Colino, J. P. Andres, M. A. Lopez de la Torre and J. M. Riveiro, Magnetic properties and surface roughness of Co/Cu multilayers: An anomalous Hall effect study, Physica B 345, 181 (2004).
- [10]P. Hansen, C. Clausen, G. Much, M. Rosenkranz and K. Witter, Magnetic and magneto-optical properties of rare-earth transition-metal alloys containing Gd, Tb, Fe, Co, J. Appl. Phys. 66, 756–767 (1989).DOI
- [11]M. Abou Ghantous, A. Khater, V. Ashokan and D. Ghader, Sublattice magnetizations of ultrathin alloy [Co₁−cGdc]n nanojunctions between Co leads using the combined effective field theory and mean field theory methods, J. Appl. Phys. 113, 094303 (2013).DOI
- [12]N. H. Due, T. D. Hien, D. Givord, J. J. M. Franse and F. R. de Boer, Exchange interactions in rare earth–transition metal compounds, J. Magn. Magn. Mater. 124(1–3), 305–311 (1993).
- [13]M. Abou Ghantous, A. Khater, V. Ashokan and D. Ghader, Sublattice magnetizations of ultrathin ferrimagnetic lamellar nanostructures between cobalt leads, SPIN 13(01) (2023).arxiv.org/abs/2005.03965
- [14]V. Ashokan, M. Abou Ghantous, D. Ghader and A. Khater, Computation of magnons ballistic transport across an ordered magnetic iron–cobalt alloy nanojunction between iron leads, J. Magn. Magn. Mater. 363, 66 (2014).
- [15]V. Ashokan, M. Abou Ghantous and A. Khater, Modeling the sublattice magnetizations for the layered bcc nanojunction Fe[Fe1−cCoc]Fe systems, J. Magn. Magn. Mater. 396, 16–25 (2015).DOI
- [16]A. Ciuciulkaitaite, K. Mishra, M. V. Moro, I.-A. Chioar, R. M. Rowan-Robinson, S. Parchenko, A. Kleibert, B. Lindgren, G. Andersson, C. S. Davies et al., Magnetic and all-optical switching properties of amorphous TbxCo100−x alloys, Phys. Rev. Mater. 4(10), 104418 (2020).
- [17]R. E. Camley and R. L. Stamps, Micromagnetic study of magnetization reversal in small magnetic particles, J. Phys.: Condens. Matter 5, 3727 (1993).
- [18]M. Gottwald, M. Hehn, D. Lacour, T. Hauet, F. Montaigne, S. Mangin, P. Fischer, M.-Y. Im and A. Berger, Asymmetric magnetization reversal in dipolarly coupled spin valve structures with perpendicular magnetic anisotropy, Phys. Rev. B 85, 064403 (2012).DOI
- [19]J. Strecka and M. Jasc̆ur, A brief account of the Ising and Ising-like models: Mean-field, effective-field and exact results, arXiv preprint arXiv:1511.03031 (2015).arxiv.org/abs/1511.03031
- [20]MD Kuz’min, Shape of temperature dependence of spontaneous magnetization of ferromagnets: quantitative analysis Physical review letters 694(107204) (2005).pubmed.ncbi.nlm.nih.gov/15783517
- [21]E. A. Moujaes, A. Khater and M. Abou Ghantous, Combined analysis of ferromagnetic materials using the Heisenberg Green functions and Ising EFT methods, J. Magn. Magn. Mater. 391, 49–59 (2015).DOI
- [22]S. Honda and M. Yoshiyama, Magneto-optical Kerr rotation and sublattice magnetic moments in RE-Co sputtered films, Jpn. J. Appl. Phys. 27(9R), 1687 (1988).
- [23]J. Finley and L. Liu, Spin–orbit-torque efficiency in compensated ferrimagnetic cobalt–terbium alloys, Phys. Rev. Appl. 6(5) (2016).arxiv.org/abs/1610.09200
- [24]R. E. Camley and D. R. Tilley, Phase transitions in magnetic superlattices, Phys. Rev. B 37(7), 3413 (1988).pubmed.ncbi.nlm.nih.gov/9944934
- [25]M. Mansuripur and M. F. Ruane, Mean-field analysis of amorphous rare earth-transition metal alloys for thermomagnetic recording, IEEE Trans. Magn. 22, 33 (1986).DOI
- [26]S. Demirtas, R. E. Camley and A. R. Koymen, Tunable thermal hysteresis in CoGd alloys, Appl. Phys. Lett. 87, 202111 (2005).DOI
- [27]C. A. F. Vaz, J. A. C. Bland and G. Lauhoff, Magnetism in ultrathin film structures, Rep. Prog. Phys. 71, 056501 (2008).DOI










