betaFeedback

WorksPhysics and Astronomy

Hierarchical coupling in tripartite van der Waals cavity magnonics for a low-loss and tunable coupled-mode Hamiltonian

Abstract

One of the greatest merits of cavity magnonics (CM) is the ability to explore rich coupled-mode physics, driven by the large in situ flux tunability of magnonic resonances and magnon–photon coupling. Meanwhile, van der Waals (vdW) magnets offer an ultra-compact and highly integrated implementation of CM without complex fabrication processes. Nonetheless, the substantial magnon losses significantly hinder the combination of all these advantages. Here, we realize a hierarchical anti-crossing structure in a tripartite vdW CM with CrCl3 and realize an effective coupled-dual-mode Hamiltonian. We achieve an order-of-magnitude reduction in loss while maintaining a strong coupling condition. Additionally, we theoretically confirm the feasibility of simultaneous and in situ tuning of both loss and coupling by varying the magnetic field direction and strength. Featuring a micrometer-scale thickness and a width of a few millimeters, our device is significantly smaller than those based on bulk crystals or crystal arrays. Our results establish vdW cavity magnonics as versatile platform for investigating intriguing phenomena predicted in coupled-mode systems.

main.pdf

Hierarchical coupling in tripartite van der Waals cavity magnonics for a low-loss and tunable coupled-mode Hamiltonian

Abstract

Introduction

Cavity magnonics (CM) has emerged as a powerful paradigm for enabling the efficient probing of magnon dynamics, coherent information processing, and the development of quantum hybrid systems [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14]. A defining merit of CM lies in its capacity to explore rich coupled-mode physics and engineer microwave photonic modes, which is fundamentally driven by the large in situ flux tunability of magnonic resonances and the magnon–photon coupling strengths [15]. The associated phenomena involve coherent perfect absorption (CPA) [17, 18], exceptional points (EPs) [19, 20, 21, 22], topological effects [23, 24], ultrastrong coupling [25, 26] and other various phenomena [27, 28, 29, 30]. The applications in these directions, however, require sufficiently low magnon damping, and consequently, most experimental studies implementing such intriguing coupled-mode physics with magnons have mainly employed low-damping systems

such as bulk Yttrium iron garnet (YIG) crystals [17, 18, 19, 21, 23, 24, 27, 30].

Meanwhile, van der Waals (vdW) materials have attracted immense attention for extending these capabilities toward the two-dimensional limit [31, 32, 33, 34, 35, 36]. They offer a promising pathway for planar, ultra-compact and highly integrated cavity magnonic architectures while minimizing fabrication efforts [37, 38, 39, 40, 41, 42, 43]. Furthermore, vdW magnets provide unprecedented merits such as gate- and strain-induced tunabilities of their magnetic properties [44, 45], and the ability to form suspended drumhead structures [46], alongside stronger nonlinear effects due to their small spin numbers [47, 48].

Despite the successful demonstration of strong cavity–magnon coupling in CM based on vdW magnets [37, 38, 41, 42, 43], substantial magnon dissipation remains a critical bottleneck. This causes the signal to be obscured by the background near the cavity–magnon resonance, making it difficult to properly identify. Furthermore, this large dissipation severely complicates time-domain pulse-based measurements. Because the measurements must be completed within the extremely short timescale, strict bandwidth requirements are imposed on the measurement electronics. This tight time window also exacerbates pulse signal distortions and reflections caused by impedance mismatches at the input and output. Ultimately, these combined challenges substantially limit the utility of vdW cavity magnonics as a practical platform for exploring coupled-mode physics.

In this work, we devise and demonstrate a scheme to merge the advantages of vdW magnets and effectively realize a low-loss coupled-dual-mode Hamiltonian. We mitigate the substantial magnon loss utilizing a tripartite coupling scheme, incorporating an auxiliary cavity mode into a conventional vdW cavity CM architecture. As experimental platform, we employ CrCl3_3 and Nb superconducting planar resonators. By optimizing the device parameters, we implement a hierarchical anti-crossing structure in the resonator transmission. While such structures have been reported in other systems [49, 50], they remain unprecedented in CM. Unlike the sequential anti-crossings previously observed in multi-mode CM [15, 51, 52, 53], this secondary anti-crossing sits on one of the primary branches. This exhibits a distinct dispersive-to-resonant transition and our analysis reveals that the damping of vdW magnons is reduced by an order of magnitude, manifesting the formation of strongly coupled and loss-mitigated two-mode Hamiltonian.

Our device features a micrometer-scale thickness and a width of a few millimeters, making it significantly smaller than systems based on low-damping bulk crystals or crystal arrays [17, 18, 19, 21, 23, 24, 27, 28, 29, 30]. Although we investigate only a specific regime here, our theoretical model supports the feasibility of simultaneously tuning the coupling and dissipation. This capability will enable the exploration of various non-Hermitian phenomena using an ultra-compact platform. Additionally, we aim to theoretically investigate the implementation of this scheme with superconducting qubits.

Results and discussion

Theoretical description.

Fig. 1(a,b) illustrates the configuration of the vdW cavity magnonic systems. Here, the resonance frequencies (ωc,ωb)(\omega_c,\omega_b), annihilation operators (c,b)(c,b), and dissipation rates (κ,γ)(\kappa,\gamma) describe the cavity and magnon modes, respectively, with gbg_b denoting the coupling strength between them. The yellow regions in the circuit diagrams represent the vdW flakes, while B⃗\vec{B} and I⃗\vec{I} denote the applied external magnetic field and the resonator current, respectively. As shown in the adjacent panels, ωb\omega_b and gbg_b can be tuned by varying the magnetic field strength ∣B⃗∣|\vec{B}| and its orientation angle ϕ\phi.

We numerically calculate the resonator transmission ∣S21∣2|S_{21}|^2 using realistic experimental parameters. For the cavity, we set κ/2π=2.5 MHz\kappa/2\pi= 2.5\,\mathrm{MHz}, κex/2π=0.25 MHz\kappa_{\mathrm{ex}}/2\pi= 0.25\,\mathrm{MHz}, and ωc/2π=4.2 GHz\omega_c/2\pi= 4.2\,\mathrm{GHz}. For magnons in Cr-based vdW materials, γ/2π\gamma/2\pi is on the order of 100 MHz, based on both theoretical predictions [54] and experimental demonstrations [38]. In principle, both ωc\omega_c and κ\kappa depend on ∣B⃗∣|\vec{B}|, however, we omit this dependence in the calculations in Figure 1 for simplicity, while explicitly accounting for it when analyzing the experimental data. For CrCl3_3, the material chosen for our study, the magnon frequency ωb\omega_b exhibits an approximately linear dependence on ∣B⃗∣|\vec{B}| near ωc\omega_c, with ∣B⃗∣∼100 mT|\vec{B}| \sim100\,\mathrm{mT} representing the typical field scale where ωb∼ωc\omega_b \sim\omega_c. Based on these considerations, we set γ/2π=100 MHz\gamma/2\pi= 100\,\mathrm{MHz} and ωb/2π=(42 GHz T−1)∣B⃗∣\omega_b/2\pi= (42\,\mathrm{GHz\,T^{-1}})|\vec{B}|. We also set gb/2π=300 MHzg_b/2\pi= 300\,\mathrm{MHz}, feasible value with sufficiently thick CrCl3_3 flakes [37, 38].

Effective coupled-dual-mode Hamiltonian from tripartite hierarchical coupling with van der Waals cavity magnonics

Figure 1. Effective coupled-dual-mode Hamiltonian from tripartite hierarchical coupling with van der Waals cavity magnonics. (a) Cavity magnonics (CM) configuration with resonant frequencies (ωc,ωb)(\omega_c,\omega_b), field operators (c,b)(c,b), dissipation rates (κ,γ)(\kappa,\gamma), and coupling (gb)(g_b). (b) Circuit diagram. Yellow represents vdW flakes. B⃗\vec{B} and I⃗\vec{I} indicates in-plane magnetic field and current vector of the resonator. ωb\omega_b and gbg_b are magnetically tunable as changing ∣B⃗∣|\vec{B}| and ϕ\phi. (c) Calculated ∣S21∣2|S_{21}|^2 of the cavity transmission with realistic parameters. (d–e) Tripartite coupling scheme, introducing an auxiliary cavity distinguished by subscripts aa. (f) Formation of cavity magnon-polaritons (CMPs, dashed box). The gradations represent the contributions from the magnons and cavity fields to each CMP mode. The annihilation operators of the upper and lower CMPs (CMP+_+, respectively) are defined as d±d_{\pm}. Each mode possesses resonance frequencies ωd±\omega_{d\pm} and damping rates γ±\gamma_{\pm}, and interacts with the auxiliary cavity with coupling strengths gc±g_c^{\pm}. (g) Calculated gc+/gcg_c^+/g_c and γ+/γ\gamma^+/\gamma with respect to the mixing angle θ\theta between the cavity photons and magnons (θ=12arctan⁡(2gbωc−ωb))(\theta= \frac{1}{2}\arctan\left(\frac{2g_b}{\omega_c-\omega_b}\right)) when κ=0\kappa=0. One can in situ tune θ\theta as changing ∣B⃗∣|\vec{B}| and ϕ\phi, as presented in (b). We are focused on achieving a strong and resonant coupling between the CMP and auxiliary cavity mode (γ+,κa≪gc+, ωd+≈ωca)(\gamma_+,\kappa_a\ll g_c^+,\ \omega_{d+}\approx\omega_{ca}) with decent gcg_c and sufficiently low θ\theta. A vertical line indicates the experimental regime. (h) Calculated ∣S21∣2|S_{21}|^2 in the tripartite configuration. Hierarchical anti-crossing structure appears, manifesting the realization of H^eff\hat{H}_{\mathrm{eff}}. See the main text for the calculation parameters.

Figure 1(c) shows the calculation result based on those parameters. Although a signature of strong coupling emerges, it becomes faint near resonance owing to the large magnon dissipation rate. This substantially limits the utility of vdW cavity magnonics as a platform for exploring coupled-mode physics.

Figure 1(d–Figure 1e) describe the tripartite configuration. Here, we introduce an auxiliary cavity, distinguished by subscript aa, is coupled with a strength gcg_c. The system Hamiltonian reads

Hℏ=(ωc−iκ)c†c+(ωca−iκa)ca†ca+(ωb−iγ)b†b+gc(c†ca+ca†c)+gb(b†c+c†b).\frac{H}{\hbar} = (\omega_c-i\kappa)c^\dagger c + (\omega_{ca}-i\kappa_a)c_a^\dagger c_a +(\omega_b-i\gamma)b^\dagger b +g_c(c^\dagger c_a+c_a^\dagger c)+g_b(b^\dagger c+c^\dagger b).

Here, gcg_c indicates the coupling between the cavities.

In Figure 1(f), we describe the system on the cavity magnon–polaritons (CMPs) basis. We introduce d±d_\pm, the annihilation operators of the CMP as below

d+=ccos⁡θ+bsin⁡θ,(1)d_+ = c\cos\theta+b\sin\theta, \tag*{(1)}
d−=csin⁡θ−bcos⁡θ.(2)d_- = c\sin\theta-b\cos\theta. \tag*{(2)}

Here, θ=12arctan⁡(2gbωc−ωb)\theta=\frac{1}{2}\arctan\left(\frac{2g_b}{\omega_c-\omega_b}\right) (0≤θ≤π4)(0\leq\theta\leq\frac{\pi}{4}) is a mixing angle between the cavity photons and magnons. Confining ourselves to θ<π/4\theta<\pi/4, each CMP mode can be classified into upper (+)(+) and lower (−)(-) components. The damping rates γ±\gamma^\pm and the resonance frequencies ωd±\omega_{d\pm} of each CMP mode are respectively given as below

γ+=κcos⁡2θ+γsin⁡2θ,(3)\gamma^+ = \kappa\cos^2\theta+\gamma\sin^2\theta, \tag*{(3)}
γ−=κsin⁡2θ+γcos⁡2θ,(4)\gamma^- = \kappa\sin^2\theta+\gamma\cos^2\theta, \tag*{(4)}

and

ωd±=ωc+ωb2±(gb)2+(ωc−ωb2)2.(5)\omega_{d\pm}=\frac{\omega_c+\omega_b}{2}\pm\sqrt{(g_b)^2+\left(\frac{\omega_c-\omega_b}{2}\right)^2}. \tag*{(5)}

Meanwhile, gc+=gccos⁡θg_c^+=g_c\cos\theta and gc−=gcsin⁡θg_c^-=g_c\sin\theta are satisfied.

Then, we can recast the system Hamiltonian as below

Hℏ=(ωca−iκ)ca†ca+(ωd+−iγ+)d+†d++(ωd−−iγ−)d−†d−+gc+(d+†ca+ca†d+)+gc−(d−†ca+ca†d−).(6)\frac{H}{\hbar}=(\omega_{ca}-i\kappa)c_a^\dagger c_a+(\omega_{d+}-i\gamma^+)d_+^\dagger d_+\\ +(\omega_{d-}-i\gamma^-)d_-^\dagger d_-+g_c^+(d_+^\dagger c_a+c_a^\dagger d_+)+g_c^-(d_-^\dagger c_a+c_a^\dagger d_-). \tag*{(6)}

Here, ωd+≈ωc+gbtan⁡θ\omega_{d+}\approx\omega_c+g_b\tan\theta and gb/2πg_b/2\pi is hundreds MHz large.

For sufficiently small gcg_c, we achieve ∣ωca−ωd−∣≫gc−|\omega_{ca}-\omega_{d-}|\gg g_c^- when ωd+≈ωca\omega_{d+}\approx\omega_{ca}, and therefore, neglect the effects of the lower CMP. We find that gc/2π≤20g_c/2\pi\leq20 MHz is enough for this approximation. Subsequently, the Hamiltonian is reduced to

Heffℏ=(ωca−iκa)ca†ca+(ωd+−iγ+)d+†d++gc+(d+†ca+ca†d+).(7)\frac{H_{\mathrm{eff}}}{\hbar}=(\omega_{ca}-i\kappa_a)c_a^\dagger c_a+(\omega_{d+}-i\gamma^+)d_+^\dagger d_++g_c^+(d_+^\dagger c_a+c_a^\dagger d_+). \tag*{(7)}

Fig. 1(g) shows the theoretical ratios of gc+/gcg_c^+/g_c and γ+/γ\gamma^+/\gamma with respect to θ\theta. γ+\gamma^+ can be approximately reduced by a factor of sin⁡2θ\sin^2\theta when κ\kappa is small whereas gc+/gcg_c^+/g_c scales linearly with cos⁡θ\cos\theta. This result shows that strong and resonant coupling between the upper CMP and auxiliary cavity modes (γ+,κa≪gc+\gamma^+,\kappa_a\ll g_c^+, ωd+≈ωca\omega_{d+}\approx\omega_{ca}) can be achieved properly selecting θ\theta and gcg_c. A gray vertical line indicates our experimental regime. Although we focus on the regime of gc+>γ+g_c^+>\gamma^+ and γ+/γ≪1\gamma^+/\gamma\ll1 in this study, one can also in situ enter intermediate and weak coupling regimes by tuning θ\theta and ωb\omega_b.

Fig. 1(h) shows the numerically calculated transmission spectrum ∣S21∣2|S_{21}|^2 of the tripartite system. Here, we set ωca/2π=4.3\omega_{ca}/2\pi=4.3 MHz, κa/2π=0.8\kappa_a/2\pi=0.8 MHz, and gc/2π=10g_c/2\pi=10 MHz, while the remaining parameters are kept identical to those in Fig. 1(c). The result reveals a hierarchical coupling structure, where an secondary anti-crossing, corresponding with H^eff\hat{H}_{\mathrm{eff}}Eq. (7), formed along one of the primary branches. The absence of the upper branch in the secondary anti-crossing is attributed to the formation of a dark mode, arising from the assumption that both cavities are coupled to the same feedline. This characteristic feature is also observed in the experiments discussed later. This demonstrates the feasibility of substantially enhancing system’s utility as an effective coupled-mode Hamiltonian. This exhibits a distinct dispersive-to-resonant transition whereas the primary anti-crossing becomes almost faint at the resonance.

See Supplementary Materials for the details on the all theoretical derivations and numerical calculations.

Cavity magnonics with CrCl3

In this section, we present characterizing experiments of vdW CM with a single microwave mode as a preliminarily step before introducing the tripartite configuration. The sample is mounted in a cryostat with temperature under T=3T=3 K. Strong coupling (gb>γg_b>\gamma) is achievable using sufficiently thick vdW flakes [37, 38] or high-spin density materials coupled to low-impedance resonators [43]. Here, we use flakes (∼20 μm\sim20\,\mu\mathrm{m}) of CrCl3 and lumped-element resonators (LERs) defined on a planar. niobium films. This configuration provides us with sufficient cavity–magnon coupling strengths to implement the tripartite configuration.

In Figure 2(a) and Figure 2(b), we characterize the antiferromagnetic resonance of the CrCl3_3 and the resonators. A CrCl3_3 flake is positioned on a coplanar waveguide and secured by placing Kapton tape directly over it (inset of Figure 2(a)). We probe the differential transmission spectra (ddB∣S21∣2)\left(\frac{\mathrm{d}}{\mathrm{d}B}|S_{21}|^2\right) while scanning the in-plane magnetic field ∣B⃗∣|\vec{B}| (Figure 2(a)). We identify acoustic and optical magnon modes from the data. These modes in CrCl3_3 flakes have also been reported in previous studies [55, 56, 57]. In this work, we consider only the acoustic mode marked by the left orange arrow. Figure 2(b) shows the transmission ∣S21∣2|S_{21}|^2 of a superconducting cavity made by a LER defined on a 100 nm thick niobium film on SiO2_2 substrate. The observed downward shift in the resonance with increasing ∣B⃗∣|\vec{B}| indicates the enhanced kinetic inductance of the superconducting wire, attributable to the Cooper-pair-breaking effect induced by the magnetic field.

Characterizing cavity and magnon modes

Figure 2. Characterizing cavity and magnon modes. (a) A CrCl3 flake is placed on a copper transmission line (inset). The differential magnitude of transmission (ddB∣S21∣2\frac{d}{dB}|S_{21}|^2) with respect to probe frequency ω/2π\omega/2\pi and in-plane magnetic field ∣B⃗∣|\vec{B}| is presented, which shows the two acoustic magnon modes (orange arrows) and an optical magnon mode (dark arrow) of the CrCl3 flake. The data is taken at T=3T=3 K. (b) Transmission ∣S21∣2|S_{21}|^2 of a bare superconducting niobium lumped-element resonator (LER) measured at T=1.7T=1.7 K. The LER is capacitively side-coupled to the feedline. The resonance decreases with increasing in-plane magnetic field. The inset shows the inductor and finger capacitor part of the LER. (c) ∣S21∣2|S_{21}|^2 of an LER with a CrCl3 flake. Strong frequency splitting at ∣B⃗∣=0.1|\vec{B}|=0.1 T, where the resonator frequency matches the magnetic resonance frequency, indicates strong coupling between the resonator and the magnons of CrCl3. Black dashed curves represent fits to the data, while yellow dashed lines indicate the bare resonator and magnon modes (ωb/2π=42×∣B⃗∣\omega_b/2\pi=42\times|\vec{B}| GHz/T). We attribute the horizontal line around ωc/2π=4.69\omega_c/2\pi=4.69 GHz to an unknown stray mode of the system. (d) The cavity-magnon coupling strengths gb/2πg_b/2\pi extracted from seven measured devices. All scale bars in the insets represent 5 μm5\,\mu\mathrm{m}.

The coupling between the microwave modes and magnons of CrCl3_3 are investigated in Figure 2(c–Figure 2d). A single crystal flake of CrCl3_3 is carefully positioned on the cavities. Subsequently, we investigate the interaction between the magnetic resonance of CrCl3_3 and the superconducting cavity. Figure 2(c) clearly shows the strong coupling between the magnon and cavity modes. We fit the frequency splitting using Eq. (5). The extracted coupling rate gb/2πg_b/2\pi in this sample is estimated to be 302 MHz. We repeat the experiments on seven distinct samples and present the extracted coupling rates in Figure 2(d). gb/2πg_b/2\pi varies from sample to sample, likely due to differences in the distance between the resonator and the CrCl3_3 flake. The highest observed gb/2πg_b/2\pi in our experiments reaches 510 MHz.

Device for tripartite coupling

In Figure 3(a), we present a schematic of the device to implement the tripartite coupling in Figure 1. Multiple LERs are capacitively coupled to an RF feedline. Each LER is also coupled to their nearest neighbors. LER1 and LER2 respectively act as the cavity modes in Figure 1(b). LER3 is not directly relevant to the focus of our study and used only as a reference. A CrCl3_3 flake is positioned on the LER1 and secured with Kapton tape. Figure 3(b) presents an equivalent circuit diagram of the feedline with the LERs. Each LER has different inductance (L1L_1, L2L_2, and L3L_3) and approximately the same capacitance. Figure 3(c) displays the transmission spectra (∣S21∣2|S_{21}|^2) of resonances as a function of frequency at B=0B=0 T. As predicted, three distinct resonant frequencies are observed within the frequency range of 4.0 to 4.2 GHz. From the linewidths and dips of the resonances, we extract κ/2π≈3.0\kappa/2\pi\approx3.0 MHz, κa,u/2π≈0.8\kappa_{a,u}/2\pi\approx0.8 MHz, and

Device description

Figure 3. Device description. (a) Schematic of the device. An array of three superconducting lumped-element resonators (LERs) is coupled to a feedline. Their bare resonant frequencies are presented below (ωc\omega_c, ωca\omega_{ca}, ωcu\omega_{cu}). LER1 and LER2 serve as auxiliary and target cavity modes in Figure 1(b). We use LER3 only for reference. A CrCl3_3 flake (yellow) sits on the inductor part of LER1. (b) Equivalent circuit diagram. The LERs have different inductances L1L_1, L2L_2, and L3L_3 with the same capacitance CC. (c) The observed transmission spectrum ∣S21∣2|S_{21}|^2 of the device in (a) as a function of probe frequency. The device is cooled down to T=1.7T=1.7 K and ∣B⃗∣=0|\vec{B}|=0 T. The dips correspond to the eigenfrequencies ω~c\tilde{\omega}_c, ω~ca\tilde{\omega}_{ca}, ω~cu\tilde{\omega}_{cu} of HdevH_{\mathrm{dev}} in ∣B⃗∣=0|\vec{B}|=0 T, which are adiabatically connected to ωc\omega_c, ωca\omega_{ca}, and ωcu\omega_{cu} as gc→0g_c\to0. We extract κ/2π≈3.0\kappa/2\pi\approx3.0 MHz, κa,u/2π≈0.8\kappa_{a,u}/2\pi\approx0.8 MHz from this data. We attribute the large difference between κa,u\kappa_{a,u} and κ\kappa to the flake-transfer contamination. κa,u\kappa_{a,u} are similar to the dissipation rates of the cavities without flakes, which indicates that they are negligibly affected by the flake-induced contamination. (d) The diagram represents the modes and couplings among the modes. An optical magnon mode (bob_o) coupled to the cavity is added to the diagram.

κex/2π≈0.25\kappa_{\mathrm{ex}}/2\pi\approx0.25 MHz. Here, κex\kappa_{\mathrm{ex}} is the external coupling rate of the cavities to the feedline. κa,u\kappa_{a,u} of the auxiliary and unused cavities are similar to the dissipation rates of the cavities without flakes. The large difference between κa,u\kappa_{a,u} and κa\kappa_a is due to the contamination of the cavity while placing the flake.

The schematic diagram in Figure 3(d) illustrates the coupling mechanism between the magnon and the resonators. The auxiliary mode is coupled to the magnon of CrCl3_3 with a coupling strength gbg_b. The cavities are capacitively coupled with a coupling strength gcg_c. Here, cuc_u and bob_o are the annihilation operators of the modes not directly relevant to our study (LER3 and optical magnon mode), and ωcu\omega_{cu} and ωbo\omega_{bo} respectively indicate their bare resonant frequencies. gbog_{bo} indicates the coupling strength between the auxiliary cavity and optical magnon modes. The LER3 is capacitively coupled with auxiliary cavity with a coupling strength gcg_c.

The device Hamiltonian is then given by

Hdev=H+Hcu+Hbo.(8)H_{\mathrm{dev}} = H + H_{\mathrm{cu}} + H_{\mathrm{bo}}. \tag*{(8)}

HH is the tripartite Hamiltonian introduced in Figure 1(b). Hcu/ℏ=(ωcu−iκu)ccu†ccu+gc(ccu†cca+ccucca†)H_{\mathrm{cu}}/\hbar= (\omega_{\mathrm{cu}} - i\kappa_{\mathrm{u}})c_{\mathrm{cu}}^\dagger c_{\mathrm{cu}} + g_c(c_{\mathrm{cu}}^\dagger c_{\mathrm{ca}} + c_{\mathrm{cu}}c_{\mathrm{ca}}^\dagger) and Hbo/ℏ=(ωbo−iγo)bbo†bbo+gbo(cbo†bo+bbo†co)H_{\mathrm{bo}}/\hbar= (\omega_{\mathrm{bo}} - i\gamma_{\mathrm{o}})b_{\mathrm{bo}}^\dagger b_{\mathrm{bo}} + g_{\mathrm{bo}}(c_{\mathrm{bo}}^\dagger b_{\mathrm{o}} + b_{\mathrm{bo}}^\dagger c_{\mathrm{o}}) are the Hamiltonian contributed by the optical magnon and unused cavity modes, respectively.

Experimental realization

Figure 4(a–Figure 4b) shows the experimentally observed (a) and numerically calculated (b) transmission of the device presented in Figure 3(a) with respect to in-plane magnetic field ∣B⃗∣|\vec{B}|. Probe power in the experiment was −50-50 dBm at the device. ω~d+\tilde{\omega}_{d+}, ω~d−\tilde{\omega}_{d-}, ω~ca\tilde{\omega}_{\mathrm{ca}} and ω~cu\tilde{\omega}_{\mathrm{cu}} are eigenfrequencies of HdevH_{\mathrm{dev}}, adiabatically connected to ωd+\omega_{d+}, ωd−\omega_{d-}, ωca\omega_{\mathrm{ca}} and ωcu\omega_{\mathrm{cu}} as gc→0g_c \to0.

Experimental realization of low-loss coupled-dual-mode Hamiltonian

Figure 4. Experimental realization of low-loss coupled-dual-mode Hamiltonian. (a) The observed transmission spectrum ∣S21∣2|S_{21}|^2 of the device in Figure 3(a) as a function of probe frequency (ω/2π)(\omega/2\pi) and magnitude of in-plane magnetic field (∣B⃗∣)(|\vec{B}|) at T=1.7T = 1.7 K. ω~d+\tilde{\omega}_{d+}, ω~d−\tilde{\omega}_{d-}, ω~ca\tilde{\omega}_{ca} and ω~cu\tilde{\omega}_{cu} are eigenfrequencies of HdevH_{\mathrm{dev}}, adiabatically connected to ωd+\omega_{d+}, ωd−\omega_{d-}, ωca\omega_{ca} and ωcu\omega_{cu} as gc→0g_c \to0. (b) Calculated transmission spectrum ∣S21∣2|S_{21}|^2, which exhibits excellent agreements with the observation. (c–d) Magnification of the dashed boxes in (a) and (b). (e) Comparison of the calculated and experimental ∣S21∣2|S_{21}|^2 when the CMP and auxiliary cavity mode are resonant. The strong coupling is demonstrated between two modes, and the auxiliary cavity clearly shows its identity. (f–g) Estimated γ+/γ\gamma_+/\gamma with respect to ∣B⃗∣|\vec{B}|. (g) is the magnification of the dashed box in (f). The circles in (g–h) indicate the points when the CMP mode becomes resonant to the auxiliary cavity mode.

A clear hierarchical anti-crossing structure is observed in the resonator transmission. The secondary anti-crossing (inside dashed box) sits on one of the primary branches. The observation and calculation agree excellently with each other. From the numerical calculation, we extract gb/2π≈325g_b/2\pi\approx325 MHz and κ/2π≈3.0\kappa/2\pi\approx3.0 MHz, κa,u/2π≈0.8\kappa_{a,u}/2\pi\approx0.8 MHz, gc/2π≈5.5g_c/2\pi\approx5.5 MHz and γ/2π≈90\gamma/2\pi\approx90 MHz by comparing the observation and calculation. We use ωb/2π=42\omega_b/2\pi= 42 GHz/T ×∣B⃗∣\times|\vec{B}| in the calculation. See Supplementary Materials for the details on the numerical calculation.

Figure 4(c–Figure 4d) provide magnified views of the dashed boxes in Figure 4(a–Figure 4b). Figure 4(e) shows a line-cut when the CMP and cavity modes are on-resonant. The clear anti-crossing represents the strong and resonant coupling between the upper CMP and auxiliary cavity. The upper branch of the anti-crossing is invisible as they form a dark state to the feedline. From the anti-crossing data, the extracted coupling strength between them is gc+/2π≈5.3g_c^+/2\pi\approx5.3 MHz. The ratio gc+/gcg_c^+/g_c is consistent with the theoretical prediction.

The estimated γ+\gamma^+ with respect to ∣B⃗∣|\vec{B}| is presented in Figure 4(f) and Figure 4(g) as solid lines. Around the resonance (∣B⃗∣≈0.067|\vec{B}| \approx0.067 T), γ+\gamma^+ is an order of magnitude smaller than γ\gamma. Assuming an ideal scenario where the intrinsic losses of the auxiliary cavity are negligible (dashed line), a lower γ+\gamma^+ can be achieved for a given ∣B⃗∣|\vec{B}|. Assuming an ideal situation (κ=0\kappa= 0), γ+\gamma^+ can be further reduced.

We demonstrated a similar operation in another device featuring the same configuration as Figure 3(a). See the Supplementary Materials for the experimental data from this additional device.

Toward nonlinear coupled-mode Hamiltonian

Incorporating highly nonlinear degrees of freedom like superconducting qubits (SCQs) to the systems significantly enhances coupled-mode dynamics. Until now, the theoretical and experimental applications of SCQs in CM [7, 8, 11, 12, 13, 14] have primarily involved Yttrium Iron Garnet (YIG) crystals, leaving vdW magnets largely unexplored because of the higher damping. Here, we numerically demonstrate that our scheme is also viable with SCQs.

Fig. 5(a) shows a schematic of the proposed system. A superconducting transmon qubit [58] is capacitively coupled to a resonator. The resonator is probed by an inductively coupled feedline. At the same time, vdW flakes sit on the inductor part of the resonator. Fig. 5(b) presents a schematic description of the system including interactions. The system is identical with Figure 1(b) except that the auxiliary cavity is replaced with the transmon. The total Hamiltonian of the system is identical with Eq. (1) except that the target cavity Hamiltonian is replaced with that of the transmon, which reads

Hqℏ=(ωq−iκq)q†q−Aq2q†q†qq.\frac{H_q}{\hbar} = (\omega_q - i\kappa_q)q^\dagger q - \frac{A_q}{2}q^\dagger q^\dagger qq.

Here, ωq\omega_q, κq\kappa_q, and AqA_q are the frequency of fundamental transition, dissipation rate, and anharmonicity of the transmon. In the numerical calculation, we use ωq/2π=4.15\omega_q/2\pi= 4.15 GHz, κq/2π=1\kappa_q/2\pi= 1 MHz, Aq/2π=200A_q/2\pi= 200 MHz, and gc/2π=20g_c/2\pi= 20 MHz. These are realistic values in experiments. Particularly, κq/2π=1\kappa_q/2\pi= 1 MHz of transmons is surely achievable under in-plane magnetic field up to a few hundreds mT, as demonstrated in [59]. For the parameters on the magnons, resonator, and their coupling and dissipation rates, we use the same values obtained in Figure 4.

We numerically solve the Lindblad master equation of the total Hamiltonian including the dissipation. We solve the dynamics of the tripartite system and obtain the reduced density matrix by tracing out all but the resonator degrees of freedom. We use the Quantum Toolbox in Python (QuTiP) version 5.1.1. [60, 61]. Fig. 5(c) shows the numerically calculated transmission spectrum ∣S21∣2|S_{21}|^2 as a function of ∣B⃗∣|\vec{B}|, revealing a distinct anti-crossing between the cavity mode and the magnon frequency (ωb\omega_b, orange dashed line). The probe strength (ϵ\epsilon) used in the calculation is small enough to show the linear response. To investigate the interaction with the transmon qubit in detail, Fig. 5(d) provides a magnified view of the dashed rectangular region highlighted in Fig. 5(c). This panel demonstrates the strong coherent coupling between the transmon (ωq\omega_q) and the upper CMP mode with respect to ∣B⃗∣|\vec{B}|.

∣S21∣2|S_{21}|^2 in Fig. 5(e) highlights the explicit impact of the transmon qubit. In contrast to the case without the transmon (pink line), ∣S21∣2|S_{21}|^2 with the transmon (grey line) clearly exhibits hybridized features resulting from the coherent interaction between the transmon and CMP mode. Fig. 5(f) illustrates the nonlinear transmission responses for various drive strengths ϵ/2π\epsilon/2\pi. Compared to the linear response (grey line), increasing the drive strength to 5 MHz (pink line) and 10 MHz (green line) induces a significant deformation in the lineshape, which is directly attributed to the saturation of the transmon qubit.

See the Supplementary Materials for the details on the numerical simulation.

Conclusion

In conclusion, we have devised and experimentally demonstrated a novel tripartite hierarchical coupling architecture that effectively mitigates the critical bottlenecks of large damping rates of vdW magnets. While this study focuses on the strong coupling regime, our theoretical framework enables simultaneous tuning of coupling and dissipation, which counts to explore diverse non-Hermitian phenomena. We use a micrometer-thick CrCl₃ flake and superconducting niobium coplanar resonators for experimental realization, substantially more compact than conventional bulk crystal or array systems.

Our study establishes vdW cavity magnonics as a miniaturized, scalable, and versatile platform for investigating intriguing phenomena predicted in coupled-mode systems, including coherent perfect absorption, exceptional points, topological effects, and many others. Our scheme can be extended to any other vdW materials other than CrCl₃. with the strong coupling to microwave cavities. For instance, applying this scheme to high-spin-density vdW magnets such as Cr₂Ge₂Te₆ (CGT) will enable the utilization of nanometer-thin flakes, opening the ability to probe and exploit exotic, unprecedented 2D magnetic phenomena at the atomic scale regime. Ultimately, these results bridge the merits of vdW magnets and cavity magnonics toward ultra-compact and planar platform implementing coupled-mode physics.

Simulation of tripartite hierarchical coupling with a vdW magnet, microwave resonator, and transmon

Figure 5. Simulation of tripartite hierarchical coupling with a vdW magnet, microwave resonator, and transmon. (a) Equivalent circuit diagram of the microwave cavity inductively coupled to a feedline (ports 1 to 2) and capacitively connected to a transmon qubit. (b) Schematic diagram of the system interactions. The bare transmon (frequency of ωq\omega_q, anharmonicity of AqA_q, creation operator qq) is coupled to the cavity mode with a coupling strength gcg_c, while the cavity is coupled to the magnon mode. As in Figure 1, an effective model where the CMP is treated as a single upper CMP mode (ωd+\omega_{d+}) interacting with the transmon via an effective coupling gc+g_c^+. In the numerical calculation, we use ωq/2π=4.15\omega_q/2\pi= 4.15 GHz, κq/2π=1\kappa_q/2\pi= 1 MHz, Aq/2π=200A_q/2\pi= 200 MHz, and gc/2π=20g_c/2\pi= 20 MHz. For the parameters on the magnons, auxiliary resonator, and their coupling and dissipations, we use the same values in Figure 4. (c) ∣S21∣2|S_{21}|^2 of resonator transmission as a function of ∣B⃗∣|\vec{B}|. The orange dashed line represents the magnon frequency (ωb\omega_b), showing a clear anti crossing with the cavity mode. (d) Zoom-in view of the dashed rectangular region in (c), illustrating the interaction between the transmon (ωq\omega_q) and the CMP mode. (e) ∣S21∣2|S_{21}|^2 at a fixed magnetic field of B=0.07B = 0.07 T with (grey line) and without (pink line) the transmon qubit. (f) ∣S21∣2|S_{21}|^2 for various probe strengths ϵ/2π\epsilon/2\pi. Compared to the linear response (grey line), increasing the probe strength to 5 MHz (pink line) and 10 MHz (green line) induces a noticeable deformation in the lineshape due to the saturation of the transmon qubit.

Acknowledgements

We thank Jinuk Kim for fruitful discussions. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)(RS-2023-00213037) and Korea Research Institute of Standards and Science (KRISS-GP2026-0010-05). We also thanks for the support in device fabrication at the Nanofab, Korea Research Institute of Standards and Science. S.P. acknowledges the support from the Institute for Basic Science (IBS) in the Republic of Korea through the project IBS-R024-Y4. This work was also supported by the Mid-Career Researcher Program of the National Research Foundation of Korea (NRF) (RS-2023-NR076585), the DGIST R&D Program of the Ministry of Science and ICT (26-ET-02), the Strategic Research Program under the DGIST R&D Program of the Ministry of Science and ICT (26-SR-01, 26-SR-02, 26-SR-03) and NRF grants funded by the Korean government (MSIT & MOE) (RS-2023-00278511, RS-2023-00256050, RS-2024-00402302, RS-2025-25463923, RS-2025-02315685). B.B.Z. and T.K.M.G. were supported by the National Science Foundation Award DMR-2047214. Part of this work was supported by the Global Partnership Program of Leading Universities in Quantum Science and Technology (RS-2025-02317602). This work was also supported by the QuantERA ENTUNE project, funded by the NRF (No. RS-2026-25468343) and co-funded by the European Commission (No. 101212998). We also acknowledge the partner group program of the

@page 8/18 starts_mid=0 ends_mid=1

Simulation of tripartite hierarchical coupling with a vdW magnet, microwave resonator, and transmon

Figure 5 (PDF p. 8). Simulation of tripartite hierarchical coupling with a vdW magnet, microwave resonator, and transmon. (a) Equivalent circuit diagram of the microwave cavity inductively coupled to a feedline (ports 1 to 2) and capacitively connected to a transmon qubit. (b) Schematic diagram of the system interactions. The bare transmon (frequency of ωq\omega_q, anharmonicity of AqA_q, creation operator qq) is coupled to the cavity mode with a coupling strength gcg_c, while the cavity is coupled to the magnon mode. As in Figure 1, an effective model where the CMP is treated as a single upper CMP mode (ωd+\omega_{d+}) interacting with the transmon via an effective coupling gc+g_c^+. In the numerical calculation, we use ωq/2π=4.15\omega_q/2\pi= 4.15 GHz, κq/2π=1\kappa_q/2\pi= 1 MHz, Aq/2π=200A_q/2\pi= 200 MHz, and gc/2π=20g_c/2\pi= 20 MHz. For the parameters on the magnons, auxiliary resonator, and their coupling and dissipations, we use the same values in Figure 4. (c) ∣S21∣2|S_{21}|^2 of resonator transmission as a function of ∣B⃗∣|\vec{B}|. The orange dashed line represents the magnon frequency (ωb\omega_b), showing a clear anti crossing with the cavity mode. (d) Zoom-in view of the dashed rectangular region in (c), illustrating the interaction between the transmon (ωq\omega_q) and the CMP mode. (e) ∣S21∣2|S_{21}|^2 at a fixed magnetic field of B=0.07B = 0.07 T with (grey line) and without (pink line) the transmon qubit. (f) ∣S21∣2|S_{21}|^2 for various probe strengths ϵ/2π\epsilon/2\pi. Compared to the linear response (grey line), increasing the probe strength to 5 MHz (pink line) and 10 MHz (green line) induces a noticeable deformation in the lineshape due to the saturation of the transmon qubit.

Acknowledgements

We thank Jinuk Kim for fruitful discussions. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)(RS-2023-00213037) and Korea Research Institute of Standards and Science (KRISS-GP2026-0010-05). We also thanks for the support in device fabrication at the Nanofab, Korea Research Institute of Standards and Science. S.P. acknowledges the support from the Institute for Basic Science (IBS) in the Republic of Korea through the project IBS-R024-Y4. This work was also supported by the Mid-Career Researcher Program of the National Research Foundation of Korea (NRF) (RS-2023-NR076585), the DGIST R&D Program of the Ministry of Science and ICT (26-ET-02), the Strategic Research Program under the DGIST R&D Program of the Ministry of Science and ICT (26-SR-01, 26-SR-02, 26-SR-03) and NRF grants funded by the Korean government (MSIT & MOE) (RS-2023-00278511, RS-2023-00256050, RS-2024-00402302, RS-2025-25463923, RS-2025-02315685). B.B.Z. and T.K.M.G. were supported by the National Science Foundation Award DMR-2047214. Part of this work was supported by the Global Partnership Program of Leading Universities in Quantum Science and Technology (RS-2025-02317602). This work was also supported by the QuantERA ENTUNE project, funded by the NRF (No. RS-2026-25468343) and co-funded by the European Commission (No. 101212998). We also acknowledge the partner group program of the

Ministry of Science and ICT (26-ET-02), the Strategic Research Program under the DGIST R&D Program of the Ministry of Science and ICT (26-SR-01, 26-SR-02, 26-SR-03) and NRF grants funded by the Korean government (MSIT & MOE) (RS-2023-00278511, RS-2023-00256050, RS-2024-00402302, RS-2025-25463923, RS-2025-02315685). B.B.Z. and T.K.M.G. were supported by the National Science Foundation Award DMR-2047214. Part of this work was supported by the Global Partnership Program of Leading Universities in Quantum Science and Technology (RS-2025-02317602). This work was also supported by the QuantERA ENTUNE project, funded by the NRF (No. RS-2026-25468343) and co-funded by the European Commission (No. 101212998). We also acknowledge the partner group program of the Max Planck Society.

Large language models (Gemini Pro 3.1) were used for language editing and proofreading of this manuscript. The authors have reviewed, edited, and approved the final text and take full responsibility for the content of the publication.

Author contributions

T.K – Data curation, Formal analysis, Investigation, Resources, Writing – review & editing, S.P – Data curation, Formal analysis, Investigation, Validation, Visualization, Writing – review & editing, B.A – Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – original draft, Writing – review & editing, S.J.A – Investigation, Resources, S.S – Resources, H.K – Resources, H.S – Resources, Z.B.S – Resources, M.B.A.J – Resources, Y.K – Funding acquisition, Resources, T.K.M.G – Resources, Writing – review & editing, B.B.Z – Resources, Writing – review & editing, M.H – Investigation, Writing – review & editing, Y.M.B – Investigation, Writing – review & editing, J.S – Funding acquisition, Resources, H.C.P – Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – review & editing, M.J – Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – review & editing.

Competing interests

The authors declare no competing interests.

Data availability

Data supporting the plots within the main text of this paper is available from the corresponding author upon reasonable request.

Code availability

Code used to produce the plots within this paper is available from the corresponding author upon reasonable request.

SI.pdf

Theoretical Description {#sec:SUPPLEMENTARY NOTE 1}

Classical equation of motion for transmission

Input-output relation

Using input-output theory, we calculate the transmission spectrum ∣S21∣2|S_{21}|^2 of the circuit shown in Figure 3(d) illustrating the coupling between the magnon and the resonators. At the port jj at which the transmission line couples to the jj-th resonator, the relation between the input and output fields aj,in/outa_{j,\mathrm{in/out}} to the jj-th resonator mode

a1,out=a1,in−κex2c1,(9)a_{1,\mathrm{out}} = a_{1,\mathrm{in}} - \sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}c_1, \tag*{(9)}
a2,out=a2,in−κex2c2,(10)a_{2,\mathrm{out}} = a_{2,\mathrm{in}} - \sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}c_2, \tag*{(10)}
a3,out=a3,in−κex2c3.(11)a_{3,\mathrm{out}} = a_{3,\mathrm{in}} - \sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}c_3. \tag*{(11)}

cjc_j is the annihilation operator for the jj-th resonator mode, where κext\kappa_{\mathrm{ext}} is the external coupling rate to the transmission line. In our case, c1=cuc_1 = c_u, c2=cac_2 = c_a, and c3=cc_3 = c are satisfied. We also have relations among input/output fields like a2,in=eiΦ21a1,outa_{2,\mathrm{in}} = e^{i\Phi_{21}}a_{1,\mathrm{out}} and a3,in=eiΦ32a2,outa_{3,\mathrm{in}} = e^{i\Phi_{32}}a_{2,\mathrm{out}}, where Φ\Phi are the phase delays in probe fields due to the spatial separations of each resonator. In our case, eiΦ21=eiΦ32≈1e^{i\Phi_{21}} = e^{i\Phi_{32}} \approx1 since the separations among each LER (1–2 mm) are much shorter than the wavelength of the input and output fields (28 mm for frequency of 4.5 GHz). Note that the 1st resonator is coupled to the acoustic (bb) and optical (bob_o) magnon modes. γa,o\gamma_{a,o} refer to the damping rates of each magnon modes.

Steady state solution

The steady state equations of motions for the resonators and magnon modes in the frequency domain are given by

−iωcu=−i[ωccu+gcca]−κu2cu+κex2a1,in(12)-i\omega c_u=-i[\omega_c c_u+g_c c_a]-\frac{\kappa_u}{2}c_u+\sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}a_{1,\mathrm{in}} \tag*{(12)}
−iωca=−i[ωcca+gccu+gcc]−κex2cu−κa2ca+κex2a1,in(13)-i\omega c_a=-i[\omega_c c_a+g_c c_u+g_c c]-\frac{\kappa_{\mathrm{ex}}}{2}c_u-\frac{\kappa_a}{2}c_a+\sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}a_{1,\mathrm{in}} \tag*{(13)}
−iωc=−i[ωcc+gcca+gbb+gbobo]−κex2cu−κex2ca−κ2c+κex2a1,in(14)-i\omega c=-i[\omega_c c+g_c c_a+g_b b+g_{bo}b_o]-\frac{\kappa_{\mathrm{ex}}}{2}c_u-\frac{\kappa_{\mathrm{ex}}}{2}c_a-\frac{\kappa}{2}c+\sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}a_{1,\mathrm{in}} \tag*{(14)}
−iωb=−i(ωb−iγ2)b−igbc(15)-i\omega b=-i\left(\omega_b-i\frac{\gamma}{2}\right)b-ig_b c \tag*{(15)}
−iωbo=−i(ωbo−iγo2)bo−igboc(16)-i\omega b_o=-i\left(\omega_{bo}-i\frac{\gamma_o}{2}\right)b_o-ig_{bo}c \tag*{(16)}

gcg_c denotes the coupling among the resonators. We define gbg_b and gbog_{bo} as the coupling strengths between each magnon mode and auxiliary resonator. By plugging Eqs. (7-8) into Eq. (17), we obtain three coupled equations for three variables cuc_u, cac_a, and cc. Meanwhile, the experimentally observed transmission S21S_{21} is related with the resonator in-fields by the following equation.

S21=a3,outa1,in≈1−1a1,inκex2(c+ca+cu).(17)S_{21}=\frac{a_{3,\mathrm{out}}}{a_{1,\mathrm{in}}}\approx1-\frac{1}{a_{1,\mathrm{in}}}\sqrt{\frac{\kappa_{\mathrm{ex}}}{2}}(c+c_a+c_u). \tag*{(17)}

Derivation of Hybridized Decay Rates in the Strong Coupling Regime

To derive the explicit forms of the decay rates γ±\gamma^{\pm} for the coupled system comprised on the auxiliary cavity and magnon mode, we start with the effective non-Hermitian Hamiltonian

H=(ωc−iκgbgbωb−iγ)(18)H=\begin{pmatrix} \omega_c-i\kappa& g_b\\ g_b & \omega_b-i\gamma \end{pmatrix} \tag*{(18)}

where ωc\omega_c (ωb\omega_b) and κ\kappa (γ\gamma) are the resonance frequency and decay rate of the cavity (magnon) mode, respectively, and gbg_b is the coupling strength. We decompose the Hamiltonian into its Hermitian part H0H_0 and anti-Hermitian part HlossH_{\mathrm{loss}}:

H=H0−iHloss=(ωcgbgbωb)−i(κ00γ)(19)H=H_0-iH_{\mathrm{loss}}= \begin{pmatrix} \omega_c & g_b\\ g_b & \omega_b \end{pmatrix} -i\begin{pmatrix} \kappa& 0\\ 0 & \gamma \end{pmatrix} \tag*{(19)}

In the strong coupling regime (gb≫∣κ−γ∣g_b\gg\lvert\kappa-\gamma\rvert), the eigenmodes of the system are primarily determined by H0H_0. We diagonalize H0H_0 using a rotation matrix SS:

S=(cos⁡θsin⁡θ−sin⁡θcos⁡θ)(20)S=\begin{pmatrix} \cos\theta& \sin\theta\\ -\sin\theta& \cos\theta \end{pmatrix} \tag*{(20)}

where the mixing angle θ\theta is defined by the relation:

tan⁡(2θ)=2gbωc−ωb(21)\tan(2\theta)=\frac{2g_b}{\omega_c-\omega_b} \tag*{(21)}

Applying this transformation to H0H_0 yields the hybridized frequencies ωd±\omega_{d\pm} as the diagonal elements:

SH0ST=(ωd+00ωd−)(22)SH_0S^{T}= \begin{pmatrix} \omega_{d+} & 0\\ 0 & \omega_{d-} \end{pmatrix} \tag*{(22)}

Next, we transform the loss matrix HlossH_{\mathrm{loss}} into the hybridized basis:

Hloss′=SHlossST=(κcos⁡2θ+γsin⁡2θ12(γ−κ)sin⁡(2θ)12(γ−κ)sin⁡(2θ)κsin⁡2θ+γcos⁡2θ)(23)H'_{\mathrm{loss}}=SH_{\mathrm{loss}}S^{T}= \begin{pmatrix} \kappa\cos^2\theta+\gamma\sin^2\theta& \frac{1}{2}(\gamma-\kappa)\sin(2\theta)\\ \frac{1}{2}(\gamma-\kappa)\sin(2\theta) & \kappa\sin^2\theta+\gamma\cos^2\theta \end{pmatrix} \tag*{(23)}

The total Hamiltonian in the hybridized basis becomes:

H′=SHST=(ωd+−iγ+iγ′−iγ′ωd−−iγ−)(24)H' = SHS^T = \begin{pmatrix} \omega_{d+} - i\gamma^+ & i\gamma' \\ -i\gamma' & \omega_{d-} - i\gamma^- \end{pmatrix} \tag*{(24)}

Under the condition of strong coupling, the frequency splitting ∣ωd+−ωd−∣|\omega_{d+} - \omega_{d-}| significantly exceeds the off-diagonal damping terms γ′\gamma'. In this limit, the secular approximation allows us to neglect the off-diagonal terms. Consequently, the effective decay rates κ±\kappa_{\pm} of the hybridized modes (CMPs) are given by the diagonal elements of Hloss′H'_{\mathrm{loss}}:

γ+≈κcos⁡2θ+γsin⁡2θγ−≈κsin⁡2θ+γcos⁡2θ(25)\begin{aligned} \gamma^+ &\approx\kappa\cos^2 \theta+ \gamma\sin^2 \theta\\ \gamma^- &\approx\kappa\sin^2 \theta+ \gamma\cos^2 \theta \tag*{(25)} \end{aligned}

This representation provides a physical intuition where the hybridized decay rates are weighted averages of the original constituent decay rates, governed by the mixing angle θ\theta.

Quantum equation of motion

The total Hamiltonian of the system presented in Fig. 5(a) of the main text, consisting of a superconducting transmon qubit, an auxiliary resonator, and a magnon mode, is given by

H=H0+Hint+Hprobe,(26)H = H_0 + H_{\mathrm{int}} + H_{\mathrm{probe}}, \tag*{(26)}

where H0H_0 represents the free Hamiltonian of each component and HintH_{\mathrm{int}} describes the coherent energy exchange between them. HprobeH_{\mathrm{probe}} describes the probe tone. The dissipation terms will be added in the other form later. The free Hamiltonian H0H_0, including the transmon’s anharmonicity AqA_q, is

H0=ωqq†q−Aq2q†q†qq+ωcc†c+ωbb†b,(27)H_0 = \omega_q q^\dagger q - \frac{A_q}{2}q^\dagger q^\dagger qq + \omega_c c^\dagger c + \omega_b b^\dagger b, \tag*{(27)}

where qq, cc, bb (q†q^\dagger, c†c^\dagger, b†b^\dagger) are the annihilation (creation) operators for the transmon, resonator, and magnon modes. The interaction Hamiltonian is

Hint=gb(b†c+bc†)+gc(c†q+cq†).(28)H_{\mathrm{int}} = g_b(b^\dagger c + bc^\dagger) + g_c(c^\dagger q + cq^\dagger). \tag*{(28)}

Here, gbg_b is the coupling strength between the magnon and the auxiliary resonator, and gcg_c is the one between the the auxiliary resonator and the transmon. Meanwhile, the probe Hamiltonian with strength ϵ\epsilon reads

Hprobe=iϵ(c†e−iωt−ceiωt).(29)H_{\mathrm{probe}} = i\epsilon(c^\dagger e^{-i\omega t} - ce^{i\omega t}). \tag*{(29)}

We then perform a unitary operation U^rot(t)=e−iωt(q^†q^+c^†c^+b^†b^)\hat{U}_{\mathrm{rot}}(t) = e^{-i\omega t(\hat{q}^\dagger\hat{q}+\hat{c}^\dagger\hat{c}+\hat{b}^\dagger\hat{b})} on H^\hat{H} to move on to the frame where the Hamiltonian becomes time-independent. In this frame, HH is transformed to H′H' that reads

H′=(ωq−ω)q†q−Aq2q†q†qq+(ωc−ω)c†c+(ωb−ω)b†b+gb(b†c+bc†)+gc(c†q+cq†)+iϵ(c†−c).(30)H' = (\omega_q - \omega)q^\dagger q - \frac{A_q}{2}q^\dagger q^\dagger qq + (\omega_c - \omega)c^\dagger c + (\omega_b - \omega)b^\dagger b + g_b(b^\dagger c + bc^\dagger) + g_c(c^\dagger q + cq^\dagger) + i\epsilon(c^\dagger- c). \tag*{(30)}

To account for the interaction with the environment, we use the Lindblad master equation for the density matrix of the tripartite system ρ\rho

dρdt=−i[H′,ρ]+∑LD[L]ρ(31)\frac{d\rho}{dt} = -i[H', \rho] + \sum_L \mathcal{D}[L]\rho \tag*{(31)}

where the dissipator is defined as D[L]ρ=LρL†−12{L†L,ρ}\mathcal{D}[L]\rho= L\rho L^\dagger- \frac{1}{2}\{L^\dagger L,\rho\}. In our case, the master equation becomes

dρdt=−i[H′,ρ]+κqD[q]ρ+κaD[c]ρ+γD[b]ρ(32)\frac{d\rho}{dt} = -i[H', \rho] + \kappa_q\mathcal{D}[q]\rho+ \kappa_a\mathcal{D}[c]\rho+ \gamma\mathcal{D}[b]\rho \tag*{(32)}

where κq\kappa_q, κa\kappa_a, and γ\gamma are the dissipation rates of the transmon, auxiliary cavity and magnon modes, respectively.

Numerical Simulation

Classical dynamics

To calculate S21S_{21}, we use np.linalg.solve function of NumPy library. Below, we present the Python script used for the calculation for the tripartite configuration. The parameters are adjusted to emulate the real experiment presented in the main text.

import numpy as np

# Unit : 2pi * GHz , Tesla.

g_c       = 0.0055
g_ma      = 0.325
g_mo      = 0.025
omega0_cu = 4.194    # Bare frequency of the unused cavity.
omega0_ca = 4.109    # Bare frequency of the auxiliary cavity.
omega0_c  = 4.015    # Bare frequency of the cavity.
k_ext     = 0.00025
k_u       = 0.00080  # Damping rate of the unused cavity.
k_a       = 0.00080  # Damping rate of the auxiliary cavity.
k         = 0.00300  # Damping rate of the cavity.
gamma_a   = 0.090
gamma_o   = 0.010

def calculate(omega, B, a_in):
    omega_b = 42 * B
    if 4.5**2 - 150 * B**2 > 0:
        omega_bo = np.real(np.sqrt(4.5**2 - 150 * B**2))
    else:
        omega_bo = 0

    omega_1 = omega0_cu - 0.05*B**2 - 0.25*B**4
    omega_2 = omega0_ca - 0.06*B**2 - 0.25*B**4
    omega_3 = omega0_c  - 0.17*B**2 - 0.75*B**4

    # Constructing the 3 x 3 linear system A * c = B
    A = [
        [-1j*omega + 1j*omega_1 + k_u/2, -1j*g_c, -1j*g_c],
        [-1j*g_c + k_ext/2, -1j*omega + 1j*omega_2 + k_a/2, -1j*g_c],
        [k_ext/2 - 1j*g_c, -1j*g_c + k_ext/2,
         -1j*omega + 1j*omega_3 + k/2
         + 1j*g_bo*(-1j*g_bo/(1j*(omega_bo-omega) + gamma_o/2))
         + 1j*g_b*(-1j*g_b/(1j*(omega_b-omega) + gamma_a/2))]
    ]

    B = [np.sqrt(k_ext/2)*a_in, np.sqrt(k_ext/2)*a_in, np.sqrt(k_ext/2)*a_in]

    A = np.asarray(A)
    B = np.asarray(B)

    C = np.linalg.solve(A, B)

    return C[0], C[1], C[2]    # c1 , c2 , c3 , respectively

Listing 1. Python code for calculating the resonator mode amplitudes by solving the coupled linear system.

Quantum dynamics

To numerically calculate the transmission spectrum and the steady-state populations of the cavity-magnon-transmon system, we utilized the Quantum Toolbox in Python (QuTiP) version 5.1.1, a Python library designed for numerical quantum simulation. The steady-state density matrix ρss\rho_{\mathrm{ss}} is obtained by solving the Lindblad master equation. The following Python script details the construction of the Hamiltonian, the corresponding collapse operators, and how to solve the ρss\rho_{\mathrm{ss}}.

import numpy as np
from qutip import *

# Unit : 2pi * GHz , Tesla.

def spectroscopy(omega_p_list, eps, B):

    Nq = 3
    Nc = 5
    Nm = 5
    omega_q   = 4.15
    omega_c   = 4.0 - 0.05*B**2 - 0.25*B**4
    omega_b   = 42 * B
    Anh       = 0.2

    kappa_q   = 0.0010
    kappa_c   = 0.0025
    gamma     = 0.0900

    g_b       = 0.40
    g_c       = 0.02

    q = tensor(destroy(Nq), qeye(Nc), qeye(Nm))
    c = tensor(qeye(Nq), destroy(Nc), qeye(Nm))
    b = tensor(qeye(Nq), qeye(Nc), destroy(Nm))

    num_q = q.dag()*q
    num_c = c.dag()*c
    num_b = b.dag()*b

    transmission=[]

    nth_q = 0.0
    nth_c = 0.0
    nth_b = 0.0

    H0 = (omega_q)*num_q + (omega_c)*num_c + (omega_b)*num_b \
         - 0.5*Anh*q.dag()*q.dag()*q*q \
         + g_b*(c.dag()*b + c*b.dag()) \
         + g_c*(c.dag()*q + c*q.dag()) \
         - 1j*eps*(c.dag() - c)

    c_ops = []
    c_ops.append(np.sqrt(kappa_q*(nth_q+1))*q)
    c_ops.append(np.sqrt(kappa_q*(nth_q))*q.dag())
    c_ops.append(np.sqrt(kappa_c*(nth_c+1))*c)
    c_ops.append(np.sqrt(kappa_c*(nth_b))*c.dag())
    c_ops.append(np.sqrt(gamma*(nth_b+1))*b)
    c_ops.append(np.sqrt(gamma*(nth_b))*b.dag())

    transmission = []
    magnon_num  = []
    photon_num  = []

    for omega_p in omega_p_list:

        H  = H0
        H -= omega_p *num_q
        H -= omega_p *num_c
        H -= omega_p *num_b

        rho_ss = steadystate(H, c_ops)
        transmission.append((expect(c, rho_ss)))
        magnon_num.append((expect(num_b, rho_ss)))
        photon_num.append((expect(num_c, rho_ss)))

    return np.array(transmission), np.array(magnon_num), np.array(photon_num)

Listing 2. Python code for calculating the steady-state spectroscopy of the system using QuTiP.

Additional Experimental Data

Figure S1–Figure S1) shows the experimentally observed (a) and numerically calculated (b) transmission of the additional device, which has the same configuration as in Figure 3(a) in the main text. The observed and calculated spectra agree excellently with each other. In the numerical calculation, we use gb/2π=270 MHzg_b/2\pi= 270\ \mathrm{MHz}, gbo/2π=25 MHzg_{bo}/2\pi= 25\ \mathrm{MHz}, κ/2π=3.5 MHz\kappa/2\pi= 3.5\ \mathrm{MHz}, κa,u/2π=1.5 MHz\kappa_{a,u}/2\pi= 1.5\ \mathrm{MHz}, κex/2π=0.35 MHz\kappa_{\mathrm{ex}}/2\pi= 0.35\ \mathrm{MHz}, gc/2π=10 MHzg_c/2\pi= 10\ \mathrm{MHz} and γ/2π=150 MHz\gamma/2\pi= 150\ \mathrm{MHz} by comparing the observation and calculation. We use ωb/2π=42 GHz/T×∣B⃗∣\omega_b/2\pi= 42\ \mathrm{GHz}/\mathrm{T} \times\lvert\vec{B}\rvert in the calculation. Figure S1–Figure S1) provide magnified views near the secondary anti-crossings. The clear avoid-crossing represents the strong and resonant coupling between the upper CMP and target cavity modes. The upper branch of the avoid-crossing is invisible as they form a dark state to the feedline. The extracted coupling strength between them is gc+/2π≈9.7 MHzg_c^+/2\pi\approx9.7\ \mathrm{MHz}.

Additional data

Figure S1. Additional data. (a) The observed transmission spectrum ∣S21∣2|S_{21}|^2 of the additional device with the same configuration in Figure 3(a) of the main text. ∣S21∣2|S_{21}|^2 is plotted with respect to probe frequency (ω/2π)(\omega/2\pi) and the magnitude of the in-plane magnetic field (∣B⃗∣)(|\vec{B}|) at the temperature T=1.7T = 1.7 K. (b) Calculated transmission spectrum ∣S21∣2|S_{21}|^2, which exhibits excellent agreements with the observation. (c–d) Magnification near the secondary anti-crossing. The orange lines in (a–d) is the magnon resonance frequency ωb\omega_b. (e–f) Estimated γ+/γ\gamma^{+}/\gamma with respect to ∣B⃗∣|\vec{B}| from the values used in the numerical simulation in (b) and (d). The circles indicate the points when the secondary aviod crossing is on-resonant.

The estimated γ+\gamma^+ with respect to ∣B⃗∣\lvert\vec{B}\rvert is presented in Figure S1 and Figure S1 as solid lines. Around the resonance (∣B⃗∣≈0.09 T\lvert\vec{B}\rvert\approx0.09\ \mathrm{T}), γ+\gamma^+ is an order of magnitude smaller than γ\gamma. Assuming an ideal scenario where the intrinsic losses of the cavity are negligible (dashed line), a lower γ+\gamma^+, and consequently, a larger cooperativity can be achieved for the given ∣B⃗∣\lvert\vec{B}\rvert. The circles in Figure S1 points when the secondary anti-crossing becomes on-resonant.

References

  1. [1]H. Huebel et al., High cooperativity in coupled microwave resonator ferrimagnetic insulator hybrids, Phys. Rev. Lett. 111, 127003 (2013).
  2. [2]X. Zhang, C. L. Zou, L. Jiang, and H. X. Tang, Strongly coupled magnons and cavity photons in a YIG sphere, Phys. Rev. Lett. 113, 156401 (2014).
  3. [3]R. Hisatomi et al., Bidirectional conversion between microwave and light via ferromagnetic magnons, Phys. Rev. B 93, 174427 (2016).DOI
  4. [4]M. Harder, B. M. Yao, Y. S. Gui, and C.-M. Hu, Coherent and dissipative cavity magnonics, J. Appl. Phys. 129, 201101 (2021).DOI
  5. [5]B. Z. Rameshti et al., Cavity magnonics, Phys. Rep. 979, 1 (2022).
  6. [6]Y. Tabuchi et al., Hybridizing ferromagnetic magnons and microwave photons in the quantum limit, Phys. Rev. Lett. 113, 083603 (2014).DOI
  7. [7]Y. Tabuchi et al., Coherent coupling between a ferromagnetic magnon and a superconducting qubit, Science 349, 405 (2015).DOI
  8. [8]D. Lachance-Quirion et al., Entanglement-based single-shot detection of a single magnon with a superconducting qubit, Science 367, 425 (2020).
  9. [9]C. Fruy et al., Observation of strong tripartite coupling in a cavity-quantum circuit-antiferromagnet platform, Nat. Mater. (2026)DOI
  10. [10]H. Y. Yuan, Y. Cao, A. Kamra, R. A. Duine, and P. Yan, Quantum magnonics: When it meets quantum information science, Phys. Rep. 965, 1 (2022).
  11. [11]D. Xu, X.-K. Gu, H.-K. Li, Y.-C. Weng, Y.-P. Wang, J. Li, H. Wang, S.-Y. Zhu, and J. Q. You, Quantum Control of a Single Magnon in a Macroscopic Spin System, Phys. Rev. Lett. 130, 193603 (2023).DOI
  12. [12]S. Rani, X. Cao, A. E. Baptista, A. Hoffmann, and W. Pfaff, High-dynamic-range quantum sensing of magnons and their dynamics using a superconducting qubit, Phys. Rev. Appl. 23, 064032 (2025).DOI
  13. [13]M. Kounalakis, G. E. W. Bauer, and Y. M. Blanter, Analog Quantum Control of Magnonic Cat States on a Chip by a Superconducting Qubit, Phys. Rev. Lett. 129, 037205 (2022).DOI
  14. [14]M. Kounalakis, S. V. Kusminskiy, and Y. M. Blanter, Engineering entangled coherent states of magnons and phonons via a transmon qubit, Phys. Rev. B 108, 224416 (2023).arxiv.org/abs/2309.16514
  15. [15]I. Boˇventer, C. Dörflinger, T. Wolz, R. Macêdo, R. Lebrun, M. Kläui, and M. Weides, Control of the coupling strength and linewidth of a cavity magnon-polariton, Phys. Rev. Research. 2, 013154 (2020).
  16. [17]J. W. Rao et al., Interferometric control of magnon-induced nearly perfect absorption in cavity magnonics, Nat. Comm 12, 1933 (2021).DOI
  17. [18]R.-C. Shen et al., Cavity-magnon polaritons strongly coupled to phonons, Nat. Comm 16, 5652 (2025).DOI
  18. [19]D. Zhang, X.-Q. Luo, Y.-P. Wang, T.-F. Li, and J. Q. You, Observation of the exceptional point in cavity magnon-polaritons, Nat. Comm 8, 1368 (2017).DOI
  19. [20]G.-Q. Zhang and J. Q. You, Higher-Order Exceptional Points in Feedback-Coupled Cavity Magnonics, Phys. Rev B 99, 054404 (2019).
  20. [21]N. J. Lambert, A. Schumer, J. J. Longdell, S. Rotter, and H. G. L. Schwefel, Coherent control of magnon-polaritons using an exceptional point, Nat. Phys 21, 1570 (2025).DOI
  21. [22]Z.-Q. Wang, Z.-Y. Wang, Y.-P. Wang, and J. Q. You, Single-mode magnon-polariton lasing and amplification controlled by dissipative coupling, Phys. Rev. Lett. 135, 186704 (2025).DOI
  22. [23]J. Qian, J. Li, S.-Y. Zhu, J. Q. You, and Y.-P. Wang, Probing PT-Symmetry Breaking of Non-Hermitian Topological Photonic States via Strong Photon-Magnon Coupling, Phys. Rev. Lett. 132, 156901 (2024).DOI
  23. [24]P.-C. Sun, Q. Hong, Z.-H. Meng, X. Zhang, Y. Zhang, Z. Guo, and Y.-P. Wang, Strong coupling between magnons and Anderson-localized microwave photons, APL Quantum 3, 036112 (2026).DOI
  24. [25]A. Ghirri, C. Bonizzoni, M. Maksutoglu, A. Mercurio, O. Di Stefano, S. Savasta, and M. Affronte, Ultrastrong Magnon-Photon Coupling Achieved by Magnetic Films in Contact with Superconducting Resonators, Phys. Rev. Appl. 20, 024039 (2023).DOI
  25. [26]S. Guo, D. Russell, J. Lanier, H. Da, P. C. Hammel, and F. Yang, Strong on-Chip Microwave Photon–Magnon Coupling Using Ultrallow-Damping Epitaxial Y3Fe5O12 Films at 2 K, Nano Lett. 23, 5126 (2023).DOI
  26. [27]M. Harder, Y. P. Cao, P. Y. Gui, X. L. Fan, and C.-M. Hu, Level Attraction Due to Dissipative Magnon-Photon Coupling, Phys. Rev. Lett. 121, 137203 (2018).DOI
  27. [28]C. Zhang, C. Jia, Y. Shi, C. Jiang, D. Xue, C. K. Ong, and G. Chai, Nonreciprocal multimode and indirect couplings in cavity magnonics, Phys. Rev. B 103, 184427 (2021).DOI
  28. [29]C. Zhang, Z. Hao, Y. Shi, X. Li, C. Jiang, C. K. Ong, D. Gao, and G. Chai, Simultaneous realization of nonreciprocal and ultra-strong coupling in cavity magnonics, npj Spintron. 3, 45 (2025).DOI
  29. [30]G. Bourcin, M. Avicena, V. Vlaminck, J. Bourhill, and V. Castel, Multi-mode input–output model for cavity magnonics: Phase-resolved control of level repulsion, level attraction, and nonreciprocal transmission, APL Quantum 3, 036111 (2026).
  30. [31]C. Gong et al., Discovery of intrinsic ferromagnetism in two-dimensional van der Waals crystals, Nature 546, 265 (2017).
  31. [32]B. Huang et al., Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit, Nature 546, 270 (2017).DOI
  32. [33]M. A. McGuire et al., Magnetic behavior and spin-lattice coupling in cleavable van der Waals layered structure of CrCl3, Phys. Rev. Materials 1, 014001 (2017).arxiv.org/abs/1706.01796
  33. [34]K. S. Burch, D. Mandrus, and J.-G. Park, Magnetism in two-dimensional van der Waals materials, Nature 563, 47 (2018).DOI
  34. [35]T. Zhang et al., Magnetically-dressed CrSBr exciton-polaritons in ultrastrong coupling regime, Nat. Commun. 14, 5966 (2023).arxiv.org/abs/2302.07616
  35. [36]J.-G. Park, K.-X. Zhang, H. Cheong, J. H. Kim, C. A. Belvin, D. Hsieh, H. Ning, and N. Gedik, 2D van der Waals magnets: From fundamental physics to applications, Rev. Mod. Phys. 98, 025003 (2026).DOI
  36. [37]S. Mandal et al., Coplanar cavity for strong coupling between photons and magnons in van der Waals antiferromagnet, Appl. Phys. Lett. 117, 263101 (2020).DOI
  37. [38]Q. Zhang et al., Zero-field magnon–photon coupling in antiferromagnet CrCl3, Appl. Phys. Lett. 119, 102402 (2021).DOI
  38. [39]C. W. Zollitsch et al., Probing spin dynamics of ultra-thin van der Waals magnets via photon-magnon coupling, Nat. Commun. 14, 2619 (2023).DOI
  39. [40]J. M. Lee, M.-J. Hwang, and H.-W. Lee, Topological magnon-photon interaction for cavity magnonics, Comm. Phys 6, 194 (2023).DOI
  40. [41]J. Tang et al., Coherent Magnon-Photon Coupling in the Magnetic Semiconductor CrSBr, Nano Lett. 25, 10912 (2025).DOI
  41. [42]S. Mandal et al., Cavity based sensing of antiferromagnetic canting and nonzero-magnon spin waves in a van der Waals cavity-magnon-polariton system, Phys. Rev. B 112, 214443 (2025).DOI
  42. [43]A. Bermejillo-Seco, L. J. van der Goot, M. Arfini, Y. M. Blanter, G. A. Steele, H. S.J. van der Zant, Magnon polaritons in a van der Waals ferrimagnet coupled to a superconducting resonator, arXiv preprint arXiv:2605.12298 (2026).
  43. [44]Y. Deng et al., Gate-tunable room-temperature ferromagnetism in two-dimensional Fe3GeTe2, Nature 563, 94 (2018).DOI
  44. [45]J. Cenker et al., Reversible strain-induced magnetic phase transition in a van der Waals magnet, Nat. Nanotechnol. 17, 256 (2022).
  45. [46]F. Fei et al., Spin-Mechanical Coupling in 2D Antiferromagnet CrSBr, Nano Lett. 24, 10467 (2024).DOI
  46. [47]G. Chen et al., Electrically switchable van der Waals magnon valves, Nat. Commun. 12, 6279 (2021).
  47. [48]B. Datta et al., Magnon-mediated exciton-exciton interaction in a van der Waals antiferromagnet, Nat. Mater. 23, 512 (2024).DOI
  48. [49]J. Long, H. S. Ku, X. Wu, X. Gu, R. E. Lake, M. Bal, Y. Liu, and D. P. Pappas, Electromagnetically induced transparency in circuit quantum electrodynamics with nested polariton states, Phys. Rev. Lett. 120, 083602 (2018).DOI
  49. [50]A. D. Wright, J. C. Nelson, and M. L. Weichman, A versatile platform for gas-phase molecular polaritonics, J. Chem. Phys. 158, 124304 (2023).DOI
  50. [51]P. Hyde, L. Bai, M. Harder, C. Match, and C.-M. Hu, Indirect coupling between two cavity modes via ferromagnetic resonance, Appl. Phys. Lett. 109, 152405 (2016).DOI
  51. [52]N. Kostylev, M. Goryachev, and M. E. Tobar, Super-strong coupling of a microwave cavity to yttrium iron garnet magnons, Appl. Phys. Lett. 108, 062402 (2016).
  52. [53]X. Zhang, C. Zou, L. Jiang, and H. X. Tang, Superstrong coupling of thin film magnetostatic waves with microwave cavity, J. Appl. Phys. 119, 023905 (2016).DOI
  53. [54]D. L. Esteras, A. Rybakov, A. M. Ruiz, and J. J. Baldoví, Magnon Straintronics in the 2D van der Waals Ferromagnet CrSBr from First-Principles, Nano Lett. 22, 8771 (2022).DOI
  54. [55]D. MacNeill et al., Gigahertz ferromagnetic resonance in the easy-plane anisotropy 2D van der Waals antiferromagnet CrCl3, Phys. Rev. Lett. 123, 047204 (2019).
  55. [56]X. Wang et al., Atomically thin CrCl3: An in-plane layered antiferromagnet insulator, Nano Lett. 19, 4620 (2019).DOI
  56. [57]L. N. Kapoor et al., Observation of Standing Spin Waves in a van der Waals Magnetic Material, Adv. Mater. 33, 2005105 (2021).DOI
  57. [58]J. Koch et al., Charge-insensitive Qubit Design Derived from the Cooper Pair Box, Phys. Rev. A 76, 042319 (2007).DOI
  58. [59]J. Krause et al., Magnetic Field Resilience of Three-Dimensional Transmons with Thin-Film Al/AlOₓ/Al Josephson Junctions Approaching 1 T, Phys. Rev. Appl. 17, 034032 (2022).
  59. [60]J. R. Johansson, P. D. Nation, and F. Nori, QuTiP: An open-source Python framework for the dynamics of open quantum systems, Comp. Phys. Comm. 183, 1760 (2012).
  60. [61]J. R. Johansson, P. D. Nation, and F. Nori, QuTiP 2: A Python framework for the dynamics of open quantum systems, Comp. Phys. Comm. 184, 1234 (2013).

Paper details

vlnc:W_v2yfp6hd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Gemini 3.1 Pro (bare)

View statement
Looking for related papers…
Contents