betaFeedback

WorksPhysics and Astronomy

Out-of-equilibrium interactions and collective locomotion of colloidal spheres with squirming of nematoelastic multipoles

Abstract

Many living and artificial systems show a similar emergent behavior and collective motions on different scales, starting from swarms of bacteria to synthetic active particles, herds of mammals and crowds of people. What all these systems often have in common is that new collective properties like flocking emerge from interactions between individual self-propelled or externally driven units. Such systems are naturally out-of-equilibrium and propel at the expense of consumed energy. Mimicking nature by making self-propelled or externally driven particles and studying their individual and collective motility may allow for deeper understanding of physical underpinnings behind the collective motion of large groups of interacting objects or beings. Here, using a soft matter system of colloids immersed into a liquid crystal, we show that resulting so-called nematoelastic multipoles can be set into a bidirectional locomotion by external periodically oscillating electric fields. Out-of-equilibrium elastic interactions between such colloids lead to collective flock-like behaviors, which emerge from time-varying elasticity-mediated interactions between externally driven propelling particles. The repulsive elastic interactions in the equilibrium state can be turned into attractive interactions in the out-of-equilibrium state under applied electric fields. We probe this behavior at different number densities of colloidal particles and show that particles in a dense dispersion collectively select the same direction of a coherent motion due to elastic interactions between near neighbors. In our experimentally implemented design, their motion is highly ordered and without clustering or jamming often present in other colloidal transport systems, which is promising for technological and fundamental-science applications, like nano-cargo transport, out-of-equilibrium assembly and microrobotics.

Introduction

Emergent collective behavior of constituent units in different systems is a thriving interdisciplinary area of research. Researchers aspire to establish a detailed description of the collective motion of living organisms, self-propelled or driven objects on different scales. Collective motion involves numerous interacting units that perform coherent motion [1, 2, 3]. The motility of the units can be self-generated as in living organisms [4], chemically-driven [5] or externally induced as in different colloidal systems [6, 7, 8, 9, 10, 11, 12, 13, 14]. Developments in fabrication techniques allow for design of numerous synthetic colloids that exhibit a coherent propulsion in isotropic suspensions [5, 8, 15, 16, 17]. As one of the fascinating types of active matter, some microorganisms are known to be roughly spherical in their shape, yet capable of swimming by continuously asymmetrically perturbing/deforming their shape, say via beating arrays of cilia on their surface; an example of such a microorganism is a ciliate like Opalina [18]. A squirming model inspired by this behavior has been used to understand various aspects of the biological locomotion, where nonreciprocal surface profile evolution with respect to the static quasispherical shape gives origins to the self-propulsion.

In nematic colloidal systems, colloidal particles with various surface boundary conditions are known for inducing multipolar elastic deformations of the molecular alignment field, ranging from dipoles and quadrupoles to hexadecapoles and even higher-order multipoles [19, 20, 21, 22, 23, 24, 25, 26], which pre-determine the nature of energy-minimizing elasticity-mediated colloidal interactions under equilibrium conditions. Reconfigurations of colloidal nematoelastic multipoles were previously demonstrated, allowing one to switch from attractive to repulsive forces between colloidal microparticles [27], back and forth, as well as cause colloidal spinning [28]. Could controlled morphing of such particle-induced deformations of the aligned director field lead to colloidal particle propulsion in the nematic fluid hosts? If so, how would the out-of-equilibrium elasticity-mediated interactions between such spheres differ from their equilibrium counterparts, including their reconfigurations by external stimuli?

This article focuses on electric-field induced out-of-equilibrium dynamic properties and collective behavior of colloidal spheres immersed into a nematic liquid crystal (LC), which is a fluid with properties anisotropic with respect to a LC director n(r)\mathbf{n}(\mathbf{r}) describing the average local orientation of rodlike LC molecules (29). We study these colloid-LC dispersions experimentally in a homeotropic (boundary conditions for n(r)\mathbf{n}(\mathbf{r}) are perpendicular to the confining substrates) nematic LC cell and show that a bi-directional locomotion of colloidal particles can be activated by driving periodic nonreciprocal evolutions of the director field around them in response to the oscillating electric field applied between confining substrates with transparent electrodes. This results in a squirming motion of the colloids resembling the squirming motion of quasiparticle-like topological solitons in chiral LCs and other soft matter systems [30, 31, 32, 33, 34]. In recent decades, LC’s orientational elasticity mediated interactions between colloids were studied extensively under equilibrium conditions [12, 19, 20, 23, 24, 25, 26, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44], whereas here we show that an oscillating electric field can cause an out-of-equilibrium evolution of elastic multipoles and a switch from repulsive to attractive elastic interactions between colloids, which would typically only repel under equilibrium conditions [19, 23, 25, 41]. Elastic interactions between particles emerge to reduce the free energy cost due to n(r)\mathbf{n}(\mathbf{r}) distortions around them, albeit here this happens without the dynamic n(r)\mathbf{n}(\mathbf{r}) fully reaching equilibrium because of the voltage modulation and ensuing colloidal motions. Such dynamic colloidal elastic multipoles with reconfigurable nature of induced elastic multipole moments can mutually repel or attract, where anisotropic interactions between them can be tuned by changing the voltage driving scheme. We probe the behavior of colloidal particles at the different number density and find that, at the higher number density, they show coherent uni-directional motion. The transition from bi-directional locomotion in dilute dispersions to a uni-directional locomotion in dense dispersions is caused by particles “sensing” the presence of their active-particle neighbors through interactions mediated by orientational LC elasticity. Under the applied electric field in dense dispersions, colloids collectively select the same direction of locomotion without clustering, jamming or clogging as in other colloidal systems [45, 46]. The direction of collective motion of colloids can be changed with respect to the predefined tilt of the director, which can be used for the development of different driven, active [47, 48], and other out-of-equilibrium self-reconfigurable systems, microrobotics [49, 50] and many other technological applications. Our findings also provide new insights into colloidal LCs and their assembly, out-of-equilibrium and collective behavior, as well as may enable new technological uses of nematic colloids.

Results

Colloidal Spheres in a Homeotropic Nematic Cell. Before proceeding with collective out-of-equilibrium effects in nematic colloids, we first study them as isolated objects under energy-minizing conditions. When a melamine resin colloidal spherical particle (SP) with tangential surface anchoring is immersed into a nematic LC, it distorts an otherwise homogeneous director field n(r)\mathbf{n}(\mathbf{r}) in the surrounding bulk, forming what is known as an elastic quadrupole [19, 23, 24, 25, 26, 41]. The quadrupolar configuration of n(r)\mathbf{n}(\mathbf{r}) around SPs [23] arises from the mismatch of the preset homogeneous far-field director n0\mathbf{n}_0 in the LC cell and the tangential alignment of LC molecules at the SP’s surface. Arising from the minimization of free energy, the ensuing director distortions are axially symmetric with respect to an axis parallel to n0\mathbf{n}_0 and have also a mirror symmetry with respect to the plane normal to n0\mathbf{n}_0 and passing through SP’s equator. There are two surface point defects called “boojums” located at the opposite poles of SP along n0\mathbf{n}_0 [23, 25] and facing the substrates in a homeotropic cell (Figure 1A, Figure 2A and Figure 3A), where n0\mathbf{n}_0 is set normal to substrates by aligning surface treatment at confining plates (Materials and Methods). As a consequence of a thickness of the homeotropic cell h=5.5h = 5.5 µm in our experiments being only slightly larger than a diameter D0=2R0=3D_0=2R_0=3 µm of SPs, the director distortions induced by particles are partially suppressed by a strong anchoring at confining plates and do not propagate over large distances as in a bulk nematic LC [23, 51]. Furthermore, the interaction of such particles with confining substrates can be also understood by invoking analogies with electrostatics, where strong boundary conditions prompt the emergence of effective “image quadrupoles” [38] and lead to particles repelling from the confining substrates. Typically, a balance between elastic repulsion from the walls of the confining substrates and gravitational force Fg=(4/3)πR03Δρg≈0.07F_g = (4/3)\pi R_0^3\Delta\rho g \approx0.07 pN, where g=9.8g = 9.8 m s−2^{-2} is gravitational acceleration and Δρ≈500\Delta\rho\approx500 kg m−3^{-3} is a difference between densities of melamine resin SPs and LC, determines a vertical position of colloidal particles in LC cells. However, due to the tight confinement in our thin LC cells, such small symmetry-breaking contribution of FgF_g can be neglected so that the SP’s vertical position is determined mainly by a force of elastic repulsion from the confining walls, which can reach tens of piconewtons [35] with a corresponding repulsive potential from hundreds to thousands of kBTk_B T (here TT is temperature and kBk_B is the Boltzmann constant) [38, 51]. Thus, elastic forces prevent sedimentation of SPs, so that they stay centered between two substrates as the elastic repulsion from both walls is about equal due to a symmetry of quadrupolar n(r)\mathbf{n}(\mathbf{r})-distortions around the particle (Figure 1A, Figure 3A). Tangential boundary conditions at SPs were confirmed by optical microscopy observations (Figure 1B-D), where the quadrupolar n(r)\mathbf{n}(\mathbf{r})-distortions can be seen between crossed polarizers as SPs encircled by a sequence of four bright lobes separated by four narrow dark regions (Figure 1C). A full wave (λ=530\lambda= 530 nm) phase retardation plate with a slow axis γ\gamma placed after a sample at 45° between crossed polarizers (Figure 1D, Figure 2B) allows for determining the azimuthal orientation of the in-plane projection of a tilted director at the SP’s surface based on the interference colors in an experimental texture. Interference colors within the LC texture are blue or yellow when the in-plane projection is respectively parallel or perpendicular to γ\gamma. The sequence of interference colors in the experimental textures (Figure 1D) confirms that the projections of the tilted director are distributed around SP accordingly to planar boundary conditions. The calculated polarizing microscopy textures without and with a retardation plate (Figure 3D,E) based on the calculated quadrupolar configuration of n(r)\mathbf{n}(\mathbf{r}) (Figure 3A) are in a good agreement with experimental observations (Figure 1C,D).

Figure 1. Elastic quadrupoles in a homeotropic nematic cell in an equilibrium state. (A) Schematic diagram of an elastic quadrupole and surrounding director field (green lines) in a homeotropic cell. Black hemispheres at the poles of a particle show a surface point defects “boojums” Top and bottom confining substrates are slightly rubbed respectively in er,t\mathbf{e}_{r,t} and er,b\mathbf{e}_{r,b} directions. (B–D) Microscopy micrographs of an elastic quadrupole obtained using (B) bright-field and polarizing microscopy without (C) and with (D) a phase retardation plate after the sample; A, P and γ\gamma mark respectively crossed analyzer and polarizer and a “slow” axis of a phase retardation plate. (E and F) Bright-field microscopy micrographs showing a pair (E) and a 2D array of multiple (F) particles. (G) Color coded trajectory of Brownian motion of an elastic quadrupole in the plane of a homeotropic cell. Color coded bar shows an elapsed time. (H) Histograms of displacements in the plane of a cell along the x and y directions. Solid lines show a Gaussian fit to the data (open symbols). (I) Log−log (Top) and linear (Bottom) plots of mean-square displacement (MSD) measured for a single elastic quadrupole moving (B) freely well separated from neighbors and (F) within an array of elastic quadrupoles in a homeotropic cells with h=5.5 μmh=5.5\,\mu\mathrm{m}. Experimental data were fitted using the expression MSD=4Dtottα\mathrm{MSD}=4D_{\mathrm{tot}}t^{\alpha} (51). Diffusion of a single free elastic quadrupole (B) corresponds to the Brownian motion with α=1\alpha=1 but the elastic quadrupole within an array (F) shows subdiffusive motion (α<1\alpha<1) due to suppressed mobility caused by elastic repulsion from neighbors. (J) Histogram of separations between elastic quadrupoles in a pair (E) and in an array (F).

Electric field induced locomotion of colloidal particles in a homeotropic nematic cell

Figure 2. Electric field induced locomotion of colloidal particles in a homeotropic nematic cell. (A) Schematic diagram of a director field around a particle shown in (B) under an applied voltage. Ellipses represent the LC molecules. The pointing in two opposite directions solid and dashed arrows corresponding to forward v1v_1 (blue), reverse v2v_2 (green) and net vnetv_{\mathrm{net}} (orange) displacements show that the locomotion along er\mathbf{e}_r is equally probable in both directions but the direction is preserved during motion after selected by a particle upon switching a voltage on. (B) Polarizing optical micrographs of LC textures around a particle moving under the applied voltage taken without (Left) and with (Right) a phase retardation plate. (C) Displacement of a particle over time at 0≤U2/U1≤0.50 \le U_2/U_1 \le0.5 and U2/U1=0U_2/U_1 = 0 waveforms of the applied voltage (shown as the insets) at fm=2.1f_m = 2.1 Hz. Applying the former waveform results in the net directional locomotion of the colloidal particle and there is no locomotion when applying the latter. A waveform of applied low frequency voltage asymmetric with respect to a zero level marked by a red line in the top right inset can also result in the net directional locomotion of the colloidal particle. Solid lines are the best linear fits to experimental displacements. (D) Waveform of an applied voltage that induces locomotion of particles with low modulation frequency fm=2.1f_m = 2.1 Hz and high carrier frequency fc=1f_c = 1–1010 kHz. For the purpose of demonstration, fcf_c in a plot is represented by a lower frequency. (E) Plot showing the detailed displacements of a particle under the applied voltage similar as shown in (D) resulting in a locomotion with a net velocity vnetv_{\mathrm{net}}. Solid lines show the linear fit of trajectory fragments corresponding to

Figure 3. Director transformations around a particle. (AA-CC,FF-HH) Computer-simulated n(r)\mathbf{n}(\mathbf{r}) in the vertical plane zz-yy going through the middle of the particle (AA,FF) and contours marking area around the particle where the deviations of ny=±0.03n_y=\pm0.03 (BB,CC,GG,FF) respectively without (AA-CC) and with (FF-HH) voltage applied. Rods in AA and FF represent the director field. (DD,EE,II,JJ) Corresponding computer-simulated microscopy micrographs for polarizing microscopy without (DD,II) and with (EE,JJ) a phase retardation plate after the sample; AA, PP and γ\gamma mark respectively crossed analyzer and polarizer and a “slow” axis of a phase retardation plate. (KK,LL) Calculated elastic multipole moments dependent on the applied voltage for a particle with (KK) a strong (W0=10−3W_0=10^{-3} J m−2^{-2}) and (LL) weak (W0=10−5W_0=10^{-5} J m−2^{-2}) surface anchoring.

In the equilibrium state, at no electric fields applied, elastic quadrupoles (Figure 1A, Figure 3A) drift freely in the plane of the cell due to the Brownian motion (Figure 1G) with displacements independent of the in-plane direction (Figure 1H), which confirms that a slight rubbing of alignment layers along er\mathbf{e}_{r} (Figure 1A) in our experimental cells does not impede the directionality of particles free diffusion. The vertical displacements are suppressed due to a strong elastic repulsion from both substrates. The simplest motion of a Brownian SP can be described by its mean square displacement (MSD) as a function of time MSD=4Dtottα\mathrm{MSD}=4D_{\mathrm{tot}}t^{\alpha} with a diffusion coefficient DtotD_{\mathrm{tot}} (Figure 1I). Even though an isolated particle in a dilute SPs-LC dispersion shows a linear self-diffusion with α=1\alpha=1 (Figure 1I), its lateral motion is strongly hindered by the tight confinement with a gap of h≈1.8D0h\approx1.8D_{0}. Using optical microscopy tracking of the Brownian motion of an isolated SP, one can determine a diffusion coefficient Dtot=7.55×10−4 μm2 s−1D_{\mathrm{tot}}=7.55 \times10^{-4}\ \mathrm{\mu m}^{2}\,\mathrm{s}^{-1} of in-plane diffusion [23, 42, 52], which is more than 2.5 times smaller than a diffusion coefficient Dcalc=19.5×10−4 μm2 s−1D_{\mathrm{calc}}=19.5 \times10^{-4}\ \mathrm{\mu m}^{2}\,\mathrm{s}^{-1} calculated for a similar but defect-free particle moving in an isotropic liquid with a viscosity η=75 mPa s\eta=75\ \mathrm{mPa}\,\mathrm{s} of a LC using the Stokes-Einstein expression Dcalc=kBT(6πηR0)−1D_{\mathrm{calc}}=k_{\mathrm{B}}T(6\pi\eta R_{0})^{-1} (53). This significant difference shows that the strong surface anchoring at confining walls in a thin cell gap decreases the mobility of SPs because of the strong elastic coupling of n(r)n(\mathbf{r})-distortions around SPs to confining substrates. In concentrated SPs-LC dispersions, particles tend self-arranging into two-dimensional arrays (Figure 1F) with inter-particle distances determined by the number density of SPs and elastic repulsion between elastic quadrupoles (Figure 1J). Their lateral displacements become confined in transient cages formed by interactions with neighboring particles, which prevents them from diffusing freely throughout the sample. Thus, the thermal motion of a single SP in a concentrated dispersion becomes sub-diffusive with α<1\alpha< 1 (Figure 1I). A mean square displacement of SPs in concentrated dispersions is influenced not only by confinement between walls but also by elastic interactions with neighbors leading to a collective diffusion [54, 55]. A pair of isolated elastic quadrupoles in a dilute dispersion experience repulsive interactions which keep them apart at some distance around 12 μ\mum or larger due to elastic repulsion (Figure 1E and 1J).

Locomotion of Colloidal Spheres. We observed that upon applying voltage with a square waveform shown in Figure 2D, SPs start a bi-directional locomotion along a rubbing direction er\mathbf{e}_{r} (Figure 2B–E, Movies S1 and S2). Due to a negative dielectric anisotropy Δε=−4.8\Delta\varepsilon= -4.8 of a used nematic LC, the director n(r)\mathbf{n}(\mathbf{r}) tends to reorient orthogonally to an electric field applied across the cell (Figure 2A). Therefore, if an applied voltage UU that is larger than a threshold voltage UthU_{\mathrm{th}} of the Fréedericksz transition [29], the director far from the particle tilts away from its initial homeotropic orientation by an angle depending on the voltage value (Figure 2A,Figure 3F). It is important to mention that preexisting deformations of n(r)\mathbf{n}(\mathbf{r}) around SP make the tilt of n(r)\mathbf{n}(\mathbf{r}) threshold-free so that further reorientation of the pre-deformed director structure is thresholdless. In our system, the direction of a n(r)\mathbf{n}(\mathbf{r})-tilt is macroscopically homogeneous because of rubbing [56] along er\mathbf{e}_{r} on the top substrate er,t\mathbf{e}_{r,t} and on the bottom substrate er,b\mathbf{e}_{r,b} (Figure 2A), which also effectively “smoothens” the threshold-like switching one would expect far from particles for purely perpendicular boundary conditions. The rubbing-defined direction of n(r)\mathbf{n}(\mathbf{r})-tilt along er\mathbf{e}_{r} was confirmed using conoscopic observations [57].

An applied voltage used in experiments has a square waveform (Figure 2C,D) and with an amplitude alternating between U1U_{1} and U2U_{2} peak values at low modulation frequency fmf_{m} and a 50% duty cycle, with 0<U2/U1≤0.50 < U_{2}/U_{1} \le0.5 (Figure 2D). To make sure that observed effects are unrelated to ion electrokinetic transport, and to guarantee that we avoid effects associated with transport of ions at applied electric fields of low-frequency fmf_m, we also used a high carrier frequency fc=1f_c=1–1010 kHz. When, during the first half-cycle of a square wave, a voltage U1>UthU_1>U_{\mathrm{th}} is applied across the LC cell (Figure 2D), n(r)\mathbf{n}(\mathbf{r}) tilts along er\mathbf{e}_r away from n0∥z\mathbf{n}_0\parallel\mathbf{z} and towards the yy-axis (Figure 2A,Figure 3F). The deformed configuration of the director around the particle loses the quadrupolar symmetry, whereas a resulting nematoelastic multipole morphs. This can be observed from the polarizing microscopy images, especially with a retardation plate: note the change in the sequence of yellow and blue colors around the particles without and with voltage applied (compare Figure 1D and Figure 2B), which is in agreement with numerical modelling (compare Figure 3E and Figure 3J). Effectively, visible distortions areas around SPs become larger, as can be seen from microscopy micrographs in Figure 2B (compare Figure 1C,D and 2B). The evolution of director distortions around the particles is also confirmed by theoretical calculations (compare Figure 3B,C and G,H). The nonreciprocal director evolution during this switching prompts the particle to move either along yy or −y-y direction with velocity v1v_1. In the other half-cycle of a square wave, when the voltage is changed to U2≤U1/2U_2\leq U_1/2, the director tends rotating back to n0∥z\mathbf{n}_0\parallel\mathbf{z} and nematoelastic multipole morphs/rotates accordingly back to the original orientation. This also drives particles to move along er\mathbf{e}_r but in the reverse direction back to the original position with velocity v2v_2. The reorientation of the director depends on the strength of the electric field [29] and in the first half-cycle, when U1>UthU_1>U_{\mathrm{th}}, it is faster than in the second half-cycle at a lower effective voltage (U2≤U1/2U_2\leq U_1/2). The velocity v2v_2 is smaller in the second half cycle of the applied signal when U2≤U1/2U_2\leq U_1/2 as can be seen from the experiment (Figure 2E). The angular trajectories of electrically-driven and elastic-relaxation-driven director rotations within the two parts of the voltage modulation period are different. As a result, such non-reciprocal reorientation of n(r)\mathbf{n}(\mathbf{r}) in both half-cycles causes a difference in magnitude and velocity of the forward and reverse displacements and a full cycle gives some small net forward displacement. The repeated periodic switching between U1U_1 and U2U_2 results in a directional net “squirming”-like [30, 31, 32, 33, 34] motion of SPs along er\mathbf{e}_r (Figure 2C-E, Movies S1 and S2). The used voltage driving scheme is designed to produce an asymmetric deformation and maintain the director field asymmetry while the amplitude of the applied electric field is modulated to yield the squirming motion of the elastic colloidal multipole.

We characterized the particles’ motion using tracking video microscopy. Tracking SPs and measuring velocity v1≈3.6v_1\approx3.6 μm/s in the first half-cycle of the applied voltage (Figure 2E), a propulsion force $F_1 pushing a particle forward along er\mathbf{e}_r can be found by balancing it (because of low Reynolds number) with a Stokes force as F1=(kBT/Dtot)v1≈20F_1=(k_B T/D_{\mathrm{tot}})v_1\approx20 pN. During the second half-cycle with U2<U1/2U_2<U_1/2, n(r)\mathbf{n}(\mathbf{r}) reorients back to an initial orientation along n0\mathbf{n}_0 and a particle is pushed back towards the original position with a force F2=(kBT/Dtot)v2≈7F_2=(k_B T/D_{\mathrm{tot}})v_2\approx7 pN. The periodic forward and reverse displacements of SP with different velocity v1>v2v_1>v_2, periodic change of the effective volume of nematoelastic multipoles (Figure 3B,C,G,H) and non-reciprocal relaxation of n(r)\mathbf{n}(\mathbf{r}) during two half cycles of a square-wave signal result in a net directional “squirming” motion [30, 31, 32, 33, 34] along er\mathbf{e}_r with a velocity vnetv_{\mathrm{net}}, which can reach up to 1-2 μ\mum/s (Figure 2C,E,F) depending on parameters of applied voltage. Apparent or net velocities of SPs are low enough that the Ericksen number Er=γviR0/K\mathrm{Er}=\gamma v_i R_0/K is much smaller than 1, where γ\gamma and index ii indicates forward, reverse or net motion. This small Er means that n(r)\mathbf{n}(\mathbf{r}) is not modified by a flow of a LC fluid during their directional motion. Because of symmetry of n(r)\mathbf{n}(\mathbf{r})-distortions with respect to the equator of SPs (Figure 2A), in dilute samples where particles are far apart from each other, they can select to move in either directions yy or −y-y, along er\mathbf{e}_r in Figure 2A,B. The initial displacement either along yy or −y-y direction is selected by SPs arbitrarily upon the initial switching a voltage on and it determines a further SPs’ motion direction. The rubbing er\mathbf{e}_r does not introduce significant pretilt into the homeotropic alignment of n(r)\mathbf{n}(\mathbf{r}), which can be verified by lateral displacements independent of the in-plane direction (Figure 1H) and conoscopic microscopy. Therefore, at the moment when the square-wave voltage with a fast rise-time is turned on, there is no strongly defined or preferred azimuthal direction of a tilt for n(r)\mathbf{n}(\mathbf{r}) and it is tilting in multiple directions especially in the area close to the particle as n(r)\mathbf{n}(\mathbf{r}) was already pretilted there radially due to the quadrupolar symmetry of distortions around it. The preferred homogeneous tilt along er\mathbf{e}_r establishes within several first cycles after the square-wave voltage being applied. The tilting dynamics at the moment of switching the voltage on can be confirmed by conoscopic observations. This symmetry-breaking event is responsible for the locomotion direction selected by a particle at the moment of turning the voltage on. Small irregularities at the particle’s surface, apparent small differences of the director field near the opposite poles of the particles due to Brownian translational displacements across the cell and angular displacements at the moment of turning the voltage on can also contribute to breaking the symmetry and determining the direction of motion for each particle. The net velocity vnetv_{\mathrm{net}} shows a maximum at the frequency fmf_m of about two Hertz (Figure 2F). Decreasing the frequency from the one corresponding to the maximum vnetv_{\mathrm{net}} allows enough time for the tilted director to relax nearly completely to the preset vertical alignment and a particle to move back to the original position, which decreases a net displacement and vnetv_{\mathrm{net}}. Decreasing of vnetv_{\mathrm{net}} at higher frequencies is caused by decreasing the time for relaxation of n(r)\mathbf{n}(\mathbf{r}) during either half-cycle of the applied oscillating voltage and as a result decreasing the forward and reverse displacements of particles and difference between them.

Turning the modulated voltage off completely allows for re-starting the selection of particle’s locomotion direction. However, we found that the velocity directionality can be also altered during the motion via a kinetic out-of-equilibrium process even without fully turning off the modulated voltage. Figure 2G-I show that the locomotion direction can be changed (Movie S3) by decreasing and increasing U2U_2. First, when a waveform with U2/U1=1/3U_2/U_1=1/3 is used, a particle moves in one direction (Figure 2G,H). Decreasing U2U_2 causes the particle to slow down and stop the directional locomotion when U2=0U_2=0 (U2/U1=0U_2/U_1=0); it just makes small, about equal displacements in both directions with no net locomotion (Figure 2C). Upon further change of the waveform to the state when again U2/U1=1/3U_2/U_1=1/3, the particle restarts directional locomotion but it may select to move in the reverse direction (Figure 2G,I). The new direction depends on the particle’s state and displacements direction at the moment when the applied voltages ratio becomes U2/U1=1/3U_2/U_1=1/3 again. Thus, one can keep changing the locomotion direction of the particle by changing voltage waveforms applied to the LC cell (Figure 2G and Movie S3). Importantly, as can be checked with applying waveforms with high carrier frequency like in Figure 2D, the dynamic physical behavior of the nematic colloidal system is nonpolar, with motion direction generally insensitive to voltage polarity, and stems from nonreciprocal nature of LC’s director evolution in applied time-varying electric field.

Details of periodic voltage induced director transformations around the particles leading to their squirming-like motion are revealed by numerical calculations (Figure 3). The near-particle region of distortions around a particle in the tilted n(r)\mathbf{n}(\mathbf{r}) increases at the applied voltage (compare Figure 3B,C and 3G,H). The distortions, initially axially symmetric without a voltage applied, also lose their axial symmetry because the tilt of the director at the surface of the particle with respect to the electric field induced tilt of the director in the surrounding bulk is different around the particle. In the images showing n(r)\mathbf{n}(\mathbf{r}) deviations (Figure 3G,H) at applied electric field, the red contours show areas where the tilt of the director at the surface of the particle is opposite to the director tilt induced by the electric field in the surrounding bulk. This leads to increased effective volume of the distortions around the particle. The observed in experiments and numerical calculations periodic change of effective shape and size of the nematoelastic multipole around particles and non-reciprocal relaxation of n(r)\mathbf{n}(r)-distortions at U1U_1 and U2U_2 states result in a squirming-like locomotion of particles (Figure 2). During the periodic change of the director tilt in the bulk the nematoelastic multipoles transform accordingly to the changing n(r)\mathbf{n}(r). Even the general behavior of nematoelastic multipoles with increasing voltage is similar for particles with strong and weak anchoring (Figure 3K,L), the strength of nematoelastic multipole moments is smaller for the particles with weak surface anchoring (Figure 3L). This difference is caused by director distortions decay due to LC elasticity and action of the electric field. It is interesting to note that one can observe small changes in multipole moments even before electric field reaches a critical value of about 1.1 V. This finding is related to the fact that even without a voltage applied, there are preexisting deformations of n(r)\mathbf{n}(r) around the particle, which makes it threshold-free and further reorientation is thresholdless and happens even at small voltages. The calculated corresponding polarizing microscopy micrographs (Figure 3D,E,I,J) are in an excellent agreement with experimental observations (Figure 1C,D and 2B) and detect well the corresponding director transformations and change of the color sequence at off (compare Figure 1D and Figure 3E) and on (compare Figure 2B and Figure 3I,J) states.

Out-of-Equilibrium Interactions of Nematoelastic Multipoles. Pair interactions of elastic quadrupoles embedded in an infinitely large homogeneous LC depend on the orientation of a separation vector rcc\mathbf{r}_{\mathrm{cc}} with respect to n0\mathbf{n}_0 [23]. If there is no external voltage applied, elastic quadrupoles in our system stay well separated (Figure 1E,F) even in the concentrated dispersions due to the elastic repulson between them as rcc⊥n0\mathbf{r}_{\mathrm{cc}} \perp\mathbf{n}_0 (Figure 4A). When the electric field is applied and SPs are set to motion, as was described above, quadrupolar n(r)\mathbf{n}(r)-distortions around SPs transform into more complex nematoelastic multipoles (Figure 3), so that they start to interact attractively and form pairs and chains of multiple particles (Figure 4A, Movie S4). The external field drives our system out of equilibrium while changing repulsive interactions into dynamic attractive interactions between particles. Under the effect of an applied electric field, director tilts making nematoelastic multipoles rotate as well. However, in the tilted nematic LC in a homeotropic cell rcc\mathbf{r}_{\mathrm{cc}} between nematoelastic multipoles is not orthogonal with the director any longer and effectively makes an angle θ<90∘\theta<90^\circ with local n(r)\mathbf{n}(\mathbf{r}), prompting them to attract when the amplitude of the applied voltage is larger than UthU_{\mathrm{th}}. Optical microscopy textures (Figure 2B) reveal that nematoelastic multipoles are rotating following the director tilt (compare the change of orientation of blue and yellow lobes in textures with a phase retardation plate in Figure 1D and Figure 2B). In a nematic LC, elastic pair interactions between two elastic quadrupoles are strongly repulsive when θ=0∘\theta=0^\circ and 90∘90^\circ and strongly attractive when θ=35∘\theta=35^\circ-45∘45^\circ but weak attraction is also present at about θ=20∘\theta=20^\circ or 70∘70^\circ [19, 23]. Therefore, it is possible to estimate that the tilt of the director during application of the voltage in the cell midplane is somewhere between 20∘20^\circ and less than 45∘45^\circ from the vertical orientation, which also can be verified via the conoscopic observations. Figure 4C shows decreasing of rccr_{\mathrm{cc}} between two nematoelastic multipoles with time under the applied voltage. After forming a pair or chains, SPs continue the directional locomotion without changing the direction along er\mathbf{e}_r (Figure 4A, Movies S4 and S5) with a speed vtotv_{\mathrm{tot}}, which is an average of speeds of individual particles.

Out-of-equilibrium pair interactions of particles

Figure 4. Out-of-equilibrium pair interactions of particles. (A) Sequence of bright-field microscopy images showing a time evolution of out-of-equilibrium attractive pair interaction between two particles in a homeotropic nematic cell upon applying the ac electric field. (B) Schematic diagrams showing the director field around two interacting particles corresponding to experimental images in (A). (C) Plots showing a time evolution of separation rccr_{\mathrm{cc}} for the pair interactions between two particles under applied voltage (U≠0U \ne0 at fm=3f_{\mathrm{m}}=3 Hz) and no voltage applied. A green solid line is the best fit to experimental data of elastic repulsion between two elastic quadrupoles when an applied voltage is switched off with rcc=(r07+7βt)1/7r_{\mathrm{cc}}=(r_{0}^{7}+7\beta t)^{1/7} for r0=3.7r_{0}=3.7 μ\mum and β=6.05×10−3\beta=6.05 \times10^{-3} μm7\mu\mathrm{m}^{7} s−1^{-1} [27, 39]. A vertical dashed line separates regions when voltage is on and off. (D) Log-log plot of an interaction force FintF_{\mathrm{int}} versus separation between elastic quadrupoles corresponding to repulsive elastic interactions in (C). A red line is a best fit to a power-law exponent of 6.0±0.26.0 \pm0.2 corresponding to quadrupolar elastic interactions [19, 23]. A vertical dashed line indicates the boundary of the fitting region with a value indicated at the top.

When an applied voltage is switched off, the pairs and chains of nematoelastic multipoles formed in the out-of-equilibrium regime stop moving, transform back to quadrupolar-like configurations and disassemble (Figure 4A, Movies S4 and S5). This is because n(r)\mathbf{n}(\mathbf{r}) relaxes back to the vertical alignment and an angle between rcc\mathbf{r}_{\mathrm{cc}} and n0\mathbf{n}_0 again becomes close to θ=90∘\theta=90^\circ, corresponding to the strong elastic repulsion between quadrupoles (Figure 4B,C). Figure 4C and Figure 4D show, respectively, the increasing of the separation between particles with time and decreasing of an interaction force of elastic repulsion FintF_{\mathrm{int}} with distance. According to the multipole expansion models [23, 58], a force of elastic interactions between repelling elastic quadrupoles follows a power law behavior Fint∝rcc−6F_{\mathrm{int}}\propto r_{\mathrm{cc}}^{-6}, with the proportionality coefficients depending on the LC elastic constants and anchoring at the particle’s surface. The experimental dependance of FintF_{\mathrm{int}} on separation rccr_{\mathrm{cc}} can be fit with a power-law exponent of 6.0±0.26.0\pm0.2 (Figure 4D) and corresponding separation dependence (Figure 4C) can be fit well with rcc=(r07+7βt)1/7r_{\mathrm{cc}}=(r_0^7+7\beta t)^{1/7} for the separation r0=3.7r_0=3.7 μm\mu\mathrm{m} at time t=0t=0 s and β=6.05×10−3\beta=6.05\times10^{-3} μm7\mu\mathrm{m}^7 s−1^{-1} [27, 39]. The force, right after elastic quadrupoles started to repel from each other, was found to be about 6 pN, which corresponds to energy of about 1,500 kBTk_{\mathrm{B}}T comparable to those measured for spherical colloids of comparable size in other works [12, 19, 20, 25, 36, 37, 39]. The possible deviation from the power law dependence of the interparticle forces may be caused by the confinement because longrange SP-induced deformations of the director are suppressed due to the strong anchoring on the substrate walls [51].

Collective Locomotion of Colloidal Spheres. As was described above, because n(r)\mathbf{n}(\mathbf{r})-distortions are symmetric with respect to the equator of SPs (Figure 2A, Figure 3F), when elastic quadrupoles are far apart from each other in dilute samples, the direction of locomotion along er\mathbf{e}_{r} is selected by individual SPs arbitrarily upon switching voltage on. Some SPs move along er,t\mathbf{e}_{r,t} (yy) and some along er,b\mathbf{e}_{r,b} (−y-y) directions. The situation changes drastically in dispersions of the higher number density when SPs are surrounded by multiple neighbors at relatively close distances (Figure 1F). In concentrated samples, SPs start “sensing” presence of the neighbors through interactions caused by orientational elasticity of LC (Figure 1I,J). Even though, distortions of n(r)\mathbf{n}(\mathbf{r}) around SPs are suppressed (screened) due to the surface anchoring in the tight confinement [51], SPs start interacting in our samples at relatively large distances of about 10-20 μ\mum (Figure 1E,F, 4C, 5, Movie S5). Therefore, upon switching a voltage on in concentrated samples, SPs select the same direction collectively and all move in that same direction due to elastic interactions (Figure 5, Movie S5) and electric field driven out-of-equilibrium interactions (Figure 4). The majority of particles move with a narrow distribution of speeds (Figure 5C), depending on voltage and other parameters, with few outliers due to sticking to the surface, imperfections or aggregation. Chains of multiple SPs move with an average speed of individual particles in a chain, which sometimes can be seemingly faster than that of surrounding single particles. In dilute samples, with particles far apart, colloids can move in two opposite directions, yy or −y-y (Movie S2). In the concentrated regime (Figure 1F), all particles, due to synchronization via elastic interactions, move in a single spontaneously selected direction, which resembles the flocking behaviour [1, 2, 3]. At any time, the amount of the order and directionality of collective locomotion of particles in our electric field driven system can be measured by an average velocity as the instantaneous velocity order parameter va(t)v_a(t) = ∣∑jv0exp⁡(iφj(t))∣/Nv0\left|\sum_j v_0 \exp\left(i\varphi_j(t)\right)\right|/Nv_0, where v0v_0 is a speed of a particle and φj\varphi_j is an instantaneous angle between er\mathbf{e}_r and the direction of motion of the jjth particle. In our system, all SPs move in one direction with a high order of va≈0.87v_a \approx0.87 (Figure 5E,F, Movie S5). After the driving voltage is switched off, SPs repel and disassemble from chains moving from each other to distances determined by elastic repulsive interactions and a number density of SPs (Figure 5D).

Emergent collective locomotion of particles in a homeotropic nematic cell

Figure 5. Emergent collective locomotion of particles in a homeotropic nematic cell. (A) Bright-field micrograph of multiple particles assembling into a 2D structure at higher number density. (B) Colour coded trajectories of particles shown in (A) moving along a rubbing direction er\mathbf{e}_{r} when a voltage U1=6U_{1}=6 V (U2/U1=1/3U_{2}/U_{1}=1/3) at fm=2.5f_{m}=2.5 Hz was applied. Colour coded bar shows elapsed time after application of voltage. (C) Distance versus time showing a speed distribution of moving particles in (A and B). (D) Distribution of repelling particles before an application of an electric field. (E) Directional locomotion of particles driven by an applied voltage at the high number density. Single particles and their chains move in one direction along er\mathbf{e}_{r}. (F) Velocity order parameter of particles moving in (E) over time. A solid line is a linear fit to data (open symbols) indicating an average velocity order parameter.

Differently from the collective schooling-like squirming motion of skyrmions in chiral LC systems [33, 34], our colloidal particles can move at lower frequency fmf_{\mathrm{m}} (Figure 2F) while the direction of locomotion can be reversed by restarting an applied voltage or changing the waveform of an applied voltage between U2/U1≤0.5U_{2}/U_{1}\leq0.5 and U2/U1=0U_{2}/U_{1}=0 (U2=0U_{2}=0) (Figure 2G-I) unlike by changing the frequency for skyrmion motion [59].

Discussion and Conclusions

In summary, we have experimentally studied electrically powered dynamic properties of colloidal particles with tangential boundary conditions dispersed in a homeotropic nematic LC cells of thickness just slightly larger than the diameter of colloids. Our findings show such particles can be set into bi-directional locomotion under the applied oscillating electric field of special waveforms. The net “squirming”-like locomotion of particles is caused by periodic transformations of the surrounding director field and resulting forward and backward displacements of particles with different velocity and non-reciprocal relaxation of the surrounding director during two half cycles of a pre-designed oscillating electric field. Moreover, driving voltage also controls the out-of-equilibrium anisotropic elastic interactions between particles, which elastically repel under equilibrium conditions.

We also show that at higher number density of particles, when they “sense” the presence of neighbor particles through interactions mediated by LC elasticity they show a collective emergent behavior in that there is a transition from bi-directional locomotion to a unidirectional locomotion. In a ”collective” mode, under the applied electric field, colloids collectively select the same direction of locomotion with a high velocity order. As important feature for using in micro delivery and transportation, during the observed collective locomotion, particles in our system do not exhibit jamming or clogging [45, 46] normal to the direction of locomotion preventing colloids from continuous motion and reaching the destination.

Our findings can be used for the development of different driven, active [47, 48], and other out-of-equilibrium self-reconfigurable systems, microrobotics [49, 50] and other technological applications. They also provide new insights into nematic LC colloids and their self-assembly, out-of-equilibrium and collective behavior. While our focus in this work was on spherical colloids, the out-of-equilibrium behavior of nematic colloids can be further enriched by using particles with various geometric shapes that can be also electrically rotated around multiple axes of symmetry breaking [60], thus potentially allowing for different directionality of motions within a uniformly aligned nematic host.

Materials and Methods

Sample Preparation. A room temperature nematic LC ZLI-2806 (EMD Electronics) with negative dielectric anisotropy Δε=−4.8\Delta\varepsilon=-4.8 was used in our experiments as a host medium for colloidal particles. We used melamine resin spherical particles with a diameter 2R0=32R_0=3 μm (Duke Scientific), which provide tangential surface boundary conditions for LC molecules without additional surface treatment. Colloidal dispersions with different number density of colloids were obtained by dispersing particles in a LC host at room temperature either via solvent exchange or mechanical mixing. Prepared colloidal LC dispersions were filled into LC cells while in a LC state after ∼5 min sonication breaking apart pre-existing aggregates. Glass substrates with transparent indium-tin-oxide (ITO) electrodes were used for assembling LC cells. Homeotropic surface boundary conditions at confining glass substrates were set by thin films of spin-coated polyimide SE1211 (Nissan Chemical Industries, Ltd.). Polyimide-coated substrates were slightly rubbed 1-2 times with a velvet cloth applying a weak pressure of ∼380 Pa along a direction er\mathbf{e}_r (Figure 1A) to break the azimuthal degeneracy of the director’s tilt during realignment of homeotropically aligned nematic with negative dielectric anisotropy when a voltage is applied between substrates. Then substrates with rubbed alignment layers were assembled in an antiparallel fashion so that er\mathbf{e}_r on top and bottom substrates are parallel but pointing in opposite directions (Figure 1A). Glass spacers of diameter 5.5 μm dispersed in ultraviolet-curable glue were used to set a cell gap thickness. To minimize spherical aberrations in optical microscopy experiments involving high numerical aperture (NA) immersion oil objectives, one of two substrates was 0.15-0.17 mm thick (SPI Supplies).

Driving voltage, Optical Microscopy and Data Acquisition. A driving voltage was applied to ITO electrodes of a nematic cells. To generate different driving schemes and waveforms of voltage applied to LC, we used an analog function generator GW Instek GFG-8216A or a data acquisition board (NIDAQ-6363, National Instruments) and a homemade MATLAB-based software. They were used to obtain waveforms of low frequency fmf_m voltage with a high carrier frequency fc=1f_c=1-55 kHz. High carrier frequency was used to avoid effects associated with a transport of ions at applied voltage of low frequency. The homemade software allowed tuning various parameters of applied voltage. Generated waveforms were controlled using an oscilloscope Tektronix TDS 2002B.

Experimental observations and data acquisition were performed using optical bright-field and polarizing microscopy imaging modalities of an inverted Olympus IX81 microscope with 20×20\times (NA=0.4\mathrm{NA}=0.4) and oil 100×100\times (NA=1.4\mathrm{NA}=1.4) objectives. Dynamics of LC textures and translational motion of colloidal particles was recorded using a charge-coupled device (CCD) camera (Flea, PointGrey) at a rate of 15 or 30 frames per second and the exact spatial positions of colloidal spheres as a function of time were then determined from captured video using motion tracking plugins of the ImageJ (freeware from NIH) analyzing software.

Numerical Modelling. Nematic director configurations and distortions around spherical particles (Figure 3) were computationally modelled based on Landau-de Gennes free energy minimization using a home-built Matlab program. The total LC bulk free energy density with the LC continuum represented by a tensorial field read [61]:

fbulk=A2QijQij+B3QijQjkQki+C4(QijQij)2+L12(∂Qij∂rk)2+L22∂Qij∂rj∂Qik∂rk+L62Qij∂Qkl∂ri∂Qkl∂rj−12ε0Δε(niEi)2(1)\begin{aligned} f_{\mathrm{bulk}}={}&\frac{A}{2}Q_{ij}Q_{ij}+\frac{B}{3}Q_{ij}Q_{jk}Q_{ki}+\frac{C}{4}\left(Q_{ij}Q_{ij}\right)^2+\frac{L_1}{2}\left(\frac{\partial Q_{ij}}{\partial r_k}\right)^2\\ &+\frac{L_2}{2}\frac{\partial Q_{ij}}{\partial r_j}\frac{\partial Q_{ik}}{\partial r_k}+\frac{L_6}{2}Q_{ij}\frac{\partial Q_{kl}}{\partial r_i}\frac{\partial Q_{kl}}{\partial r_j}-\frac{1}{2}\varepsilon_0\Delta\varepsilon\left(n_iE_i\right)^2 \tag*{(1)} \end{aligned}

with summation of indices implied i,j,k=x,y,zi,j,k=x,y,z. The 3-by-3 tensorial order parameter Q\mathbf{Q} is defined as Q=S2(n⊗n−I)\mathbf{Q}=\frac{S}{2}(\mathbf{n}\otimes\mathbf{n}-\mathbf{I}) by the scalar order parameter SS, LC director n(r)\mathbf{n}(\mathbf{r}), and identity matrix I\mathbf{I} [61]. The Landau-de Gennes coefficients A=−1.72×105A=-1.72\times10^{5} J⋅\cdotm−3^{-3}, B=−12.2×106B=-12.2\times10^{6} J⋅\cdotm−3^{-3}, and C=1.73×106C=1.73\times10^{6} J⋅\cdotm−3^{-3} were adopted [61], and the elastic constants L1=6.31L_1=6.31 pN, L2=10.96L_2=10.96 pN, and L6=0.49L_6=0.49 pN were calculated using reported Frank-Oseen elasticities of ZLI-2806 [62, 63]. Finally, the electric contribution was computed using the dielectric anisotropy Δε=−4.8\Delta\varepsilon=-4.8 of the nematic LC, vacuum permittivity ε0=8.85×10−12\varepsilon_0=8.85\times10^{-12} F⋅\cdotm−1^{-1}, and an electric field E\mathbf{E} assumed to be uniformly vertical across the numerical volume. At the boundary of nematic LC, including particle-LC interfaces and cell substrates, a surface energy density took the form [64]:

fsurf=W0(PikQ~klPlj−32Scos⁡2(φ)Pij)2(2)f_{\mathrm{surf}} = W_0\left(P_{ik}\widetilde{Q}_{kl}P_{lj}-\frac{3}{2}S\cos^2(\varphi)P_{ij}\right)^2 \tag*{(2)}

with P=v⊗v\mathbf{P}=\mathbf{v}\otimes\mathbf{v} the surface projection tensor, v\mathbf{v} the surface normal vector, and Q~=S/2(n⊗n)\widetilde{\mathbf{Q}}=S/2(\mathbf{n}\otimes\mathbf{n}). The surface anchoring coefficients W0=10−5W_0=10^{-5} J m−2^{-2} and 10−310^{-3} J m−2^{-2} for a particle surface were used in calculations with surface anchoring angle φ=90∘\varphi=90^\circ (for spheres with tangential anchoring) and 0∘0^\circ (for substrates with homeotropic anchoring).

For each applied voltage U=∫EzdzU=\int E_z dz, the LC director field n(r)\mathbf{n}(\mathbf{r}) was first computed in a one-dimensional box along the zz-direction with a homeotropic anchoring at top and bottom without a colloidal particle present. The obtained n(z)\mathbf{n}(z) subsequently served as the initial background director profile of the complete simulation in a box sized 6 μ\mum in each dimension and with a spherical particle with diameter D0=3D_0=3 μ\mum located at the center of numerical volume. Periodic boundary conditions were implemented in xx- and yy- directions of the box. The energy-minimizing director field n(r)\mathbf{n}(\mathbf{r}), along with surface-induced distortions (defined as the difference between n(r)\mathbf{n}(\mathbf{r}) and background n(z)\mathbf{n}(z)), were then visualized using Paraview (Figure 3). The calculation of corresponding multipole moments is detailed in Refs. 26 and 64. Here we presented the sum of absolute values ∑m∣qlm∣\sum_m |q_{lm}| for each multipole moment. Corresponding microscopy micrographs were calculated using the extended Jones matrix method.

Author Contributions: I.I.S. designed research and directed the project; B.S. performed experiments; J.-S. Wu performed modelling and calculations; B.S. and I.I.S. analyzed data and wrote the paper.

Acknowledgments

We acknowledge discussions with R. E. Adufu, M. Tasinkevych and T. Lee. I.I.S. acknowledges hospitality of the International Institute for Sustainability with Knotted Chiral Meta Matter (SKCM2^2) at Hiroshima University, where he was partly working on this article. This research was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, under contract DE-SC0019293 with the University of Colorado at Boulder.

Figures

forward and reverse displacements and resulting locomotion. (FF) Dependence of net velocity on fmf_{\mathrm{m}}. A red solid line is a guide to eyes. (GG-II) Plots showing the change of locomotion direction (GG) upon restarting the applied voltage (fm=3.2f_{\mathrm{m}}=3.2 Hz). Dashed lines separate regions with opposite directions of locomotion.

Supporting Information

Movie S1 (separate file). Electric field driven directional motion of two colloidal particles with tangential boundary conditions moving in the same direction in a homeotropic nematic cell at U1=6U_1=6 V and fm=3f_m=3 Hz.

Movie S2 (separate file). Electric field driven directional locomotion of colloidal particles with tangential boundary conditions moving in the opposite directions in a homeotropic nematic cell at U1=6U_1=6 V and fm=3.75f_m=3.75 Hz.

Movie S3 (separate file). Colloidal particle changing the motion direction upon the change of waveforms of an applied voltage at U1=6U_1=6 V and fm=3.2f_m=3.2 Hz.

Movie S4 (separate file). Out-of-equilibrium elastic attractive pair interaction and motion of two colloidal particles under an applied electric field (at U1=6U_1=6 V and fm=3f_m=3 Hz) and elastic repulsive interaction when an electric field is switched off.

Movie S5 (separate file). Out-of-equilibrium elastic attractive interaction and collective motion of multiple colloidal particles under an applied electric field (at U1=6U_1=6 V and fm=2.5f_m=2.5 Hz) and elastic repulsive interaction when an electric field is switched off.

References

  1. [1]T. Vicsek, A. Czirok, E. Ben-Jacob, I. Cohen, O. Shochet. Novel type of phase transition in a system of self-driven particles. Phys. Rev. Lett. 75, 1226-1229 (1995).
  2. [2]T. Vicsek, A. Zafeiris, Collective motion. Phys. Rep. 517, 71-140 (2012).
  3. [3]M. C. Marchetti et al., Hydrodynamics of soft active matter. Rev. Mod. Phys. 85, 1143-1189 (2013).DOI
  4. [4]A. Repula, E. Abraham, V. Cherpak, I. I. Smalyukh, Biotropic liquid crystal phase transformations in cellulose-producing bacterial communities. Proc. Natl. Acad. Sci. U.S.A. 119, e2200930119 (2022).DOI
  5. [5]A. Aubret, S. Ramananarivo, J. Palacci, Eppur si muove, and yet it moves: patchy (phoretic) swimmers. Curr. Opin. Colloid. Interface Sci. 30, 81-89 (2017).DOI
  6. [6]D. K. Sahu, S. Dhara, Electrophoresis of metal-dielectric Janus particles with dipolar director symmetry in nematic liquid crystals. Soft Matter 18, 1819-1824 (2022).DOI
  7. [7]D. K. Sahu, S. Kole, S. Ramaswamy, S. Dhara, Omnidirectional transport and navigation of Janus particles through a nematic liquid crystal film. Phys. Rev. Res. 2, 032009(R) (2020).DOI
  8. [8]M. Driscoll, B. Delmotte, Leveraging collective effects in externally driven colloidal suspensions: experiments and simulations. Curr. Opin. Colloid. Interface Sci. 40, 42-57 (2019).DOI
  9. [9]Devika V. S., D. K. Sahu, R. K. Pujala, S. Dhara, Defect-polymorphism-controlled electrophoretic propulsion of anisometric microparticles in a nematic liquid crystal. Phys. Rev. Appl. 18, 014030 (2022).DOI
  10. [10]A. V. Straube, J. M. Pagès, P. Tierno, J. Ignés-Mullol, F. Sagués, Collective dynamics and conformal ordering in electrophoretically driven nematic colloids. Phys. Rev. Res. 1, 022008(R) (2019).DOI
  11. [11]B. Senyuk, R. A. Adufu, I. I. Smalyukh, Electrically powered locomotion of dual-nature colloid-hedgehog and colloid-umbilic topological and elastic dipoles in liquid crystals. Langmuir 38, 689-697 (2022).DOI
  12. [12]A. Martinez, H. C. Mireles, I. I. Smalyukh, Large-area optoelastic manipulation of colloidal particles in liquid crystals using photoresponsive molecular surface monolayers. Proc. Natl. Acad. Sci. U.S.A. 108, 20891-20896 (2011).DOI
  13. [13]T. Yao et al., Topological defect-propelled swimming of nematic colloids. Sci. Adv. 8, eabn8176 (2022).DOI
  14. [14]I. Dierking, G. Biddulph, K. Matthews, Electromigration of microspheres in nematic liquid crystals. Phys. Rev. E 73, 011702 (2006).pubmed.ncbi.nlm.nih.gov/16486164
  15. [15]C. Liu, T. Xu, L.-P. Xu, X. Zhang, Controllable swarming and assembly of micro/nanomachines. Micromachines 9, 10 (2017).DOI
  16. [16]S. J. Ebbens, J. R. Howse, In pursuit of propulsion at the nanoscale. Soft Matter 6, 726-738 (2010).DOI
  17. [17]M. N. Popescu, W. E. Uspal, Z. Eskandari, M. Tasinkevych, S. Dietrich, Effective squirmer models for self-phoretic chemically active spherical colloids. Eur. Phys. J. E 41, 145 (2018).arxiv.org/abs/1804.02212
  18. [18]B. Guirao, J.-F. Joanny, Spontaneous creation of macroscopic flow and metachronal waves in an array of cilia. Biophys. J. 92, 1900-1917 (2007).
  19. [19]I. I. Smalyukh, O. D. Lavrentovich, A. N. Kuzmin, A. V. Kachynski, P. N. Prasad, Elasticity-mediated self-organization and colloidal interactions of solid spheres with tangential anchoring in a nematic liquid crystal. Phys. Rev. Lett. 95, 157801 (2005).DOI
  20. [20]M. Škarabot et al., Two-dimensional dipolar nematic colloidal crystals. Phys. Rev. E 76, 051406 (2007).pubmed.ncbi.nlm.nih.gov/18233658
  21. [21]B. Senyuk, O. Puls, O. M. Tokvach, S. B. Chernyshuk, I. I. Smalyukh, Hexadecapolar colloids. Nat. Commun. 7, 10659 (2016).DOI
  22. [22]B. Senyuk et al., Transformation between elastic dipoles, quadrupoles, octupoles, and hexadecapoles driven by surfactant self-assembly in nematic emulsion, Sci. Adv. 7, eabg0377 (2021).DOI
  23. [23]H. Stark, Physics of colloidal dispersions in nematic liquid crystals. Phys. Rep. 351, 387-474 (2001).DOI
  24. [24]V. M. Pergamenshchik, V. A. Uzunova, Colloidal nematostatics. Condens. Matter Phys. 13, 33602 (2010).DOI
  25. [25]I. I. Smalyukh, Liquid crystal colloids. Annu. Rev. Condens. Matter Phys. 9, 207-226 (2018).DOI
  26. [26]B. Senyuk, J. Aplinc, M. Ravnik, I. I. Smalyukh, High-order elastic multipoles as colloidal atoms. Nat. Commun. 10, 1825 (2019).
  27. [27]Y. Yuan, Q. Liu, B. Senyuk, I. I. Smalyukh, Elastic colloidal monopoles and reconfigurable self-assembly in liquid crystals. Nature 570, 214-218 (2019).DOI
  28. [28]Y. Yuan, G. N. Abuhaimed, Q. Liu, I. I. Smalyukh, Self-assembled nematic colloidal motors powered by light. Nat. Commun. 9, 5040 (2018).
  29. [29]P. G. de Gennes, J. Prost, The Physics of Liquid Crystals (Clarendon, Oxford, 1995).
  30. [30]P. J. Ackerman, T. Boyle, I. I. Smalyukh, Squirming motion of baby skyrmions in nematic fluids. Nat. Commun. 8, 673 (2017).DOI
  31. [31]C. Long, J. V. Selinger, Coarse-grained theory for motion of solitons and skyrmions in liquid crystals. Soft Matter 17, 10437-10446 (2021).DOI
  32. [32]T. Alvim, M. M. Telo da Gama, M. Tasinkevych, arXiv [Preprint] (2023). Coarse grained model for skyrmion dynamics, https://doi.org/10.48550/arXiv.2304.12884 (accessed 15 May 2023).
  33. [33]H. R. O. Sohn et al., Dynamics of topological solitons, knotted streamlines, and transport of cargo in liquid crystals. Phys. Rev. E 97, 052701 (2018).DOI
  34. [34]H. R. O. Sohn, C. D. Liu, I. I. Smalyukh, Schools of skyrmions with electrically tunable elastic interactions. Nat. Commun. 10, 4744 (2019).DOI
  35. [35]B. Senyuk et al., Magnetically responsive gourd-shaped colloidal particles in cholesteric liquid crystals. Soft Matter 10, 6014-6023 (2014).DOI
  36. [36]T. Kishita et al., Interparticle force in nematic colloids: Comparison between experiment and theory. Phys. Rev. E 84, 021704 (2011).pubmed.ncbi.nlm.nih.gov/21929002
  37. [37]K. Takahashi, M. Ichikawa, Y. Kimura, Force between colloidal particles in a nematic liquid crystal studied by optical tweezers. Phys. Rev. E 77, 020703(R), (2008).pubmed.ncbi.nlm.nih.gov/18351977
  38. [38]S. B. Chernyshuk, B. I. Lev, Theory of elastic interaction of colloidal particles in nematic liquid crystals near one wall and in the nematic cell. Phys. Rev. E 84, 011707 (2011).pubmed.ncbi.nlm.nih.gov/21867196
  39. [39]C. P. Lapointe, T. G. Mason, I. I. Smalyukh, Shape-controlled colloidal interactions in nematic liquid crystals. Science 326, 1083-1086 (2009).DOI
  40. [40]P. Poulin, H. Stark, T. Lubensky, D. Weitz, Novel colloidal interactions in anisotropic fluids. Science 275, 1770-1773 (1997).pubmed.ncbi.nlm.nih.gov/9065396
  41. [41]T. C. Lubensky, D. Pettey, N. Currier, H. Stark, Topological defects and interactions in nematic emulsions. Phys. Rev. E 57, 610-625 (1998).DOI
  42. [42]J. C. Loudet, P. Hanusse, P. Poulin, Stokes drag on a sphere in a nematic liquid crystal. Science 306, 1525 (2004).pubmed.ncbi.nlm.nih.gov/15567855
  43. [43]H. Stark, D. Ventzki, Stokes drag of spherical particles in a nematic environment at low Ericksen numbers. Phys. Rev. E 64, 031711 (2001).pubmed.ncbi.nlm.nih.gov/11580359
  44. [44]H. Stark, D. Ventzki, M. Reichert, Recent developments in the field of colloidal dispersions in nematic liquid crystals: the Stokes drag. J. Phys.: Condens. Matter 15, S191 (2003).DOI
  45. [45]R. L. Stoop, P. Tierno, Clogging and jamming of colloidal monolayers driven across disordered landscapes. Comms. Phys. 1, 68 (2018).DOI
  46. [46]C. Reichhardt, C. J. Olson Reichhardt, Active matter transport and jamming on disordered landscapes. Phys. Rev. E 90, 012701 (2014).DOI
  47. [47]A. Zöttl, H. Stark, Modeling active colloids: from active Brownian particles to hydrodynamic and chemical fields. Annu. Rev. Condens. Matter Phys. 14, 109-127 (2023).
  48. [48]S. Hernández-Navarro, P. Tierno, J. A. Farrera, J. Ignes-Mullol, F. Sagués, Reconfigurable swarms of nematic colloids controlled by photoactivated surface patterns. Angew. Chem. Int. Ed. Engl. 53, 10696-10700 (2014).
  49. [49]H. Zhou, C. C. Mayorga-Martinez, S. Pané, L. Zhang, M. Pumera, Magnetically driven micro and nanorobots. Chem. Rev. 121, 4999-5041 (2021).DOI
  50. [50]H. Zhao, J.-S. B. Tai, J.-S. Wu, I. I. Smalyukh, Liquid crystal defect structures with Möbius strip topology, Nat. Phys. 19, 451-459 (2023).DOI
  51. [51]M. Vilfan et al., Confinement effect on interparticle potential in nematic colloids. Phys. Rev. Lett. 101, 237801 (2008).pubmed.ncbi.nlm.nih.gov/19113594
  52. [52]B. Senyuk, D. Glugla, I. I. Smalyukh, Rotational and translational diffusion of anisotropic gold nanoparticles in liquid crystals controlled by varying surface anchoring. Phys. Rev. E 88, 062507 (2013).pubmed.ncbi.nlm.nih.gov/24483468
  53. [54]B. I. Lev, A. G. Zagorodny, Collective diffusion of colloidal particles in a liquid crystal. Ukr. J. Phys. 64, 48-55 (2019).
  54. [55]A. J. C. Ladd, H. Gang, J. X. Zhu, D. A. Weitz, Time-dependent collective diffusion of colloidal particles. Phys. Rev. Lett. 74, 318 (1995).pubmed.ncbi.nlm.nih.gov/10058358
  55. [56]G. P. Sinha, B. Wen, C. Rosenblatt, Large, continuously controllable nematic pretilt from vertical orientation. Appl. Phys. Lett. 79, 2543 (2001).DOI
  56. [57]B. L. Van Horn, H. H. Winter, Analysis of the conoscopic measurement for uniaxial liquid-crystal tilt angles. Appl. Opt. 40, 2089-2094 (2001).pubmed.ncbi.nlm.nih.gov/18357214
  57. [58]R. W. Ruhwandl, E. M. Terentjev, Long-range forces and aggregation of colloid particles in a nematic liquid crystal. Phys. Rev. E 55, 2958 (1997).DOI
  58. [59]H. R. O. Sohn, I. I. Smalyukh, Electrically powered motions of toron crystallites in chiral liquid crystals. Proc. Natl. Acad. Sci. U.S.A. 117, 6437-6445 (2020).DOI
  59. [60]C. P. Lapointe, S. Hopkins, T. G. Mason, I. I. Smalyukh, Electrically driven multiaxis rotational dynamics of colloidal platelets in nematic liquid crystals. Phys. Rev. Lett. 105, 178301 (2010).pubmed.ncbi.nlm.nih.gov/21231084
  60. [61]M. Ravnik, S. Žumer, Landau–de Gennes modelling of nematic liquid crystal colloids. Liq. Cryst. 36, 1201-1214 (2009).DOI
  61. [62]H. Mori, E. C. Gartland Jr, J. R. Kelly, P. J. Bos, Multidimensional director modeling using the Q tensor representation in a liquid crystal cell and its application to the π cell with patterned electrodes. Jpn. J. Appl. Phys. 38,135 (1999).
  62. [63]P. J. Ackerman, I. I. Smalyukh, Diversity of knot solitons in liquid crystals manifested by linking of preimages in torons and hopfions. Phys. Rev. X 7, 011006 (2017).
  63. [64]Y. Zhou, B. Senyuk, R. Zhang, I. I. Smalyukh, J. J. de Pablo, Degenerate conic anchoring and colloidal elastic dipole-hexadecapole transformations. Nat. Commun. 10, 1000 (2019).DOI

Paper details

vlnc:W_v6gqvmrg
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents