WorksMathematics
A centroaffine perspective on improved Brascamp–Lieb and dimensional Brunn–Minkowski inequalities
Abstract
We study dimensional concavity properties of even log-concave measures within the framework of weighted centroaffine differential geometry. We express the relevant local concavity inequalities in terms of a weighted Hilbert–Brunn–Minkowski operator and establish an anisotropic Poincaré inequality for odd functions and a strengthened Brascamp–Lieb inequality for even functions. As applications, we obtain quantitative dimensional concavity estimates for a class of geometric measures and measures with pinched Hessian, extending results of Cordero-Erausquin and Rotem for rotationally invariant measures and Eskenazis and Moschidis for the Gaussian measure.
Introduction
The classical Brunn–Minkowski inequality asserts that, for any two convex bodies , namely compact convex sets with nonempty interior, and every ,
Here, denotes the Lebesgue measure. Moreover, we denote by the family of convex bodies in . Considerable attention has been devoted to extending and strengthening (1), particularly under symmetry assumptions. One direction consists of replacing Minkowski addition by the -addition of convex bodies. Of particular interest is the range , where the -Brunn–Minkowski conjectures assert that
for all origin-symmetric and every . We defer the precise definition of -addition to Section 2 and note that, in the chosen range , (2) strengthens (1). The limiting case is the celebrated log-Brunn–Minkowski conjecture of Böröczky, Lutwak, Yang and Zhang [3], which asserts that
An approach to these questions is provided by the spectral properties of the Hilbert–Brunn–Minkowski operator, which we briefly describe. Let denote the class of origin-symmetric
MSC 2020 Classification: 52A40, 26D10, 53A15, 60E15. convex bodies with boundary and strictly positive principal curvatures. For , let be its support function and define the tensor
on the tangent bundle of . Here, denotes the spherical gradient. With the normalization used here, the Hilbert–Brunn–Minkowski operator acts on by
where the standard covariant derivative on is considered and repeated indices are summed. Kolesnikov and E. Milman [23, 26] related local -Brunn–Minkowski inequalities to lower bounds on the first nonzero even eigenvalue of . In particular, they established the local inequalities for every smooth origin-symmetric convex body in a dimension-dependent range of parameters sufficiently close to 1. E. Milman [26] subsequently identified with the Laplace–Beltrami operator on the boundary of (which we denote by ), associated with a suitable Riemannian metric and a connection distinct from the Levi-Civita connection of that metric. Doing so, the treatment in [26] placed the problem in the context of so-called centroaffine differential geometry and led to results under curvature pinching conditions. The relation between this geometry and the Hessian metric of the Minkowski functional was further developed by Ivaki and E. Milman [18]. Similar results under pinching were later obtained in connection to improved Brascamp–Lieb inequalities by Kolesnikov, Livshyts and Rotem [19].
Another direction concerns replacing the Lebesgue measure by more general measures. For a measure with density , where is convex, the Prékopa–Leindler inequality asserts that
for all convex bodies , and every . Equivalently (compare the work of Borell [2]), a Borel measure satisfying (4) is said to be log-concave. For the Lebesgue measure, it is immediate via homogeneity that this multiplicative adimensional inequality is equivalent to (1). The same procedure evidently breaks for general log-concave measures. Improving the concavity of log-concave measures is a research topic that has produced a significant amount of work in the study of log-concave measures, the main example being the dimensional Brunn–Minkowski conjecture: It postulates that the volume in (1) can be replaced with an arbitrary even log-concave measure when the convex sets are assumed to be origin symmetric. As a natural question, the weighted and extensions meet in the study of inequalities of the form
for origin-symmetric , and even log-concave measures , with interpreted in the limiting sense. The choice gives the dimensional Brunn–Minkowski conjecture, while gives the weighted log-Brunn–Minkowski conjecture. These inequalities were studied within a common -concavity framework by Hosle, Kolesnikov and Livshyts [16].
For the choice of as the Gaussian measure and , Gardner and Zvavitch [14] originally proposed the dimensional inequality (5) under the weaker assumption that the convex bodies contain the origin. Nayar and Tkocz [28] disproved this formulation, leaving the origin-symmetric case as the principal question. The corresponding dimensional problem for general even log-concave measures was investigated by Colesanti, Livshyts and Marsiglietti [6], who established local results near the Euclidean ball for rotationally invariant log-concave measures.
We briefly comment on the usual approach for this weighted setting, using a Bochner formula due to Kolesnikov and E. Milman [21, 22] and Kolesnikov and Livshyts [20], for these concavity inequalities it is sufficient to establish coercivity estimates for quantities of the form
for every origin symmetric convex set and even function . Using this approach, Eskenazis and Moschidis [12] subsequently proved the Gaussian inequality with the conjectured exponent for all origin-symmetric convex bodies. Further extensions have since been obtained. Han and Zhu [15] replaced origin symmetry by the assumption that the Gaussian measures conditioned on the two convex sets have the same barycenter, and obtained an inequality with explicit barycenter terms in the general case. Recently Milman, Nakamura and Tsuji [27] established a heterovariant Gaussian Brunn–Minkowski inequality, involving Gaussian measures with different covariance matrices subject to a matrix compatibility condition. Their result contains the dimensional Gaussian inequality and connects it with strengthened Gaussian dilation inequalities, which relates to the (B) conjecture, which we now state. The Gaussian statement was proposed by Banaszczyk and popularized by Latała [24]; its extension to even log-concave measures asks whether, for every origin-symmetric convex body , the function
is log-concave on . Cordero-Erausquin, Fradelizi and Maurey [8] proved the Gaussian case. We also remark that the (B) property holds for a certain class of Gaussian mixtures [13]. Saroglou [30] showed that the log-Brunn–Minkowski conjecture for the Lebesgue measure implies its weighted version for even log-concave measures and, consequently, the (B) conjecture. Cordero-Erausquin and Rotem [10] established both the (B) property and the dimensional Brunn–Minkowski inequality for rotationally invariant log-concave measures, as well as for a broader class of measures with radial densities.
The general scheme is to prove an improved Poincaré inequality for odd functions, then apply this estimate to the coordinate functions of a gradient of an even function and conclude some coercivity estimate. In the general case that the measure is assumed to be merely log-concave this was combined with delicate gradient estimates to produce a weaker form of (5), in an approach put forth by Livshyts [25] and extended by Eskenazis, Giannopoulos and Tziotziou [11] and Yang [32].
Main results. The purpose of this work is to connect the spectral and centroaffine approach to the log-Brunn–Minkowski problem with the functional inequalities developed for dimensional concavity and the (B) conjecture. A similar path has been recently explored also by Hu and Ivaki [17].
We first express the weighted local concavity inequalities in terms of a spectral minimization problem for an appropriate operator defined on the boundary of convex sets. More precisely, given and a log-concave measure with density of class , we define the weighted Hilbert–Brunn–Minkowski operator as
Here, denotes the weighted centroaffine Laplace–Beltrami operator, which will be defined properly in § 2. Moreover, denotes the standard Euclidean scalar product in . We use the same notation for its restriction to embedded submanifolds of . The weighted cone-volume measure on with respect to is defined as the measure on with density
We note that pushing (6) on the sphere through the Gauss map in the unweighted setting yields precisely the usual Hilbert–Brunn–Minkowski operator (3).
With these definitions at hand, the relevant functional for us is the following:
We remark that whenever and is strictly convex and even, the denominator is never zero unless . Our first result records the common spectral formulation of the preceding concavity properties.
Theorem 1.1. Let be an even log-concave measure on with density , where is strictly convex. Then the following characterizations hold:
For , inequality (5) holds for all origin-symmetric convex bodies and every if and only if
for every . The case is understood in the limiting sense.
The measure satisfies the (B) inequality for all origin-symmetric convex bodies if and only if
for every .
We note that in the case of the Lebesgue measure, the weighted cone-volume measure reduces to the usual normalized cone-volume measure and (7) reduces to the first even eigenvalue of the Hilbert–Brunn–Minkowski operator.
Fix now a smooth origin-symmetric convex body , and set
where denotes its Minkowski functional. Following the ideas of [10], we were able to extend their central Poincaré inequality for odd functions to the anisotropic setting. Let us remark that, during the preparation of this work, a preprint by Cordero-Erausquin, Livshyts and Rotem [9] appeared where the following result was obtained independently. The proof strategy is the same up to minor differences, one of them being that we use a weighted centroaffine formalism. This shall be of no surprise, as the blueprint is the one laid down in the substantial work by Cordero-Erausquin and Rotem [10]. Nonetheless, in this manuscript we manage to further leverage the ideas from [10] combining them with the approach of [12]. In particular, we obtain the conclusions expected in [9 p. 9] as a consequence of the following result. We present these implications in the remainder of this manuscript.
Theorem 1.2. Let be a smooth origin-symmetric convex body with strictly positive principal curvatures, let be increasing, and let be even and convex. Consider the finite measure
Then, for every odd for which the integrals are finite,
To pass from the above to an improved Brascamp–Lieb inequality for even functions, we impose the pinching condition
and write . Adapting the approach from [10], we obtain the following consequence of Theorem 1.2.
Theorem 1.3. Let be a smooth origin-symmetric convex body with strictly positive principal curvatures satisfying (8), and let be increasing and satisfy
Let be even and convex, and suppose that
is a probability measure. Then, for every even ,
When the matrix is singular, the inverse quadratic form is understood as the associated dual quadratic form.
Here . When is the Euclidean unit ball, is just the identity matrix and one can take , recovering the corresponding inequalities of Cordero-Erausquin and Rotem [10].
Using the method and the above inequalities we can conclude a dimensional Brunn–Minkowski inequality for this class of measures.
Theorem 1.4. Let be a smooth origin-symmetric convex body with strictly positive principal curvatures, and suppose that satisfies (8). Let , and let be increasing and satisfy (9). Suppose that
defines a finite measure. Then, for every pair of origin-symmetric convex bodies and every ,
We point out that inequality (10) constitutes a quantitative version of the result of [10], since the parameter in the pinching above quantifies how far the set is from a ball, in centroaffine terms. We remark that some of the measures above need not necessarily be log-concave. Finally, we show that a similar argument, independent of the centroaffine machinery we develop, works for general measures with a suitable pinching on the potential, leading to the following result.
Theorem 1.5. Let be even and convex, and suppose that
for some . Set and let . Then, for every pair of origin-symmetric convex bodies and every ,
Theorem 1.5 can be understood as an extension of the result of Eskenazis and Moschidis [12], since for the Gaussian . In particular, notice that Theorem 1.5 improves the previous dimensional inequalities from [20] and [1] under pinching conditions.
Structure of the manuscript. The paper is organized as follows. Section 2 collects the geometric notation and the properties of the weighted centroaffine Laplacian. Section 3 develops the weighted Hilbert–Brunn–Minkowski framework and discusses its relation to local concavity inequalities and spectral comparison questions. Section 4 establishes the anisotropic Poincaré and strengthened Brascamp–Lieb inequalities. Section 5 derives the dimensional concavity estimates for measures associated with a Minkowski functional and for general pinched potentials.
Further context for the results. As previously mentioned in this introduction, both the dimensional Brunn–Minkowski conjecture and the (B) conjecture are implied by the logarithmic Brunn–Minkowski conjecture. An AI-generated solution to this major problem was released by OpenAI at the beginning of October 2026. The elaboration of this manuscript and its content dates back to prior to the aforementioned release, and our proofs follow the path laid out by the various works mentioned in the introduction. We believe our results to be of independent interest for a deeper understanding of the aforementioned conjectures. Moreover, several of our statements involve measures beyond log-concave ones and, therefore, are not implied by the logarithmic Brunn–Minkowski conjecture.
Preliminaries
Throughout this work, let be a compact convex set whose boundary is a manifold with bounded and strictly positive principal curvatures. We call a set of this type a smooth convex body and assume that the origin lies in its interior. We denote by the corresponding Gauss map and by its second fundamental form. Identifying the latter with the associated shape operator, we have . We refer to [31 Section 2.5] for further details on the differential geometry of smooth convex bodies.
Let , , denote the support function of , and write , so that is defined on . Following [23, 26], we equip with the centroaffine metric
For computational purposes, we work directly on . The corresponding spherical formulation is obtained through the Gauss map; see also [18, 17]. For convex bodies containing the origin in their interiors, and , we define their -sum by
This is the Wulff shape associated with the function , which need not itself be a support function. The limiting case is defined by replacing this function with , while recovers the usual Minkowski combination .
Let be convex, and let be the log-concave measure defined by
With a slight abuse of notation, we also use to denote the surface measure on . We define the -cone-volume measure of by
For the Lebesgue measure, this agrees with the normalized cone-volume measure. In general, however, need not be a probability measure, a distinction that will be relevant in what follows.
Building on [23, 26, 18], we define, for ,
When , this reduces to the Hilbert–Brunn–Minkowski operator with the normalization of [26]. Equivalently, is the weighted Laplace–Beltrami operator associated with . Indeed, the corresponding metric gradient is
and integration by parts gives, for every ,
On the weighted Hilbert operator
In this section, we define the weighted analogue of the Hilbert operator, following [23], and study its connection to local formulations of global concavity inequalities and their spectral counterparts. Our starting point is the -concavity inequality
where , are origin-symmetric convex bodies, and is an even log-concave probability measure on with density
for an even, convex, lower semicontinuous function . The case is understood in the logarithmic sense. For the differential and spectral statements below, we additionally assume that is finite and belongs to .
As established in [16 Lemma 2.1], the validity of (12) for all origin-symmetric convex bodies implies the following infinitesimal inequality: for every origin-symmetric and every even ,
where . As in the preliminaries, on denotes .
The converse implication is more delicate. In the unweighted setting, local-to-global arguments were developed using strongly isomorphic polytopes in [29] and a PDE approach in [4]. In the weighted setting, [16 Theorem 3.1] shows that, for , the validity of (13) for all such and implies (12) for all origin-symmetric convex bodies. For , this is [20 Lemma 3.1].
We begin with the observation that the local inequality takes a particularly convenient form when expressed in terms of the Riemannian structure discussed above. The following algebraic reformulation does not require symmetry.
Proposition 3.1. Let contain the origin in its interior. For a given , set . Then (13), evaluated at , can be further rewritten as
Equivalently,
where, here and below with a slight abuse of notation,
Proof. First, consider the substitution . Observe that, by the divergence theorem,
Now, by direct computations,
and
Recalling that
and
we see that the generalized mean curvature cancels and we are left with precisely with (14).
The log-concavity of corresponds to and , with the latter understood in the limiting sense. Since log-concavity holds without symmetry assumptions, this gives the following reformulation of the boundary Poincaré inequalities of Colesanti [5] and Kolesnikov–Milman [21, 22]. An equivalent result was independently obtained in [9 Lemma 8.2].
Theorem 3.2. Let be a log-concave measure on with density , where is convex. Then, for every containing the origin in its interior and every ,
Proof. It is immediate in virtue of Proposition 3.1 with and , together with (11).
The preceding formulations admit a natural spectral interpretation. We now return to even measures and origin-symmetric bodies and introduce the corresponding operator.
Definition 3.3 (Weighted Hilbert operator). Let be an even log-concave measure on with density , where , and let be origin-symmetric. We define the weighted Hilbert–Brunn–Minkowski operator associated with and by
Notice that an integration by parts gives
Therefore, is self-adjoint in the Sobolev space . In particular, it is reasonable to introduce the following spectral quantity:
Here denotes the even functions on . Unlike in the unweighted setting [22, 26], constants do not, in general, belong to the kernel of . Consequently, one cannot impose a zero mean constraint in this variational problem. Furthermore, notice that the divergence theorem gives
where the last inequality follows from the convexity and evenness of . In the case that is strictly convex the above inequality is strict. Indeed, since if we would have
But then strict convexity would imply that , which is a contradiction. Writing , the Cauchy–Schwarz inequality yields
Thus,
Thus for strictly convex , for every nonzero continuous .
Finally, when one discusses concavity principles for log-concave measures it is enough to assume that the function is strictly convex, via a usual approximation argument, so we focus our attention to this case in order to avoid ambiguity.
With these preliminaries in place, we use the above operator to set a spectral framework for studying dimensional concavity properties of even log-concave measures, as illustrated by the following characterization, which is Theorem 1.1 in the introduction.
Theorem 3.4. Let be an even log-concave measure on with density , where . For , the inequality
holds for all origin-symmetric convex bodies and every if and only if
for every origin-symmetric . The case is understood in the limiting sense as
Furthermore given an origin-symmetric convex set , we have that
is concave at , if and only if
In particular the property holds for the measure if and only if , for every origin symmetric convex set .
Proof. For the first part, setting in Proposition 3.1, the local inequality becomes
For functions with , this is exactly the bound on the Rayleigh quotient, which is the case for strictly convex potentials . For , the equivalence with the global inequality follows from Lemma 3.1 in [16]. For , one can refer to [20].
For the second part, fixing a convex set , consider the functional
It is well known, see e.g. [7, 10], that
and
Thus the inequality , is equivalent to
On the other hand, can be expanded as
For the term on the left hand side, an integration by parts yields
For the right hand side of (17), we need only employ the following direct application of the divergence theorem
which yields that the right hand side of (17) is equal to
Putting everything together, cancels out and we are left precisely with (16), concluding the proof.
Anisotropic Poincaré and strong Brascamp–Lieb inequalities for gauge-symmetric measures
We start with a simple lemma to split the Hessian of inverse quadratic gauge potentials into radial and tangential components, with respect to the anisotropic Riemannian metric introduced in [18]. We remark that a proof can be given via a usage of Lemma 2.2 therein. See, for example, [9 Lemma 8.1]. We propose an independent proof.
Lemma 4.1. For smooth convex body, consider the function . For every and , we have
Proof. We first observe that, by Fenchel–Legendre duality,
for every . The equality above can be found, for example, in [31 (1.49), Section 1.7]. Then, direct computations show
If we now choose , by the properties of gauge functions . Denoting by , , the orthogonal projection along , it is well-known that (compare, e.g., [31 Lemma 2.5.1])
where now we consider these objects as bilinear forms on . In particular,
As is 1-homogeneous and is 0-homogeneous, we infer
and the proof is concluded by direct computations, recalling that, for every ,
Finally, let us recall the following 1-dimensional Poincaré inequality, which is [10 Lemma 8].
Lemma 4.2. Consider , and such that . Then, for every
With these results at hand, we can now prove the main result of this section, which can be understood as the anisotropic analogue of [10 Theorem 4]. An equivalent formulation was recently proved in [9 Theorem 1.8].
Theorem 4.3. Consider an increasing function and an even and smooth convex body. Let be convex, then denoting by the measure on satisfying , for every odd function we have
where .
Proof. We start by observing that, using polar coordinates, we can rewrite the left-hand side of (18) as
By Lemma 4.2 with the choice , we infer
Next, observe that, by (15), since is odd and the measure as well as is symmetric, we have that
If now we invert the order of integration in (20) and apply the inequality (21), we deduce
Finally, by Lemma 4.1 we have
and the proof is concluded by integrating in polar coordinates. ∊pp
Remark 4.4. The above inequality is sharp whenever and , with fixed. We remark also that the above inequality is a Poincaré inequality on the Hessian weighted manifold
for odd functions. In the case that the underlying set is a ball, we have that is the identity and thus the above inequality reduces to a Poincaré inequality in the usual Euclidean space, which is the result of Cordero-Erausquin and Rotem [10].
The usage of the centroaffine metric (or the ambient anisotropic one) albeit convenient for the computations and the proof of the inequality still does not agree fully with the geometry of . This problem is remedied in the works of Milman and Ivaki–Milman [26, 18], through a pinching condition on the set . Following this idea we establish an improved Brascamp–Lieb inequality. The proof is an adaptation of [10 Theorem 3].
Theorem 4.5. Consider an increasing function and a probability measure on satisfying , where is convex and even and is an origin-symmetric smooth convex body. Suppose, additionally, that
for every some , and that satisfies
where .
Then, writing , for every even function we have the inequality
Proof. The arguments mimic those in [10] which, in turn, builds upon [8]. We streamline the presentation for the convenience of the reader.
Let us begin by showing that (22) implies that
the matrix is positive semidefinite.
Indeed, by direct computations, for every and writing , we have the identity
The coefficient of the first matrix is non-negative thanks to (22) while, for the second one, this follows from the monotonicity of and, thus, is positive semidefinite. This is enough to follow through with the computations in the rest of the proof, as explained in [10 Remark 9]. We may (and do) assume that is in addition centered, i.e. subtracting a constant if that is not the case. With these preliminary remarks in place notice that (23) is equivalent to
Denoting by the standard Laplace–Beltrami operator on with respect to , is dense in the subspace of orthogonal to constant functions. See [8 Lemma 3] for a proof. In particular, we can approximate with these function and, therefore, (24) would follow if we are able to show that
We now estimate the first integral in (25). We have by integration by parts. The Cauchy–Schwarz inequality for positive quadratic forms implies that
we obtain the bound
Concerning the remainder, integration by parts gives
where denotes the Hilbert–Schmidt norm of a matrix. Then, (26) and (27) in combination with the fact that is positive definite, give
Therefore to conclude the proof, it suffices to show that
which is indeed true, as
where denotes the -th derivative of and, in the second step, we have used Theorem 4.3. □
We also have the following variant of the above inequality that can be deduced by a direct modification of the final step in the proof above (28), when the function is assumed to be in addition convex.
Theorem 4.6. Consider an increasing and convex function and a probability measure on satisfying , where is convex and even and is an origin-symmetric smooth convex body and set . Assuming that
then for every even function ,
Remark 4.7. Whenever is a smooth convex body that is origin symmetric, with strictly positive principal curvatures we may always find numbers such that the above pinching or one sided control is satisfied.
Improved dimensional concavity for gauge-symmetric and pinched measures
The first aim of this section is to prove a dimensional Brunn–Minkowski inequality for the following type of measures. We consider , where is chosen as in Theorem 4.5, and the corresponding measure such that . Again with the notation , by homogeneity we have and the Laplace–Beltrami operator of can be written as
Consider now the measure in Theorem 4.5 and define, for , the bilinear form
Observe that, by Theorem 4.3, is positive semidefinite on the subspace of even functions. The operators and are connected by the relation
which is instrumental in the proof of the following result.
Theorem 5.1. Consider an origin-symmetric and smooth convex body such that the corresponding quadratic potential satisfies
for some . Consider, moreover, an increasing function satisfying (22), and write . Then, for every convex function such that the measure with density is a probability measure we have
for every even .
Proof. Fix even. We start by observing that, by the pinching condition (30),
where the last step follows from (22) as in Theorem 4.5.
Next, we note that, by the bilinearity of and (29), the function , , satisfies
Then, the assumed estimate implies
for every . Optimizing in yields
where the last line follows since is positive semidefinite for the functions at hand. The proof of (31) is concluded comparing this last estimate with (32).
To show that a dimensional Brunn–Minkowski inequality holds for the measure with concavity , we invoke the following result by Kolesnikov and Livshyts, which is part of [20 Lemma 2.3].
Theorem 5.2. Let be an even measure with density such that , suppose that for every origin symmetric convex body and every with on we have that
Then,
for all origin-symmetric convex bodies .
With Theorem 5.2 at hand, the inequality
for all origin-symmetric convex bodies follows by (31) and standard approximation arguments, providing a proof of Theorem 1.4.
We finish this section by exporting the perturbative argument in the proof of Theorem 5.1 to more general pinched log-concave measures. Its proof is completely independent from most of the machinery developed above, but it came as a natural consequence of the procedures in the previous sections. The result improves the dependence on the pinching as established in [20] and [1].
Theorem 5.3. Consider an even and convex function such that
for some , and write . Denoting by the log-concave measure with density we have, for every ,
for every origin-symmetric convex bodies .
Proof. In order to prove (34), the strategy is again to prove that condition (33) holds for every origin-symmetric and smooth convex body and apply the conclusion of Theorem 5.2. The statement follows then by density.
Fix a smooth and origin symmetric convex body . Similarly as we did with at the beginning of this section, for we define the bilinear form
Observe that is positive definite on odd functions by the Brascamp–Lieb variance inequality. For fixed, consider the linear perturbation , . Then,
and, since , we infer
for every . Optimizing in ,
Finally, using and (35), we estimate
concluding the proof.
AI use disclosure. The authors used AI to streamline the organization of the paper and, in part, to improve the presentation. All the mathematical statements and proofs have been obtained and checked solely by the authors, without the aid of LLMs.
Acknowledgments. The first-named author was supported by the Austrian Science Fund (FWF): 10.55776/P36344N. The second-named author gratefully acknowledges the support of the Basic Research Program of HSE University. The third-named author was supported, in part, by the Austrian Science Fund (FWF): 10.55776/PAT3787224. The authors extend their gratitude to the Erdős Center in Budapest, to its director, Károly Böröczky, and to the administrative staff for hosting and supporting the “Focused Workshop on the log-Brunn-Minkowski conjecture: State of the art and ramifications”, during which the authors started the collaboration leading to this manuscript.
Sotiris Armeniakos
Institut für Stochastik und Wirtschaftsmathematik, TU Wien
e-mail: [email protected]
Alexander Kolesnikov
HSE University, Russian Federation
e-mail: [email protected]
Jacopo Ulivelli
Institut für Diskrete Mathematik und Geometrie, TU Wien
e-mail: [email protected]
References
- [1]S. Armeniakos and J. Ulivelli, A new infinitesimal form of the Prékopa–Leindler inequality with multiplicative structure and applications, arXiv:2602.10812, (2026).arxiv.org/abs/2602.10812
- [2]C. Borell, Convex set functions in d-space, Period. Math. Hungar., 6 (1975), pp. 111–136.
- [3]K. Böröczky, E. Lutwak, D. Yang, and G. Zhang, The logarithmic Minkowski problem, Journal of the American Mathematical Society, 26 (2013), pp. 831–852.DOI
- [4]S. Chen, Y. Huang, Q.-R. Li, and J. Liu, The L_p-Brunn-Minkowski inequality for p < 1, Adv. Math., 368 (2020), pp. 107166, 21.
- [5]A. Colesanti, From the Brunn–Minkowski inequality to a class of Poincaré-type inequalities, Commun. Contemp. Math., 10 (2008), pp. 765–772.DOI
- [6]A. Colesanti, G. V. Livshyts, and A. Marsiglietti, On the stability of Brunn-Minkowski type inequalities, J. Funct. Anal., 273 (2017), pp. 1120–1139.arxiv.org/abs/1606.06586
- [7]D. Cordero-Erausquin and A. Eskenazis, Concavity principles for weighted marginals, arXiv:2506.16941, (2025).
- [8]D. Cordero-Erausquin, M. Fradelizi, and B. Maurey, The (B) conjecture for the Gaussian measure of dilates of symmetric convex sets and related problems, J. Funct. Anal., 214 (2004), pp. 410–427.
- [9]D. Cordero-Erausquin, G. V. Livshyts, and L. Rotem, Remarks on the Brascamp–Lieb inequality, arXiv:2610.34289, (2026).
- [10]D. Cordero-Erausquin and L. Rotem, Improved log-concavity for rotationally invariant measures of symmetric convex sets, Ann. Probab., 51 (2023), pp. 987–1003.
- [11]A. Eskenazis, A. Giannopoulos, and N. Tziotziou, Functional perimeter and the dimensional Brunn–Minkowski inequality for log-concave measures, arXiv:2605.02747, (2026).arxiv.org/abs/2605.02747
- [12]A. Eskenazis and G. Moschidis, The dimensional Brunn-Minkowski inequality in Gauss space, J. Funct. Anal., 280 (2021), pp. Paper No. 108914, 19.arxiv.org/abs/2004.07146
- [13]A. Eskenazis, P. Nayar, and T. Tkocz, Gaussian mixtures: entropy and geometric inequalities, Ann. Probab., 46 (2018), pp. 2908–2945.DOI
- [14]R. Gardner and A. Zvavitch, Gaussian Brunn–Minkowski inequalities, Trans. Amer. Math. Soc., 362 (2010), pp. 5333–5353.DOI
- [15]B.-X. Han and Z.-N. Zhu, Sharp Poincaré Interpolation Along Wasserstein Geodesics, arXiv:2607.10769, (2026).arxiv.org/abs/2607.10769
- [16]J. Hosle, A. V. Kolesnikov, and G. V. Livshyts, On the L_p-Brunn-Minkowski and dimensional Brunn–Minkowski conjectures for log-concave measures, The Journal of Geometric Analysis, 31 (2021), pp. 5799–5836.arxiv.org/abs/2003.05282
- [17]Y. Hu and M. N. Ivaki, Weighted centro-affine Poincaré inequalities, arXiv:2606.04774, (2026).
- [18]M. N. Ivaki and E. Milman, Lᵖ-Minkowski problem under curvature pinching, Int. Math. Res. Not. IMRN, (2024), pp. 8638–8652.
- [19]A. V. Kolesnikov, G. Livshyts, and L. Rotem, On p-Brunn-Minkowski and Brascamp-Lieb inequalities, arXiv:2507.12099, (2026).arxiv.org/abs/2507.12099
- [20]A. V. Kolesnikov and G. V. Livshyts, On the Gardner-Zyavitch conjecture: symmetry in inequalities of Brunn-Minkowski type, Adv. Math., 384 (2021), pp. Paper No. 107689, 23.arxiv.org/abs/1807.06952
- [21]A. V. Kolesnikov and E. Milman, Brascamp-Lieb-type inequalities on weighted Riemannian manifolds with boundary, J. Geom. Anal., 27 (2017), pp. 1680–1702.arxiv.org/abs/1310.2526
- [22]———, Poincaré and Brunn–Minkowski inequalities on the boundary of weighted Riemannian manifolds, Amer. J. Math., 140 (2018), pp. 1147–1185.arxiv.org/abs/1711.08825
- [23]———, Local Lᵖ-Brunn-Minkowski inequalities for p < 1, Mem. Amer. Math. Soc., 277 (2022), pp. v+78.
- [24]R. Latała, On some inequalities for Gaussian measures, in Proceedings of the International Congress of Mathematicians, vol. II, Beijing, 2002, Higher Education Press, pp. 813–822.DOI
- [25]G. V. Livshyts, A universal bound in the dimensional Brunn–Minkowski inequality for log-concave measures, Trans. Amer. Math. Soc., 376 (2023), pp. 6663–6680.arxiv.org/abs/2107.00095
- [26]E. Milman, Centro-affine differential geometry and the log-Minkowski problem, J. Eur. Math. Soc. (JEMS), 27 (2025), pp. 709–772.
- [27]E. Milman, S. Nakamura, and H. Tsuji, Gaussian inequalities with different covariance matrices- the Heterovariant Gaussian Brunn-Minkowski inequality, arXiv:2610.13596, (2026).arxiv.org/abs/2610.13596
- [28]P. Nayar and T. Tkocz, A note on a Brunn–Minkowski inequality for the Gaussian measure, Proceedings of the American Mathematical Society, (2013), pp. 4027–4030.arxiv.org/abs/1202.0046
- [29]E. Putterman, Equivalence of the local and global versions of the Lᵖ-Brunn-Minkowski inequality, J. Funct. Anal., 280 (2021), pp. Paper No. 108956, 20.
- [30]C. Saroglou, More on logarithmic sums of convex bodies, Mathematika, 62 (2016), pp. 818–841.
- [31]R. Schneider, Convex bodies: the Brunn-Minkowski theory, vol. 151 of Encyclopedia of Mathematics and its Applications, Cambridge University Press, Cambridge, expanded ed., 2014.
- [32]K.-W. Yang, A uniform bound in the dimensional Brunn–Minkowski inequality for even log-concave measures, arXiv:2607.10104, (2026).arxiv.org/abs/2607.10104