betaFeedback

WorksPhysics and Astronomy

Inverse Problem Approach for Non-Perturbative QCD: Applications

Abstract

In arXiv:2211.13753 we proposed a novel theoretical approach for non-perturbative QCD, named the inverse problem approach. It extracts non-perturbative quantities by solving a dispersion integral equation as an inverse problem, using perturbative QCD and operator product expansion as inputs. In this work, we apply this approach to the pion and a1(1260)a_1(1260) decay constants, as well as the continuum spectral function. The extracted fπ=130.8±8.1f_π= 130.8 \pm 8.1 MeV agrees with the experimental value, and the reconstructed spectral function reproduces the ALEPH ττ-decay data from threshold up to s≃3s \simeq 3 GeV2^2. The advantages of this approach are as follows: (i) the whole non-perturbative range is solved simultaneously, yielding the ground state, excited states, and the continuum spectrum within a single framework; (ii) it is based on rigorous mathematics, with not only statistical but also systematic uncertainties well controlled and quantifiable; (iii) the regularized solutions exhibit convergence, allowing the precision to be systematically improved with better inputs; (iv) quark-hadron duality emerges naturally at high energy scales, avoiding the low-energy duality assumption and the Borel transformation, and eliminating their associated uncertainties. Finally, the successful physical application of the inverse problem approach demonstrates its broad applicability to non-perturbative quantities.

Introduction

How to calculate non-perturbative QCD quantities is a long-standing problem in particle physics and nuclear physics. In Ref. [1], we constructed a novel and complete theoretical framework for such calculations, named the inverse problem approach. The idea was first proposed in Ref. [2] to study D0−Dˉ0D^{0}-\bar{D}^{0} mixing. It determines the non-perturbative quantities in the dispersion integral equation as an inverse problem, using perturbative calculations as inputs. However, its realization is non-trivial. In Ref. [1], we proved that the integral equation is ill-posed, i.e., the solution is unique but unstable. The uncertainty of the solution could be arbitrarily large even if the error of the perturbative inputs is small.

Li proposed an inverse matrix method based on the expansion of Laguerre polynomials [3], and has applied it to a wide range of physical problems, including hadron spectra, neutral meson mixing, and light-cone distribution amplitudes [4, 5, 6, 7, 8, 9, 10, 11]. The inverse matrix method is physically intuitive, yet its mathematical foundation remains unclear, which is particularly important for analyzing uncertainties.

Based on rigorous mathematics, we employ Tikhonov regularization to obtain stable approximate solutions in Ref. [1]. More importantly, as the error of the inputs δ→0\delta\to0, the regularized solution converges to the true solution. The framework in [1] was tested only with toy models. Here we apply it to a specific physical problem. As the lightest hadron, the pion is easily produced in experiments. Using the inverse problem approach, we calculate the pion decay constant, whose experimental measurement is very precise and is commonly used to test the applicability of non-perturbative QCD methods.

One of the advantages of the inverse problem approach is that it solves the entire non-perturbative range simultaneously, including the ground state, excited states, and the continuum spectrum. By contrast, in many other methods one usually has to solve the ground state first and then the excited states one by one. As a result, the uncertainties of the excited states grow progressively larger, making reliable information on the excited states difficult to obtain. The situation is even worse for the continuum spectrum. In this work, we simultaneously extract the decay constants of the pion and a1(1260)a_1(1260), together with the continuum spectral function, from the axial-vector current. Our result for the pion decay constant is in good agreement with the experiment. The total spectrum also agrees well with the ALEPH data on τ\tau decays in the axial-vector channel. This agreement holds over the entire relevant range of the invariant mass squared, from (3mπ)2(3m_\pi)^2 to mτ2∼3.16 GeV2m_\tau^2 \sim3.16\ \mathrm{GeV}^2, including both the a1(1260)a_1(1260) peak and the continuum spectral function. See Figure 4 and Table 2.

Figure 4. Final results of the decay constants and spectral function obtained from the inverse problem approach. The continuum contribution ρc(s)\rho^{c}(s) (red solid line), the a1(1260)a_{1}(1260) resonance contribution (red dashed line), and the total spectral function ρ(s)\rho(s) (blue solid line, with shaded uncertainty band) are shown, while the pion and a1(1260)a_{1}(1260) decay constants are given in the inset. Black dots with error bars are experimental data.

Methodfπf_{\pi} [MeV]fa1(1260)f_{a_1(1260)} [MeV]
This work130.8±8.1130.8 \pm8.1274.9±13.7274.9 \pm13.7
Experiment130.57±0.14130.57 \pm0.14 [21]
Lattice QCD130.20±0.80130.20 \pm0.80 [28]240.0±28.5240.0 \pm28.5 [29]
QCDSR (Πq\Pi_q)127±15127 \pm15 [14], 135±1135 \pm1 [20]151±20151 \pm20 [20]
QCDSR (Πg\Pi_g)238±10238 \pm10 [30]

Table 2. Decay constants of pion and a1(1260)a_1(1260). Our results are compared with experimental data, as well as determinations from lattice QCD and the QCD sum rules. For QCD sum-rule calculations, the correlation functions Πq\Pi_q and Πg\Pi_g are adopted respectively.

A key criterion for evaluating a theoretical method is whether it can estimate its systematic uncertainties, such as those arising from the assumptions or approximations it makes. Owing to its rigorous mathematical foundation, the inverse problem approach is capable of analyzing both the input-induced and method-intrinsic uncertainties, as shown in Table 1. Tikhonov regularization guarantees convergence of the regularized solution to the true solution as the input error δ→0\delta\to0, with the regularization parameter α\alpha determined mathematically by the quasi-optimality criterion rather than by artificial choices. On the one hand, the approximation error arising from the finite value of α\alpha can be estimated via ∥RαKf−f∥\lVert R_\alpha Kf-f\rVert, which represents a systematic uncertainty inherent to the method itself. On the other hand, the results are insensitive to all parameters appearing in the method, making it possible to estimate the systematic uncertainties arising from them. Furthermore, the convergence as the input error decreases ensures that the precision of the solution in the inverse problem approach can be systematically improved.

SourcePrescriptionΔfπ\Delta f_{\pi} [MeV]Δfa1\Delta f_{a_1} [MeV]
Input Errorsmu(d)m_{u(d)}2.16±0.04 (4.70±0.04)2.16 \pm0.04\ (4.70 \pm0.04) [MeV]0.01
Input Errors⟨qˉq⟩\langle\bar{q}q\rangle−(0.272±0.005)3-(0.272 \pm0.005)^3 [GeV]3^30.57
Input Errors⟨αsGG⟩\langle\alpha_s GG\rangle0.07±0.020.07 \pm0.02 [GeV4^4]3.51
Input ErrorsMa1(1260)M_{a_1(1260)}1202±151202 \pm15 [MeV]0.78
Input ErrorsΓa1(1260)\Gamma_{a_1(1260)}422±12422 \pm12 [MeV]0.08
Input Errorsμ\mu[1, 3] GeV0.77
Input ErrorsOPE truncationdim-6 operators6.73
Total input-induced uncertainty7.69
Method Errorsα\alpha4×10−164 \times10^{-16}0.34
Method ErrorsΛ\Lambda[5, 10] GeV2^22.11
Method Errorsqup2q_{\mathrm{up}}^2[−20-20, −6-6] GeV2^21.19
Method Errorsqlow2q_{\mathrm{low}}^2[−300-300, −100-100] GeV2^20.08
Method Errorsσ0\sigma_0[−1000-1000, −400-400] GeV2^20.02
Total method-intrinsic uncertainty2.45
Total uncertainty8.07

Table 1. input-induced uncertainties and method-intrinsic uncertainties of fπf_{\pi} and fa1(1260)f_{a_1(1260)}.

As a novel non-perturbative method, the inverse problem approach exhibits several distinctive features and yields interesting physical results. It reproduces quark-hadron duality at high energy scales, while explicitly violating it at low-energy scales. At scales larger than Λ∼5\Lambda\sim5–10 GeV210\ \mathrm{GeV}^2, perturbative and OPE calculations are taken as input, whereas at scales smaller than Λ\Lambda, non-perturbative quantities are to be solved. As shown in Figure 4, the solution from around 4 GeV24\ \mathrm{GeV}^{2} upward is very close to the OPE spectrum, indicating that duality is naturally restored at high energy scales. The duality violation can also be estimated numerically to be about (1–4)%(1\text{--}4)\% in the range 5–10 GeV25\text{--}10\ \mathrm{GeV}^{2}. Given the uncertainties in the OPE calculations, this is small, so quark–hadron duality is a good approximation at high energy scales. In contrast, in the low-energy region, the duality is explicitly violated due to the existence of the pion pole and the a1(1260)a_{1}(1260) resonance. Unlike QCD sum rules where quark–hadron duality is assumed at low energy scales [12, 13], the inverse problem approach does not require the effective threshold parameter s0s_{0}, thus avoiding the associated uncertainties. It also does not require Borel transformation, and our numerical results are indistinguishable with and without it. Moreover, this approach can systematically analyze how different parts of the input affect the solution. For example, we can examine the contributions to fπf_{\pi}, fa1f_{a_{1}} and the continuum spectrum, from leading-order and next-to-leading-order perturbative calculations and from each condensate component, respectively.

The organization of this paper is as follows. The theoretical framework of the inverse-problem approach is introduced in § 2. The numerical results are presented in § 3. Physical implications are discussed in § 5. A summary is given in § 6.

Theoretical Framework

In this section, we present the theoretical framework for extracting the pion decay constant using the inverse problem approach. This approach was originally introduced and systematically developed in Ref. [1]. It focuses primarily on the underlying mathematical formalism and employs three toy models to illustrate the effectiveness of regularization methods in addressing the ill-posedness of inverse problems. In this work, we demonstrate the utility and potential of the inverse problem approach for non-perturbative QCD by applying it to calculate the decay constants of pion and excited states, as well as the continuum spectral function.

We begin with the correlation function used to extract the pion decay constant, along with its dispersion relation and the corresponding operator product expansion (OPE) input. Subsequently, we formulate the dispersion relation as an inverse problem, using the OPE input to reconstruct non-perturbative quantities including the pion decay constant and the spectral function. Finally, we briefly outline the Tikhonov regularization procedure to solve the ill-posedness of the inverse problem.

Correlation Function and Dispersion Relation

The decay constant of pion fπf_{\pi} is defined by the matrix element

⟨0∣jμ5∣π⟩≡ifπpμπ,(1)\langle0|j_{\mu5}|\pi\rangle\equiv i f_{\pi}p_{\mu}^{\pi}, \tag*{(1)}

where jμ5=uˉγμγ5dj_{\mu5}=\bar{u}\gamma_{\mu}\gamma_{5}d denotes the axial-vector current and pπp^{\pi} is the pion momentum. As in QCD-based approaches, the determination of such quantities begins with the construction of the appropriate correlation functions. Based on Eq. (1), we consider the following correlation function

Π5μν(q)=i∫d4x eiq⋅x⟨0∣T{jμ5(x)jν5†(0)}∣0⟩=−gμνΠg(q2)+qμqνΠq(q2),(2)\Pi_{5\mu\nu}(q)=i\int d^{4}x\,e^{iq\cdot x}\langle0|T\{j_{\mu5}(x)j_{\nu5}^{\dagger}(0)\}|0\rangle=-g_{\mu\nu}\Pi_{g}(q^{2})+q_{\mu}q_{\nu}\Pi_{q}(q^{2}), \tag*{(2)}

with the QCD non-perturbative vacuum ∣0⟩|0\rangle.

In the deep Euclidean region, q2≪0q^{2}\ll0, the correlation function is calculable within the OPE. By contrast, in the timelike region, q2>0q^{2}>0, the correlation function encodes hadronic information. Inserting a complete set ∑n∣n⟩⟨n∣\sum_{n}|n\rangle\langle n| of hadronic states that couple to jμ5j_{\mu5}, we obtain

2Im⁡Π5μν(q)=∑n⟨0∣jμ5∣n⟩⟨n∣jν5†∣0⟩dϕn(2π)4δ4(q−pn),(3)2\operatorname{Im}\Pi_{5\mu\nu}(q)=\sum_{n}\langle0|j_{\mu5}|n\rangle\langle n|j_{\nu5}^{\dagger}|0\rangle d\phi_{n}(2\pi)^{4}\delta^{4}(q-p_{n}), \tag*{(3)}

where dϕnd\phi_{n} and pnp_{n} denote the phase space and the momentum of state ∣n⟩|n\rangle, respectively. The details of the phase spaces and their integration can be seen in [14, 15].

For the axial-vector current jμ5j_{\mu5}, the complete set {∣n⟩}\{|n\rangle\} includes pseudoscalar states such as ∣π⟩|\pi\rangle, axial-vector states such as ∣a1⟩|a_{1}\rangle, and continuum states such as ∣3π⟩|3\pi\rangle and ∣5π⟩|5\pi\rangle. Consequently, the correlator in Eq. (3) encodes both the pion decay constant fπf_{\pi} defined in Eq. (1), and the decay constant fa1f_{a_{1}} of the axial-vector state, defined as follows

⟨0∣jμ5∣a1⟩≡ϵμa1fa1Ma1,(4)\langle0|j_{\mu5}|a_{1}\rangle\equiv\epsilon_{\mu}^{a_{1}}f_{a_{1}}M_{a_{1}}, \tag*{(4)}

where ϵμa1\epsilon_{\mu}^{a_{1}} and Ma1M_{a_{1}} are the polarization vector and mass of a1a_{1}, respectively.

The pion matrix element in Eq. (1) is proportional to the pion momentum pμp_{\mu}, while the axial-vector matrix element in Eq. (4) contains the polarization vector ϵμ\epsilon_{\mu}. Consequently, the invariant amplitude Πg(q2)\Pi_{g}(q^{2}) in Eq. (2) with structure gμνg_{\mu\nu} includes only the contribution a1a_{1}, while Πq(q2)\Pi_{q}(q^{2}) receives contributions from both the pion and a1a_{1}. To determine fπf_{\pi} and compare it with experiment, we therefore focus our analysis on the invariant amplitude Πq(q2)\Pi_{q}(q^{2}).

References

  1. [1]A. S. Xiong, F. S. Yu, Y. Zheng and T. Wei, “Inverse Problem Approach for Non-Perturbative QCD: Theoretical Foundation,” [arXiv:2211.13753].arxiv.org/abs/2211.13753
  2. [2]H. N. Li, H. Umeeda, F. Xu and F. S. Yu, “D meson mixing as an inverse problem,” Phys. Lett. B 810 (2020), 135802 [arXiv:2001.04079 [hep-ph]].DOI
  3. [3]H. n. Li, “Dispersive analysis of glueball masses,” Phys. Rev. D 104 (2021), 114017 [arXiv:2109.04956 [hep-ph]].DOI
  4. [4]H. n. Li and H. Umeeda, “Vacuum polarization contribution to muon g − 2 as an inverse problem,” Phys. Rev. D 102 (2020), 094003 [arXiv:2004.06451 [hep-ph]].DOI
  5. [5]H. n. Li and H. Umeeda, “QCD sum rules with spectral densities solved in inverse problems,” Phys. Rev. D 102 (2020), 114014 [arXiv:2006.16593 [hep-ph]].DOI
  6. [6]H. n. Li, “Dispersive derivation of the pion distribution amplitude,” Phys. Rev. D 106 (2022), 034015 [arXiv:2205.06746 [hep-ph]].DOI
  7. [7]H. n. Li, “Dispersive analysis of neutral meson mixing,” Phys. Rev. D 107 (2023), 054023 [arXiv:2208.14798 [hep-ph]].DOI
  8. [8]H. n. Li, “Dispersive Analysis of Excited Glueball States,” Chin. Phys. Lett. 41 (2024), 101101 [arXiv:2408.06738 [hep-ph]].DOI
  9. [9]Z. X. Zhao, Y. P. Xing and R. H. Li, “A progress in the inverse matrix method in QCD sum rules,” Eur. Phys. J. C 84 (2024), 1105 [arXiv:2407.09819 [hep-ph]].arxiv.org/abs/2407.09819
  10. [10]H. Mutuk, “Reappraisal of the rho meson in nuclear matter by the inverse QCD sum rules method,” Phys. Rev. D 111 (2025), 094029 [arXiv:2503.10343 [hep-ph]].DOI
  11. [11]S. Zeng, H. n. Li and F. Xu, “Light baryon static properties in a dispersive approach,” Phys. Rev. D 113 (2026), 114050 [arXiv:2603.15989 [hep-ph]].arxiv.org/abs/2603.15989
  12. [12]M. A. Shifman, A. I. Vainshtein and V. I. Zakharov, “QCD and Resonance Physics. Theoretical Foundations,” Nucl. Phys. B 147 (1979), 385-447.
  13. [13]M. A. Shifman, A. I. Vainshtein and V. I. Zakharov, “QCD and Resonance Physics: Applications,” Nucl. Phys. B 147 (1979), 448-518.
  14. [14]P. Colangelo and A. Khodjamirian, “QCD sum rules, a modern perspective,” [arXiv:hep-ph/0010175 [hep-ph]].
  15. [15]A. Khodjamirian, “Hadron Form Factors,” CRC Press, 2020, ISBN 978-1-138-30675-2, 978-1-315-14200-5. DOI:10.1201/9781315142005DOI
  16. [17]S. Aoki et al. [Flavour Lattice Averaging Group], Eur. Phys. J. C 80 (2020) no.2, 113 doi:10.1140/epjc/s10052-019-7354-7 [arXiv:1902.08191 [hep-lat]].
  17. [18]S. Narison, “Mini-review on QCD spectral sum rules,” Nucl. Part. Phys. Proc. 258-259 (2015), 189-194 [arXiv:1409.8148 [hep-ph]].arxiv.org/abs/1409.8148
  18. [19]D. M. Asner et al. [CLEO], “Hadronic structure in the decay tau- —> tau-neutrino pi- pi0 pi0 and the sign of the tau-neutrino helicity,” Phys. Rev. D 61 (2000), 012002 [arXiv:hep-ex/9902022 [hep-ex]].DOI
  19. [20]J. F. Jiang and S. L. Zhu, “Radial excitations of mesons and nucleons from QCD sum rules,” Phys. Rev. D 92 (2015), 074002 [arXiv:1508.00677 [hep-ph]].DOI
  20. [21]F. Takahashi et al. [Particle Data Group], “Review of Particle Physics,” Int. J. Mod. Phys. A 41 (2026) no.22, 2630011.
  21. [22]M. G. Bowler, “The A1 Revisited,” Phys. Lett. B 182 (1986), 400-404.DOI
  22. [23]R. Aaij et al. [LHCb], “Studies of the resonance structure in D0 → K-π+π-π+ decays,” Eur. Phys. J. C 78 (2018) no.6, 443 [arXiv:1712.08609 [hep-ex]].
  23. [24]S. Schael et al. [ALEPH], “Branching ratios and spectral functions of tau decays: Final ALEPH measurements and physics implications,” Phys. Rept. 421 (2005), 191-284 [arXiv:hep-ex/0506072 [hep-ex]].
  24. [25]A. Pich, “Precision Tau Physics,” Prog. Part. Nucl. Phys. 75 (2014), 41-85 [arXiv:1310.7922 [hep-ph]].DOI
  25. [26]M. Davier, A. Höcker, B. Malaescu, C. Z. Yuan and Z. Zhang, “Update of the ALEPH non-strange spectral functions from hadronic τ decays,” Eur. Phys. J. C 74 (2014), 2803 [arXiv:1312.1501 [hep-ex]].DOI
  26. [27]ALEPH Collaboration, Numerical spectral function files: https://aleph.web.lal.in2p3.fr/tau/specfun13.html
  27. [28]Y. Aoki et al. [Flavour Lattice Averaging Group (FLAG)], “FLAG review 2024,” Phys. Rev. D 113 (2026), 014508 [arXiv:2411.04268 [hep-lat]].arxiv.org/abs/2411.04268
  28. [29]M. Wingate, T. A. DeGrand, S. Collins and U. M. Heller, “Properties of the a1 meson from lattice QCD,” Phys. Rev. Lett. 74 (1995), 4596-4598 [arXiv:hep-ph/9502274 [hep-ph]].DOI
  29. [30]K. C. Yang, “Light-cone distribution amplitudes of axial-vector mesons,” Nucl. Phys. B 776 (2007), 187-257 [arXiv:0705.0692 [hep-ph]].DOI
  30. [31]D. Gomez Dumm, A. Pich and J. Portoles, “tau —> pi pi pi nu(tau) decays in the resonance effective theory,” Phys. Rev. D 69 (2004), 073002 [arXiv:hep-ph/0312183 [hep-ph]].
  31. [32]S. Narison, “QCD parameters and SM-high precision from e⁺e⁻ to Hadrons: Updated,” Nucl. Phys. A 1046 (2024), 122873 [erratum: Nucl. Phys. A 1050 (2024), 122915] [arXiv:2402.13983 [hep-ph]].DOI
  32. [33]M. Ablikim et al. [BESIII], “Measurement of the Cross Section for e⁺e⁻ →Hadrons at Energies from 2.2324 to 3.6710 GeV,” Phys. Rev. Lett. 128 (2022), 062004 [arXiv:2112.11728 [hep-ex]].DOI
  33. [34]M. A. Shifman, “Quark hadron duality,” [arXiv:hep-ph/0009131 [hep-ph]].
  34. [35]I. I. Y. Bigi and N. Uraltsev, “A Vademecum on quark hadron duality,” Int. J. Mod. Phys. A 16 (2001), 5201-5248 [arXiv:hep-ph/0106346 [hep-ph]].DOI
  35. [36]T. Jubb, M. Kirk, A. Lenz and G. Tetlalmatzi-Xolocotzi, “On the ultimate precision of meson mixing observables,” Nucl. Phys. B 915 (2017), 431-453 [arXiv:1603.07770 [hep-ph]].DOI
  36. [37]J. P. Zhang, X. L. Chen and W. Chen, “An improved moment QCD sum rule,” [arXiv:2607.11536 [hep-ph]].
  37. [38]P. Gubler and M. Oka, “A Bayesian approach to QCD sum rules,” Prog. Theor. Phys. 124 (2010), 995-1018 [arXiv:1005.2459 [hep-ph]].DOI
  38. [39]T. Aoyama, et al. “The anomalous magnetic moment of the muon in the Standard Model,” Phys. Rept. 887 (2020), 1-166 [arXiv:2006.04822 [hep-ph]].DOI
  39. [40]S. Weinberg, “Precise relations between the spectra of vector and axial vector mesons,” Phys. Rev. Lett. 18 (1967), 507-509.DOI
  40. [41]M. Gonzalez-Alonso, A. Pich and J. Prades, “Determination of the Chiral Couplings L(10) and C(87) from Semileptonic Tau Decays,” Phys. Rev. D 78 (2008), 116012 [arXiv:0810.0760 [hep-ph]].
  41. [42]H. B. Meyer, “Transport Properties of the Quark-Gluon Plasma: A Lattice QCD Perspective,” Eur. Phys. J. A 47 (2011), 86 [arXiv:1104.3708 [hep-lat]].DOI

Paper details

vlnc:W_vtgd6a4t
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 2

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents