betaFeedback

WorksPhysics and Astronomy

Thermal and geometric normal modes of spectral fluctuations in heavy-ion collisions

Abstract

The transverse momentum spectrum of charged particles in ultra-relativistic heavy-ion collisions fluctuates event-by-event, encoding signatures of underlying collective dynamics. Such fluctuations originate from a combined effect of thermal and geometric fluctuations in the initial state. We present a direct decomposition of these spectral fluctuations through principal component analysis performed on the joint covariance structure of normalized spectrum, mean transverse momentum and elliptic flow squared. The first two leading modes explain 99.5% of the total variance, and are orthogonally rotated by imposing physical constraints motivated by the initial state thermal and geometric response. The resulting thermal and geometric modes bear direct analogy with the vibrational normal modes of a linear triatomic molecule. The thermal mode entirely drives the experimentally measured v0(pT)v_0(p_T), while the geometric mode contributes substantially to v02(pT)v_{02}(p_T) in non-central collisions, providing a transparent explanation of its characteristic low-pTp_T sign change. The study establishes the first physically motivated interpretation of principal component modes in the field of heavy-ion collisions and provides an experimental window into the thermo-geometric structure of the QGP initial state.

Introduction

Ultra-relativistic heavy-ion collision at the LHC creates a hot, dense Quark-Gluon-Plasma medium offering a unique opportunity to study the dynamics of the matter under extreme condition [1, 2, 3, 4, 5]. The characteristics of the initial fireball created immediately after the collision are accessed through the properties of the final state particles detected in the experiments. In particular, the mean transverse momentum per particle ([pT][p_{T}]) in an event has traditionally been associated with the transverse size (R2R^{2}) of the fireball [6, 7, 8]. However, more recent studies have established it as a reflection of the effective temperature (TT) of the fireball characterized by its entropy density (S/VS/V) [9, 10], where SS is the total deposited entropy and VV is the effective volume. The elliptic flow (v2v_{2}) of the particles is governed by the shape of the initial fireball, and it is linearly related to the initial eccentricity (ϵ2\epsilon_{2}) on transverse plane [11, 12, 13, 14, 15, 16, 17].

Event-by-event fluctuations of these final state observables are a direct consequence of initial state fluctuations. Fluctuations of [pT][p_{T}] are predominantly driven by the fluctuations of the effective temperature reflecting volume fluctuations at fixed entropy density [9, 10, 18, 19, 20]. Its pTp_{T}-differential map is constructed by correlating it with the event-by-event particle spectrum (N(pT)N(p_{T})), known as radial flow and denoted by v0(pT)v_{0}(p_{T}) [21, 22, 23, 24, 25, 26, 27, 28]. The observable v0(pT)v_{0}(p_{T}) serves as a direct probe of the collective dynamics of the QGP fireball and has been recently measured in the experiments [29, 30]. The fluctuation of event-by-event elliptic flow squared (v22v_{2}^{2}) on the other hand is primarily driven by fluctuations of event-by-event participant eccentricity squared (ϵ22\epsilon_{2}^{2}) of the fireball [31, 32, 33, 34, 35, 36, 37] which is strongly correlated with the collision impact parameter. Pearson correlation coefficient between [pT][p_{T}] and the elliptic flow squared (v22v_{2}^{2}), called the Bożek’s correlator [38], can therefore serve as an excellent probe of the thermo-geometric coupling in the initial state at fixed initial entropy which is equivalent to fixed multiplicity in the experiment [21, 39, 40, 41, 42, 43, 44, 45, 46]. The pTp_{T}-differential version of this correlator is the recently proposed observable v02(pT)v_{02}(p_{T}), constructed by correlating N(pT)N(p_{T}) and v22v_{2}^{2} [47]. v02(pT)v_{02}(p_{T}) being a three particle correlator, is non-flow suppressed, making it a cleaner probe of the collective dynamics in comparison to v0(pT)v_{0}(p_{T}).

The correlator v02(pT)v_{02}(p_{T}) therefore serves as a differential probe of the thermo-geometric coupling in the initial state which results in correlated event-by-event fluctuations of N(pT)N(p_{T}) and v22v_{2}^{2}. As shown in reference [47], v02v_{02} can be decomposed into two components: one part corresponding to the fluctuations of N(pT)N(p_{T}) associated with [pT][p_{T}] fluctuations at fixed v22v_{2}^{2}, while the other part captures the fluctuation of spectra associated with v22v_{2}^{2} at fixed [pT][p_{T}]. These two components can be regarded as response coefficients or modes, and could be extracted from event-by-event or smooth hydro simulations [47]. However, the physical origin of these components and in particular characteristic double sign change of v02(pT)v_{02}(p_{T}) in non-central collisions remain unexplained. Moreover, this is an indirect approach in the sense that the response coefficients can be obtained by performing a fit over events at each pTp_{T}-bin1, and such decomposition is performed as a response to the final state observables, not as a response from the initial state2 which would carry more robust physical significance.

In this letter, we propose a direct approach to decouple the thermal and non-thermal (which we call geometric3) modes of the event-by-event spectral fluctuations identified as a response of the corresponding initial state effects. We perform a principal component analysis [48, 49, 50] (PCA) on the joint covariance matrix constructed with normalized spectrum (N(pT)N(p_T)), mean transverse momentum [pT][p_T] and elliptic flow squared v22v_2^2. The reason for such choice of augmented structure is to connect the principal modes obtained from PCA to the experimentally accessible observables v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T). Without augmenting, by performing a PCA on the spectral covariance alone, the physical modes can still be approximately obtained, but no connection to the experimentally measurable observables can be established.

Moreover, principal components are not in general physical modes. In this paper we show how one can connect the principal modes obtained from such PCA, to the physical modes of initial state response. Augmenting the spectral covariance matrix comes at the expense of a forced non-trivial mixing of the physical modes into the principal modes, since v02(pT)v_{02}(p_T), carrying substantial geometric content, is now part of the covariance matrix. This mixing may be small in non-central collisions where the geometric source variance is naturally large, and the principal modes are already approximately aligned with the physical directions, but can be substantial in central collisions where the geometric variance is strongly suppressed, and the geometric information enters the covariance matrix predominantly through v02(pT)v_{02}(p_T).

We show that the original principal modes can be transformed through an orthogonal rotation by imposing physical constraints to align with the thermal and non-thermal bases. Such methods for realizing physical meaning of PC modes have been widely used and are popular in the field of meteorology [51, 52]. The thermal mode maximizes the coherent fluctuations4 of the spectra with a single sign change or node in pTp_T. We label the non-thermal mode as geometric since at fixed entropy density (s(T)s(T)), the variation of effective volume is strongly correlated with variation of total entropy resulting in eccentricity fluctuations. Such eccentricity fluctuations lead to non-trivial fluctuations of the spectra and therefore mean transverse momentum of the particles, explaining the correlation between [pT][p_T] and v22v_2^2. To gain better insights about these physical modes we draw an analogy to the normal modes of a coupled oscillator, in particular with the case of a linear triatomic molecule. Furthermore, we show that thermal and geometric modes can be experimentally accessed via the observables v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) by quantifying the mixing coefficients based on our analysis.

Spectral fluctuations and PCA

Traditionally principal component analysis has been used to find the dominant components in a fluctuating system. It has been applied in heavy-ion physics to analyze and identify the dominant contributions to the flow fluctuations and their correlations [48, 49, 50, 53, 54, 55, 56]. In reference [49], the principal components of the flow fluctuations were related to the initial state predictor noting that the modes of the radial flow fluctuation can reveal crucial information on the initial state. It is a general conviction that principal components carry no physical meaning a priori—an issue already raised in [56]. Therefore, a proper physical identification of principal components with initial state effects is yet to be addressed. Moreover, applying PCA on spectra alone does not establish any connection to experimentally accessible observables. In this paper we precisely address both of these issues.

We simulate 5000 Pb+Pb collisions at a center of mass energy sNN=5.02\sqrt{s_{NN}} = 5.02 TeV, with fluctuating initial conditions using TRENTO [57], and evolving them through viscous hydrodynamics using MUSIC [58] with a constant shear viscosity to entropy ratio η/s=0.08\eta/s = 0.08, similar to [59]. We then compute event-by-event normalized spectrum N(pT)≡(1/N)dN/dpTN(p_T) \equiv(1/N)dN/dp_T where NN is the event multiplicity, mean transverse momentum per particle [pT][p_T] and elliptic flow squared v22v_2^2 following a similar method as described in [47], to be directly used in PCA.

We perform PCA on the normalized joint covariance matrix of N(pT)N(p_T), [pT][p_T] and v22v_2^2. We choose normalizations in such a way that the N(pT)N(p_T)–[pT][p_T] and N(pT)N(p_T)–v22v_2^2 blocks match the precise definitions of v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) as used in [22, 47]. In particular, we normalize the pTp_T-spectrum and elliptic flow squared by their event-averages, whereas the mean transverse momentum is normalized by its standard deviation over events. With this choice, the normalized covariance matrix takes the following form:

Σ=(CN1,N1…CN1,Nj…CN1,[pT]CN1,v22⋮⋮⋮⋮CNi,N1…CNi,Nj…CNi,[pT]CNi,v22⋮⋮⋮⋮)(1)\Sigma= \begin{pmatrix} C_{N_1,N_1} & \ldots& C_{N_1,N_j} & \ldots& C_{N_1,[p_T]} & C_{N_1,v_2^2} \\ \vdots& & \vdots& & \vdots& \vdots\\ C_{N_i,N_1} & \ldots& C_{N_i,N_j} & \ldots& C_{N_i,[p_T]} & C_{N_i,v_2^2} \\ \vdots& & \vdots& & \vdots& \vdots \end{pmatrix} \tag*{(1)}

where

CNi,Nj=⟨δN(pTi)δN(pTj)⟩⟨N(pTi)⟩⟨N(pTj)⟩C_{N_i,N_j} = \frac{\langle\delta N(p_{T_i})\delta N(p_{T_j})\rangle} {\langle N(p_{T_i})\rangle\langle N(p_{T_j})\rangle}
CNi,[pT]=⟨δN(pTi)δpT⟩⟨N(pTi)⟩σpT=v0(pTi)C_{N_i,[p_T]} = \frac{\langle\delta N(p_{T_i})\delta p_T\rangle} {\langle N(p_{T_i})\rangle\sigma_{p_T}} = v_0(p_{T_i})

and

CNi,v22=⟨δN(pTi)δv22⟩⟨N(pTi)⟩⟨v22⟩=v02(pTi) .(2)C_{N_i,v_2^2} = \frac{\langle\delta N(p_{T_i})\delta v_2^2\rangle} {\langle N(p_{T_i})\rangle\langle v_2^2\rangle} = v_{02}(p_{T_i}) \, . \tag*{(2)}

where the indices i,ji,j denote pTp_T-bins, δX=X−⟨X⟩\delta X = X - \langle X\rangle and the angular bracket ⟨…⟩\langle\ldots\rangle denotes average over events.

The principal component decomposition of Σ\Sigma can be written as:

Σ=EΛET=∑iλieieiT(3)\Sigma= E\Lambda E^T = \sum_i \lambda_i e_i e_i^T \tag*{(3)}

where λi\lambda_i’s are the eigenvalues of Σ\Sigma, representing the diagonal elements of Λ\Lambda, and eie_i’s are the eigenvectors representing columns of EE. The eigenvectors are orthonormal by construction. They have a pTp_T-dependent part and an pTp_T-independent scalar part corresponding to [pT][p_T] and v22v_2^2,

ei=[ei(pT1) ei(pT2) …ei(pTj) …li[pT] liv22](4)e_i = [e_i(p_{T_1})\ e_i(p_{T_2})\ \ldots e_i(p_{T_j})\ \ldots l_i^{[p_T]}\ l_i^{v_2^2}] \tag*{(4)}

where the pTp_T-dependent part ei(pT)e_i(p_T) is the iith principal direction or principal mode, and li[pT]l_i^{[p_T]} and liv22l_i^{v_2^2} are the scalar components of the iith eigenvector corresponding to [pT][p_T] and v22v_2^2 respectively. It turns out that 99.5% variance of Σ\Sigma can be explained by the first two leading principal components. The observables v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) are related to these principal components via

v0(pT)=∑iλili[pT]ei(pT)=∑iwi0ei(pT)v_0(p_T) = \sum_i \lambda_i l_i^{[p_T]} e_i(p_T) = \sum_i w_i^0 e_i(p_T)
v02(pT)=∑iλiliv22ei(pT)=∑iwiv02ei(pT)(5)v_{02}(p_T) = \sum_i \lambda_i l_i^{v_2^2} e_i(p_T) = \sum_i w_i^{v_{02}} e_i(p_T) \tag*{(5)}

where wi=λiliw_i = \lambda_i l_i represents the weight corresponding to the iith principal mode. In our particular case, only the first two principal modes (i=1,2i = 1, 2) are enough for the full reconstruction of the observables in Eq. (5).

Since the principal modes ei(pT)e_i(p_T)’s have no physical meaning a priori, one needs to impose suitable physical constraints and transform them accordingly to extract physical information by completely aligning them along pure physical modes.

Thermal and geometric normal modes

To fully decouple the principal modes into pure thermal and geometric modes, physical constraints motivated by the initial state thermodynamics must be imposed. The leading cause for the spectral fluctuation between two events is the change in effective temperature [9, 10] of the fireball which depends on the initial entropy density s(T)s(T) given by total deposited entropy (SS) divided by the effective volume V=(R02)3/2V = (R_0^2)^{3/2}. In a given centrality bin, at fixed eccentricity (ϵ2\epsilon_2), both SS and VV can fluctuate in a weakly correlated manner. Such weak correlation suggests that at fixed VV, SS can fluctuate significantly and vice versa, both of which can result in fluctuations in ss, and therefore of TT. Temperature fluctuations cause fluctuations of pTp_T-spectra and so of [pT][p_T]. This is shown in panel (a) of Figure 1, where we show the scatter plot between [pT][p_T] and ss at fixed ϵ22\epsilon_2^2 in Pb+Pb collision for 30–40 % centrality. The Pearson correlation coefficient rr between [pT][p_T] and ss for these events is very large (r=0.93r = 0.93). Such strong correlation is a manifestation of the correlation between spectra (N(pT)N(p_T)) and effective temperature (s(T)s(T)).

Figure 1. (a) Scatter plot between event-by-event mean transverse momentum and entropy density for 5000 events in Pb+Pb collision at 5.02 TeV. Events at fixed eccentricity are shown in blue, with the full event sample shown in gray for reference. The coefficient rr denotes the Pearson correlation coefficient between mean transverse momentum [pT][p_T] and ss at fixed ϵ22\epsilon_2^2. (b) Similar scatter plot between mean transverse momentum and eccentricity squared. The events at fixed entropy density are shown in dark red and rr denotes the Pearson correlation coefficient between [pT][p_T] and ϵ22\epsilon_2^2 for those events.

An increase in temperature always leads to production of less number of soft particles and more number of hard particles [22, 29]—hereby referred as coherent change of the spectrum. Such changes are pivoted by the cartoon in panel (c) of Figure 2. We identify such mode of the spectral fluctuations as the coherent mode having a single node in pTp_T in an analogy to symmetric stretching of a linear triatomic molecule (e.g. CO2\mathrm{CO}_2), illustrated by the cartoon in panel (a) of Figure 2. As in the symmetric stretching mode, the atoms in the either sides of the triatomic molecule moves in opposite direction keeping the middle one fixed, in the coherent mode of spectral fluctuation with the increase of effective temperature of the fireball the normalized spectra below ⟨pT⟩\langle p_T\rangle moves downwards and the part above it moves upwards.

Figure 2. (a) Cartoon of the symmetric stretching (coherent) mode of vibration in a linear triatomic molecule, where the middle atom denoted by red remains at rest while the atoms on either side, denoted by blue, move in opposite directions. (b) Asymmetric vibrational mode of the molecule where the atoms on either side move in same direction and the middle atom moves in opposite direction. (c) Pictorial depiction of fluctuation of normalized transverse momentum spectra in two events caused by thermal fluctuations due to entropy density fluctuations at fixed eccentricity. An increase in effective temperature in the initial state leads to smaller number of soft particles and larger number of hard particles, a change that is coherent in nature pivoted at ⟨pT⟩\langle p_T \rangle denoted by the vertical dashed line. The hotter fireball denoted by bright red color correspond to the green spectrum, whereas the colder fireball is represented by light red color corresponding to the spectrum in blue. (d) Similar cartoon of spectra and initial fireball at fixed S/VS/V, causing the spectra to intersect two times. To maintain same effective temperature the total entropy and effective volume needs to change simultaneously. A decrease in effective volume is an outcome of larger impact parameter, hence larger ϵ2\epsilon_2. (e) Thermal normal mode of spectral fluctuation in Pb+Pb collision at 5.02 TeV for 30–40% centrality, plotted as a function of pTp_T having a single node. (f) Geometric normal mode having characteristic double sign change in same centrality class

To obtain such a mode from our original principal modes (ei(pT)e_i(p_T)), we apply an orthogonal rotation on the original modes such that the event-by-event coherent changes in the spectra is maximized, hence called the maximal coherence criterion. In particular, we make the following transformation on the original principal component bases for each pTp_T bin:

(eTeG)=(cos⁡θsin⁡θ−sin⁡θcos⁡θ)(e1e2)(6)\begin{pmatrix} e_T \\ e_G \end{pmatrix} = \begin{pmatrix} \cos\theta& \sin\theta\\ -\sin\theta& \cos\theta\end{pmatrix} \begin{pmatrix} e_1 \\ e_2 \tag*{(6)} \end{pmatrix}

where the pTp_T dependence of the modes on either side of the equation is implicit. The angle θ\theta is the global optimal angle of rotation applied uniformly across all pTp_T-bins and is obtained by a weighted least squares of the optimal angles corresponding to each pTp_T-bin. The mathematical justification for such rotation, rooted in rigorous connection between PC eigenmodes and the initial state thermal and geometric response functions (physical modes), is provided in Appendix A. The global optimal angle θ\theta is derived in Appendix B via the maximal coherence criterion, and independently determined in Appendix C by imposing a physical condition. The two methods agree to within 3 % of the total rotation range.

By maximizing the coherent deformation of the spectrum we contain all the fluctuations coming out of thermal effect in a single pure mode eTe_T, hence labeled as thermal mode. The thermal mode is shown in panel (e) of Figure 2. We show results for 30-40 % centrality where the original principal modes are apprioximately aligned along physical directions, hence the orthogonal rotation plays small role5 although essential for the physical identification. It is negative below ⟨pT⟩\langle p_T\rangle signifying the negative correlation of soft particles with increase in effective temperature, and positive above ⟨pT⟩\langle p_T\rangle.

The second rotated mode eGe_G represents all residual spectral fluctuations that do not have a thermal origin. It is shown in panel (f) of Figure 2. This mode has double sign-change, or two nodes. The first one occurs slightly below ⟨pT⟩\langle p_T\rangle and the second one occurs at high pTp_T beyond 2.5 GeV. The mode implies a deformation of the spectra where the soft particles are positively correlated with the changes in the initial state, intermediate particles are negatively correlated, and hard particles are again positively correlated. Physically, at fixed temperature, a fireball with larger eccentricity develops stronger pressure gradients along its minor axis, resulting in a modified radial-flow profile and a small change in [pT][p_T]. Such geometry-induced spectral redistribution among different pTp_T regions produces the characteristic two-nodal structure. This is analogous to the asymmetric stretching of a linear triatomic molecule, where the atoms on either side move in the same direction, but the middle atom moves in opposite direction, resulting in an incoherent mode of vibration. This is illustrated by the cartoon in panel (b) of Figure 2.

At fixed effective temperature, a proportionate (perfect correlation) change in SS and VV owing to impact parameter variation leads to fluctuations of ϵ22\epsilon_2^2. The effect is shown in panel (b) of Figure 1 presenting a scatter plot between [pT][p_T] and ϵ22\epsilon_2^2 at fixed ss implying fixed effective temperature. There exist a strong correlation (r=0.72r = 0.72) between the two in 30-40 % centrality. The corresponding variation of [pT][p_T] is smaller as compared to thermal fluctuations, but sufficiently enough to enforce a non-trivial change in pTp_T-spectra. The scenario is illustrated by the cartoon in panel (d) of Figure 2, where two spectra corresponding to two events cross at two different pTp_T. Therefore, two events can have same S/VS/V, hence same TT but different ϵ22\epsilon_2^2 due to different bb, hence different geometry. We label this second rotated mode eGe_G as the geometric mode of spectral fluctuation, as it originates from the changes in shape and size of the fireball.

Relevance to heavy-ion experiments. It is straightforward to reconstruct the observables v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) in the rotated bases as,

v0(pT)=∑iw~i0e~i(pT)v_0(p_T) = \sum_i \widetilde{w}_i^0 \widetilde{e}_i(p_T)
v02(pT)=∑iw~iv02e~i(pT)(7)v_{02}(p_T) = \sum_i \widetilde{w}_i^{v02} \widetilde{e}_i(p_T) \tag*{(7)}

where e~1≡eT\widetilde{e}_1 \equiv e_T, e~2≡eG\widetilde{e}_2 \equiv e_G and w~i\widetilde{w}_i's are the weights corresponding to the thermal and geometric normal modes. They are obtained by applying the same orthogonal rotation as in Eq. (6) on the weights corresponding to the original principal modes in Eq. (5).

In Figure 3, we present the results for v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) reconstructed using Eq. (7), along with their thermal and geometric counterparts. We also present the results for these observables directly computed from hydro results, to establish the fact that they can be fully reconstructed by using the first two leading modes. We show results for 30-40 % centrality, for which the geometric component has substantial effect on v02(pT)v_{02}(p_T) leading to its sign change at low pTp_T. The low-pTp_T sign-change may not be present in central collision due to the saturation of impact parameter fluctuations towards central collisions [10, 19], resulting in a smaller contribution from the geometric mode. A detailed study of the centrality dependence of the modes is left for a future study.

Figure 3. (a) Results for the thermal (red) and geometric (blue) contributions to v0(pT)v_0(p_T) in Pb+Pb collision at 5.02 TeV in 30-40% centrality class, as obtained in Eq. (7). The green curve represents the sum of the two. The black dashed line represents the result computed directly using the original definition as given in Eq. (2). (b) Thermal (red) and geometric (blue) components of v02(pT)v_{02}(p_T) along with their sum (green). The black dashed line represents the result computed directly using the definition in Eq. (2).

It can be seen from panel (a) of Figure 3 that v0(pT)v_0(p_T) is entirely driven by the thermal mode, with almost no contribution from the geometric mode. This is because the corresponding weight w~2v0≡w~Gv0\widetilde{w}_2^{v0} \equiv\widetilde{w}_G^{v0} constitutes just ≈7%\approx7\% of the total and the geometric mode eGe_G is itself suppressed by an order of magnitude c.f. Figure 2f. This is

also consistent with the results at fixed bb [22], where thermal fluctuations dominate. It follows that within a given centrality class, v0(pT)v_0(p_T) directly maps the thermal normal mode of the event-by-event spectra and their relation can be written as

eT(pT)≈αv0(pT).(8)e_T(p_T) \approx\alpha v_0(p_T) . \tag*{(8)}

where α\alpha is the normalization coefficient reflecting the magnitude of thermal mode. This fact is used for the estimation of θ\theta in Appendix C. From our analysis, α≈0.9\alpha\approx0.9 for the 30-40 % centrality bin. Therefore, the measured v0(pT)v_0(p_T) [29, 30], provides a robust experimental proxy of the underlying thermal mode of spectral fluctuations.

Panel (b) of Figure 3 shows v02(pT)v_{02}(p_T) along with its thermal and geometric components. It is clearly visible that the geometric component has a substantial contribution, forcing a double sign change in v02(pT)v_{02}(p_T), particularly at low pTp_T. Quantitatively, the weight corresponding to the geometric component carries 75% of the total weight, resulting in an enhanced contribution from geometric mode eGe_G in non-central collisions. This is an artifact of the strong correlation shown in panel (b) of Figure 1. Additionally in both panels of Figure 3, directly computed results for v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) are shown to establish the fact that only first two leading modes are enough for the full reconstruction of the observables. Unlike the thermal mode, the geometric mode cannot be directly realized from experimental measurement of v02(pT)v_{02}(p_T) due to substantial mixing of modes. However, by measuring v02(pT)v_{02}(p_T) as guided in [47], it can be indirectly extracted via the following relation:

eG(pT)=β1v02(pT)−β2v0(pT)(9)e_G(p_T) = \beta_1v_{02}(p_T) - \beta_2v_0(p_T) \tag*{(9)}

where the mixing coefficients β1≈2\beta_1 \approx2 and β2≈0.3\beta_2 \approx0.3, as obtained from our analysis for the 30-40% centrality class.

Since the above described method is an indirect way of extracting the thermal and geometric modes of spectral fluctuations subject to some model inputs, a potential direct way of accessing these modes would involve repeating the same PCA on experimental data covariance matrix of normalized spectrum, [pT][p_T] and v22v_2^2, following a similar procedure as outlined in reference [50]. For this direct measurement one needs to design four well-separated pseudorapidity windows for four group of sub-events to construct the required data covariance matrix [47]. More details of such a experimental procedure are provided in Appendix D.

Conclusions. In this letter we have established that event-by-event fluctuations of transverse momentum spectra in heavy-ion collisions decompose into two physically distinct normal modes: thermal and geometric, in direct analogy to the vibrational normal modes of a linear triatomic molecule. The thermal mode captures coherent spectral deformation driven by entropy density fluctuations at fixed eccentricity, while the geometric mode represents the incoherent residual deformation arising from eccentricity and size fluctuations at fixed temperature. Both of these effects are supported by direct empirical evidence from event-by-event correlations between final and initial state. Such decomposition can be achieved by performing principal component analysis on the augmented joint covariance matrix of the pTp_T-spectra, mean transverse momentum and elliptic flow squared, which establishes direct connection to the experimentally accessible observables v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T). The thermal and geometric modes are then obtained via an orthogonal rotation of the original principal modes, a method that is mathematically grounded in the rigorous connection between PC eigenmodes and initial state thermal and geometric response functions. The observable v0(pT)v_0(p_T) maps almost entirely the thermal mode and v02(pT)v_{02}(p_T) receives substantial contribution from geometric mode in non-central collisions, directly explaining its characteristic low-pTp_T sign change. This study further highlights the importance of measuring v02(pT)v_{02}(p_T) in experiment in immediate future. While the physical modes can be indirectly realized by measuring v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) up to some model inputs, a direct experimental extraction of these modes is also possible following a data-driven PCA method. Beyond the specific results presented here, the maximal coherence rotation criterion is conceptually general and can be extended to other collective probes, reframing the spectral fluctuation problem: rather than asking what v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T) measure independently, the natural question becomes how the thermal and geometric normal modes project onto experimental observables, opening a direct and systematic window into thermo-geometric structure of QGP.

Acknowledgements. The author thanks Jean-Yves Ollitrault for stimulating physics discussion and constructive feedback that significantly improved the manuscript, and Tribhuban Parida for engaging discussions and feedback on the draft. He also thanks Wojciech Broniowski for feedback and discussions on the manuscript, and especially thanks Piotr Bożek for discussions on fluctuations of pTp_T-spectra and experimental method for extraction of the PC modes. The author acknowledges support from the Polish National Science Center grant 2023/51/B/ST2/01625, and thanks IPhT Saclay for hospitality during a research visit where a significant part of this work was carried out.

Relation between final and initial state

In our analysis the event-by-event fluctuation of final state observables can be written in matrix form:

δX=(δN(pT1) ⋯ δN(pTi) ⋯ δpT δv22)(10)\delta X = \left(\delta N(p_{T1})\ \cdots\ \delta N(p_{Ti})\ \cdots\ \delta p_T\ \delta v_2^2\right) \tag*{(10)}

where ii runs from 1 to mm with mm being the number of pTp_T-bins and dimension of XX is m+2m+2. One can relate this to initial state fluctuation as,

(δN(pT1)⋮δN(pTi)⋮δpTδv22)=(α1(pT1)α2(pT1)⋮⋮α1(pTi)α2(pTi)⋮⋮β1β2γ1γ2)(δTδϵ2)(11)\begin{pmatrix} \delta N(p_{T1})\\ \vdots\\ \delta N(p_{Ti})\\ \vdots\\ \delta p_T\\ \delta v_2^2 \end{pmatrix} = \begin{pmatrix} \alpha_1(p_{T1}) & \alpha_2(p_{T1})\\ \vdots& \vdots\\ \alpha_1(p_{Ti}) & \alpha_2(p_{Ti})\\ \vdots& \vdots\\ \beta_1 & \beta_2\\ \gamma_1 & \gamma_2 \end{pmatrix} \begin{pmatrix} \delta T\\ \delta\epsilon_2 \tag*{(11)} \end{pmatrix}

which can be written as,

δX=R δS.(12)\delta X = R\,\delta S . \tag*{(12)}

where RR is the response matrix with its columns representing the thermal and geometric response modes, and δS\delta S represents the corresponding thermal and eccentricity fluctuations at initial state. Then for PCA one compute the covariance matrix,

Σ=1n−1∑iδXi δXiT=R ΣSRT(13)\Sigma= \frac{1}{n-1}\sum_i \delta X_i\,\delta X_i^T = R\,\Sigma_S R^T \tag*{(13)}

where the sum is over the number of events and resulting covariance matrix Σ\Sigma having the form as shown in Eq. 1. ΣS\Sigma_S is the source covariance matrix and can be written as, ΣS=1n−1∑iδSi δSiT\Sigma_S = \frac{1}{n-1}\sum_i \delta S_i\,\delta S_i^T. Then the eigen-decomposition in Eq. (3) can be related to the initial state as,

EΛET=R ΣSRT.(14)E\Lambda E^T = R\,\Sigma_S R^T . \tag*{(14)}

Since the matrix EE is orthonormal, the above equation can be written as,

Λ=(ETR) ΣS(RTE)=OTΣSO(15)\Lambda= (E^T R)\,\Sigma_S(R^T E) = O^T\Sigma_S O \tag*{(15)}

Optimal angle for orthogonal rotation

since Λ\Lambda is diagonal, the matrix RTE=OR^T E = O must be orthonormal which diagonalizes ΣS\Sigma_S. So the columns (the bases) of RR and EE are related by orthogonal transformation. In other words, since the columns of EE and RR spans the same subspace and these columns are orthogonal by construction, they must be related by some orthogonal transformation. Therefore, one writes

RT=OET(16)R^T = OE^T \tag*{(16)}
(α1α2)=(cos⁡θsin⁡θ−sin⁡θcos⁡θ)(e1e2)(17)\begin{pmatrix} \alpha_1\\ \alpha_2 \end{pmatrix} = \begin{pmatrix} \cos\theta& \sin\theta\\ -\sin\theta& \cos\theta \end{pmatrix} \begin{pmatrix} e_1\\ e_2 \tag*{(17)} \end{pmatrix}

which is exactly being done above where α1≡eT\alpha_1 \equiv e_T and α2≡eG\alpha_2 \equiv e_G.

The orthogonal rotation transforms the principal modes into physical thermal and geometric modes. For the thermal mode,

eT(pT)=cos⁡θ e1(pT)+sin⁡θ e2(pT)(18)e_T(p_T) = \cos\theta\ e_1(p_T) + \sin\theta\ e_2(p_T) \tag*{(18)}

where θ\theta is a single global rotation angle applied uniformly across all pTp_T bins. A global angle is required by construction: since eTe_T and eGe_G must be fixed linear combinations of e1e_1 and e2e_2 independent of pTp_T. A pTp_T-dependent rotation angle would yield pTp_T-dependent basis vectors, destroying the normal mode interpretation.

The global angle θ\theta is determined by the maximal coherence criterion which imposes the condition that eTe_T contains all thermal fluctuations within a single mode. Since pure thermal fluctuations produce coherent single-node spectral deformation pivoted at ⟨pT⟩\langle p_T\rangle, this is equivalent to maximizing eT(pTi)e_T(p_{T_i}) at each bin independently:

∂eT(pTi)∂θi=0(19)\frac{\partial e_T(p_{T_i})}{\partial\theta_i}=0 \tag*{(19)}

which returns the bin-optimal angle

θi=tan⁡−1(e2(pTi)e1(pTi)).(20)\theta_i = \tan^{-1}\left(\frac{e_2(p_{T_i})}{e_1(p_{T_i})}\right) . \tag*{(20)}

Since different pTp_T bins yield different θi\theta_i, we seek a single global θ\theta that best approximates all bin-specific angles simultaneously. A natural approach is weighted least square, minimizing sum of the squared distance ∑iωi(θ−θi)2\sum_i\omega_i(\theta-\theta_i)^2 over θ\theta. However, since the angles are periodic, standard least square treats θ=0\theta=0 and θ=2π\theta=2\pi as different values even though they represent the same direction, which can lead to incorrect results. Therefore, we minimize the circular distance via the cost function,

L(θ)=∑iωi(1−cos⁡(θ−θi))(21)\mathcal{L}(\theta) = \sum_i \omega_i\left(1-\cos(\theta-\theta_i)\right) \tag*{(21)}

where the weights ωi\omega_i are chosen as the sum of squared mode amplitudes in each bin

ωi=e1(pTi)2+e2(pTi)2.(22)\omega_i=e_1(p_{T_i})^2+e_2(p_{T_i})^2. \tag*{(22)}

Minimizing L(θ)\mathcal{L}(\theta) is equivalent to maximizing ωicos⁡(θ−θi)\omega_i\cos(\theta-\theta_i), which upon setting the derivative to zero yields the optimal global angle

θ=tan⁡−1(∑iωi e2(pTi)∑iωi e1(pTi)).(23)\theta=\tan^{-1}\left(\frac{\sum_i\sqrt{\omega_i}\,e_2(p_{T_i})}{\sum_i\sqrt{\omega_i}\,e_1(p_{T_i})}\right). \tag*{(23)}

Alternative determination of θ\theta

Another independent approach to determine θ\theta follows directly from the physical result established in the main text that v0(pT)v_0(p_T) is driven purely by the thermal mode and the geometric mode carries negligible weight in v0(pT)v_0(p_T).

From Eq. (7), the rotated weights are,

w~Tv0=cos⁡θ w1v0+sin⁡θ w2v0\widetilde{w}^{v_0}_T=\cos\theta\,w^{v_0}_1+\sin\theta\,w^{v_0}_2
w~Gv0=−sin⁡θ w1v0+cos⁡θ w2v0(24)\widetilde{w}^{v_0}_G=-\sin\theta\,w^{v_0}_1+\cos\theta\,w^{v_0}_2 \tag*{(24)}

By imposing the condition w~Gv0≈0\widetilde{w}^{v_0}_G\approx0 one directly obtains

θ=tan⁡−1(w2v0w1v0).(25)\theta=\tan^{-1}\left(\frac{w^{v_0}_2}{w^{v_0}_1}\right). \tag*{(25)}

This is a single algebraic equation requiring no optimization, with θ\theta determined entirely by the scalar PC weights w1v0w^{v_0}_1 and w2v0w^{v_0}_2 from Eq. (5).

The two methods, maximal coherence and zero geometric weight in v0v_0, yield angles that agree to within 3% of the total rotation range ([0,π])([0,\pi]), providing a strong self-consistency check of the framework.

Experimental method for extractions of the modes

Here we describe a possible way in the experiment for the direct extraction of the physical modes described in the text. To achieve this, an experiment needs to have four groups of sub-events recorded by four detectors sufficiently separated in pseudorapidity η\eta as shown in Figure 4. This is similar to the method described in Appendix A of the reference [47]. Let us label these four detectors from backward to forward rapidity as A, B, C, D. Next, one needs to measure the core observables N(pT)N(p_T), [pT][p_T], σpT\sigma_{p_T}, v22v_2^2 to be able to construct the blocks of the data covariance matrix similar to Σ\Sigma.

Figure 4. Schematics of the four pseudorapidity windows well-separated by δη\delta\eta gaps to record events for measurement of observables of interest.

For event-by-event v22v_2^2, one needs to measure the Q-vectors [60] in the detectors A and D,

Q2,A=∑i=1NAexp⁡(2iϕi),(26)Q_{2,A}=\sum_{i=1}^{N_A}\exp(2i\phi_i), \tag*{(26)}
Q2,D=∑i=1NDexp⁡(2iϕi)(27)Q_{2,D}=\sum_{i=1}^{N_D}\exp(2i\phi_i) \tag*{(27)}

where NAN_A and NDN_D are the number of particles in two detectors. Then for the normalized spectrum one measures the fraction of particles in a given pTp_T bin in one of the other detectors, say B,

N(pT)B≡fB(pT)=NB(pT)NB.(28)N(p_T)_B\equiv f_B(p_T)=\frac{N_B(p_T)}{N_B}. \tag*{(28)}

Similarly, the detector C can be used to measure fC(pT)f_C(p_T) and also event-by-event mean transverse momentum per particle [pT][p_T],

[pT]C=1NC∑j=1NCpT,j.(29)[p_T]_C=\frac{1}{N_C}\sum_{j=1}^{N_C}p_{T,j}. \tag*{(29)}

Since we also need σpT\sigma_{p_T} for normalization of the covariance blocks, the best approach would be to measure mean transverse momentum per particle in another detector (say, [pT]B[p_T]_B), which would suppress non-flow contamination [22],

σpT2=⟨[pT]B[pT]C⟩−⟨[pT]B⟩⟨[pT]C⟩,(30)\sigma_{p_T}^2=\langle[p_T]_B[p_T]_C\rangle-\langle[p_T]_B\rangle\langle[p_T]_C\rangle, \tag*{(30)}

where ⟨…⟩\langle\ldots\rangle denotes the average over all events.

Then one constructs each block of the normalized data covariance matrix as given in Eq. (2) as,

CN,N=⟨fB(pT)fC(pT)⟩c⟨fB(pT)⟩⟨fC(pT)⟩,(31)C_{N,N}=\frac{\langle f_B(p_T)f_C(p_T)\rangle_c}{\langle f_B(p_T)\rangle\langle f_C(p_T)\rangle}, \tag*{(31)}
CN,[pT]=⟨fB(pT)[pT]C⟩c⟨fB(pT)⟩σpT,(32)C_{N,[p_T]}=\frac{\langle f_B(p_T)[p_T]_C\rangle_c}{\langle f_B(p_T)\rangle\sigma_{p_T}}, \tag*{(32)}
CN,v22=⟨fB(pT)Q2,AQ2,D∗⟩c⟨fB(pT)⟩⟨Q2,AQ2,D∗⟩c(33)C_{N,v_2^2}=\frac{\langle f_B(p_T)Q_{2,A}Q^*_{2,D}\rangle_c}{\langle f_B(p_T)\rangle\langle Q_{2,A}Q^*_{2,D}\rangle_c} \tag*{(33)}

where the numerators are two- or three-particle cumulants with the subscript cc representing the corresponding connected parts of the correlations, after subtracting the uncorrelated or disconnected parts [47]. It should be noted that measuring CN,[pT]C_{N,[p_T]} and CN,v22C_{N,v_2^2} is equivalent to measure v0(pT)v_0(p_T) and v02(pT)v_{02}(p_T). Therefore, only additional task would be to measure CN,NC_{N,N}. Once each element or block of the normalized data-covariance matrix is obtained one can apply directly the PCA on that matrix similarly as has been done by CMS collaboration in [50]. This should result in two leading eigenvectors explaining most of the fluctuations of spectra. Then, to identify the physical modes, one can use the fact established in this article that v0(pT)v_0(p_T) is purely driven by thermal mode, to find the rotation angle θ\theta following the method described in Appendix § 1.5.

The biggest challenge to perform the above analysis in experiment would be to design four sub-events in four well-separated η\eta-windows. However, in case of overlapping pseudorapidity windows, one can remove the self-correlations systematically following the proceedure described at the end of reference [47] and detailed in [61].

References

  1. [1]P. Huovinen and P. V. Ruuskanen, Hydrodynamic Models for Heavy Ion Collisions, Ann. Rev. Nucl. Part. Sci. 56, 163 (2006), arXiv:nucl-th/0605008.DOI
  2. [2]J.-Y. Ollitrault, Relativistic hydrodynamics for heavy-ion collisions, Eur. J. Phys. 29, 275 (2008), arXiv:0708.2433 [nucl-th].DOI
  3. [3]B. Muller, J. Schukraft, and B. Wyslouch, First Results from Pb+Pb collisions at the LHC, Ann. Rev. Nucl. Part. Sci. 62, 361 (2012), arXiv:1202.3233 [hep-ex].DOI
  4. [4]U. Heinz and R. Snellings, Collective flow and viscosity in relativistic heavy-ion collisions, Ann. Rev. Nucl. Part. Sci. 63, 123 (2013), arXiv:1301.2826 [nucl-th].DOI
  5. [5]W. Busza, K. Rajagopal, and W. van der Schee, Heavy Ion Collisions: The Big Picture, and the Big Questions, Ann. Rev. Nucl. Part. Sci. 68, 339 (2018), arXiv:1802.04801 [hep-ph].
  6. [6]W. Broniowski, M. Chojnacki, and L. Obara, Size fluctuations of the initial source and the event-by-event transverse momentum fluctuations in relativistic heavy-ion collisions, Phys. Rev. C 80, 051902 (2009), arXiv:0907.3216 [nucl-th].DOI
  7. [7]P. Bożek and W. Broniowski, Transverse-momentum fluctuations in relativistic heavy-ion collisions from event-by-event viscous hydrodynamics, Phys. Rev. C 85, 044910 (2012), arXiv:1203.1810 [nucl-th].DOI
  8. [8]P. Bożek and W. Broniowski, Transverse momentum fluctuations in ultrarelativistic Pb + Pb and p + Pb collisions with “wounded” quarks, Phys. Rev. C 96, 014904 (2017), arXiv:1701.09105 [nucl-th].DOI
  9. [9]F. G. Gardim, G. Giacalone, M. Luzum, and J.-Y. Ollitrault, Thermodynamics of hot strong-interaction matter from ultrarelativistic nuclear collisions, Nature Phys. 16, 615 (2020), arXiv:1908.09728 [nucl-th].DOI
  10. [10]R. Samanta, S. Bhatta, J. Jia, M. Luzum, and J.-Y. Ollitrault, Thermalization at the femtoscale seen in high-energy Pb+Pb collisions, Phys. Rev. C 109, L051902 (2024), arXiv:2303.15323 [nucl-th].DOI
  11. [11]J.-Y. Ollitrault, Anisotropy as a signature of transverse collective flow, Phys. Rev. D 46, 229 (1992).pubmed.ncbi.nlm.nih.gov/10014754
  12. [12]S. Voloshin and Y. Zhang, Flow study in relativistic nuclear collisions by Fourier expansion of Azimuthal particle distributions, Z. Phys. C 70, 665 (1996), arXiv:hep-ph/9407282.DOI
  13. [13]H. Sorge, Highly sensitive centrality dependence of elliptic flow: A novel signature of the phase transition in QCD, Phys. Rev. Lett. 82, 2048 (1999), arXiv:nucl-th/9812057.DOI
  14. [14]J.-Y. Ollitrault, Measures of azimuthal anisotropy in high-energy collisions, Eur. Phys. J. A 59, 236 (2023), arXiv:2308.11674 [nucl-ex].DOI
  15. [15]J. Adams et al. (STAR), Azimuthal anisotropy in Au+Au collisions at s(NN)**(1/2) = 200-GeV, Phys. Rev. C 72, 014904 (2005), arXiv:nucl-ex/0409033.
  16. [16]K. Aamodt et al. (ALICE), Elliptic flow of charged particles in Pb-Pb collisions at 2.76 TeV, Phys. Rev. Lett. 105, 252302 (2010), arXiv:1011.3914 [nucl-ex].
  17. [17]G. Aad et al. (ATLAS), Measurement of the azimuthal anisotropy for charged particle production in √sNN = 2.76 TeV lead-lead collisions with the ATLAS detector, Phys. Rev. C 86, 014907 (2012), arXiv:1203.3087 [hep-ex].
  18. [18]F. G. Gardim, G. Giacalone, M. Luzum, and J.-Y. Ollitrault, Effects of initial state fluctuations on the mean transverse momentum, Nucl. Phys. A 1005, 121999 (2021), arXiv:2002.07008 [nucl-th].DOI
  19. [19]R. Samanta, J. P. Picchetti, M. Luzum, and J.-Y. Ollitrault, Non-Gaussian transverse momentum fluctuations from impact parameter fluctuations, Phys. Rev. C 108, 024908 (2023), arXiv:2306.09294 [nucl-th].DOI
  20. [20]M. Alghatini, T. Parida, and J.-Y. Ollitrault, Extracting the speed of sound of QCD from transverse momentum fluctuations, (2026), arXiv:2603.09647 [hep-ph].
  21. [21]B. Schenke, C. Shen, and D. Teaney, Transverse momentum fluctuations and their correlation with elliptic flow in nuclear collision, Phys. Rev. C 102, 034905 (2020), arXiv:2004.00690 [nucl-th].DOI
  22. [22]T. Parida, R. Samanta, and J.-Y. Ollitrault, Probing collectivity in heavy-ion collisions with fluctuations of the pT spectrum, Phys. Lett. B 857, 138985 (2024), arXiv:2407.17313 [nucl-th].DOI
  23. [23]S. Bhatta, A. Dimri, and J. Jia, Disentangling the global multiplicity and spectral shape fluctuations in radial flow, (2025), arXiv:2504.20008 [nucl-th].
  24. [24]S. Saha, R. Singh, and B. Mohanty, pT-differential radial flow in a blast-wave model, Phys. Rev. C 112, 024902 (2025), arXiv:2505.19697 [nucl-ex].
  25. [25]J. Jia, Sources of Radial-Flow Fluctuations in the Quark-Gluon Plasma, Phys. Rev. Lett. 136, 112301 (2026), arXiv:2507.14399 [nucl-th].DOI
  26. [26]L. Du, Characterizing radial flow fluctuations in relativistic heavy-ion collisions at top RHIC and LHC energies, Phys. Rev. C 113, 014901 (2026), arXiv:2508.07184 [nucl-ex].DOI
  27. [27]R. Agarwala, D. Basak, and K. Dey, Observation of partonic collectivity via pT-differential radial flow fluctuations in Au+Au collisions at √sNN = 200 GeV, (2025), arXiv:2512.15026 [nucl-ex].arxiv.org/abs/2512.15026
  28. [28]T. Parida, Rapidity dependence of mean transverse momentum fluctuation and decorrelation in baryon-dense medium, (2026), arXiv:2602.16369 [nucl-th].DOI
  29. [29]G. Aad et al. (ATLAS), Evidence for the Collective Nature of Radial Flow in Pb+Pb Collisions with the ATLAS Detector, Phys. Rev. Lett. 136, 032301 (2026), arXiv:2503.24125 [nucl-ex].
  30. [30]S. Acharya et al. (ALICE), Long-range transverse momentum correlations and radial flow in Pb–Pb collisions at the LHC, Phys. Rev. Lett. 136, 032302 (2026), arXiv:2504.04796 [nucl-ex].
  31. [31]R. S. Bhalerao and J.-Y. Ollitrault, Eccentricity fluctuations and elliptic flow at RHIC, Phys. Lett. B 641, 260 (2006), arXiv:nucl-th/0607009.
  32. [32]W. Broniowski, P. Bozek, and M. Rybczynski, Fluctuating initial conditions in heavy-ion collisions from the Glauber approach, Phys. Rev. C 76, 054905 (2007), arXiv:0706.4266 [nucl-th].DOI
  33. [33]B. Alver and G. Roland, Collision geometry fluctuations and triangular flow in heavy-ion collisions, Phys. Rev. C 81, 054905 (2010), [Erratum: Phys.Rev.C 82, 039903 (2010)], arXiv:1003.0194 [nucl-th].arxiv.org/abs/1003.0194
  34. [34]H. Holopainen, H. Niemi, and K. J. Eskola, Event-by-event hydrodynamics and elliptic flow from fluctuating initial state, Phys. Rev. C 83, 034901 (2011), arXiv:1007.0368 [hep-ph].DOI
  35. [35]G.-Y. Qin, H. Petersen, S. A. Bass, and B. Muller, Translation of collision geometry fluctuations into momentum anisotropies in relativistic heavy-ion collisions, Phys. Rev. C 82, 064903 (2010), arXiv:1009.1847 [nucl-th].DOI
  36. [36]R. S. Bhalerao, M. Luzum, and J.-Y. Ollitrault, Determining initial-state fluctuations from flow measurements in heavy-ion collisions, Phys. Rev. C 84, 034910 (2011), arXiv:1104.4740 [nucl-th].DOI
  37. [37]M. Luzum and H. Petersen, Initial State Fluctuations and Final State Correlations in Relativistic Heavy-Ion Collisions, J. Phys. G 41, 063102 (2014), arXiv:1312.5503 [nucl-th].DOI
  38. [38]P. Bozek, Transverse-momentum–flow correlations in relativistic heavy-ion collisions, Phys. Rev. C 93, 044908 (2016), arXiv:1601.04513 [nucl-th].DOI
  39. [39]P. Bozek and H. Mehrabpour, Correlation coefficient between harmonic flow and transverse momentum in heavy-ion collisions, Phys. Rev. C 101, 064902 (2020), arXiv:2002.08832 [nucl-th].DOI
  40. [40]G. Giacalone, B. Schenke, and C. Shen, Observable signatures of initial state momentum anisotropies in nuclear collisions, Phys. Rev. Lett. 125, 192301 (2020), arXiv:2006.15721 [nucl-th].DOI
  41. [41]G. Giacalone, F. G. Gardim, J. Noronha-Hostler, and J.-Y. Ollitrault, Correlation between mean transverse momentum and anisotropic flow in heavy-ion collisions, Phys. Rev. C 103, 024909 (2021), arXiv:2004.01765 [nucl-th].DOI
  42. [42]P. Bozek and R. Samanta, Higher order cumulants of transverse momentum and harmonic flow in relativistic heavy ion collisions, Phys. Rev. C 104, 014905 (2021), arXiv:2103.15338 [nucl-th].DOI
  43. [43]R. Samanta and P. Bozek, Momentum-dependent measures of correlations between mean transverse momentum and harmonic flow in heavy-ion collisions, Phys. Rev. C 109, 064910 (2024), arXiv:2308.11565 [nucl-th].arxiv.org/abs/2308.11565
  44. [44]S. Acharya et al. (ALICE), Characterizing the initial conditions of heavy-ion collisions at the LHC with mean transverse momentum and anisotropic flow correlations, Phys. Lett. B 834, 137393 (2022), arXiv:2111.06106 [nucl-ex].
  45. [45]G. Aad et al. (ATLAS), Correlations between flow and transverse momentum in Xe+Xe and Pb+Pb collisions at the LHC with the ATLAS detector: A probe of the heavy-ion initial state and nuclear deformation, Phys. Rev. C 107, 054910 (2023), arXiv:2205.00039 [nucl-ex].
  46. [46]M. I. Abdulhamid et al. (STAR), Imaging shapes of atomic nuclei in high-energy nuclear collisions, Nature 635, 67 (2024), arXiv:2401.06625 [nucl-ex].
  47. [47]T. Parida, R. Samanta, and J.-Y. Ollitrault, Correlation between particle spectra and elliptic flow, Phys. Lett. B 868, 139729 (2025), arXiv:2506.18690 [nucl-th].DOI
  48. [48]R. S. Bhalerao, J.-Y. Ollitrault, S. Pal, and D. Teaney, Principal component analysis of event-by-event fluctuations, Phys. Rev. Lett. 114, 152301 (2015), arXiv:1410.7739 [nucl-th].pubmed.ncbi.nlm.nih.gov/25933310
  49. [49]A. Mazeliauskas and D. Teaney, Fluctuations of harmonic and radial flow in heavy ion collisions with principal components, Phys. Rev. C 93, 024913 (2016), arXiv:1509.07492 [nucl-th].DOI
  50. [50]A. M. Sirunyan et al. (CMS), Principal-component analysis of two-particle azimuthal correlations in PbPb and pPb collisions at CMS, Phys. Rev. C 96, 064902 (2017), arXiv:1708.07113 [nucl-ex].
  51. [51]M. B. Richman, Rotation of principal components, Journal of Climatology 6, 293.
  52. [52]I. T. Jolliffe, Rotation of ill-defined principal components, Journal of the Royal Statistical Society. Series C (Applied Statistics) 38, 139 (1989).DOI
  53. [53]A. Mazeliauskas and D. Teaney, Subleading harmonic flows in hydrodynamic simulations of heavy ion collisions, Phys. Rev. C 91, 044902 (2015), arXiv:1501.03138 [nucl-th].DOI
  54. [54]P. Bożek, Angle and magnitude decorrelation in the factorization breaking of collective flow, Phys. Rev. C 98, 064906 (2018), arXiv:1808.04248 [nucl-th].DOI
  55. [55]Z. Liu, W. Zhao, and H. Song, Principal Component Analysis of collective flow in Relativistic Heavy-Ion Collisions, Eur. Phys. J. C 79, 870 (2019), arXiv:1903.09833 [nucl-th].DOI
  56. [56]Z. Liu, A. Behera, H. Song, and J. Jia, Robustness of principal component analysis of harmonic flow in heavy ion collisions, Phys. Rev. C 102, 024911 (2020), arXiv:2002.06061 [nucl-ex].DOI
  57. [57]J. S. Moreland, J. E. Bernhard, and S. A. Bass, Alternative ansatz to wounded nucleon and binary collision scaling in high-energy nuclear collisions, Phys. Rev. C 92, 011901 (2015), arXiv:1412.4708 [nucl-th].
  58. [58]B. Schenke, S. Jeon, and C. Gale, (3+1)D hydrodynamic simulation of relativistic heavy-ion collisions, Phys. Rev. C 82, 014903 (2010), arXiv:1004.1408 [hep-ph].DOI
  59. [59]P. Bozek and R. Samanta, Factorization breaking for higher moments of harmonic flow, Phys. Rev. C 105, 034904 (2022), arXiv:2109.07781 [nucl-th].DOI
  60. [60]A. Bilandzic, R. Snellings, and S. Voloshin, Flow analysis with cumulants: Direct calculations, Phys. Rev. C 83, 044913 (2011), arXiv:1010.0233 [nucl-ex].DOI
  61. [61]P. Di Francesco, M. Guilbaud, M. Luzum, and J.-Y. Ollitrault, Systematic procedure for analyzing cumulants at any order, Phys. Rev. C 95, 044911 (2017), arXiv:1612.05634 [nucl-th].DOI

Paper details

vlnc:W_vtnhq3fw
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents