betaFeedback

WorksPhysics and Astronomy

Lead-free antiperovskite derivatives Ba3_3MA3_3 (M = P, As, Sb, Bi; A = Cl, Br, I): Next-gen materials for optoelectronics

Abstract

Antiperovskite derivatives have recently emerged as promising lead-free alternatives to halide perovskites for optoelectronic applications. Here, using a comprehensive first-principles calculations including density functional perturbation theory and many-body perturbation theory (involving GW and Bethe-Salpeter equation (BSE)), we investigate the stability, excitonic, polaronic, and optoelectronic properties of cubic Ba3_3MA3_3 (M = P, As, Sb, Bi; A = Cl, Br, I). These compounds are found to be dynamically and thermodynamically stable direct-gap semiconductors with G0_0W0_0@PBE+SOC band gaps spanning 1.23-2.17 eV. BSE calculations reveal moderate exciton binding energies (0.254-0.352 eV) and intermediate-radius excitons, while Fröhlich polaron analysis indicates intermediate carrier-phonon coupling and mobilities up to ∼\sim 75 cm2^{2}V−1^{-1}s−1^{-1}. The resulting spectroscopic limited maximum efficiencies reach ∼\sim 19-32%, surpassing several lead-based perovskites. Our results establish Ba-based antiperovskite derivatives as a robust, eco-friendly platform for next-generation optoelectronic devices.

Introduction: Lead halide perovskites have attracted intense research interest owing to their exceptional optoelectronic properties, with power conversion efficiencies (PCEs) increasing from 3.8% to over 27% within a decade [1, 2, 3, 4]. However, the toxicity due to lead and limited long-term stability impede their commercial deployment [5, 6], motivating the search for safer and more stable alternatives. In this context, antiperovskite semiconductors (X3_3BA), which are structurally analogous to conventional perovskites (ABX3_3) but feature reversed cation–anion roles, have emerged as promising candidates for optoelectronic applications [7, 8]. Ion inversion in antiperovskites produces distinct band-edge characteristics compared to halide perovskites, enabling a broader compositional design space.

Further development has led to antiperovskite derivatives (X3_3BA3_3), obtained through structural modifications such as anion ordering and splitting. These retain the three-dimensional octahedral framework while offering enhanced thermodynamic stability and tunable bandgaps [9, 10, 11]. Notably, several members of this family exhibit optoelectronic properties and theoretical solar conversion efficiencies comparable to, or exceeding, those of lead-based perovskites, highlighting their potential as lead-free, high-performance semiconductors [9, 10, 11, 12, 13]. In X3_3BA3_3 compounds, alkaline-earth metals (Mg, Ca, Sr, Ba) occupy the X-site, pnictogens (N, P, As, Sb, Bi) the B-site, and halides (F, Cl, Br, I) the A-site. The pnictogen–halide combination is particularly favorable for achieving direct bandgaps, strong optical absorption, and structural stability.

Experimentally, Mg3_3NF3_3 has been synthesized at high temperatures (1050 °C) and adopts a cubic Pm3ˉ\bar{3}m structure [14]. While numerous theoretical studies have investigated inorganic antiperovskite derivatives [9, 10, 11, 12, 15, 16], Ba-based systems have received special attention due to their larger ionic radii, lattice flexibility, and direct bandgaps suitable for photovoltaic applications [9, 11, 17]. Despite their promising photovoltaic performance, the excitonic and polaronic properties of these materials remain largely unexplored, even though they critically influence charge separation, carrier mobility, recombination, and realistic device efficiency.

In this work, we present the first comprehensive study of excitonic and polaronic physics in antiperovskite derivatives Ba3_3MA3_3 (M = P, As, Sb, Bi; A = Cl, Br, I). Many-body effects and carrier–phonon interactions are explicitly examined together with electronic and optical properties and theoretical efficiency. Our computational approach combines density functional theory (DFT) [18, 19], density functional perturbation theory (DFPT) [20], and many-body perturbation theory (MBPT) [21, 22] to evaluate electronic structure, dielectric screening, exciton binding energies, carrier–phonon coupling, polaron mobilities, and spectroscopic limited maximum efficiency (SLME). All calculations are performed using the Vienna Ab initio Simulation Package (VASP) [23, 24]. Additional computational details and supporting results are provided in Sec. I of the Supplemental Material (SM) [25]; see also Refs. [26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36].

Results and Discussions: Structurally, antiperovskites (X3_3MA3_3) are derived from conventional perovskites (AMX3_3) via cation–anion inversion while preserving symmetry. Their derivatives further modify this framework by replacing one trivalent anion (A3−^{3-}) with three monovalent anions (3×A−3 \times\mathrm{A}^{-}) to maintain charge neutrality (Figure 1), which can be viewed as successive cation–anion inversion and A-site splitting [37]. Figure 1(b) shows the resulting Ba3MA3\mathrm{Ba}_{3}\mathrm{MA}_{3} antiperovskite derivatives (M3−=P\mathrm{M}^{3-} = \mathrm{P}, As, Sb, Bi; A−=Cl\mathrm{A}^{-} = \mathrm{Cl}, Br, I). We focus on the cubic Pm3ˉm\mathrm{Pm}\bar{3}\mathrm{m} (No. 221) phase, which combines features of halide perovskites and antiperovskites and is suitable for optoelectronic applications. In this structure, each Ba2+\mathrm{Ba}^{2+} is octahedrally coordinated by two M3−\mathrm{M}^{3-} and four A−\mathrm{A}^{-} anions, yielding equivalent Ba–M and Ba–A bond lengths (Table S1). The PBE-calculated lattice parameters (Table I) agree with previous studies [12, 15, 37]. Lattice constants increase from Cl →\to Br →\to I for fixed M and from P →\to As →\to Sb →\to Bi for fixed A, consistent with bond-length trends. Structural stability is confirmed by phonon dispersion [20] (Fig. S1), as well as decomposition enthalpies and elastic constants, indicating thermodynamic and mechanical stability (see Secs. IV and V of the SM [25]).

Image not extracted

Figure 1. Design strategy for antiperovskite derivatives obtained by splitting the A-site position at (0,0,0)(0,0,0) into three distinct positions (0.5,0,0)(0.5,0,0), (0,0.5,0)(0,0.5,0), and (0,0,0.5)(0,0,0.5).

After establishing structural stability, we examine the electronic properties of Ba3MA3\mathrm{Ba}_{3}\mathrm{MA}_{3} using density of states and band-structure calculations. Atom- and symmetry-projected DOS near the band edges are shown in Fig. S2 of the SM [25]. Band gaps obtained with the PBE functional [38] are underestimated due to self-interaction errors (Table S4). More accurate results are achieved using the HSE06 hybrid functional [39] and the G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE approach [40, 41]. Spin–orbit coupling (SOC) is included in PBE and HSE06 calculations and is particularly important for Sb- and Bi-based compounds. Fully self-consistent G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE+SOC calculations are computationally very demanding for the considered systems (relatively large unit cell size) and convergence settings. Therefore, SOC effects are incorporated perturbatively by adding the SOC-corrected band-gaps obtained from HSE06 calculations to the scalar-relativistic G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE band gaps when plotting the band structures. This approach is justified since the band-gap difference (ΔEg\Delta E_{\mathrm{g}}) with and without SOC remains nearly identical across functionals for all compounds (Table S4, SM [25]). Figures S5 and Fig. 2(a–d) show that all systems are direct-bandgap semiconductors with both VBM and CBM at the Γ\Gamma point. The HSE06 band gaps of Ba3MBr3\mathrm{Ba}_{3}\mathrm{MBr}_{3} (M = P, As, Sb) agree with earlier reports [12]. The resulting G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE+SOC band gaps (EgE_{\mathrm{g}}) range from 1.23 to 2.17 eV, comparable to lead halide perovskites (1.50–1.85 eV) [42, 43], highlighting their potential for photovoltaic and optoelectronic applications. The calculated electron and hole effective masses (me∗m_{\mathrm{e}}^{*}, mh∗m_{\mathrm{h}}^{*}; Table I) further indicate predominantly p-type transport behavior (see Sec. IX of the SM [25]).

Although these compounds exhibit favorable band gaps and low carrier effective masses, these features alone do not establish their suitability as photovoltaic absorbers. A detailed analysis of their optical properties, particularly the frequency-dependent dielectric function ε(ω)\varepsilon(\omega), is therefore required. To improve accuracy, we employ MBPT-based BSE@G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE calculations that explicitly include electron–hole interactions [44, 45]. As in the band-structure analysis, SOC-corrected EgE_{\mathrm{g}} values obtained at the HSE06 level are incorporated into the BSE@G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE optical spectra. The dielectric function comprises a real part, Re⁡(ε)\operatorname{Re}(\varepsilon), describing polarization and dielectric screening, and an imaginary part, Im⁡(ε)\operatorname{Im}(\varepsilon), associated with optical absorption. The calculated dielectric spectra of Ba3MA3\mathrm{Ba}_{3}\mathrm{MA}_{3} (A = Cl, Br) and Ba3MI3\mathrm{Ba}_{3}\mathrm{MI}_{3} are shown in Figs. S6 and Figure 2(e–Figure 2h), respectively. The electronic dielectric constant (ε∞\varepsilon_{\infty}) increases from Cl- to Br- to I-based systems, indicating stronger screening and reduced carrier recombination in iodides. Correspondingly, the absorption onset and first peak (E0E_{0}) redshift with decreasing quasiparticle band gaps (Table I). The resulting optical band gaps (0.97–1.81 eV) lie within the optimal range for efficient solar energy conversion.

Image not extracted

Figure 2. (a-d) Electronic band structures and transition probabilities calculated using G0W0G_0W_0@PBE+SOC and (e-h) real and imaginary parts of the dielectric function calculated using BSE@G0W0G_0W_0@PBE+SOC for Ba3_3MI3_3 (M = P, As, Sb, Bi).

In addition to optical properties, key excitonic parameters—including exciton binding energy (EBE_{\mathrm{B}}), temperature (TexcT_{\mathrm{exc}}), radius (rexcr_{\mathrm{exc}}), and lifetime (τexc\tau_{\mathrm{exc}})—are evaluated, as excitons formed upon photoexcitation strongly affect charge separation and recombination. A lower EBE_{\mathrm{B}} promotes efficient carrier dissociation and improved device performance. From first-principles calculations, EBE_{\mathrm{B}} is obtained as the difference between the direct quasiparticle band gap (G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE+SOC) and the optical band gap (BSE@G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE+SOC) [46, 47]. Table II summarizes the calculated EBE_{\mathrm{B}} values, which decrease from Cl- to Br- to I-based compounds and lie in the range 0.254–0.352 eV. These values are significantly larger than those of conventional 3D halide perovskites [48], indicating pronounced excitonic effects that are beneficial for light-emitting devices, lasers, and certain photodetectors; however, their advantage in photovoltaics depends on efficient exciton dissociation.

To further analyze excitonic behavior, the Wannier–Mott model [49] is employed. The effective dielectric constant (εeff\varepsilon_{\mathrm{eff}}) lies between the electronic (ε∞\varepsilon_{\infty}) and static (εs=ε∞+εi\varepsilon_{\mathrm{s}} = \varepsilon_{\infty} + \varepsilon_{\mathrm{i}}) values, where the ionic contribution εi\varepsilon_{\mathrm{i}} is obtained from DFPT calculations (see Sec. XII of the SM [25]). For all compounds, EB≫ℏωLOE_{\mathrm{B}} \gg\hbar\omega_{\mathrm{LO}}, with ωLO\omega_{\mathrm{LO}} the longitudinal optical phonon frequency (Tables II and Table III), indicating dominant electronic screening and εeff≈ε∞\varepsilon_{\mathrm{eff}} \approx\varepsilon_{\infty} [50, 51]. Using EBE_{\mathrm{B}}, ε∞\varepsilon_{\infty}, and μ∗\mu^{*}, additional excitonic parameters, including TexcT_{\mathrm{exc}}, rexcr_{\mathrm{exc}}, and the zero-separation wave-function probability ∣ϕn(0)∣2\lvert\phi_{n}(0)\rvert^{2}, are determined (Table II). The calculated exciton radii (0.90–1.95 nm) exceed the lattice constants (∼6\sim6–7 Å), indicating intermediate-radius excitons extending over multiple unit cells and lying between Frenkel and Wannier–Mott limits [52, 53].

SystemsAωLO\omega_{\mathrm{LO}} (THz)α\alphaEpE_{\mathrm{p}} (meV)mp/m∗m_{\mathrm{p}}/m^{*}μp\mu_{\mathrm{p}} (cm2^{2}V−1^{-1}s−1^{-1})SLME (%)
Ba3_3PA3_3Cl3.873.542.6059.2043.001.901.609.5828.6219.10
Br3.143.502.9347.4739.471.891.7013.1724.5721.40
I2.333.783.9538.1739.971.992.0518.5915.8628.36
Ba3_3AsA3_3Cl3.143.802.8751.7238.641.991.699.0724.4421.84
Br2.733.422.8240.2932.991.861.6713.7326.9224.58
I2.253.002.8428.9827.391.721.6825.7130.8030.52
Ba3_3SbA3_3Cl2.513.992.8843.5131.002.061.6910.6533.2622.94
Br2.463.802.7240.5228.641.991.6411.3336.1125.52
I2.283.853.0438.0729.782.011.7414.2832.4929.97
Ba3_3BiA3_3Cl2.443.162.2133.1722.941.781.4920.5268.0629.73
Br2.363.132.1631.7721.671.771.4821.0073.1031.60
I2.144.012.4337.2922.182.071.5513.6275.0932.41

Table III. Calculated polaron parameters and spectroscopic limited maximum efficiency (SLME) of Ba3_3MA3_3 (M = P, As, Sb, Bi; A = Cl, Br, I).

SystemsALattice parameters (a=b=ca=b=c)Bandgap (eV)me∗m_e^* (m0m_0)mh∗m_h^* (m0m_0)μ∗\mu^* (m0m_0)
This workPrevious reportsHSE06+SOCG0W0G_0W_0@PBE+SOC
Ba3_3PA3_3Cl6.446.42 [15]1.642.170.7050.3800.247
Br6.626.61 [12]1.602.050.5940.4170.245
I6.871.381.720.4530.4960.237
Ba3_3AsA3_3Cl6.511.602.040.7550.4320.275
Br6.666.67 [12]1.521.910.6450.4360.260
I6.911.291.570.4700.4230.223
Ba3_3SbA3_3Cl6.706.68 [15]1.551.980.6910.3600.237
Br6.856.83 [12]1.481.860.7110.3630.240
I7.111.301.600.5820.3620.223
Ba3_3BiA3_3Cl6.741.131.640.5200.2550.171
Br6.876.88 [37]1.051.490.5260.2490.169
I7.117.11 [37]0.871.230.5970.2200.161

Table 1. Calculated lattice parameters (in Å), electronic band gaps (in eV) from different methods, effective electron (me∗m_e^*) and hole (mh∗m_h^*) masses, and reduced masses (μ∗\mu^*) (in units of m0m_0) for Ba3_3MA3_3 (M = P, As, Sb, Bi; A = Cl, Br, I).

Moreover, the inverse of ∣ϕn(0)∣2|\phi_n(0)|^2 provides a qualitative estimate of the exciton lifetime (τexc\tau_{\mathrm{exc}}), reflecting the recombination timescale (see Sec. XIII of the SM [25]). Notably, I-based compounds exhibit longer τexc\tau_{\mathrm{exc}} than their Br- and Cl-based counterparts, implying reduced recombination rates and enhanced quantum yield and conversion efficiency.

In a recent study, Filip et al. [54] introduced phonon screening into the exciton binding energy EBE_B by considering four key parameters: the reduced effective mass (μ∗\mu^*), the electronic (ε∞\varepsilon_\infty) and static (εs\varepsilon_s) dielectric constants, and the longitudinal optical phonon frequency (ωLO\omega_{\mathrm{LO}}). To obtain a representative ωLO\omega_{\mathrm{LO}} from multiple phonon branches, we adopted the method of Hellwarth and Biaggio [55]. Assuming isotropic and parabolic band dispersion, the phonon-screening correction to the exciton binding energy is given by

ΔEBph=−2ωLO(1−ε∞εs)1+ωLO/EB+3(1+1+ωLO/EB)3.(1)\Delta E_B^{\mathrm{ph}}=-2\omega_{\mathrm{LO}}\left(1-\frac{\varepsilon_\infty}{\varepsilon_s}\right)\frac{\sqrt{1+\omega_{\mathrm{LO}}/E_B}+3}{\left(1+\sqrt{1+\omega_{\mathrm{LO}}/E_B}\right)^3}. \tag*{(1)}

Using Eq. (1), we find that phonon screening reduces the exciton binding energy by only 1.82–2.91%, yielding modified values (EB′E'_B) between 0.247 and 0.342 eV (see Table II). This modest reduction indicates that ionic (phonon) contributions are negligible and that dielectric screening is dominated by the electronic component.

SystemsAEBE_B (eV)TexcT_{\mathrm{exc}} (K)rexcr_{\mathrm{exc}} (nm)∣ϕn(0)∣2\lvert\phi_n(0)\rvert^2 (1027 m−310^{27}\,\mathrm{m}^{-3})ΔEBph\Delta E_B^{\mathrm{ph}} (meV)EB′E'_B (eV)
Ba₃PA₃Cl0.35240810.970.35-10.180.342
Ba₃PA₃Br0.32838031.040.28-8.570.319
Ba₃PA₃I0.27231541.250.16-7.920.264
Ba₃AsA₃Cl0.34139540.900.44-8.020.333
Ba₃AsA₃Br0.32037101.030.29-6.870.313
Ba₃AsA₃I0.25629681.380.12-6.060.250
Ba₃SbA₃Cl0.34339771.030.29-6.250.337
Ba₃SbA₃Br0.31836871.090.25-6.090.312
Ba₃SbA₃I0.27131421.300.15-6.720.264
Ba₃BiA₃Cl0.30735591.510.09-5.760.301
Ba₃BiA₃Br0.28232701.650.07-5.840.276
Ba₃BiA₃I0.25429451.950.04-6.830.247

Table 2. Calculated excitonic parameters (EBE_B, TexcT_{\mathrm{exc}}, rexcr_{\mathrm{exc}} and ∣ϕn(0)∣2\lvert\phi_n(0)\rvert^2), phonon screening corrections (ΔEBph\Delta E_B^{\mathrm{ph}}), and modified exciton binding energy (EB′E'_B) of Ba₃MA₃ (M = P, As, Sb, Bi; A = Cl, Br, I).

To assess intrinsic carrier mobility limits, we calculated the mobility using the simulated band structures [56, 57]. In polar semiconductors, carrier scattering near room temperature is primarily governed by longitudinal optical (LO) phonons [47, 49], making polaron formation—arising from carrier-phonon interactions—essential for realistic mobility estimates. This interaction is described by the Fröhlich model [58], which introduces a dimensionless coupling constant α\alpha [58, 59]:

α=14πε012(1ε∞−1εs)e2ℏωLO(2m∗ωLOℏ)1/2.(2)\alpha= \frac{1}{4\pi\varepsilon_0}\frac{1}{2}\left(\frac{1}{\varepsilon_\infty}-\frac{1}{\varepsilon_s}\right)\frac{e^2}{\hbar\omega_{\mathrm{LO}}}\left(\frac{2m^*\omega_{\mathrm{LO}}}{\hbar}\right)^{1/2}. \tag*{(2)}

Typically, α>10\alpha> 10 indicates strong coupling, whereas α≪1\alpha\ll1 corresponds to weak coupling [56, 60]. Table III displays the calculated values lying in the range, 2.16–4.01, which place these materials in the intermediate coupling regime. Polaron formation lowers the quasiparticle energies of both electrons and holes, with the polaron energy given by [49, 61]:

Ep=(−α−0.0123α2)ℏωLO.(3)E_p = \left(-\alpha- 0.0123\alpha^2\right)\hbar\omega_{\mathrm{LO}}. \tag*{(3)}

Table III also shows a comparison of the resulting quasiparticle gaps with exciton binding energies, confirming that bound excitons are energetically more stable than charge-separated polaronic states in all compounds.

Following Feynman’s treatment of the Fröhlich Hamiltonian [62, 63], the polaron effective mass is expressed as

mp=m∗(1+α6+α240+⋯ ).(4)m_p = m^*\left(1+\frac{\alpha}{6}+\frac{\alpha^2}{40}+\cdots\right). \tag*{(4)}

As summarized in Table III, electron and hole effective masses increase by 48–107% upon polaron formation, consistent with intermediate carrier–lattice coupling. The corresponding upper bound of the polaron mobility is estimated using the Hellwarth model [55, 64]:

μp=3πe2πcωLOm∗αsinh⁡(β/2)β5/2w3v31K(a,b),(5)\mu_p = \frac{3\sqrt{\pi}e}{2\pi c\omega_{\mathrm{LO}}m^*\alpha}\frac{\sinh(\beta/2)}{\beta^{5/2}}\frac{w^3}{v^3}\frac{1}{K(a,b)}, \tag*{(5)}

where β=ℏωLO/kBT\beta=\hbar\omega_{\mathrm{LO}}/k_BT, ww and vv are temperature-dependent variational parameters, and K(a,b)K(a,b) is a function of β\beta, ww, and vv defined in Sec. XV of the SM [25]. The highest calculated mobilities are found to be 25.71 cm²V⁻¹s⁻¹ for electrons and 75.09 cm²V⁻¹s⁻¹ for holes (see Table III), indicating that despite carrier–phonon coupling, these antiperovskite derivatives retain mobilities suitable for efficient optoelectronic devices.

To further evaluate optoelectronic performance, we calculated the spectroscopic limited maximum efficiency (SLME) [65], which provides a more realistic assessment than the Shockley–Queisser (SQ) limit [66]. Before computing SLME, we examined whether optical transitions from the VBM to the CBM are allowed, as direct bandgap materials may still exhibit forbidden transitions due to inversion symmetry and identical band parities.

[49]. For this purpose, the transition dipole moment matrix element (PP) was evaluated, where P2P^{2} represents the transition probability. As shown in Figure 2 and S5, all compounds display allowed dipole transitions at the Γ\Gamma point.

Figure 3 shows the thickness-dependent SLME, computed using the BSE@G0_{0}W0_{0}@PBE+SOC approach. It increases with thickness before saturating. A clear trend is observed, with SLME rising from Cl- to Br- to I-based compounds, reflecting the more favorable band gaps of iodide systems. The maximum SLME values range from 19.10% to 32.41%. Notably, Ba3_3AsI3_3, Ba3_3SbI3_3, and Ba3_3BiA3_3 (A = Cl, Br, I) exhibit SLME values exceeding those of conventional lead-based perovskites, such as CsPbI3_3 (20.67% [67]) and MAPbI3_3 (28.97% [43]). In addition, several other key device parameters have been computed within the SLME framework (see Sec. XVI of the SM [25]). These results underscore the strong efficiency potential of antiperovskite derivatives for next-generation optoelectronic applications.

Image not extracted

Figure 3. Spectroscopic limited maximum efficiency (SLME) of (a) Ba₃PA₃, (b) Ba₃AsA₃, (c) Ba₃SbA₃, and (d) Ba₃BiA₃ (A = Cl, Br, I), calculated using the BSE@G₀W₀@PBE+SOC method.

Conclusion: In summary, we have presented a comprehensive first-principles investigation of the structural, excitonic, polaronic, and optoelectronic properties of cubic antiperovskite derivatives Ba3_3MA3_3 (M = P, As, Sb, Bi; A = Cl, Br, I). Our results establish these compounds as dynamically, thermodynamically, and mechanically stable direct-gap semiconductors with bandgaps spanning the optimal range for photovoltaic and optoelectronic applications. Explicit many-body perturbation theory calculations reveal moderate exciton binding energies and intermediate-radius excitons, indicating strong Coulomb interactions while still enabling efficient charge separation. Carrier-phonon coupling is found to be in the intermediate regime, leading to polaron formation with mobilities that remain favorable for device operation. Importantly, spectroscopic limited maximum efficiency calculations predict power conversion efficiencies of up to 32%, exceeding those of several state-of-the-art lead-based perovskites. These findings highlight the crucial role of excitonic and polaronic effects in governing charge transport and optical response in antiperovskite derivatives. Overall, this work identifies Ba-based antiperovskite derivatives as a robust, lead-free materials platform and provides key physical insights to guide the design of next-generation high-efficiency optoelectronic devices.

Acknowledgments: S.A would like to acknowledge Indian Institute of Technology Bombay, India for financial support. P.J would like to acknowledge the Council of Scientific and Industrial Research (CSIR), Government of India [Grant No. 3WS(007)/2023-24/EMR-II/ASPIRE] for financial support. The authors acknowledge the High Performance Computing Cluster (HPCC) ‘Magus’ at Shiv Nadar Institution of Eminence for providing computational resources that have contributed to the research results reported within this paper.

References

References

  1. [1]A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells, J. Am. Chem. Soc. 131, 6050 (2009).DOI
  2. [2]N.-G. Park, Organometal Perovskite Light Absorbers Toward a 20% Efficiency Low-Cost Solid-State Mesoscopic Solar Cell, J. Phys. Chem. Lett. 4, 2423 (2013).DOI
  3. [3]D. A. Egger, A. M. Rappe, and L. Kronik, Hybrid organic-inorganic perovskites on the move, Acc. Chem. Res. 49, 573 (2016).DOI
  4. [4]National Renewable Energy Laboratory (NREL), Best Research Cell Efficiency Chart, https://www.nrel.gov/pv/cell-efficiency.html, Accessed 2021-01-26 (2021).
  5. [5]D. B. Straus, S. Guo, A. M. Abeykoon, and R. J. Cava, Understanding the Instability of the Halide Perovskite CsPbI3 through Temperature-Dependent Structural Analysis, Adv. Mater. 32, 2001069 (2020).DOI
  6. [6]A. Babayigit, A. Ethirajan, M. Muller, and B. Conings, Toxicity of organometal halide perovskite solar cells, Nat. Mater. 15, 247 (2016).DOI
  7. [7]Y. Mochizuki, H.-J. Sung, A. Takahashi, Y. Kumagai, and F. Oba, Theoretical exploration of mixed-anion antiperovskite semiconductors M₃XN (M = Mg, Ca, Sr, Ba; X = P, As, Sb, Bi), Phys. Rev. Mater. 4, 044601 (2020).DOI
  8. [8]H. Zhong, C. Feng, H. Wang, D. Han, G. Yu, W. Xiong, Y. Li, M. Yang, G. Tang, and S. Yuan, Composition-Property Relationships in Antiperovskite Nitrides: Guiding a Rational Alloy Design, ACS Appl. Mater. Interfaces 13, 48516 (2021).DOI
  9. [9]D. Liu, H. Ruan, and R. Sa, Comprehensive evaluation of mechanical properties, optoelectronic features, photovoltaic performance, and crystal stability of Ba₃MX₃ (M = As, Sb; X = Cl, Br, I), Mater. Sci. Semicond. Process. 186, 109029 (2025).DOI
  10. [10]G. Tang, X. Liu, S. Wang, T. Hu, C. Feng, C. Zhu, B. Zhu, and J. Hong, Designing antiperovskite derivatives via atomic-position splitting for photovoltaic applications, Mater. Horiz. 11, 5320 (2024).DOI
  11. [11]H.-J. Feng and Q. Zhang, Predicting efficiencies >25% A₃MX₃ photovoltaic materials and Cu ion implantation modification, Appl. Phys. Lett. 118, 111902 (2021).DOI
  12. [12]M. F. Rahman, M. H. Rahman, A. Kuddus, A. R. Chaudhry, and A. Irfan, Unveiling the Structural, Electronic, Optical, Mechanical, and Photovoltaic Properties of Lead-Free Inorganic New Ba₃MBr₃ (M = As, N, P, and Sb) Perovskites, Energy Fuels 38, 7260 (2024).DOI
  13. [13]T. Hu, C. Wu, M. Li, H. Qu, L. Luo, Y. Hou, S. Li, S. Duan, D. Li, G. Tang, and C. Feng, Pressure-dependent optoelectronic properties of antiperovskite derivatives X₃AsCl₃ (X = Mg, Ca, Sr, Ba): a first-principles study, Phys. Chem. Chem. Phys. 27, 4144 (2025).DOI
  14. [14]M. A. Brogan, R. W. Hughes, R. I. Smith, and D. H. Gregory, Structural studies of magnesium nitride fluorides by powder neutron diffraction, J. Solid State Chem. 185, 213 (2012).DOI
  15. [15]M. R. Talukder, M. M. Hasan, N. M. Nayeem, M. Rafiqul Islam, J. Y. Al-Humaidi, M. R. Islam, and M. M. Rana, Theoretical insights into novel Ba₃MX₃ (M = P, Sb; X = F, Cl) perovskites for advanced optoelectronics: A first-principles DFT study, Comput. Theor. Chem. 1248, 115239 (2025).DOI
  16. [16]A. Ghosh, M. Ferdous Rahman, A. Kuddus, M. K. Mohammed, M. Rasidul Islam, S. Bhattaraj, A. R. Chaudhry, and A. Irfan, Investigating of novel inorganic cubic perovskites of A₃BX₃ (A=Ca, Sr, Pb, As, X=I, Br) and their photovoltaic performance with efficiency over 28%, J. Alloys Compd. 986, 174097 (2024).DOI
  17. [17]M. M. Islam, M. F. Rahman, M. H. Rahman, M. Z. Bani-Fwaz, R. Pandey, and M. Harun-Or-Rashid, Unlocking the lead-free new all inorganic cubic halide perovskites of Ba₃MI₃ (M = P, As, Sb) with efficiency above 29%, J. Mater. Sci. 59, 22109 (2024).DOI
  18. [18]P. Hohenberg and W. Kohn, Inhomogeneous Electron Gas, Phys. Rev. 136, B864 (1964).
  19. [19]W. Kohn and L. J. Sham, Self-Consistent Equations Including Exchange and Correlation Effects, Phys. Rev. 140, A1133 (1965).DOI
  20. [20]M. Gajdoš, K. Hummer, G. Kresse, J. Furthmüller, and F. Bechstedt, Linear optical properties in the projector-augmented wave methodology, Phys. Rev. B 73, 045112 (2006).DOI
  21. [21]H. Jiang, P. Rinke, and M. Scheffler, Electronic properties of lanthanide oxides from the GW perspective, Phys. Rev. B 86, 125115 (2012).DOI
  22. [22]F. Fuchs, C. Rödl, A. Schleife, and F. Bechstedt, Efficient O(N²) approach to solve the bethe-salpeter equation for excitonic bound states, Phys. Rev. B 78, 085103 (2008).DOI
  23. [23]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).pubmed.ncbi.nlm.nih.gov/9984901
  24. [24]G. Kresse and J. Furthmüller, Efficiency of Ab-initio Total Energy Calculations for Metals and Semiconductors Using a Plane-wave Basis Set, Comput. Mater. Sci. 6, 15 (1996).DOI
  25. [25]See Supplemental Material (SM) at [URL will be inserted by publisher] for computational details, octahedral parameters, phonon dispersions, decomposition energies, mechanical properties, electronic density of states, spin–orbit coupling effects on bandgaps, G₀W₀@PBE+SOC band structures and transition probabilities, dielectric functions from BSE+SOC, exciton binding energies from the Wannier-Mott model, excitonic parameters, phonon frequencies, polaron mobility parameters, and SLME.
  26. [26]P. E. Blöchl, Projector augmented-wave method, Phys. Rev. B 50, 17953 (1994).pubmed.ncbi.nlm.nih.gov/9976227
  27. [27]K. Momma and F. Izumi, VESTA3 for three-dimensional visualization of crystal, volumetric and morphology data, J. Appl. Crystallogr. 44, 1272 (2011).DOI
  28. [28]A. Togo, L. Chaput, T. Tadano, and I. Tanaka, Implementation strategies in phonopy and phono3py, J. Phys. Condens. Matter 35, 353001 (2023).DOI
  29. [29]A. M. Ganose, A. F. Jackson, and D. O. Scanlon, sumo: Command-line tools for plotting and analysis of periodic ab initio calculations, J. Open Source Softw. 3, 717 (2018).DOI
  30. [30]F. Mouhat and F.-X. Coudert, Necessary and sufficient elastic stability conditions in various crystal systems, Phys. Rev. B 90, 224104 (2014).DOI
  31. [31]V. Wang, N. Xu, J.-C. Liu, G. Tang, and W.-T. Geng, VASPKIT: A user-friendly interface facilitating high-throughput computing and analysis using VASP code, Comput. Phys. Commun. 267, 108033 (2021).
  32. [32]Z.-j. Wu, E.-j. Zhao, H.-p. Xiang, X.-f. Hao, X.-j. Liu, and J. Meng, Crystal structures and elastic properties of superhard IrN₂ and IrN₃ from first principles, Phys. Rev. B 76, 054115 (2007).DOI
  33. [33]R. Hill, The Elastic Behaviour of a Crystalline Aggregate, Proc. Phys. Soc. A 65, 349 (1952).DOI
  34. [34]J. Even, L. Pedesseau, C. Katan, M. Kepenekian, J.-S. Lauret, D. Sapori, and E. Deleporte, Solid-State Physics Perspective on Hybrid Perovskite Semiconductors, J. Phys. Chem. C 119, 10161 (2015).DOI
  35. [35]K. Ohara, T. Yamada, H. Tahara, T. Aharen, H. Hirori, H. Suzura, and Y. Kanemitsu, Exciton enhancement of optical nonlinearities in perovskite CH₃NH₃PbCl₃ single crystals, Phys. Rev. Mater. 3, 111601 (2019).DOI
  36. [36]C. D. Spataru, S. Ismail-Beigi, R. B. Capaz, and S. G. Louie, Theory and Ab Initio Calculation of Radiative Lifetime of Excitons in Semiconducting Carbon Nan- otubes, Phys. Rev. Lett. 95, 247402 (2005)
  37. [37]X. Liu, Y. Li, Y. Wu, J. Zhang, X. Jiang, Q. Ren, B. Zhu, J. Hong, and G. Tang, Effect of four-phonon scattering and strong anharmonicity on the thermal conductivity of the antiperovskite derivatives Ba₃Biₓ (X = Br, I), Phys. Rev. B 112, 134303 (2025).DOI
  38. [38]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized Gradient Approximation Made Simple, Phys. Rev. Lett. 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
  39. [39]J. Heyd, G. E. Scuseria, and M. Ernzerhof, Hybrid functionals based on a screened Coulomb potential, J. Chem. Phys. 118, 8207 (2003).DOI
  40. [40]L. Hedin, New method for calculating the one-particle green’s function with application to the electron-gas problem, Phys. Rev. 139, A796 (1965).DOI
  41. [41]M. S. Hybertsen and S. G. Louie, First-Principles Theory of Quasiparticles: Calculation of Band Gaps Semiconductors and Insulators, Phys. Rev. Lett. 55, 1418 (1985).pubmed.ncbi.nlm.nih.gov/10031814
  42. [42]H. M. Ghaithan, S. M. H. Qaid, Z. A. Alahmed, M. Hezam, A. Lyras, M. Amer, and A. S. Aldwayyan, Anion Substitution Effects on the Structural, Electronic, and Optical Properties of Inorganic CsPb(Br₁₋ₓBrₓ)₃ and CsPb(Br₁₋ₓClₓ)₃ Perovskites: Theoretical and Experimental Approaches, J. Phys. Chem. C 125, 886 (2021).
  43. [43]Q. Sun, H. Chen, and W.-J. Yin, Do Chalcogenide Double Perovskites Work as Solar Cell Absorbers: A First-Principles Study, Chem. Mater. 31, 244 (2019).DOI
  44. [44]S. Albrecht, L. Reining, R. Del Sole, and G. Onida, Ab Initio Calculation of Excitonic Effects in the Optical Spectra of Semiconductors, Phys. Rev. Lett. 80, 4510 (1998).DOI
  45. [45]M. Rohlfing and S. G. Louie, Electron-Hole Excitations in Semiconductors and Insulators, Phys. Rev. Lett. 81, 2312 (1998).
  46. [46]S. Adhikari and P. Johari, Theoretical insights into monovalent-metal-cation transmutation effects on lead-free halide double perovskites for optoelectronic applications, Phys. Rev. Mater. 7, 075401 (2023).DOI
  47. [47]S. Adhikari and P. Johari, Capturing optoelectronic properties of Cs₂AgSbBr₆₋ₓClₓ (x = 0 − 6) double perovskites using many-body perturbation theory, Phys. Rev. B 110, 014101 (2024).DOI
  48. [48]X. Chen, H. Lu, Y. Yang, and M. C. Beard, Excitonic Effects in Methylammonium Lead Halide Perovskites, J. Phys. Chem. Lett. 9, 2595 (2018).DOI
  49. [49]S. Adhikari and P. Johari, Photovoltaic properties of ABSe₃ chalcogenide perovskites (A = Ca, Sr, Ba; B = Zr, Hf), Phys. Rev. B 109, 174114 (2024).DOI
  50. [50]M. Bokdam, T. Sander, A. Stroppa, D. D. P. P. Picozzi, D. D. Sarma, C. Franchini, and G. Kresse, Role of Polar Phonons in the Photo Excited State of Metal Halide Perovskites, Sci. Rep. 6, 28618 (2016).
  51. [51]C. D. Spataru and F. Leonard, Quasiparticle and exciton renormalization effects in electrostatically doped semiconducting carbon nanotubes, Chem. Phys. 413, 81 (2013).DOI
  52. [52]A. S. Toulouse, B. P. Isaacoff, G. Shi, M. Matuchová, E. Kioupakis, and R. Merlin, Frenkel-like Wannier-Mott excitons in few-layer PbI₂, Phys. Rev. B 91, 165308 (2015).DOI
  53. [53]R.-I. Biega, Y. Chen, M. R. Filip, and L. Leppert, Chemical Mapping of Excitons in Halide Double Perovskites, Nano Lett. 23, 8155 (2023).DOI
  54. [54]M. R. Filip, J. B. Haber, and J. B. Neaton, Phonon Screening of Excitons in Semiconductors: Halide Perovskites and Beyond, Phys. Rev. Lett. 127, 067401 (2021).DOI
  55. [55]R. W. Hellwarth and I. Biaggio, Mobility of an electron in a multimode polar lattice, Phys. Rev. B 60, 299 (1999).DOI
  56. [56]J. M. Frost, Calculating polaron mobility in halide perovskites, Phys. Rev. B 96, 195202 (2017).DOI
  57. [57]L. M. Herz, Charge-Carrier Mobilities in Metal Halide Perovskites: Fundamental Mechanisms and Limits, ACS Energy Lett. 2, 1539 (2017).DOI
  58. [58]H. Fröhlich, Electrons in lattice fields, Adv. Phys. 3, 325 (1954).
  59. [59]S. Adhikari and P. Johari, Unveiling the impact of trivalent metal cation transmutation on Cs₂AgM(III)Cl₆ double perovskites using many-body perturbation theory, Phys. Rev. B 112, 195208 (2025).DOI
  60. [60]S. Adhikari, A. Chakravorty, and P. Johari, Optical and polaronic properties of vacancy-ordered double perovskites: A first-principles investigation, Phys. Rev. B 113, 045204 (2026).DOI
  61. [61]S. Adhikari and P. Johari, Optimizing lead-free chalcogenide perovskites for high-efficiency photovoltaics via alloying, Phys. Rev. B 112, 085206 (2025).
  62. [62]R. P. Feynman, Slow Electrons in a Polar Crystal, Phys. Rev. 97, 660 (1955).DOI
  63. [63]S. Adhikari and P. Johari, Probing Optoelectronic Properties of Stable Vacancy-Ordered Double Perovskites: Insights from Many-Body Perturbation Theory, Adv. Theory Simul. 8, 2400921 (2025).DOI
  64. [64]S. Adhikari, S. Das, and P. Johari, Post-transition metal Sn-based chalcogenide perovskites: a promising lead-free and transitional metal alternative for stable, high-performance photovoltaics, J. Mater. Chem. C 13, 7792 (2025).
  65. [65]L. Yu and A. Zunger, Identification of Potential Photovoltaic Absorbers Based on First-Principles Spectroscopic Screening of Materials, Phys. Rev. Lett. 108, 068701 (2012).pubmed.ncbi.nlm.nih.gov/22401127
  66. [66]W. Shockley and H. J. Queisser, Detailed Balance Limit of Efficiency of p-n Junction Solar Cells, J. Appl. Phys. 32, 510 (2004).
  67. [67]H. Zou, Y. Duan, S. Yang, D. Xu, L. Yang, J. Cui, H. Zhou, M. Wu, J. Wang, X. Lei, N. Zhang, and Z. Liu, 20.67%-Efficiency Inorganic CsPbBr₃ Solar Cells Enabled by Zwitterion Ion Interface Treatment, Small 19, 2206205 (2023).DOI

Paper details

vlnc:W_vuktkztd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents