betaFeedback

WorksPhysics and Astronomy

Probing switchable valley-related Hall effects in 2D magnetic MXenes

Abstract

The search for two-dimensional materials with exotic valley-dependent properties has attracted rapid attention as they are fundamentally intriguing and practically appealing for nanoscale device applications. Here, using first-principles calculations, we report the identification of promising intrinsic valley-related switchable Hall effects in Cr2CSF. With a high out-of-plane magnetic anisotropy, Cr2CSF is a ferrovalley semiconductor with spontaneously polarized valleys having a valley polarization of 27.1 meV in the conduction band. This facilitates the observation of an intrinsic anomalous valley Hall (AVH) effect that is manipulated under an in-plane electric field. The underlying physics of spontaneous valley polarization is also discussed based on the SOC Hamiltonian model. Furthermore, on application of unidirectional compressive strain, Cr2CSF is further transitioned from the AVH phase to a long-sought quasi-half valley metal state. Here, only the electrons are valley polarized such that holes and electrons carriers are separated under the in-plane electric field. Our work enriches materials with the valley-related Hall effects and provides a platform for interplay among valleytronics and spintronics.

Introduction

Valley, the energy extreme of valence or conduction bands, in a two-dimensional (2D) lattice can be used as a degree of freedom for the carriers in condensed matter materials [1, 2]. Given the considerable separation in the momentum space, scattering between these valleys can be effectively suppressed, allowing electrons, holes, or excitons to be manipulated for a longer period of time. Therefore, the valley index is robust against the long-range impurity scattering [3, 4, 5]. Among 2D materials, the transition metal dichalcogenides have acquired significant attention due to their exceptional and tunable properties [6, 7, 8, 9, 10, 11, 12]. In these strong spin-orbital coupling (SOC) systems, the valley degree of freedom is present due to the inversion asymmetry. To make use of the valley index of these nonmagnetic materials as an information carrier, it is essential to remove the energy degeneracy between inequivalent valleys by breaking the time reversal symmetry [13]. Subsequently, attempts have been made to extrinsically induce valley polarization by employing various approaches, such as optical pumping [8, 9], application of magnetic fields [10], utilization of magnetic substrates [11], and introduction of magnetic doping [12]. Nevertheless, these methods are quite fragile and often come at the cost of altering the intrinsic energy band structures and crystal configurations.

Therefore, to conquer these challenges, it is urgent to seek materials showing anomalous valley Hall (AVH) effect rooted in spontaneous valley polarization. Indeed, there has been an exciting development in this field in the form of ferrovalley (FV) semiconductors, which break both time-reversal and space-inversion symmetries. These FV materials exhibit this unique characteristic, offering an unprecedented solution to the aforementioned challenges and hold significant potential for advancements in valleytronics applications. However, such materials are currently scarce and only a handful of potential systems have been suggested which include 2H-VSe2_2 [14], 2H-FeCl2_2 [15], Nb3_3I8_8 [16], VSi2_2N4_4 [17], and GdI2_2 [18]. Nevertheless, most of these existing systems suffer from in-plane magnetization [14, 16, 18], which substantially hinders the emergence of natural valley polarization. Therefore, there exists a pressing need to explore new candidates that exhibit spontaneous valley polarization, particularly those inherently characterized by robust out-of-plane magnetization.

MXenes, which are 2D transition metal carbon and nitrogen compounds, have gained much attention following their successful experimental preparation [19, 20, 21]. The general formula of MXene can be written as Mn+1_{n+1}Xn_nTx_x (n=1−3n = 1 - 3), where M denotes a transition metal; X denotes C or N; T denotes surface terminations like Cl, F, O, OH [22]. They have been investigated in applications like nanocomposites and hybrid materials [23, 24]. More recently, they have been proposed in valleytronics and only a few systems have been studied for their valley-dependent properties [25, 26]. Ferromagnetic (FM) MXenes like Cr2_2C display an adjustable magnetism upon symmetric or asymmetric surface functionalization along with high Curie or Néel temperatures [27].

In this study, we present the discovery of various intrinsic valley-related Hall effects in 2D Cr2CSF\mathrm{Cr}_{2}\mathrm{CSF} MXene based on first-principles calculations. Our findings reveal that this material acts as a FM semiconductor, with band edges situated at the +K and −K points. Of paramount importance is the spontaneous polarization of these valleys and the presence of substantially high out-of-plane magnetization which is also shown by SOC model Hamiltonian studies. Moreover, uniaxial strain yields quasi-half valley metal (QHVM) phase in Cr2CSF\mathrm{Cr}_{2}\mathrm{CSF} monolayer.

Computational Methods

The calculations are performed at density functional theory (DFT) [28, 29] level with the projector augmented wave (PAW) [30, 31] method implemented in Vienna ab initio Simulation Package (VASP) [32] code. The exchange-correlation interactions are treated by generalized gradient approximation (GGA) in the form of the Perdew-Burke-Ernzerhof (PBE) functional [33]. The cutoff energy of 520 eV is used for the plane wave basis set such that the total energy calculations are converged within 10−510^{-5} eV. The vacuum in zz-direction is set to 30 Å to avoid artificial interactions caused by the periodic boundary conditions. The 11×11×111 \times11 \times1 kk-grid is used to sample the 2D Brillouin zone. All the structural parameters are fully optimized until the Hellmann-Feynman forces are smaller than 1 meV/Å. Considering the strong correction effect for the localized 3d3d electrons of Cr atoms, the GGA+UU method is employed [34]. This is implemented using Dudarev et al.’s rotationally invariant approach where only the effective U (UeffU_{\mathit{eff}}) based on the difference between the on-site Coulomb interaction parameter and exchange parameters is meaningful [35]. Following the previous works [36, 37], the U value for Cr 3d3d orbitals is chosen as 3.5 eV. Hybrid functional Heyd-Scuseria Ernzerhof (HSE06) is also used to confirm the results of GGA+UU calculations [38]. The dynamical stabilities are calculated using density functional perturbation theory using PHONOPY code [39] with a 6×6×16 \times6 \times1 supercell. Berry curvatures are obtained from the maximally localized Wannier functions as implemented in WANNIER90 [40].

Results and Discussion

Cr2_2CSX (X = F, O, H, Cl, Br, and I) can be surface engineered by functionalizing Cr2_2C MXene in different ways, generating four distinct structures in each case [see Sec. I of Supplemental Material (SM)] [27]. Type II is the most energetically stable configuration among all Janus Cr2_2CSX MXenes [see Sec. II of SM]. We have taken Cr2_2CSF as a prototype for studying the valley properties because of its higher value of spontaneous valley polarization and other promising characteristics which will be discussed in the subsequent sections. The energetic stability of Type II structure of Cr2_2CSF has also been confirmed by HSE06 functional calculations [see Sec. III of SM]. Cr2_2CSF exhibits a hexagonal lattice structure characterized by the P3m1 space group [Fig. 1(b)]. Each unit cell contains one C, one S, one F, and two Cr atoms, which are stacked in the sequence of F-Cr-C-Cr-S. To probe the bonding nature of Cr2_2CSF MXene, we have calculated the electron localization function within the plane encompassing F-Cr-C-Cr-S. Figure 1(c) suggests an ionic bonding character for all the bonds as the electrons are predominantly localized around the atoms.

Image not extracted

Figure 1. (a) Side and top views of Cr2_2CSF. (b) Hexagonal 2D Brillouin zone. (c) Electron localization function map of Cr2_2CSF, which is renormalized to values between 0 for charge depletion and 1 for charge accumulation.

Afterwards, the absence of negative frequencies in the phonon dispersion plot of Cr2_2CSF confirms the dynamical stability [Fig. 2(a)]. The spin-polarized charge density for Cr2_2CSF is illustrated in Figure 2(b), depicting the spontaneous spin polarization. Further, to ascertain the preferred magnetic ground state configuration of Cr2_2CSF MXene, we have analyzed the FM and three antiferromagnetic (AFM) states [see Sec. IV of SM]. Cr2_2CSF prefers the FM coupling over AFM couplings. The valence electronic configuration of the Cr atom is 3d54s13d^{5}4s^{1}. According to the local symmetry of the crystal field surrounding the Cr magnetic ions, the five fold degenerate 3d3d orbitals split into three categories i.e., A′(dz2)A'(d_{z^{2}}), E′(dyz+dxz)E'(d_{yz}+d_{xz}) and E′′(dx2−y2+dxy)E''(d_{x^{2}-y^{2}}+d_{xy}), as shown in Figure 2(c) [41]. Upon functionalization, both the Cr atoms are coordinated to different atoms. CrF_F atoms (Cr atom bound to F atom) have the electronic configuration of 3d34s03d^{3}4s^{0} while the electronic configuration of CrS_S atoms (Cr atom bound to S atom) is 3d24s03d^{2}4s^{0}. As anticipated, the calculated magnetic moment per unit cell for Cr2_2CSF is 5 μB\mu_B where μB\mu_B (Bohr magneton) where CrF_F and CrS_S atoms have the magnetic moment 2.9 μB\mu_B and 2.7 μB\mu_B, respectively. This preferred FM coupling in Cr2_2CSF is attributed to the double-exchange mechanism as the magnetic exchange arises between the ions in different oxidation states [27].

Image not extracted

Figure 2. (a) Phonon dispersion map of Cr2CSF\mathrm{Cr_2CSF}. (b) Spin-polarized charge densities on Cr2CSF\mathrm{Cr_2CSF} MXene, where spin-up density is shown in yellow. (c) The predicted occupations of dd orbitals on CrS\mathrm{Cr_S} and CrF\mathrm{Cr_F} atoms.

Furthermore, the magnetic anisotropy energy (MAE) of Cr2_2CSF MXene has been calculated to determine its magnetization easy axis. MAE is defined as the energy difference between the in-plane and the out-of-plane magnetization: MAE=Ex/y−Ez\mathrm{MAE}=E_{x/y}-E_z. The negative/positive MAE means an easy axis along the in-plane/out-of-plane direction. Due to C3vC_{3v} point group symmetry, energy is degenerate for magnetization along arbitrary in-plane direction. Therefore, we have chosen in-plane direction to be along xx direction [42]. The MAE for monolayer Cr2CSF\mathrm{Cr_2CSF} is calculated to be 1.16 meV per unit cell, suggesting that its easy axis is along the out-of-plane direction. This substantially high MAE value suggests that the out-of-plane magnetization is robust. This stability is advantageous for establishing the long-range magnetic order, and is tantalizing for realizing the spontaneous valley polarization that has been discussed later. The observed value of MAE in our material exceeds that of Ni, Fe, and Co, which typically have MAE values of the order 1 μ\mueV per unit cell [43] and higher than that for VSi2P4\mathrm{VSi_2P_4} [44], Cr2Se3\mathrm{Cr_2Se_3} [37], and Cr2S3\mathrm{Cr_2S_3} [45]. Evidently, in materials suffering from in-plane magnetization, achieving out-of-plane magnetization through external methods is challenging [11, 46, 47]. However, in Cr2CSF\mathrm{Cr_2CSF} no such external means are required, making it more superior for practical applications.

We have further turned to the electronic structure calculations of Cr2CSF\mathrm{Cr_2CSF} MXene. Figure 3(a) presents the band structure of Cr2CSF\mathrm{Cr_2CSF} without SOC. Because of the intrinsic spin-polarization, the spin-up and spin-down channels split significantly. The bands near Fermi level are contributed by spin-down states in the valence band and spin-up states in the conduction band. As the extrema of conduction and valence bands arise from opposite spin channels, it is therefore called a bipolar FM semiconductor [48]. Cr2CSF\mathrm{Cr_2CSF} has an indirect band gap of 0.34 eV. Furthermore, the conduction band minimum (CBM) is situated at +K+K and −K-K points, giving rise to a pair of energetically equivalent valleys within the conduction band. In case of the valence band, although the valence band maximum (VBM) is located at the Γ\Gamma point,

Image not extracted

Figure 3. Band structure of Cr2CSF\mathrm{Cr_2CSF} (a) without SOC, (b) with SOC for out-of-plane magnetization (inset is showing the valley splitting in conduction band). (c) Orbital projected band structure for Cr atom. (d) Band structure for in-plane magnetization.

local extrema at the +K+K and −K-K points are also formed, providing monolayer Cr2CSF\mathrm{Cr_2CSF} with a pair of degenerate valleys within the valence band also. Both of these valley pairs originate from the spin-up channels. When SOC is included, the valley at +K+K shifts upwards and −K-K shifts downwards, producing a spontaneous valley polarization of 27.1 meV in the conduction band (see Figure 3(b)). Whereas in the valence band, the valley at +K+K shifts downwards and −K-K shifts upwards, leading to a spontaneous valley polarization of 46.8 meV, giving a total valley polarization of 73.9 meV. However, the valleys in valence band lie far away from the Fermi level, rendering them not suitable for practical applications. Therefore, we have solely focused on the pair of valleys in the conduction band. Alongside, we have plotted the band structures for Cr2CSX\mathrm{Cr_2CSX} (X= O, H, Cl, Br, and I) [see Sec. V of SM]. Cr2CSCl\mathrm{Cr_2CSCl} and Cr2CSI\mathrm{Cr_2CSI} show a small valley polarization of 19.8 meV and 0.8 meV, respectively, in the conduction band, whereas no significant valley polarization has been observed for Cr2CSO\mathrm{Cr_2CSO}, Cr2CSI\mathrm{Cr_2CSI} and Cr2CSH\mathrm{Cr_2CSH}.

The spontaneous valley polarization in monolayer Cr2CSF\mathrm{Cr_2CSF} is attributed to the combined effects of time-reversal symmetry breaking, inversion symmetry breaking, and the presence of a strong SOC interaction. In addition to above, the out-of-plane magnetic anisotropy is essential for spontaneous polarization of valleys [37]. To show this, we have plotted the band structure of Cr2CSF\mathrm{Cr_2CSF} by taking the magnetization direction as in-plane and no valley polarization has been observed in this case [Fig. 3 (c)]. To gain a deeper understanding of the influence of magnetization orientation on valley polarization, we have employed a simple model to describe the SOC term as follows [49, 50]:

H^SOC0+H^SOC1=λS^z′L^z(1)\hat{H}^{0}_{\mathrm{SOC}}+\hat{H}^{1}_{\mathrm{SOC}}=\lambda\hat{S}_{z'}\hat{L}_{z} \tag*{(1)}

Here, H^SOC0\hat{H}^{0}_{\mathrm{SOC}} represents the interaction between identical spin states, while H^SOC1\hat{H}^{1}_{\mathrm{SOC}} represents the interaction between opposite spin states. L^z\hat{L}_{z} and S^z′\hat{S}_{z'} represent the operators for orbital angular momentum and spin angular momentum, respectively. Further, due to the FM spin splitting, the valleys are predominantly contributed by either the spin-up or spin-down states. In Cr2CSF\mathrm{Cr_2CSF}, both the valleys of conduction band are contributed by spin-up states only and interactions between opposite spin states have a negligible effect on the valleys. Therefore, we have focused on same spin states and H^SOC1\hat{H}^{1}_{\mathrm{SOC}} has been neglected. H^SOC0\hat{H}^{0}_{\mathrm{SOC}} can be expressed as:

H^SOC0=λS^z′(L^zcos⁡θ+12L^+e−iϕsin⁡θ+12L^−eiϕsin⁡θ)(2)\hat{H}^{0}_{\mathrm{SOC}}=\lambda\hat{S}_{z'}\left(\hat{L}_{z}\cos\theta+\frac{1}{2}\hat{L}_{+}e^{-i\phi}\sin\theta+\frac{1}{2}\hat{L}_{-}e^{i\phi}\sin\theta\right) \tag*{(2)}

Here, the magnetization is out-of-plane, i.e., θ=0\theta=0. Therefore, the above equation is simplified to:

H^SOC0=λS^z′L^z(3)\hat{H}^{0}_{\mathrm{SOC}}=\lambda\hat{S}_{z'}\hat{L}_{z} \tag*{(3)}

To proceed further, we have seen in Figure 3 (d) that the valleys in conduction band are predominantly composed of dxzd_{xz} and dyzd_{yz} orbitals of the Cr atoms. Therefore, the basis wave vectors are chosen in the following form:

∣ϕcτ⟩=12(∣dxz⟩+iτ∣dyz⟩)⊗∣↑⟩(4)\left|\phi_{c}^{\tau}\right\rangle=\frac{1}{\sqrt{2}}\left(\left|d_{xz}\right\rangle+i\tau\left|d_{yz}\right\rangle\right)\otimes\left|\uparrow\right\rangle \tag*{(4)}

where cc represents the conduction band and τ=±1\tau=\pm1 corresponds to +K/−K+K/-K valley. The energy level at +K/−K+K/-K can be denoted by following formula:

Ec+K/−K=⟨ϕcτ|H^SOC0|ϕcτ⟩=iτ2⟨dxz,↑|H^SOC0|dyz,↑⟩−⟨dyz,↑|H^SOC0|dxz,↑⟩=iτ2λβ⟨dxz|L^z|dyz⟩−⟨dyz|L^z|dxz⟩(5)\begin{aligned} E_{c}^{+K/-K}=\left\langle\phi_{c}^{\tau}\middle|\hat{H}^{0}_{\mathrm{SOC}}\middle|\phi_{c}^{\tau}\right\rangle\\ &=\frac{i\tau}{2}\left\langle d_{xz},\uparrow\middle|\hat{H}^{0}_{\mathrm{SOC}}\middle|d_{yz},\uparrow\right\rangle-\left\langle d_{yz},\uparrow\middle|\hat{H}^{0}_{\mathrm{SOC}}\middle|d_{xz},\uparrow\right\rangle\\ &=\frac{i\tau}{2}\lambda\beta\left\langle d_{xz}\middle|\hat{L}_{z}\middle|d_{yz}\right\rangle-\left\langle d_{yz}\middle|\hat{L}_{z}\middle|d_{xz}\right\rangle \tag*{(5)} \end{aligned}

where β=⟨↑|S^z′|↑⟩\beta=\left\langle\uparrow\middle|\hat{S}_{z'}\middle|\uparrow\right\rangle, L^z∣dxz⟩=i∣dyz⟩\hat{L}_{z}|d_{xz}\rangle=i|d_{yz}\rangle, and L^z∣dyz⟩=−i∣dxz⟩\hat{L}_{z}|d_{yz}\rangle=-i|d_{xz}\rangle. Therefore, the valley polarization in the conduction band of Cr2CSF\mathrm{Cr_2CSF} is obtained through

ΔEc=Ec+K−Ec−K=iλβ⟨dxz|L^z|dyz⟩−iλβ⟨dyz|L^z|dxz⟩=2λβ(6)\begin{aligned} \Delta E_{c}=E_{c}^{+K}-E_{c}^{-K} \\ &=i\lambda\beta\left\langle d_{xz}\middle|\hat{L}_{z}\middle|d_{yz}\right\rangle-i\lambda\beta\left\langle d_{yz}\middle|\hat{L}_{z}\middle|d_{xz}\right\rangle\\ &=2\lambda\beta \tag*{(6)} \end{aligned}

On the other hand, if magnetic orientation is in-plane, i.e., θ=π2\theta=\frac{\pi}{2}, we get:

H^SOC0=λS^z′(12L^+e−iϕ+12L^−eiϕ)(7)\hat{H}^{0}_{\mathrm{SOC}}=\lambda\hat{S}_{z'}\left(\frac{1}{2}\hat{L}_{+}e^{-i\phi}+\frac{1}{2}\hat{L}_{-}e^{i\phi}\right) \tag*{(7)}

In this case, ΔEc=0\Delta E_{c}=0, i.e., no spontaneous valley polarization. Therefore, we can conclude that SOC and out-of-plane magnetic orientation are necessary for achieving spontaneous valley polarization.

Further, Berry curvature has been an invaluable tool for examining the Hall effect. Particularly in hexagonal systems where space inversion symmetry is broken, it has been observed that charge carriers within the +K+K and −K-K valleys tend to acquire a non-zero Berry curvature. Furthermore, when time reversal symmetry is also broken, an interesting characteristic emerges: a contrasting feature between valleys becomes apparent. Therefore, to understand the valley-related properties of Cr2CSF\mathrm{Cr_2CSF} we have calculated the Berry curvature using Kubo formula [51]:

Ω(K)=−∑n∑m≠n2Im⁡⟨ψnk∣v^x∣ψmk⟩⟨ψmk∣v^y∣ψnk⟩(En−Em)2(8)\Omega(\mathrm{K})=-\sum_{n}\sum_{m\ne n}\frac{2\operatorname{Im}\langle\psi_{nk}|\hat{v}_{x}|\psi_{mk}\rangle\langle\psi_{mk}|\hat{v}_{y}|\psi_{nk}\rangle}{(E_{n}-E_{m})^{2}} \tag*{(8)}

Here, fnf_{n} is the Fermi-Dirac distribution function, EnE_{n} represents the eigenvalue of the Bloch state ∣ψnk⟩|\psi_{nk}\rangle and v^x\hat{v}_{x} and v^y\hat{v}_{y} are the velocity operator components.

The Berry curvature as a curve along the path and contour map over the 2D Brillouin zone is shown in Figure 4(a) and (b), respectively. At the high symmetry points +K+K and −K-K, the Berry curvature exhibits opposite signs, with absolute magnitudes of −6.21-6.21 and 8.258.25 Å2^{2} at +K+K and −K-K, respectively. Consequently, the integral of Berry curvature around one valley differs from that around the other, leading to measurable Hall conductivity, known as the AVH effect. The anomalous Hall effect in FV materials is termed as AVH effect because an additional component of Hall conductivity is added which occurs due to the spontaneous valley polarization. AVH can be observed in Cr2CSF\mathrm{Cr}_2\mathrm{CSF} under the effect of an in-plane electric field. Under this field, the Bloch electrons will gain an anomalous velocity, which is equal to the cross product of in-plane electric field and Berry curvature i.e., v∼E×Ω(k)v \sim E \times\Omega(\mathbf{k}) [52, 53, 54]. Now, via electron doping the Fermi level can be shifted to an energy position between −K-K valley and +K+K valley. The spin-up electrons in −K-K valley will start moving with anomalous velocity and get accumulated on the right side of the sample as seen in schematic Figure 4(c).

Image not extracted

Figure 4. (a) Berry curvature of Cr2CSF\mathrm{Cr_2CSF} along the high symmetry path. (b) Contour diagram of Berry curvature. (c) Schematic of AVH in Cr2CSF\mathrm{Cr_2CSF} under the in-plane electric field and electron doping showing the movement of electrons towards right edge of the sample.

The effect of external strain has been well-known in modulation of electronic properties [5, 6, 55, 56, 57]. Consequently, we have applied uniaxial strain in yy-direction to understand the effect of strain on valley-related properties of Cr2CSF\mathrm{Cr}_2\mathrm{CSF}. On reducing the yy-dimension in Cr2CSF\mathrm{Cr}_2\mathrm{CSF} by 3.5%, an intriguing QHVM has been observed. In QHVM, the CBM and VBM slightly touch the Fermi level such that both the electron and hole carriers coexist but only one type of charge carriers are valley polarized. As seen in the electronic band structure in Figure 5(a), CBM touches the Fermi level at −K-K while VBM touches the Fermi level at M. The Berry curvature along the 2D Brillouin zone only occurs around +K+K and −K-K valleys with opposite signs and unequal magnitudes (−4.21-4.21 and 6.156.15 Å2^2) as shown in Figure 5(b).

Image not extracted

Figure 5. (a) Band structure of Cr2CSF\mathrm{Cr}_2\mathrm{CSF} under uniaxial strain of 3.5% showing QHVM phase. (b) Berry curvature of Cr2CSF\mathrm{Cr}_2\mathrm{CSF} along the high symmetry path. (c) Schematic of hole-electron charge carriers separation on application of in-plane electric field.

Fig. 5(b). On application of in-plane electric field, the electronic carriers of the −K-K valley turn towards one edge of the sample while the hole carriers of the M valley move in a straight line along the applied electric field (see Figure 5(c)). Therefore, we can detect the AVH effect in Cr2CSF\mathrm{Cr}_2\mathrm{CSF} by direct electric measurement, facilitating the practical valleytronic applications. The present research provides a tantalizing candidate for realizing and manipulating valley and spin physics.

Conclusions

To summarize, using first-principles calculations, we have studied the valley-dependent properties of Cr2CSX\mathrm{Cr}_2\mathrm{CSX} MXenes. Our results reveal that monolayer Cr2CSF\mathrm{Cr}_2\mathrm{CSF} is an indirect band gap FM semiconductor exhibiting an intrinsic out-of-plane magnetization with a large MAE value of 1.16 meV. This out-of-plane magnetization and time-reversal symmetry breaking leads to spontaneous valley polarization of 27.1 meV in the conduction band. The underlying physics of spontaneous valley polarization has also been discussed in detail based on the SOC Hamiltonian model. This spontaneous valley polarization causes observation of AVH effect under in-plane electric field and electron doping, leading to a separation of charge carriers. Additionally, we have revealed that the valley-related switchable Hall effects can be effectively engineered by the application of strain. On application of uniaxial strain of 3.5% in Cr2CSF\mathrm{Cr}_2\mathrm{CSF}, QHVM has been observed. The hole and electron charge carriers are separated in the presence of in-plane electric field. Existence of switchable Hall effects and presence of very high out-of-plane MAE in this material makes it promising for applications in valleytronics.

Acknowledgement

A.P. acknowledges IIT Delhi for the senior research fellowship. S.S. acknowledges CSIR, India, for the senior research fellowship [grant no. 09/086(1432)/2019-EMR-I]. S.B. acknowledges financial support from SERB under a core research grant (grant no. CRG/2019/000647) to set up his High Performance Computing (HPC) facility “Veena” at IIT Delhi for computational resources.

References

  1. [1]A. Rycerz, J. Tworzydło, and C. Beenakker, Nat. Phys. 3, 172 (2007).
  2. [2]Y. Shkolnikov, E. De Poortere, E. Tutuc, and M. Shayegan, Phys. Rev. Lett. 89, 226805 (2002).
  3. [3]D. Xiao, W. Yao, and Q. Niu, Phys. Rev. Lett. 99, 236809 (2007).
  4. [4]J. R. Schaibley, H. Yu, G. Clark, P. Rivera, J. S. Ross, K. L. Seyler, W. Yao, and X. Xu, Nat. Rev. Mater. 1, 1 (2016).
  5. [5]O. Gunawan, Y. Shkolnikov, K. Vakili, T. Gokmen, E. De Poortere, and M. Shayegan, Phys. Rev. Lett. 97, 186404 (2006).
  6. [6]S. Sheoran and S. Bhattacharya, Phys. Rev. Mater. 7, 114003 (2023).
  7. [7]S. Sheoran, S. Monga, A. Phutela, and S. Bhattacharya, J. Phys. Chem. Lett. 14, 1494 (2023).
  8. [8]A. Srivastava, M. Sidler, A. V. Allain, D. S. Lembke, A. Kis, and A. Imamoglu, Nat. Phys. 11, 141 (2015).
  9. [9]W. Yao, D. Xiao, and Q. Niu, Phys. Rev. B 77, 235406 (2008).
  10. [10]D. MacNeill, C. Heikes, K. F. Mak, Z. Anderson, A. Kormányos, V. Zólyomi, J. Park, and D. C. Ralph, Phys. Rev. Lett. 114, 037401 (2015).
  11. [11]C. Zhao, T. Norden, P. Zhang, P. Zhao, Y. Cheng, F. Sun, J. P. Parry, P. Taheri, J. Wang, Y. Yang, et al., Nat. Nanotechnol. 12, 757 (2017).
  12. [12]M. Zeng, Y. Xiao, J. Liu, K. Yang, and L. Fu, Chem. Rev. 118, 6236 (2018).
  13. [13]S.-D. Guo, Y.-L. Tao, H.-T. Guo, Z.-Y. Zhao, B. Wang, G. Wang, and X. Wang, Phys. Rev. B 107, 054414 (2023).
  14. [14]W.-Y. Tong, S.-J. Gong, X. Wan, and C.-G. Duan, Nat. Commun. 7, 13612 (2016).
  15. [15]P. Zhao, Y. Dai, H. Wang, B. Huang, and Y. Ma, ChemPhysMater 1, 56 (2022).
  16. [16]R. Peng, Y. Ma, X. Xu, Z. He, B. Huang, and Y. Dai, Phys. Rev. B 102, 035412 (2020).
  17. [17]Q. Cui, Y. Zhu, J. Liang, P. Cui, and H. Yang, Phys. Rev. B 103, 085421 (2021).
  18. [18]H.-X. Cheng, J. Zhou, W. Ji, Y.-N. Zhang, and Y.-P. Feng, Phys. Rev. B 103, 125121 (2021).
  19. [19]M. Naguib, M. Kurtoglu, Y. Presser, J. Lu, J. Niu, M. Heon, L. Hultman, Y. Gogotsi, and M. W. Barsoum, Adv. Mater. 23, 4248 (2011).
  20. [20]M. Naguib, V. N. Mochalin, M. W. Barsoum, and Y. Gogotsi, Adv. Mater. 26, 992 (2014).
  21. [21]M. Naguib, M. W. Barsoum, and Y. Gogotsi, Adv. Mater. 33, 2103393 (2021).
  22. [22]M. Naguib, O. Mashtalir, J. Carle, V. Presser, J. Lu, L. Hultman, Y. Gogotsi, and M. W. Barsoum, ACS nano 6, 1322 (2012).
  23. [23]M. D. Firouzjaei, M. Karimzianari, H. Moradkhani, M. Elliott, and B. Anasori, Mxenes: The two-dimensional influencers (2022).
  24. [24]J. Jiang, S. Bai, J. Zou, S. Liu, J.-P. Hsu, N. Li, G. Zhu, Z. Zhuang, Q. Kang, and Y. Zhang, Nano Res. 15, 6551 (2022).
  25. [25]J. Lu, R. Liu, F. Yue, X. Zhao, G. Hu, X. Yuan, and J. Ren, J. Phys. Chem. Lett. 14, 132 (2022).
  26. [26]X. Feng, Z. He, R. Peng, Y. Dai, B. Huang, and Y. Ma, Phys. Rev. Mater. 6, 044001 (2022).
  27. [27]S. Li, J. He, L. Gracjaric, and P. Nachtigall, J. Mater. Chem. C 9, 11132 (2021).
  28. [28]P. Hohenberg and W. Kohn, Phys. Rev. 136, B864 (1964).
  29. [29]W. Kohn and L. J. Sham, Phys. Rev. 140, A1133 (1965).
  30. [30]G. Kresse and D. Joubert, Phys. Rev. B 59, 1758 (1999).
  31. [31]P. E. Blöchl, Phys. Rev. B 50, 17953 (1994).
  32. [32]G. Kresse and J. Furthmüller, Phys. Rev. B 54, 11169 (1996).
  33. [33]J. P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).
  34. [34]A. Rohrbach, J. Hafner, and G. Kresse, J. Phys.: Condens. Matter 15, 979 (2003).
  35. [35]S. L. Dudarev, G. A. Botton, S. Y. Savrasov, C. Humphreys, and A. P. Sutton, Phys. Rev. B 57, 1505 (1998).
  36. [36]L. Wang, T. Maxisch, and G. Ceder, Phys. Rev. B 73, 195107 (2006).
  37. [37]Z. He, R. Peng, X. Feng, X. Xu, Y. Dai, B. Huang, and Y. Ma, Phys. Rev. B 104, 075105 (2021).
  38. [38]J. Heyd, G. E. Scuseria, and M. Ernzerhof, J. Phys. Chem. Lett. 118, 8207 (2003).
  39. [39]S. Baroni, S. De Gironcoli, A. Dal Corso, and P. Gianozzi, Rev. Mod. Phys. 73, 515 (2001).
  40. [40]A. A. Mostofi, J. R. Yates, Y.-S. Lee, I. Souza, D. Vanderbilt, and N. Marzari, Comput. Phys. Commun. 178, 685 (2008).
  41. [41]J. He, P. Lyu, and P. Nachtigall, J. Mater. Chem. C 4, 11143 (2016).
  42. [42]S. Sheoran and S. Bhattacharya, Phys. Rev. B 109, L020404 (2024).
  43. [43]S. Halilov, A. Y. Perlov, P. Oppenner, A. Yaresko, and V. Antonov, Phys. Rev. B 57, 9557 (1998).
  44. [44]X. Feng, X. Xu, Z. He, R. Peng, Y. Dai, B. Huang, and Y. Ma, Phys. Rev. B 104, 075421 (2021).
  45. [45]Y. Li, Y. Wu, L. Deng, X. Yin, X. Han, F. Tian, and X. Zhang, J. Appl. Phys. 133 (2023).
  46. [46]J. Qi, X. Ji, L. Qi, Q. Niu, J. Feng, et al., Phys. Rev. B 92, 121403 (2015).
  47. [47]D. Zhong, K. L. Seyler, X. Linpeng, R. Cheng, N. Sivadas, B. Huang, E. Schmidgall, T. Tanguchi, K. Watanabe, M. A. McGuire, et al., Sci. Adv. 3, e1603113 (2017).
  48. [48]Z. Gao, Y. Wang, J. Gao, Z. Cui, X. Zhang, J. Shi, and X. Fan, Comput. Mater. Sci. 213, 111611 (2022).
  49. [49]X. Wang, R. Wu, D.-s. Wang, and A. Freeman, Phys. Rev. B 54, 61 (1996).
  50. [50]D. Dai, H. Xiang, and M.-H. Whangbo, J. Comput. Chem. 29, 2187 (2008).
  51. [51]D. J. Thouless, M. Kohmoto, M. P. Nightingale, and M. den Nijs, Phys. Rev. Lett. 49, 405 (1982).
  52. [52]S. Sheoran, A. Phutela, R. Moulik, and S. Bhattacharya, J. Phys. Chem. C (2023).
  53. [53]X. Xu, W. Yao, D. Xiao, and T. F. Heinz, Nat. Phys. 10, 343 (2014).
  54. [54]D. Xiao, M.-C. Chang, and Q. Niu, Rev. Mod. Phys. 82, 1959 (2010).
  55. [55]X. Hu, N. Mao, H. Wang, C. Niu, B. Huang, and Y. Dai, J. Mater. Chem. C 7, 9743 (2019).
  56. [56]C. Lei, Y. Ma, X. Xu, T. Zhang, B. Huang, and Y. Dai, J. Mater. Chem. C 12, 23089 (2019).
  57. [57]Y. Zang, Y. Ma, R. Peng, H. Wang, B. Huang, and Y. Dai, Nano Res. 14, 834 (2021).

Paper details

vlnc:W_vxfxcezq
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents