WorksPhysics and Astronomy
Anomalous scaling law for thermoelectric transport of 2D-confined electrons in an organic molecular system
Abstract
Confined electrons in low dimensions host desirable material functions for downscaled electronics as well as advanced energy technologies. Thermoelectricity is a most fascinating example, since the dimensionality modifies the electron density of states dramatically, leading to enhanced thermopower as experimentally examined in artificial two-dimensional (2D) structures. However, it is still an open question whether such an enhanced thermopower in low dimensions is realized in layered materials with strong 2D characters such as cuprates. Here, we report unusual enhancement of the thermopower in the layered organic compound -(BEDT-TTF)I, where BEDT-TTF stands for bis(ethylenedithio)-tetrathiafulvalene. We find that the slope in the Jonker plot (thermopower vs. logarithm of electrical conductivity ) for -(BEDT-TTF)I is significantly larger than that of conventional semiconductors. Moreover, the large slope is also seen in the related layered salt, demonstrating the impact of the 2D-confined carriers in the layered organics on thermoelectricity.
Introduction
Thermoelectricity, a fundamental property of solids to generate the electric field under the temperature gradient with the proportional coefficient known as the thermopower or the Seebeck coefficient as in an open circuit, offers a simple solid-state technology for the direct heat-to-electricity conversion, yet it is a very challenging issue to establish the guiding principles for the high-performance thermoelectrics [1, 2]. From a fundamental point of view, the semiclassical Boltzmann approach gives an approximate formula of the thermopower for a degenerate electron gas, which is well known as the Mott relation,
where is the Boltzmann constant, is the carrier charge, is the electrical conductivity, and is the chemical potential [3], signifying a close link to the energy dependence of the conductivity. Indeed, this relation underlies as a basal guideline for various schemes such as the band structure [4] and the mobility [5] engineering, in which the microscopic parameters in the conductivity formula such as the density of states (DOS) and the relaxation time are successfully controlled to increase the thermopower.
Among the various concepts based on the Mott relation, the reduced dimensionality is a straightforward and intriguing way as to adopt a step-like singularity in the DOS near the band edge. If the electron chemical potential is close to the edge, as in the case of a narrow-gap semiconductor, the energy derivative of the DOS is expected to diverge so as to afford extraordinarily large thermopower [6]. This theoretical proposal has motivated well-conceived transport measurements on the artificial systems such as the one-dimensional (1D) nanowires [7, 8] and the two-dimensional (2D) superlattices [9], leading to the experimental demonstration of the improved dimensionless figure of merit, , where is the thermal conductivity, although these observations seem to come from the phonon effect [7, 8, 10] rather than the proposed DOS modification. On the other hand, Ohta et al. presented unusually large thermopower emerged from the 2D electron gas (2DEG) in the oxide superlattice [11], indicating a 2D quantum confinement to vary the DOS. Moreover, such a 2DEG has also been realized at the surface of the three-dimensional (3D) compound-incorporated into the field-effect-transistor structure, in which a systematic evolution of the thermopower of the 2D-confined carriers is achieved by the gate voltage tuning [12, 13].
A key question subsequently arises: does such a drastic modification in DOS enhance thermopower in a bulk material with low dimensionality? Many of remarkable physical phenomena have been found as a result of the low-dimensional structures. Here, we focus on the charge transfer organic salt -(ET)I [ET being bis(ethylenedithio)-tetrathiafulvalene (BEDT-TTF)], in which the ET and the I anion layers are alternatingly stacked to form the 2D layered crystal structure as illustrated in Figure 1(a) [14]. This material exhibits a charge order transition at K [15, 16], which is driven by the inter-site Coulomb repulsion [17]. The two dimensionality in the charge order phase below is clearly evidenced by the anisotropy in the resistivity [18] as well as an occurrence of a Kosterlitz-Thouless transition at K [19]. In this study, we performed the electrical conductivity and the thermopower measurements on -(ET)I single crystals with a systematic evaluation of the sample dependence. The thermopower in the charge order phase is unusually large and incompatible with the conventional band picture, but is well scaled in the - plot, which is strikingly similar to that in the 2D-confined electrons realized in the oxide superlattices.
Figure 1. Schematic crystal structures of layered materials. (a) Layered organic salt -(ET)I consisting of planar BEDT-TTF (ET) molecules. The highest occupied molecular orbital (HOMO) of ET molecule is schematically drawn. The HOMO is spread along the direction normal to the molecular plane, leading to -stacked conducting layer with strong two-dimensional character. (b) Layered perovskite oxides ABO consisting of three-dimensional BO octahedra. Schematic orbital of BO octahedron is shown.
Experiments
Single crystals of -(ET)I were prepared by an electrochemical method. The crystal orientation was determined from the polarized infrared reflectivity spectra measured by using a Fourier transform infrared spectrometer [20]. The reresistivity and the thermopower were simultaneously measured by using a conventional four-probe method and a steady-state method, respectively [21, 22]. For the thermopower measurement, a manganin-constantan differential thermocouple was attached to the sample by using a carbon paste and the temperature gradient ( K/mm) was applied by using a resistive heater. The thermoelectric voltage from the wire leads was subtracted. The rate of temperature change is lower than 0.3 K/min to prevent the damage to the sample.
results and discussion
Resistivity
Figure 2(a) depicts the temperature dependence of the electrical resistivity of -(ET)I single crystals. All the samples exhibit the metal-insulator transition at K owing to the charge order. On the other hand, one may find the significant sample dependence in the magnitude of the resistivity shown in Figure 2(a). Although there is an inevitable ambiguity of the the sample size and the current path in the resistivity measurement in general, this sample dependence may also be intrinsic as observed in the thermopower. In the inset of Figure 2(a), we plot the temperature dependence of the normalized resistivity by the value at K. The in-plane anisotropy between the resistivity data measured for () and for () is clearly seen just above the transition temperature : while exhibits a gradual decrease on heating, shows a minimum structure near K, which has also been observed in the earlier study [18]. This in-plane resistive anisotropy may originate from the charge-disproportionation fluctuations existing even in the high-temperature phase [23]:
Figure 2. Transport properties of -(ET)I single crystals. (a), Temperature dependence of the resistivity , and (b), the thermopower for five single crystals. The direction of the electrical current density and the temperature gradient is for the samples #1, #2, #3 (red) and for the samples #4, #5 (blue). The thermopower data below 110 K is fluctuating owing to high resistance at low temperatures. Insets: (a) The normalized resistivity near the charge order transition temperature K. (b) The thermopower in the high-temperature regime.
the stripe-type charge order along the axis [24, 25] may induce a smooth charge flow along the same direction but form strong potential barriers along the -axis direction to suppress the conduction.
Thermopower
Figures 2(b) displays the temperature dependence of the thermopower . The overall behavior of the thermopower is similar to earlier results that reported this material for the first time [14]: the thermopower is positive and relatively small value as expected in the metallic state, while it changes its sign and shows the large absolute value in the insulating phase. This behavior is also qualitatively consistent with the temperature dependence of the Hall coefficient [18]. On the other hand, the detailed nature of the thermopower has been discussed in the first report [14], in which the thermopower was given as evidence for the metal-insulator transition at . We also note that the thermopower of -(ET)I has been intensively studied to investigate the exotic Dirac-like electronic states driven by pressure [26, 27].
The observed sample dependence of the transport properties may originate from the disorder effect, which is suggested to be intrinsic in this material. This is experimentally evidenced by the relaxor-type dielectric response [18, 28] in sharp contrast to the 1D charge order salts [29] and the negative magnetoresistance in the charge order phase possibly due to the weak localization [18]. Although it requires detailed future study, the origin of disorders may stem from the anions layer [18]: the I anions are still chemically reactive as an oxidant in the crystal. The transition temperature is, nevertheless, little affected, showing the cohesive properties in the conduction layers are substantially retained. Such a disorder effect, however, should affect on the transport properties seriously [30]. In addition, the high-temperature phase of -(ET)I above is semimetallic, consisting of small number of electrons and holes () with high mobility (), where and are the carrier density and the mobility of the electrons (holes), respectively [18]. In this case, the thermopower is weighted by the conductivity of each carrier as , where and are the conductivity and the thermopower of electrons (holes), respectively. Hence, the thermopower should be quite sensitive to the balance of the contributions from electrons and holes; the predominant carrier in the semimetallic state above is hole as also indicated from the Hall coefficient [18], but the aforementioned disorder may influence the delicate balanced carrier density and mobility, resulting in the sample-dependent thermopower as seen in the inset of Figure 2(b).
Jonker analysis
To explore the universality among the strongly sample-dependent transport properties, we employ the thermopower plotted as a function of the logarithm of the electrical conductivity , known as the Jonker plot [31], in Figure 3(a). Quite interestingly, although the resistivity and the thermopower are sample-dependent as mentioned, the slope of the -log plot in the insulating phase seems to be nearly equal among the measured samples as guided by the dotted lines. Note that, in the semiconductors with the thermal activation energy gap of , the electrical conductivity and the thermopower are expressed as and , respectively ( being a constant), leading to a relationship between and as
Figure 3. Jonker plot. (a), The thermopower as a function of the conductivity in the single logarithmic plot for five single crystals of α-(ET)I. In conventional semiconductors, the slope of 200 V/K is expected. On the other hand, unusual value of the slope of 700 V/K has been observed in the charge order phase of α-(ET)I in common. The dotted lines are a guide to show the slope of 700 V/K for the low-temperature data. (b), The Jonker plot for various layered materials including charge-order insulator α-(ET)I (present study), dimer-Mott insulator β′-(ET)AuCl [36, 37], cuprates [33], layered Mott insulator CaRuO [34], and layered spin-orbit Mott insulator SrIrO [35]. The vertical axis shows the magnitude of the thermopower. The horizontal axis is the electrical conductivity (or the carrier density ) normalized by the horizontal intercept (or ) of the slope line for each compound. The dashed and dotted lines represent the values of the slope of −200 V/K and −700 V/K, respectively.
and hence the magnitude of the slope becomes a universal value of (), which well holds in several conventional semiconductors [32]. On the other hand, the slope of the - plot in the insulating phase of -(ET)I is about in common, which is much larger than the conventional value of , indicating an unusual mechanism to enhance the thermopower operating in -(ET)I. Note that the intersection of the dotted line to in Figure 3(a), which corresponds to in Eq. (2), is sample-dependent. This is consistent with the presence of the sample-dependent disorder, since the impurity concentration is generally included in . (The error of the sample size in determination of the resistivity could also be involved in this horizontal intercept.)
The origin of the enhanced thermopower in -(ET)I is most crucial. The two-carrier effect is excluded because it generally induces the cancellation of the thermopower. Moreover, the temperature dependence of the mobility is also unlikely, since temperature variations of the resistivity and the Hall coefficient are fairly scaled in the insulating phase [18]. On the other hand, large slope in the Jonker plot has been reported in the 2DEG realized in the oxide superlattice and disdiscussed in terms of the modified DOS for the 2D-confined electrons: while the series of the 3D doped SrTiO bulk samples exhibits the conventional value of the slope of 200 V/K in the Jonker plot, the 2D SrTiO superlattice yields a large value of the slope of 1000 V/K [11]. The remarkable resemblance to the present results evidently suggests a similar modification of the DOS acting for the correlated electrons confined in the 2D layers of α-(ET)I. Although the conventional band picture is not applicable to the present charge order system with strong electron correlation, we speculate that the edge of the DOS, where the carriers are thermally excited, may show a steep change as a function of energy owing to the two dimensionality, leading to the enhanced thermopower. This effect can be enhanced by the in-plane anisotropy, or pseudo-1D character at the bottom of the upper band (electron carriers), as pointed out by the calculations [30].
Comparison with other 2D systems
It is interesting to compare the present system with the other correlated layered systems. Figure 3(b) depicts the Jonker plot for various layered materials including cuprates [33], layered Mott insulator CaRuO [34], and layered spin-orbit Mott insulator SrIrO [35], scaled with the normalized electrical conductivity (or the carrier density ) by the horizontal intercept (or ) of the slope line for each compound. The Jonker plot for the layered oxides shows a conventional slope value of 200 V/K. Contrastingly, we find that the data of layered organic dimer-Mott insulator β′-(ET)AuCl, the resistivity and thermopower of which are respectively extracted from Refs. 36 and 37, exhibits anomalously large slope similarly to α-(ET)I. This unique behavior in the layered organic salts may stem from the highly anisotropic nature of the molecular orbitals [Fig. 1(a)]: the -lobes of the ET molecules spread along the in-plane directions strengthen the 2D nature, while the typical layered oxides such as the layered perovskite ABO are composed of rather 3D units of octahedra BO [Fig. 1(b)].
The prominent two dimensionality in organics is clearly seen in the resistivity anisotropy ( and being the resistivity measured for the out-of-plane and the in-plane directions, respectively). In the insulating phase of α-(ET)I, it yields [18]. This is significantly larger than that of layered oxide insulators. For instance, while the anisotropy in the 2D correlated metal SrRuO is as large as owing to the 2D cylindrical Fermi surface [38], it becomes almost unity in the isolavant 2D Mott insulator CaRuO [39]. The anisotropy also decreases near the Mott insulating phase of the cuprates so that the system becomes less two dimensional [40]. Thus, the present study serves a fascinating playground to examine the thermoelectricity of the 2D-confined correlated electrons in the bulk organic compounds, opening up a particular route to apply the low-dimensional organic thermoelectrics. It is noteworthy that the charge glass organic systems exhibit a large resistive anisotropy of at low temperatures [41]. Also, the 1D organic conductor exhibits a colossal thermopower [42], in which the low dimensionality should be essential.
summary
To summarize, we have systematically measured the electrical resistivity and the thermopower of -(ET)I single crystals. Although the transport properties are sample-dependent, the thermopower is well scaled as a function of the conductivity in the Jonker plot. Importantly, the slope of the - plot in the insulating phase is unusually larger than that in conventional semiconductors, indicating 2D-confined correlated carriers to enhance the thermopower.
Acknowledgments
We thank M. Ogoshi for experimental assistance of the infrared spectroscopy measurement. This work was supported by JSPS KAKENHI Grants No. 18K13504.
References
References
- [1]G. J. Snyder and E. S. Toberer, Complex thermoelectric materials. Nat. Mater. 7, 105 (2008).
- [2]J. He and T. M. Tritt, Advances in thermoelectric materials research: Looking back and moving forward. Science 357, eaek9997 (2017).DOI
- [3]K. Behnia, Fundamentals of Thermoelectricity. Oxford University Press (2015).DOI
- [4]Y. Pei, X. Shi, A. LaLonde, H. Wang, L. Chen, and G. J. Snyder, Convergence of electronic bands for high performance bulk thermoelectrics. Nature 473, 66-69 (2011).DOI
- [5]P. Sun, B. Wei, J. Zhang, J. M. Tomczak, A. M. Strydom, M. Søndergaard, B. B. Iversen, and F. Steglich, Large Seebeck effect by charge-mobility engineering. Nat. Commun. 6, 7475 (2015).DOI
- [6]L. D. Hicks and M. S. Dresselhaus, The effect of quantum well structures on the thermoelectric figure of merit. Phys. Rev. B 47, 12727-12731 (1993).
- [7]A. I. Hochbaum, R. Chen, R. D. Delgado, W. Liang, E. C. Garnett, M. Najarian, A. Majumdar, and P. Yang, Enhanced thermoelectric performance of rough silicon nanowires. Nature 451, 163-167 (2008).
- [8]A. I. Boukai, Y. Bunimovich, J. Tahir-Kheli, J.-K. Yu, W. A. Goddard III, and J. R. Heath, Silicon nanowires as efficient thermoelectric materials. Nature 451, 168-171 (2008).
- [9]R. Venkatasubramanian, E. Siivola, T. Colpitts, and B. O’Quinn, Thin-film thermoelectric devices with high room-temperature figures of merit. Nature 413, 597-602 (2001).
- [10]R. Venkatasubramanian, Lattice thermal conductivity reduction and phonon localizationlike behavior in superlattice structures. Phys. Rev. B 61, 3091 (2000).DOI
- [11]H. Ohta, S. Kim, Y. Mune, T. Mizoguchi, K. Nomura, S. Ohta, T. Nomura, Y. Nakanishi, Y. Ikuhara, M. Hirano, H. Hosono, and K. Koumoto, Giant thermoelectric Seebeck coefficient of a two-dimensional electron gas in SrTiO3. Nat. Mater. 6, 129-134 (2007).pubmed.ncbi.nlm.nih.gov/17237790
- [12]H. Ohta, T. Mizuno, S. Zheng, T. Kato, Y. Ikuhara, K. Abe, H. Kumomi, K. Nomura, and H. Hosono, Unusually Large Enhancement of Thermopower in an Electric Field Induced Two-Dimensional Electron Gas. Adv. Mater. 24, 740 (2012).DOI
- [13]S. Shimizu, M. S. Bahramy, T. Iizuka, S. Ono, K. Miwa, Y. Tokura, and Y. Iwasa, Enhanced thermopower in ZnO two-dimensional electron gas. Proc. Natl. Acad. Sci. USA 113, 6438 (2016).DOI
- [14]K. Bender, I. Hennig, D. Schweitzer, K. Dietz, H. Endres, and H. J. Keller, Synthesis, Structure and Physical Properties of a Two-Dimensional Organic Metal, Di[bis(ethylethio)tetra-thiofulvalene] triiodide, (BEDT-TTF)₂I₃. Mol. Cryst. Liq. Cryst. 108, 359 (1984).
- [15]Y. Takano, K. Hiraki, H. Yamamoto, T. Nakamura, and T. Takahashi, Charge disproportionation in the organic conductor, α-(BEDT-TTF)₂I₃. J. Phys. Chem. Solids 62, 393 (2001).
- [16]T. Kakiuchi, K. Wakabayashi, H. Sawa, T. Takahashi, and T. Nakamura, Charge Ordering in α-(BEDT-TTF)₂I₃ by Synchrotron X-ray Diffraction. J. Phys. Soc. Jpn. 76, 113702 (2007).
- [17]H. Seo, J. Merino, H. Yoshioka, and M. Ogata, Theoretical Aspects of Charge Ordering in Molecular Conductors. J. Phys. Soc. Jpn. 75, 051009 (2006).DOI
- [18]T. Ivek, M. Čulo, M. Kužević, E. Tutiš, M. Basletić, B. Mihaljević, E. Tafra, S. Tomić, A. Löhle, M. Dressel, D. Schweitzer, and B. Korin-Hamzić, Semimetallic and charge-ordered α-(BEDT-TTF)₂I₃: On the role of disorder in dc transport and dielectric properties. Phys. Rev. B 96, 075141 (2017).
- [19]S. Uji, K. Kodama, K. Sugii, Y. Takahide, T. Terashima, N. Kurita, S. Tsuchiya, M. Kohno, M. Kimata, K. Yamamoto, and K. Yakushi, Kosterlitz-Thouless-Type Transition in a Charge Ordered State of the Layered Organic Conductor α-(BEDT-TTF)₂I₃. Phys. Rev. Lett. 110, 196602 (2013).
- [20]M. Meneghetti, R. Bozio, and C. Pecile, Electron-molecular vibration coupling in 2-D organic conductors: high and low temperature phases of α-(BEDT-TTF)₂I₃. Journal de Physique 47, 1377 (1986).DOI
- [21]H. Takahashi, R. Okazaki, S. Ishiwata, H. Taniguchi, A. Okutani, M. Hagiwara, and I. Terasaki, Colossal Seebeck effect enhanced by quasi-ballistic phonons dragging massive electrons in FeSb₂. Nat. Commun. 7, 12732 (2016).DOI
- [22]T. Yamanaka, R. Okazaki, and H. Yaguchi, Enhanced Seebeck coefficient through magnetic fluctuations in Sr₂Ru₁₋ₓMₓO₄ (M = Co, Mn). Phys. Rev. B 105, 184507 (2022).DOI
- [23]Y. Yue, K. Yamamoto, M. Uruichi, C. Nakano, K. Yakushi, S. Yamada, T. Heijima, and A. Kawamoto, Nonuniform site-charge distribution and fluctuations of charge order in the metallic state of α-(BEDT-TTF)₂I₃. Phys. Rev. B 82, 075134 (2010).
- [24]T. Takahashi, Y. Nogami, and K. Yakushi, Charge Ordering in Organic Conductors. J. Phys. Soc. Jpn. 75, 051008 (2006).
- [25]K. Katono, T. Taniguchi, K. Ichimura, Y. Kawashima, S. Tanda, and K. Yamamoto, STM observation of charge stripe in metallic phase of α-(BEDT-TTF)₂I₃. Phys. Rev. B 91, 125110 (2015).
- [26]T. Konoike, M. Sato, K. Uchida, and T. Osada, Anomalous Thermoelectric Transport and Giant Nernst Effect in Multilayered Massless Dirac Fermion System. J. Phys. Soc. Jpn. 82, 073601 (2013).DOI
- [27]M. Monteverde, M. O. Goerbig, P. Auban-Senzier, F. Navarin, H. Henck, C. R. Pasquier, C. Mézière, and P. Batail, Coexis- tence of Dirac and massive carriers in α-(BEDT-TTF)₂I₃ under hydrostatic pressure. Phys. Rev. B 87, 245110 (2013).
- [28]P. Lunkenheimer, B. Hartmann, M. Lang, J. Müller, D. Schweitzer, S. Krohns, and A. Loidl, Ferroelectric properties of charge-ordered α-(BEDT-TTF)₂I₃. Phys. Rev. B 91, 245132 (2015).DOI
- [29]F. Nad, P. Monceau, C. Carcel, and J. M. Fabre, Charge ordering phase transition in the quasi-one-dimensional conductor (TMTTF)₂AsF₆. J. Phys.: Condens. Matter 12, L435 (2000).DOI
- [30]P. Alemany, J.-P. Pouget, and E. Canadell, Essential role of anions in the charge ordering transition of α-(BEDT-TTF)₂I₃. Phys. Rev. B 85, 195118 (2012).DOI
- [31]G. H. Jonker, Application of combined conductivity and Seebeck-effect plots for analysis of semiconductor properties. Phil. Res. Rep. 23, 131-138 (1968).
- [32]H. Muta, T. Kanemitsu, K. Kurosaki, and S. Yamanaka, High-temperature thermoelectric properties of Nb-doped MnNiSn (M = Ti, Zr) half-Heusler compound. J. Alloys Comp. 469, 50-55 (2009).DOI
- [33]S. D. Obertelli, J. R. Cooper, and J. L. Tallon, Systematics in the thermoelectric power of high-Tc oxides. Phys. Rev. B 46, 14928(R) (1992).pubmed.ncbi.nlm.nih.gov/10003604
- [34]Y. Nishina, R. Okazaki, Y. Yasui, F. Nakamura, and I. Terasaki, Anomalous Thermoelectric Response in an Orbital-Ordered Oxide Near and Far from Equilibrium. J. Phys. Soc. Jpn. 86, 093707 (2017).DOI
- [35]I. Pallecchi, M. T. Buscaglia, V. Buscaglia, E. Giglioli, G. Lamura, F. Telesio, M. R. Cimberle, and D .Marré, Thermoelectric behavior of Ruddlesden-Popper series iridates. J. Phys.: Condens. Matter 28, 065601 (2016).DOI
- [36]H. Taniguchi, M. Miyashita, K. Uchiyama, R. Sato, Y. Ishii, K. Satoh, N. Môri, M. Hedo, and Y. Uwatoko, High-Pressure Study up to 9.9 GPa of Organic Mott Insulator, β′-(BEDT-TTF)₂AuCl₄·2H₂O. Phys. Soc. Jpn. 74, 1370-1373 (2005).
- [37]Y. Kiyota, T. Kawamoto, H. Mori, and T. Mori, The thermoelectric power of band-filling controlled organic conductors, β′-(BEDT-TTF)₃(CoCl₄)₂₋ₓ(GaCl₄)ₓ. J. Mater. Chem. A 6, 2004 (2018).
- [38]K. Yoshida, F. Nakamura, T. Goko, T. Fujita, Y. Maeno, Y. Mori, and S. Nishizaki, Electronic crossover in the highly anisotropic normal state of Sr₂RuO₄ from pressure effects on electrical resistivity. Phys. Rev. B 58, 15062 (1998).
- [39]F. Nakamura, T. Goko, M. Ito, T. Fujita, S. Nakatsuji, H. Fukazawa, Y. Maeno, P. Alireza, D. Forsythe, and S. R. Julian, From Mott insulator to ferromagnetic metal: A pressure study of Ca₂RuO₄. Phys. Rev. B 65, 220402(R) (2002).DOI
- [40]S. Komiya, Y. Ando, X. F. Sun, and A. N. Lavrov, c-axis transport and resistivity anisotropy of lightly to moderately doped La₂₋ₓSrₓCuO₄ single crystals: Implications on the charge transport mechanism. Phys. Rev. B 65, 214535 (2002).DOI
- [41]T. Sato, K. Miyagawa, M. Tamura, and K. Kanoda, Anomalous 2D-Confined Electronic Transport in Layered Organic Charge-Glass Systems. Phys. Rev. Lett. 125, 146601 (2020).DOI
- [42]Y. Machida, X. Lin, W. Kang, K. Izawa, and K. Behnia, Colossal Seebeck Coefficient of Hopping Electrons in (TMTSF)₂PF₆. Phys. Rev. Lett. 116, 087003 (2016).


