betaFeedback

WorksComputer Science

A monolithic Finite Element formulation for the hydroelastic analysis of Very Large Floating Structures

Abstract

In this work we present a novel monolithic Finite Element Method (FEM) for the hydroelastic analysis of Very Large Floating Structures (VLFS) with arbitrary shapes that is stable, energy conserving and overcomes the need of an iterative algorithm. The new formulation enables a fully monolithic solution of the linear free-surface flow, described by linear potential flow, coupled with floating thin structures, described by the Euler-Bernoulli beam or Poisson-Kirchhoff plate equations. The formulation presented in this work is general in the sense that solutions can be found in the frequency and time domains, it overcomes the need of using elements with C1 continuity by employing a continuous/discontinuous Galerkin (C/DG) approach, and it is suitable for Finite Elements of arbitrary order. We show that the proposed approach can accurately describe the hydroelastic phenomena of VLFS with a variety of tests, including structures with elastic joints, variable bathymetry and arbitrary structural shapes.

Introduction

Floating offshore structures are of great interest for many applications. A particular type of floating structures are the so called Very Large Floating Structures (VLFS). One can find several examples of VLFS [50], such as floating airports [24, 55], floating breakwaters [37, 11], floating solar energy installations [46, 42], or even futuristic floating modular cities [45, 14]. The study of the behavior of VLFS is, therefore, relevant for a wide variety of industries and scientific disciplines. One of the main characteristics of VLFS is that the overall structural stiffness is relatively low, behaving like elastic thin plates. In addition, due to their large dimensions, the incoming waves are typically relatively short compared with the structure length. Thus, due to the low stiffness combined with short incoming waves, the response of VLFS is governed by a strong coupling between inertial, hydrodynamic and elastic responses, what is known as hydroelastic response.

The study of hydroelastic phenomena entails several challenges, namely the strong coupling between the elastic deformation of the structure and its hydrodynamic response, the analysis of the structural response under the effect of nonlinear waves, the characterization of the behavior of finite structures or the nonlinear interaction between flow and structure, see [31]. During the last decades, several techniques have been developed to analyse hydroelastic phenomena for VLFS under the effect of waves. We refer the reader to [10] for an in depth review on different methods used for the hydroelastic analysis of VLFS. Some studies have been carried out based on experimental analysis of floating elastic platforms, see for instance [53, 33, 43]. However, experimental studies are limited in terms of structural size and wave conditions. Other studies are based on analytical or semi-analytical approaches, see [47, 39, 2, 3, 52], where the fundamental behaviour of floating elastic structures is assessed, assuming infinite or finite floating platforms with regular shapes. Again, analytical approaches are limited to the study of VLFS with regular shapes, e.g. rectangular or circular platforms. Hence, the use of numerical techniques is essential for the analysis of the hydroelastic behavior of VLFS of finite size with irregular shapes and subject to a variety of wave input conditions.

One of the most popular numerical approaches for the hydroelastic analysis of VLFS relies on the mode expansion framework for linear potential flow theory, based on the Boundary Element Method. Assuming a negligible structure _footer: O. Colomés et al.: *Preprint submitted to Elsevier draft, this approach models the effect of the structure by a pressure distribution on the free surface. The dynamic pressure distribution is approximated by a set of panels with different accuracies, e.g. piece-wise constant, linear, quadratic or cubic, see [35, 54, 23, 27]. Most of the works based on the panel method, or mode expansion, assume regular shaped structures. For the analysis of irregular shaped VLFS, the Finite Element Method (FEM) becomes predominant in the literature due to its suitability to model the structural behaviour of arbitrary shaped platforms. Some works have developed a coupling strategy between BEM and FEM frameworks, see for instance [22, 23, 49, 44, 40].

The study of the hydroelastic phenomena in VLFS can be done in either the frequency domain or the time domain. The former assumes a linear response of the transient effects described as a time-harmonic motion, see for instance [26, 34, 16]. The time-domain analysis avoids the linear assumption, making it a suitable approach for the analysis of steep wave fronts and cases with highly nonlinear effects, [33, 25]. In this work we develop a formulation that is suitable for both approaches, frequency and time domain.

VLFS hydroelasticity is inherently a Fluid-Structure Interaction (FSI) problem, that is a fluid flow problem coupled with a structural elasticity problem. There are two main frameworks that can be used to solve this type of problems: a monolithic approach, where a unified set of coupled governing equations are solved, and a partitioned approach, where the equations for the fluid and for the structure are solved separately and a coupling strategy is used to ensure compatibility between the two solutions. One coupling strategy that can be used for a partitioned scheme is a weak coupling (also called a staggered scheme) strategy. Here, a new fluid solution is solved using the structural displacement of the previous time step. While the obtained fluid solution is used to determine the loading on the structure. One of the advantages of partitioned schemes is that, if the software is available separately for the flow and structural deformation, one can reuse them and just develop an interface that exchanges the coupling variables. However, stable behavior of this coupling method is not guaranteed due to the added-mass effect [9]. In case of incompressible fluids, selecting a smaller time step does not resolve this problem [8].

Alternatively, one could use a strong coupling strategy, where the compatibility conditions are enforced simultaneously. This is done by iteratively solving fluid and structural updates until convergence is achieved. For a strongly coupled the aforementioned instabilities due to added-mass effect can be avoided by using sufficient relaxation in the iteration procedure. However, this may lead to excessive iterations even if the two separate problems are linear, see for instance [32, 30, 51]. Otherwise, monolithic approaches are stable and do not require additional iterations to resolve the coupling. Mayor drawback is the fact that ad hoc software has to be developed in case it is not available for the coupled problem at hand. A particular feature of monolithic VLFS simulations is that they lead to a mixed-dimensional problem, i.e. a problem described by a system of Partial Differential Equations (PDEs) defined in domains of different topological dimension. The solution of mixed-dimensional PDEs in a FEM framework presents an additional challenge, related to the coupling of Finite Element (FE) spaces defined in different dimensions, see [15].

In this work we present a novel monolithic FEM framework for the hydroelastic analysis of VLFS with arbitrary shapes that is stable, energy conserving and overcomes the need of an iterative algorithm. The formulation is based on the monolithic FEM approach proposed by Akkerman et al. [1] for linear free-surface potential flow, which is here extended to floating structures modeled as Euler-Bernoulli beams or Poisson-Kirchhoff plates. Moreover, the formulation presented in this manuscript is general in the sense that solutions can be found in the frequency and time domains. In addition, the proposed formulation overcomes the need of using elements with C1C^1 continuity, i.e. continuity of rotations on the element boundaries, by using a continuous/discontinuous Galerkin (C/DG) approach formulated in [18]. Note that we restrict this manuscript to the analysis of linear problems, i.e. linear potential flow coupled with linear Euler-Bernoulli/Poisson-Kirchhoff structural formulations. However, the framework would still hold for nonlinear potential flow theory and/or nonlinear structural models. For the sake of completeness, in this manuscript we focus on a detailed analysis of the formulation for linear problems, keeping its extension to nonlinear problems as a future work.

The manuscript is organized as follows: in § 2 we describe the problem setting, with the definition of the governing equations for the fluid, structure in two and three-dimensional cases, as well as the coupling conditions. In § 3 we develop the novel monolithic formulation for VLFS for the most general case, i.e. a floating Poisson-Kirchhoff plate in a three-dimensional domain, giving the expression of the fully discrete problem for both, frequency and time domains. § 4 is dedicated to the numerical analysis of the method, where we prove consistency, energy conservation, stability and convergence statements. The numerical results are shown in § 5, where we analyse the behavior of the method for a variety of cases in two and three dimensions and for the frequency and time domains. The final conclusions are given in § 8.

Problem setting

Let us consider a thin structure floating in a fluid. We denote the fluid domain as Ω\Omega, bounded by the bottom surface, Γb\Gamma_b, the inlet surface, Γin\Gamma_{\mathrm{in}}, the outlet surface, Γout\Gamma_{\mathrm{out}}, the free surface, Γfs\Gamma_{\mathrm{fs}}, and the interface with the floating structure, Γstr\Gamma_{\mathrm{str}}. The floating structure is bounded by δΓstr≡Λfs,str\delta\Gamma_{\mathrm{str}} \equiv\Lambda_{\mathrm{fs,str}}, a set of entities of dimension d−2d-2 with dd the topological dimension of Ω\Omega. We might also consider the case in which the structure has a set of internal joints with different structural properties, denoted as Λj\Lambda_j. The geometry of the idealized problem is given in Figure 1. We use n\mathbf{n} for the normal vector

Sketch with the definition of the geometrical entities

Figure 1. Sketch with the definition of the geometrical entities.

to the surface, while nΛ\mathbf{n}_{\Lambda} to indicate the normal to the joint on the structure plane. Note also that the normal nΛ\mathbf{n}_{\Lambda} appears naturally in the formulation when integrating by parts on the structural domain, see § 3.1.

Let us also consider the following assumptions:

Assumption 1. The fluid in Ω\Omega is inviscid, incompressible and irrotational and can be described well by (linear) potential flow. We also assume that there is no cavitation, i.e. detachment of the structure with respect to the fluid.

Assumption 2. The incoming waves have a small steepness and can be well described well by (linear) Airy wave theory.

Assumption 3. The floating structures are thin and can be modeled by the linear Euler-Bernoulli equations in the case of a 2-dimensional domain and by the linear Poisson-Kirchhoff theory for the 3-dimensional domain.

Linear potential flow theory

Let us denote the fluid velocity as u:Ω→Rd\mathbf{u}:\Omega\to\mathbb{R}^{d}. From the incompressibility condition assumed in Assumption 1, we know that

∇⋅u=0in Ω.(1)\nabla\cdot\mathbf{u}=0 \quad\text{in }\Omega. \tag*{(1)}

We also know that for an inviscid and irrotational flow, there exists a potential field, ϕ:Ω→R\phi:\Omega\to\mathbb{R}, that satisfies

u=∇ϕ.(2)\mathbf{u}=\nabla\phi. \tag*{(2)}

Combining equations (1) and (2), we reach the governing equation for a potential flow:

Δϕ=0in Ω.(3)\Delta\phi=0 \quad\text{in }\Omega. \tag*{(3)}

Equation (3) is supplemented with the appropriate boundary and interface conditions. Before detailing such conditions, we introduce some notation. Let us denote by η\eta the surface elevation with respect to the surface of the fluid at rest, and by n\mathbf{n} the normal vector to any surface pointing outwards, see Figure 1. We also use the notation (⋅)t(\cdot)_t and (⋅)tt(\cdot)_{tt} for the first and second order time derivative. Using this notation, the kinematic boundary conditions are given by

n⋅∇ϕ=0on Γb,(4)\mathbf{n}\cdot\nabla\phi=0 \quad\text{on }\Gamma_b, \tag*{(4)}
n⋅∇ϕ=uinon Γin,(5)\mathbf{n}\cdot\nabla\phi=u_{\mathrm{in}}\quad\text{on }\Gamma_{\mathrm{in}}, \tag*{(5)}
n⋅∇ϕ=uouton Γout,(6)\mathbf{n}\cdot\nabla\phi=u_{\mathrm{out}}\quad\text{on }\Gamma_{\mathrm{out}}, \tag*{(6)}
n⋅∇ϕ=ηton Γfs∪Γstr.(7)\mathbf{n}\cdot\nabla\phi=\eta_t\quad\text{on }\Gamma_{\mathrm{fs}}\cup\Gamma_{\mathrm{str}}. \tag*{(7)}

Equation (4a) is enforcing a no penetration boundary condition, where the velocity normal to the boundary is zero. In equations (4b) and (4c) we enforce a prescribed inlet and outlet normal velocities, uinu_{\mathrm{in}} and uoutu_{\mathrm{out}}, respectively. At the free surface and at the beam interface, equation (4d), we enforce that the time derivative of the fluid surface is equal to the normal component of the velocity. Note that this last condition is only valid under Assumption 2, where due to small wave steepness the normal component of the velocity is well approximated by the vertical velocity component. When this assumption is not valid, equation (4d) should be replaced by ϕz−∇ϕ∇η=ηt\phi_z-\nabla\phi\nabla\eta=\eta_t, where ϕz\phi_z is the directional derivative of ϕ\phi in the vertical direction.

In addition, the fluid satisfies the dynamic boundary conditions at the free surface and at the interface between the fluid and the structure. This condition is given by the Bernoulli’s equation for pressure in a potential flow, which at the free surface and interface boundary reads

p=−ρwϕt−gρwη−12(∇ϕ)2on Γfs∪Γstr.(8)p=-\rho_w\phi_t-g\rho_w\eta-\frac{1}{2}(\nabla\phi)^2\quad\text{on }\Gamma_{\mathrm{fs}}\cup\Gamma_{\mathrm{str}}. \tag*{(8)}

Where pp is the pressure, ρw\rho_w the fluid density and g=9.81g=9.81 m/s2^2 the gravity acceleration. Under Assumption 2, the quadratic terms in equation (5) can be neglected, leading to the linearized condition

p=−ρwϕt−gρwηon Γfs∪Γstr.(9)p=-\rho_w\phi_t-g\rho_w\eta\quad\text{on }\Gamma_{\mathrm{fs}}\cup\Gamma_{\mathrm{str}}. \tag*{(9)}

At the free surface, we enforce that the pressure is equal to the atmospheric pressure, which we assume to be zero, i.e. p=pa=0p=p_a=0. At the fluid-structure interface, the pressure is in equilibrium with the structure dynamics. Using Assumption 3, i.e. no cavitation and thin beam/plate theories, the structural motion is governed either by the Euler-Bernoulli equation form beams or the Poisson-Kirchoff plate theory. In what follows we describe the two cases.

Euler-Bernoulli beam theory

We start by defining the 2-dimensional case, where the floating structure is modeled as a 1-dimensional Euler-Bernoulli beam. In that case, we have that the surface elevation η:Γstr→R\eta:\Gamma_{\mathrm{str}}\to\mathbb{R}, which from Assumption 3 is equivalent to the beam deflection, satisfies

ρbhbηtt+DΔ2η=pon Γstr.(10)\rho_bh_b\eta_{tt}+D\Delta^2\eta=p\quad\text{on }\Gamma_{\mathrm{str}}. \tag*{(10)}

With ρb\rho_b the structure density, hbh_b the structure thickness and DD the structural rigidity, given in terms of the Young modulus EE and the moment of inertia as D≔EI=Ehb3/12D\coloneqq EI=Eh_b^3/12. Here, DD is assumed to be constant. Adding equations (6) and (7) together and using the fact that the atmospheric pressure is zero at the free surface, we have that the potential field and the fluid surface elevation satisfy the following conditions at the fluid free surface and fluid-structure interface

ϕt+gη=0on Γfs,(11)\phi_t+g\eta=0\quad\text{on }\Gamma_{\mathrm{fs}}, \tag*{(11)}
d0ηtt+DρΔ2η+ϕt+gη=0on Γstr.(12)d_0\eta_{tt}+D_\rho\Delta^2\eta+\phi_t+g\eta=0\quad\text{on }\Gamma_{\mathrm{str}}. \tag*{(12)}

Where d0≔ρbhbρwd_0\coloneqq\frac{\rho_bh_b}{\rho_w} is the draft (submerged section) of the structure and Dρ≔DρwD_\rho\coloneqq\frac{D}{\rho_w}. Equation (3) together with the kinematic boundary conditions given in (4) and the dynamic boundary conditions given in (8), define the systems of equations that will be analysed in subsequent sections.

In addition, we consider that the structure is allowed to have free motion at the boundaries, i.e. zero moment, M≔DΔη=0M\coloneqq D\Delta\eta=0, and shear V≔∇(DΔη)⋅nΛ=0V\coloneqq\nabla(D\Delta\eta)\cdot\mathbf{n}_{\Lambda}=0. We also assume that in the case of having joints, these will act as linear rotational springs, meaning that the mean moment at the join will depend linearly on the relative rotation angle, with a spring constant of κϕ\kappa_\phi. Since there are not any external point moment or shear force applied to the joint, the shear and moment will be continuous at these points. These conditions can be summarized as

DΔη=0on Λfs,str,(13)D\Delta\eta=0\quad\text{on }\Lambda_{\mathrm{fs,str}}, \tag*{(13)}
∇(DΔη)⋅nΛ=0on Λfs,str,(14)\nabla(D\Delta\eta)\cdot\mathbf{n}_{\Lambda}=0 \quad\text{on }\Lambda_{\mathrm{fs,str}}, \tag*{(14)}
⟨DΔη⟩=−kφ[[∇η⋅nΛ]]on Λj,(15)\langle D\Delta\eta\rangle=-k_{\varphi}[[\nabla\eta\cdot\mathbf{n}_{\Lambda}]] \quad\text{on }\Lambda_j, \tag*{(15)}
[[DΔηnΛ]]=0on Λj,(16)[[D\Delta\eta\mathbf{n}_{\Lambda}]]=0 \quad\text{on }\Lambda_j, \tag*{(16)}
[[∇(DΔη)⋅nΛ]]=0on Λj.(17)[[\nabla(D\Delta\eta)\cdot\mathbf{n}_{\Lambda}]]=0 \quad\text{on }\Lambda_j. \tag*{(17)}

Poisson-Kirchhoff plate theory

For the 3-dimensional case, the floating structure is modeled as a 2-dimensional thin plate governed by the Poisson-Kirchhoff theory. In this case, the plate deflection, i.e. surface elevation, follows the relation

ρbhbηtt+∇2:(C:∇2η)=pon Γstr.(18)\rho_b h_b\eta_{tt}+\nabla^2:(\mathbf{C}:\nabla^2\eta)=p \quad\text{on }\Gamma_{\mathrm{str}}. \tag*{(18)}

Where ∇2\nabla^2 is the Hessian operator and C\mathbf{C} is a fourth-order symmetric tensor containing the elastic coefficients. Note that the problem is defined in R3\mathbb{R}^3, so the Hessian operator will be a 3×33\times3 matrix, while the elastic tensor C\mathbf{C} has dimension 22 on each component. Assuming that the structure remains contained in a plane aligned with the coordinate system, e.g. normal to the zz-direction, one can extend the 2-dimensional definition of the tensor as follows

Cijkl={hb312[μ(δikδjl+δilδjk)+λδijδkl]1≤i,j,k,l≤2,0otherwise.(19)C_{ijkl}= \begin{cases} \frac{h_b^3}{12}\left[\mu(\delta_{ik}\delta_{jl}+\delta_{il}\delta_{jk})+\lambda\delta_{ij}\delta_{kl}\right] & 1\leq i,j,k,l\leq2,\\ 0 & \text{otherwise}. \end{cases} \tag*{(19)}

In equation (19), δαβ\delta_{\alpha\beta} is the Kronecker delta, μ≔defE2(1+ν)\mu\mathrel{\mathop{\coloneqq}^{\mathrm{def}}}\frac{E}{2(1+\nu)} and λ≔defνE(1−ν2)\lambda\mathrel{\mathop{\coloneqq}^{\mathrm{def}}}\frac{\nu E}{(1-\nu^2)}, with EE the Young’s modulus and ν\nu the Poisson’s ratio.

Following the same procedure as in Section 2.2, we introduce equation (10) into equation (6), resulting into the set of governing equations on the free and structure surfaces that read

ϕt+gη=0on Γfs,(20)\phi_t+g\eta=0 \quad\text{on }\Gamma_{\mathrm{fs}}, \tag*{(20)}
d0ηtt+∇2:(Cρ:∇2η)+ϕt+gη=0on Γstr.(21)d_0\eta_{tt}+\nabla^2:(\mathbf{C}_{\rho}:\nabla^2\eta)+\phi_t+g\eta=0 \quad\text{on }\Gamma_{\mathrm{str}}. \tag*{(21)}

References

  1. [1]Akkerman, I., Meijer, J., ten Eikelder, M., 2020. Isogeometric analysis of linear free-surface potential flow. Ocean Engineering 201, 107114.DOI
  2. [2]Andrianov, A., Hermans, A., 2005. Hydroelasticity of a circular plate on water of finite or infinite depth. Journal of Fluids and Structures 20, 719–733.DOI
  3. [3]Andrianov, A.I., Hermans, A.J., 2006. Hydroelastic analysis of a floating plate of finite draft. Applied Ocean Research 28, 313–325.DOI
  4. [4]Argyris, J.H., Fried, I., Scharpf, D.W., 1968. The tuba family of plate elements for the matrix displacement method. The Aeronautical Journal 72, 701–709.DOI
  5. [5]Arnold, D.N., 1982. An interior penalty finite element method with discontinuous elements. SIAM journal on numerical analysis 19, 742–760.DOI
  6. [6]Badia, S., Verdugo, F., 2020. Gridap: An extensible finite element toolbox in Julia. Journal of Open Source Software 5, 2520. doi:10.21105/joss.02520.DOI
  7. [7]Bezanson, J., Edelman, A., Karpinski, S., Shah, V.B., 2017. Julia: A fresh approach to numerical computing. SIAM Review 59, 65–98. doi:10.1137/141000671.DOI
  8. [8]van Brummelen, E., 2009. Added mass effects of compressible and incompressible flows in fluid-structure interaction. Journal of Applied Mechanics: Transactions of the ASME 76, 021206–1.
  9. [9]Causin, P., Gerbeau, J.F., Nobile, F., 2005. Added-mass effect in the design of partitioned algorithms for fluid–structure problems. Computer methods in applied mechanics and engineering 194, 4506–4527.DOI
  10. [10]Chen, X., Wu, Y., Cui, W., Jensen, J.J., 2006. Review of hydroelasticity theories for global response of marine structures. Ocean Engineering 33, 439–457.
  11. [11]Cheng, Y., Xi, C., Dai, S., Ji, C., Collu, M., Li, M., Yuan, Z., Incecik, A., 2022. Wave energy extraction and hydroelastic response reduction of modular floating breakwaters as array wave energy converters integrated into a very large floating structure. Applied Energy 306, 117953.DOI
  12. [12]Colomés, O., 2022. MonolithicFEMVLFS.jl. URL: https://github.com/oriolcgs/MonolithicFEMVLFS.jl, doi:10.4121/19601419.
  13. [13]Cottrell, J.A., Reali, A., Bazilevs, Y., Hughes, T.J.R., 2006. Isogeometric analysis of structural vibrations. Computer methods in applied mechanics and engineering 195, 5257–5296.DOI
  14. [14]Dai, J., Hellan, Ø., Watn, A., Ang, K.K., 2022. Modular multi-purpose floating structures for space creation, in: WCFS2020. Springer, pp. 257–271.DOI
  15. [15]Daversin-Catty, C., Richardson, C.N., Ellingsrud, A.J., Rognes, M.E., 2021. Abstractions and automated algorithms for mixed domain finite element methods. ACM Transactions on Mathematical Software 47, 1–36. doi:10.1145/3471138.
  16. [16]Ding, J., Tian, C., Wu, Y.S., Wang, X.f., Liu, X.l., Zhang, K., 2019. A simplified method to estimate the hydroelastic responses of VLFS in the inhomogeneous waves. Ocean Engineering 172, 434–445.DOI
  17. [17]Ding, Z., 1996. A proof of the trace theorem of Sobolev spaces on Lipschitz domains. Proceedings of the American Mathematical Society 124, 591–600.DOI
  18. [18]Engel, G., Garikipati, K., Hughes, T., Larson, M., Mazzei, L., Taylor, R.L., 2002. Continuous/discontinuous finite element approximations of fourth-order elliptic problems in structural and continuum mechanics with applications to thin beams and plates, and strain gradient elasticity. Computer Methods in Applied Mechanics and Engineering 191, 3669–3750.DOI
  19. [19]Ern, A., Guermond, J.L., 2004. Theory and practice of finite elements. volume 159. Springer.
  20. [20]Fu, S., Moan, T., Chen, X., Cui, W., 2007. Hydroelastic analysis of flexible floating interconnected structures. Ocean engineering 34, 1516–1531.DOI
  21. [21]Goudreau, G.L., Taylor, R.L., 1973. Evaluation of numerical integration methods in elastodynamics. Computer Methods in Applied Mechanics and Engineering 2, 69–97.DOI
  22. [22]Hamamoto, T., Hayashi, T., Fujita, K.I., 1996. 3D BEM-FEM coupled hydroelastic analysis of irregular shaped, module linked large floating structures, in: The Proceedings of the International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers, pp. 362–369.
  23. [23]Hamamoto, T., Suzuki, A., Tsujioka, N., Fujita, K.I., 1998. 3D BEM-FEM hybrid hydroelastic analysis of module linked large floating structures subjected to regular waves, in: The Proceedings of the International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers. pp. 192–199.
  24. [24]Isobe, E., 1999. Research and development of Mega-Float, in: Proceedings of the 3rd International Workshop on Very Large Floating Structures, pp. 7–13.
  25. [25]Karperaki, A.A., Belibassakis, K., Papathanasiou, T., 2016. Time-domain, shallow-water hydroelastic analysis of VLFS elastically connected to the seabed. Marine Structures 48, 33–51.DOI
  26. [26]Karperaki, A.E., Belibassakis, K.A., 2021. Hydroelastic analysis of Very Large Floating Structures in variable bathymetry regions by multi-modal expansions and FEM. Journal of Fluids and Structures 102, 103236.DOI
  27. [27]Kashiwagi, M., 1998. A B-spline Galerkin scheme for calculating the hydroelastic response of a very large floating structure in waves. Journal of marine science and technology 3, 37–49.DOI
  28. [28]Khakbapshaeva, T., Korobkin, A., 2002. Hydroelastic behaviour of compound floating plate in waves. Journal of engineering mathematics 44, 21–40.
  29. [29]Kim, M.W., Koo, W., Hong, S.Y., 2014. Numerical analysis of various artificial damping schemes in a three-dimensional numerical wave tank. Ocean engineering 75, 165–173.DOI
  30. [30]Kim, Y., Kim, K.H., Kim, Y., 2009. Analysis of hydroelasticity of floating shiplike structure in time domain using a fully coupled hybrid bem-fem. Journal of Ship Research 53, 31–47.DOI
  31. [31]Korobkin, A., Päräu, E.I., Vanden-Broeck, J.-M., 2011. The mathematical challenges and modelling of hydroelasticity.DOI
  32. [32]Kyoung, J.H., Hong, S.Y., Kim, B.W., 2006. FEM for time domain analysis of hydroelastic response of VLFS with fully nonlinear free-surface conditions. International Journal of Offshore and Polar Engineering 16.
  33. [33]Liu, X., Sakai, S., 2002. Time domain analysis on the dynamic response of a flexible floating structure to waves. Journal of engineering mechanics 128, 48–56.DOI
  34. [34]Liu, X., Wang, X., Xu, S., 2020. A DMM-EMM-RSM hybrid technique on two-dimensional frequency-domain hydroelasticity of floating structures over variable bathymetry. Ocean Engineering 201, 107135.DOI
  35. [35]Maeda, H., Masuda, K., Miyajima, S., Ikoma, T., 1995. Hydroelastic responses of pontoon type very large floating offshore structure. Journal of the Society of Naval Architects of Japan 1995, 203–212.
  36. [36]Morley, L., 1971. The constant-moment plate-bending element. Journal of Strain Analysis 6, 20–24.DOI
  37. [37]Nagata, S., 1998. Prediction of the motion of an elastic floating plate in waves by a breakwater., in: Proceedings of the 2nd International Conference on Hydroelasticity in Marine Technology, pp. 229–237.
  38. [38]Newmark, N.M., 1959. A method of computation for structural dynamics. Journal of the engineering mechanics division 85, 67–94.
  39. [39]Ohkusu, M., Namba, Y., 2004. Hydroelastic analysis of a large floating structure. Journal of Fluids and Structures 19, 543–555.DOI
  40. [40]Pal, S., Datta, R., Sunny, M., 2018. Fully coupled time domain solution for hydroelastic analysis of a floating body. Ocean Engineering 153, 173–184.DOI
  41. [41]Riyansyah, M., Wang, C., Choo, Y., 2010. Connection design for two-floating beam system for minimum hydroelastic response. Marine Structures 23, 67–87.DOI
  42. [42]Sahu, A., Yadav, N., Sudhakar, K., 2016. Floating photovoltaic power plant: A review. Renewable and sustainable energy reviews 66, 815–824.DOI
  43. [43]Schreier, S., Jacobi, G., 2020. Experimental investigation of wave interaction with a thin floating sheet, in: 30th International Ocean and Polar Engineering Conference, ISOPE 2020, International Society of Offshore and Polar Engineers (ISOPE). pp. 2479–2488.DOI
  44. [44]Shirkol, A., Nasar, T., 2018. Coupled boundary element method and finite element method for hydroelastic analysis of floating plate. Journal of Ocean Engineering and Science 3, 19–37.DOI
  45. [45]Takeuchi, M., Yoshida, I., 2022. Mega floating city “Green Float”: Concept and technology innovations, in: WCFS2020. Springer, pp. 3–21.DOI
  46. [46]Trapani, K., Redón Santafé, M., 2015. A review of floating photovoltaic installations: 2007–2013. Progress in Photovoltaics: Research and Applications 23, 524–532.DOI
  47. [47]Tsubogo, T., 1999. On the dispersion relation of hydroelastic waves in a plate. Journal of marine science and technology 4, 76–83.DOI
  48. [48]Verdugo, F., Badia, S., 2021. The software design of Gridap: a finite element package based on the Julia JIT compiler. Arxiv 2109.12818.DOI
  49. [49]Wang, C., Meylan, M., 2004. A higher-order-coupled boundary element and finite element method for the wave forcing of a floating elastic plate. Journal of Fluids and Structures 19, 557–572.DOI
  50. [50]Watanabe, E., Utsunomiya, T., Wang, C., 2004. Hydroelastic analysis of pontoon-type VLFS: a literature survey. Engineering structures 26, 245–256.DOI
  51. [51]Weir, P., Bennetts, L., Squire, V., 2011. Nonlinear fem approach to the analysis of the hydroelastic behaviour of floating beams, in: The 10th International Conference on Mathematical and Numerical Aspects of Waves, Citeseer. pp. 189–192.
  52. [52]Xu, P., Wellens, P.R., 2022. Theoretical analysis of nonlinear fluid–structure interaction between large-scale polymer offshore floating photovoltaics and waves. Ocean Engineering 249, 110829.DOI
  53. [53]Yago, K., Endo, H., 1996. On the hydroelastic response of box-shaped floating structure with shallow draft tank test with large scale model. Journal of the Society of Naval Architects of Japan 1996, 341–352.
  54. [54]Yasuzawa, Y., Kagawa, K., Kawano, D., Kitabayashi, K., 1997. Dynamic response of a large flexible floating structure in regular waves, in: Proceedings of the 1997 16th International Conference on Offshore Mechanics and Arctic Engineering. Part 1-B (of 6). ASME, pp. 187–194.
  55. [55]Zhang, H., Xu, D., Lu, C., Qi, E., Tian, C., Wu, Y., 2017. Connection effect on amplitude death stability of multi-module floating airport. Ocean Engineering 129, 46–56.DOI

Paper details

vlnc:W_wg7cdx8d
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 4

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Computer Science

Not recorded for this paper

View statement
Looking for related papers…
Contents