betaFeedback

WorksPhysics and Astronomy

First principles study of electron transport through diarythylene transition metal dichalcogenide molecular switch

Abstract

Computational methods are fast becoming an integral part of nanoelectronics design process. With increasing computational power, electron transport simulation methods such as Non-equilibrium Greens function (NEGF) methods now hold promise in study and design of new electronic devices. Single molecule circuits as optimized device size covers a significant electron transmission, which originated of intrinsic molecular properties. In this study, we study and design a single molecule switch based on a transition metal dichalcogenide (TMD) electrode (molybdenum disulphide (MoS2)) and a photochromic molecule. The chosen molecule, Diarylethene, is one of the only few thermally irreversible photochromes. The 1T phase of TMD monolayer has metallic properties and can act as a conducting electrode for these molecular switches. Further, the 1T phase can be functionalized using thiol chemistry, which leads to the formation of covalent C-S bonds that enable further addition of functional photochromic groups to the TMD surface. In this report, we compare and contrast different chemistry and spacer groups with respect to their response as a molecular switch, focusing on the ON/OFF transmission ratio at the Fermi level. We identify chemistries for further experimentation. If experimentally realized, these switches are expected to become integral part of various applications including molecular memories, photon detectors and logic devices.

Introduction

Molecular junction of metal/organic interfaces is predicted to transport charge in nanoscale devices, which can be a good candidate to advance several limitations of semiconductor microfabrication [1, 2, 3]. Development of single molecule as building block of switches that allow controlled electron transport is an important aim of nanoelectronics [4]. Devices such as memristors, optical memories and logic devices made from these molecular switches are expected to be extremely energy efficient due to alternate heat transport modes such as quantum tunneling. Photochromic molecules are particularly attractive for molecular switches. External stimuli based on light of specific wavelengths can be used to reversibly and reliably modulate conductance states of such molecules. The molecules are characterized as a reversible color change of a chemical species upon photoirradiation. Although vast numbers of photochromic molecules have been so far synthesized, molecules, which exhibit thermally irreversible photochromic reactivity, are limited within a few families of compounds such as flugicides and diarylethenes.

More recently, Yin et al. [5] designed and optimized the molecular switches by using the phenazine-1,6-dicarboxamides, which their core reduction transforms hydrogen bond acceptor of phenazine core into a hydrogen. Moreover, Maurer et al. [6] reported that the transient ion formed by light-induced isomeration azobenzene act as a metal-supported molecular switches [6]. The light irradiation induced switching of tunable diarylethene molecules from their nonconductive to conductive state, which contacted to gold nanoelectrodes [7]. The practical application of single molecule junctions is to distinguish biomolecules such as DNA and RNA [8]. Ohshiro et al. [9] reported that one can measure the current tunneling of DNA and microRNA sequences and diagnose cancer [10, 11, 12, 13, 14, 15, 16].

Diarylethene derivatives are the most promising candidates for applications to optoelectronic switches because of their fatigue resistance, high sensitivity and rapid response. However, one primary challenge in using this effect in a device was in achieving a good coupling of the molecule to the electrode, which implied that either reversibility is lost or the device only operates at extremely low temperatures [17]. A prominent breakthrough was achieved recently when a room temperature reversible stable photoswitch based on a graphene-diarylethene junction was discovered. A drawback of graphene used in this device design is the absence of a band gap and the difficulty to introduce one. This is an issue when coupling these switches within a device to other components based on conventional semiconductors. Two-dimensional transition metal dichalcogenides (TMDs) like molybdenum disulfide (MoS2\mathrm{MoS}_{2}) have now generated a lot of interest as tunable electrode materials recently due to their unique properties. They are composed of two-dimensional X-T-X sheets stacked on top of one another. TMD monolayers possess high mobility of charge carriers, high thermal stability, and the presence of a distinct band gap. With this material, first field-effect transistors, logical circuits and amplifiers have been manufactured. Large-scale production appears to be feasible.

Manufacturing of TMD based molecular switches has not been analyzed thus far. The primary drawback of MoS2_2 system had been the difficulty in functionalizing the system due to its inertness. Only recently techniques have emerged to allow covalent bridging of organic molecules to TMDs motivating the present study of a TMD molecular switch. It was recently shown that direct covalent functionalization of the basal planes of MoS2_2 can be done. Covalent C−SC-S bonds are generated enabling further addition of functional groups to the TMD surface. Using the flexibility of this covalent chemistry we theoretically study tethered chromophore diarylethene derivatives for use in molecular switches.

Past experience shows that connecting an active molecule to electrodes can destroy the reversibility of the molecule. A typical diarylethene molecule with open bond configuration will absorb a photon in the ultraviolet spectrum to switch to a closed-ON state [18, 19]. When visible photons are imposed, the molecule will revert back to the OFF state. Likewise, a diarylethene–graphene switch will go to ON state when UV photons are absorbed. However, the electrode is extremely stable in the ON state due to its conjugated interaction with the graphene electrode and will not revert back to the OFF state when visible photons are imposed. To improve upon the design of electrodes to avoid irreversibility, computer calculations are becoming indispensible [20]. These simulations can be used to identify spacer molecules that would prevent unfavorable interactions of electron states in the active molecule with the electrode. In this study, we will use first principles calculations to uncover rules for how to connect diarylethene molecules to TMD-based electrodes to form reliable switches. We explore two types of functional group additions alongside methyl spacer units that are used to link the active molecule to a TMD monolayer. The aim will be to tune the charge transmission characteristics at the chemical potential (Fermi level).

Methodology

The Non-Equilibrium Green’s Function formalism (NEGF) is employed for modeling electron transport through nano-scale devices [21, 22]. Electron transport is treated as a one-dimensional coherent scattering process in the scattering region for electrons coming in from the electrodes. The electrodes were made of 1T1T MoS2\mathrm{MoS}_2 lattice as shown in Figure 1. The active atoms were attached to the sulfur atoms forming a bridge between the two electrodes. When a voltage (V) is applied the Fermi levels shifts as μL=EF+eV/2\mu_L = E_F + eV/2, μR=EF−eV/2\mu_R = E_F - eV/2, where EFE_F is Fermi level of the electrode. The electron states in the molecule between these energy levels assist in electron transport. The transmission function T(E)T(E) describes the product of the number (nn) of available energy states EE and the transmission probability of electrons at that energy level. The transmission function is thus critical in describing electron transport through the scattering region. In the NEGF formalism, the transmission function T(E)T(E) is computed as:

Simulation configuration showing the left and right electrodes and the active molecule bridge, and schematic representation of one molecule-lead system

Figure 1. a. Simulation configuration shown the left and right electrodes and the active molecule bridge. b. Schematic representation of one molecule-lead system with coupled leadbound states. The electron-phonon (e-ph) interaction takes place in the molecule region.

T(E)=Tr⁡[G(E)ΓR(E)G(E)ΓL(E)](1)T(E) = \operatorname{Tr}[G(E)\Gamma_R(E)G(E)\Gamma_L(E)] \tag*{(1)}

where Γ\Gamma is the coupling matrix related to the self-energies of the electrodes and the Green’s function G(E)G(E) of the system is obtained from solving:

(ES−H)G(E)=I(2)(ES - H)G(E) = I \tag*{(2)}

where SS is the overlap matrix, HH is the Hamiltonian and II is the identity matrix. The Hamiltonian is composed as follows (LL, CC and RR denote the left lead, the central region and the right lead respectively) and the self-energy (Σ\Sigma) of the electrodes (assumed semi–infinite):

H=[HL+ΣLHLC0HLCHCHRC0HRCHL+ΣR](3)H = \begin{bmatrix} H_{L}+\Sigma_{L} & H_{LC} & 0 \\ H_{LC} & H_{C} & H_{RC} \\ 0 & H_{RC} & H_{L}+\Sigma_{R} \end{bmatrix} \tag*{(3)}

The simulation progresses using three steps. Firstly, the electrodes are modeled with KK-space sampling to compute the Hamiltonian matrices HLH_{L} and HRH_{R} and the Fermi level of the electrode EFE_{F}. Secondly, a 1D periodic calculation is performed for the scattering region, which includes the leads and the active molecule. This is a gamma point calculation to compute the HLCH_{LC}, HRCH_{RC} and HCH_{C} Hamiltonian matrices and the corresponding overlap matrices SS. The last step includes the calculation of the transmission function T(E)T(E) using the above approach, within an energy value of -1 to 1 eV with 50 increments. An example transmission function 1T TMD monolayer electrode is shown in Figure 2. The transmission function has a single integer state at Fermi level and behaves like a metallic conductor as expected.

1T monolayer electrode structure

(a)

Electron deformation density

(b)

Transmission function

(c)

Figure 2. Transmission function of a 1T monolayer electrode and its electron deformation density are shown. The transmission function has a single integer state at Fermi level and is a metallic conductor.

Electron-Phonon interaction effect on the quantum transport

To investigate the temperature effect on the quantum transport of our devices, we take into account the e−phe-ph interaction as depicted in Figure 1. Its Hamiltonian is written as H=Hleads+Hph+He−ph+HMH = H_{\mathrm{leads}} + H_{\mathrm{ph}} + H_{e-ph} + H_M, where the first term is related to contribution of two leads, which they described as [23]:

Hleads=∑αkϵαkCαkCαk†(4)H_{\mathrm{leads}} = \sum_{\alpha k} \epsilon_{\alpha k} C_{\alpha k} C_{\alpha k}^{\dagger} \tag*{(4)}

where the CαkCαk†C_{\alpha k} C_{\alpha k}^{\dagger} is the creation (annihilation) operator to create (annihilate) an electron in the state ∣k⟩|k\rangle for lead (α=L\alpha= L or RR) and ϵαk\epsilon_{\alpha k} is the corresponding energy level. The second term is the phonon (phph) contribution, which it takes the form as [23]:

Hph=ω0aa†(5)H_{\mathrm{ph}} = \omega_0 a a^{\dagger} \tag*{(5)}

and He−phH_{e-ph} is the molecule-phonon (M-ph) interaction as:

HM−ph=[ϵd+γ(a+a†)]nd(6)H_{M-ph} = [\epsilon_d + \gamma(a + a^{\dagger})]n_d \tag*{(6)}

where, γ\gamma is the coupling constant between molecule electron and phonon mode, ndn_d is electron creation/annihilation operators of molecule (nd=d†dn_d=d^{\dagger}d), and ϵd\epsilon_d is the single energy level of molecule [23, 24, 25, 26]. HMH_M is the interaction of molecule with leads, which it can be written as:

HM=∑αkVαkCαk†d+h.c.(7)H_M = \sum_{\alpha k} V_{\alpha k} C_{\alpha k}^{\dagger}d + h.c. \tag*{(7)}

VαkV_{\alpha k} is the coupling between molecule and leads, measuring the overlap of wavefunctions of molecule and leads, and dd is the electron annihilation of molecule [27]. To calculate the transmission of molecular device, we use the Green’s function, by taking into account the dressed electron-phonon (e−phe-ph) interaction. The Hamiltonian with e−phe-ph interaction is changed as [28, 29, 30, 31, 32]:

He−ph=∑αkϵαkCαkCαk†+ϵ~dd†d+∑αkV~αkCαk†d~+h.c.(8)H_{e-ph} = \sum_{\alpha k} \epsilon_{\alpha k} C_{\alpha k} C_{\alpha k}^{\dagger} + \widetilde{\epsilon}_d d^{\dagger}d + \sum_{\alpha k} \widetilde{V}_{\alpha k} C_{\alpha k}^{\dagger} \tilde{d} + h.c. \tag*{(8)}

Where, ϵ~d=ϵd−gω0\widetilde{\epsilon}_d = \epsilon_d - g\omega_0, and g=γ2ω02g = \frac{\gamma^2}{\omega_0^2} [28, 29, 30, 31, 32]; and V~αk=VαkX\widetilde{V}_{\alpha k} = V_{\alpha k}X is dressed molecule-lead coupling and XX is due to the canonical transformation of particle operator; X=exp⁡[−γω0(a†−a)]X = \exp\left[\frac{-\gamma}{\omega_0}(a^{\dagger} - a)\right].

We conclude that the e−phe-ph interaction shifts the molecule-lead coupling. To calculate the localized phonon modes in this study, we replace the expectation value of XX instead of its operator, i.e. ⟨X⟩=exp[−g(Nph+1/2)]\langle X\rangle=exp[-g(N_{ph}+1/2)]. NphN_{ph} is the phonon population as: Nph=(exp(βω0)−1N_{ph}=(exp(\beta\omega_{0})-1, where β=1kBT\beta=\frac{1}{k_{B}T}. [23] In this study, we discuss the influence of two-zero and non-zero temperature on the transmission. The differential conductance for non-zero temperature can be expressed as [23]:

G=βe24h∑ℓ=−∞∞L1Γ~Γ∫dω[A1(ω)(f~(ω−ℓω0)+2B1(ω)Gd,ehR(ω−ℓω0))](9)G=\frac{\beta e^{2}}{4h}\sum_{\ell=-\infty}^{\infty}L_{1}\tilde{\Gamma}\Gamma\int d\omega\left[A_{1}(\omega)\left(\tilde{f}(\omega-\ell\omega_{0})+2B_{1}(\omega)G^{R}_{d,eh}(\omega-\ell\omega_{0})\right)\right] \tag*{(9)}

At finite temperature, L1L_{1} equals:

L1=e−g(2Nph+1)eℓω0β/2J1(2gNph(Nph+1))(10)L_{1}=e^{-g(2N_{ph}+1)}e^{\ell\omega_{0}\beta/2}J_{1}\left(2g\sqrt{N_{ph}(N_{ph}+1)}\right) \tag*{(10)}

Where J1J_{1} is the complex-argument Bessel function. In this formula A1(ω)A_{1}(\omega) defined as:

A1(ω)={feL(ω)[1−feL(ω)]+feR(ω)[1−feR(ω)]}⋅{2+[e−ℓβω0−1][feR(ω−ℓω0)+feR(ω−ℓω0)]+[e−ℓβω0−1][feL(ω)−feR(ω)]{[feL(ω−ℓω0)[1−feL(ω−ℓω0)]−[feR(ω−ℓω0)[1−feR(ω−ℓω0)]]}},\begin{aligned} A_{1}(\omega)={}&\{f_{e}^{L}(\omega)[1-f_{e}^{L}(\omega)]+f_{e}^{R}(\omega)[1-f_{e}^{R}(\omega)]\}\cdot\{2\\ &+[e^{-\ell\beta\omega_{0}}-1][f_{e}^{R}(\omega-\ell\omega_{0})+f_{e}^{R}(\omega-\ell\omega_{0})]\\ &+[e^{-\ell\beta\omega_{0}}-1][f_{e}^{L}(\omega)-f_{e}^{R}(\omega)]\{[f_{e}^{L}(\omega-\ell\omega_{0})[1-f_{e}^{L}(\omega-\ell\omega_{0})]-[f_{e}^{R}(\omega-\ell\omega_{0})[1-f_{e}^{R}(\omega-\ell\omega_{0})]]\}\}, \end{aligned}

where, feL(R)f_{e}^{L(R)} is Fermi distribution of electron in the Left (Right) lead. And B1(ω)B_{1}(\omega) defined as [33, 34]:

B1(ω)={feL(ω)[1−feL(ω)]+feR(ω)[1−feR(ω)]}⋅[e−ℓβω0+1](11)B_{1}(\omega)=\left\{f_{e}^{L}(\omega)\left[1-f_{e}^{L}(\omega)\right]+f_{e}^{R}(\omega)\left[1-f_{e}^{R}(\omega)\right]\right\}\cdot\left[e^{-\ell\beta\omega_{0}}+1\right] \tag*{(11)}

It is worth to note that the transmission function is: Tαα′(ω)=Tr[ΓαGRΓα′GA]T_{\alpha\alpha'}(\omega)=Tr[\Gamma_{\alpha}G^{R}\Gamma_{\alpha'}G^{A}], where Γα\Gamma_{\alpha} represents the coupling matrix between the molecule and leads and defined as Γα=2π∑k∣Vαk∣2δ(ω∓ϵαk)\Gamma_{\alpha}=2\pi\sum_{k}|V_{\alpha k}|^{2}\delta(\omega\mp\epsilon_{\alpha k}), and GRG^{R} and GAG^{A} are the related and advanced Green function [23, 33, 34].

Results and discussion

The 1T electrode can be functionally bonded to the photochrome using either a CH3CH_{3} or a CH2−CO−NH2CH_{2}-CO-NH_{2} groups as shown in the experimental work in [35] and depicted in Figure 3. This system can then be attached to photochromes. Using this chemistry, we have simulated four different diarylethene molecule attachments both in the OFF and ON states. The eight different

Covalent functionalization of 1T TMDs

Figure 3. Covalent functionalization of 1T TMDs.

configurations that we simulated are shown in Figure 4. All configurations were built and the energy minimized to achieve four primary spacer groups. These are connection via CH2\mathrm{CH}_{2} spacer, CH2−CH2\mathrm{CH}_{2}-\mathrm{CH}_{2} spacer, CH2−CO−NH−\mathrm{CH}_{2}-\mathrm{CO}-\mathrm{NH}- and CH2−CO−NH−CH2\mathrm{CH}_{2}-\mathrm{CO}-\mathrm{NH}-\mathrm{CH}_{2} spacer groups respectively.

Four primary spacer groups built at ON and OFF states

Figure 4. Four primary spacer groups were built at an ON and OFF state. These four switches are based on CH2\mathit{CH}_{2} spacer, CH2−CH2\mathit{CH}_{2}-\mathit{CH}_{2} spacer, CH2−CO−NH−\mathit{CH}_{2}-\mathit{CO}-\mathit{NH}- and CH2−CO−NH−CH2\mathit{CH}_{2}-\mathit{CO}-\mathit{NH}-\mathit{CH}_{2} spacer groups respectively.

DFT calculations reveal the distribution of negative electron density in the molecule after functionalization. In the OFF state (see Figure 5), the central double bond with a positive electron density is surrounded by unfavorable regions with negative electron density. In the ON position, the conjugated system develops with positive electron density throughout the path from the left and right electrode. This is reflected in the transmission function, where the transmission is found to be at least an order of magnitude higher in the ON state. The DFT calculations were carried out within the VWN parameterization of the local density approximation function. The core electrons were described using semi-core pseudopotentials and a DNP basis set was employed with a global orbital cutoff at 4.4 Angstroms. A self-consistent iteration tolerance of 1E-5 and maximum number of 100 iterations were employed using the DMol3 program.

Regions of negative electron deformation density in the ON and OFF states

Figure 5. Regions of negative electron deformation density in the ON and OFF states reveals how the conjugated system formed in the ON state mediates an electron flow pathfrom left to right electrode.

The transmission function was subsequently calculated for all eight configurations. The results are shown in Figure 6. All eight systems tend to have significantly lower transmission than the 1T electrode shown in Figure 2, which is expected due to the effect of covalent functionalization. However, CH2−CO−NH−CH2\mathrm{CH}_{2}-\mathrm{CO}-\mathrm{NH}-\mathrm{CH}_{2} spacer group achieves the best OFF response, where the transmission function is lowest. The spacer groups do not as significantly affect the ON response as the OFF response. In effect, the ratio of the ON and OFF response is best achieved by the CH2−CO−NH−CH2\mathit{CH}_{2}-\mathit{CO}-\mathit{NH}-\mathit{CH}_{2} spacer group.

Transmission functions for eight systems at three temperatures

Figure 6. Transmission function for the eight systems at energies relative to the electrode Fermi level at T=0T=0 K and, b. Log-plot of panel a, and c. for T=300T=300 K.

Another useful plot to identify the best spacer group is to plot the transmission function at the Fermi level. Understanding of HOMO or LUMO electron states of the molecules close to the Fermi level of the electrodes can be used to well describe the transmission pathway for the electrons [36]. At the Fermi level, the electrons can tunnel to the nearest energy state in the molecule [37]. The transmission function at the Fermi level indicates this tunneling behavior for all eight systems. As seen in Figure 6, the simpler CH2CH_{2} spacers best mediate the closed transmission. However, the spacers significantly better achieve the OFF state with the CO−NHCO-NH groups. The ON-OFF ratio is an important aspect of spacer design as this signifies the quality of performance of the switching device and is best achieved the CH2−CO−NH−CH2CH_{2}-CO-NH-CH_{2} spacer group. Interestingly, this spacer group has even higher ON transmission than the CH2−CO−NHCH_{2}-CO-NH spacer, which at first look is non–intuitive, but shows the importance of computational analysis in the design of novel molecular switch candidates.

Finally, a series of simulated scanning tunneling microscopy (STM) images were obtained for the different isolated molecular switching and channels with aim of analyzing the charge transport and local states mixing in our systems. Figure 9 gives different perspectives of the open/closed molecules, while Figure 10 represents the influence of electron transport in the different channels. Both figures show the topographic simulated STM images witha remarkably resolution.

Image not extracted

Figure 9. The scanning tunneling microscopy (STM) simulation images for Molecules.

Image not extracted

Figure 10. The scanning tunneling microscopy (STM) simulation images for Channels + Molecules.

Some features with subtle information are indicated in the simulated STM figures. First, the opened molecular switching in Figure 9 reveals several protrusions, which confirm the local electronic states with different colors, while closed molecular switching’s show positive states with blue colors. Moreover, in Figure 10 electronic transport through closed channels involve uniform local density of states, while opened channels indicate mixing of states with differentdensities.

Image not extracted

Figure 7. a. The ON/OFF transmission ratio at the Fermi level of the electrodes for all four spacer groups at T=0T=0 K, b. Log-plot of panel a, and c. for T=300T=300 K.

Image not extracted

Figure 8. a. The transmission function at the Fermi level for the four systems. b. The ON/OFF transmission ratio at the Fermi level of the electrodes for all four spacer groups and c. The loss function defined as: [1−E(T=300K)/E(T=0K)]×100[1-E(T=300\mathrm{K})/E(T=0\mathrm{K})]\times100.

Conclusions

In this study, we designed a single molecule switch based on a transition metal dichalcogenide (TMD) electrode (molybdenum disulfide (MoS2\mathit{MoS}_{2})) and a photo-chromic molecule. The chosen molecule, Diarylethene, is one of the only few thermally irreversible photochromes. The 1T phase of TMD monolayer has metallic properties and can act as a conducting electrode for these molecular switches. Further, the 1T phase can be functionalized using thiol chemistry, which leads to the formation of covalent C−S\mathit{C-S} bonds that enable further addition of functional photochromic groups to the TMD surface. In this report, we compare and contrast four different spacer groups with respect to their response as a molecular switch, focusing on the ON/OFF transmission ratio at the Fermi level. We showed that the ON-OFF ratio is best when using the CH2−CO−NH−CH2\mathit{CH}_{2}-\mathit{CO}-\mathit{NH}-\mathit{CH}_{2} spacer group. Future work will entail three aspects: 1. understanding the thermal effects through ab-initio molecular dynamics simulations, 2. modeling the current-voltage relationships of the designed system using Landauer formula and 3. understanding the dynamics of electron transport in these devices when cycled through the ON and OFF states. These simulations are valuable to guide experimental realizations of these devices and these switches are expected to become integral part of various applications including molecular memories [38], photon detectorsand logic devices [39].

Conflict of Interest

The Authors declare nor conflict of interest.

Acknowledgements

The authors would like to thank the U.S. Airforce with the ID No. of …. for supporting this project.

References

  1. [1]N.J. Tao, Electron transport in molecular junctions, Nat. Nanotechnol. 2006, 1(3), 173-181.
  2. [2]S.V. Aradhya, L.Venkataraman, Single-molecule junctions beyond electronic transport, Nat. Nanotechnol., 2013, 8(6), 399-410.DOI
  3. [3]M. Taniguchi, Paying the way to single-molecule chemistry through molecular electronics, Phys. Chem. Chem. Phys., 2019, 21, 9641-9650.DOI
  4. [4]C.D. Frisbie, Designing a robust single-molecule switch, Science, 2016, 352, 1394-1395.DOI
  5. [5]J, Yin, A.N. Khalilov, P. Muthupandi, R. Ladd, V.B. Birman. Phenazine-1,6-dicarboxamides: redox-responsive molecular switches, JACS, 2019, 142(1), 60-63.DOI
  6. [6]R.J. Maurer, K. Reuter, Computational design of metal-supported molecular switches: Transient ion formation during light- and electron-induced isomerization of azobenzene, J. Phys. Condens. Matter., 2019, 31(4), 044003.DOI
  7. [7]T. Sendler, K. Luka-Guth, M. Wieser, Lokamani, J. Wolf, M. Helm, S. Gemming, J. Kerbusch, E. Scheer, T. Huhn, A. Erbe, Light-induced switching of tunable single-molecule junctions, Adv. Sci., 2015, 2(5), 1500017.pubmed.ncbi.nlm.nih.gov/27980936
  8. [8]M. Di Ventra, M. Taniguchi, Decoding DNA, RNA and peptides with quantum tunnelling, Nat. Nanotechnol., 2016, 11(2), 117-126.DOI
  9. [9]T. Ohshiro, M. Tsutsui, K. Yokota, M. Taniguchi, Quantitative analysis of DNA with single-molecule sequencing, Sci. Rep. 2018, 8, 8517.DOI
  10. [10]S. Huang, J. He, S.A. Chang, P.M. Zhang, F. Liang, S.Q. Li, M. Tuchband, A. Fuhrmann, R. Ros, S. Lindsay, Identifying single bases in a DNA oligomer with electron tunnelling, Nat. Nanotechnol., 2010, 5(12), 868-873.DOI
  11. [11]S. Chang, J. He, A. Kibel, M. Lee, O. Sankey, P. Zhang, S. Lindsay, Tunneling readout of hydrogen-bonding based recognition, Nat. Nanotechnol., 2009, 4(5), 297-301.DOI
  12. [12]S.A. Chang, S. Huang, J. He, F. Liang, P.M. Zhang, S.Q. Li, X. Chen, O. Sankey, S. Lindsay, Electronic signatures of all four DNA nucleosides in a tunneling gap, Nano Lett., 2010, 10(3), 1070-1075.
  13. [13]M. Tsutsui, M. Taniguchi, K. Yokota, T. Kawai, Identifying single nucleotides by tunnelling current, Nat. Nanotechnol., 2010, 5(4), 286-290.DOI
  14. [14]T. Ohshiro, Y. Komoto, M. Konno, J. Koseki, A. Asai, H. Ishii, M. Taniguchi, Direct analysis of incorporation of an anticancer drug into DNA at single-molecule resolution, Sci. Rep., 2019, 9, 3886.DOI
  15. [15]T. Ohshiro, K. Matsubara, M. Tsutsui, M. Furuhashi, M. Taniguchi, T. Kawai, Single-Molecule Electrical Random Resequencing of DNA and RNA, Sci. Rep. 2012, 2, 501.DOI
  16. [16]T. Ohshiro, M. Tsutsui, K. Yokota, M. Furuhashi, M. Taniguchi and T. Kawai, Detection of post-translational modifications in single peptides using electron tunnelling currents, Nat. Nanotechnol., 2014, 9(10), 835-840.DOI
  17. [17]S. I. Khondaker, Z. Yao, L. Cheng, J. C. Henderson, Y. Yao, J. M. Tour, Electron transport through single phenylene–ethynylene molecular junctions at low temperature, Appl. Phys. Lett., 2004, 85, 645.DOI
  18. [18]M. Irei, Photochromism of diarylethene single molecules and single crystals, Photochem. Photobiol. Sci., 2010, 9, 1535.
  19. [19]X. Zhang, L. Hou, P. Samor, Coupling carbon nanomaterials with photochromic molecules for the generation of optically responsive materials. Nat. Commun., 2016, 7, 11118.DOI
  20. [20]C. Jia, A. Migliore, N. Xin, S. Huang, J. Wang, Q. Yang, S. Wang, H. Chen, D. Wang, B. Feng, Z. Liu, G. Zhang, D.H. Qu, H. Tian, M.A. Ratner, H.Q. Xu, A. Nitzan, X. Guo, Covalently bonded single-molecule junctions with stable and reversible photoswitched conductivity, Science, 2016, 352, 1443-1445.DOI
  21. [21]S. Shenogin, J. Lee, A. A. Voevodin, A.K. Roy, The effect of molecular mobility on electronic transport in carbon nanotube-polymer composites and networks, J. Appl. Phys., 2014, 116(23), 233704.DOI
  22. [22]L. Shao, J. Zhao, B. Cui, C. Fang, and D. Liu, A first-principles study of overcrowded alkene-based light-driven rotary molecular motor as a possible optical molecular switch, Chem. Phys. Lett., 2017, 678, 216-221.
  23. [23]X.Q. Wang, B. H. Wu, S.F. Zhang, Q. Wang, W.J. Gong, Influences of electron–phonon interaction on quantum transport through one quantum-dot system with side-coupled Majorana zero mode, Ann. Phys., 2020, 415, 168127.DOI
  24. [24]T. Inoshia and H. Sakaki, Density of states and phonon-induced relaxation of electrons in semiconductor quantum dots, Phys. Rev. B, 1997, 56, R4355.
  25. [25]J. Konig, H. Schoeller, G. Schon, Zero-bias anomalies and boson-assisted tunneling through quantum dots, Phys. Rev. Lett., 1996, 76(10), 1715-1718.pubmed.ncbi.nlm.nih.gov/10060499
  26. [26]M. Bissiri, G. B. H. von Hogersthal, A. S. Bhatti, M. Capizzi, A. Frova, Optical evidence of polaron interaction in InAs/GaAs quantum dots, Phys. Rev. B, 2000, 62, 4642-4646.DOI
  27. [27]J. Alicea, New directions in the pursuit of Majorana fermions in solid state systems, Rep. Prog. Phys., 2012, 75, 076501.DOI
  28. [28]I.G. Lang and Y.A. Firsov, Kinetic theory of semiconductors with low mobility, JETP, 1963, 16, 1301.
  29. [29]A. Ueda, M. Eto, Resonant tunneling and Fano resonance in quantum dots with electron-phonon interaction, Phys. Rev. B, 2006, 73, 235353.DOI
  30. [30]S.N. Zhang, W. Pei, T.F. Fang, Q.F. Sun, Phonon-assisted transport through quantum dots with normal and superconducting leads, Phys. Rev. B, 2012, 86,104513.DOI
  31. [31]R.Q. Wang, Y.Q. Zhou, B. Wang, D.Y. Xing, Spin-dependent inelastic transport through single-molecule junctions with ferromagnetic electrodes, Phys. Rev. B, 2007, 75, 045318.DOI
  32. [32]Z.Z. Chen, R. Lu, B.F. Zhu, Effects of electron-phonon interaction on nonequilibrium transport through a single-molecule transistor, Phys. Rev. B, 2005, 71, 165324.DOI
  33. [33]Y. Meir, N.S. Wingreen, Landauer formula for the current through an interacting electron region, Phys. Rev. Lett., 1992, 68, 2512-2515.pubmed.ncbi.nlm.nih.gov/10045416
  34. [34]W.J. Gong, S.F. Zhang, Z.C. Li, G. Yi, Y.S. Zheng, Detection of a Majorana fermion zero mode by a T-shaped quantum-dot structure, Phys. Rev. B, 2014, 89, 245413.DOI
  35. [35]D. Voiry, A. Goswami, R. Kappera, C. de C. e Silva, D. Kaplan, T. Fujita, M. Chen, T. Asefa, M. Chowhalla, Covalent functionalization of monolayered transition metal dichalcogenides by phase engineering, Nat. Chem., 2015, 7(1), 45-49.DOI
  36. [36]I. Bâldea, Z. Xie, C.D. Frisbie, Uncovering a law of corresponding states for electron tunneling in molecular junctions, Nanoscale, 2015, 7, 10465-10471.DOI
  37. [37]D. Nozaki, C. Toher, G. Cuniberti, Low-energy conformational gating in π-conjugated molecular junctions, J. Phys. Chem. Lett., 2013, 4(23), 4192-4195.DOI
  38. [38]Y. Luo, C.P. Collier, J.O. Jeppesen, K.A. Nielsen, E. DeIonno, G. Ho, J. Perkins, H.R. Tseng, T. Yamamoto, J.F. Stoddart, J.R. Heath, Two-dimensional molecular electronics circuits, ChemPhysChem, 2002, 3, 519-525.
  39. [39]J. Andréasson, U. Pischel, S.D. Straight, T.A. Moore, A.L. Moore, D. Gust, All-Photonic Multifunctional Molecular Logic Device, J. Am. Chem. Soc., 2011, 133, 11641-11648.DOI

Paper details

vlnc:W_wtq69qu6
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents