WorksPhysics and Astronomy
The Goldilocks Prior: Physically Consistent Inference of Neutron Star Properties from Gravitational Wave Observations
Abstract
Gravitational wave observations of neutron star mergers provide a unique window into the interiors of neutron stars, probing dense matter from microscopic nuclear interactions to the macroscopic structure, including their maximum mass, beyond which the remnant collapses to a black hole. Accurate inference of these properties is crucial, as many astrophysical, nuclear, and multimessenger studies rely on gravitational wave constraints. Studies on estimating neutron-star properties from gravitational waves often employ priors that neglect correlations between parameters, or treat tidal degrees of freedom inconsistently, leading to biases in inferred neutron-star properties. We introduce a novel physically informed prior, Goldilocks Prior, that is informed by a broad, semi-parametric ensemble of equations of state, accounts for the joint correlations among the chirp mass, mass ratio, and both tidal deformability parameters, and is tailored to detector sensitivity. Using several mock binary neutron star merger simulations spanning symmetric and asymmetric masses, spinning and non-spinning systems, and a range of signal-to-noise ratios, we show that Goldilocks Prior consistently reduces biases in the inferred tidal posteriors relative to uniform and previously proposed EoS-informed priors. This framework provides a robust, systematic approach for neutron star parameter estimation, enabling more reliable inference for both current and future gravitational wave observations.
Introduction
Neutron stars (NSs) are among the most extreme objects in the universe, with densities several times larger than the nuclear saturation density [1, 2, 3, 4, 5, 6]. Unlike black holes, NSs emit information across multiple observational channels, providing a unique window into high-energy physics and astrophysics. The dense matter equation of state (EoS) plays a central role in the dynamics of NSs, as it determines the relationship between the pressure and density and thereby impacts macroscopic observables such as the NS mass and radius [2, 7]. Determining the EoS remains one of the most important open problems in modern astrophysics, as it provides insight into the microphysical behaviour of matter under extreme conditions and also informs our understanding of the formation and evolution of NSs.
Gravitational wave (GW) observations provide a direct channel for studying NSs and constraining their EoS [8, 9]. The LIGO-Virgo-KAGRA (LVK) [10, 11, 12] network of GW detectors is sensitive to compact object mergers involving NSs, having already reported a few candidate events consistent with binary neutron star (BNS) and neutron star black hole (NSBH) mergers [13, 14, 15, 16]. Several fundamental NS properties, such as masses (), spins (), and tidal deformabilities (), can be inferred by analysing the observed GW amplitude and phase evolution [17, 18]. The phase evolution of a GW signal from a BNS or NSBH system, at leading order in the post-Newtonian approximation, is dominated by its chirp mass and the mass ratio [19]. Higher-order post-Newtonian terms contain spin effects, and the tidal effects first enter at the fifth post-Newtonian order (i.e., at ), where the signal is primarily sensitive to the effective tidal deformability, . The next-to-leading order tidal term depends on a quantity called the reduced tidal deformability, [20, 21, 22]. While alternative parameterizations are possible, we adopt the leading-order combination throughout this work for convenience. Any such equivalent set of parameters can then be used to constrain the NS EoS, directly linking GW observations to the physics of dense matter.
Inference of NS source parameters from GWs typically relies on Bayesian inference techniques. These analyses often employ broad, “uninformative” priors to ensure that the resulting posterior distributions are driven primarily by the data rather than by predefined assumptions. In practice, this usually corresponds to uniform distributions over carefully chosen, broad parameter ranges intended to accommodate a wide variety of possible NS structures (see Ref. [23] for an example implementation).
This approach is perfectly reasonable when GW signals have sufficiently high signal-to-noise ratios (SNRs), as the information content of the data dominates over any previously assumed priors. For next-generation detectors such as the US-based Cosmic Explorer [24, 25, 26], and the European Einstein Telescope [27, 28, 29], substantially improved sensitivity and bandwidth are expected to yield a much higher rate of high-SNR detections than current-generation instruments [30]. However, such loud signals from BNS or NSBH systems are expected to be relatively rare given the sensitivities of currently operating GW detectors and the planned LVK upgrades over the next decade (see [16], [30], and Figure 3 in [31]). Thus, in the near future, for GW detections involving NSs prior assumptions will substantially impact the inferred source properties.
As a consequence, analyses of lower-SNR signals often rely on broad uniform priors to allow the data to contribute wherever information is present in the GW signal. However, this reliance can become problematic when physically plausible regions of the NS parameter space receive little to no support from the priors. As an example, uniform priors on commonly used tidal parameter combinations can effectively undersample low tidal deformability values, resulting in a systematic bias toward higher inferred tidal deformabilities as detailed in Section II.
Moreover, while allowing for a wide range of possible NS physics is important, NS parameters such as and exhibit strong, physically motivated correlations [20, 21, 32]. Including these correlations is important because they reflect the NS’s fundamental response to its companion’s tidal field during a merger. Adopting independent uniform priors for such parameters that are naturally correlated can lead to exploration of regions of parameter space that are inconsistent with known physics, potentially biasing the inferred constraints. Recognising both of these limitations motivates the development of approaches that more faithfully capture the underlying physics, which we present in this work.
Some previous studies have recognised and discussed the consequences of prior choice in GW analyses and outlined methods to mitigate its effects. One widely used approach is reweighting, which allows posterior distributions obtained with one prior to be statistically transformed to reflect an alternative prior at a fraction of the computational cost of re-sampling (see, e.g., [33, 34]). Reweighting can correct for the influence of a chosen prior when the relevant regions of parameter space are adequately sampled. However, if portions of the parameter space are undersampled or physically valid regions are not explored, as discussed above with independent uniform priors, reweighting cannot fully compensate [35]. This reinforces the importance of adopting physically informed priors from the outset to ensure that posterior inferences remain consistent with known NS physics.
All of the aforementioned effects may seem subtle, but they can induce systematic biases in the NS properties inferred from GWs. To prevent such biases from propagating, the priors used for inferring NS parameters should be informed by the expected behaviour of physically plausible EoSs. A wide range of parametric EoS models exist, including piecewise polytropes [9], spectral representations [36], meta-models [37], and sound-speed parametrisations [38, 39]. Recently, non-parametric representations based on Gaussian processes have also been introduced to generate causal and thermodynamically stable EoSs without specifying an explicit functional form [40, 41, 42].
For this study, we use the large ensemble of physically plausible EoSs made publicly available by Ng et al. [43] to inform our tidal priors. These EoSs are constructed using a semi-parametric approach that combines meta-modelling constrained by nuclear theory and experiments at low density with Gaussian-process-generated extensions at higher densities. By drawing from this ensemble, we can construct priors on tidal deformabilities that are dependent on the corresponding NS masses, naturally capturing the expected correlations between and .
While significant progress has been made in constructing ensembles of possible NS EoSs, it is not guaranteed that any chosen ensemble fully spans the true NS EoS. More importantly, biases can arise even when the true EoS lies within the ensemble. Detector noise can perturb the phase and amplitude of GW signals enough to shift the inferred constraints on NS properties away from their true values. If the prior is tightly constrained by a limited EoS ensemble, it may restrict the parameter space more strongly than the measurement uncertainty warrants. In this case, the posterior can become artificially concentrated near the boundaries imposed by the prior, leading to biased inferences. Therefore, priors should be constructed to reflect both the range of tidal deformabilities predicted by the EoS ensemble and the expected measurement uncertainty of the GW detector network, allowing the inference to remain driven primarily by the data rather than by prior boundaries.
Previous efforts, such as Magnall et al. [44], have explored two-dimensional joint priors linking and , demonstrating that incorporating correlations can alter posterior inferences. However, such approaches are restricted to two dimensions and do not capture the full multidimensional structure of the tidal parameter space. In particular, was assigned an independent uniform prior in Ref. [44], motivated by its limited measurability at current detector sensitivity levels [45]. While is indeed weakly constrained by present GW observations, it nevertheless occupies a restricted and physically well-defined range and exhibits strong correlations with other tidal parameters.
More recently, Wouters et al. [46] constructed a data-inspired neural prior that captures the correlations of the tidal parameters with the masses, learning their joint distribution from a phenomenological EoS parameterisation. While such parametric EoS representations provide a useful and computationally tractable framework, they may not fully capture the breadth of physically plausible nuclear matter behaviour, particularly in regimes where theoretical uncertainties remain large. In particular, some parameterisations can underrepresent the diversity of high-density compositions, where nucleonic, hyperonic, and quark matter phases may contribute in ways that are difficult to encode within a single functional form.
By contrast, realistic analyses can benefit from semi-parametric EoS ensembles that are strongly constrained at low densities by crust physics and meta-model descriptions, while retaining greater flexibility at higher densities where observational and theoretical guidance is weaker. Such ensembles are designed to span a broader class of physically motivated models, rather than being confined to a single phenomenological parameterisation, thereby offering a more comprehensive representation of current EoS uncertainty.
Both Magnall et al. [44] and Wouters et al. [46] represent meaningful progress toward the shared goal of improving NS prior inference in GW parameter estimation. Building on these developments, this work presents a prior framework that aims to overcome several limitations of previous approaches. We construct a novel prior over the full tidal parameter space, informed by a semi-parametric EoS ensemble and the expected detector response, thereby ensuring physically motivated prior support. Since our goal is to develop a prior that is neither overly informative nor purely agnostic, we refer to this conditional prior as the Goldilocks prior.
We do this by assuming a uniform distribution of NS masses and constructing a four-dimensional conditional prior in the space. The choice of mass population distribution is flexible and can be replaced by alternative distributions according to one’s preference. Similarly, the specific choice of the two tidal dimensions does not significantly affect the results, as discussed later in this work.
We then perform a detailed Fisher analysis to estimate the median uncertainty in as a function of its true value for the considered BNS systems with the current-generation LVK network sensitivity. Combining the EoS ensemble with the expected detector uncertainty, we construct the Goldilocks prior.2
Using this new prior, we perform extensive Bayesian parameter inference on mock data of BNS systems, with a range of tidal deformabilities and located at varying distances, resulting in different SNRs. We use IMRPhenomXAS NRTidalv3 for injection and recovery because its calibration includes an expanded suite of numerical relativity data covering high-mass ratios, a broader range of EoSs, and dynamical tidal effects [47, 48]. Across the mock GW simulations studied, the Goldilocks prior yields the smallest prior-driven bias in the and posteriors relative to uniform priors and the prior of Magnall et al. [44]. Given the broad scope of this work, a follow-up study applying this approach to NSBH systems and real GW data will be presented in companion publications.
The rest of this paper is organised as follows. Section II describes the standard priors used for analysing GWs from BNS mergers, with Section II A highlighting regions of space with minimal or no support and Section II B identifying prior volume with physically inconsistent regions in the NS parameter space. Section III presents the construction of the new prior, including Section III A, which details the EoS ensemble, Section III B, which describes the incorporation of detector-dependent uncertainties, and Section III C, which explains the creation of a multidimensional conditional prior. We present the results of our study in Section IV and conclude in Section V with a summary of our findings and future prospects.
State of the art
GWs encode information about several source properties of NSs, including their masses (), spins (), and tidal deformabilities (), where labels the two NSs in the binary. In a Newtonian framework, the tidal deformability of a component is related to its mass via
where denotes the NS radius, the quadrupolar tidal Love number, the speed of light, and the gravitational constant [20]. The relationship between and is determined by the values of and , which are in turn set by the NS EoS. Although and can be inferred from GW observations, GW parameter estimation typically employs a parameterisation that follows the leading-order mass and tidal contributions in the post-Newtonian expansion. Consequently, GW analyses use parameter combinations that naturally arise within the post-Newtonian formalism. Rather than , the chirp mass,
where is the total mass, is used together with a second mass parameter. This second parameter is commonly taken to be either the symmetric mass ratio, , or the mass ratio, . In this work, we adopt as the second mass parameter.
Similarly, tidal effects enter the waveform primarily through the leading-order
and the next-to-leading-order contribution is captured by
Thus, the combination can also be used as opposed to the combination. Throughout this work, we adopt and as the mass parameters, and and as the tidal parameters.
Generally, Bayesian parameter estimation techniques are used to extract these NS source properties from the GW data observed. Let the set of intrinsic source parameters, together with the extrinsic parameters required to model an observed GW signal, be denoted by , and let represent the observed GW data. Bayes’ theorem then yields the posterior probability distribution for the parameters given the data,
where is the likelihood, is the prior distribution, and is the normalisation constant, commonly referred to as the evidence.
As discussed in Section I, for the current generation of LVK detectors the joint prior distribution, , can play a dominant role relative to the likelihood, , motivating a careful examination of its construction. For the extrinsic parameters in , it is standard to assume that binaries are distributed isotropically in sky position and orientation [16]. The primary modelling choices, therefore, concern the intrinsic parameters. NS masses are typically assigned uniform priors on the component masses, from which and are derived. Since $\mathcal{M}_c is tightly constrained by matched-filter searches, the maximum and minimum bounds placed on can be correspondingly narrow [49]. The specific choices adopted in this work are described in Section IV. Spin priors are informed by observations of Galactic BNSs, which indicate that even the fastest-spinning systems expected to merge within a Hubble time, such as PSR J0737–3039A [50] and PSR J1946+2052 [51], will have dimensionless spins of at most – at merger. Motivated by this, GW analyses generally adopt low-spin priors with [13, 23]. For completeness, alternative high-spin priors () are also commonly considered, and parameter estimation is often performed under multiple spin assumptions [23].
Given an EoS, of each star is uniquely determined by . Consequently, as seen from Eqs. (1)–(3), and are likewise completely determined by the component masses alone and do not constitute independent degrees of freedom given the EoS. In such an idealised scenario, posteriors for all tidal parameters could, in principle, be obtained directly from the inferred mass posteriors. In practice, however, this is not possible because the NS EoS remains largely unknown.
As a consequence of this uncertainty, we would need to treat the tidal deformabilities as independent parameters. Tidal priors remain poorly constrained, owing both to the limited number of astrophysical observations and to the wide range of physically plausible values predicted by existing EoS models. Millions of candidate EoSs in the literature predict markedly different maximum values for over the relevant mass range, motivating the common choice of a conservative upper bound 3. The formalism of Flanagan and Hinderer [20] further requires to be non-negative for NSs, setting the lower bound . Given the small number of BNS detections to date, the data provide little guidance on the shape of the prior, and a uniform distribution between these bounds is therefore commonly adopted as a broad and minimally informative choice [23, 52]. Analogous uniform priors are often employed for the reparameterised tidal quantities, with and , where is typically the more tightly constrained combination. Here, denotes a uniform distribution.
It is important to note that choosing uniform priors in either the component tidal deformabilities, , or in the combinations leads to qualitatively similar results. For priors uniform in , the parameters must ultimately be converted to for waveform evaluation, since it is the leading-order tidal parameter. Conversely, when using uniform priors in , the physical constraint that must also be enforced. In both cases, these transformations and constraints produce roughly equivalent prior support, so the choice of parameterisation does not qualitatively change the analysis. We adopt the combination for this study.
Regions of limited support in the parameter space
For the chosen parameterisation , standard analyses typically adopt uniform priors together with the constraint , as described above. These constraints induce a non-uniform implied prior in , shown in Figure 1. In addition to the tidal parameters, we sample uniformly in the component masses and use these to transform consistently between the two tidal parameterisations. The implied prior on in the left panel in Figure 1 peaks around and has very low support at both the smallest and largest values of . The lack of support at low arises because only a single combination of and , namely, , produces . By the same logic, lower values () correspond to relatively few combinations of , and therefore receive comparatively low prior support.
Figure 1. Implied prior distributions of (left) and (right). Assuming uniform priors on and , together with constraints on , produces this emergent prior structure from 2 million samples. The flat purple line is the true uniform prior, and the orange curve is the implied prior after the constraint. Green hatching marks where the constraint adds support relative to the uniform prior, while red hatching indicates where it removes support. The constraint suppresses support for both high and low values, while is pushed toward zero, with its negative range disproportionately favoured.
Similarly, the right panel shows that develops a non-trivial structure due to the same constraints: support is concentrated near , biased toward negative values, and progressively decreases for positive values. Together, these implied prior shapes demonstrate that even a supposedly uninformative uniform prior is already informative, indirectly favouring higher and negative values. The structure of both and priors indicates a systematic overestimation in inferred tidal parameters that can affect GW analyses if not properly accounted for.
As expected from these emergent priors, Khadkikar et al. [31] observed a systematic overestimation of inferred for EoSs such as APR4 ([53]) and SLy ([54]), which predict lower and intermediate values. The study considered not only the current generation of GW detectors but also planned LVK upgrades and next-generation detector networks, including Cosmic Explorer and the Einstein Telescope. Similar overestimation trends were observed for the next LVK upgrades to the A# sensitivity for both APR4 and SLy EoSs ([55]). While the bias was significantly reduced for highly sensitive next-generation GW detectors, heavier mass systems having low tidal deformabilities (see Eq. (1)) continued to exhibit this overestimation.
These results highlight that systematic biases induced by such implied tidal priors directly impact NS property inference and, consequently, constraints on the NS EoS. Even with highly precise next-generation detectors, heavier BNS systems that are important for determining the mass at which NSs collapse to black holes remain susceptible to these biases. It is therefore essential to adopt physically motivated priors that both reflect the full plausible parameter space and have well-defined distributions to avoid biasing tidal parameter inferences.
Physically inconsistent regions in the parameter space
According to Eq. (1), heavier NSs are expected to have lower values, while lighter NSs have larger values. Incorporating this physically motivated relation into the prior already provides a clear advantage, as it reduces the effective prior volume and, consequently, the sampling cost of parameter estimation analyses. This effect is illustrated in the left panel of Figure 2, which shows the two-dimensional distribution in the - plane.
Figure 2. Comparison between the standard prior described in Section II and the tidal deformability ranges predicted by physically motivated EoSs consistent with existing observational constraints. The APR4 EoS (blue) predicts smaller values, SLy (red) predicts intermediate values, and DD2 (green) predicts larger values. The left panel shows the two-dimensional prior in the – plane, while the right panel shows the corresponding prior on . The shaded red band marks the physically disfavoured region. The standard uniform prior spans a substantially larger region of the – space than is supported by the EoS bounds. More importantly, the implied prior from the standard choice differs markedly from that obtained when physically plausible EoSs are imposed.
The prior distributions in Figure 2 are generated using samples drawn from mock mass distributions that are uniform in the component masses, , with the ordering , along with the uniform tidal priors as described in Section II. The left panel compares the region populated by the standard uniform prior with the region spanned by representative EoSs that are consistent with current GW observations ([56]). In particular, APR4 EoS shown in blue predicts smaller values, SLy in red predicts intermediate values, and DD2 in green predicts larger, more extreme values. It is evident that the uniform prior covers a substantially larger region of the - space than that occupied by these chosen, representative set of physically plausible EoSs.
The right panel highlights the significant impact also on . Here, the implied prior from Figure 1 is compared with priors constructed from the same three EoSs. The EoS-based prior, denoted , is obtained by drawing samples uniform in component masses as described above and mapping them to tidal deformabilities using the corresponding EoS predictions. In contrast to the broad prior induced by uniform assumptions, the EoS-based representative conditional priors yield a much narrower distribution, sharply centred around . Moreover, whereas the uniform prior places a substantial weight on negative values, the EoS-based prior shows almost no support for negative values and restricts the positive range to a much narrower interval.
This comparison shows that, even though is weakly constrained by current GW data, its physically allowed range is far more restricted than is assumed under standard priors. A narrow, physically motivated prior on therefore has the potential to significantly improve inference, rather than being safely ignored. This provides a clear motivation for adopting EoS-informed priors throughout this work, as they naturally encode the relevant mass–tidal correlations and avoid unnecessary exploration of unphysical regions of parameter space.
Post-processing to change priors
The distortions described above do not, by themselves, force a re-analysis. If a prior is judged unsuitable after the Bayesian inference is carried out, the posterior it produced can be mapped onto a different prior without repeating the computationally expensive sampling. Given posterior samples drawn under , the posterior corresponding to an alternative prior follows from
which requires only that have support wherever does. Since a full parameter estimation run over this many dimensions is expensive, this is an attractive alternative to sampling afresh, and it is widely used [33, 34].
The condition on shared support is, strictly, satisfied. The implied uniform prior does not vanish at , since the single combination produces it, so remains nonzero and the ratio in Eq. (5) stays finite everywhere. The difficulty is practical rather than formal. Reweighting is applied not to densities but to a finite set of samples, each assigned a weight . The reweighted posterior is assembled from whichever samples the original run happened to draw, rescaled, and no new samples are produced. Since places very little support at low , as shown in Figure 1, few samples are drawn there, and those few receive the largest weights. The recovered density in this region is then built from a handful of points, producing spurious spikes rather than a faithful reconstruction. We quantify this in Section IV and Appendix D.
A balanced, physics-informed prior
A prior that is neither blind to the physically motivated relationship between and dictated by the dense matter EoS, nor overly constrained by any specific EoS realisation, provides a natural improvement over the shortcomings of agnostic uniform priors discussed above. In this work, we propose a three-part framework to construct such a prior, designed to reduce biases and faithfully capture physically allowed correlations. First, the prior is informed by a broad ensemble of physically plausible EoSs to capture the expected correlations between , , and as highlighted in Section III A. Second, to account for the possibility that a noise realisation at the time of detection might affect and , additional flexibility is introduced through detector sensitivity, as described in Section III B. This ensures the prior remains robust to uncertainties ushered in by noise while incorporating realistic measurement constraints. Third, the construction explicitly includes alongside , and , producing a fully four-dimensional conditional prior that consistently captures all tidal correlations and eliminates biases arising from the inconsistent treatment of , as detailed in Section III C.
Neutron Star Physics
We use 105,000 EoSs from the Ng et al. [43] dataset to construct the ensemble that informs our priors. For each EoS, we generate a mass grid of 1000 samples and compute the corresponding values. We assume a uniform distribution in both masses, though this choice can be modified as desired. We adopt as the minimum mass and set the maximum mass for each EoS to , the maximum cold NS mass allowed by that EoS. EoSs with are rejected, consistent with observations of the heaviest known pulsars, whose median mass values exceed [57, 58, 59]. However, it is important to note that the threshold values can be changed as needed. The resulting samples are then converted to for subsequent analyses.
An explicit comparison between the priors described in Section II and the Goldilocks prior is shown in Figure 3. This figure clearly illustrates the limitations of uniform priors highlighted in Section II B. In this corner plot, the distributions of two million , , and samples are shown for both priors. For the distribution, the Goldilocks prior depicted in teal is significantly narrower than the uniform prior in orange, reflecting the physical constraints imposed by realistic EoSs. The expected inverse relationship between and is also visible in the - plot. While the - relation is standard, the EoS ensemble additionally couples to the tidal parameters, further reducing the prior volume. We also discuss the origin of the power-law tail of the one-dimensional prior distribution obtained for in Appendix B.
Figure 3. A comparison between the new Goldilocks prior proposed in this work (teal) and the standard uniform priors commonly used in the literature (orange), shown as a corner plot. The dotted curve shows a true uniform prior without the constraint applied. Two million samples are generated for each prior, with contours from one sigma to four sigma. The – projection demonstrates, consistent with the discussion in Section II B, that physically motivated equations of state substantially reduce the allowed prior volume in this plane. This correlation leaves an imprint on the correlations of the tidal parameters with the mass ratio as well. The projections involving further show that this parameter is significantly more constrained under the new prior, in contrast to the broader distributions produced by the standard uniform priors.
The bottom row shows that is more tightly constrained under the Goldilocks prior, with substantial support concentrated near . We impose the mass ordering constraint for drawing component mass samples, as is com-
monly done. The constraint produces a positive skew in , as already visible in the EoS-based examples of Figure 2. The ordering generates a large fraction of nearly symmetric systems, which naturally yield . For increasingly asymmetric systems, the same constraint biases toward larger values and toward smaller values. Combined with the inverse mass–tidal deformability relation, this favours lower and higher , resulting in when evaluated using Eq. (3).
In the Goldilocks prior of Figure 3, this positive skew and the narrow - correlation are less sharply defined compared to the noise-free EoS priors of Figure 2. This broadening is introduced deliberately through the detector-sensitivity noise described in Section III B. The reductions in prior volume, particularly in , significantly aid in constraining the posteriors, as demonstrated in Section IV.
Detector Sensitivity Dependence
Noise fluctuations in the data can shift the inferred values, potentially biasing tidal and thus EoS inferences. This effect is particularly pronounced for detectors with lower sensitivity, where noise fluctuations can significantly influence the inferred NS parameters. In such cases, priors informed by EoSs can inadvertently impose constraints that are tighter than those supported by the data, effectively biasing the inference toward the properties of the chosen EoS ensemble.
To mitigate this issue, we introduce a controlled spread in the and values derived from the EoS ensemble and scale it with detector sensitivity. This prevents the analysis from being artificially restricted by the EoS-informed prior when the data themselves are not sufficiently informative. As sensitivity improves with next-generation GW detectors, measurements will become more precise, and the likelihood will dominate the inference, allowing even relatively well-constrained EoS ensembles to be used safely.
A welcome consequence of this approach is that it also addresses a more fundamental limitation of EoS-informed priors. Even if the prior is broadened, one cannot guarantee that the true NS EoS lies within the ensemble used to construct it. The true dense-matter EoS may lie inside the ensemble, at its boundaries, or entirely outside it. If the ensemble is too restrictive, the inference can become dominated by the prior, effectively “overfitting” to the chosen EoS set and introducing systematic biases. While not the primary motivation, incorporating a sensitivity-dependent spread also reduces the risk that the inference is biased by the particular EoS ensemble considered.
We use Fisher simulations to estimate the median uncertainty in , denoted , as a function of the true of the signal. Since our focus is on the relatively low SNR regime, these simulations are performed using the current sensitivity LVK detector network, which includes the LIGO Hanford Observatory, LIGO Livingston Observatory, and the Virgo Observatory [10, 11]. Details of the simulation setup are provided in Appendix A. The resulting is interpolated over the same range of values used to construct the prior grid in Section III C.
For every generated sample , we decide whether to perturb it by a single draw. The underlying EoS correlations should be preserved, so only a fraction of the samples are perturbed while the rest retain their exact EoS values. This is a standard approach in statistics, known as Huber contamination, in which only a fraction of a dataset is contaminated to build resilience against outliers [60, 61]. We contaminate a fraction of the samples, chosen to approximate the fraction expected to fall beyond under the measured uncertainty. A given sample is either perturbed or left at its exact EoS values; the same decision applies to both tidal parameters, so a sample is either noisy in both and or exact in both. For the perturbed samples, the spread in is set by , and no spread is introduced in , which is well constrained with uncertainties at the level of [16].
We introduce independent noise in as well. There is no physical reason for detector noise to perturb and in a correlated manner, so we do not tie the two fluctuations together. Applying the Fisher information to yields uncertainties that are consistently large and nearly independent of the component masses or , contrary to the case for . We therefore assign a fixed Gaussian spread with a standard deviation of 500, rather than a binary dependent Fisher error. This reflects the weak measurability of at current detector sensitivity while keeping the prior broad enough not to over-constrain it.
This sensitivity-motivated broadening accounts for the finite resolving power of the GW detector and helps reduce biases or overfitting to a specific EoS ensemble. The spread shown in Figure 3 arises directly from this procedure.
For the contaminated samples, large values of can occasionally produce negative draws of values, which are unphysical. Rather than discarding these draws, we reflect them into the region , following the standard treatment in the literature. Reflection preserves the number of samples and redistributes them smoothly across the low region. No such treatment is required for , which has no strict requirements of being positive.
The constraint reshapes the prior, as shown in Section II A and Figure 1. Samples drawn from the EoS without added noise are unaffected, since they are already physical with positive-definite . The contaminated samples, however, can take unphysical values. To prevent the constraint from distorting the prior into an implied-prior shape, as happens for the uniform prior, we correct the contaminated samples analytically using the known form of the constraint. This preserves the intended shape of the prior throughout the analysis.
One might ask why this construction is preferable to simply using the uniform prior or the noiseless EoS-based prior. The uniform prior lacks the EoS-based correlations, while the noiseless EoS prior can be overly restrictive. The contamination-and-correction treatment described here occupies the middle ground, and its benefit is evident in the results of Section IV, particularly for values near the edge of the EoS ensemble.
Multi-dimensional Parameter Correlations
Using the prior constructed by combining the methods described in Section III A and Section III B, we build a fully EoS-informed four-dimensional conditional prior over the masses and tidal parameters, . This captures the physical correlations among all four parameters and significantly constrains the prior volume.
Under the constraint , one would generally expect . However, this ordering is not guaranteed in all scenarios. For example, NSs that might have undergone quantum chromodynamic phase transitions or contain exotic components, such as dark matter admixtures, may violate this relation (see Refs. [62, 63] and references therein). As the noisy and values receive independent noise, the prior can occasionally admit , naturally avoiding assumptions about a specific ordering in . A benefit of this framework is that it makes the prior flexible enough to accommodate even exotic compact object systems, should they be observed.
We construct a four-dimensional conditional prior in the parameter space. The prior is evaluated on a fixed grid with dimensions . The grid spans values corresponding to BNSs with component masses between and , covering the full range of plausible BNS configurations. The range of is set to to remain consistent with the uniform priors used for comparison. Similarly, is evaluated over the range . This grid is used to sample the prior shown in Figure 3. For the full ensemble of 105,000 EoSs, the grid evaluation requires only a few minutes and can be efficiently recomputed if needed.
For current-generation networks, the range used for analyses is generally narrower than the one used to create the grid. This is because matched-filter searches provide a reasonably good estimate of , particularly for BNS signals, due to the high density of templates in this region of parameter space [49]. As the grid evaluation is not computationally expensive, we create a denser grid in as and when required for our mock simulations. When we refer to here, we are specifically referring to the source frame chirp mass. For further details on how the source frame chirp mass is handled, readers are directed to Appendix C.
Results
In this section, we present the results of several mock simulations designed to assess the performance of our proposed prior. We simulate GW signals, inject them into a hypothetical realisation of the current-sensitivity GW detector network, and perform parameter estimation to compare four priors: the implied uniform prior of Section II A, the uniform posterior reweighted to mimic a true uniform prior following Section II C, the prior of Magnall et al. [44], and the Goldilocks prior introduced in this work. We use the files made public by Magnall et al. [44] to compare with their prior as well [44, 64, 65].
A central result of this section is that the implied uniform prior cannot be used directly in the low- regime, where it is biased by construction. Its posteriors require correction, and reweighting is the standard means of applying one. As hinted at before in Section IIC, we show in this section decisively that reweighting cannot be relied upon in the low regime.
Owing to the EoS ensemble used to construct the prior in Magnall et al. [44], it assigns negligible support to values that lie outside it. As a result, an event at such a value is rejected regardless of what the data prefer. Neither the implied uniform prior, nor its reweighted counterpart, nor the prior of Magnall et al. [44] is consistent across the cases considered below as each succeeds in some regimes and fails in others. The Goldilocks prior is consistent throughout, though not unbiased in every case. Where a residual bias remains, it traces to the measurability of the mass ratio and the tidal parameters rather than to the prior, as we demonstrate below.
We organise the analyses by increasing dimensionality. The symmetric and asymmetric systems of Section IV A and Section IV B are analysed in the four-dimensional space, with all remaining parameters fixed at their true values. This is the most favourable setting for the comparison priors. This is because with every other correlation removed, the prior-volume reduction offered by the Goldilocks prior cannot contribute, and the width of each posterior is set by the SNR and the detector sensitivity alone. The spinning systems of Section IV C extend this to six dimensions. A full treatment including extrinsic parameters is presented in the companion paper applying the Goldilocks prior to real events.
All analyses are carried out using the Bayesian inference library bilby [66, 67, 68, 69] with the dynesty sampler [70] using 2048 live points. To accelerate likelihood evaluations, we employ the relative binning implementation available within bilby [71, 72, 73]. Since our prior is evaluated only once and subsequently interpolated during sampling, this work represents the first application of such multi-dimensional joint priors in bilby analyses. This implementation yields computation speeds comparable to those of analytic priors.
We also note that, since we aim to assess the performance of Goldilocks prior, all parameter estimation analyses in this work are performed as zero-noise injections. As shown in [74, 75], the posterior obtained from a zero-noise injection approximates the ensemble-averaged posterior over Gaussian noise realisations, allowing us to avoid the computational cost of repeated simulations while still capturing the expected measurement uncertainties in various parameters (also see Refs. [45, 76]). One could carry out the same study over multiple noisy realisations to obtain the same ensemble behaviour; we instead use the zero-noise case as a computationally efficient representation of this average behaviour to benchmark the Goldilocks prior.
To demonstrate both the flexibility and robustness of the Goldilocks prior, we subject it to a series of stress tests in scenarios where parameter inference is expected to be particularly susceptible to bias. In Section IV A, we analyse a symmetric – BNS system, varying both the SNR and the injected values. In Section IV B, we perform an analogous study for two asymmetric mass systems. In Section IV C, we evaluate the performance of the priors for non-spinning and spinning BNS systems. Finally, in Section IV D and Section IV E, we evaluate the accuracy of the inferred and posteriors as well.
Symmetric mass tests
We begin with a symmetric 1.4–1.4 system. For this configuration the lowest predicted by any EoS in our ensemble is 67.4, so an injection at lies well outside the ensemble, and sits just below its boundary. These values test the priors precisely where an EoS-informed construction is most likely to fail. Figure 4 shows the recovered posteriors for at network SNRs of 8, 10, 15, 30 and 100.
Figure 4. Posterior distributions for a symmetric 1.4-1.4 M BNS with , injected across network SNRs of 8, 10, 15, 30, 100 (left to right). The teal curve corresponds to the Goldilocks prior introduced in this work, orange shows the implied uniform prior of Section II A, purple to the uniform posterior reweighted to mimic a true uniform prior described in Section II C and the red curve to the priors prescribed by Magnall et al. [44]. The dashed vertical line marks the injected value. For this configuration the lowest predicted by any EoS in the considered ensemble is , so the injected value lies well outside the ensemble. The Goldilocks prior contains the injected value at every SNR and its mode coincides with the injection from SNR 10 onward. On the contrary, the implied uniform and Magnall et al. [44] priors are positively biased and the reweighted posterior shows spurious structure at low driven by the amplification of a small number of samples (see Appendix § 1.3.4)
At SNR 8, the leftmost panel, the signal sits at the threshold below which detections are not considered. This is the least informative case available. The reweighted posterior appears to perform well, peaking close to the injection. However, this behaviour is an artefact because the peak is built from a handful of raw samples amplified by more than an order of magnitude (Appendix § 1.3.4). The implied uniform posterior closely resembles its prior, retaining almost no support at . The Goldilocks prior is comparably uninformative at this SNR, but contains the injected value within its support. The prior of Magnall et al. [44] places its mode near and assigns negligible support at the injection, so an event of this kind would be recovered incorrectly with that prior. The Goldilocks prior outperforms the prior of Magnall et al. [44] for two reasons. Its EoS ensemble is broader, so it does not overestimate as the more restrictive ensemble of Magnall et al. [44] does, and the detector-sensitivity noise gives it support at low where the injection requires it.
At SNR 10 the reweighting failure becomes explicit. The reweighted posterior develops a sharp spike at , produced by a single raw sample in a bin where the sampler found almost none. Reweighting is therefore not trustworthy without a number of live points large enough to populate the low- region, which the implied uniform prior makes prohibitively difficult by construction. The posterior distribution inferred by using Goldilocks prior now peaks at the injected value. The posterior remains broad, but the prior-driven bias identified in Section II A is already absent. Both the posteriors inferred from implied uniform and Magnall et al. [44] priors peak away from the injected value, and remain positively biased at this SNR.
At SNR 15 and 30 the reweighted posterior remains irregular and its mode drifts away from the injection, showing that it recovers neither the correct density nor the correct peak. The Goldilocks prior keeps its mode at the injected value while the posterior narrows. The implied uniform and Magnall et al. [44] priors remain positively biased. We emphasise that this comparison is deliberately favourable to the uniform priors as all parameters other than are fixed at their true values and thus, the significantly helpful prior-volume reduction that the Goldilocks prior provides cannot contribute. Even under these conditions, the three comparison priors are biased.
At SNR 100 the likelihood dominates and all priors are expected to agree. They do, with the exception of the reweighted posterior, which continues to show noise at low where it amplifies sparse samples. This persists even at the highest SNR considered, and is one of our arguments against using reweighted posteriors obtained from the implied uniform priors for BNS inference.
All four posteriors nonetheless retain a slight bias toward lower at this SNR. This is not a prior effect. For a symmetric injection the mass ratio rails against , so its posterior can only extend toward lower , producing a one-sided tail. Since depends on the component masses through Eq. (2), this tail maps directly onto lower values and draws the recovered posterior slightly below the injection. The effect follows from the definition of and the mass ratio boundary, and is common to all four priors.
This result encapsulates the central motivation of the Goldilocks prior. EoS-informed correlations are a powerful tool for improving tidal parameter recovery, but only when the prior remains broad enough to reflect genuine physical uncertainty rather than suppress regions of parameter space that the data cannot rule out.
As the performance of a prior should be judged by its recovery across a range of possible values, we now vary the injected value at a fixed network SNR of 10. Figure 4 fixed and varied the SNR. Figure 5 does the reverse, showing , 50 and 100. We use SNR 10 because it represents the regime in which the priors still dominate the inference.
Figure 5. Posterior distributions of for a symmetric 1.4–1.4 BNS at a network SNR of 10, for injected values , 50 and 100 (left to right). Curves follow Figure 4 with teal for the Goldilocks prior, orange for the implied uniform prior, purple for the reweighted uniform posterior, and red for the prior of Magnall et al. [44]. The dashed vertical line marks the injected value. The lowest predicted by the EoS ensemble for this configuration is 67.4, so the first two injections lie outside it and the third lies within reach. The Goldilocks prior places its mode at the injection in all three cases. The prior of Magnall et al. [44] peaks near irrespective of the injected value. The reweighted posterior shows spurious low- structure in all three panels, including at , where the implied uniform posterior is already unbiased.
The posterior recovered under the Goldilocks prior peaks at the injected value in all three panels. Under the implied uniform prior the posterior is positively biased at and 50, and the bias diminishes as the injected value increases, with recovered accurately. This follows from the geometry described in Section II A rather than from any EoS information. The implied uniform prior suppresses low because few combinations of produce small , and this suppression matters less as the injection moves away from that region.
The inference using Magnall et al. [44] is biased for a different reason. The posterior recovered under it peaks near in all three panels, moving by only a few tens of units across a factor of four in . Its EoS ensemble does not support any of the injected values, so the recovered posterior reports the ensemble rather than the data. This bias would weaken for injections inside the region its ensemble supports for a – system, which none of the three values considered here reach.
The reweighted posterior is irregular in all three panels and introduces support at low in each. The panel is the clearest case. There the implied uniform posterior is already unbiased and no correction is needed, yet reweighting assigns substantial weight to a low- region the data do not favour. The correction does not merely fail to improve the posterior, it degrades one that was already correct.
This is the behaviour anticipated in Section II C. The weights are largest exactly where the implied uniform prior sampled least, so the reweighted density in that region is set by a handful of points rather than by the likelihood. Across the three injections, neither the uncorrected uniform posterior nor its reweighted counterpart is reliable. The uncorrected posterior is biased at low and unbiased at , while the reweighted posterior is irregular throughout. Only the Goldilocks prior recovers the injected value consistently.
Asymmetric mass tests
We can also consider signals like GW190425, which involve asymmetric masses [52]. As discussed in Khadkikar and Singh [77], hypotheses that GW190425 originates from an NSBH merger or a binary black hole merger must be considered seriously, in addition to the widely considered BNS scenario. With a prior like the Goldilocks prior, which correctly treats the low- region, it is particularly interesting to analyse such systems, as they can exhibit very low values due to the presence of one or two black holes in the binary. To test the performance of our prior set for asymmetric mass systems, we consider two cases:
Intermediate asymmetry: – system
High asymmetry: – system
A detailed analysis of GW190425 itself is presented in the companion paper applying the Goldilocks prior to real events.
We begin with the intermediate case. The – system closely resembles GW190425, which motivates its choice here. The lowest predicted by the EoS ensemble for this configuration is 17.7, and we inject , which lies below that bound. Figure 6(a) shows the recovered posteriors at network SNRs of 8, 10, 15, 30 and 100, and Table 1 lists the corresponding medians and 90% credible intervals.
Figure 6. Recovered posteriors for the two asymmetric systems at network SNRs of 8, 10, 15, 30 and 100 (left to right). Panel (a) shows the intermediate asymmetry case, 1.8–1.6 with , for which the lowest predicted by the EoS ensemble is 17.7. Panel (b) shows the high asymmetry case, 1.2–2.0 with . Curves follow Figure 4. The dashed vertical line marks the injected value. In (a) the recovered posteriors remain biased at SNR 100, since the mass ratio cannot be resolved away from the boundary at . In (b) the mass ratio is far enough from that boundary for the data to recover it, and the posteriors converge toward the injection. The corresponding medians and 90% credible intervals are listed in Table I.
| SNR | Prior | Intermediate asymmetry, 1.8–1.6 M | High asymmetry, 1.2–2.0 M | ||
| 8 | Implied Uniform | 0.929 [0.828, 0.993] | 89.4 [22.5, 1843.6] | 0.647 [0.600, 0.879] | 198.0 [51.4, 1970.2] |
| Magnall et al. [44] | 0.952 [0.874, 0.995] | 151.9 [101.4, 218.0] | 0.676 [0.633, 0.747] | 289.5 [195.8, 444.5] | |
| Goldilocks prior | 0.932 [0.835, 0.993] | 57.0 [14.4, 125.4] | 0.632 [0.595, 0.708] | 137.9 [33.4, 352.8] | |
| 10 | Implied Uniform | 0.937 [0.844, 0.994] | 65.5 [18.6, 1178.7] | 0.631 [0.598, 0.694] | 148.1 [42.1, 337.8] |
| Magnall et al. [44] | 0.957 [0.886, 0.996] | 132.7 [89.1, 184.4] | 0.664 [0.631, 0.711] | 261.8 [176.9, 373.6] | |
| Goldilocks prior | 0.937 [0.845, 0.993] | 51.7 [12.7, 109.9] | 0.623 [0.595, 0.669] | 112.6 [26.1, 252.3] | |
| 15 | Implied Uniform | 0.944 [0.866, 0.994] | 48.3 [14.8, 92.7] | 0.618 [0.597, 0.647] | 100.8 [27.4, 197.4] |
| Magnall et al. [44] | 0.965 [0.901, 0.997] | 103.6 [49.3, 137.8] | 0.647 [0.625, 0.674] | 209.8 [149.5, 287.5] | |
| Goldilocks prior | 0.942 [0.862, 0.994] | 41.7 [11.4, 85.1] | 0.614 [0.595, 0.640] | 84.9 [18.6, 170.7] | |
| 30 | Implied Uniform | 0.945 [0.882, 0.995] | 37.2 [13.5, 62.3] | 0.607 [0.597, 0.620] | 57.2 [18.1, 108.1] |
| Magnall et al. [44] | 0.951 [0.884, 0.995] | 39.8 [13.8, 79.4] | 0.623 [0.600, 0.637] | 125.2 [29.5, 174.4] | |
| Goldilocks prior | 0.944 [0.881, 0.995] | 34.2 [11.1, 59.9] | 0.606 [0.595, 0.620] | 53.7 [11.2, 104.5] | |
| 100 | Implied Uniform | 0.908 [0.882, 0.959] | 21.1 [6.9, 38.4] | 0.601 [0.597, 0.605] | 30.4 [13.5, 48.4] |
| Magnall et al. [44] | 0.908 [0.883, 0.959] | 20.9 [7.7, 38.5] | 0.601 [0.597, 0.605] | 30.0 [14.0, 47.9] | |
| Goldilocks prior | 0.906 [0.881, 0.955] | 20.0 [6.4, 36.9] | 0.600 [0.596, 0.605] | 27.1 [10.0, 46.8] |
Table 1. TABLE I. Recovered and for the two asymmetric systems, quoted as median with 90% credible interval. The intermediate case has and , the high asymmetry case and .
At SNR 8, the Goldilocks prior recovers , while the implied uniform prior gives and Magnall et al. [44] gives . The implied uniform prior is very broad, reflecting a second mode at high that lies outside the range plotted in Figure 6(a). The posteriors at SNR 10 are qualitatively similar. Across both SNRs the reweighted posterior peaks nearest the injected value and appears to recover it best of the four. This agreement is not a consequence of the data, and understanding the reason behind it requires analysing the inferred posterior.
The true mass ratio for this system is . As Table 1 shows, the recovered is biased toward unity at every SNR, with the injected value lying inside the 90% interval but near its lower edge in several cases. Sampling uniformly in favours symmetric configurations, biasing toward unity, and because the true value already lies close to the boundary, the posterior additionally rails against the hard limit at . Both effects make the system appear more symmetric than it is unless the SNR is high enough to resolve the posterior away from the boundary. Through the dependence of on in (2), this bias toward higher pushes above the injected value. The effect persists to SNR 100, where the implied uniform, Magnall et al. [44], and Goldilocks prior posteriors converge on , roughly twice the injection. It is common to all three priors, and unbiased recovery of for slightly asymmetric systems requires progressively higher SNR.
The reweighted posterior is the exception, and the reason exposes a limitation of the method. The prior is identical across all three full Bayesian analyses and has support throughout the relevant range, so all three recover qualitatively similar posteriors from the data, as shown in Table 1. Reweighting is a post-processing step applied afterwards, and its importance weight is a function of both and . As it lowers , it lowers in tandem, pulling the mass ratio below the value the three analyses agree on and opposite to the prior-driven bias toward present in all of them. We conclude that had already been faithfully sampled, and reweighting displaces it.
Reweighting can therefore move both and in ways not supported by the data. Its downward shift in happens to counter the upward bias present in the other three priors, so the reweighted posterior peaks near the injected value. This apparent accuracy is a byproduct of displacing the posterior that had already been faithfully sampled, not a faithful recovery by itself. The method is therefore unreliable in this regime, independent of whether it happens to agree with the injected in a given case.
The high asymmetry case shows the same ranking of the priors, but with a different high-SNR outcome. For the 1.2–2.0 system, the true mass ratio is , far from the boundary at unity, and we inject . Figure 6(b) shows the recovered posteriors.
At low SNRs, the posterior is again biased toward higher values, because sampling uniformly in favours symmetric configurations and pushes toward unity regardless of the true value. Through Eq. (2) this displaces upward, and the priors rank as before, with the reweighted posterior peaking nearest the injection and the other three biased high. At SNR 8, the Goldilocks prior recovers [33.4, 352.8], against 198.0 [51.4, 1970.2] under the implied uniform prior and 289.5 [195.8, 444.5] under Magnall et al. [44], and is the closest of the four to the injection.
Unlike the intermediate case, this system resolves as the SNR increases. The recovered falls from 0.632 at SNR 8 to 0.600 [0.596, 0.605] at SNR 100, an interval that contains the true value, and follows, reaching 27.1 [10.0, 46.8] under the Goldilocks prior against the injection of 25. As the true mass ratio lies well away from the boundary, the prior preference for symmetry is not reinforced by a rail against , and the data recover once the signal is sufficiently loud. The reweighted posterior again peaks near the injection at low SNR, but this reflects the same downward displacement of and under reweighting, not a faithful recovery.
Spinning system tests
The analyses so far have held the component spins fixed. Spin enters the waveform at lower post-Newtonian order than the tidal terms, and can influence the recovery of through the spin-induced quadrupole moment [78, 79]. We therefore repeat the symmetric – study with the spins sampled, extending the parameter space to the six dimensions . We consider two cases. The first uses a low-spin prior with aligned component spins restricted to , twice the width of the standard low-spin prior of Section II, so that the expected spins of merging BNSs lie well inside the sampled range; the injected spins are . The second injects and samples under a high-spin prior allowing .
Figure 7(a) shows the low-spin case at , across the same network SNRs as Figure 4, so the effect of adding spin can be compared directly against the four-dimensional inference presented earlier. The recovered posteriors are qualitatively indistinguishable from the non-spinning results of Section IV A. The low-spin prior confines the component spins to a narrow range, so the two additional dimensions open few new configurations and leave the tidal recovery essentially unchanged. The GOLDILOCKS PRIOR remains closest to the injection across the sweep, while the reweighted posterior again develops spurious support at low and remains rough even at SNR 100. The behaviour established for the non-spinning symmetric system therefore carries over directly once low spins are included.
Figure 7. Recovered posteriors for the symmetric 1.4–1.4 M system with spins sampled, at network SNRs of 8, 10, 15, 30 and 100 (left to right), both at . Panel (a) shows the low-spin case, . Panel (b) shows the high-spin case, . Curves follow Figure 4. The dashed vertical line marks the injected value. In the low-spin case, the recovered posteriors match the non-spinning results of Section IV A. In the high-spin case, the Goldilocks prior recovers the injection across the full SNR range, while the implied uniform and reweighted posteriors trail to the upper edge of the prior at and the prior of Magnall et al. [44] sits in a separate high mode. The full set of parameters for the high-spin case is shown in Figure 12.
Panel (b) shows the high-spin case, with both components at . Here the differences between the priors are at their most pronounced in all considered cases. The implied uniform and reweighted posteriors fail to recover at any SNR, railing instead to the upper edge of the prior near , while the GOLDILOCKS PRIOR holds the injection throughout and the prior of Magnall et al. [44] sits in a separate high mode. The failure of the uniform priors is not confined to . As shown in Figure 12, every parameter is recovered incorrectly together. is the leading-order parameter, and when it is incorrectly recovered, the rest of the parameters are all affected due to correlations. For the uniform priors, the recovered is biased high, corresponding to a heavier and therefore shorter signal. As and are inversely correlated, compensating for the too-heavy , the sampler drives the spins strongly negative as shown in Figure 12. Similar correlations drive to large values, and with no EoS information to bound the tidal deformability, runs to an arbitrary high value at the prior boundary. is correspondingly pulled toward high asymmetry. The result is a self-consistent but entirely unphysical solution across all six parameters.
Figure 12. Recovered posteriors for the high-spin symmetric 1.4–1.4 system with and , at network SNRs of 8, 10, 15, 30 and 100 (left to right). Rows show the source-frame chirp mass , the mass ratio , the reduced tidal deformability , and the two component spins and . The recovered for this system is shown in Figure 7(b). Curves follow Figure 4, and dashed vertical lines mark the injected values. Under the implied uniform and reweighted priors, every parameter is recovered incorrectly, and together, the biased high, toward strong asymmetry, and both s toward large negative values, the inverse correlations that reproduce a similarly short waveform. The prior of Magnall et al. [44] recovers correctly but is offset in and the spins. The Goldilocks prior is the only prior that recovers all parameters consistently with their injected values across the full SNR range.
The EoS-informed priors avoid this. Both the GOLDILOCKS PRIOR and the prior of Magnall et al. [44] couple and , so the combination of a heavy with an extreme is disfavoured, which anchors and keeps the remaining parameters in place. This is a clear case in which an EoS-informed prior is not merely an improvement but a requirement for the inference to converge on a physical solution. The GOLDILOCKS PRIOR again outperforms the prior of Magnall et al. [44] in , owing to its noise-broadened support at low and its broader EoS ensemble.
We note that spins of are far higher than expected for merging BNSs. This configuration is included as a stress test of the inference pipeline rather than as a realistic source. We strongly emphasise through these high-spin results that the pipeline itself fails in this regime unless the prior carries EoS information, independent of whether such a system is astrophysically likely.
Improvements in the chirp mass constraints
We conclude from the results in Section IV A and Section IV B that the GOLDILOCKS PRIOR is the most robust prior for unbiased inference of across multiple scenarios. As and are inherently correlated, achieving unbiased constraints also reduces uncertainty in the posterior. To illustrate this effect, we present the source-frame posteriors for all priors, assuming , in Figure 8. All chirp mass results in this work are quoted in the source frame; the conversion from the detector frame is described in Appendix C.
Figure 8. Source-frame posteriors for a symmetric 1.4–1.4 BNS injection with , at network SNRs of 8, 10, 15, 30 and 100 (left to right). Curves follow Figure 4. The dashed vertical line marks the injected value. At SNR 30 and 100 all four priors recover without significant bias. At the three lower SNRs the prior of Magnall et al. [44] is shifted toward lower , following from the overestimation seen in Figure 5 and the correlation between the two parameters. This highlights the importance of using physically informed priors that maintain unbiased inference in both and correlated parameters like .
For BNS GW signals, is the best-constrained parameter, and thus the posteriors on it are already narrow, as seen in Figure 8. At SNR 30 and 100 all four priors recover without significant bias, consistent with the unbiased values recovered at those SNRs. At SNR 8, 10 and 15, however, the prior of Magnall et al. [44] produces a considerably biased posterior, as seen in Figure 5. This bias propagates to , leading to an underestimated constraint corresponding to the overestimated value. This demonstrates why broader, yet physically informed priors are important, not only for unbiased posteriors but also for their indirect effect on inference.
Improvements in the reduced tidal deformability constraints
As highlighted in Section II, can be an important parameter for inference, as better measurement of also improves the resolution of the individual . Figure 9 shows the posteriors for the symmetric – injection with , across the SNR range considered. Since GOLDILOCKS PRIOR is a four-dimensional prior with a physically consistent treatment of , its posterior is the narrowest among all priors considered at every SNR. The uniform and Magnall et al. [44] priors also correctly recover the value peaking at 0, but are significantly broader.
Figure 9. Posterior distributions of for the symmetric 1.4–1.4 BNS injection with , at network SNRs of 8, 10, 15, 30 and 100 (left to right). Curves follow Figure 4. The dashed vertical line marks the injected value, . The Goldilocks prior, which treats as a dimension of the joint prior, produces the narrowest posterior at every SNR. The implied uniform prior, its reweighted counterpart, and the prior of Magnall et al. [44] all recover a posterior peaked at zero, but substantially broader.
Conclusions
BNS GW detections are critically important not only for GW astrophysics but also for cosmology, nuclear physics, quantum chromodynamics, and many other related fields. As GWs constrain a unique parameter, the tidal deformability , the constraints obtained from BNS observations are of paramount importance for both multimessenger analyses and theoretical studies based on these observations. Regardless of the type of BNS observed, systematic biases arising from the choice of priors can significantly impact downstream analyses that rely on GW constraints. Uniform priors are widely used in the literature for standard BNS analyses. However, because these priors treat masses and tidal parameters independently, despite their inherent correlations, and largely disregard the parameter, they can lead to unphysical results and biased estimates of NS properties. Similarly, other studies have proposed physics-informed priors based on EoS ensembles. Due to the improper treatment of and the strong influence of the chosen EoS ensemble, these approaches can also produce biased results. We demonstrate these limitations, along with the unreliability of correcting uniform-prior posteriors by reweighting, in detail in Section II.
Our approach toward an unbiased prior for BNS analyses focuses on incorporating physical information from EoSs while ensuring that the data itself remains informative. We account for detector sensitivity, the presence of noise, and the joint nature of tidal parameters, avoiding overconstraining the data with prior assumptions. In this work, we present Goldilocks prior, which integrates all of these considerations as described in § 1.2.
To test the robustness of priors, we perform extensive mock BNS injections designed to challenge each prior, revealing where unphysical results or overly broad constraints may arise. We compare four priors, the implied uniform prior, its reweighted counterpart, the prior of Magnall et al. [44], and the Goldilocks prior, for a symmetric 1.4–1.4 system (Section IV A), two asymmetric systems of 1.8–1.6 and 1.2–2.0 (Section IV B), and spinning systems (Section IV C), and we evaluate the effect on the and posteriors (Section IV D and Section IV E). Across these tests the Goldilocks prior is the only prior to recover without the boundary-driven bias of the implied uniform prior, the ensemble-driven bias of Magnall et al. [44], or the sampling artefacts of reweighting. The high-spin configuration is the most demanding case, where the uniform priors fail across every parameter and only the EoS-informed priors return a physical solution. The Goldilocks prior performs the best even in this extreme case.
Some limitations persist independently of the chosen prior. For slightly asymmetric systems, the mass ratio rails against the boundary at , biasing towards higher values until the SNR is large enough to resolve it, an effect common to every prior used. Reweighting the uniform prior posterior is separately unreliable, since it can displace both and in ways the data do not support. Neither effect is remedied by the Goldilocks prior, but it alone avoids the prior-driven biases while retaining support in the low- region that the data may favour. By providing this for both and correlated parameters such as and , the Goldilocks prior establishes a robust framework for tidal parameter estimation in BNS analyses. Beyond this study using mock injections, we release a companion paper applying the Goldilocks prior to real BNS events, illustrating its utility in extracting reliable neutron star properties from observational data.
This study has broad implications, including extensions to NSBH systems, the effect of future LVK upgrades and next-generation detectors, impacts on EoS model selection, and many others. We hope that the use of Goldilocks prior will be an important step toward unravelling the properties of the densest matter in the universe.
Acknowledgments
For insightful discussions and feedback, we thank K. G. Arun, Nils Andersson, Jolien Creighton, Nathan Johnson-McDaniel and Jocelyn Read. We also thank Colm Talbot for help in the development of the first joint prior templates implemented in bilby. This research is supported by National Science Foundation grants AST-2307147, PHY-2308886, PHY-2309064, PHY 2608011 and AST-2606673.
References
Fisher Analysis
For this study, we focus on calculating the expected uncertainty in , denoted , as a function of the true of the BNS system under analysis. Since this is inherently dependent on GW detector sensitivity, we estimate in a systematic manner using the Fisher information formalism. Here, the aLIGO power spectral density curve constructed for O4 ([80]) is used to simulate the sensitivities of LIGO Hanford and LIGO Livingston, while the Advanced Virgo design sensitivity curve is used to simulate Virgo ([81]). For a detailed discussion of the Fisher approach in GW data analysis, the reader is referred to Refs. [78, 82].
It is not suitable to use an astrophysically motivated population to compute , as realistic astrophysical merger rates are too low to robustly establish a versus relationship. As an alternative, we simulate 10,000 representative BNS events using the uniform mass grid described in § 1.2 C. For each event, the EoS ensemble described in § 1.2 A is used to sample the corresponding and values. All signals are injected at a fiducial distance of 131 Mpc, chosen as the maximum of the derivative of the detector efficiency curve for the HLV network considered here. Since most events are expected near this distance, we use 131 Mpc for our Fisher injections to generate a representative sample of SNRs, providing a meaningful estimate of the average behaviour of the detector. All other source parameters, apart from masses and tidal deformabilities, are kept fixed to enable a meaningful comparison.
We employ the Fisher matrix formalism [78, 82] to empirically derive the distribution of uncertainties in GW source parameters and SNRs for our assumed BNS population. While Bayesian inference is generally preferred for estimating uncertainties, the Fisher approach is computationally efficient and well-suited for the large number of events considered here.
To ensure consistency, the IMRPhenomXAS NRTidalv3 waveform model is used in the Fisher analysis. We evaluate for the current-generation LVK detector network. The expected variation of as a function of the injected is shown in Figure 10.
Figure 10. Variation of with respect to the true injected for the analysis. The colour variation depicts the SNRs of the considered signals.
Origin of the Induced Prior on the Tidal Deformability
In this appendix, we provide a simple physical argument to explain the approximate form of the prior distribution induced on the tidal deformability parameters. This discussion is intended to provide intuition for the structure of the prior and does not replace the numerical prior adopted in the main analysis, which is derived directly from the sampling procedure and shown in Figure 3.
The dimensionless tidal deformability of a NS of mass is given by Eq. (1). For a wide class of realistic EoSs, the NS radius varies only weakly with mass. Under this approximation, the dominant mass dependence of arises from the explicit scaling, with a sub-leading contribution from the mass dependence of the quadrupolar tidal Love number .
Approximating the Love number as a power law in mass, , the tidal deformability scales as
If the component masses are assigned a prior that is uniform, or only slowly varying, over the relevant mass range, this scaling induces an approximately power-law prior on .
In GW analyses, the quantity directly constrained by the waveform is not the individual tidal deformabilities , but the mass-weighted tidal parameter , defined in Eq. (2). This parameter is a linear combination of the individual , weighted by powers of the component masses. Since each exhibits a similar power-law dependence on its corresponding mass, the resulting combination preserves the approximately power-law structure of the induced prior. As a result, the prior distribution of shown in Figure 3 falls off as a power law above its peak, the peak itself being set by the maximum NS mass in the ensemble and the detector-sensitivity broadening.
We emphasise that this derivation relies on simplifying assumptions regarding the mass dependence of the neutron star radius and Love number, and is intended solely as a qualitative explanation. In practice, the prior on used in this work is obtained numerically from the full parameterisation employed in the analysis.
Handling detector and source frame parameters
Using any EoS-motivated or physically motivated prior that samples in source frame parameters requires repeated conversion between source and detector frame, specifically between luminosity distance and redshift . In Bilby, cosmological conversions such as bilby.gw.conversion.luminosity_distance_to_redshift rely on Astropy’s cosmology routines, which perform numerical integration for each call [83]. When the prior is defined in source frame chirp mass rather than detector frame chirp mass, these conversions are invoked for every prior sample, including during normalisation factors such as the constraint factor calculations used in likelihood and prior consistency calculations. For a typical run with millions of samples, this results in tens of thousands of cosmology evaluations per sample, making sampling prohibitively slow without optimisation.
To alleviate this computational bottleneck, we use wcosmo [84], a package developed for accelerated cosmological calculations compatible with Bilby and related inference frameworks. wcosmo implements efficient, grid-based forward and inverse conversions between and that are orders of magnitude faster than repeated numerical integration, enabling fast interpolation of the luminosity distance–redshift relation. In practice, we initialize a tabulated grid spanning the full range of luminosity distances supported by our prior and use this grid for all conversions between and during sampling.
Within Bilby, cosmological conversions are required both in the prior and in the construction of derived quantities, such as source frame masses and redshift from sampled detector frame parameters. Without the grid accelerations provided by wcosmo, these conversions dominate the runtime when the prior samples in source frame, preventing efficient inference. By adopting wcosmo, we retain compatibility with standard Bilby workflows while significantly reducing the computational cost of cosmological conversions necessary for Goldilocks prior and other source-frame priors.
This conversion is implemented for the full parameter space, including the extrinsic parameters of the 13- and 17-dimensional runs that will be sampled in the companion analysis of real events Khadkikar and Sathyaprakash [85]. This implementation does not affect the analysis presented in this manuscript since the luminosity distance is fixed per injection to fix the SNR rather than sampled.
Issues with post-processing the uniform prior
Throughout Section IV we compare against a reweighted uniform posterior, constructed by importance-reweighting samples drawn under the implied uniform prior to mimic a true uniform prior. This appendix quantifies why that reweighted posterior is unreliable in the low- regime, supporting the argument made in Section II C.
Reweighting redistributes the samples an analysis has already drawn rather than generating new ones. Each sample is assigned a weight equal to the ratio of the target to the sampling prior, and the effective number of samples there sets the reliability of the reweighted density in any region. The implied uniform prior places little support at low , so a uniform-prior analysis draws few samples in that region, and reweighting must reconstruct the low- posterior by applying large weights to a small number of points.
Figure 11 makes this explicit. The lower panels show the number of raw samples per bin, which falls to single digits in the lowest bins at every SNR. The upper panels show the ratio of the reweighted to the raw density in each bin. This ratio is largest at low , precisely where the samples are fewest. At SNR 8 the largest single-bin amplification is a factor of 10, applied to a bin containing one raw sample. At SNR 10 it reaches a factor of 60 from four samples, and comparable amplifications occur at the higher SNRs. A density reconstructed by amplifying one or a few samples by such factors reflects the sampling noise of those points rather than the underlying distribution, which is the origin of the spurious low- structure seen in the reweighted posteriors throughout Section IV.

Figure 11. Diagnostics for the reweighted uniform posterior of a symmetric 1.4–1.4 system with , at network SNRs of 8, 10, 15, 30 and 100 (left to right). Lower panels show the number of raw samples per bin. Upper panels show the ratio of the reweighted to the raw density per bin, with the largest single-bin amplification annotated. The largest amplifications occur at low , where the raw samples are fewest, reaching factors of 10, 60, 20, 20, and 14 from as few as one to ten samples across the five SNRs. The dotted vertical line marks .
The problem does not diminish with SNR. Even at SNR 100 the largest amplification is a factor of 14 from nine samples, since the loud-signal posterior concentrates at low and the sparsely sampled bins remain sparsely sampled. Reweighting therefore cannot be relied upon to recover the low- region at any SNR considered here.
This limitation could in principle be reduced by increasing the number of live points, so that the sampler populates the low- region more densely before reweighting. The analyses here already use 2048 live points, matching the setting used in LVK compact binary production runs, and raising it further increases the computational cost and wall-clock time of every analysis. The Goldilocks prior provides correct support at low with the same 2048 live points, without any post-processing, and we observe the fastest convergence and consistently accurate recovery among the priors compared. Achieving reliable low- inference is therefore better addressed through the prior itself than through reweighting a uniform-prior posterior.
References
- [1]J. M. Lattimer, Ann. Rev. Nucl. Part. Sci. 62, 485 (2012), arXiv:1305.3510 [nucl-th].DOI
- [2]J. M. Lattimer and M. Prakash, Phys. Rept. 621, 127 (2016), arXiv:1512.07820 [astro-ph.SR].DOI
- [3]M. Oertel, M. Hempel, T. Klähn, and S. Typel, Rev. Mod. Phys. 89, 015007 (2017), arXiv:1610.03361 [astro-ph.HE].DOI
- [4]V. Paschalidis and N. Stergioulas, Living Rev. Rel. 20, 7 (2017), arXiv:1612.03050 [astro-ph.HE].DOI
- [5]F. Özel and P. Freire, Ann. Rev. Astron. Astrophys. 54, 401 (2016), arXiv:1603.02698 [astro-ph.HE].
- [6]G. Baym, T. Hatsuda, T. Kojo, P. D. Powell, Y. Song, and T. Tatsutsuka, Rept. Prog. Phys. 81, 056902 (2018), arXiv:1707.04966 [astro-ph.HE].DOI
- [7]M. Prakash, I. Bombaci, M. Prakash, P. J. Ellis, J. M. Lattimer, and R. Knorr en, Phys. Rept. 280, 1 (1997), arXiv:nucl-th/9603042.DOI
- [8]B. F. Schutz, Class. Quant. Grav. 16, A131 (1999), arXiv:gr-qc/9911034.DOI
- [9]J. S. Read, C. Markakis, M. Shibata, K. Uryu, J. D. E. Creighton, and J. L. Friedman, Phys. Rev. D 79, 124033 (2009), arXiv:0901.3258 [gr-qc].DOI
- [10]J. Aasi et al. (LIGO Scientific), Class. Quant. Grav. 32, 074001 (2015), arXiv:1411.4547 [gr-qc].
- [11]F. Acernese et al. (VIRGO), Class. Quant. Grav. 32, 024001 (2015), arXiv:1408.3048 [gr-qc].
- [12]T. Akutsu et al. (KAGRA), PTEP 2021, 05A101 (2021), arXiv:2005.05574 [physics.ins-det].arxiv.org/abs/2005.05574
- [13]B. P. Abbott et al. (LIGO Scientific, Virgo), Phys. Rev. X 9, 031040 (2019), arXiv:1811.12907 [astro-ph.HE].DOI
- [14]R. Abbott et al. (LIGO Scientific, Virgo), Phys. Rev. X 11, 021053 (2021), arXiv:2010.14527 [gr-qc].DOI
- [15]R. Abbott et al. (KAGRA, VIRGO, LIGO Scientific), Phys. Rev. X 13, 041039 (2023), arXiv:2111.03606 [gr-qc].DOI
- [16]A. G. Abac et al. (LIGO Scientific, VIRGO, KAGRA), “GWTC-4.0: Updating the Gravitational-Wave Transient Catalog with Observations from the First Part of the Fourth LIGO-Virgo-KAGRA Observing Run,” (2025), submitted to ApJ Lett., arXiv:2508.18082 [gr-qc].
- [17]B. Farr et al., Astrophys. J. 825, 116 (2016), arXiv:1508.05336 [astro-ph.HE].DOI
- [18]K. Chattopadhyay, Gen. Rel. Grav. 52, 109 (2020), arXiv:2006.03168 [gr-qc].
- [19]L. Blanchet, Living Rev. Rel. 17, 2 (2014), arXiv:1310.1528 [gr-qc].arxiv.org/abs/1310.1528
- [20]E. E. Flanagan and T. Hinderer, Phys. Rev. D 77, 021502 (2008), arXiv:0709.1915 [astro-ph].DOI
- [21]T. Hinderer, Astrophys. J. 677, 1216 (2008), [Erratum: Astrophys. J. 697, 964 (2009)], arXiv:0711.2420 [astro-ph].DOI
- [22]M. Favata, Phys. Rev. Lett. 112, 101101 (2014), arXiv:1310.8288 [gr-qc].DOI
- [23]B. P. Abbott et al. (LIGO Scientific, Virgo), Phys. Rev. X 9, 011001 (2019), arXiv:1805.11579 [gr-qc].DOI
- [24]D. Reitze et al., Bull. Am. Astron. Soc. 51, 035 (2019), arXiv:1907.04833 [astro-ph.IM].arxiv.org/abs/1907.04833
- [25]M. Evans et al., “A Horizon Study for Cosmic Explorer: Science, Observatories, and Community,” (2021), arXiv:2109.09882 [astro-ph.IM].arxiv.org/abs/2109.09882
- [26]B. P. Abbott et al. (LIGO Scientific), Class. Quant. Grav. 34, 044001 (2017), arXiv:1607.08697 [astro-ph.IM].DOI
- [27]M. Punturo et al., Class. Quant. Grav. 27, 084007 (2010).
- [28]S. Hild et al., Class. Quant. Grav. 28, 094013 (2011), arXiv:1012.0908 [gr-qc].DOI
- [29]M. Maggiore et al. (ET), JCAP 03, 050 (2020), arXiv:1912.02622 [astro-ph.CO].
- [30]I. Gupta et al., Class. Quant. Grav. 41, 245001 (2024), arXiv:2307.10421 [gr-qc].arxiv.org/abs/2307.10421
- [31]S. Khadkikar, I. Gupta, R. Kashyap, K. Chandra, R. Gamba, and B. S. Sathyaprakash, Phys. Rev. D 112, 063020 (2025), arXiv:2502.03463 [astro-ph.HE].arxiv.org/abs/2502.03463
- [32]T. Hinderer, B. D. Lackey, R. N. Lang, and J. S. Read, Phys. Rev. D 81, 123016 (2010), arXiv:0911.3535 [astro-ph.HE].DOI
- [33]S. Biscoveanu, Nature Rev. Phys. 4, 5 (2022).
- [34]D. Chattopadhyay, S. Al-Shamali, F. Antonini, S. Fairhurst, B. Miles, and V. Raymond, Mon. Not. Roy. Astron. Soc. 536, L19 (2024), arXiv:2407.08719 [astro-ph.HE].DOI
- [35]V. Prasad and B. S. Sathyaprakash, “Are black hole spins truly near-zero?” (2026), arXiv:2602.12859 [gr-qc].
- [36]L. Lindblom, Phys. Rev. D 82, 103011 (2010), arXiv:1009.0738 [astro-ph.HE].DOI
- [37]J. Margueron, R. Hoffmann Casali, and F. Gulminelli, Phys. Rev. C 97, 025805 (2018), arXiv:1708.06894 [nucl-th].DOI
- [38]J. Tews, J. Carlson, S. Gandolfi, and S. Reddy, Astrophys. J. 860, 149 (2018), arXiv:1801.01923 [nucl-th].DOI
- [39]S. K. Greif, G. Raaijmakers, K. Hebeler, A. Schwenk, and A. L. Watts, Mon. Not. Roy. Astron. Soc. 485, 5363 (2019), arXiv:1812.08188 [astro-ph.HE].DOI
- [40]P. Landry and R. Essick, Phys. Rev. D 99, 084049 (2019), arXiv:1811.12529 [gr-qc].DOI
- [41]T. Gorda, O. Komoltsev, and A. Kurkela, Astrophys. J. 950, 107 (2023), arXiv:2204.11877 [nucl-th].DOI
- [42]D. Mroczek, M. C. Miller, J. Noronha-Hostler, and N. Yunes, J. Phys. Conf. Ser. 2536, 012006 (2023), arXiv:2302.07978 [astro-ph.HE].arxiv.org/abs/2302.07978
- [43]S. Ng, I. Legred, L. Suleiman, P. Landry, L. Traylor, and J. Read, Class. Quant. Grav. 42, 205008 (2025), arXiv:2507.03232 [astro-ph.HE].DOI
- [44]S. J. Magnall, C. Ecker, L. Rezzolla, P. D. Lasky, and S. R. Goode, Astrophys. J. Lett. 988, L75 (2025), arXiv:2504.21526 [astro-ph.HE].arxiv.org/abs/2504.21526
- [45]L. Wade, J. D. E. Creighton, E. Ochsner, B. D. Lackey, B. F. Farr, T. B. Littenberg, and V. Raymond, Phys. Rev. D 89, 103012 (2014), arXiv:1402.5156 [gr-qc].DOI
- [46]T. Wouters, P. T. H. Pang, T. Dietrich, and C. Van Den Broeck, Phys. Rev. D 114, 043005 (2026), arXiv:2511.22987 [astro-ph.HE].arxiv.org/abs/2511.22987
- [47]G. Pratten, S. Husa, C. Garcia-Quiros, M. Colleoni, A. Ramos-Buades, H. Estelles, and R. Jaume, Phys. Rev. D 102, 064001 (2020), arXiv:2001.11412 [gr-qc].DOI
- [48]A. Abac, T. Dietrich, A. Buonanno, J. Steinhoff, and M. Ujevic, Phys. Rev. D 109, 024062 (2024), arXiv:2311.07456 [gr-qc].DOI
- [49]B. Ewing et al., Phys. Rev. D 109, 042008 (2024), arXiv:2305.05625 [gr-qc].arxiv.org/abs/2305.05625
- [50]M. Burgay et al., Nature 426, 531 (2003), arXiv:astro-ph/0312071.DOI
- [51]K. Stovall et al., Astrophys. J. Lett. 854, L22 (2018), arXiv:1802.01707 [astro-ph.HE].DOI
- [52]B. P. Abbott et al. (LIGO Scientific, Virgo), Astrophys. J. Lett. 892, L3 (2020), arXiv:2001.01761 [astro-ph.HE].DOI
- [53]A. Akmal, V. R. Pandharipande, and D. G. Ravenhall, Phys. Rev. C 58, 1804 (1998), arXiv:nucl-th/9804027.DOI
- [54]F. Douchin and P. Haensel, Astron. Astrophys. 380, 151 (2001), arXiv:astro-ph/0111092.
- [55]P. Fritschel, K. Kuns, J. Driggers, A. Effler, B. Lantz, D. Ottaway, S. Ballmer, K. Dooley, R. Adhikari, M. Evans, B. Farr, G. Gonzalez, P. Schmidt, and S. Raja, Report from the LSC Post-O5 Study Group, Tech. Rep. T2200287 (LIGO, 2022).
- [56]B. P. Abbott et al. (LIGO Scientific, Virgo), Phys. Rev. Lett. 121, 161101 (2018), arXiv:1805.11581 [gr-qc].DOI
- [57]J. Antoniadis et al., Science 340, 6131 (2013), arXiv:1304.6875 [astro-ph.HE].DOI
- [58]H. T. Cromartie et al. (NANOGrav), Nature Astron. 4, 72 (2019), arXiv:1904.06759 [astro-ph.HE].DOI
- [59]E. Fonseca et al., Astrophys. J. Lett. 915, L12 (2021), arXiv:2104.00880 [astro-ph.HE].DOI
- [60]P. J. Huber, The Annals of Mathematical Statistics 35, 73 (1964).
- [61]P. J. Huber, The Annals of Mathematical Statistics 36, 1753 (1965).
- [62]T. Zhao and J. M. Lattimer, Phys. Rev. D 98, 063020 (2018), arXiv:1808.02858 [astro-ph.HE].DOI
- [63]K.-L. Leung, M.-c. Chu, and L.-M. Lin, Phys. Rev. D 105, 123010 (2022), arXiv:2207.02433 [astro-ph-HE].DOI
- [64]S. Altiparmak, C. Ecker, and L. Rezzolla, Astrophys. J. Lett. 939, L34 (2022), arXiv:2203.14974 [astro-ph.HE].DOI
- [65]C. Ecker and L. Rezzolla, Mon. Not. Roy. Astron. Soc. 519, 2615 (2022), arXiv:2209.08101 [astro-ph.HE].DOI
- [66]I. M. Romero-Shaw et al., Mon. Not. Roy. Astron. Soc. 499, 3295 (2020), arXiv:2006.00714 [astro-ph.IM].
- [67]G. Ashton et al., Astrophys. J. Suppl. 241, 27 (2019), arXiv:1811.02042 [astro-ph.IM].DOI
- [68]LIGO Scientific Collaboration, Virgo Collaboration, and KAGRA Collaboration, “LVK Algorithm Library - LALSuite,” Free software (GPL) (2018).
- [69]K. Wette, SoftwareX 12, 100634 (2020).
- [70]J. S. Speagle, Mon. Not. Roy. Astron. Soc. 493, 3132 (2020), arXiv:1904.02180 [astro-ph.IM].DOI
- [71]N. J. Cornish, “Fast Fisher Matrices and Lazy Likelihoods,” (2010), arXiv:1007.4820 [gr-qc].arxiv.org/abs/1007.4820
- [72]N. J. Cornish, Phys. Rev. D 104, 104054 (2021), arXiv:2109.02728 [gr-qc].DOI
- [73]B. Zackay, L. Dai, and T. Venumadhav, “Relative Binning and Fast Likelihood Evaluation for Gravitational Wave Parameter Estimation,” (2018), arXiv:1806.08792 [astro-ph.IM].arxiv.org/abs/1806.08792
- [74]M. Vallisneri, Phys. Rev. D 77, 042001 (2008), arXiv:gr-qc/0703086.DOI
- [75]C. L. Rodriguez, B. Farr, V. Raymond, W. M. Farr, T. B. Littenberg, D. Fazi, and V. Kalogera, Astrophys. J. 784, 119 (2014), arXiv:1309.3273 [astro-ph.HE].DOI
- [76]S. Nissanke, D. E. Holz, S. A. Hughes, N. Dalal, and J. L. Sievers, Astrophys. J. 725, 496 (2010), arXiv:0904.1017 [astro-ph.CO].DOI
- [77]S. Khadkikar and D. Singh, Phys. Rev. D 113, 023029 (2026), arXiv:2507.07895 [astro-ph.HE].arxiv.org/abs/2507.07895
- [78]E. Poisson and C. M. Will, Phys. Rev. D 52, 848 (1995), arXiv:gr-qc/9502040.DOI
- [79]E. Poisson, Phys. Rev. D 57, 5287 (1998), arXiv:gr-qc/9709032.DOI
- [80]LIGO Scientific Collaboration, Advanced LIGO Hanford at Design Sensitivity, Tech. Rep. LIGO-T980044-10 (LIGO, n.d.).
- [81]LIGO Scientific Collaboration, Advanced LIGO at Design Sensitivity, Tech. Rep. LIGO-P1200087-v42 (LIGO, 2012) based on Table 1 of arXiv:gr-qc/0008066.
- [82]C. Cutler and E. E. Flanagan, Phys. Rev. D 49, 2658 (1994), arXiv:gr-qc/9402014.DOI
- [83]T. P. Robitaille et al. (Astropy), Astron. Astrophys. 558, A33 (2013), arXiv:1307.6212 [astro-ph.IM].DOI
- [84]“wcosmo: Efficient cosmology routines compatible with numpy-like backends,” https://pypi.org/project/wcosmo/ (2025), accessed 2026.
- [85]S. Khadkikar and B. S. Sathyaprakash, “Reanalysis of gw170817 and gw190425 under the goldilocks prior,” (2026), will be published along with this paper.arxiv.org/abs/2611.07147










